| Thu, 31 Oct 2019 15:32:01 +0000 |
Chris Cannam |
Use x + width() instead of QRect::right(), which doesn't return what we need and leaves us a pixel short; also subtract the resolution from the start frame to avoid scrolling scraggy single-pixel lines when we should be drawing nice fat ones
|
| Thu, 17 Oct 2019 14:44:22 +0100 |
Chris Cannam |
Permit getScaleProvidingLayerForUnit to return a dormant layer if there is no visible alternative. This is necessary to avoid the scale disappearing in Tony when the spectrogram is toggled off.
|
| Thu, 17 Oct 2019 11:12:54 +0100 |
Chris Cannam |
Pass a y-coord, optionally, to Layer::snapToFeatureFrame. This is necessary for BoxLayer which needs to coordinate its snaps with the box it is highlighting for editing. Then in BoxLayer, merge getPointToDrag and getLocalPoints into a single getLocalPoint and use this throughout.
|
| Thu, 17 Oct 2019 10:26:21 +0100 |
Chris Cannam |
Update getPointToDrag to prefer boxes that are containing the mouse position in height as well as width
|
| Wed, 16 Oct 2019 16:20:12 +0100 |
Chris Cannam |
Make audio dial more visible in Mac dark mode
|
| Wed, 16 Oct 2019 13:02:52 +0100 |
Chris Cannam |
Return true from getValueExtents always, just with no unit in the case where we don't have a nice neat scale. This should preserve the property of preventing other layers auto-aligning to us, while also ensuring we don't get overlooked for the purposes of drawing our own scale in a situation where a scale-less layer is on top of us
|
| Wed, 16 Oct 2019 13:01:23 +0100 |
Chris Cannam |
Debug output
|
| Wed, 16 Oct 2019 12:23:36 +0100 |
Chris Cannam |
Overhaul the way WaveformLayer reports value and display extents. The previous logic has been nonsense for a very long time, excused only by the fact that it was very seldom relevant (only really if another layer with unit V came along that wanted to auto-align with it). Partial fix for #1954 Peculiar alignment for Amplitude Follower y-scale in Auto-Align mode
|
| Wed, 16 Oct 2019 12:19:04 +0100 |
Chris Cannam |
Fix getScaleProvidingLayerForUnit to make it only return a layer that actually has display extents. Modify getVisibleExtentsForUnit to make it more like the behaviour in 3.x: where no layer with display extents is found, use the union of the value extents of layers with the right unit. Partial fix for #1954 Peculiar alignment for Amplitude Follower y-scale in Auto-Align mode.
|
| Wed, 16 Oct 2019 12:13:28 +0100 |
Chris Cannam |
Debug output tweaks
|
| Tue, 15 Oct 2019 14:53:25 +0100 |
Chris Cannam |
Overhaul choice of layer to show scale, in Pane::drawVerticalScale, making it call out to the same logic used by View::getVisibleExtentsForUnit when appropriate. Also refuse to accept scale from dormant top layer.
|
| Tue, 15 Oct 2019 14:51:58 +0100 |
Chris Cannam |
Avoid compiler warning
|
| Tue, 15 Oct 2019 11:40:56 +0100 |
Chris Cannam |
Clarify naming of some view-related methods. Rename LayerGeometryProvider::getValueExtents to getVisibleExtentsForUnit, and View::getTextLabelHeight to getTextLabelYCoord. Add View::getVisibleExtentsForAnyUnit to be used to determine which unit to adopt in a new e.g. box layer.
|
| Tue, 15 Oct 2019 09:32:24 +0100 |
Chris Cannam |
Fix #1951 Selecting row in data editor with multiple items having same frame always selects the first
|
| Mon, 14 Oct 2019 14:20:02 +0100 |
Chris Cannam |
Tidy / debug
|
| Wed, 09 Oct 2019 13:45:17 +0100 |
Chris Cannam |
Fix #1904 Scrolling colour 3d plot does not always work when in View normalisation mode. We shouldn't imagine we've just invalidated the cache if the truth is that we've only just created the renderer
|
| Wed, 09 Oct 2019 11:51:19 +0100 |
Chris Cannam |
Fix failure to apply new frame when pasting events
|
| Wed, 09 Oct 2019 11:33:33 +0100 |
Chris Cannam |
Further light streamlining
|
| Wed, 09 Oct 2019 11:17:26 +0100 |
Chris Cannam |
Slightly streamline image scaling
|
| Mon, 07 Oct 2019 14:30:13 +0100 |
Chris Cannam |
Don't create alignment views at all if not requested (now that the request is made only at construction time)
|
| Mon, 07 Oct 2019 14:08:23 +0100 |
Chris Cannam |
Fix alignment of property box when switching back on after having been hidden
|
| Mon, 07 Oct 2019 09:43:31 +0100 |
Chris Cannam |
Fix compiler warning
|
| Fri, 04 Oct 2019 16:35:22 +0100 |
Chris Cannam |
Fix goof
|
| Fri, 04 Oct 2019 13:51:24 +0100 |
Chris Cannam |
Rework PaneStack so that the options that generally aren't (or can't be) changed after construction are supplied to the constructor instead of being set through setter methods.
|
| Fri, 04 Oct 2019 13:37:39 +0100 |
Chris Cannam |
Debug bits
|
| Wed, 25 Sep 2019 14:11:42 +0100 |
Chris Cannam |
Merge
|
| Wed, 25 Sep 2019 13:42:17 +0100 |
Chris Cannam |
Make the waveform layer do the expected thing when MergeChannels mode (i.e. butterfly mode) is enabled even if there is only 1 channel. This combination isn't actually available in the UI for SV, but it's useful for Sonic Lineup.
|
| Wed, 25 Sep 2019 13:48:04 +0100 |
Chris Cannam |
Merge from branch time-frequency-boxes
|
| Wed, 25 Sep 2019 11:09:06 +0100 |
Chris Cannam |
With duration and two values, propose a box model (value and extent)
time-frequency-boxes
|
| Wed, 25 Sep 2019 09:46:27 +0100 |
Chris Cannam |
Tidying
time-frequency-boxes
|
| Wed, 25 Sep 2019 09:46:20 +0100 |
Chris Cannam |
Make getTopLayerDisplayExtents public (ugh) for use when setting up a new empty layer with auto-align over the top of another one
time-frequency-boxes
|
| Wed, 25 Sep 2019 09:45:42 +0100 |
Chris Cannam |
Rename TimeFrequencyBoxLayer to just BoxLayer, supporting vertical scales other than Hz
time-frequency-boxes
|
| Sat, 21 Sep 2019 19:13:14 +0100 |
Chris Cannam |
Fix confusion about capture scope with MSVC
time-frequency-boxes
|
| Fri, 20 Sep 2019 14:48:55 +0100 |
Chris Cannam |
This is what the icon is actually called
time-frequency-boxes
|
| Fri, 20 Sep 2019 14:19:17 +0100 |
Chris Cannam |
Item-editing updates needed for time-frequency box layer
time-frequency-boxes
|
| Fri, 20 Sep 2019 11:25:47 +0100 |
Chris Cannam |
Fixes to drag and paint in time-freq box layer
time-frequency-boxes
|
| Fri, 20 Sep 2019 11:25:22 +0100 |
Chris Cannam |
Shorten name (Boxes -> Box)
time-frequency-boxes
|
| Thu, 19 Sep 2019 17:15:36 +0100 |
Chris Cannam |
Add TimeFrequencyBoxes to layer factory
time-frequency-boxes
|
| Thu, 19 Sep 2019 15:18:28 +0100 |
Chris Cannam |
Introduce time-frequency box layer
time-frequency-boxes
|
| Tue, 17 Sep 2019 12:50:58 +0100 |
Chris Cannam |
Merge
|
| Tue, 17 Sep 2019 12:50:34 +0100 |
Chris Cannam |
The default key frame map is not working well at the moment, because its extents are not being properly updated as the models they depend on are loaded. Leave it empty for now.
|
| Mon, 16 Sep 2019 13:34:56 +0100 |
Chris Cannam |
Comment
|
| Fri, 13 Sep 2019 17:40:59 +0100 |
Chris Cannam |
Fix, I think, #1914 Mounting rounding error when dragging aligned view left/right - and therefore the associated #1874 Pointer position becomes increasingly erroneous when rewinding with alignment active
|
| Fri, 13 Sep 2019 17:27:14 +0100 |
Chris Cannam |
Debug updates
|
| Fri, 13 Sep 2019 17:26:11 +0100 |
Chris Cannam |
Debug changes
|
| Thu, 12 Sep 2019 13:50:24 +0100 |
Chris Cannam |
Only set maximum frequency on FFT model when in a special verticallyFixed mode
|
| Thu, 12 Sep 2019 11:53:40 +0100 |
Chris Cannam |
Set maximum frequency on FFT model to reduce cache size (experimental)
|
| Thu, 12 Sep 2019 11:53:17 +0100 |
Chris Cannam |
Pass the cache pointer through rather than looking it up afresh from the model id for each column
|
| Wed, 11 Sep 2019 20:36:04 +0100 |
Chris Cannam |
Generate peak cache directly from model, not from whole-model cache (which turns out to be very slow for large models)
|
| Wed, 11 Sep 2019 11:21:00 +0100 |
Chris Cannam |
More debug bits
|
| Tue, 10 Sep 2019 16:35:28 +0100 |
Chris Cannam |
Debug concerns
|
| Wed, 04 Sep 2019 17:31:21 +0100 |
Chris Cannam |
Indentation
|
| Thu, 15 Aug 2019 18:18:22 +0100 |
Chris Cannam |
Show relative pitch if recorded
|
| Wed, 14 Aug 2019 10:58:24 +0100 |
Chris Cannam |
Separate out handling of alignment progress bar from the layer progress bars and fix tendency to have them hanging around even when alignment has completed
|
| Tue, 13 Aug 2019 15:10:32 +0100 |
Chris Cannam |
Toward trying to figure out a progress-bar problem
|
| Tue, 13 Aug 2019 14:35:29 +0100 |
Chris Cannam |
Ensure rightCropFrame doesn't end up rounded to the left of the desired end pixel
|
| Fri, 09 Aug 2019 19:02:51 +0100 |
Chris Cannam |
Improve drawn alignment of lines in AlignmentView against the view below; also cache the mapping locations
|
| Thu, 08 Aug 2019 13:33:38 +0100 |
Chris Cannam |
Debug
|
| Thu, 08 Aug 2019 13:33:30 +0100 |
Chris Cannam |
Fix overlooked alignment
|
| Fri, 02 Aug 2019 16:44:32 +0100 |
Chris Cannam |
Attempt a mechanism for the View to time-align a layer on display using an aligning version of the ViewProxy
|
| Fri, 02 Aug 2019 16:42:32 +0100 |
Chris Cannam |
Add direct method to get source model
|
| Fri, 19 Jul 2019 16:10:19 +0100 |
Chris Cannam |
Correct erroneous signal signature
|
| Thu, 18 Jul 2019 13:18:19 +0100 |
Chris Cannam |
Fix failure to show alignment progress bar
|
| Wed, 17 Jul 2019 14:25:16 +0100 |
Chris Cannam |
Merge from branch by-id
|
| Wed, 17 Jul 2019 13:12:56 +0100 |
Chris Cannam |
Tidy; also don't show cancel buttons for alignments
by-id
|
| Wed, 17 Jul 2019 11:20:08 +0100 |
Chris Cannam |
Fix inability to set layer's model to None
by-id
|
| Mon, 15 Jul 2019 13:49:57 +0100 |
Chris Cannam |
Emit a signal when a cancel is pressed
by-id
|
| Fri, 12 Jul 2019 16:29:59 +0100 |
Chris Cannam |
Comment
by-id
|
| Fri, 05 Jul 2019 15:34:50 +0100 |
Chris Cannam |
Update for removal of (public) getId from Model
by-id
|
| Thu, 04 Jul 2019 18:04:44 +0100 |
Chris Cannam |
Update for changes to PlayParameters
by-id
|
| Wed, 03 Jul 2019 14:20:42 +0100 |
Chris Cannam |
Further ModelId updates
by-id
|
| Wed, 03 Jul 2019 08:55:02 +0100 |
Chris Cannam |
Fix a number of Qt deprecation warnings
by-id
|
| Tue, 02 Jul 2019 19:05:45 +0100 |
Chris Cannam |
Further ModelId updates
by-id
|
| Tue, 02 Jul 2019 15:38:37 +0100 |
Chris Cannam |
Couple more updates
by-id
|
| Tue, 02 Jul 2019 15:29:17 +0100 |
Chris Cannam |
Further layer updates
by-id
|
| Tue, 02 Jul 2019 14:08:44 +0100 |
Chris Cannam |
Further layer updates for ModelById
by-id
|
| Tue, 02 Jul 2019 11:49:52 +0100 |
Chris Cannam |
Further layer updates for ModelById
by-id
|
| Mon, 01 Jul 2019 14:25:53 +0100 |
Chris Cannam |
Further layer updates
by-id
|
| Mon, 01 Jul 2019 14:17:13 +0100 |
Chris Cannam |
More layer updates
by-id
|
| Fri, 28 Jun 2019 17:37:22 +0100 |
Chris Cannam |
Further layer updates for ById
by-id
|
| Thu, 27 Jun 2019 13:16:25 +0100 |
Chris Cannam |
Some work on updating layers for ModelId bits
by-id
|
| Thu, 13 Jun 2019 15:35:01 +0100 |
Chris Cannam |
Add opportunistic-editing toggle
|
| Thu, 13 Jun 2019 15:05:25 +0100 |
Chris Cannam |
Don't try to draw scale from a dormant layer!
|
| Fri, 24 May 2019 15:14:09 +0100 |
Chris Cannam |
Merge
|
| Fri, 24 May 2019 15:13:57 +0100 |
Chris Cannam |
Don't attempt performance alignment when not in align mode
|
| Fri, 24 May 2019 14:29:19 +0100 |
Chris Cannam |
Fix incorrect frequency display in peak-freq mode
|
| Wed, 22 May 2019 15:40:19 +0100 |
Chris Cannam |
Branch
3.3-stable
|
| Mon, 20 May 2019 15:04:32 +0100 |
Chris Cannam |
Fix incorrect visibility of alignment view when not requested; fix current indicator size when x-button is disabled
|
| Mon, 20 May 2019 15:04:07 +0100 |
Chris Cannam |
Fix incorrect repaint at left edge in segmentation mode
|
| Fri, 17 May 2019 14:37:02 +0100 |
Chris Cannam |
Add option to suppress close button on first pane
|
| Fri, 17 May 2019 10:02:52 +0100 |
Chris Cannam |
Merge from branch single-point
|
| Thu, 16 May 2019 15:50:11 +0100 |
Chris Cannam |
Make it possible to disable cancel buttons
single-point
|
| Thu, 16 May 2019 15:50:02 +0100 |
Chris Cannam |
Avoid showing progress bars for dormant layers. They'll typically be duplicates, e.g. in the vect app you can get many dormant layers all reporting the alignment completion at the same time. (Maybe it would be better just to reject progress bars for alignment in dormant layers? Hm)
single-point
|
| Fri, 10 May 2019 15:50:51 +0100 |
Chris Cannam |
Comment
single-point
|
| Fri, 10 May 2019 09:22:20 +0100 |
Chris Cannam |
Add setLayerProperties (from XML string)
single-point
|
| Fri, 10 May 2019 08:44:32 +0100 |
Chris Cannam |
Remove margin from inner frame
single-point
|
| Thu, 09 May 2019 13:42:18 +0100 |
Chris Cannam |
Smoother cache & colour management in colour 3d plots
single-point
|
| Fri, 03 May 2019 17:45:39 +0100 |
Chris Cannam |
Make inversion configurable in settings
single-point
|
| Wed, 01 May 2019 15:15:26 +0100 |
Chris Cannam |
When invalidating cache in a time-constrained context, don't start rendering in the same cycle as well - leave it for a further update. Slightly experimental effort to make the UI feel more responsive.
single-point
|
| Wed, 01 May 2019 14:41:28 +0100 |
Chris Cannam |
Tweak peak-cache allocations etc in the hope of making long spectrograms a little faster to re-render
single-point
|
| Wed, 01 May 2019 14:40:51 +0100 |
Chris Cannam |
Don't discard large wheel deltas; just clamp them
single-point
|
| Wed, 01 May 2019 11:46:09 +0100 |
Chris Cannam |
Some debug bits
single-point
|
| Tue, 30 Apr 2019 15:53:21 +0100 |
Chris Cannam |
Add option to make pane sizes auto-resize-only (i.e. remove user control via a splitter); also place alignment views above panes instead of below, meaning the extra bit of space that we currently have for the pane without one at least goes to the primary pane
single-point
|
| Tue, 30 Apr 2019 14:02:32 +0100 |
Chris Cannam |
Shrink alignment panes to sensible size on non-hi-dpi screens
single-point
|
| Tue, 30 Apr 2019 14:02:03 +0100 |
Chris Cannam |
Add getNearbyColourIndex to ColourDatabase; tweak getContrastingColour for bright colours; add comments
single-point
|
| Thu, 25 Apr 2019 17:07:04 +0100 |
Chris Cannam |
Avoid showing final (useless) alignment view
single-point
|
| Wed, 24 Apr 2019 15:42:35 +0100 |
Chris Cannam |
Make AudioDial a bit more visible with a dark background
single-point
|
| Wed, 24 Apr 2019 11:45:02 +0100 |
Chris Cannam |
Merge from default branch
single-point
|
| Wed, 24 Apr 2019 11:29:53 +0100 |
Chris Cannam |
Comment
|
| Tue, 23 Apr 2019 16:17:33 +0100 |
Chris Cannam |
Add function to request multiple filenames
|
| Thu, 28 Mar 2019 11:55:31 +0000 |
Chris Cannam |
Update to using export IDs stored in XmlExportables
single-point
|
| Fri, 22 Mar 2019 17:49:15 +0000 |
Chris Cannam |
Use updated ImageModel
single-point
|
| Fri, 22 Mar 2019 11:05:11 +0000 |
Chris Cannam |
Use updated TextModel
single-point
|
| Thu, 21 Mar 2019 15:22:19 +0000 |
Chris Cannam |
Fix tendency of start position of measure rect to wander as you drag out the rect (at certain zoom resolutions)
single-point
|
| Thu, 21 Mar 2019 15:25:05 +0000 |
Chris Cannam |
Merge
|
| Thu, 21 Mar 2019 15:22:20 +0000 |
Chris Cannam |
Fix tendency of start position of measure rect to wander as you drag out the rec
|
| Thu, 21 Mar 2019 13:34:08 +0000 |
Chris Cannam |
Updates for SparseOneDimensionalModel in new API
single-point
|
| Wed, 20 Mar 2019 15:46:17 +0000 |
Chris Cannam |
Further snap fixes
single-point
|
| Wed, 20 Mar 2019 14:59:34 +0000 |
Chris Cannam |
Begin fixing the various snap operations. Also remove SnapNearest, which is never used and seems to consume more lines of code than the rest!
single-point
|
| Wed, 20 Mar 2019 11:18:45 +0000 |
Chris Cannam |
Use overspill to render time-value point line properly at edges
single-point
|
| Tue, 19 Mar 2019 13:06:35 +0000 |
Chris Cannam |
Update TimeValueLayer etc
single-point
|
| Fri, 15 Mar 2019 14:24:22 +0000 |
Chris Cannam |
Update RegionLayer to updated RegionModel
single-point
|
| Fri, 15 Mar 2019 11:09:17 +0000 |
Chris Cannam |
Update to use external set of commands
single-point
|
| Thu, 14 Mar 2019 15:32:58 +0000 |
Chris Cannam |
Update following FlexiNoteModel removal, using new NoteModel API where flexi was previously used
single-point
|
| Thu, 14 Mar 2019 13:12:25 +0000 |
Chris Cannam |
Finish updating NoteLayer to single-point API
single-point
|
| Wed, 13 Mar 2019 16:00:55 +0000 |
Chris Cannam |
Toward getting NoteLayer to work with single-point APIs
single-point
|
| Fri, 08 Mar 2019 13:37:30 +0000 |
Chris Cannam |
Update to Event api in place of Clipboard points
single-point
|
| Tue, 05 Mar 2019 10:02:48 +0000 |
Chris Cannam |
Keep the point being edited highlighted while the edit dialog is open
|
