| Tue, 18 Aug 2020 16:39:26 +0100 |
Chris Cannam |
Fix some erroneous uses of reference frame where we intended "above"-view frame
default tip
|
| Tue, 18 Aug 2020 14:49:36 +0100 |
Chris Cannam |
Fix wrongly-written test which made the mapping alignments line up wrongly in some cases where adjacent panes were related (but, because of this test, the alignment view thought they were not)
|
| Fri, 14 Aug 2020 10:46:11 +0100 |
Chris Cannam |
Remove line of debug
|
| Tue, 21 Jul 2020 14:02:12 +0100 |
Chris Cannam |
Merge
|
| Tue, 21 Jul 2020 14:01:58 +0100 |
Chris Cannam |
This function is now C-linkage (with pointers) for simplicity after we pulled it optionally out into a separate DLL
|
| Thu, 02 Jul 2020 15:37:43 +0100 |
Chris Cannam |
Where the "below" view represents only a subset of the "above" view, cut off the feature mappings at the outer edges of the "below" view - don't map everything outside this (it would all just map onto the same single points at beginning and end, which is excessive, confusing and not useful)
|
| Tue, 30 Jun 2020 10:56:56 +0100 |
Chris Cannam |
Fix potential divide-by-zero (depending on a race elsewhere)
|
| Thu, 18 Jun 2020 13:45:11 +0100 |
Chris Cannam |
Merge from branch csv-import-headers
|
| Thu, 18 Jun 2020 11:52:29 +0100 |
Chris Cannam |
Support column headers, with user toggle; also distinguish visibly between tab and general whitespace delimiters
csv-import-headers
|
| Tue, 16 Jun 2020 15:16:50 +0100 |
Chris Cannam |
Fix some Qt deprecations
|
| Thu, 14 May 2020 16:38:09 +0100 |
Chris Cannam |
Profiling point
|
| Thu, 14 May 2020 16:38:05 +0100 |
Chris Cannam |
It turns out icons are loaded repeatedly when recreating menus, causing an actually appreciable slowdown when some cases. Provide a cache
|
| Mon, 11 May 2020 17:28:12 +0100 |
Chris Cannam |
Make ImageLayer able to report whether an image format can be opened
|
| Wed, 06 May 2020 11:44:38 +0100 |
Chris Cannam |
Reduce font size when pane is very thin
|
| Wed, 06 May 2020 09:08:37 +0100 |
Chris Cannam |
Reduce heights of alignment views if (they are visible and) we are squashed for space
|
| Thu, 30 Apr 2020 14:47:13 +0100 |
Chris Cannam |
When asked to render the whole view width, we need to wait for the layers to be ready before we can determine what the width is
|
| Wed, 29 Apr 2020 17:47:55 +0100 |
Chris Cannam |
Fix compiler warning
|
| Wed, 29 Apr 2020 17:47:37 +0100 |
Chris Cannam |
Debug
|
| Wed, 29 Apr 2020 14:46:37 +0100 |
Chris Cannam |
Further removal of Qt 5.6+-only APIs
|
| Wed, 29 Apr 2020 14:23:51 +0100 |
Chris Cannam |
This addAction API from Qt 5.6+ is still, unfortunately, too recent for some of our builds
|
| Wed, 29 Apr 2020 13:26:23 +0100 |
Chris Cannam |
Complete round-trip name-type conversion for melodic range & peak freq spectrograms (also has the effect of making them creatable from OSC)
|
| Wed, 22 Apr 2020 13:08:12 +0100 |
Chris Cannam |
Add list of packs, fix download test logic
|
| Mon, 20 Apr 2020 18:46:49 +0100 |
Chris Cannam |
Use Provider structure
|
| Thu, 09 Apr 2020 17:09:11 +0100 |
Chris Cannam |
Fixes for mingw
|
| Thu, 09 Apr 2020 14:59:19 +0100 |
Chris Cannam |
Add missing include
|
| Thu, 09 Apr 2020 11:23:40 +0100 |
Chris Cannam |
Use our base column type
|
| Mon, 06 Apr 2020 13:56:00 +0100 |
Chris Cannam |
Merge from branch sensible-delimited-data-strings
|
| Fri, 03 Apr 2020 17:12:37 +0100 |
Chris Cannam |
Switch to the StringExport api now found in svcore
sensible-delimited-data-strings
|
| Fri, 03 Apr 2020 12:12:47 +0100 |
Chris Cannam |
Merge from branch audio-source-refactor. Mostly handling changes to plugin ownership
|
| Fri, 03 Apr 2020 11:35:40 +0100 |
Chris Cannam |
Remove unused variable
|
| Fri, 03 Apr 2020 11:35:36 +0100 |
Chris Cannam |
That didn't work well on a machine with a higher scaled-pixel ratio, try this
|
| Tue, 31 Mar 2020 13:45:06 +0100 |
Chris Cannam |
Provide context menu in LevelPanToolButton, + a bit of tidying
|
| Mon, 30 Mar 2020 11:29:16 +0100 |
Chris Cannam |
Add right-button context menu to panner widget
|
| Fri, 27 Mar 2020 14:36:11 +0000 |
Chris Cannam |
Add context menus to property box controls
|
| Fri, 27 Mar 2020 11:04:56 +0000 |
Chris Cannam |
Add context menu to Thumbwheel
|
| Fri, 27 Mar 2020 11:04:48 +0000 |
Chris Cannam |
Add test for whether presentation name is at default or not
|
| Thu, 26 Mar 2020 12:10:55 +0000 |
Chris Cannam |
Add optional context menu to AudioDial
|
| Thu, 26 Mar 2020 11:16:47 +0000 |
Chris Cannam |
Factor out the menu titling code formerly in MainWindow
|
| Wed, 25 Mar 2020 12:08:34 +0000 |
Chris Cannam |
Add a tab-bar context menu signal to the property stack
|
| Fri, 20 Mar 2020 16:31:23 +0000 |
Chris Cannam |
Use shared_ptr for plugin instances throughout; also descriptors are copyable
audio-source-refactor
|
| Fri, 24 Jan 2020 15:11:08 +0000 |
Chris Cannam |
Merge from branch background-mode
|
| Fri, 24 Jan 2020 12:40:27 +0000 |
Chris Cannam |
Add optional unset entry to colour combo
background-mode
|
| Fri, 24 Jan 2020 12:40:07 +0000 |
Chris Cannam |
Make nearby-colour matching a bit more sophisticated, with slightly better algorithm (we think?) and ability to insist on dark/light background
background-mode
|
| Thu, 23 Jan 2020 15:43:51 +0000 |
Chris Cannam |
Pick accent colour from OS theme if appropriate
background-mode
|
| Thu, 23 Jan 2020 15:14:07 +0000 |
Chris Cannam |
Apply sensible highlight/link colours
background-mode
|
| Mon, 20 Jan 2020 17:18:42 +0000 |
Chris Cannam |
More sensible approach to colour setting on Windows
background-mode
|
| Fri, 17 Jan 2020 21:36:54 +0000 |
Chris Cannam |
Windows stylesheet
background-mode
|
| Fri, 17 Jan 2020 13:45:57 +0000 |
Chris Cannam |
Comments and palette adjustments
|
| Wed, 15 Jan 2020 13:58:33 +0000 |
Chris Cannam |
Cut this down, we don't need the things we were calculating (also avoid possible null pointer dereference of v)
|
| Wed, 15 Jan 2020 13:58:11 +0000 |
Chris Cannam |
Model -> layer, + word wrap
|
| Wed, 15 Jan 2020 13:57:52 +0000 |
Chris Cannam |
Clarify comment
|
| Tue, 14 Jan 2020 15:48:44 +0000 |
Chris Cannam |
Merge from branch csv-export-dialog
|
| Tue, 14 Jan 2020 15:41:17 +0000 |
Chris Cannam |
Add CSV export dialog, + associated supporting changes
csv-export-dialog
|
| Tue, 14 Jan 2020 13:19:18 +0000 |
Chris Cannam |
Don't write empty lines
|
| Fri, 10 Jan 2020 14:54:27 +0000 |
Chris Cannam |
Merge from branch spectrogram-export
|
| Fri, 10 Jan 2020 14:30:26 +0000 |
Chris Cannam |
Add support for a header line on delimited data output
spectrogram-export
|
| Fri, 10 Jan 2020 11:12:33 +0000 |
Chris Cannam |
Add option to export timestamp column
spectrogram-export
|
| Thu, 09 Jan 2020 14:35:55 +0000 |
Chris Cannam |
Use Colour3DPlotExporter in line with SpectrogramLayer
spectrogram-export
|
| Thu, 09 Jan 2020 14:35:41 +0000 |
Chris Cannam |
Provide parameters needed for scale and thresholding
spectrogram-export
|
| Thu, 09 Jan 2020 14:34:51 +0000 |
Chris Cannam |
Handle scale factor, needed for all spectrogram export; handle thresholding (using gain/normalisation for threshold calculation) in peak frequency export
spectrogram-export
|
| Thu, 09 Jan 2020 14:29:21 +0000 |
Chris Cannam |
Give timer a parent so as not to leak it
spectrogram-export
|
| Wed, 08 Jan 2020 15:29:02 +0000 |
Chris Cannam |
Update in-progress comments only
spectrogram-export
|
| Tue, 07 Jan 2020 14:57:40 +0000 |
Chris Cannam |
Fix typo in range
spectrogram-export
|
| Tue, 07 Jan 2020 11:19:02 +0000 |
Chris Cannam |
Comment only
spectrogram-export
|
| Tue, 07 Jan 2020 11:18:57 +0000 |
Chris Cannam |
Handle peaks
spectrogram-export
|
| Tue, 07 Jan 2020 11:18:43 +0000 |
Chris Cannam |
Provide export model
spectrogram-export
|
| Mon, 06 Jan 2020 14:46:25 +0000 |
Chris Cannam |
Start work on spectrogram export code
spectrogram-export
|
| Fri, 22 Nov 2019 14:12:50 +0000 |
Chris Cannam |
Fix note numbering - ensure stable across whole track (as it used to be, but without scanning all notes in paint in order to do that)
|
| Thu, 21 Nov 2019 14:03:19 +0000 |
Chris Cannam |
Merge
|
| Thu, 21 Nov 2019 14:02:57 +0000 |
Chris Cannam |
Fixes to NoteLayer, particularly to calculation of vertical scale when model unit is not Hz. To avoid inconsistency we now behave as if the unit is always Hz from the point of view of the external API and display, converting at the point where we obtain values from the events themselves. Also various fixes to editing.
|
| Thu, 31 Oct 2019 15:32:13 +0000 |
Chris Cannam |
Further replacements of QRect::right() with the right (arf) calculation
|
| Thu, 31 Oct 2019 15:32:01 +0000 |
Chris Cannam |
Use x + width() instead of QRect::right(), which doesn't return what we need and leaves us a pixel short; also subtract the resolution from the start frame to avoid scrolling scraggy single-pixel lines when we should be drawing nice fat ones
|
| Thu, 17 Oct 2019 14:44:22 +0100 |
Chris Cannam |
Permit getScaleProvidingLayerForUnit to return a dormant layer if there is no visible alternative. This is necessary to avoid the scale disappearing in Tony when the spectrogram is toggled off.
|
| Thu, 17 Oct 2019 11:12:54 +0100 |
Chris Cannam |
Pass a y-coord, optionally, to Layer::snapToFeatureFrame. This is necessary for BoxLayer which needs to coordinate its snaps with the box it is highlighting for editing. Then in BoxLayer, merge getPointToDrag and getLocalPoints into a single getLocalPoint and use this throughout.
|
| Thu, 17 Oct 2019 10:26:21 +0100 |
Chris Cannam |
Update getPointToDrag to prefer boxes that are containing the mouse position in height as well as width
|
| Wed, 16 Oct 2019 16:20:12 +0100 |
Chris Cannam |
Make audio dial more visible in Mac dark mode
|
| Wed, 16 Oct 2019 13:02:52 +0100 |
Chris Cannam |
Return true from getValueExtents always, just with no unit in the case where we don't have a nice neat scale. This should preserve the property of preventing other layers auto-aligning to us, while also ensuring we don't get overlooked for the purposes of drawing our own scale in a situation where a scale-less layer is on top of us
|
| Wed, 16 Oct 2019 13:01:23 +0100 |
Chris Cannam |
Debug output
|
| Wed, 16 Oct 2019 12:23:36 +0100 |
Chris Cannam |
Overhaul the way WaveformLayer reports value and display extents. The previous logic has been nonsense for a very long time, excused only by the fact that it was very seldom relevant (only really if another layer with unit V came along that wanted to auto-align with it). Partial fix for #1954 Peculiar alignment for Amplitude Follower y-scale in Auto-Align mode
|
| Wed, 16 Oct 2019 12:19:04 +0100 |
Chris Cannam |
Fix getScaleProvidingLayerForUnit to make it only return a layer that actually has display extents. Modify getVisibleExtentsForUnit to make it more like the behaviour in 3.x: where no layer with display extents is found, use the union of the value extents of layers with the right unit. Partial fix for #1954 Peculiar alignment for Amplitude Follower y-scale in Auto-Align mode.
|
| Wed, 16 Oct 2019 12:13:28 +0100 |
Chris Cannam |
Debug output tweaks
|
| Tue, 15 Oct 2019 14:53:25 +0100 |
Chris Cannam |
Overhaul choice of layer to show scale, in Pane::drawVerticalScale, making it call out to the same logic used by View::getVisibleExtentsForUnit when appropriate. Also refuse to accept scale from dormant top layer.
|
| Tue, 15 Oct 2019 14:51:58 +0100 |
Chris Cannam |
Avoid compiler warning
|
| Tue, 15 Oct 2019 11:40:56 +0100 |
Chris Cannam |
Clarify naming of some view-related methods. Rename LayerGeometryProvider::getValueExtents to getVisibleExtentsForUnit, and View::getTextLabelHeight to getTextLabelYCoord. Add View::getVisibleExtentsForAnyUnit to be used to determine which unit to adopt in a new e.g. box layer.
|
| Tue, 15 Oct 2019 09:32:24 +0100 |
Chris Cannam |
Fix #1951 Selecting row in data editor with multiple items having same frame always selects the first
|
| Mon, 14 Oct 2019 14:20:02 +0100 |
Chris Cannam |
Tidy / debug
|
| Wed, 09 Oct 2019 13:45:17 +0100 |
Chris Cannam |
Fix #1904 Scrolling colour 3d plot does not always work when in View normalisation mode. We shouldn't imagine we've just invalidated the cache if the truth is that we've only just created the renderer
|
| Wed, 09 Oct 2019 11:51:19 +0100 |
Chris Cannam |
Fix failure to apply new frame when pasting events
|
| Wed, 09 Oct 2019 11:33:33 +0100 |
Chris Cannam |
Further light streamlining
|
| Wed, 09 Oct 2019 11:17:26 +0100 |
Chris Cannam |
Slightly streamline image scaling
|
| Mon, 07 Oct 2019 14:30:13 +0100 |
Chris Cannam |
Don't create alignment views at all if not requested (now that the request is made only at construction time)
|
| Mon, 07 Oct 2019 14:08:23 +0100 |
Chris Cannam |
Fix alignment of property box when switching back on after having been hidden
|
| Mon, 07 Oct 2019 09:43:31 +0100 |
Chris Cannam |
Fix compiler warning
|
| Fri, 04 Oct 2019 16:35:22 +0100 |
Chris Cannam |
Fix goof
|
| Fri, 04 Oct 2019 13:51:24 +0100 |
Chris Cannam |
Rework PaneStack so that the options that generally aren't (or can't be) changed after construction are supplied to the constructor instead of being set through setter methods.
|
| Fri, 04 Oct 2019 13:37:39 +0100 |
Chris Cannam |
Debug bits
|
| Wed, 25 Sep 2019 14:11:42 +0100 |
Chris Cannam |
Merge
|
| Wed, 25 Sep 2019 13:42:17 +0100 |
Chris Cannam |
Make the waveform layer do the expected thing when MergeChannels mode (i.e. butterfly mode) is enabled even if there is only 1 channel. This combination isn't actually available in the UI for SV, but it's useful for Sonic Lineup.
|
| Wed, 25 Sep 2019 13:48:04 +0100 |
Chris Cannam |
Merge from branch time-frequency-boxes
|
| Wed, 25 Sep 2019 11:09:06 +0100 |
Chris Cannam |
With duration and two values, propose a box model (value and extent)
time-frequency-boxes
|
| Wed, 25 Sep 2019 09:46:27 +0100 |
Chris Cannam |
Tidying
time-frequency-boxes
|
| Wed, 25 Sep 2019 09:46:20 +0100 |
Chris Cannam |
Make getTopLayerDisplayExtents public (ugh) for use when setting up a new empty layer with auto-align over the top of another one
time-frequency-boxes
|
| Wed, 25 Sep 2019 09:45:42 +0100 |
Chris Cannam |
Rename TimeFrequencyBoxLayer to just BoxLayer, supporting vertical scales other than Hz
time-frequency-boxes
|
| Sat, 21 Sep 2019 19:13:14 +0100 |
Chris Cannam |
Fix confusion about capture scope with MSVC
time-frequency-boxes
|
| Fri, 20 Sep 2019 14:48:55 +0100 |
Chris Cannam |
This is what the icon is actually called
time-frequency-boxes
|
| Fri, 20 Sep 2019 14:19:17 +0100 |
Chris Cannam |
Item-editing updates needed for time-frequency box layer
time-frequency-boxes
|
| Fri, 20 Sep 2019 11:25:47 +0100 |
Chris Cannam |
Fixes to drag and paint in time-freq box layer
time-frequency-boxes
|
| Fri, 20 Sep 2019 11:25:22 +0100 |
Chris Cannam |
Shorten name (Boxes -> Box)
time-frequency-boxes
|
| Thu, 19 Sep 2019 17:15:36 +0100 |
Chris Cannam |
Add TimeFrequencyBoxes to layer factory
time-frequency-boxes
|
| Thu, 19 Sep 2019 15:18:28 +0100 |
Chris Cannam |
Introduce time-frequency box layer
time-frequency-boxes
|
| Tue, 17 Sep 2019 12:50:58 +0100 |
Chris Cannam |
Merge
|
| Tue, 17 Sep 2019 12:50:34 +0100 |
Chris Cannam |
The default key frame map is not working well at the moment, because its extents are not being properly updated as the models they depend on are loaded. Leave it empty for now.
|
| Mon, 16 Sep 2019 13:34:56 +0100 |
Chris Cannam |
Comment
|
| Fri, 13 Sep 2019 17:40:59 +0100 |
Chris Cannam |
Fix, I think, #1914 Mounting rounding error when dragging aligned view left/right - and therefore the associated #1874 Pointer position becomes increasingly erroneous when rewinding with alignment active
|
| Fri, 13 Sep 2019 17:27:14 +0100 |
Chris Cannam |
Debug updates
|
| Fri, 13 Sep 2019 17:26:11 +0100 |
Chris Cannam |
Debug changes
|
| Thu, 12 Sep 2019 13:50:24 +0100 |
Chris Cannam |
Only set maximum frequency on FFT model when in a special verticallyFixed mode
|
| Thu, 12 Sep 2019 11:53:40 +0100 |
Chris Cannam |
Set maximum frequency on FFT model to reduce cache size (experimental)
|
| Thu, 12 Sep 2019 11:53:17 +0100 |
Chris Cannam |
Pass the cache pointer through rather than looking it up afresh from the model id for each column
|
| Wed, 11 Sep 2019 20:36:04 +0100 |
Chris Cannam |
Generate peak cache directly from model, not from whole-model cache (which turns out to be very slow for large models)
|
| Wed, 11 Sep 2019 11:21:00 +0100 |
Chris Cannam |
More debug bits
|
| Tue, 10 Sep 2019 16:35:28 +0100 |
Chris Cannam |
Debug concerns
|
| Wed, 04 Sep 2019 17:31:21 +0100 |
Chris Cannam |
Indentation
|
| Thu, 15 Aug 2019 18:18:22 +0100 |
Chris Cannam |
Show relative pitch if recorded
|
| Wed, 14 Aug 2019 10:58:24 +0100 |
Chris Cannam |
Separate out handling of alignment progress bar from the layer progress bars and fix tendency to have them hanging around even when alignment has completed
|
| Tue, 13 Aug 2019 15:10:32 +0100 |
Chris Cannam |
Toward trying to figure out a progress-bar problem
|
| Tue, 13 Aug 2019 14:35:29 +0100 |
Chris Cannam |
Ensure rightCropFrame doesn't end up rounded to the left of the desired end pixel
|
| Fri, 09 Aug 2019 19:02:51 +0100 |
Chris Cannam |
Improve drawn alignment of lines in AlignmentView against the view below; also cache the mapping locations
|
| Thu, 08 Aug 2019 13:33:38 +0100 |
Chris Cannam |
Debug
|
| Thu, 08 Aug 2019 13:33:30 +0100 |
Chris Cannam |
Fix overlooked alignment
|
| Fri, 02 Aug 2019 16:44:32 +0100 |
Chris Cannam |
Attempt a mechanism for the View to time-align a layer on display using an aligning version of the ViewProxy
|
| Fri, 02 Aug 2019 16:42:32 +0100 |
Chris Cannam |
Add direct method to get source model
|
| Fri, 19 Jul 2019 16:10:19 +0100 |
Chris Cannam |
Correct erroneous signal signature
|
| Thu, 18 Jul 2019 13:18:19 +0100 |
Chris Cannam |
Fix failure to show alignment progress bar
|
| Wed, 17 Jul 2019 14:25:16 +0100 |
Chris Cannam |
Merge from branch by-id
|
| Wed, 17 Jul 2019 13:12:56 +0100 |
Chris Cannam |
Tidy; also don't show cancel buttons for alignments
by-id
|
| Wed, 17 Jul 2019 11:20:08 +0100 |
Chris Cannam |
Fix inability to set layer's model to None
by-id
|
| Mon, 15 Jul 2019 13:49:57 +0100 |
Chris Cannam |
Emit a signal when a cancel is pressed
by-id
|
| Fri, 12 Jul 2019 16:29:59 +0100 |
Chris Cannam |
Comment
by-id
|
| Fri, 05 Jul 2019 15:34:50 +0100 |
Chris Cannam |
Update for removal of (public) getId from Model
by-id
|
| Thu, 04 Jul 2019 18:04:44 +0100 |
Chris Cannam |
Update for changes to PlayParameters
by-id
|
| Wed, 03 Jul 2019 14:20:42 +0100 |
Chris Cannam |
Further ModelId updates
by-id
|
| Wed, 03 Jul 2019 08:55:02 +0100 |
Chris Cannam |
Fix a number of Qt deprecation warnings
by-id
|
| Tue, 02 Jul 2019 19:05:45 +0100 |
Chris Cannam |
Further ModelId updates
by-id
|
| Tue, 02 Jul 2019 15:38:37 +0100 |
Chris Cannam |
Couple more updates
by-id
|
| Tue, 02 Jul 2019 15:29:17 +0100 |
Chris Cannam |
Further layer updates
by-id
|
| Tue, 02 Jul 2019 14:08:44 +0100 |
Chris Cannam |
Further layer updates for ModelById
by-id
|
| Tue, 02 Jul 2019 11:49:52 +0100 |
Chris Cannam |
Further layer updates for ModelById
by-id
|
| Mon, 01 Jul 2019 14:25:53 +0100 |
Chris Cannam |
Further layer updates
by-id
|
| Mon, 01 Jul 2019 14:17:13 +0100 |
Chris Cannam |
More layer updates
by-id
|
| Fri, 28 Jun 2019 17:37:22 +0100 |
Chris Cannam |
Further layer updates for ById
by-id
|
| Thu, 27 Jun 2019 13:16:25 +0100 |
Chris Cannam |
Some work on updating layers for ModelId bits
by-id
|
| Thu, 13 Jun 2019 15:35:01 +0100 |
Chris Cannam |
Add opportunistic-editing toggle
|
| Thu, 13 Jun 2019 15:05:25 +0100 |
Chris Cannam |
Don't try to draw scale from a dormant layer!
|
| Fri, 24 May 2019 15:14:09 +0100 |
Chris Cannam |
Merge
|
| Fri, 24 May 2019 15:13:57 +0100 |
Chris Cannam |
Don't attempt performance alignment when not in align mode
|
| Fri, 24 May 2019 14:29:19 +0100 |
Chris Cannam |
Fix incorrect frequency display in peak-freq mode
|
| Wed, 22 May 2019 15:40:19 +0100 |
Chris Cannam |
Branch
3.3-stable
|
| Mon, 20 May 2019 15:04:32 +0100 |
Chris Cannam |
Fix incorrect visibility of alignment view when not requested; fix current indicator size when x-button is disabled
|
| Mon, 20 May 2019 15:04:07 +0100 |
Chris Cannam |
Fix incorrect repaint at left edge in segmentation mode
|
| Fri, 17 May 2019 14:37:02 +0100 |
Chris Cannam |
Add option to suppress close button on first pane
|
| Fri, 17 May 2019 10:02:52 +0100 |
Chris Cannam |
Merge from branch single-point
|
| Thu, 16 May 2019 15:50:11 +0100 |
Chris Cannam |
Make it possible to disable cancel buttons
single-point
|
| Thu, 16 May 2019 15:50:02 +0100 |
Chris Cannam |
Avoid showing progress bars for dormant layers. They'll typically be duplicates, e.g. in the vect app you can get many dormant layers all reporting the alignment completion at the same time. (Maybe it would be better just to reject progress bars for alignment in dormant layers? Hm)
single-point
|
| Fri, 10 May 2019 15:50:51 +0100 |
Chris Cannam |
Comment
single-point
|
| Fri, 10 May 2019 09:22:20 +0100 |
Chris Cannam |
Add setLayerProperties (from XML string)
single-point
|
| Fri, 10 May 2019 08:44:32 +0100 |
Chris Cannam |
Remove margin from inner frame
single-point
|
| Thu, 09 May 2019 13:42:18 +0100 |
Chris Cannam |
Smoother cache & colour management in colour 3d plots
single-point
|
| Fri, 03 May 2019 17:45:39 +0100 |
Chris Cannam |
Make inversion configurable in settings
single-point
|
| Wed, 01 May 2019 15:15:26 +0100 |
Chris Cannam |
When invalidating cache in a time-constrained context, don't start rendering in the same cycle as well - leave it for a further update. Slightly experimental effort to make the UI feel more responsive.
single-point
|
| Wed, 01 May 2019 14:41:28 +0100 |
Chris Cannam |
Tweak peak-cache allocations etc in the hope of making long spectrograms a little faster to re-render
single-point
|
| Wed, 01 May 2019 14:40:51 +0100 |
Chris Cannam |
Don't discard large wheel deltas; just clamp them
single-point
|
| Wed, 01 May 2019 11:46:09 +0100 |
Chris Cannam |
Some debug bits
single-point
|
| Tue, 30 Apr 2019 15:53:21 +0100 |
Chris Cannam |
Add option to make pane sizes auto-resize-only (i.e. remove user control via a splitter); also place alignment views above panes instead of below, meaning the extra bit of space that we currently have for the pane without one at least goes to the primary pane
single-point
|
| Tue, 30 Apr 2019 14:02:32 +0100 |
Chris Cannam |
Shrink alignment panes to sensible size on non-hi-dpi screens
single-point
|
| Tue, 30 Apr 2019 14:02:03 +0100 |
Chris Cannam |
Add getNearbyColourIndex to ColourDatabase; tweak getContrastingColour for bright colours; add comments
single-point
|
| Thu, 25 Apr 2019 17:07:04 +0100 |
Chris Cannam |
Avoid showing final (useless) alignment view
single-point
|
| Wed, 24 Apr 2019 15:42:35 +0100 |
Chris Cannam |
Make AudioDial a bit more visible with a dark background
single-point
|
| Wed, 24 Apr 2019 11:45:02 +0100 |
Chris Cannam |
Merge from default branch
single-point
|
| Wed, 24 Apr 2019 11:29:53 +0100 |
Chris Cannam |
Comment
|
| Tue, 23 Apr 2019 16:17:33 +0100 |
Chris Cannam |
Add function to request multiple filenames
|
| Thu, 28 Mar 2019 11:55:31 +0000 |
Chris Cannam |
Update to using export IDs stored in XmlExportables
single-point
|
| Fri, 22 Mar 2019 17:49:15 +0000 |
Chris Cannam |
Use updated ImageModel
single-point
|
| Fri, 22 Mar 2019 11:05:11 +0000 |
Chris Cannam |
Use updated TextModel
single-point
|
| Thu, 21 Mar 2019 15:22:19 +0000 |
Chris Cannam |
Fix tendency of start position of measure rect to wander as you drag out the rect (at certain zoom resolutions)
single-point
|
| Thu, 21 Mar 2019 15:25:05 +0000 |
Chris Cannam |
Merge
|
| Thu, 21 Mar 2019 15:22:20 +0000 |
Chris Cannam |
Fix tendency of start position of measure rect to wander as you drag out the rec
|
| Thu, 21 Mar 2019 13:34:08 +0000 |
Chris Cannam |
Updates for SparseOneDimensionalModel in new API
single-point
|
| Wed, 20 Mar 2019 15:46:17 +0000 |
Chris Cannam |
Further snap fixes
single-point
|
| Wed, 20 Mar 2019 14:59:34 +0000 |
Chris Cannam |
Begin fixing the various snap operations. Also remove SnapNearest, which is never used and seems to consume more lines of code than the rest!
single-point
|
| Wed, 20 Mar 2019 11:18:45 +0000 |
Chris Cannam |
Use overspill to render time-value point line properly at edges
single-point
|
| Tue, 19 Mar 2019 13:06:35 +0000 |
Chris Cannam |
Update TimeValueLayer etc
single-point
|
| Fri, 15 Mar 2019 14:24:22 +0000 |
Chris Cannam |
Update RegionLayer to updated RegionModel
single-point
|
| Fri, 15 Mar 2019 11:09:17 +0000 |
Chris Cannam |
Update to use external set of commands
single-point
|
| Thu, 14 Mar 2019 15:32:58 +0000 |
Chris Cannam |
Update following FlexiNoteModel removal, using new NoteModel API where flexi was previously used
single-point
|
| Thu, 14 Mar 2019 13:12:25 +0000 |
Chris Cannam |
Finish updating NoteLayer to single-point API
single-point
|
| Wed, 13 Mar 2019 16:00:55 +0000 |
Chris Cannam |
Toward getting NoteLayer to work with single-point APIs
single-point
|
| Fri, 08 Mar 2019 13:37:30 +0000 |
Chris Cannam |
Update to Event api in place of Clipboard points
single-point
|
| Tue, 05 Mar 2019 10:02:48 +0000 |
Chris Cannam |
Keep the point being edited highlighted while the edit dialog is open
|
| Mon, 18 Feb 2019 14:33:35 +0000 |
Chris Cannam |
Fix inadvertent hardcoding of SV file extension
|
| Thu, 14 Feb 2019 13:12:44 +0000 |
Chris Cannam |
Merge
|
| Thu, 14 Feb 2019 13:12:36 +0000 |
Chris Cannam |
Comments
|
| Thu, 14 Feb 2019 13:04:57 +0000 |
Chris Cannam |
Use zero-width pen when zoomed out - this seems to make a huge difference to speed when rendering on top of another layer, for some reason
|
| Wed, 23 Jan 2019 14:44:16 +0000 |
Chris Cannam |
Merge
|
| Mon, 21 Jan 2019 10:08:26 +0000 |
Chris Cannam |
Fix potential divide-by-zero
|
| Mon, 21 Jan 2019 10:07:36 +0000 |
Chris Cannam |
Avoid compiler warning
|
| Wed, 09 Jan 2019 15:24:51 +0000 |
Chris Cannam |
Merge from branch fix-static-analysis
|
| Wed, 09 Jan 2019 14:41:52 +0000 |
Chris Cannam |
Support changing the separator (if more than one plausible one is found) and repopulating the dialog
|
| Wed, 19 Dec 2018 10:40:17 +0000 |
Chris Cannam |
Debug tweaks
|
| Wed, 19 Dec 2018 10:40:09 +0000 |
Chris Cannam |
Sample a column only if it is set (avoids flash of mis-ranged material when scrolling with view normalisation on)
|
| Tue, 04 Dec 2018 13:49:09 +0000 |
Chris Cannam |
Merge from default branch
fix-static-analysis
|
| Thu, 29 Nov 2018 11:57:30 +0000 |
Chris Cannam |
Fix erasing of Region layer labels as the playhead moves over them
|
| Mon, 26 Nov 2018 14:33:54 +0000 |
Chris Cannam |
Use nullptr throughout
fix-static-analysis
|
| Mon, 26 Nov 2018 13:52:57 +0000 |
Chris Cannam |
Header guards
fix-static-analysis
|
| Mon, 26 Nov 2018 13:52:27 +0000 |
Chris Cannam |
Use override throughout
fix-static-analysis
|
| Thu, 22 Nov 2018 14:55:38 +0000 |
Chris Cannam |
Fixes from clang modernize-use-override
fix-static-analysis
|
| Fri, 16 Nov 2018 09:01:38 +0000 |
Chris Cannam |
Make horizontal wheeling a bit less crazily fast in the absence of fine delta information
|
| Thu, 15 Nov 2018 15:08:08 +0000 |
Chris Cannam |
Retain consistent min freq (rather than min bin no) when changing fft parameters in spectrum; scale ffts by window size rather than fft size in case of oversampling, to avoid fading out because of scale factor including zero padding
|
| Thu, 15 Nov 2018 14:18:26 +0000 |
Chris Cannam |
Handle integer pixel scaling as well
|
| Thu, 15 Nov 2018 14:04:32 +0000 |
Chris Cannam |
Scale pen for retina display on macOS as well as for hidpi display elsewhere
|
| Thu, 15 Nov 2018 13:06:38 +0000 |
Chris Cannam |
Different approach to x-coord calculation in slice layer - let's acknowledge that we really do have two different types of model, those whose "bins" are actually at a single value (frequency in the case of the spectrum) and those whose bins are just labels.
|
| Wed, 14 Nov 2018 15:47:21 +0000 |
Chris Cannam |
Fixes to spectrum axis calculations, + default to starting at bin 1
|
| Wed, 14 Nov 2018 15:14:21 +0000 |
Chris Cannam |
We need to draw illumination label *after* the spectrum...
|
| Wed, 14 Nov 2018 15:04:04 +0000 |
Chris Cannam |
Fix some incorrect pixel scaling
|
| Wed, 14 Nov 2018 14:29:08 +0000 |
Chris Cannam |
Fix compiler warning
|
| Wed, 14 Nov 2018 14:23:17 +0000 |
Chris Cannam |
Merge from branch spectrogramparam
|
| Wed, 14 Nov 2018 14:17:06 +0000 |
Chris Cannam |
Various tweaks & fixes to log-scale handling in spectrum. We can't easily preserve the nice behaviour where peaks stay in place as fft size changes, without potentially losing a bit of low-frequency information
spectrogramparam
|
| Wed, 14 Nov 2018 14:16:06 +0000 |
Chris Cannam |
Correct positioning for centre line when antialiasing with non-0-width pen
spectrogramparam
|
| Wed, 14 Nov 2018 11:01:18 +0000 |
Chris Cannam |
Highlight the current peak line in the spectrum (when shown); also a fix to the crosshair labelling
spectrogramparam
|
| Tue, 13 Nov 2018 15:16:48 +0000 |
Chris Cannam |
Toward highlighting peaks on spectrum
spectrogramparam
|
| Tue, 13 Nov 2018 14:48:42 +0000 |
Chris Cannam |
Move layer name text up a bit when rendering on a layer with a horizontal scale (i.e. spectrum)
spectrogramparam
|
| Tue, 13 Nov 2018 14:06:48 +0000 |
Chris Cannam |
Make "zoom to region" work sensibly for slice/spectrum layers; ensure that min/max bin are remapped properly when changing fft size
spectrogramparam
|
| Tue, 13 Nov 2018 13:39:01 +0000 |
Chris Cannam |
Make mention of the shift-drag feature and zooming in the status text
spectrogramparam
|
| Mon, 12 Nov 2018 14:48:42 +0000 |
Chris Cannam |
Small speedups
spectrogramparam
|
| Mon, 12 Nov 2018 11:34:34 +0000 |
Chris Cannam |
Use log-frequency rather than log-bin for calculating x coord in spectrum. This has the advantage that frequency positions don't move when we change the window size or oversampling ratio, but it does give us an unhelpfully large amount of space for very low frequencies - to be considered
spectrogramparam
|
| Thu, 08 Nov 2018 12:55:36 +0000 |
Chris Cannam |
Retrieve only the values already determined to be peaks
spectrogramparam
|
| Thu, 08 Nov 2018 11:12:04 +0000 |
Chris Cannam |
Fix "colour" rendering for spectrum (now resembles a filled "line" mode rather than a filled "block" mode)
spectrogramparam
|
| Wed, 07 Nov 2018 15:59:10 +0000 |
Chris Cannam |
Switch spectrum to antialiased drawing with considerable speedup for the dense areas; take horizontal scale height into account when rendering slice layer height
spectrogramparam
|
| Wed, 07 Nov 2018 11:37:51 +0000 |
Chris Cannam |
Add oversampling option to spectrum as well
spectrogramparam
|
| Tue, 06 Nov 2018 15:42:35 +0000 |
Chris Cannam |
Merge from default branch
spectrogramparam
|
| Tue, 06 Nov 2018 15:42:06 +0000 |
Chris Cannam |
Make the context help for custom controls explain how to reset them
|
| Tue, 06 Nov 2018 13:36:04 +0000 |
Chris Cannam |
Experimental oversampling param
spectrogramparam
|
| Tue, 06 Nov 2018 13:35:47 +0000 |
Chris Cannam |
Avoid nan/inf values (and consequent crash) in colour scale range
|
| Tue, 06 Nov 2018 13:34:56 +0000 |
Chris Cannam |
Use label of property for tooltip, not just id of it
|
| Tue, 06 Nov 2018 11:13:13 +0000 |
Chris Cannam |
Merge from branch zoom
|
| Tue, 06 Nov 2018 10:51:46 +0000 |
Chris Cannam |
Fix incorrect start/end overlay drawing when zoomed far in
zoom
|
| Tue, 06 Nov 2018 08:59:03 +0000 |
Chris Cannam |
Merge from default branch
zoom
|
| Mon, 05 Nov 2018 13:30:21 +0000 |
Chris Cannam |
Scaling tweaks
|
| Fri, 02 Nov 2018 15:23:53 +0000 |
Chris Cannam |
Short-circuit drawing a little bit for contiguous ranges
|
| Fri, 02 Nov 2018 15:23:42 +0000 |
Chris Cannam |
Progressively increase sample-box size slightly
|
| Thu, 01 Nov 2018 15:11:39 +0000 |
Chris Cannam |
Initialise level and pan from current state of layer's parameters (e.g. when reloading session)
waverevision
|
| Thu, 01 Nov 2018 15:11:21 +0000 |
Chris Cannam |
Use a distinguishable text for this state
waverevision
|
| Thu, 01 Nov 2018 10:12:12 +0000 |
Chris Cannam |
Merge branch waverevision
|
| Wed, 31 Oct 2018 15:06:32 +0000 |
Chris Cannam |
Rework waveform renderer to use smooth paths, aiming to get near-pixel-identical results when zoomed out far enough for a single path not to be relevant
waverevision
|
| Tue, 30 Oct 2018 16:23:03 +0000 |
Chris Cannam |
Fix the mix/merge channels behaviour in pixels-per-frame zone
|
| Tue, 30 Oct 2018 15:32:05 +0000 |
Chris Cannam |
Minor tidying
|
| Tue, 30 Oct 2018 15:32:01 +0000 |
Chris Cannam |
Add show-derivative option but, like inverting the colour scale, I don't think it's as useful as I'd hoped
|
| Tue, 30 Oct 2018 14:00:20 +0000 |
Chris Cannam |
Fix inconsistency between centre frame actually set and centre frame notified as set, which caused the start frame location to creep out of place gradually as you page through
|
| Thu, 18 Oct 2018 13:21:56 +0100 |
Chris Cannam |
Add mechanism for saving/loading colour maps by name/id rather than by numerical index, for future compatibility when adding to or changing the supported colour maps. Add two new colour maps (and one old one). Write out backward-compatible numerical indices for use when reloading in older versions. Also add a mechanism to invert the colour map, though I don't think it turns out useful enough to include in the UI.
|
| Fri, 12 Oct 2018 11:17:29 +0100 |
Chris Cannam |
Merge
|
| Fri, 05 Oct 2018 10:25:52 +0100 |
Chris Cannam |
Merge from default branch
zoom
|
| Thu, 11 Oct 2018 18:26:45 +0100 |
Chris Cannam |
Merge
|
| Thu, 11 Oct 2018 18:26:30 +0100 |
Chris Cannam |
Oops, typeof is not standard
|
| Thu, 11 Oct 2018 14:59:34 +0100 |
Chris Cannam |
Rework cacheing logic to reduce the number of reallocations and be more correct about the repaint areas. I don't expect the difference to be really noticeable but in theory performance should be a little better...
|
| Thu, 11 Oct 2018 10:15:45 +0100 |
Chris Cannam |
Fix ugly text positioning/drawing on osx
|
| Wed, 10 Oct 2018 14:50:47 +0100 |
Chris Cannam |
Remove some debug bits
|
| Wed, 10 Oct 2018 14:33:10 +0100 |
Chris Cannam |
Use zoom constraints more consistently, including the new RelativelyFine one
|
| Wed, 10 Oct 2018 08:44:27 +0100 |
Chris Cannam |
Merge from branch zoom
|
| Fri, 05 Oct 2018 09:59:41 +0100 |
Chris Cannam |
Debug tweaks
zoom
|
| Wed, 03 Oct 2018 12:59:55 +0100 |
Chris Cannam |
Scale positioning
|
| Wed, 03 Oct 2018 12:59:47 +0100 |
Chris Cannam |
Use newly-introduced cancel icon instead of fileclose. The deceptive name of fileclose had me thinking nobody was using it, so I removed it and the cancel buttons disappeared
|
| Mon, 01 Oct 2018 15:48:20 +0100 |
Chris Cannam |
Merge from default branch
zoom
|
| Mon, 01 Oct 2018 14:46:36 +0100 |
Chris Cannam |
Avoid blowing up when faced with min==max in parameter range
|
| Mon, 01 Oct 2018 14:37:58 +0100 |
Chris Cannam |
Use locale-aware comparators for sorting user-visible strings
|
| Fri, 28 Sep 2018 18:28:44 +0100 |
Chris Cannam |
Avoid overflow problems when dealing with large numbers of microseconds
zoom
|
| Fri, 28 Sep 2018 12:31:12 +0100 |
Chris Cannam |
Use more precise text rendering when zoomed in beyond the ms level
zoom
|
| Fri, 28 Sep 2018 09:12:54 +0100 |
Chris Cannam |
This is the correct size
zoom
|
| Thu, 27 Sep 2018 16:20:58 +0100 |
Chris Cannam |
Fix crash when scrolling beyond end of waveform (+ fix compiler warnings)
zoom
|
| Thu, 27 Sep 2018 15:54:02 +0100 |
Chris Cannam |
Fix stupidity
zoom
|
| Thu, 27 Sep 2018 15:20:25 +0100 |
Chris Cannam |
Fixes for TimeRuler spacing and for the boundaries of the WaveformLayer paint area
zoom
|
| Wed, 26 Sep 2018 13:03:16 +0100 |
Chris Cannam |
Remove WaveformOversampler again from here; it's now in svcore
zoom
|
| Wed, 26 Sep 2018 11:54:25 +0100 |
Chris Cannam |
Add custom waveform oversampler method
zoom
|
| Tue, 25 Sep 2018 16:38:50 +0100 |
Chris Cannam |
Get oversampled rendering almost working, but I think we need to take more care with the oversampling itself
zoom
|
| Tue, 25 Sep 2018 12:52:08 +0100 |
Chris Cannam |
Fix accidental always-auto-normalise
zoom
|
| Mon, 24 Sep 2018 14:40:48 +0100 |
Chris Cannam |
Toward oversampling rendering
zoom
|
| Fri, 21 Sep 2018 14:46:53 +0100 |
Chris Cannam |
Factor out paintChannelScaleGuides
zoom
|
| Fri, 21 Sep 2018 14:33:43 +0100 |
Chris Cannam |
Another tidy
zoom
|
| Fri, 21 Sep 2018 14:22:53 +0100 |
Chris Cannam |
A further refactor with range blocks
zoom
|
| Fri, 21 Sep 2018 14:01:09 +0100 |
Chris Cannam |
Refactor out paintChannel
zoom
|
| Fri, 21 Sep 2018 11:50:15 +0100 |
Chris Cannam |
Fix typo that created un-reloadable session file
zoom
|
| Fri, 21 Sep 2018 11:50:05 +0100 |
Chris Cannam |
Ensure getFrameForX returns value on zoom blocksize boundary; take advantage of that (this is essentially reverting to the same behaviour as in the default branch, which we should probably have done all along)
zoom
|
| Thu, 20 Sep 2018 15:42:12 +0100 |
Chris Cannam |
Responding to a hang due to mismatching zoom and block sizes
zoom
|
| Thu, 20 Sep 2018 13:14:15 +0100 |
Chris Cannam |
Avoid compiler warning
zoom
|
| Thu, 20 Sep 2018 11:45:26 +0100 |
Chris Cannam |
Further ZoomLevel fixes
zoom
|
| Thu, 20 Sep 2018 10:45:24 +0100 |
Chris Cannam |
More ZoomLevel updates
zoom
|
| Wed, 19 Sep 2018 15:42:22 +0100 |
Chris Cannam |
Gradual ZoomLevel updates
zoom
|
| Mon, 17 Sep 2018 13:51:31 +0100 |
Chris Cannam |
Merge from default branch
zoom
|
| Wed, 12 Sep 2018 15:58:11 +0100 |
Chris Cannam |
Merge from branch import-audio-data
|
| Wed, 12 Sep 2018 15:17:38 +0100 |
Chris Cannam |
Propose to take only value-like columns as audio samples, not all numeric ones - now that it's easy enough for the user to overrule
import-audio-data
|
| Fri, 07 Sep 2018 18:12:44 +0100 |
Chris Cannam |
Move out these bits which are now in CSVFormat
import-audio-data
|
| Thu, 06 Sep 2018 16:26:40 +0100 |
Chris Cannam |
Sample range
import-audio-data
|
| Thu, 06 Sep 2018 13:58:09 +0100 |
Chris Cannam |
Refactor; the two use-cases of CSVFormatDialog were turning out to be different enough to justify two separate classes
import-audio-data
|
| Thu, 06 Sep 2018 11:49:31 +0100 |
Chris Cannam |
Support audio-format CSV format selection in dialog
import-audio-data
|
| Tue, 04 Sep 2018 13:19:32 +0100 |
Chris Cannam |
Merge from default branch
import-audio-data
|
| Thu, 09 Aug 2018 16:09:52 +0100 |
Chris Cannam |
Tidy edges of scale area on Mac
|
| Wed, 04 Jul 2018 15:34:16 +0100 |
Chris Cannam |
Ensure scale appears for layer when drawn in AutoAlign mode without any other layer present to align to
|
| Wed, 04 Jul 2018 15:33:47 +0100 |
Chris Cannam |
Layers such as time-value layers with ColourDistinguishes property should use the dark background when a bright colour is selected. This is how it was always supposed to work, I think, but I broke it so long ago that this "fix" might itself come across as a surprising breaking change
|
| Thu, 28 Jun 2018 14:48:35 +0100 |
Chris Cannam |
Fix compiler warning
|
| Thu, 28 Jun 2018 14:49:00 +0100 |
Chris Cannam |
Handle additional case
import-audio-data
|
| Thu, 28 Jun 2018 14:48:48 +0100 |
Chris Cannam |
Rename guard
import-audio-data
|
| Thu, 28 Jun 2018 14:48:35 +0100 |
Chris Cannam |
Fix compiler warning
import-audio-data
|
| Tue, 26 Jun 2018 14:37:36 +0100 |
Chris Cannam |
Tool button on Mac (something has gone very wrong with the appearance of the push button in latest builds)
|
| Tue, 26 Jun 2018 14:36:56 +0100 |
Chris Cannam |
Never scale down
|
| Tue, 26 Jun 2018 08:35:49 +0100 |
Chris Cannam |
Improve level-pan rendering quality on non-retina OSX
|
| Mon, 25 Jun 2018 15:29:47 +0100 |
Chris Cannam |
Better rendering for widget cells
|
| Mon, 25 Jun 2018 14:16:16 +0100 |
Chris Cannam |
Slightly nicer pan handling, avoiding showing spurious >0dB peaks
|
| Fri, 22 Jun 2018 17:51:47 +0100 |
Chris Cannam |
Experiment with rounded rects
|
| Fri, 22 Jun 2018 17:19:48 +0100 |
Chris Cannam |
Collect the bits of bookkeeping for mouse wheel events, and use in all widgets
|
| Fri, 22 Jun 2018 13:41:54 +0100 |
Chris Cannam |
Proper handling for wheel rotation distance
|
| Thu, 21 Jun 2018 15:36:29 +0100 |
Chris Cannam |
Half-steps for level in level-pan widget
|
| Thu, 21 Jun 2018 10:43:14 +0100 |
Chris Cannam |
Ctrl-click on level-pan tool button now also resets to default
|
| Mon, 11 Jun 2018 14:40:36 +0100 |
Chris Cannam |
Merge from branch plugin-path-config
|
| Mon, 11 Jun 2018 11:38:09 +0100 |
Chris Cannam |
Fix compiler warning
plugin-path-config
|
| Fri, 08 Jun 2018 15:11:11 +0100 |
Chris Cannam |
Minor improvement to (still nasty) button layout on OSX
plugin-path-config
|
| Fri, 08 Jun 2018 14:31:47 +0100 |
Chris Cannam |
Use type keys as indices rather than labels
plugin-path-config
|
| Wed, 06 Jun 2018 15:55:49 +0100 |
Chris Cannam |
Fix erroneous tooltip
plugin-path-config
|
| Mon, 04 Jun 2018 15:44:57 +0100 |
Chris Cannam |
Show value of environment variable; populate for last plugin type by default (as that happens to be Vamp)
plugin-path-config
|
| Fri, 25 May 2018 16:05:51 +0100 |
Chris Cannam |
Various logic fixes, and use new setter-class structures
plugin-path-config
|
| Fri, 25 May 2018 13:39:08 +0100 |
Chris Cannam |
Plugin review dialog
plugin-path-config
|
| Wed, 23 May 2018 16:24:35 +0100 |
Chris Cannam |
Add "Add"
plugin-path-config
|
| Wed, 23 May 2018 11:52:19 +0100 |
Chris Cannam |
More work on plugin path configuration layout &c
plugin-path-config
|
| Mon, 21 May 2018 16:15:36 +0100 |
Chris Cannam |
Toward more than one plugin type in this widget
plugin-path-config
|
| Tue, 15 May 2018 15:25:04 +0100 |
Chris Cannam |
Grey-out meaningless buttons
plugin-path-config
|
| Tue, 15 May 2018 13:56:26 +0100 |
Chris Cannam |
Better editing mechanism
plugin-path-config
|
| Tue, 15 May 2018 11:18:07 +0100 |
Chris Cannam |
Up/down
plugin-path-config
|
| Fri, 11 May 2018 16:59:14 +0100 |
Chris Cannam |
Toward allowing the user to see (at least, and maybe change) the plugin path
plugin-path-config
|
| Tue, 08 May 2018 14:27:54 +0100 |
Chris Cannam |
Hack to ensure vertical scale lines are in the right place in pixel-doubling rendering
|
| Tue, 08 May 2018 14:07:22 +0100 |
Chris Cannam |
Tidy
|
| Thu, 03 May 2018 15:24:14 +0100 |
Chris Cannam |
Merge from branch horizontal-scale
|
| Thu, 03 May 2018 15:15:15 +0100 |
Chris Cannam |
Provide linear horizontal scale in spectrum as well as log; fix bin positioning and colour scale property box updating; ensure proper background colour and visibility of peak lines
horizontal-scale
|
| Wed, 02 May 2018 14:27:17 +0100 |
Chris Cannam |
Merge
horizontal-scale
|
| Wed, 02 May 2018 14:26:51 +0100 |
Chris Cannam |
Fix positioning of peak lines on spectrum layer (origin is already accounted for in the bin/frequency to x conversion functions)
|
| Wed, 02 May 2018 14:25:44 +0100 |
Chris Cannam |
Tweaks to horizontal scale
horizontal-scale
|
| Tue, 01 May 2018 16:32:35 +0100 |
Chris Cannam |
Draw some ticks
horizontal-scale
|
| Tue, 01 May 2018 16:14:22 +0100 |
Chris Cannam |
Branch toward adding horizontal numerical scales to things
horizontal-scale
|
| Thu, 26 Apr 2018 15:06:41 +0100 |
Chris Cannam |
Tidy
|
| Thu, 26 Apr 2018 09:27:01 +0100 |
Chris Cannam |
Scale scalable icon
|
| Tue, 24 Apr 2018 10:15:54 +0100 |
Chris Cannam |
Adjust y-coord of text labels to accommodate larger scaled fonts
|
| Mon, 23 Apr 2018 16:06:27 +0100 |
Chris Cannam |
Delete rows in reverse order for safety
|
| Mon, 23 Apr 2018 16:04:51 +0100 |
Chris Cannam |
Avoid crash when scrolling with an empty layer open
|
| Thu, 19 Apr 2018 14:36:16 +0100 |
Chris Cannam |
Make selection extents more visible on hi-dpi
|
| Thu, 19 Apr 2018 14:35:59 +0100 |
Chris Cannam |
Make the overlays at either end translucent, so they don't completely crop out any underlying text or necessary info (e.g. selection extents)
|
| Tue, 17 Apr 2018 10:47:38 +0100 |
Lucas Thompson |
Formatting changes to align more with SV style conventions
|
| Tue, 17 Apr 2018 10:47:14 +0100 |
Lucas Thompson |
Accept optional modality in constructor and fix subsequent possible side effect (re-opening dialog when just cancelled)
|
| Thu, 01 Mar 2018 18:02:22 +0000 |
Chris Cannam |
Untabify
|
| Thu, 01 Mar 2018 14:43:53 +0000 |
Chris Cannam |
Convert some cerrs to SVCERRs. Apart from anything else, this makes MSVC2017 happy
|
| Tue, 12 Dec 2017 11:19:15 +0000 |
Chris Cannam |
This was new in GCC 7
|
| Thu, 07 Dec 2017 13:31:32 +0000 |
Chris Cannam |
Add fallthrough attribute
|
| Tue, 18 Jul 2017 15:11:49 +0100 |
Chris Cannam |
Fix loading of should-not-auto-invert scalable icons
|
| Mon, 10 Jul 2017 14:24:25 +0100 |
Chris Cannam |
Merge from branch "scale-ticks"
|
| Thu, 04 May 2017 15:42:40 +0100 |
Chris Cannam |
Make use of ScaleTickIntervals in log scale as well
scale-ticks
|
| Thu, 04 May 2017 15:37:43 +0100 |
Chris Cannam |
Rework log scale calculation, update to changed interface
scale-ticks
|
| Thu, 04 May 2017 10:24:23 +0100 |
Chris Cannam |
Make use of ScaleTickIntervals in linear numerical scale (not log yet)
scale-ticks
|
| Sun, 12 Mar 2017 13:37:01 +0000 |
Chris Cannam |
Remove debug out
|
| Tue, 07 Mar 2017 18:54:15 +0000 |
Chris Cannam |
Make some corrections to crosshair (measure cursor) positioning and feature descriptions. Needs review.
|
| Tue, 07 Mar 2017 18:39:37 +0000 |
Chris Cannam |
Fix crash when changing window size in the spectrum layer
|
| Tue, 28 Feb 2017 16:42:52 +0000 |
Chris Cannam |
Fix failure to respect saved linear-scale setting in layer when the model suggests it would prefer log scale
|
| Tue, 28 Feb 2017 16:34:59 +0000 |
Chris Cannam |
Restrict colour 3d plot log scale range to 10 orders of magnitude
|
| Tue, 28 Feb 2017 16:34:01 +0000 |
Chris Cannam |
Fix attribute name -- it's colourScale in the spectrogram, but it's just scale here
|
| Tue, 28 Feb 2017 14:47:13 +0000 |
Chris Cannam |
Fix a couple of compiler warnings
|
| Tue, 28 Feb 2017 14:33:31 +0000 |
Chris Cannam |
Emit
|
| Tue, 28 Feb 2017 14:20:56 +0000 |
Chris Cannam |
Ctrl-click, and middle-button click, on level-pan widget reset to default (not implemented yet for level-pan tool button though)
|
| Tue, 28 Feb 2017 14:07:47 +0000 |
Chris Cannam |
Explanatory comment
|
| Tue, 28 Feb 2017 14:07:34 +0000 |
Chris Cannam |
Ensure threshold is equal to minValue; default of 0 is inadequate when minValue < 0 (fixes bug that made all negative values appear black)
|
| Tue, 28 Feb 2017 14:06:49 +0000 |
Chris Cannam |
Remove unused function
|
| Tue, 28 Feb 2017 14:06:24 +0000 |
Chris Cannam |
Use Range01 normalisation in Colour 3D Plot. This gives us the same column normalisation behaviour as in 2.5 (better than the Max1 option).
|
| Thu, 23 Feb 2017 09:22:56 +0000 |
Chris Cannam |
Debug notes, tidying
|
| Wed, 22 Feb 2017 12:04:07 +0000 |
Chris Cannam |
Merge
|
| Wed, 22 Feb 2017 12:01:39 +0000 |
Chris Cannam |
Fix various "model deleted with no aboutToDelete notification" warnings (and one associated potential memory leak)
|
| Wed, 22 Feb 2017 11:19:51 +0000 |
Chris Cannam |
Overrides
|
| Wed, 22 Feb 2017 09:53:58 +0000 |
Chris Cannam |
Add activity log output to debug log too
|
| Tue, 21 Feb 2017 11:12:07 +0000 |
Chris Cannam |
Fix #1792 measure tool crosshairs rendered in wrong colour. Also extend crosshairs over the no-man's-land at the left
|
| Tue, 07 Feb 2017 14:55:19 +0000 |
Chris Cannam |
Some work to make spectrum layers (and slice layers generally) zoomable in the frequency axis. Also fixes a number of view id mixups in SliceLayer which broke offset calculations for the x axis scale.
|
| Fri, 27 Jan 2017 13:19:21 +0000 |
Chris Cannam |
More tweaks to when to render from the middle
|
| Fri, 27 Jan 2017 11:57:48 +0000 |
Chris Cannam |
Looks like we can be a bit more relaxed here
|
| Fri, 27 Jan 2017 11:39:42 +0000 |
Chris Cannam |
Wire up normalise-visible-area mode in colour 3d plot
|
| Fri, 27 Jan 2017 11:39:29 +0000 |
Chris Cannam |
Untabify
|
| Thu, 26 Jan 2017 21:19:49 +0000 |
Chris Cannam |
Scale pen, place line ends in centres of bins, default to line mode
|
| Thu, 26 Jan 2017 21:18:55 +0000 |
Chris Cannam |
Move this function into cpp file
|
| Thu, 26 Jan 2017 21:18:28 +0000 |
Chris Cannam |
Scale piano keyboard height according to text size
|
| Thu, 26 Jan 2017 21:17:59 +0000 |
Chris Cannam |
Fix silly definition that prevented spectrum scale from appearing
|
| Thu, 26 Jan 2017 21:17:36 +0000 |
Chris Cannam |
Scale pens
|
| Thu, 26 Jan 2017 21:17:19 +0000 |
Chris Cannam |
Add method to scale pen widths for hi-res screens
|
| Thu, 26 Jan 2017 21:16:46 +0000 |
Chris Cannam |
Guard only
|
| Thu, 26 Jan 2017 21:16:37 +0000 |
Chris Cannam |
Scale pen used for centre line
|
| Thu, 26 Jan 2017 21:15:36 +0000 |
Chris Cannam |
Guard only
|
| Thu, 26 Jan 2017 21:15:27 +0000 |
Chris Cannam |
Minor debug
|
| Thu, 26 Jan 2017 21:15:20 +0000 |
Chris Cannam |
Switch widget type to one that gets mouseover notifications
|
| Thu, 26 Jan 2017 12:04:03 +0000 |
Chris Cannam |
Randomise start offset for partial paints, it looks (I think) a little better
|
| Thu, 26 Jan 2017 11:55:11 +0000 |
Chris Cannam |
Measure time taken to render per pixel, and use the time last time around to decide whether to be time constrained this time around
|
| Thu, 26 Jan 2017 10:41:50 +0000 |
Chris Cannam |
Fix #1781 Running CQ Chromagram spits out stacks of "bin index out of range" warnings
|
| Mon, 16 Jan 2017 10:00:19 +0000 |
Chris Cannam |
Fix incorrect call to getColumn() that broke the peak-frequency spectrogram and close zoom levels of the colour 3d plot
|
| Fri, 13 Jan 2017 15:44:39 +0000 |
Chris Cannam |
Debug toward tracking down strange peak-frequency spectrogram update problem
|
| Fri, 13 Jan 2017 15:37:07 +0000 |
Chris Cannam |
Make getPreferredPeakCache check the render mode itself
|
| Fri, 13 Jan 2017 10:29:50 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
|
| Fri, 13 Jan 2017 10:22:04 +0000 |
Chris Cannam |
Fix memory leak of cache pixmaps in View
3.0-integration
|
| Thu, 05 Jan 2017 14:30:49 +0000 |
Chris Cannam |
More cache hit counts; make debug output from colour 3d plot renderer (even though it is to SVDEBUG) appear only with explicit debug flag
3.0-integration
|
| Thu, 05 Jan 2017 14:17:47 +0000 |
Chris Cannam |
Don't start in the middle when repainting the whole width while using a peak cache. It looks funny.
3.0-integration
|
| Thu, 05 Jan 2017 14:02:54 +0000 |
Chris Cannam |
Make the colour 3d plot renderer able to support more than one level of peak cache; introduce a second "peak" cache for the spectrogram layer that actually has a 1-1 column relationship with the underlying FFT model, and use it in addition to the existing peak cache if memory is plentiful. Makes spectrograms appear much faster in many common situations.
3.0-integration
|
| Thu, 05 Jan 2017 11:10:57 +0000 |
Chris Cannam |
Recreate FFT model when something changes, not the next time it's requested (avoids extra work when only retrieving the model)
3.0-integration
|
| Wed, 04 Jan 2017 16:03:12 +0000 |
Chris Cannam |
Wire up record monitoring
3.0-integration
|
| Tue, 03 Jan 2017 16:23:11 +0000 |
Chris Cannam |
Provisionally add labels for normalisation menu (sigh)
3.0-integration
|
| Tue, 03 Jan 2017 16:14:59 +0000 |
Chris Cannam |
Add help icon, + update subrepo
3.0-integration
|
| Tue, 03 Jan 2017 15:14:31 +0000 |
Chris Cannam |
Comment some debug output
3.0-integration
|
| Tue, 03 Jan 2017 11:55:29 +0000 |
Chris Cannam |
Fix some compiler warnings
3.0-integration
|
| Tue, 20 Dec 2016 11:53:14 +0000 |
Chris Cannam |
Fix erroneous use of single-colour setting to determine dark/light background when in segmentation mode
3.0-integration
|
| Tue, 20 Dec 2016 10:49:24 +0000 |
Chris Cannam |
Further PropertyBox layout overhaul: avoid crash (/ assertion failure) when property type changes from e.g. colour to colourmap, by replacing the existing widget within the layout rather than trying to repopulate it
3.0-integration
|
| Mon, 19 Dec 2016 16:34:38 +0000 |
Chris Cannam |
Merge from branch svg, and thus (in some subrepos) from levelpanwidget
3.0-integration
|
| Mon, 19 Dec 2016 16:32:34 +0000 |
Chris Cannam |
Implement "Export SVG file..."
svg
|
| Fri, 16 Dec 2016 19:35:57 +0000 |
Chris Cannam |
Fix incorrect initial display levels in LevelPanWidget
levelpanwidget
|
| Fri, 16 Dec 2016 16:29:53 +0000 |
Chris Cannam |
Support mouse wheel on level-pan tool button
levelpanwidget
|
| Fri, 16 Dec 2016 15:55:59 +0000 |
Chris Cannam |
Add swatches to colour map combo (optionally, as it turns out they are quite visually distracting)
levelpanwidget
|
| Fri, 16 Dec 2016 14:16:05 +0000 |
Chris Cannam |
Introduce a colour map combo too. Doesn't yet have swatches
levelpanwidget
|
| Fri, 16 Dec 2016 13:10:21 +0000 |
Chris Cannam |
Take advantage of the fact that a group layout is now always used, to simplify code
levelpanwidget
|
| Fri, 16 Dec 2016 13:08:33 +0000 |
Chris Cannam |
Introduce colour combobox class, to replace ad-hoc code in property box
levelpanwidget
|
| Thu, 15 Dec 2016 16:29:27 +0000 |
Chris Cannam |
Adjust spacing in property box
levelpanwidget
|
| Thu, 15 Dec 2016 16:29:18 +0000 |
Chris Cannam |
Record scale factor in log
levelpanwidget
|
| Thu, 15 Dec 2016 15:34:33 +0000 |
Chris Cannam |
Some adjustments to make view elements clearer and more correctly sized, especially on hidpi (non-pixel-doubling) systems
levelpanwidget
|
| Thu, 15 Dec 2016 15:12:44 +0000 |
Chris Cannam |
Retina thumbwheels
levelpanwidget
|
| Thu, 15 Dec 2016 14:39:52 +0000 |
Chris Cannam |
Tool tips
levelpanwidget
|
| Thu, 15 Dec 2016 14:39:40 +0000 |
Chris Cannam |
An attempt to improve PropertyBox layout on the Mac. Make all rows consistent by always creating a group layout for each row, regardless of whether the item(s) in it are marked as grouped or not.
levelpanwidget
|
| Thu, 15 Dec 2016 11:54:12 +0000 |
Chris Cannam |
Make play params area of property box look a bit better on OSX
levelpanwidget
|
| Thu, 15 Dec 2016 11:53:52 +0000 |
Chris Cannam |
As NotifyingPushButton, but a ToolButton
levelpanwidget
|
| Thu, 15 Dec 2016 10:36:41 +0000 |
Chris Cannam |
Moving around some UI bits
levelpanwidget
|
| Wed, 14 Dec 2016 14:28:41 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
levelpanwidget
|
| Wed, 14 Dec 2016 11:56:47 +0000 |
Chris Cannam |
Minor debug tweaks
3.0-integration
|
| Tue, 13 Dec 2016 16:23:48 +0000 |
Chris Cannam |
Fix some compiler problems
3.0-integration
|
| Mon, 12 Dec 2016 15:18:52 +0000 |
Chris Cannam |
Some hackery toward having a zoomlevel type
zoom
|
| Fri, 09 Dec 2016 18:01:55 +0000 |
Chris Cannam |
Merge from branch bqresample
3.0-integration
|
| Fri, 09 Dec 2016 14:40:49 +0000 |
Chris Cannam |
Fixes to sample rate and latency handling
bqresample
|
| Tue, 06 Dec 2016 09:47:27 +0000 |
Chris Cannam |
Some work on play parameters and level controls in property box
levelpanwidget
|
| Tue, 06 Dec 2016 09:20:10 +0000 |
Chris Cannam |
Switch to level-pan tool button in property box
levelpanwidget
|
| Mon, 05 Dec 2016 17:13:01 +0000 |
Chris Cannam |
Introduce level-pan widget to property box
levelpanwidget
|
| Mon, 05 Dec 2016 15:47:32 +0000 |
Chris Cannam |
Add monitoring to level-pan widget (though not well, yet)
levelpanwidget
|
| Mon, 05 Dec 2016 14:51:25 +0000 |
Chris Cannam |
Another use of WidgetScale
more-hidpi
|
| Mon, 05 Dec 2016 14:31:53 +0000 |
Chris Cannam |
Some icon updates
more-hidpi
|
| Mon, 05 Dec 2016 12:04:23 +0000 |
Chris Cannam |
Scale the sizes of a few more UI elements
more-hidpi
|
| Wed, 30 Nov 2016 11:01:39 +0000 |
Chris Cannam |
Bigger colour swatches for bigger fonts
3.0-integration
|
| Wed, 30 Nov 2016 10:54:16 +0000 |
Chris Cannam |
Always accept wheel events
3.0-integration
|
| Mon, 28 Nov 2016 14:39:59 +0000 |
Chris Cannam |
More debug
3.0-integration
|
| Wed, 23 Nov 2016 10:39:32 +0000 |
Chris Cannam |
Avoid rounding error giving too few bins in column request
3.0-integration
|
| Mon, 21 Nov 2016 15:33:08 +0000 |
Chris Cannam |
Merge from branch bqfft
3.0-integration
|
| Mon, 21 Nov 2016 15:05:57 +0000 |
Chris Cannam |
Branch to use bqfft code and remove FFTapi
bqfft
|
| Thu, 17 Nov 2016 17:47:10 +0000 |
Chris Cannam |
Backed out changeset d89e04b0eff3, thus un-backing-out changeset c036560a7205!
3.0-integration
|
| Thu, 17 Nov 2016 11:48:59 +0000 |
Chris Cannam |
Backed out changeset c036560a7205
3.0-integration
|
| Thu, 17 Nov 2016 11:48:42 +0000 |
Chris Cannam |
Introduce our own scaleDrawBufferImage (though I think we probably won't actually want to use this, so I expect to back it out again)
3.0-integration
|
| Thu, 10 Nov 2016 09:58:28 +0000 |
Chris Cannam |
More timings and cache hit counts
3.0-integration
|
| Tue, 08 Nov 2016 14:55:53 +0000 |
Chris Cannam |
Use peak cache at one zoom level lower (since it exists at that level already -- this is a >= vs > question) + make naming more uniform
3.0-integration
|
| Fri, 04 Nov 2016 16:44:59 +0000 |
Chris Cannam |
Fix omitted topmost bin
3.0-integration
|
| Fri, 04 Nov 2016 16:32:41 +0000 |
Chris Cannam |
Fix forehead-slapping failure to use the right model when rendering 3d plot in peaks cache mode (i.e. when zoomed quite far out)
3.0-integration
|
| Thu, 03 Nov 2016 14:57:00 +0000 |
Chris Cannam |
Make SVDEBUG always write to a log file -- formerly this was disabled in NDEBUG builds. I think there's little use to that, it just means that we keep adding more cerr debug output because we aren't getting the log we need. And SVDEBUG logging is not usually used in tight loops, I don't think the performance overhead is too serious.
3.0-integration
|
| Fri, 28 Oct 2016 15:20:58 +0100 |
Chris Cannam |
Merge from branch piper
3.0-integration
|
| Tue, 25 Oct 2016 15:32:41 +0100 |
Chris Cannam |
Tidying
project-file-rework
|
| Tue, 25 Oct 2016 15:29:01 +0100 |
Chris Cannam |
Minor build updates
project-file-rework
|
| Tue, 25 Oct 2016 11:04:50 +0100 |
Chris Cannam |
Merge from branch 3.0-integration
project-file-rework
|
| Mon, 24 Oct 2016 17:53:33 +0100 |
Chris Cannam |
Cut down vastly on the number of config.pri files and places where their contents has to be effectively duplicated without them
project-file-rework
|
| Fri, 21 Oct 2016 14:40:48 +0100 |
Chris Cannam |
Add out-of-process execution to prefs dialog
3.0-integration
|
| Thu, 20 Oct 2016 14:06:05 +0100 |
Chris Cannam |
Fix completely bogus allocation that was only shown up because of a compiler warning for int->float conversion possibly restricting value range!
3.0-integration
|
| Thu, 20 Oct 2016 11:20:27 +0100 |
Chris Cannam |
Merge from branch "msvc2015_64"
3.0-integration
|
| Wed, 19 Oct 2016 09:11:51 +0100 |
Chris Cannam |
Tidy and re-fix for Linux
msvc2015_64
|
| Tue, 18 Oct 2016 15:55:50 +0100 |
Chris Cannam |
MSVC build fixes
msvc2015_64
|
| Tue, 20 Sep 2016 09:16:55 +0100 |
Chris Cannam |
Merge from branch tony-2.0-integration
3.0-integration
|
| Fri, 19 Aug 2016 15:58:57 +0100 |
Chris Cannam |
Merge latest SV 3.0 branch code
tony-2.0-integration
|
| Fri, 05 Aug 2016 17:48:52 +0100 |
Chris Cannam |
Introduce labels in RangeMapper and use them in AudioDial, though only for tooltip at present. Make use of this for spectrogram magic -81dB/-Inf threshold. Also introduce static strings for inf/pi and use where appropriate.
3.0-integration
|
| Fri, 05 Aug 2016 15:05:02 +0100 |
Chris Cannam |
Merge work on unified spectrogram and colour 3d plot caching renderer
3.0-integration
|
| Fri, 05 Aug 2016 14:54:24 +0100 |
Chris Cannam |
Since 1d317e717fe4 we no longer want to fft scale in hybrid mode. (This might also restore compatibility with Tony and prior SV save sessions -- test this.)
spectrogram-minor-refactor
|
| Fri, 05 Aug 2016 14:36:28 +0100 |
Chris Cannam |
Make text labels on vertical scale ticks visible
spectrogram-minor-refactor
|
| Fri, 05 Aug 2016 14:31:16 +0100 |
Chris Cannam |
Fixes to phase display and colour scale for it; tidy up some debug output
spectrogram-minor-refactor
|
| Fri, 05 Aug 2016 14:00:58 +0100 |
Chris Cannam |
Pull out paintDetailedScale
spectrogram-minor-refactor
|
| Fri, 05 Aug 2016 13:48:14 +0100 |
Chris Cannam |
Minor tidy, + go back to opaque-only spectrogram as intended
spectrogram-minor-refactor
|
