Mercurial > hg > svgui

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 1496: (0) -1000 -128 tip
age author description
2019-08-14 Chris Cannam Separate out handling of alignment progress bar from the layer progress bars and fix tendency to have them hanging around even when alignment has completed
2019-08-13 Chris Cannam Toward trying to figure out a progress-bar problem
2019-08-13 Chris Cannam Ensure rightCropFrame doesn't end up rounded to the left of the desired end pixel
2019-08-09 Chris Cannam Improve drawn alignment of lines in AlignmentView against the view below; also cache the mapping locations
2019-08-08 Chris Cannam Debug
2019-08-08 Chris Cannam Fix overlooked alignment
2019-08-02 Chris Cannam Attempt a mechanism for the View to time-align a layer on display using an aligning version of the ViewProxy
2019-08-02 Chris Cannam Add direct method to get source model
2019-07-19 Chris Cannam Correct erroneous signal signature
2019-07-18 Chris Cannam Fix failure to show alignment progress bar
2019-07-17 Chris Cannam Merge from branch by-id
2019-07-17 Chris Cannam Tidy; also don't show cancel buttons for alignments by-id
2019-07-17 Chris Cannam Fix inability to set layer's model to None by-id
2019-07-15 Chris Cannam Emit a signal when a cancel is pressed by-id
2019-07-12 Chris Cannam Comment by-id
2019-07-05 Chris Cannam Update for removal of (public) getId from Model by-id
2019-07-04 Chris Cannam Update for changes to PlayParameters by-id
2019-07-03 Chris Cannam Further ModelId updates by-id
2019-07-03 Chris Cannam Fix a number of Qt deprecation warnings by-id
2019-07-02 Chris Cannam Further ModelId updates by-id
2019-07-02 Chris Cannam Couple more updates by-id
2019-07-02 Chris Cannam Further layer updates by-id
2019-07-02 Chris Cannam Further layer updates for ModelById by-id
2019-07-02 Chris Cannam Further layer updates for ModelById by-id
2019-07-01 Chris Cannam Further layer updates by-id
2019-07-01 Chris Cannam More layer updates by-id
2019-06-28 Chris Cannam Further layer updates for ById by-id
2019-06-27 Chris Cannam Some work on updating layers for ModelId bits by-id
2019-06-13 Chris Cannam Add opportunistic-editing toggle
2019-06-13 Chris Cannam Don't try to draw scale from a dormant layer!
2019-05-24 Chris Cannam Merge
2019-05-24 Chris Cannam Don't attempt performance alignment when not in align mode
2019-05-24 Chris Cannam Fix incorrect frequency display in peak-freq mode
2019-05-22 Chris Cannam Branch 3.3-stable
2019-05-20 Chris Cannam Fix incorrect visibility of alignment view when not requested; fix current indicator size when x-button is disabled
2019-05-20 Chris Cannam Fix incorrect repaint at left edge in segmentation mode
2019-05-17 Chris Cannam Add option to suppress close button on first pane
2019-05-17 Chris Cannam Merge from branch single-point
2019-05-16 Chris Cannam Make it possible to disable cancel buttons single-point
2019-05-16 Chris Cannam Avoid showing progress bars for dormant layers. They'll typically be duplicates, e.g. in the vect app you can get many dormant layers all reporting the alignment completion at the same time. (Maybe it would be better just to reject progress bars for alignment in dormant layers? Hm) single-point
2019-05-10 Chris Cannam Comment single-point
2019-05-10 Chris Cannam Add setLayerProperties (from XML string) single-point
2019-05-10 Chris Cannam Remove margin from inner frame single-point
2019-05-09 Chris Cannam Smoother cache & colour management in colour 3d plots single-point
2019-05-03 Chris Cannam Make inversion configurable in settings single-point
2019-05-01 Chris Cannam When invalidating cache in a time-constrained context, don't start rendering in the same cycle as well - leave it for a further update. Slightly experimental effort to make the UI feel more responsive. single-point
2019-05-01 Chris Cannam Tweak peak-cache allocations etc in the hope of making long spectrograms a little faster to re-render single-point
2019-05-01 Chris Cannam Don't discard large wheel deltas; just clamp them single-point
2019-05-01 Chris Cannam Some debug bits single-point
2019-04-30 Chris Cannam Add option to make pane sizes auto-resize-only (i.e. remove user control via a splitter); also place alignment views above panes instead of below, meaning the extra bit of space that we currently have for the pane without one at least goes to the primary pane single-point
2019-04-30 Chris Cannam Shrink alignment panes to sensible size on non-hi-dpi screens single-point
2019-04-30 Chris Cannam Add getNearbyColourIndex to ColourDatabase; tweak getContrastingColour for bright colours; add comments single-point
2019-04-25 Chris Cannam Avoid showing final (useless) alignment view single-point
2019-04-24 Chris Cannam Make AudioDial a bit more visible with a dark background single-point
2019-04-24 Chris Cannam Merge from default branch single-point
2019-04-24 Chris Cannam Comment
2019-04-23 Chris Cannam Add function to request multiple filenames
2019-03-28 Chris Cannam Update to using export IDs stored in XmlExportables single-point
2019-03-22 Chris Cannam Use updated ImageModel single-point
2019-03-22 Chris Cannam Use updated TextModel single-point
2019-03-21 Chris Cannam Fix tendency of start position of measure rect to wander as you drag out the rect (at certain zoom resolutions) single-point
2019-03-21 Chris Cannam Merge
2019-03-21 Chris Cannam Fix tendency of start position of measure rect to wander as you drag out the rec
2019-03-21 Chris Cannam Updates for SparseOneDimensionalModel in new API single-point
2019-03-20 Chris Cannam Further snap fixes single-point
2019-03-20 Chris Cannam Begin fixing the various snap operations. Also remove SnapNearest, which is never used and seems to consume more lines of code than the rest! single-point
2019-03-20 Chris Cannam Use overspill to render time-value point line properly at edges single-point
2019-03-19 Chris Cannam Update TimeValueLayer etc single-point
2019-03-15 Chris Cannam Update RegionLayer to updated RegionModel single-point
2019-03-15 Chris Cannam Update to use external set of commands single-point
2019-03-14 Chris Cannam Update following FlexiNoteModel removal, using new NoteModel API where flexi was previously used single-point
2019-03-14 Chris Cannam Finish updating NoteLayer to single-point API single-point
2019-03-13 Chris Cannam Toward getting NoteLayer to work with single-point APIs single-point
2019-03-08 Chris Cannam Update to Event api in place of Clipboard points single-point
2019-03-05 Chris Cannam Keep the point being edited highlighted while the edit dialog is open
2019-02-18 Chris Cannam Fix inadvertent hardcoding of SV file extension
2019-02-14 Chris Cannam Merge
2019-02-14 Chris Cannam Comments
2019-02-14 Chris Cannam Use zero-width pen when zoomed out - this seems to make a huge difference to speed when rendering on top of another layer, for some reason
2019-01-23 Chris Cannam Merge
2019-01-21 Chris Cannam Fix potential divide-by-zero
2019-01-21 Chris Cannam Avoid compiler warning
2019-01-09 Chris Cannam Merge from branch fix-static-analysis
2019-01-09 Chris Cannam Support changing the separator (if more than one plausible one is found) and repopulating the dialog
2018-12-19 Chris Cannam Debug tweaks
2018-12-19 Chris Cannam Sample a column only if it is set (avoids flash of mis-ranged material when scrolling with view normalisation on)
2018-12-04 Chris Cannam Merge from default branch fix-static-analysis
2018-11-29 Chris Cannam Fix erasing of Region layer labels as the playhead moves over them
2018-11-26 Chris Cannam Use nullptr throughout fix-static-analysis
2018-11-26 Chris Cannam Header guards fix-static-analysis
2018-11-26 Chris Cannam Use override throughout fix-static-analysis
2018-11-22 Chris Cannam Fixes from clang modernize-use-override fix-static-analysis
2018-11-16 Chris Cannam Make horizontal wheeling a bit less crazily fast in the absence of fine delta information
2018-11-15 Chris Cannam Retain consistent min freq (rather than min bin no) when changing fft parameters in spectrum; scale ffts by window size rather than fft size in case of oversampling, to avoid fading out because of scale factor including zero padding
2018-11-15 Chris Cannam Handle integer pixel scaling as well
2018-11-15 Chris Cannam Scale pen for retina display on macOS as well as for hidpi display elsewhere
2018-11-15 Chris Cannam Different approach to x-coord calculation in slice layer - let's acknowledge that we really do have two different types of model, those whose "bins" are actually at a single value (frequency in the case of the spectrum) and those whose bins are just labels.
2018-11-14 Chris Cannam Fixes to spectrum axis calculations, + default to starting at bin 1
2018-11-14 Chris Cannam We need to draw illumination label *after* the spectrum...
2018-11-14 Chris Cannam Fix some incorrect pixel scaling
2018-11-14 Chris Cannam Fix compiler warning
2018-11-14 Chris Cannam Merge from branch spectrogramparam
2018-11-14 Chris Cannam Various tweaks & fixes to log-scale handling in spectrum. We can't easily preserve the nice behaviour where peaks stay in place as fft size changes, without potentially losing a bit of low-frequency information spectrogramparam
2018-11-14 Chris Cannam Correct positioning for centre line when antialiasing with non-0-width pen spectrogramparam
2018-11-14 Chris Cannam Highlight the current peak line in the spectrum (when shown); also a fix to the crosshair labelling spectrogramparam
2018-11-13 Chris Cannam Toward highlighting peaks on spectrum spectrogramparam
2018-11-13 Chris Cannam Move layer name text up a bit when rendering on a layer with a horizontal scale (i.e. spectrum) spectrogramparam
2018-11-13 Chris Cannam Make "zoom to region" work sensibly for slice/spectrum layers; ensure that min/max bin are remapped properly when changing fft size spectrogramparam
2018-11-13 Chris Cannam Make mention of the shift-drag feature and zooming in the status text spectrogramparam
2018-11-12 Chris Cannam Small speedups spectrogramparam
2018-11-12 Chris Cannam Use log-frequency rather than log-bin for calculating x coord in spectrum. This has the advantage that frequency positions don't move when we change the window size or oversampling ratio, but it does give us an unhelpfully large amount of space for very low frequencies - to be considered spectrogramparam
2018-11-08 Chris Cannam Retrieve only the values already determined to be peaks spectrogramparam
2018-11-08 Chris Cannam Fix "colour" rendering for spectrum (now resembles a filled "line" mode rather than a filled "block" mode) spectrogramparam
2018-11-07 Chris Cannam Switch spectrum to antialiased drawing with considerable speedup for the dense areas; take horizontal scale height into account when rendering slice layer height spectrogramparam
2018-11-07 Chris Cannam Add oversampling option to spectrum as well spectrogramparam
2018-11-06 Chris Cannam Merge from default branch spectrogramparam
2018-11-06 Chris Cannam Make the context help for custom controls explain how to reset them
2018-11-06 Chris Cannam Experimental oversampling param spectrogramparam
2018-11-06 Chris Cannam Avoid nan/inf values (and consequent crash) in colour scale range
2018-11-06 Chris Cannam Use label of property for tooltip, not just id of it
2018-11-06 Chris Cannam Merge from branch zoom
2018-11-06 Chris Cannam Fix incorrect start/end overlay drawing when zoomed far in zoom
2018-11-06 Chris Cannam Merge from default branch zoom
2018-11-05 Chris Cannam Scaling tweaks
2018-11-02 Chris Cannam Short-circuit drawing a little bit for contiguous ranges
2018-11-02 Chris Cannam Progressively increase sample-box size slightly
2018-11-01 Chris Cannam Initialise level and pan from current state of layer's parameters (e.g. when reloading session) waverevision
2018-11-01 Chris Cannam Use a distinguishable text for this state waverevision
less more | rev 1496: (0) -1000 -128 tip