annotate data/model/test/TestFFTModel.h @ 1247:8f076d02569a piper

Make SVDEBUG always write to a log file -- formerly this was disabled in NDEBUG builds. I think there's little use to that, it just means that we keep adding more cerr debug output because we aren't getting the log we need. And SVDEBUG logging is not usually used in tight loops, I don't think the performance overhead is too serious.

Also update the About box.

/* -*- c-basic-offset: 4 indent-tabs-mode: nil -*-  vi:set ts=8 sts=4 sw=4: */

/*
    Sonic Visualiser
    An audio file viewer and annotation editor.
    Centre for Digital Music, Queen Mary, University of London.
    
    This program is free software; you can redistribute it and/or
    modify it under the terms of the GNU General Public License as
    published by the Free Software Foundation; either version 2 of the
    License, or (at your option) any later version.  See the file
    COPYING included with this distribution for more information.
*/

#ifndef TEST_FFT_MODEL_H
#define TEST_FFT_MODEL_H

#include "../FFTModel.h"

#include "MockWaveModel.h"

#include "Compares.h"

#include <QObject>
#include <QtTest>
#include <QDir>

#include <iostream>
#include <complex>

using namespace std;

class TestFFTModel : public QObject
{
    Q_OBJECT

private:
    void test(DenseTimeValueModel *model,
              WindowType window, int windowSize, int windowIncrement, int fftSize,
              int columnNo, vector<vector<complex<float>>> expectedValues,
              int expectedWidth) {
        for (int ch = 0; in_range_for(expectedValues, ch); ++ch) {
            FFTModel fftm(model, ch, window, windowSize, windowIncrement, fftSize);
            QCOMPARE(fftm.getWidth(), expectedWidth);
            int hs1 = fftSize/2 + 1;
            QCOMPARE(fftm.getHeight(), hs1);
            vector<float> reals(hs1 + 1, 0.f);
            vector<float> imags(hs1 + 1, 0.f);
            reals[hs1] = 999.f; // overrun guards
            imags[hs1] = 999.f;
            for (int stepThrough = 0; stepThrough <= 1; ++stepThrough) {
                if (stepThrough) {
                    // Read through the columns in order instead of
                    // randomly accessing the one we want. This is to
                    // exercise the case where the FFT model saves
                    // part of each input frame and moves along by
                    // only the non-overlapping distance
                    for (int sc = 0; sc < columnNo; ++sc) {
                        fftm.getValuesAt(sc, &reals[0], &imags[0]);
                    }
                }
                fftm.getValuesAt(columnNo, &reals[0], &imags[0]);
                for (int i = 0; i < hs1; ++i) {
                    float eRe = expectedValues[ch][i].real();
                    float eIm = expectedValues[ch][i].imag();
                    float thresh = 1e-5f;
                    if (abs(reals[i] - eRe) > thresh ||
                        abs(imags[i] - eIm) > thresh) {
                        cerr << "ERROR: output is not as expected for column "
                             << i << " in channel " << ch << " (stepThrough = "
                             << stepThrough << ")" << endl;
                        cerr << "expected : ";
                        for (int j = 0; j < hs1; ++j) {
                            cerr << expectedValues[ch][j] << " ";
                        }
                        cerr << "\nactual   : ";
                        for (int j = 0; j < hs1; ++j) {
                            cerr << complex<float>(reals[j], imags[j]) << " ";
                        }
                        cerr << endl;
                    }
                    COMPARE_FUZZIER_F(reals[i], eRe);
                    COMPARE_FUZZIER_F(imags[i], eIm);
                }
                QCOMPARE(reals[hs1], 999.f);
                QCOMPARE(imags[hs1], 999.f);
            }
        }
    }

private slots:

    // NB. FFTModel columns are centred on the sample frame, and in
    // particular this means column 0 is centred at sample 0 (i.e. it
    // contains only half the window-size worth of real samples, the
    // others are 0-valued from before the origin).  Generally in
    // these tests we are padding our signal with half a window of
    // zeros, in order that the result for column 0 is all zeros
    // (rather than something with a step in it that is harder to
    // reason about the FFT of) and the results for subsequent columns
    // are those of our expected signal.
    
    void dc_simple_rect() {
	MockWaveModel mwm({ DC }, 16, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 0,
             { { {}, {}, {}, {}, {} } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 1,
             { { { 4.f, 0.f }, {}, {}, {}, {} } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 2,
             { { { 4.f, 0.f }, {}, {}, {}, {} } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 3,
             { { {}, {}, {}, {}, {} } }, 4);
    }

    void dc_simple_hann() {
        // The Hann window function is a simple sinusoid with period
        // equal to twice the window size, and it halves the DC energy
	MockWaveModel mwm({ DC }, 16, 4);
        test(&mwm, HanningWindow, 8, 8, 8, 0,
             { { {}, {}, {}, {}, {} } }, 4);
        test(&mwm, HanningWindow, 8, 8, 8, 1,
             { { { 4.f, 0.f }, { 2.f, 0.f }, {}, {}, {} } }, 4);
        test(&mwm, HanningWindow, 8, 8, 8, 2,
             { { { 4.f, 0.f }, { 2.f, 0.f }, {}, {}, {} } }, 4);
        test(&mwm, HanningWindow, 8, 8, 8, 3,
             { { {}, {}, {}, {}, {} } }, 4);
    }
    
    void dc_simple_hann_halfoverlap() {
	MockWaveModel mwm({ DC }, 16, 4);
        test(&mwm, HanningWindow, 8, 4, 8, 0,
             { { {}, {}, {}, {}, {} } }, 7);
        test(&mwm, HanningWindow, 8, 4, 8, 2,
             { { { 4.f, 0.f }, { 2.f, 0.f }, {}, {}, {} } }, 7);
        test(&mwm, HanningWindow, 8, 4, 8, 3,
             { { { 4.f, 0.f }, { 2.f, 0.f }, {}, {}, {} } }, 7);
        test(&mwm, HanningWindow, 8, 4, 8, 6,
             { { {}, {}, {}, {}, {} } }, 7);
    }
    
    void sine_simple_rect() {
	MockWaveModel mwm({ Sine }, 16, 4);
        // Sine: output is purely imaginary. Note the sign is flipped
        // (normally the first half of the output would have negative
        // sign for a sine starting at 0) because the model does an
        // FFT shift to centre the phase
        test(&mwm, RectangularWindow, 8, 8, 8, 0,
             { { {}, {}, {}, {}, {} } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 1,
             { { {}, { 0.f, 2.f }, {}, {}, {} } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 2,
             { { {}, { 0.f, 2.f }, {}, {}, {} } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 3,
             { { {}, {}, {}, {}, {} } }, 4);
    }
    
    void cosine_simple_rect() {
	MockWaveModel mwm({ Cosine }, 16, 4);
        // Cosine: output is purely real. Note the sign is flipped
        // because the model does an FFT shift to centre the phase
        test(&mwm, RectangularWindow, 8, 8, 8, 0,
             { { {}, {}, {}, {}, {} } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 1,
             { { {}, { -2.f, 0.f }, {}, {}, {} } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 2,
             { { {}, { -2.f, 0.f }, {}, {}, {} } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 3,
             { { {}, {}, {}, {}, {} } }, 4);
    }
    
    void twochan_simple_rect() {
	MockWaveModel mwm({ Sine, Cosine }, 16, 4);
        // Test that the two channels are read and converted separately
        test(&mwm, RectangularWindow, 8, 8, 8, 0,
             {
                 { {}, {}, {}, {}, {} },
                 { {}, {}, {}, {}, {} }
             }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 1,
             {
                 { {}, {  0.f, 2.f }, {}, {}, {} },
                 { {}, { -2.f, 0.f }, {}, {}, {} }
             }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 2,
             {
                 { {}, {  0.f, 2.f }, {}, {}, {} },
                 { {}, { -2.f, 0.f }, {}, {}, {} }
             }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 3,
             {
                 { {}, {}, {}, {}, {} },
                 { {}, {}, {}, {}, {} }
             }, 4);
    }
    
    void nyquist_simple_rect() {
	MockWaveModel mwm({ Nyquist }, 16, 4);
        // Again, the sign is flipped. This has the same amount of
        // energy as the DC example
        test(&mwm, RectangularWindow, 8, 8, 8, 0,
             { { {}, {}, {}, {}, {} } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 1,
             { { {}, {}, {}, {}, { -4.f, 0.f } } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 2,
             { { {}, {}, {}, {}, { -4.f, 0.f } } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 3,
             { { {}, {}, {}, {}, {} } }, 4);
    }
    
    void dirac_simple_rect() {
	MockWaveModel mwm({ Dirac }, 16, 4);
        // The window scales by 0.5 and some signs are flipped. Only
        // column 1 has any data (the single impulse).
        test(&mwm, RectangularWindow, 8, 8, 8, 0,
             { { {}, {}, {}, {}, {} } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 1,
             { { { 0.5f, 0.f }, { -0.5f, 0.f }, { 0.5f, 0.f }, { -0.5f, 0.f }, { 0.5f, 0.f } } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 2,
             { { {}, {}, {}, {}, {} } }, 4);
        test(&mwm, RectangularWindow, 8, 8, 8, 3,
             { { {}, {}, {}, {}, {} } }, 4);
    }
    
    void dirac_simple_rect_2() {
	MockWaveModel mwm({ Dirac }, 16, 8);
        // With 8 samples padding, the FFT shift places the first
        // Dirac impulse at the start of column 1, thus giving all
        // positive values
        test(&mwm, RectangularWindow, 8, 8, 8, 0,
             { { {}, {}, {}, {}, {} } }, 5);
        test(&mwm, RectangularWindow, 8, 8, 8, 1,
             { { { 0.5f, 0.f }, { 0.5f, 0.f }, { 0.5f, 0.f }, { 0.5f, 0.f }, { 0.5f, 0.f } } }, 5);
        test(&mwm, RectangularWindow, 8, 8, 8, 2,
             { { {}, {}, {}, {}, {} } }, 5);
        test(&mwm, RectangularWindow, 8, 8, 8, 3,
             { { {}, {}, {}, {}, {} } }, 5);
        test(&mwm, RectangularWindow, 8, 8, 8, 4,
             { { {}, {}, {}, {}, {} } }, 5);
    }

    void dirac_simple_rect_halfoverlap() {
	MockWaveModel mwm({ Dirac }, 16, 4);
        test(&mwm, RectangularWindow, 8, 4, 8, 0,
             { { {}, {}, {}, {}, {} } }, 7);
        test(&mwm, RectangularWindow, 8, 4, 8, 1,
             { { { 0.5f, 0.f }, { 0.5f, 0.f }, { 0.5f, 0.f }, { 0.5f, 0.f }, { 0.5f, 0.f } } }, 7);
        test(&mwm, RectangularWindow, 8, 4, 8, 2,
             { { { 0.5f, 0.f }, { -0.5f, 0.f }, { 0.5f, 0.f }, { -0.5f, 0.f }, { 0.5f, 0.f } } }, 7);
        test(&mwm, RectangularWindow, 8, 4, 8, 3,
             { { {}, {}, {}, {}, {} } }, 7);
    }
    
};

#endif