Collidoscope

h1. Overview

Collidoscope is an interactive, collaborative *sound installation* and *musical instrument* (granular synthesizer) 

that allows participants to seamlessly record, manipulate, explore and perform real-world sounds. 

It is designed for both *amateurs and professional musicians*.

Collidsocope massively drives on the *research* conducted at the "Center for Digital Music at Queen Mary University of London":http://c4dm.eecs.qmul.ac.uk

in real-time sound processing and synthesis, hardware design, physical computing, UI design, designing for interaction,

accessibility and collaboration.

The *granular synthesis engine* is based on Ross Becina's paper "Implementing Real-Time Granular Synthesis":http://www.cs.au.dk/~dsound/DigitalAudio.dir/Papers/BencinaAudioAnecdotes310801.pdf, on the 

"TGrains Unit Generator":http://doc.sccode.org/Classes/TGrains.html of the SuperCollider language and on the "Cross-modal DAW Prototype":https://code.soundsoftware.ac.uk/projects/cmdp developed in the EPSRC

funded project Design Patterns for Inclusive Collaboration ("DePIC":http://depic.eecs.qmul.ac.uk)

Collidoscope was funded by the EPCRC Centre for Digital Music (C4DM) Platform Grant (EP/K009559/1) and the 

EPSRC Design Patterns for Inclusive Collaboration (DePIC)  grant (EP/J017205/1).

This repository contains all you need to build your own Collidoscope unit.

The "Downloads section":https://code.soundsoftware.ac.uk/projects/opencollidoscope/files contains:

* The software binary you need to run Collidoscope, released under GPL license;

* The introduction guide to get you started with Collidoscope and to get an overview of its inner architecture;

* A guide on how to install the software or compile it yourself if you’d like to;

* A reference on the MIDI messages used by the Collidoscope software;

* The 3D CAD files to build your own physical unit.

The "Software Repository":https://code.soundsoftware.ac.uk/projects/opencollidoscope/repository contains:

* The CollidoscopeApp source code, that runs the graphics and the audio engine. Released under the _GPL version 3_ license;

* The CollidoscopeTeensy source code, namely the software running on the Teensy microcontroller that turns the sensor data

  into MIDI messages for the CollidoscopeApp. Also released under the _GPL version 3_;

* The Printed Circuit Board that we used with the Teensy microcontroller to make it easier to plug/unplug the sensors to it. 

This is released under the _Creative Commons Attribution-ShareAlike 3.0_.