Mon, 16 Sep 2019 13:34:56 +0100 |
Chris Cannam |
Comment
|
Fri, 13 Sep 2019 17:40:59 +0100 |
Chris Cannam |
Fix, I think, #1914 Mounting rounding error when dragging aligned view left/right - and therefore the associated #1874 Pointer position becomes increasingly erroneous when rewinding with alignment active
|
Fri, 13 Sep 2019 17:27:14 +0100 |
Chris Cannam |
Debug updates
|
Fri, 13 Sep 2019 17:26:11 +0100 |
Chris Cannam |
Debug changes
|
Thu, 12 Sep 2019 13:50:24 +0100 |
Chris Cannam |
Only set maximum frequency on FFT model when in a special verticallyFixed mode
|
Thu, 12 Sep 2019 11:53:40 +0100 |
Chris Cannam |
Set maximum frequency on FFT model to reduce cache size (experimental)
|
Thu, 12 Sep 2019 11:53:17 +0100 |
Chris Cannam |
Pass the cache pointer through rather than looking it up afresh from the model id for each column
|
Wed, 11 Sep 2019 20:36:04 +0100 |
Chris Cannam |
Generate peak cache directly from model, not from whole-model cache (which turns out to be very slow for large models)
|
Wed, 11 Sep 2019 11:21:00 +0100 |
Chris Cannam |
More debug bits
|
Tue, 10 Sep 2019 16:35:28 +0100 |
Chris Cannam |
Debug concerns
|
Wed, 04 Sep 2019 17:31:21 +0100 |
Chris Cannam |
Indentation
|
Thu, 15 Aug 2019 18:18:22 +0100 |
Chris Cannam |
Show relative pitch if recorded
|
Wed, 14 Aug 2019 10:58:24 +0100 |
Chris Cannam |
Separate out handling of alignment progress bar from the layer progress bars and fix tendency to have them hanging around even when alignment has completed
|
Tue, 13 Aug 2019 15:10:32 +0100 |
Chris Cannam |
Toward trying to figure out a progress-bar problem
|
Tue, 13 Aug 2019 14:35:29 +0100 |
Chris Cannam |
Ensure rightCropFrame doesn't end up rounded to the left of the desired end pixel
|
Fri, 09 Aug 2019 19:02:51 +0100 |
Chris Cannam |
Improve drawn alignment of lines in AlignmentView against the view below; also cache the mapping locations
|
Thu, 08 Aug 2019 13:33:38 +0100 |
Chris Cannam |
Debug
|
Thu, 08 Aug 2019 13:33:30 +0100 |
Chris Cannam |
Fix overlooked alignment
|
Fri, 02 Aug 2019 16:44:32 +0100 |
Chris Cannam |
Attempt a mechanism for the View to time-align a layer on display using an aligning version of the ViewProxy
|
Fri, 02 Aug 2019 16:42:32 +0100 |
Chris Cannam |
Add direct method to get source model
|
Fri, 19 Jul 2019 16:10:19 +0100 |
Chris Cannam |
Correct erroneous signal signature
|
Thu, 18 Jul 2019 13:18:19 +0100 |
Chris Cannam |
Fix failure to show alignment progress bar
|
Wed, 17 Jul 2019 14:25:16 +0100 |
Chris Cannam |
Merge from branch by-id
|
Wed, 17 Jul 2019 13:12:56 +0100 |
Chris Cannam |
Tidy; also don't show cancel buttons for alignments
by-id
|
Wed, 17 Jul 2019 11:20:08 +0100 |
Chris Cannam |
Fix inability to set layer's model to None
by-id
|
Mon, 15 Jul 2019 13:49:57 +0100 |
Chris Cannam |
Emit a signal when a cancel is pressed
by-id
|
Fri, 12 Jul 2019 16:29:59 +0100 |
Chris Cannam |
Comment
by-id
|
Fri, 05 Jul 2019 15:34:50 +0100 |
Chris Cannam |
Update for removal of (public) getId from Model
by-id
|
Thu, 04 Jul 2019 18:04:44 +0100 |
Chris Cannam |
Update for changes to PlayParameters
by-id
|
Wed, 03 Jul 2019 14:20:42 +0100 |
Chris Cannam |
Further ModelId updates
by-id
|
Wed, 03 Jul 2019 08:55:02 +0100 |
Chris Cannam |
Fix a number of Qt deprecation warnings
by-id
|
Tue, 02 Jul 2019 19:05:45 +0100 |
Chris Cannam |
Further ModelId updates
by-id
|
Tue, 02 Jul 2019 15:38:37 +0100 |
Chris Cannam |
Couple more updates
by-id
|
Tue, 02 Jul 2019 15:29:17 +0100 |
Chris Cannam |
Further layer updates
by-id
|
Tue, 02 Jul 2019 14:08:44 +0100 |
Chris Cannam |
Further layer updates for ModelById
by-id
|
Tue, 02 Jul 2019 11:49:52 +0100 |
Chris Cannam |
Further layer updates for ModelById
by-id
|
Mon, 01 Jul 2019 14:25:53 +0100 |
Chris Cannam |
Further layer updates
by-id
|
Mon, 01 Jul 2019 14:17:13 +0100 |
Chris Cannam |
More layer updates
by-id
|
Fri, 28 Jun 2019 17:37:22 +0100 |
Chris Cannam |
Further layer updates for ById
by-id
|
Thu, 27 Jun 2019 13:16:25 +0100 |
Chris Cannam |
Some work on updating layers for ModelId bits
by-id
|
Thu, 13 Jun 2019 15:35:01 +0100 |
Chris Cannam |
Add opportunistic-editing toggle
|
Thu, 13 Jun 2019 15:05:25 +0100 |
Chris Cannam |
Don't try to draw scale from a dormant layer!
|
Fri, 24 May 2019 15:14:09 +0100 |
Chris Cannam |
Merge
|
Fri, 24 May 2019 15:13:57 +0100 |
Chris Cannam |
Don't attempt performance alignment when not in align mode
|
Fri, 24 May 2019 14:29:19 +0100 |
Chris Cannam |
Fix incorrect frequency display in peak-freq mode
|
Wed, 22 May 2019 15:40:19 +0100 |
Chris Cannam |
Branch
3.3-stable
|
Mon, 20 May 2019 15:04:32 +0100 |
Chris Cannam |
Fix incorrect visibility of alignment view when not requested; fix current indicator size when x-button is disabled
|
Mon, 20 May 2019 15:04:07 +0100 |
Chris Cannam |
Fix incorrect repaint at left edge in segmentation mode
|
Fri, 17 May 2019 14:37:02 +0100 |
Chris Cannam |
Add option to suppress close button on first pane
|
Fri, 17 May 2019 10:02:52 +0100 |
Chris Cannam |
Merge from branch single-point
|
Thu, 16 May 2019 15:50:11 +0100 |
Chris Cannam |
Make it possible to disable cancel buttons
single-point
|
Thu, 16 May 2019 15:50:02 +0100 |
Chris Cannam |
Avoid showing progress bars for dormant layers. They'll typically be duplicates, e.g. in the vect app you can get many dormant layers all reporting the alignment completion at the same time. (Maybe it would be better just to reject progress bars for alignment in dormant layers? Hm)
single-point
|
Fri, 10 May 2019 15:50:51 +0100 |
Chris Cannam |
Comment
single-point
|
Fri, 10 May 2019 09:22:20 +0100 |
Chris Cannam |
Add setLayerProperties (from XML string)
single-point
|
Fri, 10 May 2019 08:44:32 +0100 |
Chris Cannam |
Remove margin from inner frame
single-point
|
Thu, 09 May 2019 13:42:18 +0100 |
Chris Cannam |
Smoother cache & colour management in colour 3d plots
single-point
|
Fri, 03 May 2019 17:45:39 +0100 |
Chris Cannam |
Make inversion configurable in settings
single-point
|
Wed, 01 May 2019 15:15:26 +0100 |
Chris Cannam |
When invalidating cache in a time-constrained context, don't start rendering in the same cycle as well - leave it for a further update. Slightly experimental effort to make the UI feel more responsive.
single-point
|
Wed, 01 May 2019 14:41:28 +0100 |
Chris Cannam |
Tweak peak-cache allocations etc in the hope of making long spectrograms a little faster to re-render
single-point
|
Wed, 01 May 2019 14:40:51 +0100 |
Chris Cannam |
Don't discard large wheel deltas; just clamp them
single-point
|
Wed, 01 May 2019 11:46:09 +0100 |
Chris Cannam |
Some debug bits
single-point
|
Tue, 30 Apr 2019 15:53:21 +0100 |
Chris Cannam |
Add option to make pane sizes auto-resize-only (i.e. remove user control via a splitter); also place alignment views above panes instead of below, meaning the extra bit of space that we currently have for the pane without one at least goes to the primary pane
single-point
|
Tue, 30 Apr 2019 14:02:32 +0100 |
Chris Cannam |
Shrink alignment panes to sensible size on non-hi-dpi screens
single-point
|
Tue, 30 Apr 2019 14:02:03 +0100 |
Chris Cannam |
Add getNearbyColourIndex to ColourDatabase; tweak getContrastingColour for bright colours; add comments
single-point
|
Thu, 25 Apr 2019 17:07:04 +0100 |
Chris Cannam |
Avoid showing final (useless) alignment view
single-point
|
Wed, 24 Apr 2019 15:42:35 +0100 |
Chris Cannam |
Make AudioDial a bit more visible with a dark background
single-point
|
Wed, 24 Apr 2019 11:45:02 +0100 |
Chris Cannam |
Merge from default branch
single-point
|
Wed, 24 Apr 2019 11:29:53 +0100 |
Chris Cannam |
Comment
|
Tue, 23 Apr 2019 16:17:33 +0100 |
Chris Cannam |
Add function to request multiple filenames
|
Thu, 28 Mar 2019 11:55:31 +0000 |
Chris Cannam |
Update to using export IDs stored in XmlExportables
single-point
|
Fri, 22 Mar 2019 17:49:15 +0000 |
Chris Cannam |
Use updated ImageModel
single-point
|
Fri, 22 Mar 2019 11:05:11 +0000 |
Chris Cannam |
Use updated TextModel
single-point
|
Thu, 21 Mar 2019 15:22:19 +0000 |
Chris Cannam |
Fix tendency of start position of measure rect to wander as you drag out the rect (at certain zoom resolutions)
single-point
|
Thu, 21 Mar 2019 15:25:05 +0000 |
Chris Cannam |
Merge
|
Thu, 21 Mar 2019 15:22:20 +0000 |
Chris Cannam |
Fix tendency of start position of measure rect to wander as you drag out the rec
|
Thu, 21 Mar 2019 13:34:08 +0000 |
Chris Cannam |
Updates for SparseOneDimensionalModel in new API
single-point
|
Wed, 20 Mar 2019 15:46:17 +0000 |
Chris Cannam |
Further snap fixes
single-point
|
Wed, 20 Mar 2019 14:59:34 +0000 |
Chris Cannam |
Begin fixing the various snap operations. Also remove SnapNearest, which is never used and seems to consume more lines of code than the rest!
single-point
|
Wed, 20 Mar 2019 11:18:45 +0000 |
Chris Cannam |
Use overspill to render time-value point line properly at edges
single-point
|
Tue, 19 Mar 2019 13:06:35 +0000 |
Chris Cannam |
Update TimeValueLayer etc
single-point
|
Fri, 15 Mar 2019 14:24:22 +0000 |
Chris Cannam |
Update RegionLayer to updated RegionModel
single-point
|
Fri, 15 Mar 2019 11:09:17 +0000 |
Chris Cannam |
Update to use external set of commands
single-point
|
Thu, 14 Mar 2019 15:32:58 +0000 |
Chris Cannam |
Update following FlexiNoteModel removal, using new NoteModel API where flexi was previously used
single-point
|
Thu, 14 Mar 2019 13:12:25 +0000 |
Chris Cannam |
Finish updating NoteLayer to single-point API
single-point
|
Wed, 13 Mar 2019 16:00:55 +0000 |
Chris Cannam |
Toward getting NoteLayer to work with single-point APIs
single-point
|
Fri, 08 Mar 2019 13:37:30 +0000 |
Chris Cannam |
Update to Event api in place of Clipboard points
single-point
|
Tue, 05 Mar 2019 10:02:48 +0000 |
Chris Cannam |
Keep the point being edited highlighted while the edit dialog is open
|
Mon, 18 Feb 2019 14:33:35 +0000 |
Chris Cannam |
Fix inadvertent hardcoding of SV file extension
|
Thu, 14 Feb 2019 13:12:44 +0000 |
Chris Cannam |
Merge
|
Thu, 14 Feb 2019 13:12:36 +0000 |
Chris Cannam |
Comments
|
Thu, 14 Feb 2019 13:04:57 +0000 |
Chris Cannam |
Use zero-width pen when zoomed out - this seems to make a huge difference to speed when rendering on top of another layer, for some reason
|
Wed, 23 Jan 2019 14:44:16 +0000 |
Chris Cannam |
Merge
|
Mon, 21 Jan 2019 10:08:26 +0000 |
Chris Cannam |
Fix potential divide-by-zero
|
Mon, 21 Jan 2019 10:07:36 +0000 |
Chris Cannam |
Avoid compiler warning
|
Wed, 09 Jan 2019 15:24:51 +0000 |
Chris Cannam |
Merge from branch fix-static-analysis
|
Wed, 09 Jan 2019 14:41:52 +0000 |
Chris Cannam |
Support changing the separator (if more than one plausible one is found) and repopulating the dialog
|
Wed, 19 Dec 2018 10:40:17 +0000 |
Chris Cannam |
Debug tweaks
|
Wed, 19 Dec 2018 10:40:09 +0000 |
Chris Cannam |
Sample a column only if it is set (avoids flash of mis-ranged material when scrolling with view normalisation on)
|
Tue, 04 Dec 2018 13:49:09 +0000 |
Chris Cannam |
Merge from default branch
fix-static-analysis
|
Thu, 29 Nov 2018 11:57:30 +0000 |
Chris Cannam |
Fix erasing of Region layer labels as the playhead moves over them
|
Mon, 26 Nov 2018 14:33:54 +0000 |
Chris Cannam |
Use nullptr throughout
fix-static-analysis
|
Mon, 26 Nov 2018 13:52:57 +0000 |
Chris Cannam |
Header guards
fix-static-analysis
|
Mon, 26 Nov 2018 13:52:27 +0000 |
Chris Cannam |
Use override throughout
fix-static-analysis
|
Thu, 22 Nov 2018 14:55:38 +0000 |
Chris Cannam |
Fixes from clang modernize-use-override
fix-static-analysis
|
Fri, 16 Nov 2018 09:01:38 +0000 |
Chris Cannam |
Make horizontal wheeling a bit less crazily fast in the absence of fine delta information
|
Thu, 15 Nov 2018 15:08:08 +0000 |
Chris Cannam |
Retain consistent min freq (rather than min bin no) when changing fft parameters in spectrum; scale ffts by window size rather than fft size in case of oversampling, to avoid fading out because of scale factor including zero padding
|
Thu, 15 Nov 2018 14:18:26 +0000 |
Chris Cannam |
Handle integer pixel scaling as well
|
Thu, 15 Nov 2018 14:04:32 +0000 |
Chris Cannam |
Scale pen for retina display on macOS as well as for hidpi display elsewhere
|
Thu, 15 Nov 2018 13:06:38 +0000 |
Chris Cannam |
Different approach to x-coord calculation in slice layer - let's acknowledge that we really do have two different types of model, those whose "bins" are actually at a single value (frequency in the case of the spectrum) and those whose bins are just labels.
|
Wed, 14 Nov 2018 15:47:21 +0000 |
Chris Cannam |
Fixes to spectrum axis calculations, + default to starting at bin 1
|
Wed, 14 Nov 2018 15:14:21 +0000 |
Chris Cannam |
We need to draw illumination label *after* the spectrum...
|
Wed, 14 Nov 2018 15:04:04 +0000 |
Chris Cannam |
Fix some incorrect pixel scaling
|