fate.txt File Reference

Variables
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this	website
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of	CPU
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory **********************************************If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source	directory
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory **********************************************If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the	test
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory **********************************************If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server ****************************************************************To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your	needs
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory **********************************************If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server ****************************************************************To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet	used
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory **********************************************If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server ****************************************************************To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern< arch >< os >< compiler >< compiler version > The configuration file itself will be sourced in a shell	script
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory **********************************************If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server ****************************************************************To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern< arch >< os >< compiler >< compiler version > The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration	file
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory **********************************************If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server ****************************************************************To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern< arch >< os >< compiler >< compiler version > The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration it may help to try out the ssh command with one or more v options You should get detailed output concerning your SSH configuration and the authentication process The only thing left is to automate the execution of the fate sh script and the synchronisation of the samples directory FATE makefile targets and variables *************************************Makefile	targets
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory **********************************************If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server ****************************************************************To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern< arch >< os >< compiler >< compiler version > The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration it may help to try out the ssh command with one or more v options You should get detailed output concerning your SSH configuration and the authentication process The only thing left is to automate the execution of the fate sh script and the synchronisation of the samples directory FATE makefile targets and variables *************************************Makefile can be set	to
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory **********************************************If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server ****************************************************************To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern< arch >< os >< compiler >< compiler version > The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration it may help to try out the ssh command with one or more v options You should get detailed output concerning your SSH configuration and the authentication process The only thing left is to automate the execution of the fate sh script and the synchronisation of the samples directory FATE makefile targets and variables *************************************Makefile can be set or it has a meaning only while running the regression tests THREADS Specify how many threads to use while running regression	tests
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory **********************************************If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server ****************************************************************To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern< arch >< os >< compiler >< compiler version > The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration it may help to try out the ssh command with one or more v options You should get detailed output concerning your SSH configuration and the authentication process The only thing left is to automate the execution of the fate sh script and the synchronisation of the samples directory FATE makefile targets and variables *************************************Makefile can be set or it has a meaning only while running the regression tests THREADS Specify how many threads to use while running regression it is quite useful to detect thread related regressions THREAD_TYPE Specify which threading strategy either SLICE or	FRAME
FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory **********************************************If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server ****************************************************************To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern< arch >< os >< compiler >< compiler version > The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration it may help to try out the ssh command with one or more v options You should get detailed output concerning your SSH configuration and the authentication process The only thing left is to automate the execution of the fate sh script and the synchronisation of the samples directory FATE makefile targets and variables *************************************Makefile can be set or it has a meaning only while running the regression tests THREADS Specify how many threads to use while running regression it is quite useful to detect thread related regressions THREAD_TYPE Specify which threading strategy either SLICE or by default SLICE FRAME CPUFLAGS Specify CPU flags TARGET_EXEC Specify or override the wrapper used to run the tests The TARGET_EXEC option provides a way to run FATE wrapped in	valgrind

Variable Documentation

FFmpeg Automated Testing Environment************************************ Table of Contents***************** FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction************** FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of CPU

Definition at line 34 of file fate.txt.

FFmpeg Automated Testing Environment************************************ Table of Contents***************** FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction************** FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory********************************************** If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source directory

Definition at line 34 of file fate.txt.

FFmpeg Automated Testing Environment************************************ Table of Contents***************** FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction************** FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory********************************************** If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server**************************************************************** To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern<arch><os><compiler><compiler version> The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration file

Definition at line 34 of file fate.txt.

Referenced by add_file(), av_register_all(), concat_read_header(), get_bits_left(), get_fourcc(), get_sr_golomb_shorten(), handle_file(), open_file(), put_s(), and report_new_stream().

FFmpeg Automated Testing Environment************************************ Table of Contents***************** FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction************** FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory********************************************** If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server**************************************************************** To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern<arch><os><compiler><compiler version> The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration it may help to try out the ssh command with one or more v options You should get detailed output concerning your SSH configuration and the authentication process The only thing left is to automate the execution of the fate sh script and the synchronisation of the samples directory FATE makefile targets and variables************************************* Makefile can be set or it has a meaning only while running the regression tests THREADS Specify how many threads to use while running regression it is quite useful to detect thread related regressions THREAD_TYPE Specify which threading strategy either SLICE or FRAME

Definition at line 142 of file fate.txt.

FFmpeg Automated Testing Environment************************************ Table of Contents***************** FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction************** FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory********************************************** If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server**************************************************************** To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your needs

Definition at line 34 of file fate.txt.

Referenced by mc_block().

FFmpeg Automated Testing Environment************************************ Table of Contents***************** FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction************** FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory********************************************** If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server**************************************************************** To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern<arch><os><compiler><compiler version> The configuration file itself will be sourced in a shell script

Definition at line 34 of file fate.txt.

Referenced by parse_script().

FFmpeg Automated Testing Environment************************************ Table of Contents***************** FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction************** FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory********************************************** If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server**************************************************************** To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern<arch><os><compiler><compiler version> The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration it may help to try out the ssh command with one or more v options You should get detailed output concerning your SSH configuration and the authentication process The only thing left is to automate the execution of the fate sh script and the synchronisation of the samples directory FATE makefile targets and variables************************************* Makefile targets

Initial value:

====================

`fate-rsync'
     Download/synchronize sample files to the configured samples
     directory.

`fate-list'
     Will list all fate/regression test targets.

`fate'
     Run the FATE test suite (requires the fate-suite dataset).

4.2 Makefile variables
======================

`V'
     Verbosity level

Definition at line 142 of file fate.txt.

FFmpeg Automated Testing Environment ************************************Table of Contents *****************FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction **************FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory **********************************************If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server ****************************************************************To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern< arch >< os >< compiler >< compiler version > The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration it may help to try out the ssh command with one or more v options You should get detailed output concerning your SSH configuration and the authentication process The only thing left is to automate the execution of the fate sh script and the synchronisation of the samples directory FATE makefile targets and variables *************************************Makefile can be set or it has a meaning only while running the regression tests THREADS Specify how many threads to use while running regression it is quite useful to detect thread related regressions THREAD_TYPE Specify which threading strategy test

Definition at line 34 of file fate.txt.

Referenced by audio_read_header(), audio_read_packet(), av_hmac_calc(), main(), start_jack(), and supply_new_packets().

FFmpeg Automated Testing Environment************************************ Table of Contents***************** FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction************** FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory********************************************** If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server**************************************************************** To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern<arch><os><compiler><compiler version> The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration it may help to try out the ssh command with one or more v options You should get detailed output concerning your SSH configuration and the authentication process The only thing left is to automate the execution of the fate sh script and the synchronisation of the samples directory FATE makefile targets and variables************************************* Makefile can be set or it has a meaning only while running the regression tests THREADS Specify how many threads to use while running regression tests

Definition at line 142 of file fate.txt.

FFmpeg Automated Testing Environment************************************ Table of Contents***************** FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction************** FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory********************************************** If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server**************************************************************** To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern<arch><os><compiler><compiler version> The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration it may help to try out the ssh command with one or more v options You should get detailed output concerning your SSH configuration and the authentication process The only thing left is to automate the execution of the fate sh script and the synchronisation of the samples directory FATE makefile targets and variables************************************* Makefile can be set to

Definition at line 142 of file fate.txt.

Referenced by toright().

FFmpeg Automated Testing Environment************************************ Table of Contents***************** FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction************** FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory********************************************** If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server**************************************************************** To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet used

Definition at line 34 of file fate.txt.

Referenced by discard_pid(), huff_build_tree(), and huff_smallest_node().

FFmpeg Automated Testing Environment************************************ Table of Contents***************** FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction************** FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this as it can be seen if some test on some platform broke with their recent contribution This usually happens on the platforms the developers could not test on The second part of this document describes how you can run FATE to submit your results to FFmpeg s FATE server If you want to submit your results be sure to check that your combination of OS and compiler is not already listed on the above mentioned website In the third part you can find a comprehensive listing of FATE makefile targets and variables Using FATE from your FFmpeg source directory********************************************** If you want to run FATE on your machine you need to have the samples in place You can get the samples via the build target fate rsync Use this command from the top level source this will cause FATE to fail NOTE To use a custom wrapper to run the pass target exec to configure or set the TARGET_EXEC Make variable Submitting the results to the FFmpeg result aggregation server**************************************************************** To submit your results to the server you should run fate through the shell script tests fate sh from the FFmpeg sources This script needs to be invoked with a configuration file as its first argument tests fate sh path to fate_config A configuration file template with comments describing the individual configuration variables can be found at doc fate_config sh template Create a configuration that suits your based on the configuration template The slot configuration variable can be any string that is not yet but it is suggested that you name it adhering to the following pattern<arch><os><compiler><compiler version> The configuration file itself will be sourced in a shell therefore all shell features may be used This enables you to setup the environment as you need it for your build For your first test runs the fate_recv variable should be empty or commented out This will run everything as normal except that it will omit the submission of the results to the server The following files should be present in $workdir as specified in the configuration it may help to try out the ssh command with one or more v options You should get detailed output concerning your SSH configuration and the authentication process The only thing left is to automate the execution of the fate sh script and the synchronisation of the samples directory FATE makefile targets and variables************************************* Makefile can be set or it has a meaning only while running the regression tests THREADS Specify how many threads to use while running regression it is quite useful to detect thread related regressions THREAD_TYPE Specify which threading strategy either SLICE or by default SLICE FRAME CPUFLAGS Specify CPU flags TARGET_EXEC Specify or override the wrapper used to run the tests The TARGET_EXEC option provides a way to run FATE wrapped in valgrind

Definition at line 142 of file fate.txt.

FFmpeg Automated Testing Environment************************************ Table of Contents***************** FFmpeg Automated Testing Environment Introduction Using FATE from your FFmpeg source directory Submitting the results to the FFmpeg result aggregation server FATE makefile targets and variables Makefile targets Makefile variables Examples Introduction************** FATE is an extended regression suite on the client side and a means for results aggregation and presentation on the server side The first part of this document explains how you can use FATE from your FFmpeg source directory to test your ffmpeg binary The second part describes how you can run FATE to submit the results to FFmpeg s FATE server In any way you can have a look at the publicly viewable FATE results by visiting this website

Definition at line 34 of file fate.txt.