graph
- Fix some erroneous uses of reference frame where we intended "above"-view framedefault tip 2020-08-18, by Chris Cannam
- Fix wrongly-written test which made the mapping alignments line up wrongly in some cases where adjacent panes were related (but, because of this test, the alignment view thought they were not)2020-08-18, by Chris Cannam
- Remove line of debug2020-08-14, by Chris Cannam
- Merge2020-07-21, by Chris Cannam
- This function is now C-linkage (with pointers) for simplicity after we pulled it optionally out into a separate DLL2020-07-21, by Chris Cannam
- Where the "below" view represents only a subset of the "above" view, cut off the feature mappings at the outer edges of the "below" view - don't map everything outside this (it would all just map onto the same single points at beginning and end, which is excessive, confusing and not useful)2020-07-02, by Chris Cannam
- Fix potential divide-by-zero (depending on a race elsewhere)2020-06-30, by Chris Cannam
- Merge from branch csv-import-headers2020-06-18, by Chris Cannam
- Support column headers, with user toggle; also distinguish visibly between tab and general whitespace delimiterscsv-import-headers 2020-06-18, by Chris Cannam
- Fix some Qt deprecations2020-06-16, by Chris Cannam
- Profiling point2020-05-14, by Chris Cannam
- It turns out icons are loaded repeatedly when recreating menus, causing an actually appreciable slowdown when some cases. Provide a cache2020-05-14, by Chris Cannam
- Make ImageLayer able to report whether an image format can be opened2020-05-11, by Chris Cannam
- Reduce font size when pane is very thin2020-05-06, by Chris Cannam
- Reduce heights of alignment views if (they are visible and) we are squashed for space2020-05-06, by Chris Cannam
- When asked to render the whole view width, we need to wait for the layers to be ready before we can determine what the width is2020-04-30, by Chris Cannam
- Fix compiler warning2020-04-29, by Chris Cannam
- Debug2020-04-29, by Chris Cannam
- Further removal of Qt 5.6+-only APIs2020-04-29, by Chris Cannam
- This addAction API from Qt 5.6+ is still, unfortunately, too recent for some of our builds2020-04-29, by Chris Cannam
- Complete round-trip name-type conversion for melodic range & peak freq spectrograms (also has the effect of making them creatable from OSC)2020-04-29, by Chris Cannam
- Add list of packs, fix download test logic2020-04-22, by Chris Cannam
- Use Provider structure2020-04-20, by Chris Cannam
- Fixes for mingw2020-04-09, by Chris Cannam
- Add missing include2020-04-09, by Chris Cannam
- Use our base column type2020-04-09, by Chris Cannam
- Merge from branch sensible-delimited-data-strings2020-04-06, by Chris Cannam
- Switch to the StringExport api now found in svcoresensible-delimited-data-strings 2020-04-03, by Chris Cannam
- Merge from branch audio-source-refactor. Mostly handling changes to plugin ownership2020-04-03, by Chris Cannam
- Remove unused variable2020-04-03, by Chris Cannam
- That didn't work well on a machine with a higher scaled-pixel ratio, try this2020-04-03, by Chris Cannam
- Provide context menu in LevelPanToolButton, + a bit of tidying2020-03-31, by Chris Cannam
- Add right-button context menu to panner widget2020-03-30, by Chris Cannam
- Add context menus to property box controls2020-03-27, by Chris Cannam
- Add context menu to Thumbwheel2020-03-27, by Chris Cannam
- Add test for whether presentation name is at default or not2020-03-27, by Chris Cannam
- Add optional context menu to AudioDial2020-03-26, by Chris Cannam
- Factor out the menu titling code formerly in MainWindow2020-03-26, by Chris Cannam
- Add a tab-bar context menu signal to the property stack2020-03-25, by Chris Cannam
- Use shared_ptr for plugin instances throughout; also descriptors are copyableaudio-source-refactor 2020-03-20, by Chris Cannam
- Merge from branch background-mode2020-01-24, by Chris Cannam
- Add optional unset entry to colour combobackground-mode 2020-01-24, by Chris Cannam
- Make nearby-colour matching a bit more sophisticated, with slightly better algorithm (we think?) and ability to insist on dark/light backgroundbackground-mode 2020-01-24, by Chris Cannam
- Pick accent colour from OS theme if appropriatebackground-mode 2020-01-23, by Chris Cannam
- Apply sensible highlight/link coloursbackground-mode 2020-01-23, by Chris Cannam
- More sensible approach to colour setting on Windowsbackground-mode 2020-01-20, by Chris Cannam
- Windows stylesheetbackground-mode 2020-01-17, by Chris Cannam
- Comments and palette adjustments2020-01-17, by Chris Cannam
- Cut this down, we don't need the things we were calculating (also avoid possible null pointer dereference of v)2020-01-15, by Chris Cannam
- Model -> layer, + word wrap2020-01-15, by Chris Cannam
- Clarify comment2020-01-15, by Chris Cannam
- Merge from branch csv-export-dialog2020-01-14, by Chris Cannam
- Add CSV export dialog, + associated supporting changescsv-export-dialog 2020-01-14, by Chris Cannam
- Don't write empty lines2020-01-14, by Chris Cannam
- Merge from branch spectrogram-export2020-01-10, by Chris Cannam
- Add support for a header line on delimited data outputspectrogram-export 2020-01-10, by Chris Cannam
- Add option to export timestamp columnspectrogram-export 2020-01-10, by Chris Cannam
- Use Colour3DPlotExporter in line with SpectrogramLayerspectrogram-export 2020-01-09, by Chris Cannam
- Provide parameters needed for scale and thresholdingspectrogram-export 2020-01-09, by Chris Cannam
- Handle scale factor, needed for all spectrogram export; handle thresholding (using gain/normalisation for threshold calculation) in peak frequency exportspectrogram-export 2020-01-09, by Chris Cannam
- Give timer a parent so as not to leak itspectrogram-export 2020-01-09, by Chris Cannam
- Update in-progress comments onlyspectrogram-export 2020-01-08, by Chris Cannam
- Fix typo in rangespectrogram-export 2020-01-07, by Chris Cannam
- Comment onlyspectrogram-export 2020-01-07, by Chris Cannam
- Handle peaksspectrogram-export 2020-01-07, by Chris Cannam
- Provide export modelspectrogram-export 2020-01-07, by Chris Cannam
- Start work on spectrogram export codespectrogram-export 2020-01-06, by Chris Cannam
- Fix note numbering - ensure stable across whole track (as it used to be, but without scanning all notes in paint in order to do that)2019-11-22, by Chris Cannam
- Merge2019-11-21, by Chris Cannam
- Fixes to NoteLayer, particularly to calculation of vertical scale when model unit is not Hz. To avoid inconsistency we now behave as if the unit is always Hz from the point of view of the external API and display, converting at the point where we obtain values from the events themselves. Also various fixes to editing.2019-11-21, by Chris Cannam
- Further replacements of QRect::right() with the right (arf) calculation2019-10-31, by Chris Cannam
- Use x + width() instead of QRect::right(), which doesn't return what we need and leaves us a pixel short; also subtract the resolution from the start frame to avoid scrolling scraggy single-pixel lines when we should be drawing nice fat ones2019-10-31, by Chris Cannam
- Permit getScaleProvidingLayerForUnit to return a dormant layer if there is no visible alternative. This is necessary to avoid the scale disappearing in Tony when the spectrogram is toggled off.2019-10-17, by Chris Cannam
- Pass a y-coord, optionally, to Layer::snapToFeatureFrame. This is necessary for BoxLayer which needs to coordinate its snaps with the box it is highlighting for editing. Then in BoxLayer, merge getPointToDrag and getLocalPoints into a single getLocalPoint and use this throughout.2019-10-17, by Chris Cannam
- Update getPointToDrag to prefer boxes that are containing the mouse position in height as well as width2019-10-17, by Chris Cannam
- Make audio dial more visible in Mac dark mode2019-10-16, by Chris Cannam
- Return true from getValueExtents always, just with no unit in the case where we don't have a nice neat scale. This should preserve the property of preventing other layers auto-aligning to us, while also ensuring we don't get overlooked for the purposes of drawing our own scale in a situation where a scale-less layer is on top of us2019-10-16, by Chris Cannam
- Debug output2019-10-16, by Chris Cannam
- Overhaul the way WaveformLayer reports value and display extents. The previous logic has been nonsense for a very long time, excused only by the fact that it was very seldom relevant (only really if another layer with unit V came along that wanted to auto-align with it). Partial fix for #1954 Peculiar alignment for Amplitude Follower y-scale in Auto-Align mode2019-10-16, by Chris Cannam
- Fix getScaleProvidingLayerForUnit to make it only return a layer that actually has display extents. Modify getVisibleExtentsForUnit to make it more like the behaviour in 3.x: where no layer with display extents is found, use the union of the value extents of layers with the right unit. Partial fix for #1954 Peculiar alignment for Amplitude Follower y-scale in Auto-Align mode.2019-10-16, by Chris Cannam
- Debug output tweaks2019-10-16, by Chris Cannam
- Overhaul choice of layer to show scale, in Pane::drawVerticalScale, making it call out to the same logic used by View::getVisibleExtentsForUnit when appropriate. Also refuse to accept scale from dormant top layer.2019-10-15, by Chris Cannam
- Avoid compiler warning2019-10-15, by Chris Cannam
- Clarify naming of some view-related methods. Rename LayerGeometryProvider::getValueExtents to getVisibleExtentsForUnit, and View::getTextLabelHeight to getTextLabelYCoord. Add View::getVisibleExtentsForAnyUnit to be used to determine which unit to adopt in a new e.g. box layer.2019-10-15, by Chris Cannam
- Fix #1951 Selecting row in data editor with multiple items having same frame always selects the first2019-10-15, by Chris Cannam
- Tidy / debug2019-10-14, by Chris Cannam
- Fix #1904 Scrolling colour 3d plot does not always work when in View normalisation mode. We shouldn't imagine we've just invalidated the cache if the truth is that we've only just created the renderer2019-10-09, by Chris Cannam
- Fix failure to apply new frame when pasting events2019-10-09, by Chris Cannam
- Further light streamlining2019-10-09, by Chris Cannam
- Slightly streamline image scaling2019-10-09, by Chris Cannam
- Don't create alignment views at all if not requested (now that the request is made only at construction time)2019-10-07, by Chris Cannam
- Fix alignment of property box when switching back on after having been hidden2019-10-07, by Chris Cannam
- Fix compiler warning2019-10-07, by Chris Cannam
- Fix goof2019-10-04, by Chris Cannam
- Rework PaneStack so that the options that generally aren't (or can't be) changed after construction are supplied to the constructor instead of being set through setter methods.2019-10-04, by Chris Cannam
- Debug bits2019-10-04, by Chris Cannam
- Merge2019-09-25, by Chris Cannam
- Make the waveform layer do the expected thing when MergeChannels mode (i.e. butterfly mode) is enabled even if there is only 1 channel. This combination isn't actually available in the UI for SV, but it's useful for Sonic Lineup.2019-09-25, by Chris Cannam
- Merge from branch time-frequency-boxes2019-09-25, by Chris Cannam
- With duration and two values, propose a box model (value and extent)time-frequency-boxes 2019-09-25, by Chris Cannam
- Tidyingtime-frequency-boxes 2019-09-25, by Chris Cannam
- Make getTopLayerDisplayExtents public (ugh) for use when setting up a new empty layer with auto-align over the top of another onetime-frequency-boxes 2019-09-25, by Chris Cannam
- Rename TimeFrequencyBoxLayer to just BoxLayer, supporting vertical scales other than Hztime-frequency-boxes 2019-09-25, by Chris Cannam
- Fix confusion about capture scope with MSVCtime-frequency-boxes 2019-09-21, by Chris Cannam
- This is what the icon is actually calledtime-frequency-boxes 2019-09-20, by Chris Cannam
- Item-editing updates needed for time-frequency box layertime-frequency-boxes 2019-09-20, by Chris Cannam
- Fixes to drag and paint in time-freq box layertime-frequency-boxes 2019-09-20, by Chris Cannam
- Shorten name (Boxes -> Box)time-frequency-boxes 2019-09-20, by Chris Cannam
- Add TimeFrequencyBoxes to layer factorytime-frequency-boxes 2019-09-19, by Chris Cannam
- Introduce time-frequency box layertime-frequency-boxes 2019-09-19, by Chris Cannam
- Merge2019-09-17, by Chris Cannam
- The default key frame map is not working well at the moment, because its extents are not being properly updated as the models they depend on are loaded. Leave it empty for now.2019-09-17, by Chris Cannam
- Comment2019-09-16, by Chris Cannam
- Fix, I think, #1914 Mounting rounding error when dragging aligned view left/right - and therefore the associated #1874 Pointer position becomes increasingly erroneous when rewinding with alignment active2019-09-13, by Chris Cannam
- Debug updates2019-09-13, by Chris Cannam
- Debug changes2019-09-13, by Chris Cannam
- Only set maximum frequency on FFT model when in a special verticallyFixed mode2019-09-12, by Chris Cannam
- Set maximum frequency on FFT model to reduce cache size (experimental)2019-09-12, by Chris Cannam
- Pass the cache pointer through rather than looking it up afresh from the model id for each column2019-09-12, by Chris Cannam
- Generate peak cache directly from model, not from whole-model cache (which turns out to be very slow for large models)2019-09-11, by Chris Cannam
- More debug bits2019-09-11, by Chris Cannam
- Debug concerns2019-09-10, by Chris Cannam
- Indentation2019-09-04, by Chris Cannam
- Show relative pitch if recorded2019-08-15, by Chris Cannam
- Separate out handling of alignment progress bar from the layer progress bars and fix tendency to have them hanging around even when alignment has completed2019-08-14, by Chris Cannam
- Toward trying to figure out a progress-bar problem2019-08-13, by Chris Cannam
- Ensure rightCropFrame doesn't end up rounded to the left of the desired end pixel2019-08-13, by Chris Cannam
- Improve drawn alignment of lines in AlignmentView against the view below; also cache the mapping locations2019-08-09, by Chris Cannam
- Debug2019-08-08, by Chris Cannam
- Fix overlooked alignment2019-08-08, by Chris Cannam
- Attempt a mechanism for the View to time-align a layer on display using an aligning version of the ViewProxy2019-08-02, by Chris Cannam
- Add direct method to get source model2019-08-02, by Chris Cannam
- Correct erroneous signal signature2019-07-19, by Chris Cannam
- Fix failure to show alignment progress bar2019-07-18, by Chris Cannam
- Merge from branch by-id2019-07-17, by Chris Cannam
- Tidy; also don't show cancel buttons for alignmentsby-id 2019-07-17, by Chris Cannam
- Fix inability to set layer's model to Noneby-id 2019-07-17, by Chris Cannam
- Emit a signal when a cancel is pressedby-id 2019-07-15, by Chris Cannam
- Commentby-id 2019-07-12, by Chris Cannam
- Update for removal of (public) getId from Modelby-id 2019-07-05, by Chris Cannam
- Update for changes to PlayParametersby-id 2019-07-04, by Chris Cannam
- Further ModelId updatesby-id 2019-07-03, by Chris Cannam
- Fix a number of Qt deprecation warningsby-id 2019-07-03, by Chris Cannam
- Further ModelId updatesby-id 2019-07-02, by Chris Cannam
- Couple more updatesby-id 2019-07-02, by Chris Cannam
- Further layer updatesby-id 2019-07-02, by Chris Cannam
- Further layer updates for ModelByIdby-id 2019-07-02, by Chris Cannam
- Further layer updates for ModelByIdby-id 2019-07-02, by Chris Cannam
- Further layer updatesby-id 2019-07-01, by Chris Cannam
- More layer updatesby-id 2019-07-01, by Chris Cannam
- Further layer updates for ByIdby-id 2019-06-28, by Chris Cannam
- Some work on updating layers for ModelId bitsby-id 2019-06-27, by Chris Cannam
- Add opportunistic-editing toggle2019-06-13, by Chris Cannam
- Don't try to draw scale from a dormant layer!2019-06-13, by Chris Cannam
- Merge2019-05-24, by Chris Cannam
- Don't attempt performance alignment when not in align mode2019-05-24, by Chris Cannam
- Fix incorrect frequency display in peak-freq mode2019-05-24, by Chris Cannam
- Branch3.3-stable 2019-05-22, by Chris Cannam
- Fix incorrect visibility of alignment view when not requested; fix current indicator size when x-button is disabled2019-05-20, by Chris Cannam
- Fix incorrect repaint at left edge in segmentation mode2019-05-20, by Chris Cannam
- Add option to suppress close button on first pane2019-05-17, by Chris Cannam
- Merge from branch single-point2019-05-17, by Chris Cannam
- Make it possible to disable cancel buttonssingle-point 2019-05-16, by Chris Cannam
- Avoid showing progress bars for dormant layers. They'll typically be duplicates, e.g. in the vect app you can get many dormant layers all reporting the alignment completion at the same time. (Maybe it would be better just to reject progress bars for alignment in dormant layers? Hm)single-point 2019-05-16, by Chris Cannam
- Commentsingle-point 2019-05-10, by Chris Cannam
- Add setLayerProperties (from XML string)single-point 2019-05-10, by Chris Cannam
- Remove margin from inner framesingle-point 2019-05-10, by Chris Cannam
- Smoother cache & colour management in colour 3d plotssingle-point 2019-05-09, by Chris Cannam
- Make inversion configurable in settingssingle-point 2019-05-03, by Chris Cannam
- When invalidating cache in a time-constrained context, don't start rendering in the same cycle as well - leave it for a further update. Slightly experimental effort to make the UI feel more responsive.single-point 2019-05-01, by Chris Cannam
- Tweak peak-cache allocations etc in the hope of making long spectrograms a little faster to re-rendersingle-point 2019-05-01, by Chris Cannam
- Don't discard large wheel deltas; just clamp themsingle-point 2019-05-01, by Chris Cannam
- Some debug bitssingle-point 2019-05-01, by Chris Cannam
- Add option to make pane sizes auto-resize-only (i.e. remove user control via a splitter); also place alignment views above panes instead of below, meaning the extra bit of space that we currently have for the pane without one at least goes to the primary panesingle-point 2019-04-30, by Chris Cannam
- Shrink alignment panes to sensible size on non-hi-dpi screenssingle-point 2019-04-30, by Chris Cannam
- Add getNearbyColourIndex to ColourDatabase; tweak getContrastingColour for bright colours; add commentssingle-point 2019-04-30, by Chris Cannam
- Avoid showing final (useless) alignment viewsingle-point 2019-04-25, by Chris Cannam
- Make AudioDial a bit more visible with a dark backgroundsingle-point 2019-04-24, by Chris Cannam
- Merge from default branchsingle-point 2019-04-24, by Chris Cannam
- Comment2019-04-24, by Chris Cannam
- Add function to request multiple filenames2019-04-23, by Chris Cannam
- Update to using export IDs stored in XmlExportablessingle-point 2019-03-28, by Chris Cannam
- Use updated ImageModelsingle-point 2019-03-22, by Chris Cannam
- Use updated TextModelsingle-point 2019-03-22, by Chris Cannam
- Fix tendency of start position of measure rect to wander as you drag out the rect (at certain zoom resolutions)single-point 2019-03-21, by Chris Cannam
- Merge2019-03-21, by Chris Cannam
- Fix tendency of start position of measure rect to wander as you drag out the rec2019-03-21, by Chris Cannam
- Updates for SparseOneDimensionalModel in new APIsingle-point 2019-03-21, by Chris Cannam
- Further snap fixessingle-point 2019-03-20, by Chris Cannam
- Begin fixing the various snap operations. Also remove SnapNearest, which is never used and seems to consume more lines of code than the rest!single-point 2019-03-20, by Chris Cannam
- Use overspill to render time-value point line properly at edgessingle-point 2019-03-20, by Chris Cannam
- Update TimeValueLayer etcsingle-point 2019-03-19, by Chris Cannam
- Update RegionLayer to updated RegionModelsingle-point 2019-03-15, by Chris Cannam
- Update to use external set of commandssingle-point 2019-03-15, by Chris Cannam
- Update following FlexiNoteModel removal, using new NoteModel API where flexi was previously usedsingle-point 2019-03-14, by Chris Cannam
- Finish updating NoteLayer to single-point APIsingle-point 2019-03-14, by Chris Cannam
- Toward getting NoteLayer to work with single-point APIssingle-point 2019-03-13, by Chris Cannam
- Update to Event api in place of Clipboard pointssingle-point 2019-03-08, by Chris Cannam
- Keep the point being edited highlighted while the edit dialog is open2019-03-05, by Chris Cannam
- Fix inadvertent hardcoding of SV file extension2019-02-18, by Chris Cannam
- Merge2019-02-14, by Chris Cannam
- Comments2019-02-14, by Chris Cannam
- Use zero-width pen when zoomed out - this seems to make a huge difference to speed when rendering on top of another layer, for some reason2019-02-14, by Chris Cannam
- Merge2019-01-23, by Chris Cannam
- Fix potential divide-by-zero2019-01-21, by Chris Cannam
- Avoid compiler warning2019-01-21, by Chris Cannam
- Merge from branch fix-static-analysis2019-01-09, by Chris Cannam
- Support changing the separator (if more than one plausible one is found) and repopulating the dialog2019-01-09, by Chris Cannam
- Debug tweaks2018-12-19, by Chris Cannam
- Sample a column only if it is set (avoids flash of mis-ranged material when scrolling with view normalisation on)2018-12-19, by Chris Cannam
- Merge from default branchfix-static-analysis 2018-12-04, by Chris Cannam
- Fix erasing of Region layer labels as the playhead moves over them2018-11-29, by Chris Cannam
- Use nullptr throughoutfix-static-analysis 2018-11-26, by Chris Cannam
- Header guardsfix-static-analysis 2018-11-26, by Chris Cannam
- Use override throughoutfix-static-analysis 2018-11-26, by Chris Cannam
- Fixes from clang modernize-use-overridefix-static-analysis 2018-11-22, by Chris Cannam
- Make horizontal wheeling a bit less crazily fast in the absence of fine delta information2018-11-16, by Chris Cannam
- Retain consistent min freq (rather than min bin no) when changing fft parameters in spectrum; scale ffts by window size rather than fft size in case of oversampling, to avoid fading out because of scale factor including zero padding2018-11-15, by Chris Cannam
- Handle integer pixel scaling as well2018-11-15, by Chris Cannam
- Scale pen for retina display on macOS as well as for hidpi display elsewhere2018-11-15, by Chris Cannam
- Different approach to x-coord calculation in slice layer - let's acknowledge that we really do have two different types of model, those whose "bins" are actually at a single value (frequency in the case of the spectrum) and those whose bins are just labels.2018-11-15, by Chris Cannam
- Fixes to spectrum axis calculations, + default to starting at bin 12018-11-14, by Chris Cannam
- We need to draw illumination label *after* the spectrum...2018-11-14, by Chris Cannam
- Fix some incorrect pixel scaling2018-11-14, by Chris Cannam
- Fix compiler warning2018-11-14, by Chris Cannam
- Merge from branch spectrogramparam2018-11-14, by Chris Cannam
- Various tweaks & fixes to log-scale handling in spectrum. We can't easily preserve the nice behaviour where peaks stay in place as fft size changes, without potentially losing a bit of low-frequency informationspectrogramparam 2018-11-14, by Chris Cannam
- Correct positioning for centre line when antialiasing with non-0-width penspectrogramparam 2018-11-14, by Chris Cannam
- Highlight the current peak line in the spectrum (when shown); also a fix to the crosshair labellingspectrogramparam 2018-11-14, by Chris Cannam
- Toward highlighting peaks on spectrumspectrogramparam 2018-11-13, by Chris Cannam
- Move layer name text up a bit when rendering on a layer with a horizontal scale (i.e. spectrum)spectrogramparam 2018-11-13, by Chris Cannam
- Make "zoom to region" work sensibly for slice/spectrum layers; ensure that min/max bin are remapped properly when changing fft sizespectrogramparam 2018-11-13, by Chris Cannam
- Make mention of the shift-drag feature and zooming in the status textspectrogramparam 2018-11-13, by Chris Cannam
- Small speedupsspectrogramparam 2018-11-12, by Chris Cannam
- Use log-frequency rather than log-bin for calculating x coord in spectrum. This has the advantage that frequency positions don't move when we change the window size or oversampling ratio, but it does give us an unhelpfully large amount of space for very low frequencies - to be consideredspectrogramparam 2018-11-12, by Chris Cannam
- Retrieve only the values already determined to be peaksspectrogramparam 2018-11-08, by Chris Cannam
- Fix "colour" rendering for spectrum (now resembles a filled "line" mode rather than a filled "block" mode)spectrogramparam 2018-11-08, by Chris Cannam
- Switch spectrum to antialiased drawing with considerable speedup for the dense areas; take horizontal scale height into account when rendering slice layer heightspectrogramparam 2018-11-07, by Chris Cannam
- Add oversampling option to spectrum as wellspectrogramparam 2018-11-07, by Chris Cannam
- Merge from default branchspectrogramparam 2018-11-06, by Chris Cannam
- Make the context help for custom controls explain how to reset them2018-11-06, by Chris Cannam
- Experimental oversampling paramspectrogramparam 2018-11-06, by Chris Cannam
- Avoid nan/inf values (and consequent crash) in colour scale range2018-11-06, by Chris Cannam
- Use label of property for tooltip, not just id of it2018-11-06, by Chris Cannam
- Merge from branch zoom2018-11-06, by Chris Cannam
- Fix incorrect start/end overlay drawing when zoomed far inzoom 2018-11-06, by Chris Cannam
- Merge from default branchzoom 2018-11-06, by Chris Cannam
- Scaling tweaks2018-11-05, by Chris Cannam
- Short-circuit drawing a little bit for contiguous ranges2018-11-02, by Chris Cannam
- Progressively increase sample-box size slightly2018-11-02, by Chris Cannam
- Initialise level and pan from current state of layer's parameters (e.g. when reloading session)waverevision 2018-11-01, by Chris Cannam
- Use a distinguishable text for this statewaverevision 2018-11-01, by Chris Cannam
- Merge branch waverevision2018-11-01, by Chris Cannam
- Rework waveform renderer to use smooth paths, aiming to get near-pixel-identical results when zoomed out far enough for a single path not to be relevantwaverevision 2018-10-31, by Chris Cannam
- Fix the mix/merge channels behaviour in pixels-per-frame zone2018-10-30, by Chris Cannam
- Minor tidying2018-10-30, by Chris Cannam
- Add show-derivative option but, like inverting the colour scale, I don't think it's as useful as I'd hoped2018-10-30, by Chris Cannam
- Fix inconsistency between centre frame actually set and centre frame notified as set, which caused the start frame location to creep out of place gradually as you page through2018-10-30, by Chris Cannam
- Add mechanism for saving/loading colour maps by name/id rather than by numerical index, for future compatibility when adding to or changing the supported colour maps. Add two new colour maps (and one old one). Write out backward-compatible numerical indices for use when reloading in older versions. Also add a mechanism to invert the colour map, though I don't think it turns out useful enough to include in the UI.2018-10-18, by Chris Cannam
- Merge2018-10-12, by Chris Cannam
- Merge from default branchzoom 2018-10-05, by Chris Cannam
- Merge2018-10-11, by Chris Cannam
- Oops, typeof is not standard2018-10-11, by Chris Cannam
- Rework cacheing logic to reduce the number of reallocations and be more correct about the repaint areas. I don't expect the difference to be really noticeable but in theory performance should be a little better...2018-10-11, by Chris Cannam
- Fix ugly text positioning/drawing on osx2018-10-11, by Chris Cannam
- Remove some debug bits2018-10-10, by Chris Cannam
- Use zoom constraints more consistently, including the new RelativelyFine one2018-10-10, by Chris Cannam
- Merge from branch zoom2018-10-10, by Chris Cannam
- Debug tweakszoom 2018-10-05, by Chris Cannam
- Scale positioning2018-10-03, by Chris Cannam
- Use newly-introduced cancel icon instead of fileclose. The deceptive name of fileclose had me thinking nobody was using it, so I removed it and the cancel buttons disappeared2018-10-03, by Chris Cannam
- Merge from default branchzoom 2018-10-01, by Chris Cannam
- Avoid blowing up when faced with min==max in parameter range2018-10-01, by Chris Cannam
- Use locale-aware comparators for sorting user-visible strings2018-10-01, by Chris Cannam
- Avoid overflow problems when dealing with large numbers of microsecondszoom 2018-09-28, by Chris Cannam
- Use more precise text rendering when zoomed in beyond the ms levelzoom 2018-09-28, by Chris Cannam
- This is the correct sizezoom 2018-09-28, by Chris Cannam
- Fix crash when scrolling beyond end of waveform (+ fix compiler warnings)zoom 2018-09-27, by Chris Cannam
- Fix stupidityzoom 2018-09-27, by Chris Cannam
- Fixes for TimeRuler spacing and for the boundaries of the WaveformLayer paint areazoom 2018-09-27, by Chris Cannam
- Remove WaveformOversampler again from here; it's now in svcorezoom 2018-09-26, by Chris Cannam
- Add custom waveform oversampler methodzoom 2018-09-26, by Chris Cannam
- Get oversampled rendering almost working, but I think we need to take more care with the oversampling itselfzoom 2018-09-25, by Chris Cannam
- Fix accidental always-auto-normalisezoom 2018-09-25, by Chris Cannam
- Toward oversampling renderingzoom 2018-09-24, by Chris Cannam
- Factor out paintChannelScaleGuideszoom 2018-09-21, by Chris Cannam
- Another tidyzoom 2018-09-21, by Chris Cannam
- A further refactor with range blockszoom 2018-09-21, by Chris Cannam
- Refactor out paintChannelzoom 2018-09-21, by Chris Cannam
- Fix typo that created un-reloadable session filezoom 2018-09-21, by Chris Cannam
- Ensure getFrameForX returns value on zoom blocksize boundary; take advantage of that (this is essentially reverting to the same behaviour as in the default branch, which we should probably have done all along)zoom 2018-09-21, by Chris Cannam
- Responding to a hang due to mismatching zoom and block sizeszoom 2018-09-20, by Chris Cannam
- Avoid compiler warningzoom 2018-09-20, by Chris Cannam
- Further ZoomLevel fixeszoom 2018-09-20, by Chris Cannam
- More ZoomLevel updateszoom 2018-09-20, by Chris Cannam
- Gradual ZoomLevel updateszoom 2018-09-19, by Chris Cannam
- Merge from default branchzoom 2018-09-17, by Chris Cannam
- Merge from branch import-audio-data2018-09-12, by Chris Cannam
- Propose to take only value-like columns as audio samples, not all numeric ones - now that it's easy enough for the user to overruleimport-audio-data 2018-09-12, by Chris Cannam
- Move out these bits which are now in CSVFormatimport-audio-data 2018-09-07, by Chris Cannam
- Sample rangeimport-audio-data 2018-09-06, by Chris Cannam
- Refactor; the two use-cases of CSVFormatDialog were turning out to be different enough to justify two separate classesimport-audio-data 2018-09-06, by Chris Cannam
- Support audio-format CSV format selection in dialogimport-audio-data 2018-09-06, by Chris Cannam
- Merge from default branchimport-audio-data 2018-09-04, by Chris Cannam
- Tidy edges of scale area on Mac2018-08-09, by Chris Cannam
- Ensure scale appears for layer when drawn in AutoAlign mode without any other layer present to align to2018-07-04, by Chris Cannam
- Layers such as time-value layers with ColourDistinguishes property should use the dark background when a bright colour is selected. This is how it was always supposed to work, I think, but I broke it so long ago that this "fix" might itself come across as a surprising breaking change2018-07-04, by Chris Cannam
- Fix compiler warning2018-06-28, by Chris Cannam
- Handle additional caseimport-audio-data 2018-06-28, by Chris Cannam
- Rename guardimport-audio-data 2018-06-28, by Chris Cannam
- Fix compiler warningimport-audio-data 2018-06-28, by Chris Cannam
- Tool button on Mac (something has gone very wrong with the appearance of the push button in latest builds)2018-06-26, by Chris Cannam
- Never scale down2018-06-26, by Chris Cannam
- Improve level-pan rendering quality on non-retina OSX2018-06-26, by Chris Cannam
- Better rendering for widget cells2018-06-25, by Chris Cannam
- Slightly nicer pan handling, avoiding showing spurious >0dB peaks2018-06-25, by Chris Cannam
- Experiment with rounded rects2018-06-22, by Chris Cannam
- Collect the bits of bookkeeping for mouse wheel events, and use in all widgets2018-06-22, by Chris Cannam
- Proper handling for wheel rotation distance2018-06-22, by Chris Cannam
- Half-steps for level in level-pan widget2018-06-21, by Chris Cannam
- Ctrl-click on level-pan tool button now also resets to default2018-06-21, by Chris Cannam
- Merge from branch plugin-path-config2018-06-11, by Chris Cannam
- Fix compiler warningplugin-path-config 2018-06-11, by Chris Cannam
- Minor improvement to (still nasty) button layout on OSXplugin-path-config 2018-06-08, by Chris Cannam
- Use type keys as indices rather than labelsplugin-path-config 2018-06-08, by Chris Cannam
- Fix erroneous tooltipplugin-path-config 2018-06-06, by Chris Cannam
- Show value of environment variable; populate for last plugin type by default (as that happens to be Vamp)plugin-path-config 2018-06-04, by Chris Cannam
- Various logic fixes, and use new setter-class structuresplugin-path-config 2018-05-25, by Chris Cannam
- Plugin review dialogplugin-path-config 2018-05-25, by Chris Cannam
- Add "Add"plugin-path-config 2018-05-23, by Chris Cannam
- More work on plugin path configuration layout &cplugin-path-config 2018-05-23, by Chris Cannam
- Toward more than one plugin type in this widgetplugin-path-config 2018-05-21, by Chris Cannam
- Grey-out meaningless buttonsplugin-path-config 2018-05-15, by Chris Cannam
- Better editing mechanismplugin-path-config 2018-05-15, by Chris Cannam
- Up/downplugin-path-config 2018-05-15, by Chris Cannam
- Toward allowing the user to see (at least, and maybe change) the plugin pathplugin-path-config 2018-05-11, by Chris Cannam
- Hack to ensure vertical scale lines are in the right place in pixel-doubling rendering2018-05-08, by Chris Cannam
- Tidy2018-05-08, by Chris Cannam
- Merge from branch horizontal-scale2018-05-03, by Chris Cannam
- Provide linear horizontal scale in spectrum as well as log; fix bin positioning and colour scale property box updating; ensure proper background colour and visibility of peak lineshorizontal-scale 2018-05-03, by Chris Cannam
- Mergehorizontal-scale 2018-05-02, by Chris Cannam
- Fix positioning of peak lines on spectrum layer (origin is already accounted for in the bin/frequency to x conversion functions)2018-05-02, by Chris Cannam
- Tweaks to horizontal scalehorizontal-scale 2018-05-02, by Chris Cannam
- Draw some tickshorizontal-scale 2018-05-01, by Chris Cannam
- Branch toward adding horizontal numerical scales to thingshorizontal-scale 2018-05-01, by Chris Cannam
- Tidy2018-04-26, by Chris Cannam
- Scale scalable icon2018-04-26, by Chris Cannam
- Adjust y-coord of text labels to accommodate larger scaled fonts2018-04-24, by Chris Cannam
- Delete rows in reverse order for safety2018-04-23, by Chris Cannam
- Avoid crash when scrolling with an empty layer open2018-04-23, by Chris Cannam
- Make selection extents more visible on hi-dpi2018-04-19, by Chris Cannam
- Make the overlays at either end translucent, so they don't completely crop out any underlying text or necessary info (e.g. selection extents)2018-04-19, by Chris Cannam
- Formatting changes to align more with SV style conventions2018-04-17, by Lucas Thompson
- Accept optional modality in constructor and fix subsequent possible side effect (re-opening dialog when just cancelled)2018-04-17, by Lucas Thompson
- Untabify2018-03-01, by Chris Cannam
- Convert some cerrs to SVCERRs. Apart from anything else, this makes MSVC2017 happy2018-03-01, by Chris Cannam
- This was new in GCC 72017-12-12, by Chris Cannam
- Add fallthrough attribute2017-12-07, by Chris Cannam
- Fix loading of should-not-auto-invert scalable icons2017-07-18, by Chris Cannam
- Merge from branch "scale-ticks"2017-07-10, by Chris Cannam
- Make use of ScaleTickIntervals in log scale as wellscale-ticks 2017-05-04, by Chris Cannam
- Rework log scale calculation, update to changed interfacescale-ticks 2017-05-04, by Chris Cannam
- Make use of ScaleTickIntervals in linear numerical scale (not log yet)scale-ticks 2017-05-04, by Chris Cannam
- Remove debug out2017-03-12, by Chris Cannam
- Make some corrections to crosshair (measure cursor) positioning and feature descriptions. Needs review.2017-03-07, by Chris Cannam
- Fix crash when changing window size in the spectrum layer2017-03-07, by Chris Cannam
- Fix failure to respect saved linear-scale setting in layer when the model suggests it would prefer log scale2017-02-28, by Chris Cannam
- Restrict colour 3d plot log scale range to 10 orders of magnitude2017-02-28, by Chris Cannam
- Fix attribute name -- it's colourScale in the spectrogram, but it's just scale here2017-02-28, by Chris Cannam
- Fix a couple of compiler warnings2017-02-28, by Chris Cannam
- Emit2017-02-28, by Chris Cannam
- Ctrl-click, and middle-button click, on level-pan widget reset to default (not implemented yet for level-pan tool button though)2017-02-28, by Chris Cannam
- Explanatory comment2017-02-28, by Chris Cannam
- Ensure threshold is equal to minValue; default of 0 is inadequate when minValue < 0 (fixes bug that made all negative values appear black)2017-02-28, by Chris Cannam
- Remove unused function2017-02-28, by Chris Cannam
- Use Range01 normalisation in Colour 3D Plot. This gives us the same column normalisation behaviour as in 2.5 (better than the Max1 option).2017-02-28, by Chris Cannam
- Debug notes, tidying2017-02-23, by Chris Cannam
- Merge2017-02-22, by Chris Cannam
- Fix various "model deleted with no aboutToDelete notification" warnings (and one associated potential memory leak)2017-02-22, by Chris Cannam
- Overrides2017-02-22, by Chris Cannam
- Add activity log output to debug log too2017-02-22, by Chris Cannam
- Fix #1792 measure tool crosshairs rendered in wrong colour. Also extend crosshairs over the no-man's-land at the left2017-02-21, by Chris Cannam
- Some work to make spectrum layers (and slice layers generally) zoomable in the frequency axis. Also fixes a number of view id mixups in SliceLayer which broke offset calculations for the x axis scale.2017-02-07, by Chris Cannam
- More tweaks to when to render from the middle2017-01-27, by Chris Cannam
- Looks like we can be a bit more relaxed here2017-01-27, by Chris Cannam
- Wire up normalise-visible-area mode in colour 3d plot2017-01-27, by Chris Cannam
- Untabify2017-01-27, by Chris Cannam
- Scale pen, place line ends in centres of bins, default to line mode2017-01-26, by Chris Cannam
- Move this function into cpp file2017-01-26, by Chris Cannam
- Scale piano keyboard height according to text size2017-01-26, by Chris Cannam
- Fix silly definition that prevented spectrum scale from appearing2017-01-26, by Chris Cannam
- Scale pens2017-01-26, by Chris Cannam
- Add method to scale pen widths for hi-res screens2017-01-26, by Chris Cannam
- Guard only2017-01-26, by Chris Cannam
- Scale pen used for centre line2017-01-26, by Chris Cannam
- Guard only2017-01-26, by Chris Cannam
- Minor debug2017-01-26, by Chris Cannam
- Switch widget type to one that gets mouseover notifications2017-01-26, by Chris Cannam
- Randomise start offset for partial paints, it looks (I think) a little better2017-01-26, by Chris Cannam
- Measure time taken to render per pixel, and use the time last time around to decide whether to be time constrained this time around2017-01-26, by Chris Cannam
- Fix #1781 Running CQ Chromagram spits out stacks of "bin index out of range" warnings2017-01-26, by Chris Cannam
- Fix incorrect call to getColumn() that broke the peak-frequency spectrogram and close zoom levels of the colour 3d plot2017-01-16, by Chris Cannam
- Debug toward tracking down strange peak-frequency spectrogram update problem2017-01-13, by Chris Cannam
- Make getPreferredPeakCache check the render mode itself2017-01-13, by Chris Cannam
- Merge from branch 3.0-integration2017-01-13, by Chris Cannam
- Fix memory leak of cache pixmaps in View3.0-integration 2017-01-13, by Chris Cannam
- More cache hit counts; make debug output from colour 3d plot renderer (even though it is to SVDEBUG) appear only with explicit debug flag3.0-integration 2017-01-05, by Chris Cannam
- Don't start in the middle when repainting the whole width while using a peak cache. It looks funny.3.0-integration 2017-01-05, by Chris Cannam
- Make the colour 3d plot renderer able to support more than one level of peak cache; introduce a second "peak" cache for the spectrogram layer that actually has a 1-1 column relationship with the underlying FFT model, and use it in addition to the existing peak cache if memory is plentiful. Makes spectrograms appear much faster in many common situations.3.0-integration 2017-01-05, by Chris Cannam
- Recreate FFT model when something changes, not the next time it's requested (avoids extra work when only retrieving the model)3.0-integration 2017-01-05, by Chris Cannam
- Wire up record monitoring3.0-integration 2017-01-04, by Chris Cannam
- Provisionally add labels for normalisation menu (sigh)3.0-integration 2017-01-03, by Chris Cannam
- Add help icon, + update subrepo3.0-integration 2017-01-03, by Chris Cannam
- Comment some debug output3.0-integration 2017-01-03, by Chris Cannam
- Fix some compiler warnings3.0-integration 2017-01-03, by Chris Cannam
- Fix erroneous use of single-colour setting to determine dark/light background when in segmentation mode3.0-integration 2016-12-20, by Chris Cannam
- Further PropertyBox layout overhaul: avoid crash (/ assertion failure) when property type changes from e.g. colour to colourmap, by replacing the existing widget within the layout rather than trying to repopulate it3.0-integration 2016-12-20, by Chris Cannam
- Merge from branch svg, and thus (in some subrepos) from levelpanwidget3.0-integration 2016-12-19, by Chris Cannam
- Implement "Export SVG file..."svg 2016-12-19, by Chris Cannam
- Fix incorrect initial display levels in LevelPanWidgetlevelpanwidget 2016-12-16, by Chris Cannam
- Support mouse wheel on level-pan tool buttonlevelpanwidget 2016-12-16, by Chris Cannam
- Add swatches to colour map combo (optionally, as it turns out they are quite visually distracting)levelpanwidget 2016-12-16, by Chris Cannam
- Introduce a colour map combo too. Doesn't yet have swatcheslevelpanwidget 2016-12-16, by Chris Cannam
- Take advantage of the fact that a group layout is now always used, to simplify codelevelpanwidget 2016-12-16, by Chris Cannam
- Introduce colour combobox class, to replace ad-hoc code in property boxlevelpanwidget 2016-12-16, by Chris Cannam
- Adjust spacing in property boxlevelpanwidget 2016-12-15, by Chris Cannam
- Record scale factor in loglevelpanwidget 2016-12-15, by Chris Cannam
- Some adjustments to make view elements clearer and more correctly sized, especially on hidpi (non-pixel-doubling) systemslevelpanwidget 2016-12-15, by Chris Cannam
- Retina thumbwheelslevelpanwidget 2016-12-15, by Chris Cannam
- Tool tipslevelpanwidget 2016-12-15, by Chris Cannam
- An attempt to improve PropertyBox layout on the Mac. Make all rows consistent by always creating a group layout for each row, regardless of whether the item(s) in it are marked as grouped or not.levelpanwidget 2016-12-15, by Chris Cannam
- Make play params area of property box look a bit better on OSXlevelpanwidget 2016-12-15, by Chris Cannam
- As NotifyingPushButton, but a ToolButtonlevelpanwidget 2016-12-15, by Chris Cannam
- Moving around some UI bitslevelpanwidget 2016-12-15, by Chris Cannam
- Merge from branch 3.0-integrationlevelpanwidget 2016-12-14, by Chris Cannam
- Minor debug tweaks3.0-integration 2016-12-14, by Chris Cannam
- Fix some compiler problems3.0-integration 2016-12-13, by Chris Cannam
- Some hackery toward having a zoomlevel typezoom 2016-12-12, by Chris Cannam
- Merge from branch bqresample3.0-integration 2016-12-09, by Chris Cannam
- Fixes to sample rate and latency handlingbqresample 2016-12-09, by Chris Cannam
- Some work on play parameters and level controls in property boxlevelpanwidget 2016-12-06, by Chris Cannam
- Switch to level-pan tool button in property boxlevelpanwidget 2016-12-06, by Chris Cannam
- Introduce level-pan widget to property boxlevelpanwidget 2016-12-05, by Chris Cannam
- Add monitoring to level-pan widget (though not well, yet)levelpanwidget 2016-12-05, by Chris Cannam
- Another use of WidgetScalemore-hidpi 2016-12-05, by Chris Cannam
- Some icon updatesmore-hidpi 2016-12-05, by Chris Cannam
- Scale the sizes of a few more UI elementsmore-hidpi 2016-12-05, by Chris Cannam
- Bigger colour swatches for bigger fonts3.0-integration 2016-11-30, by Chris Cannam
- Always accept wheel events3.0-integration 2016-11-30, by Chris Cannam
- More debug3.0-integration 2016-11-28, by Chris Cannam
- Avoid rounding error giving too few bins in column request3.0-integration 2016-11-23, by Chris Cannam
- Merge from branch bqfft3.0-integration 2016-11-21, by Chris Cannam
- Branch to use bqfft code and remove FFTapibqfft 2016-11-21, by Chris Cannam
- Backed out changeset d89e04b0eff3, thus un-backing-out changeset c036560a7205!3.0-integration 2016-11-17, by Chris Cannam
- Backed out changeset c036560a72053.0-integration 2016-11-17, by Chris Cannam
- Introduce our own scaleDrawBufferImage (though I think we probably won't actually want to use this, so I expect to back it out again)3.0-integration 2016-11-17, by Chris Cannam
- More timings and cache hit counts3.0-integration 2016-11-10, by Chris Cannam
- Use peak cache at one zoom level lower (since it exists at that level already -- this is a >= vs > question) + make naming more uniform3.0-integration 2016-11-08, by Chris Cannam
- Fix omitted topmost bin3.0-integration 2016-11-04, by Chris Cannam
- Fix forehead-slapping failure to use the right model when rendering 3d plot in peaks cache mode (i.e. when zoomed quite far out)3.0-integration 2016-11-04, by Chris Cannam
- Make SVDEBUG always write to a log file -- formerly this was disabled in NDEBUG builds. I think there's little use to that, it just means that we keep adding more cerr debug output because we aren't getting the log we need. And SVDEBUG logging is not usually used in tight loops, I don't think the performance overhead is too serious.3.0-integration 2016-11-03, by Chris Cannam
- Merge from branch piper3.0-integration 2016-10-28, by Chris Cannam
- Tidyingproject-file-rework 2016-10-25, by Chris Cannam
- Minor build updatesproject-file-rework 2016-10-25, by Chris Cannam
- Merge from branch 3.0-integrationproject-file-rework 2016-10-25, by Chris Cannam
- Cut down vastly on the number of config.pri files and places where their contents has to be effectively duplicated without themproject-file-rework 2016-10-24, by Chris Cannam
- Add out-of-process execution to prefs dialog3.0-integration 2016-10-21, by Chris Cannam
- Fix completely bogus allocation that was only shown up because of a compiler warning for int->float conversion possibly restricting value range!3.0-integration 2016-10-20, by Chris Cannam
- Merge from branch "msvc2015_64"3.0-integration 2016-10-20, by Chris Cannam
- Tidy and re-fix for Linuxmsvc2015_64 2016-10-19, by Chris Cannam
- MSVC build fixesmsvc2015_64 2016-10-18, by Chris Cannam
- Merge from branch tony-2.0-integration3.0-integration 2016-09-20, by Chris Cannam
- Merge latest SV 3.0 branch codetony-2.0-integration 2016-08-19, by Chris Cannam
- Introduce labels in RangeMapper and use them in AudioDial, though only for tooltip at present. Make use of this for spectrogram magic -81dB/-Inf threshold. Also introduce static strings for inf/pi and use where appropriate.3.0-integration 2016-08-05, by Chris Cannam
- Merge work on unified spectrogram and colour 3d plot caching renderer3.0-integration 2016-08-05, by Chris Cannam
- Since 1d317e717fe4 we no longer want to fft scale in hybrid mode. (This might also restore compatibility with Tony and prior SV save sessions -- test this.)spectrogram-minor-refactor 2016-08-05, by Chris Cannam
- Make text labels on vertical scale ticks visiblespectrogram-minor-refactor 2016-08-05, by Chris Cannam
- Fixes to phase display and colour scale for it; tidy up some debug outputspectrogram-minor-refactor 2016-08-05, by Chris Cannam
- Pull out paintDetailedScalespectrogram-minor-refactor 2016-08-05, by Chris Cannam
- Minor tidy, + go back to opaque-only spectrogram as intendedspectrogram-minor-refactor 2016-08-05, by Chris Cannam
- Restore illuminateLocalFeatures in spectrogramspectrogram-minor-refactor 2016-08-05, by Chris Cannam
- Reconnect double-click region select in spectrogramspectrogram-minor-refactor 2016-08-04, by Chris Cannam
- Restore phase displayspectrogram-minor-refactor 2016-08-04, by Chris Cannam
- Re-implement dB^2 (log-power) spectrogram settingspectrogram-minor-refactor 2016-08-04, by Chris Cannam
- Re-enable (little-used) normalise-visible-range option in spectrogram layerspectrogram-minor-refactor 2016-08-03, by Chris Cannam
- Use a count of bins rather than min and max bins (because the name maxbin tells us nothing about whether the range is inclusive or not)spectrogram-minor-refactor 2016-08-03, by Chris Cannam
- Another small tidyspectrogram-minor-refactor 2016-08-02, by Chris Cannam
- Fix vertical zoom/scroll in colour 3d plot layerspectrogram-minor-refactor 2016-08-02, by Chris Cannam
- Minor tidyspectrogram-minor-refactor 2016-08-02, by Chris Cannam
- Sensible vertical scale and hybrid normalisation range in colour 3d plotspectrogram-minor-refactor 2016-08-02, by Chris Cannam
- Minor tidyspectrogram-minor-refactor 2016-08-02, by Chris Cannam
- A threshold fixspectrogram-minor-refactor 2016-08-02, by Chris Cannam
- Float/double conversion fixesspectrogram-minor-refactor 2016-08-01, by Chris Cannam
- Fix threshold in spectrogram -- it wasn't working in the last release.spectrogram-minor-refactor 2016-08-01, by Chris Cannam
- Must set range mappers before default values -- the presence of a range mapper alters the way the default is set upspectrogram-minor-refactor 2016-08-01, by Chris Cannam
- Scale range matchingspectrogram-minor-refactor 2016-08-01, by Chris Cannam
- Some notes on gainspectrogram-minor-refactor 2016-08-01, by Chris Cannam
- Some tidyingspectrogram-minor-refactor 2016-07-22, by Chris Cannam
- Fixes and debug output for mag range calculationsspectrogram-minor-refactor 2016-07-22, by Chris Cannam
- Wiring through the magnitude range updatesspectrogram-minor-refactor 2016-07-22, by Chris Cannam
- Toward updating mag cachespectrogram-minor-refactor 2016-07-20, by Chris Cannam
- Inch toward using the mag cache (currently will crash with debug exception)spectrogram-minor-refactor 2016-07-20, by Chris Cannam
- Introduce ScrollableMagRangeCache, plus some tidying etcspectrogram-minor-refactor 2016-07-20, by Chris Cannam
- Fix translucent mode for spectrogramspectrogram-minor-refactor 2016-07-19, by Chris Cannam
- Wire up invertVerticalspectrogram-minor-refactor 2016-07-19, by Chris Cannam
- Re-enable a couple more featuresspectrogram-minor-refactor 2016-07-19, by Chris Cannam
- Tidyspectrogram-minor-refactor 2016-07-19, by Chris Cannam
- Consts and willRenderOpaquespectrogram-minor-refactor 2016-07-19, by Chris Cannam
- Colourmap rotation (inelegantly)spectrogram-minor-refactor 2016-07-19, by Chris Cannam
- Comment onlyspectrogram-minor-refactor 2016-07-19, by Chris Cannam
- Make VerticalBinLayer an actual Layer (via SliceableLayer)spectrogram-minor-refactor 2016-07-19, by Chris Cannam
- Start introducing translucent rendererspectrogram-minor-refactor 2016-07-18, by Chris Cannam