SpectralBandReplication Struct Reference

Spectral Band Replication. More...

#include <sbr.h>

Collaboration diagram for SpectralBandReplication:

Public Member Functions
	DECLARE_ALIGNED (16, float, X_low)[32][40][2]
	QMF low frequency input to the HF generator. More...
	DECLARE_ALIGNED (16, float, X_high)[64][40][2]
	QMF output of the HF generator. More...
	DECLARE_ALIGNED (16, float, X)[2][2][38][64]
	QMF values of the reconstructed signal. More...
	DECLARE_ALIGNED (16, float, alpha0)[64][2]
	Zeroth coefficient used to filter the subband signals. More...
	DECLARE_ALIGNED (16, float, alpha1)[64][2]
	First coefficient used to filter the subband signals. More...
	DECLARE_ALIGNED (32, float, qmf_filter_scratch)[5][64]

Data Fields
int	sample_rate
int	start
int	reset
SpectrumParameters	spectrum_params
int	bs_amp_res_header
unsigned	bs_coupling
unsigned	k [5]
	k0, k1, k2 More...
unsigned	kx [2]
	kx', and kx respectively, kx is the first QMF subband where SBR is used. More...
unsigned	m [2]
	M' and M respectively, M is the number of QMF subbands that use SBR. More...
unsigned	kx_and_m_pushed
unsigned	n_master
	The number of frequency bands in f_master. More...
SBRData	data [2]
PSContext	ps
unsigned	n [2]
	N_Low and N_High respectively, the number of frequency bands for low and high resolution. More...
unsigned	n_q
	Number of noise floor bands. More...
unsigned	n_lim
	Number of limiter bands. More...
uint16_t	f_master [49]
	The master QMF frequency grouping. More...
uint16_t	f_tablelow [25]
	Frequency borders for low resolution SBR. More...
uint16_t	f_tablehigh [49]
	Frequency borders for high resolution SBR. More...
uint16_t	f_tablenoise [6]
	Frequency borders for noise floors. More...
uint16_t	f_tablelim [30]
	Frequency borders for the limiter. More...
unsigned	num_patches
uint8_t	patch_num_subbands [6]
uint8_t	patch_start_subband [6]
float	e_origmapped [7][48]
	Dequantized envelope scalefactors, remapped. More...
float	q_mapped [7][48]
	Dequantized noise scalefactors, remapped. More...
uint8_t	s_mapped [7][48]
	Sinusoidal presence, remapped. More...
float	e_curr [7][48]
	Estimated envelope. More...
float	q_m [7][48]
	Amplitude adjusted noise scalefactors. More...
float	s_m [7][48]
	Sinusoidal levels. More...
float	gain [7][48]
FFTContext	mdct_ana
FFTContext	mdct
SBRDSPContext	dsp
AACSBRContext	c
Variables associated with bs_header_extra_2
unsigned	bs_limiter_bands
unsigned	bs_limiter_gains
unsigned	bs_interpol_freq
unsigned	bs_smoothing_mode

Detailed Description

Spectral Band Replication.

Definition at line 137 of file sbr.h.

Member Function Documentation

SpectralBandReplication::DECLARE_ALIGNED	(	16	,
		float	,
		X_low
	)

QMF low frequency input to the HF generator.

SpectralBandReplication::DECLARE_ALIGNED	(	16	,
		float	,
		X_high
	)

QMF output of the HF generator.

SpectralBandReplication::DECLARE_ALIGNED	(	16	,
		float	,
		X
	)

QMF values of the reconstructed signal.

SpectralBandReplication::DECLARE_ALIGNED	(	16	,
		float	,
		alpha0
	)

Zeroth coefficient used to filter the subband signals.

SpectralBandReplication::DECLARE_ALIGNED	(	16	,
		float	,
		alpha1
	)

First coefficient used to filter the subband signals.

SpectralBandReplication::DECLARE_ALIGNED	(	32	,
		float	,
		qmf_filter_scratch
	)

Field Documentation

int SpectralBandReplication::bs_amp_res_header

Definition at line 142 of file sbr.h.

Referenced by read_sbr_grid(), and read_sbr_header().

unsigned SpectralBandReplication::bs_coupling

Definition at line 152 of file sbr.h.

Referenced by read_sbr_channel_pair_element(), read_sbr_envelope(), read_sbr_noise(), and sbr_dequant().

unsigned SpectralBandReplication::bs_interpol_freq

Definition at line 149 of file sbr.h.

Referenced by read_sbr_header(), and sbr_env_estimate().

unsigned SpectralBandReplication::bs_limiter_bands

Definition at line 147 of file sbr.h.

Referenced by read_sbr_header(), and sbr_make_f_tablelim().

unsigned SpectralBandReplication::bs_limiter_gains

Definition at line 148 of file sbr.h.

Referenced by read_sbr_header(), and sbr_gain_calc().

unsigned SpectralBandReplication::bs_smoothing_mode

Definition at line 150 of file sbr.h.

Referenced by read_sbr_header(), and sbr_hf_assemble().

AACSBRContext SpectralBandReplication::c

Definition at line 210 of file sbr.h.

Referenced by ff_aac_sbr_ctx_init(), and ff_sbr_apply().

SBRData SpectralBandReplication::data[2]

Definition at line 162 of file sbr.h.

Referenced by ff_aac_sbr_ctx_init(), ff_sbr_apply(), read_sbr_channel_pair_element(), read_sbr_single_channel_element(), sbr_dequant(), sbr_make_f_derived(), sbr_turnoff(), and sbr_x_gen().

SBRDSPContext SpectralBandReplication::dsp

Definition at line 209 of file sbr.h.

Referenced by ff_aac_sbr_ctx_init(), ff_sbr_apply(), sbr_env_estimate(), sbr_hf_assemble(), and sbr_hf_gen().

float SpectralBandReplication::e_curr[7][48]

Estimated envelope.

Definition at line 200 of file sbr.h.

Referenced by ff_sbr_apply(), and sbr_gain_calc().

float SpectralBandReplication::e_origmapped[7][48]

Dequantized envelope scalefactors, remapped.

Definition at line 194 of file sbr.h.

Referenced by sbr_gain_calc(), and sbr_mapping().

uint16_t SpectralBandReplication::f_master[49]

The master QMF frequency grouping.

Definition at line 171 of file sbr.h.

Referenced by sbr_hf_calc_npatches(), sbr_make_f_derived(), and sbr_make_f_master().

uint16_t SpectralBandReplication::f_tablehigh[49]

Frequency borders for high resolution SBR.

Definition at line 175 of file sbr.h.

Referenced by sbr_env_estimate(), sbr_make_f_derived(), and sbr_mapping().

uint16_t SpectralBandReplication::f_tablelim[30]

Frequency borders for the limiter.

Definition at line 179 of file sbr.h.

Referenced by sbr_gain_calc(), and sbr_make_f_tablelim().

uint16_t SpectralBandReplication::f_tablelow[25]

Frequency borders for low resolution SBR.

Definition at line 173 of file sbr.h.

Referenced by sbr_env_estimate(), sbr_make_f_derived(), sbr_make_f_tablelim(), and sbr_mapping().

uint16_t SpectralBandReplication::f_tablenoise[6]

Frequency borders for noise floors.

Definition at line 177 of file sbr.h.

Referenced by sbr_hf_gen(), sbr_make_f_derived(), and sbr_mapping().

float SpectralBandReplication::gain[7][48]

Definition at line 205 of file sbr.h.

Referenced by sbr_gain_calc(), and sbr_hf_assemble().

unsigned SpectralBandReplication::k[5]

k0, k1, k2

Definition at line 153 of file sbr.h.

Referenced by ff_sbr_apply(), sbr_hf_calc_npatches(), sbr_make_f_derived(), and sbr_make_f_master().

unsigned SpectralBandReplication::kx[2]

kx', and kx respectively, kx is the first QMF subband where SBR is used.

kx' is its value from the previous frame

Definition at line 156 of file sbr.h.

Referenced by ff_aac_sbr_ctx_init(), ff_decode_sbr_extension(), ff_sbr_apply(), sbr_env_estimate(), sbr_gain_calc(), sbr_hf_assemble(), sbr_hf_calc_npatches(), sbr_hf_gen(), sbr_lf_gen(), sbr_make_f_derived(), sbr_make_f_tablelim(), sbr_mapping(), sbr_turnoff(), and sbr_x_gen().

unsigned SpectralBandReplication::kx_and_m_pushed

Definition at line 159 of file sbr.h.

Referenced by ff_decode_sbr_extension(), and ff_sbr_apply().

unsigned SpectralBandReplication::m[2]

M' and M respectively, M is the number of QMF subbands that use SBR.

Definition at line 158 of file sbr.h.

Referenced by ff_decode_sbr_extension(), ff_sbr_apply(), sbr_env_estimate(), sbr_hf_assemble(), sbr_hf_calc_npatches(), sbr_hf_gen(), sbr_make_f_derived(), sbr_turnoff(), and sbr_x_gen().

FFTContext SpectralBandReplication::mdct

Definition at line 208 of file sbr.h.

Referenced by ff_aac_sbr_ctx_close(), ff_aac_sbr_ctx_init(), and ff_sbr_apply().

FFTContext SpectralBandReplication::mdct_ana

Definition at line 207 of file sbr.h.

Referenced by ff_aac_sbr_ctx_close(), ff_aac_sbr_ctx_init(), and ff_sbr_apply().

unsigned SpectralBandReplication::n[2]

N_Low and N_High respectively, the number of frequency bands for low and high resolution.

Definition at line 165 of file sbr.h.

Referenced by read_sbr_channel_pair_element(), read_sbr_envelope(), read_sbr_single_channel_element(), sbr_dequant(), sbr_env_estimate(), sbr_make_f_derived(), sbr_make_f_tablelim(), and sbr_mapping().

unsigned SpectralBandReplication::n_lim

Number of limiter bands.

Definition at line 169 of file sbr.h.

Referenced by sbr_gain_calc(), and sbr_make_f_tablelim().

unsigned SpectralBandReplication::n_master

The number of frequency bands in f_master.

Definition at line 161 of file sbr.h.

Referenced by sbr_hf_calc_npatches(), sbr_make_f_derived(), and sbr_make_f_master().

unsigned SpectralBandReplication::n_q

Number of noise floor bands.

Definition at line 167 of file sbr.h.

Referenced by read_sbr_invf(), read_sbr_noise(), sbr_chirp(), sbr_dequant(), sbr_make_f_derived(), and sbr_mapping().

unsigned SpectralBandReplication::num_patches

Definition at line 180 of file sbr.h.

Referenced by sbr_hf_calc_npatches(), sbr_hf_gen(), and sbr_make_f_tablelim().

uint8_t SpectralBandReplication::patch_num_subbands[6]

Definition at line 181 of file sbr.h.

Referenced by sbr_hf_calc_npatches(), sbr_hf_gen(), and sbr_make_f_tablelim().

uint8_t SpectralBandReplication::patch_start_subband[6]

Definition at line 182 of file sbr.h.

Referenced by sbr_hf_calc_npatches(), and sbr_hf_gen().

PSContext SpectralBandReplication::ps

Definition at line 163 of file sbr.h.

Referenced by ff_aac_sbr_ctx_init(), ff_sbr_apply(), and read_sbr_extension().

float SpectralBandReplication::q_m[7][48]

Amplitude adjusted noise scalefactors.

Definition at line 202 of file sbr.h.

Referenced by sbr_gain_calc(), and sbr_hf_assemble().

float SpectralBandReplication::q_mapped[7][48]

Dequantized noise scalefactors, remapped.

Definition at line 196 of file sbr.h.

Referenced by sbr_gain_calc(), and sbr_mapping().

int SpectralBandReplication::reset

Definition at line 140 of file sbr.h.

Referenced by ff_decode_sbr_extension(), read_sbr_header(), and sbr_hf_assemble().

float SpectralBandReplication::s_m[7][48]

Sinusoidal levels.

Definition at line 204 of file sbr.h.

Referenced by sbr_gain_calc(), and sbr_hf_assemble().

uint8_t SpectralBandReplication::s_mapped[7][48]

Sinusoidal presence, remapped.

Definition at line 198 of file sbr.h.

Referenced by sbr_gain_calc(), and sbr_mapping().

int SpectralBandReplication::sample_rate

Definition at line 138 of file sbr.h.

Referenced by ff_decode_sbr_extension(), ff_sbr_apply(), sbr_hf_calc_npatches(), and sbr_make_f_master().

SpectrumParameters SpectralBandReplication::spectrum_params

Definition at line 141 of file sbr.h.

Referenced by read_sbr_header(), sbr_make_f_derived(), sbr_make_f_master(), sbr_reset(), and sbr_turnoff().

int SpectralBandReplication::start

Definition at line 139 of file sbr.h.

Referenced by ff_decode_sbr_extension(), ff_sbr_apply(), read_sbr_header(), and sbr_turnoff().

---

The documentation for this struct was generated from the following file:

• sbr.h