Wed, 16 Mar 2016 15:52:48 +0000 |
Rod Selfridge |
Corr length set to 7 in both normal and LoFi models
|
Wed, 16 Mar 2016 14:53:28 +0000 |
Rod Selfridge |
Minor edits but added doppler effect on the sword model.
|
Tue, 15 Mar 2016 10:44:20 +0000 |
Rod Selfridge |
Golf club added to sword model
|
Mon, 14 Mar 2016 13:20:03 +0000 |
Rod Selfridge |
Presets added for 2 swords and a BBB in SwordCorInterp model
|
Mon, 14 Mar 2016 11:46:25 +0000 |
Rod Selfridge |
Adjusted the gain value on the noise source. Reduced as became overpowering. NEED TO GET AN EXACT RATIO / VALUE TO PUT IN HERE.
|
Sun, 13 Mar 2016 20:53:12 +0000 |
Rod Selfridge |
Shallow Cavity added
|
Sat, 12 Mar 2016 20:34:27 +0000 |
Rod Selfridge |
Adjacent frequency calculated as wellas the correspoding value in lower frequency(f2).
|
Fri, 11 Mar 2016 20:51:21 +0000 |
Rod Selfridge |
Projection matrix now calculated using control signals rather than audio. This makes sense as it was eating too much processing power for something that doesn't chage during the sound effect.
|
Fri, 11 Mar 2016 15:02:22 +0000 |
Rod Selfridge |
Minor edits
|
Fri, 11 Mar 2016 12:54:45 +0000 |
Rod Selfridge |
MechAeolian added to design additions relating to vibration of the aeolian model
|
Tue, 01 Mar 2016 11:03:49 +0000 |
Rod Selfridge |
sword - LoFi D2 with wii added to test stuff out
|
Tue, 01 Mar 2016 07:22:07 +0000 |
Rod Selfridge |
Sword - Wii controls added to LoFi and log interp models. Yet to make 100%
|
Thu, 25 Feb 2016 14:19:56 +0000 |
Rod Selfridge |
SwordLogInterp and SwordCorInterp added
|
Thu, 25 Feb 2016 11:04:31 +0000 |
Rod Selfridge |
Minor adjustments
|
Wed, 24 Feb 2016 06:38:21 +0000 |
Rod Selfridge |
Sword - LoFi model added which sets St at 0.2, correlation length at 5, log placement of sources, removes wake noise
|
Tue, 23 Feb 2016 07:12:52 +0000 |
Rod Selfridge |
Sword - Pan control added
|
Mon, 22 Feb 2016 17:06:37 +0000 |
Rod Selfridge |
Sword - folder of files to Will
|
Mon, 22 Feb 2016 13:52:03 +0000 |
Rod Selfridge |
New source created for the sword model that interpolates details from the tip
|
Mon, 22 Feb 2016 06:38:53 +0000 |
Rod Selfridge |
Draft2Aeolian created and to be sent to Will
|
Mon, 22 Feb 2016 06:22:54 +0000 |
Rod Selfridge |
New Sword demo started - Looking to work from tip values and extrapolate as much data as possible for N sources.
|
Sun, 21 Feb 2016 09:26:51 +0000 |
Rod Selfridge |
Minor edits. Consider finished and supply an edited copy to Will
|
Thu, 18 Feb 2016 09:05:56 +0000 |
Rod Selfridge |
Scale factor added to gains to try and bring in line with CFD results
|
Thu, 18 Feb 2016 07:58:45 +0000 |
Rod Selfridge |
Single model of Andy's added with my wind speed generator. Can be used as a good comparitor to model designed.
|
Thu, 18 Feb 2016 07:51:01 +0000 |
Rod Selfridge |
TestBedD4 - Critical Reynolds number Q calculation bypassed as believe there is not enough data to accurately replicate this. Also only for reynolds numbers > 140000 and it is rare to be operating in this region.
|
Wed, 17 Feb 2016 18:43:53 +0000 |
Rod Selfridge |
SceneD1 model tested
|
Wed, 17 Feb 2016 16:40:48 +0000 |
Rod Selfridge |
TestBed4 - VCFs doubled up on all dipoles and single osc at a magniture of 0.01 compared to the vcf signals.
|
Wed, 17 Feb 2016 10:39:19 +0000 |
Rod Selfridge |
Sword - Minor adjustments
|
Sun, 14 Feb 2016 12:27:55 +0000 |
Rod Selfridge |
Sword - Length of arc fixed for all positions. Presets added. ISSUE _ Can not swing from left to right, only right to left.....
|
Sat, 13 Feb 2016 16:51:08 +0000 |
Rod Selfridge |
Sword, increased to 24 sources but CPU peaking. Reduced to 12 sources and CPU at 75%.
|
Sat, 13 Feb 2016 15:48:33 +0000 |
Rod Selfridge |
Sword - Source speed almost sorted - needs checked.
|
Thu, 11 Feb 2016 13:16:32 +0000 |
Rod Selfridge |
Sword model - Calculated bases for the plane of the sword, the projection matrix and the position of the observer projected onto this plane. Then can calculate the elevation and the azimuth between source and observer.
|
Wed, 10 Feb 2016 13:24:11 +0000 |
Rod Selfridge |
New TU Calculation patch added
|
Sat, 06 Feb 2016 16:54:24 +0000 |
Rod Selfridge |
Scene demo created from previous Gen3. Nw source input and wires implemented. Elevation and Azimuth to complete. Then add posts.
|
Fri, 05 Feb 2016 20:13:05 +0000 |
Rod Selfridge |
sword model updated to latest source model and evaluating. Seems averaging takes too long to give and output gain.
|
Fri, 05 Feb 2016 18:56:57 +0000 |
Rod Selfridge |
test patches removed
|
Fri, 05 Feb 2016 18:51:00 +0000 |
Rod Selfridge |
Wind - TI Model just doesn't seem to add much according to Norberg 1989. Removed.
|
Fri, 05 Feb 2016 14:29:47 +0000 |
Rod Selfridge |
Adjustment to TI on VD Q Values
|
Fri, 05 Feb 2016 13:48:13 +0000 |
Rod Selfridge |
wind - TI Calculation created, wind speed and proportionality value adjusted to give smaller variation and value set is approx the average.
|
Thu, 04 Feb 2016 19:44:55 +0000 |
Rod Selfridge |
audio control added
|
Thu, 04 Feb 2016 15:48:58 +0000 |
Rod Selfridge |
Sword - Trying to resove zipper sound when swinging. No joy yet but distance now an audio signal
|
Wed, 03 Feb 2016 15:36:20 +0000 |
Rod Selfridge |
Sword, circumference of arc added
|
Tue, 02 Feb 2016 10:56:55 +0000 |
Rod Selfridge |
Start of sword with presets
|
Fri, 29 Jan 2016 21:14:12 +0000 |
Rod Selfridge |
speed and distance calculations (Sword)
|
Thu, 28 Jan 2016 21:13:15 +0000 |
Rod Selfridge |
distance calculations started (Sword)
|
Wed, 27 Jan 2016 19:22:34 +0000 |
Rod Selfridge |
Speed calculations progressing (Sword)
|
Wed, 27 Jan 2016 15:56:50 +0000 |
Rod Selfridge |
angles calculated from mouse movements
|
Wed, 27 Jan 2016 13:53:07 +0000 |
Rod Selfridge |
Development of sword model
|
Tue, 26 Jan 2016 18:40:48 +0000 |
Rod Selfridge |
Start of newSword
|
Tue, 26 Jan 2016 18:24:01 +0000 |
Rod Selfridge |
Studying different average calculations
|
Tue, 19 Jan 2016 09:31:07 +0000 |
Rod Selfridge |
Average~ object used to calculate the average windspeed.
|
Mon, 18 Jan 2016 19:32:22 +0000 |
Rod Selfridge |
testbed2 added.
|
Mon, 18 Jan 2016 14:38:06 +0000 |
Rod Selfridge |
Averaging Acoustic Intensity calculation
|
Tue, 12 Jan 2016 10:56:14 +0000 |
Rod Selfridge |
Looking at obtaining instantaneuous wind speed to implement instantaneous intensity eqn.
|
Thu, 07 Jan 2016 17:12:06 +0000 |
Rod Selfridge |
removed q vals calculation as unused
|
Thu, 07 Jan 2016 15:46:36 +0000 |
Rod Selfridge |
Test tone patches added and small edits to originals
|
Mon, 04 Jan 2016 20:11:00 +0000 |
Rod Selfridge |
minor edits
|
Sun, 13 Dec 2015 10:17:40 +0000 |
Rod Selfridge |
More randomisation of wind generation
|
Thu, 10 Dec 2015 15:42:09 +0000 |
Rod Selfridge |
minor edits
|
Tue, 08 Dec 2015 13:49:43 +0000 |
Rod Selfridge |
WindGenD1 added that provides a better scalled wind generation.
|
Fri, 04 Dec 2015 12:07:08 +0000 |
Rod Selfridge |
Correct implementation of the Goldstein Intensity equations. Possibly needs to be scaled for raw sound level. Still with auto elevation
|