Mercurial > hg > beaglert
changeset 78:a37f011549fc
Added dtb file that supports beaglert GPIO
| author | Giulio Moro <giuliomoro@yahoo.it> |
|---|---|
| date | Fri, 17 Jul 2015 21:37:16 +0100 |
| parents | ad130ecb2def |
| children | 90e0c7750df3 |
| files | resources/am335x-boneblack.dts |
| diffstat | 1 files changed, 1251 insertions(+), 0 deletions(-) [+] |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/resources/am335x-boneblack.dts Fri Jul 17 21:37:16 2015 +0100 @@ -0,0 +1,1251 @@ +/dts-v1/; + +/ { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "ti,am335x-bone", "ti,am33xx"; + interrupt-parent = <0x1>; + model = "TI AM335x BeagleBone"; + + chosen { + }; + + aliases { + serial0 = "/ocp/serial@44e09000"; + serial1 = "/ocp/serial@48022000"; + serial2 = "/ocp/serial@48024000"; + serial3 = "/ocp/serial@481a6000"; + serial4 = "/ocp/serial@481a8000"; + serial5 = "/ocp/serial@481aa000"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + cpus { + + cpu@0 { + compatible = "arm,cortex-a8"; + operating-points = <0xf4240 0x149970 0xc3500 0x13d620 0x927c0 0x10f7c0 0x493e0 0xec928>; + voltage-tolerance = <0x2>; + clock-latency = <0x493e0>; + cpu0-supply = <0x2>; + linux,phandle = <0x12>; + phandle = <0x12>; + }; + }; + + soc { + compatible = "ti,omap-infra"; + + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + }; + + pinmux@44e10800 { + compatible = "pinctrl-single"; + reg = <0x44e10800 0x238>; + #address-cells = <0x1>; + #size-cells = <0x0>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7f>; + pinctrl-names = "default"; + pinctrl-0 = <0x3>; + linux,phandle = <0x13>; + phandle = <0x13>; + + pinmux_userled_pins { + pinctrl-single,pins = <0x54 0x7 0x58 0x17 0x5c 0x7 0x60 0x17 +// /*PRU1 GPO 0-7*/ 0xa0 0x05 0xa4 0x05 0xa8 0x05 0xac 0x05 0xb0 0x05 0xb4 0x05 0xb8 0x05 0xbc 0x05 +/*GPIOrt pins*/ 0x90 0x27 0x94 0x27 0x9c 0x27 0x98 0x27 0x34 0x27 0x30 0x27 0x78 0x27 0x48 0x27 0x3c 0x27 0x38 0x27 0x4c 0x27 0x8c 0x27 0xe0 0x27 0xe8 0x27 0xe4 0x27 0xec 0x27 +// /*GPIOrt pins with PRU0 gpo*/ 0x90 0x27 0x94 0x27 0x9c 0x27 0x98 0x27 0x34 0x06 0x30 0x06 0x78 0x27 0x48 0x27 0x3c 0x27 0x38 0x27 0x4c 0x27 0x8c 0x27 0xe0 0x27 0xe8 0x27 0xe4 0x27 0xec 0x27 +>; + linux,phandle = <0x3>; + phandle = <0x3>; + }; + + pinmux_i2c0_pins { + pinctrl-single,pins = <0x188 0x70 0x18c 0x70>; + linux,phandle = <0x6>; + phandle = <0x6>; + }; + + pinmux_i2c1_pins { + pinctrl-single,pins = <0x180 0x73 0x184 0x73>; + linux,phandle = <0x7>; + phandle = <0x7>; + }; + + pinmux_i2c2_pins { + pinctrl-single,pins = <0x178 0x73 0x17c 0x73>; + linux,phandle = <0x8>; + phandle = <0x8>; + }; + + pinmux_rstctl_pins { + pinctrl-single,pins = <0x50 0x17>; + linux,phandle = <0x4>; + phandle = <0x4>; + }; + }; + + ocp { + compatible = "simple-bus"; + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; + ti,hwmods = "l3_main"; + linux,phandle = <0x14>; + phandle = <0x14>; + + interrupt-controller@48200000 { + compatible = "ti,omap2-intc"; + interrupt-controller; + #interrupt-cells = <0x1>; + ti,intc-size = <0x80>; + reg = <0x48200000 0x1000>; + linux,phandle = <0x1>; + phandle = <0x1>; + }; + + edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; + reg = <0x49000000 0x10000 0x44e10f90 0x40>; + interrupt-parent = <0x1>; + interrupts = <0xc 0xd 0xe>; + #dma-cells = <0x1>; + dma-channels = <0x40>; + ti,edma-regions = <0x4>; + ti,edma-slots = <0x100>; + ti,edma-queue-tc-map = <0x0 0x0 0x1 0x1 0x2 0x2>; + ti,edma-queue-priority-map = <0x0 0x0 0x1 0x1 0x2 0x2>; + ti,edma-default-queue = <0x1>; + ti,edma-xbar-event-map = <0x20 0xc 0x1e 0x14>; + linux,phandle = <0x9>; + phandle = <0x9>; + }; + + gpio@44e07000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x1>; + reg = <0x44e07000 0x1000>; + interrupts = <0x60>; + linux,phandle = <0x15>; + phandle = <0x15>; + }; + + gpio@4804c000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x1>; + reg = <0x4804c000 0x1000>; + interrupts = <0x62>; + linux,phandle = <0x5>; + phandle = <0x5>; + }; + + gpio@481ac000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x1>; + reg = <0x481ac000 0x1000>; + interrupts = <0x20>; + linux,phandle = <0x16>; + phandle = <0x16>; + }; + + gpio@481ae000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x1>; + reg = <0x481ae000 0x1000>; + interrupts = <0x3e>; + linux,phandle = <0x17>; + phandle = <0x17>; + }; + + rstctl@0 { + status = "okay"; + compatible = "gpio-rctrl"; + pinctrl-names = "default"; + pinctrl-0 = <0x4>; + #reset-cells = <0x2>; + gpios = <0x5 0x14 0x0>; + gpio-names = "eMMC_RSTn"; + linux,phandle = <0xb>; + phandle = <0xb>; + }; + + serial@44e09000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; + clock-frequency = <0x2dc6c00>; + reg = <0x44e09000 0x2000>; + interrupts = <0x48>; + status = "okay"; + linux,phandle = <0x18>; + phandle = <0x18>; + }; + + serial@48022000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; + clock-frequency = <0x2dc6c00>; + reg = <0x48022000 0x2000>; + interrupts = <0x49>; + status = "okay"; + linux,phandle = <0x19>; + phandle = <0x19>; + }; + + serial@48024000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; + clock-frequency = <0x2dc6c00>; + reg = <0x48024000 0x2000>; + interrupts = <0x4a>; + status = "disabled"; + linux,phandle = <0x1a>; + phandle = <0x1a>; + }; + + serial@481a6000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <0x2dc6c00>; + reg = <0x481a6000 0x2000>; + interrupts = <0x2c>; + status = "disabled"; + linux,phandle = <0x1b>; + phandle = <0x1b>; + }; + + serial@481a8000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart5"; + clock-frequency = <0x2dc6c00>; + reg = <0x481a8000 0x2000>; + interrupts = <0x2d>; + status = "disabled"; + linux,phandle = <0x1c>; + phandle = <0x1c>; + }; + + serial@481aa000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart6"; + clock-frequency = <0x2dc6c00>; + reg = <0x481aa000 0x2000>; + interrupts = <0x2e>; + status = "disabled"; + linux,phandle = <0x1d>; + phandle = <0x1d>; + }; + + i2c@44e0b000 { + compatible = "ti,omap4-i2c"; + #address-cells = <0x1>; + #size-cells = <0x0>; + ti,hwmods = "i2c1"; + reg = <0x44e0b000 0x1000>; + interrupts = <0x46>; + status = "okay"; + clock-frequency = <0x61a80>; + pinctrl-names = "default"; + pinctrl-0 = <0x6>; + linux,phandle = <0x1e>; + phandle = <0x1e>; + + tps@24 { + reg = <0x24>; + compatible = "ti,tps65217"; + ti,pmic-shutdown-controller; + linux,phandle = <0x1f>; + phandle = <0x1f>; + + regulators { + #address-cells = <0x1>; + #size-cells = <0x0>; + + regulator@0 { + reg = <0x0>; + regulator-compatible = "dcdc1"; + regulator-always-on; + linux,phandle = <0x20>; + phandle = <0x20>; + }; + + regulator@1 { + reg = <0x1>; + regulator-compatible = "dcdc2"; + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <0xe1d48>; + regulator-max-microvolt = <0x1437c8>; + regulator-boot-on; + regulator-always-on; + linux,phandle = <0x2>; + phandle = <0x2>; + }; + + regulator@2 { + reg = <0x2>; + regulator-compatible = "dcdc3"; + regulator-name = "vdd_core"; + regulator-min-microvolt = <0xe1d48>; + regulator-max-microvolt = <0x118c30>; + regulator-boot-on; + regulator-always-on; + linux,phandle = <0x21>; + phandle = <0x21>; + }; + + regulator@3 { + reg = <0x3>; + regulator-compatible = "ldo1"; + regulator-always-on; + linux,phandle = <0x22>; + phandle = <0x22>; + }; + + regulator@4 { + reg = <0x4>; + regulator-compatible = "ldo2"; + regulator-always-on; + linux,phandle = <0x23>; + phandle = <0x23>; + }; + + regulator@5 { + reg = <0x5>; + regulator-compatible = "ldo3"; + regulator-min-microvolt = <0x1b7740>; + regulator-max-microvolt = <0x1b7740>; + regulator-always-on; + linux,phandle = <0x24>; + phandle = <0x24>; + }; + + regulator@6 { + reg = <0x6>; + regulator-compatible = "ldo4"; + regulator-always-on; + linux,phandle = <0x25>; + phandle = <0x25>; + }; + }; + }; + + baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + linux,phandle = <0xd>; + phandle = <0xd>; + }; + }; + + i2c@4802a000 { + compatible = "ti,omap4-i2c"; + #address-cells = <0x1>; + #size-cells = <0x0>; + ti,hwmods = "i2c2"; + reg = <0x4802a000 0x1000>; + interrupts = <0x47>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <0x7>; + clock-frequency = <0x61a80>; + linux,phandle = <0x26>; + phandle = <0x26>; + }; + + i2c@4819c000 { + compatible = "ti,omap4-i2c"; + #address-cells = <0x1>; + #size-cells = <0x0>; + ti,hwmods = "i2c3"; + reg = <0x4819c000 0x1000>; + interrupts = <0x1e>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <0x8>; + clock-frequency = <0x186a0>; + linux,phandle = <0x27>; + phandle = <0x27>; + + cape_eeprom0@54 { + compatible = "at,24c256"; + reg = <0x54>; + linux,phandle = <0xe>; + phandle = <0xe>; + }; + + cape_eeprom1@55 { + compatible = "at,24c256"; + reg = <0x55>; + linux,phandle = <0xf>; + phandle = <0xf>; + }; + + cape_eeprom2@56 { + compatible = "at,24c256"; + reg = <0x56>; + linux,phandle = <0x10>; + phandle = <0x10>; + }; + + cape_eeprom3@57 { + compatible = "at,24c256"; + reg = <0x57>; + linux,phandle = <0x11>; + phandle = <0x11>; + }; + }; + + mmc@48060000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + ti,needs-special-hs-handling; + dmas = <0x9 0x18 0x9 0x19>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <0xa>; + ti,vcc-aux-disable-is-sleep; + linux,phandle = <0x28>; + phandle = <0x28>; + }; + + mmc@481d8000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + ti,needs-special-hs-handling; + dmas = <0x9 0x2 0x9 0x3>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <0xa>; + bus-width = <0x8>; + ti,non-removable; + reset = <0xb 0x0 0x0>; + reset-names = "eMMC_RSTn-CONSUMER"; + linux,phandle = <0x29>; + phandle = <0x29>; + }; + + mmc@47810000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + ti,needs-special-hs-handling; + status = "disabled"; + linux,phandle = <0x2a>; + phandle = <0x2a>; + }; + + wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x44e35000 0x1000>; + interrupts = <0x5b>; + linux,phandle = <0x2b>; + phandle = <0x2b>; + }; + + d_can@481cc000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can0"; + reg = <0x481cc000 0x2000>; + interrupts = <0x34>; + status = "disabled"; + linux,phandle = <0x2c>; + phandle = <0x2c>; + }; + + d_can@481d0000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can1"; + reg = <0x481d0000 0x2000>; + interrupts = <0x37>; + status = "disabled"; + linux,phandle = <0x2d>; + phandle = <0x2d>; + }; + + timer@44e31000 { + compatible = "ti,omap2-timer"; + reg = <0x44e31000 0x400>; + interrupts = <0x43>; + ti,hwmods = "timer1"; + ti,timer-alwon; + linux,phandle = <0x2e>; + phandle = <0x2e>; + }; + + timer@48040000 { + compatible = "ti,omap2-timer"; + reg = <0x48040000 0x400>; + interrupts = <0x44>; + ti,hwmods = "timer2"; + linux,phandle = <0x2f>; + phandle = <0x2f>; + }; + + timer@48042000 { + compatible = "ti,omap2-timer"; + reg = <0x48042000 0x400>; + interrupts = <0x45>; + ti,hwmods = "timer3"; + linux,phandle = <0x30>; + phandle = <0x30>; + }; + + timer@48044000 { + compatible = "ti,omap2-timer"; + reg = <0x48044000 0x400>; + interrupts = <0x5c>; + ti,hwmods = "timer4"; + ti,timer-pwm; + linux,phandle = <0x31>; + phandle = <0x31>; + }; + + timer@48046000 { + compatible = "ti,omap2-timer"; + reg = <0x48046000 0x400>; + interrupts = <0x5d>; + ti,hwmods = "timer5"; + ti,timer-pwm; + linux,phandle = <0x32>; + phandle = <0x32>; + }; + + timer@48048000 { + compatible = "ti,omap2-timer"; + reg = <0x48048000 0x400>; + interrupts = <0x5e>; + ti,hwmods = "timer6"; + ti,timer-pwm; + linux,phandle = <0x33>; + phandle = <0x33>; + }; + + timer@4804a000 { + compatible = "ti,omap2-timer"; + reg = <0x4804a000 0x400>; + interrupts = <0x5f>; + ti,hwmods = "timer7"; + ti,timer-pwm; + linux,phandle = <0x34>; + phandle = <0x34>; + }; + + pruss@4a300000 { + compatible = "ti,pruss-v2"; + ti,hwmods = "pruss"; + ti,deassert-hard-reset = "pruss", "pruss"; + reg = <0x4a300000 0x80000>; + ti,pintc-offset = <0x20000>; + interrupt-parent = <0x1>; + status = "disabled"; + interrupts = <0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1b>; + linux,phandle = <0x35>; + phandle = <0x35>; + }; + + rtc@44e3e000 { + compatible = "ti,da830-rtc"; + reg = <0x44e3e000 0x1000>; + interrupts = <0x4b 0x4c>; + ti,hwmods = "rtc"; + ti,system-power-controller; + }; + + spi@48030000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0x48030000 0x400>; + interrupt = <0x41>; + ti,spi-num-cs = <0x2>; + ti,hwmods = "spi0"; + dmas = <0x9 0x10 0x9 0x11 0x9 0x12 0x9 0x13>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + linux,phandle = <0x36>; + phandle = <0x36>; + }; + + spi@481a0000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0x481a0000 0x400>; + interrupt = <0x7d>; + ti,spi-num-cs = <0x2>; + ti,hwmods = "spi1"; + dmas = <0x9 0x2a 0x9 0x2b 0x9 0x2c 0x9 0x2d>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + linux,phandle = <0x37>; + phandle = <0x37>; + }; + + gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x50000000 0x1000000>; + interrupts = <0x64>; + gpmc,num-cs = <0x7>; + gpmc,num-waitpins = <0x2>; + #address-cells = <0x2>; + #size-cells = <0x1>; + status = "disabled"; + linux,phandle = <0x38>; + phandle = <0x38>; + }; + + nop-phy@0 { + compatible = "nop-xceiv-usb"; + }; + + nop-phy@1 { + compatible = "nop-xceiv-usb"; + }; + + usb@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 0x47401000 0x800 0x47401800 0x800>; + interrupts = <0x11 0x12 0x13>; + multipoint = <0x1>; + num-eps = <0x10>; + ram-bits = <0xc>; + port0-mode = <0x3>; + port1-mode = <0x1>; + power = <0xfa>; + ti,hwmods = "usb_otg_hs"; + status = "okay"; + interface_type = <0x1>; + linux,phandle = <0x39>; + phandle = <0x39>; + }; + + ethernet@4a100000 { + compatible = "ti,cpsw"; + ti,hwmods = "cpgmac0"; + cpdma_channels = <0x8>; + ale_entries = <0x400>; + bd_ram_size = <0x2000>; + no_bd_ram = <0x0>; + rx_descs = <0x40>; + mac_control = <0x20>; + slaves = <0x2>; + cpts_active_slave = <0x0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <0x1d>; + reg = <0x4a100000 0x800 0x4a101200 0x100>; + #address-cells = <0x1>; + #size-cells = <0x1>; + interrupt-parent = <0x1>; + interrupts = <0x28 0x29 0x2a 0x2b>; + ranges; + disable-napi; + linux,phandle = <0x3a>; + phandle = <0x3a>; + + mdio@4a101000 { + compatible = "ti,davinci_mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <0xf4240>; + reg = <0x4a101000 0x100>; + linux,phandle = <0xc>; + phandle = <0xc>; + }; + + slave@4a100200 { + mac-address = [00 00 00 00 00 00]; + phy_id = <0xc 0x0>; + linux,phandle = <0x3b>; + phandle = <0x3b>; + }; + + slave@4a100300 { + mac-address = [00 00 00 00 00 00]; + phy_id = <0xc 0x1>; + linux,phandle = <0x3c>; + phandle = <0x3c>; + }; + }; + + tscadc@44e0d000 { + compatible = "ti,ti-tscadc"; + reg = <0x44e0d000 0x1000>; + interrupt-parent = <0x1>; + interrupts = <0x10>; + ti,hwmods = "adc_tsc"; + status = "disabled"; + linux,phandle = <0x3d>; + phandle = <0x3d>; + }; + + lcdc@4830e000 { + compatible = "ti,am3352-lcdc", "ti,da830-lcdc"; + reg = <0x4830e000 0x1000>; + interrupts = <0x24>; + status = "disabled"; + ti,hwmods = "lcdc"; + linux,phandle = <0x3e>; + phandle = <0x3e>; + }; + + epwmss@48300000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48300000 0x10>; + ti,hwmods = "epwmss0"; + #address-cells = <0x1>; + #size-cells = <0x1>; + status = "disabled"; + ranges = <0x48300100 0x48300100 0x80 0x48300180 0x48300180 0x80 0x48300200 0x48300200 0x80>; + linux,phandle = <0x3f>; + phandle = <0x3f>; + + ecap@48300100 { + compatible = "ti,am33xx-ecap"; + #pwm-cells = <0x3>; + reg = <0x48300100 0x80>; + ti,hwmods = "ecap0"; + status = "disabled"; + linux,phandle = <0x40>; + phandle = <0x40>; + }; + + ehrpwm@48300200 { + compatible = "ti,am33xx-ehrpwm"; + #pwm-cells = <0x3>; + reg = <0x48300200 0x80>; + ti,hwmods = "ehrpwm0"; + status = "disabled"; + linux,phandle = <0x41>; + phandle = <0x41>; + }; + }; + + epwmss@48302000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48302000 0x10>; + ti,hwmods = "epwmss1"; + #address-cells = <0x1>; + #size-cells = <0x1>; + status = "disabled"; + ranges = <0x48302100 0x48302100 0x80 0x48302180 0x48302180 0x80 0x48302200 0x48302200 0x80>; + linux,phandle = <0x42>; + phandle = <0x42>; + + ecap@48302100 { + compatible = "ti,am33xx-ecap"; + #pwm-cells = <0x3>; + reg = <0x48302100 0x80>; + ti,hwmods = "ecap1"; + status = "disabled"; + linux,phandle = <0x43>; + phandle = <0x43>; + }; + + ehrpwm@48302200 { + compatible = "ti,am33xx-ehrpwm"; + #pwm-cells = <0x3>; + reg = <0x48302200 0x80>; + ti,hwmods = "ehrpwm1"; + status = "disabled"; + linux,phandle = <0x44>; + phandle = <0x44>; + }; + }; + + epwmss@48304000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48304000 0x10>; + ti,hwmods = "epwmss2"; + #address-cells = <0x1>; + #size-cells = <0x1>; + status = "disabled"; + ranges = <0x48304100 0x48304100 0x80 0x48304180 0x48304180 0x80 0x48304200 0x48304200 0x80>; + linux,phandle = <0x45>; + phandle = <0x45>; + + ecap@48304100 { + compatible = "ti,am33xx-ecap"; + #pwm-cells = <0x3>; + reg = <0x48304100 0x80>; + ti,hwmods = "ecap2"; + status = "disabled"; + linux,phandle = <0x46>; + phandle = <0x46>; + }; + + ehrpwm@48304200 { + compatible = "ti,am33xx-ehrpwm"; + #pwm-cells = <0x3>; + reg = <0x48304200 0x80>; + ti,hwmods = "ehrpwm2"; + status = "disabled"; + linux,phandle = <0x47>; + phandle = <0x47>; + }; + }; + + sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0x53100000 0x200>; + interrupt-parent = <0x1>; + interrupts = <0x6d>; + dmas = <0x9 0x24>; + dma-names = "rx"; + status = "okay"; + linux,phandle = <0x48>; + phandle = <0x48>; + }; + + aes@53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0x53500000 0xa0>; + interrupt-parent = <0x1>; + interrupts = <0x66>; + dmas = <0x9 0x6 0x9 0x5>; + dma-names = "tx", "rx"; + status = "okay"; + linux,phandle = <0x49>; + phandle = <0x49>; + }; + + mcasp@48038000 { + compatible = "ti,omap2-mcasp-audio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + ti,hwmods = "mcasp0"; + reg = <0x48038000 0x2000>; + interrupts = <0x50 0x51>; + status = "disabled"; + asp-chan-q = <0x2>; + tx-dma-offset = <0x46000000>; + rx-dma-offset = <0x46000000>; + dmas = <0x9 0x8 0x9 0x9>; + dma-names = "tx", "rx"; + linux,phandle = <0x4a>; + phandle = <0x4a>; + }; + + mcasp@4803C000 { + compatible = "ti,omap2-mcasp-audio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + ti,hwmods = "mcasp1"; + reg = <0x4803c000 0x2000>; + interrupts = <0x52 0x53>; + status = "disabled"; + asp-chan-q = <0x2>; + tx-dma-offset = <0x46400000>; + rx-dma-offset = <0x46400000>; + dmas = <0x9 0xa 0x9 0xb>; + dma-names = "tx", "rx"; + linux,phandle = <0x4b>; + phandle = <0x4b>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <0x3>; + + led0 { + label = "beaglebone:green:usr0"; + gpios = <0x5 0x15 0x0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led1 { + label = "beaglebone:green:usr1"; + gpios = <0x5 0x16 0x0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led2 { + label = "beaglebone:green:usr2"; + gpios = <0x5 0x17 0x0>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led3 { + label = "beaglebone:green:usr3"; + gpios = <0x5 0x18 0x0>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; + }; + + bone_capemgr { + compatible = "ti,bone-capemgr"; + status = "okay"; + eeprom = <0xd>; + + baseboardmaps { + + board@0 { + board-name = "A335BONE"; + compatible-name = "ti,beaglebone"; + linux,phandle = <0x4c>; + phandle = <0x4c>; + }; + + board@1 { + board-name = "A335BNLT"; + compatible-name = "ti,beaglebone-black"; + linux,phandle = <0x4d>; + phandle = <0x4d>; + }; + }; + + slots { + + slot@0 { + eeprom = <0xe>; + }; + + slot@1 { + eeprom = <0xf>; + }; + + slot@2 { + eeprom = <0x10>; + }; + + slot@3 { + eeprom = <0x11>; + }; + + slot@5 { + ti,cape-override; + compatible = "kernel-command-line", "runtime"; + board-name = "Bone-Geiger"; + version = "00A0"; + manufacturer = "Geiger Inc."; + part-number = "BB-BONE-GEIGER"; + }; + + slot@7 { + ti,cape-override; + compatible = "kernel-command-line", "runtime"; + board-name = "Bone-Nixie"; + version = "00A0"; + manufacturer = "Ranostay Industries"; + part-number = "BB-BONE-NIXIE"; + }; + + slot@8 { + ti,cape-override; + compatible = "kernel-command-line", "runtime"; + board-name = "Bone-TFT"; + version = "00A0"; + manufacturer = "Adafruit"; + part-number = "BB-BONE-TFT-01"; + }; + + slot@9 { + ti,cape-override; + compatible = "kernel-command-line", "runtime"; + board-name = "Bone-RTC"; + version = "00A0"; + manufacturer = "Adafruit"; + part-number = "BB-BONE-RTC-01"; + }; + + slot@10 { + ti,cape-override; + compatible = "kernel-command-line", "runtime"; + board-name = "Bone-Hexy"; + version = "00A0"; + manufacturer = "Koen Kooi"; + part-number = "BB-BONE-HEXY-01"; + }; + + slot@11 { + ti,cape-override; + compatible = "kernel-command-line", "runtime"; + board-name = "Bone-MRF24J40"; + version = "00A0"; + manufacturer = "Signal 11 Software"; + part-number = "BB-BONE-MRF24J40"; + }; + + slot@100 { + ti,cape-override; + priority = <0x1>; + compatible = "ti,beaglebone-black"; + board-name = "Bone-LT-eMMC-2G"; + version = "00A0"; + manufacturer = "Texas Instruments"; + part-number = "BB-BONE-EMMC-2G"; + }; + + slot@101 { + ti,cape-override; + priority = <0x1>; + compatible = "ti,beaglebone-black"; + board-name = "Bone-Black-HDMI"; + version = "00A0"; + manufacturer = "Texas Instruments"; + part-number = "BB-BONELT-HDMI"; + }; + }; + + capemaps { + + cape@0 { + part-number = "BB-BONE-DVID-01"; + + version@00A0 { + version = "00A0"; + dtbo = "cape-bone-dvi-00A0.dtbo"; + }; + + version@00A1 { + version = "00A1", "01"; + dtbo = "cape-bone-dvi-00A1.dtbo"; + }; + + version@00A2 { + version = "00A2", "A2"; + dtbo = "cape-bone-dvi-00A2.dtbo"; + }; + + version@00A3 { + version = "00A3"; + dtbo = "cape-bone-dvi-00A2.dtbo"; + }; + }; + + cape@1 { + part-number = "BB-BONE-EMMC-2G"; + + version@00A0 { + version = "00A0"; + dtbo = "cape-bone-2g-emmc1.dtbo"; + }; + }; + + cape@2 { + part-number = "BB-BONE-GEIGER"; + + version@00A0 { + version = "00A0"; + dtbo = "cape-bone-geiger-00A0.dtbo"; + }; + }; + + cape@3 { + part-number = "BB-BONE-LCD3-01"; + + version@00A0 { + version = "00A0"; + dtbo = "cape-bone-lcd3-00A0.dtbo"; + }; + + version@00A2 { + version = "00A2"; + dtbo = "cape-bone-lcd3-00A2.dtbo"; + }; + }; + + cape@4 { + part-number = "BB-BONE-WTHR-01"; + + version@00A0 { + version = "00A0"; + dtbo = "cape-bone-weather-00A0.dtbo"; + }; + }; + + cape@5 { + part-number = "BB-BONELT-HDMI"; + + version@00A0 { + version = "00A0"; + dtbo = "cape-boneblack-hdmi-00A0.dtbo"; + }; + }; + + cape@6 { + part-number = "BB-BONE-NIXIE"; + + version@00A0 { + version = "00A0"; + dtbo = "cape-bone-nixie-00A0.dtbo"; + }; + }; + + cape@7 { + part-number = "BB-BONE-TFT-01"; + + version@00A0 { + version = "00A0"; + dtbo = "cape-bone-adafruit-lcd-00A0.dtbo"; + }; + }; + + cape@8 { + part-number = "BB-BONE-RTC-01"; + + version@00A0 { + version = "00A0"; + dtbo = "cape-bone-adafruit-rtc-00A0.dtbo"; + }; + }; + + cape@9 { + part-number = "BB-BONE-HEXY-01"; + + version@00A0 { + version = "00A0"; + dtbo = "cape-bone-hexy-00A0.dtbo"; + }; + }; + + cape@10 { + part-number = "BB-BONE-MRF24J40"; + + version@00A0 { + version = "00A0"; + dtbo = "cape-bone-mrf24j40-00A0.dtbo"; + }; + }; + + cape@11 { + part-number = "BB-BONE-EXPTEST"; + + version@00A0 { + version = "00A0"; + dtbo = "cape-bone-exptest-00A0.dtbo"; + }; + }; + }; + }; + + fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <0x325aa0>; + regulator-max-microvolt = <0x325aa0>; + linux,phandle = <0xa>; + phandle = <0xa>; + }; + + __symbols__ { + cpu = "/cpus/cpu@0"; + am33xx_pinmux = "/pinmux@44e10800"; + userled_pins = "/pinmux@44e10800/pinmux_userled_pins"; + i2c0_pins = "/pinmux@44e10800/pinmux_i2c0_pins"; + i2c1_pins = "/pinmux@44e10800/pinmux_i2c1_pins"; + i2c2_pins = "/pinmux@44e10800/pinmux_i2c2_pins"; + rstctl_pins = "/pinmux@44e10800/pinmux_rstctl_pins"; + ocp = "/ocp"; + intc = "/ocp/interrupt-controller@48200000"; + edma = "/ocp/edma@49000000"; + gpio1 = "/ocp/gpio@44e07000"; + gpio2 = "/ocp/gpio@4804c000"; + gpio3 = "/ocp/gpio@481ac000"; + gpio4 = "/ocp/gpio@481ae000"; + rstctl = "/ocp/rstctl@0"; + uart1 = "/ocp/serial@44e09000"; + uart2 = "/ocp/serial@48022000"; + uart3 = "/ocp/serial@48024000"; + uart4 = "/ocp/serial@481a6000"; + uart5 = "/ocp/serial@481a8000"; + uart6 = "/ocp/serial@481aa000"; + i2c0 = "/ocp/i2c@44e0b000"; + tps = "/ocp/i2c@44e0b000/tps@24"; + dcdc1_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@0"; + dcdc2_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@1"; + dcdc3_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@2"; + ldo1_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@3"; + ldo2_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@4"; + ldo3_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@5"; + ldo4_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@6"; + baseboard_eeprom = "/ocp/i2c@44e0b000/baseboard_eeprom@50"; + i2c1 = "/ocp/i2c@4802a000"; + i2c2 = "/ocp/i2c@4819c000"; + cape_eeprom0 = "/ocp/i2c@4819c000/cape_eeprom0@54"; + cape_eeprom1 = "/ocp/i2c@4819c000/cape_eeprom1@55"; + cape_eeprom2 = "/ocp/i2c@4819c000/cape_eeprom2@56"; + cape_eeprom3 = "/ocp/i2c@4819c000/cape_eeprom3@57"; + mmc1 = "/ocp/mmc@48060000"; + mmc2 = "/ocp/mmc@481d8000"; + mmc3 = "/ocp/mmc@47810000"; + wdt2 = "/ocp/wdt@44e35000"; + dcan0 = "/ocp/d_can@481cc000"; + dcan1 = "/ocp/d_can@481d0000"; + timer1 = "/ocp/timer@44e31000"; + timer2 = "/ocp/timer@48040000"; + timer3 = "/ocp/timer@48042000"; + timer4 = "/ocp/timer@48044000"; + timer5 = "/ocp/timer@48046000"; + timer6 = "/ocp/timer@48048000"; + timer7 = "/ocp/timer@4804a000"; + pruss = "/ocp/pruss@4a300000"; + spi0 = "/ocp/spi@48030000"; + spi1 = "/ocp/spi@481a0000"; + gpmc = "/ocp/gpmc@50000000"; + usb_otg_hs = "/ocp/usb@47400000"; + mac = "/ocp/ethernet@4a100000"; + davinci_mdio = "/ocp/ethernet@4a100000/mdio@4a101000"; + cpsw_emac0 = "/ocp/ethernet@4a100000/slave@4a100200"; + cpsw_emac1 = "/ocp/ethernet@4a100000/slave@4a100300"; + tscadc = "/ocp/tscadc@44e0d000"; + lcdc = "/ocp/lcdc@4830e000"; + epwmss0 = "/ocp/epwmss@48300000"; + ecap0 = "/ocp/epwmss@48300000/ecap@48300100"; + ehrpwm0 = "/ocp/epwmss@48300000/ehrpwm@48300200"; + epwmss1 = "/ocp/epwmss@48302000"; + ecap1 = "/ocp/epwmss@48302000/ecap@48302100"; + ehrpwm1 = "/ocp/epwmss@48302000/ehrpwm@48302200"; + epwmss2 = "/ocp/epwmss@48304000"; + ecap2 = "/ocp/epwmss@48304000/ecap@48304100"; + ehrpwm2 = "/ocp/epwmss@48304000/ehrpwm@48304200"; + sham = "/ocp/sham@53100000"; + aes = "/ocp/aes@53500000"; + mcasp0 = "/ocp/mcasp@48038000"; + mcasp1 = "/ocp/mcasp@4803C000"; + baseboard_beaglebone = "/bone_capemgr/baseboardmaps/board@0"; + baseboard_beaglebone_black = "/bone_capemgr/baseboardmaps/board@1"; + vmmcsd_fixed = "/fixedregulator@0"; + }; +};