| Fri, 13 Sep 2019 17:26:11 +0100 |
Chris Cannam |
Debug changes
|
| Thu, 12 Sep 2019 13:50:24 +0100 |
Chris Cannam |
Only set maximum frequency on FFT model when in a special verticallyFixed mode
|
| Thu, 12 Sep 2019 11:53:40 +0100 |
Chris Cannam |
Set maximum frequency on FFT model to reduce cache size (experimental)
|
| Thu, 12 Sep 2019 11:53:17 +0100 |
Chris Cannam |
Pass the cache pointer through rather than looking it up afresh from the model id for each column
|
| Wed, 11 Sep 2019 20:36:04 +0100 |
Chris Cannam |
Generate peak cache directly from model, not from whole-model cache (which turns out to be very slow for large models)
|
| Wed, 11 Sep 2019 11:21:00 +0100 |
Chris Cannam |
More debug bits
|
| Tue, 10 Sep 2019 16:35:28 +0100 |
Chris Cannam |
Debug concerns
|
| Wed, 04 Sep 2019 17:31:21 +0100 |
Chris Cannam |
Indentation
|
| Thu, 15 Aug 2019 18:18:22 +0100 |
Chris Cannam |
Show relative pitch if recorded
|
| Wed, 14 Aug 2019 10:58:24 +0100 |
Chris Cannam |
Separate out handling of alignment progress bar from the layer progress bars and fix tendency to have them hanging around even when alignment has completed
|
| Tue, 13 Aug 2019 15:10:32 +0100 |
Chris Cannam |
Toward trying to figure out a progress-bar problem
|
| Tue, 13 Aug 2019 14:35:29 +0100 |
Chris Cannam |
Ensure rightCropFrame doesn't end up rounded to the left of the desired end pixel
|
| Fri, 09 Aug 2019 19:02:51 +0100 |
Chris Cannam |
Improve drawn alignment of lines in AlignmentView against the view below; also cache the mapping locations
|
| Thu, 08 Aug 2019 13:33:38 +0100 |
Chris Cannam |
Debug
|
| Thu, 08 Aug 2019 13:33:30 +0100 |
Chris Cannam |
Fix overlooked alignment
|
| Fri, 02 Aug 2019 16:44:32 +0100 |
Chris Cannam |
Attempt a mechanism for the View to time-align a layer on display using an aligning version of the ViewProxy
|
| Fri, 02 Aug 2019 16:42:32 +0100 |
Chris Cannam |
Add direct method to get source model
|
| Fri, 19 Jul 2019 16:10:19 +0100 |
Chris Cannam |
Correct erroneous signal signature
|
| Thu, 18 Jul 2019 13:18:19 +0100 |
Chris Cannam |
Fix failure to show alignment progress bar
|
| Wed, 17 Jul 2019 14:25:16 +0100 |
Chris Cannam |
Merge from branch by-id
|
| Wed, 17 Jul 2019 13:12:56 +0100 |
Chris Cannam |
Tidy; also don't show cancel buttons for alignments
by-id
|
| Wed, 17 Jul 2019 11:20:08 +0100 |
Chris Cannam |
Fix inability to set layer's model to None
by-id
|
| Mon, 15 Jul 2019 13:49:57 +0100 |
Chris Cannam |
Emit a signal when a cancel is pressed
by-id
|
| Fri, 12 Jul 2019 16:29:59 +0100 |
Chris Cannam |
Comment
by-id
|
| Fri, 05 Jul 2019 15:34:50 +0100 |
Chris Cannam |
Update for removal of (public) getId from Model
by-id
|
| Thu, 04 Jul 2019 18:04:44 +0100 |
Chris Cannam |
Update for changes to PlayParameters
by-id
|
| Wed, 03 Jul 2019 14:20:42 +0100 |
Chris Cannam |
Further ModelId updates
by-id
|
| Wed, 03 Jul 2019 08:55:02 +0100 |
Chris Cannam |
Fix a number of Qt deprecation warnings
by-id
|
| Tue, 02 Jul 2019 19:05:45 +0100 |
Chris Cannam |
Further ModelId updates
by-id
|
| Tue, 02 Jul 2019 15:38:37 +0100 |
Chris Cannam |
Couple more updates
by-id
|
| Tue, 02 Jul 2019 15:29:17 +0100 |
Chris Cannam |
Further layer updates
by-id
|
| Tue, 02 Jul 2019 14:08:44 +0100 |
Chris Cannam |
Further layer updates for ModelById
by-id
|
| Tue, 02 Jul 2019 11:49:52 +0100 |
Chris Cannam |
Further layer updates for ModelById
by-id
|
| Mon, 01 Jul 2019 14:25:53 +0100 |
Chris Cannam |
Further layer updates
by-id
|
| Mon, 01 Jul 2019 14:17:13 +0100 |
Chris Cannam |
More layer updates
by-id
|
| Fri, 28 Jun 2019 17:37:22 +0100 |
Chris Cannam |
Further layer updates for ById
by-id
|
| Thu, 27 Jun 2019 13:16:25 +0100 |
Chris Cannam |
Some work on updating layers for ModelId bits
by-id
|
| Thu, 13 Jun 2019 15:35:01 +0100 |
Chris Cannam |
Add opportunistic-editing toggle
|
| Thu, 13 Jun 2019 15:05:25 +0100 |
Chris Cannam |
Don't try to draw scale from a dormant layer!
|
| Fri, 24 May 2019 15:14:09 +0100 |
Chris Cannam |
Merge
|
| Fri, 24 May 2019 15:13:57 +0100 |
Chris Cannam |
Don't attempt performance alignment when not in align mode
|
| Fri, 24 May 2019 14:29:19 +0100 |
Chris Cannam |
Fix incorrect frequency display in peak-freq mode
|
| Wed, 22 May 2019 15:40:19 +0100 |
Chris Cannam |
Branch
3.3-stable
|
| Mon, 20 May 2019 15:04:32 +0100 |
Chris Cannam |
Fix incorrect visibility of alignment view when not requested; fix current indicator size when x-button is disabled
|
| Mon, 20 May 2019 15:04:07 +0100 |
Chris Cannam |
Fix incorrect repaint at left edge in segmentation mode
|
| Fri, 17 May 2019 14:37:02 +0100 |
Chris Cannam |
Add option to suppress close button on first pane
|
| Fri, 17 May 2019 10:02:52 +0100 |
Chris Cannam |
Merge from branch single-point
|
| Thu, 16 May 2019 15:50:11 +0100 |
Chris Cannam |
Make it possible to disable cancel buttons
single-point
|
| Thu, 16 May 2019 15:50:02 +0100 |
Chris Cannam |
Avoid showing progress bars for dormant layers. They'll typically be duplicates, e.g. in the vect app you can get many dormant layers all reporting the alignment completion at the same time. (Maybe it would be better just to reject progress bars for alignment in dormant layers? Hm)
single-point
|
| Fri, 10 May 2019 15:50:51 +0100 |
Chris Cannam |
Comment
single-point
|
| Fri, 10 May 2019 09:22:20 +0100 |
Chris Cannam |
Add setLayerProperties (from XML string)
single-point
|
| Fri, 10 May 2019 08:44:32 +0100 |
Chris Cannam |
Remove margin from inner frame
single-point
|
| Thu, 09 May 2019 13:42:18 +0100 |
Chris Cannam |
Smoother cache & colour management in colour 3d plots
single-point
|
| Fri, 03 May 2019 17:45:39 +0100 |
Chris Cannam |
Make inversion configurable in settings
single-point
|
| Wed, 01 May 2019 15:15:26 +0100 |
Chris Cannam |
When invalidating cache in a time-constrained context, don't start rendering in the same cycle as well - leave it for a further update. Slightly experimental effort to make the UI feel more responsive.
single-point
|
| Wed, 01 May 2019 14:41:28 +0100 |
Chris Cannam |
Tweak peak-cache allocations etc in the hope of making long spectrograms a little faster to re-render
single-point
|
| Wed, 01 May 2019 14:40:51 +0100 |
Chris Cannam |
Don't discard large wheel deltas; just clamp them
single-point
|
| Wed, 01 May 2019 11:46:09 +0100 |
Chris Cannam |
Some debug bits
single-point
|
| Tue, 30 Apr 2019 15:53:21 +0100 |
Chris Cannam |
Add option to make pane sizes auto-resize-only (i.e. remove user control via a splitter); also place alignment views above panes instead of below, meaning the extra bit of space that we currently have for the pane without one at least goes to the primary pane
single-point
|
| Tue, 30 Apr 2019 14:02:32 +0100 |
Chris Cannam |
Shrink alignment panes to sensible size on non-hi-dpi screens
single-point
|
| Tue, 30 Apr 2019 14:02:03 +0100 |
Chris Cannam |
Add getNearbyColourIndex to ColourDatabase; tweak getContrastingColour for bright colours; add comments
single-point
|
| Thu, 25 Apr 2019 17:07:04 +0100 |
Chris Cannam |
Avoid showing final (useless) alignment view
single-point
|
| Wed, 24 Apr 2019 15:42:35 +0100 |
Chris Cannam |
Make AudioDial a bit more visible with a dark background
single-point
|
| Wed, 24 Apr 2019 11:45:02 +0100 |
Chris Cannam |
Merge from default branch
single-point
|
| Wed, 24 Apr 2019 11:29:53 +0100 |
Chris Cannam |
Comment
|
| Tue, 23 Apr 2019 16:17:33 +0100 |
Chris Cannam |
Add function to request multiple filenames
|
| Thu, 28 Mar 2019 11:55:31 +0000 |
Chris Cannam |
Update to using export IDs stored in XmlExportables
single-point
|
| Fri, 22 Mar 2019 17:49:15 +0000 |
Chris Cannam |
Use updated ImageModel
single-point
|
| Fri, 22 Mar 2019 11:05:11 +0000 |
Chris Cannam |
Use updated TextModel
single-point
|
| Thu, 21 Mar 2019 15:22:19 +0000 |
Chris Cannam |
Fix tendency of start position of measure rect to wander as you drag out the rect (at certain zoom resolutions)
single-point
|
| Thu, 21 Mar 2019 15:25:05 +0000 |
Chris Cannam |
Merge
|
| Thu, 21 Mar 2019 15:22:20 +0000 |
Chris Cannam |
Fix tendency of start position of measure rect to wander as you drag out the rec
|
| Thu, 21 Mar 2019 13:34:08 +0000 |
Chris Cannam |
Updates for SparseOneDimensionalModel in new API
single-point
|
| Wed, 20 Mar 2019 15:46:17 +0000 |
Chris Cannam |
Further snap fixes
single-point
|
| Wed, 20 Mar 2019 14:59:34 +0000 |
Chris Cannam |
Begin fixing the various snap operations. Also remove SnapNearest, which is never used and seems to consume more lines of code than the rest!
single-point
|
| Wed, 20 Mar 2019 11:18:45 +0000 |
Chris Cannam |
Use overspill to render time-value point line properly at edges
single-point
|
| Tue, 19 Mar 2019 13:06:35 +0000 |
Chris Cannam |
Update TimeValueLayer etc
single-point
|
| Fri, 15 Mar 2019 14:24:22 +0000 |
Chris Cannam |
Update RegionLayer to updated RegionModel
single-point
|
| Fri, 15 Mar 2019 11:09:17 +0000 |
Chris Cannam |
Update to use external set of commands
single-point
|
| Thu, 14 Mar 2019 15:32:58 +0000 |
Chris Cannam |
Update following FlexiNoteModel removal, using new NoteModel API where flexi was previously used
single-point
|
| Thu, 14 Mar 2019 13:12:25 +0000 |
Chris Cannam |
Finish updating NoteLayer to single-point API
single-point
|
| Wed, 13 Mar 2019 16:00:55 +0000 |
Chris Cannam |
Toward getting NoteLayer to work with single-point APIs
single-point
|
| Fri, 08 Mar 2019 13:37:30 +0000 |
Chris Cannam |
Update to Event api in place of Clipboard points
single-point
|
| Tue, 05 Mar 2019 10:02:48 +0000 |
Chris Cannam |
Keep the point being edited highlighted while the edit dialog is open
|
| Mon, 18 Feb 2019 14:33:35 +0000 |
Chris Cannam |
Fix inadvertent hardcoding of SV file extension
|
| Thu, 14 Feb 2019 13:12:44 +0000 |
Chris Cannam |
Merge
|
| Thu, 14 Feb 2019 13:12:36 +0000 |
Chris Cannam |
Comments
|
| Thu, 14 Feb 2019 13:04:57 +0000 |
Chris Cannam |
Use zero-width pen when zoomed out - this seems to make a huge difference to speed when rendering on top of another layer, for some reason
|
| Wed, 23 Jan 2019 14:44:16 +0000 |
Chris Cannam |
Merge
|
| Mon, 21 Jan 2019 10:08:26 +0000 |
Chris Cannam |
Fix potential divide-by-zero
|
| Mon, 21 Jan 2019 10:07:36 +0000 |
Chris Cannam |
Avoid compiler warning
|
| Wed, 09 Jan 2019 15:24:51 +0000 |
Chris Cannam |
Merge from branch fix-static-analysis
|
| Wed, 09 Jan 2019 14:41:52 +0000 |
Chris Cannam |
Support changing the separator (if more than one plausible one is found) and repopulating the dialog
|
| Wed, 19 Dec 2018 10:40:17 +0000 |
Chris Cannam |
Debug tweaks
|
| Wed, 19 Dec 2018 10:40:09 +0000 |
Chris Cannam |
Sample a column only if it is set (avoids flash of mis-ranged material when scrolling with view normalisation on)
|
| Tue, 04 Dec 2018 13:49:09 +0000 |
Chris Cannam |
Merge from default branch
fix-static-analysis
|
| Thu, 29 Nov 2018 11:57:30 +0000 |
Chris Cannam |
Fix erasing of Region layer labels as the playhead moves over them
|
| Mon, 26 Nov 2018 14:33:54 +0000 |
Chris Cannam |
Use nullptr throughout
fix-static-analysis
|
| Mon, 26 Nov 2018 13:52:57 +0000 |
Chris Cannam |
Header guards
fix-static-analysis
|
| Mon, 26 Nov 2018 13:52:27 +0000 |
Chris Cannam |
Use override throughout
fix-static-analysis
|
| Thu, 22 Nov 2018 14:55:38 +0000 |
Chris Cannam |
Fixes from clang modernize-use-override
fix-static-analysis
|
| Fri, 16 Nov 2018 09:01:38 +0000 |
Chris Cannam |
Make horizontal wheeling a bit less crazily fast in the absence of fine delta information
|
| Thu, 15 Nov 2018 15:08:08 +0000 |
Chris Cannam |
Retain consistent min freq (rather than min bin no) when changing fft parameters in spectrum; scale ffts by window size rather than fft size in case of oversampling, to avoid fading out because of scale factor including zero padding
|
| Thu, 15 Nov 2018 14:18:26 +0000 |
Chris Cannam |
Handle integer pixel scaling as well
|
| Thu, 15 Nov 2018 14:04:32 +0000 |
Chris Cannam |
Scale pen for retina display on macOS as well as for hidpi display elsewhere
|
| Thu, 15 Nov 2018 13:06:38 +0000 |
Chris Cannam |
Different approach to x-coord calculation in slice layer - let's acknowledge that we really do have two different types of model, those whose "bins" are actually at a single value (frequency in the case of the spectrum) and those whose bins are just labels.
|
| Wed, 14 Nov 2018 15:47:21 +0000 |
Chris Cannam |
Fixes to spectrum axis calculations, + default to starting at bin 1
|
| Wed, 14 Nov 2018 15:14:21 +0000 |
Chris Cannam |
We need to draw illumination label *after* the spectrum...
|
| Wed, 14 Nov 2018 15:04:04 +0000 |
Chris Cannam |
Fix some incorrect pixel scaling
|
| Wed, 14 Nov 2018 14:29:08 +0000 |
Chris Cannam |
Fix compiler warning
|
| Wed, 14 Nov 2018 14:23:17 +0000 |
Chris Cannam |
Merge from branch spectrogramparam
|
| Wed, 14 Nov 2018 14:17:06 +0000 |
Chris Cannam |
Various tweaks & fixes to log-scale handling in spectrum. We can't easily preserve the nice behaviour where peaks stay in place as fft size changes, without potentially losing a bit of low-frequency information
spectrogramparam
|
| Wed, 14 Nov 2018 14:16:06 +0000 |
Chris Cannam |
Correct positioning for centre line when antialiasing with non-0-width pen
spectrogramparam
|
| Wed, 14 Nov 2018 11:01:18 +0000 |
Chris Cannam |
Highlight the current peak line in the spectrum (when shown); also a fix to the crosshair labelling
spectrogramparam
|
| Tue, 13 Nov 2018 15:16:48 +0000 |
Chris Cannam |
Toward highlighting peaks on spectrum
spectrogramparam
|
| Tue, 13 Nov 2018 14:48:42 +0000 |
Chris Cannam |
Move layer name text up a bit when rendering on a layer with a horizontal scale (i.e. spectrum)
spectrogramparam
|
| Tue, 13 Nov 2018 14:06:48 +0000 |
Chris Cannam |
Make "zoom to region" work sensibly for slice/spectrum layers; ensure that min/max bin are remapped properly when changing fft size
spectrogramparam
|
| Tue, 13 Nov 2018 13:39:01 +0000 |
Chris Cannam |
Make mention of the shift-drag feature and zooming in the status text
spectrogramparam
|
| Mon, 12 Nov 2018 14:48:42 +0000 |
Chris Cannam |
Small speedups
spectrogramparam
|
| Mon, 12 Nov 2018 11:34:34 +0000 |
Chris Cannam |
Use log-frequency rather than log-bin for calculating x coord in spectrum. This has the advantage that frequency positions don't move when we change the window size or oversampling ratio, but it does give us an unhelpfully large amount of space for very low frequencies - to be considered
spectrogramparam
|
| Thu, 08 Nov 2018 12:55:36 +0000 |
Chris Cannam |
Retrieve only the values already determined to be peaks
spectrogramparam
|
| Thu, 08 Nov 2018 11:12:04 +0000 |
Chris Cannam |
Fix "colour" rendering for spectrum (now resembles a filled "line" mode rather than a filled "block" mode)
spectrogramparam
|
| Wed, 07 Nov 2018 15:59:10 +0000 |
Chris Cannam |
Switch spectrum to antialiased drawing with considerable speedup for the dense areas; take horizontal scale height into account when rendering slice layer height
spectrogramparam
|
| Wed, 07 Nov 2018 11:37:51 +0000 |
Chris Cannam |
Add oversampling option to spectrum as well
spectrogramparam
|
| Tue, 06 Nov 2018 15:42:35 +0000 |
Chris Cannam |
Merge from default branch
spectrogramparam
|
| Tue, 06 Nov 2018 15:42:06 +0000 |
Chris Cannam |
Make the context help for custom controls explain how to reset them
|
| Tue, 06 Nov 2018 13:36:04 +0000 |
Chris Cannam |
Experimental oversampling param
spectrogramparam
|
| Tue, 06 Nov 2018 13:35:47 +0000 |
Chris Cannam |
Avoid nan/inf values (and consequent crash) in colour scale range
|
| Tue, 06 Nov 2018 13:34:56 +0000 |
Chris Cannam |
Use label of property for tooltip, not just id of it
|
| Tue, 06 Nov 2018 11:13:13 +0000 |
Chris Cannam |
Merge from branch zoom
|
| Tue, 06 Nov 2018 10:51:46 +0000 |
Chris Cannam |
Fix incorrect start/end overlay drawing when zoomed far in
zoom
|
| Tue, 06 Nov 2018 08:59:03 +0000 |
Chris Cannam |
Merge from default branch
zoom
|
| Mon, 05 Nov 2018 13:30:21 +0000 |
Chris Cannam |
Scaling tweaks
|
| Fri, 02 Nov 2018 15:23:53 +0000 |
Chris Cannam |
Short-circuit drawing a little bit for contiguous ranges
|
| Fri, 02 Nov 2018 15:23:42 +0000 |
Chris Cannam |
Progressively increase sample-box size slightly
|
| Thu, 01 Nov 2018 15:11:39 +0000 |
Chris Cannam |
Initialise level and pan from current state of layer's parameters (e.g. when reloading session)
waverevision
|
| Thu, 01 Nov 2018 15:11:21 +0000 |
Chris Cannam |
Use a distinguishable text for this state
waverevision
|
| Thu, 01 Nov 2018 10:12:12 +0000 |
Chris Cannam |
Merge branch waverevision
|
| Wed, 31 Oct 2018 15:06:32 +0000 |
Chris Cannam |
Rework waveform renderer to use smooth paths, aiming to get near-pixel-identical results when zoomed out far enough for a single path not to be relevant
waverevision
|
| Tue, 30 Oct 2018 16:23:03 +0000 |
Chris Cannam |
Fix the mix/merge channels behaviour in pixels-per-frame zone
|
| Tue, 30 Oct 2018 15:32:05 +0000 |
Chris Cannam |
Minor tidying
|
| Tue, 30 Oct 2018 15:32:01 +0000 |
Chris Cannam |
Add show-derivative option but, like inverting the colour scale, I don't think it's as useful as I'd hoped
|
| Tue, 30 Oct 2018 14:00:20 +0000 |
Chris Cannam |
Fix inconsistency between centre frame actually set and centre frame notified as set, which caused the start frame location to creep out of place gradually as you page through
|
| Thu, 18 Oct 2018 13:21:56 +0100 |
Chris Cannam |
Add mechanism for saving/loading colour maps by name/id rather than by numerical index, for future compatibility when adding to or changing the supported colour maps. Add two new colour maps (and one old one). Write out backward-compatible numerical indices for use when reloading in older versions. Also add a mechanism to invert the colour map, though I don't think it turns out useful enough to include in the UI.
|
| Fri, 12 Oct 2018 11:17:29 +0100 |
Chris Cannam |
Merge
|
| Fri, 05 Oct 2018 10:25:52 +0100 |
Chris Cannam |
Merge from default branch
zoom
|
| Thu, 11 Oct 2018 18:26:45 +0100 |
Chris Cannam |
Merge
|
| Thu, 11 Oct 2018 18:26:30 +0100 |
Chris Cannam |
Oops, typeof is not standard
|
| Thu, 11 Oct 2018 14:59:34 +0100 |
Chris Cannam |
Rework cacheing logic to reduce the number of reallocations and be more correct about the repaint areas. I don't expect the difference to be really noticeable but in theory performance should be a little better...
|
| Thu, 11 Oct 2018 10:15:45 +0100 |
Chris Cannam |
Fix ugly text positioning/drawing on osx
|
| Wed, 10 Oct 2018 14:50:47 +0100 |
Chris Cannam |
Remove some debug bits
|
| Wed, 10 Oct 2018 14:33:10 +0100 |
Chris Cannam |
Use zoom constraints more consistently, including the new RelativelyFine one
|
| Wed, 10 Oct 2018 08:44:27 +0100 |
Chris Cannam |
Merge from branch zoom
|
| Fri, 05 Oct 2018 09:59:41 +0100 |
Chris Cannam |
Debug tweaks
zoom
|
| Wed, 03 Oct 2018 12:59:55 +0100 |
Chris Cannam |
Scale positioning
|
| Wed, 03 Oct 2018 12:59:47 +0100 |
Chris Cannam |
Use newly-introduced cancel icon instead of fileclose. The deceptive name of fileclose had me thinking nobody was using it, so I removed it and the cancel buttons disappeared
|
| Mon, 01 Oct 2018 15:48:20 +0100 |
Chris Cannam |
Merge from default branch
zoom
|
| Mon, 01 Oct 2018 14:46:36 +0100 |
Chris Cannam |
Avoid blowing up when faced with min==max in parameter range
|
| Mon, 01 Oct 2018 14:37:58 +0100 |
Chris Cannam |
Use locale-aware comparators for sorting user-visible strings
|
| Fri, 28 Sep 2018 18:28:44 +0100 |
Chris Cannam |
Avoid overflow problems when dealing with large numbers of microseconds
zoom
|
| Fri, 28 Sep 2018 12:31:12 +0100 |
Chris Cannam |
Use more precise text rendering when zoomed in beyond the ms level
zoom
|
| Fri, 28 Sep 2018 09:12:54 +0100 |
Chris Cannam |
This is the correct size
zoom
|
| Thu, 27 Sep 2018 16:20:58 +0100 |
Chris Cannam |
Fix crash when scrolling beyond end of waveform (+ fix compiler warnings)
zoom
|
| Thu, 27 Sep 2018 15:54:02 +0100 |
Chris Cannam |
Fix stupidity
zoom
|
| Thu, 27 Sep 2018 15:20:25 +0100 |
Chris Cannam |
Fixes for TimeRuler spacing and for the boundaries of the WaveformLayer paint area
zoom
|
| Wed, 26 Sep 2018 13:03:16 +0100 |
Chris Cannam |
Remove WaveformOversampler again from here; it's now in svcore
zoom
|
| Wed, 26 Sep 2018 11:54:25 +0100 |
Chris Cannam |
Add custom waveform oversampler method
zoom
|
| Tue, 25 Sep 2018 16:38:50 +0100 |
Chris Cannam |
Get oversampled rendering almost working, but I think we need to take more care with the oversampling itself
zoom
|
| Tue, 25 Sep 2018 12:52:08 +0100 |
Chris Cannam |
Fix accidental always-auto-normalise
zoom
|
| Mon, 24 Sep 2018 14:40:48 +0100 |
Chris Cannam |
Toward oversampling rendering
zoom
|
| Fri, 21 Sep 2018 14:46:53 +0100 |
Chris Cannam |
Factor out paintChannelScaleGuides
zoom
|
| Fri, 21 Sep 2018 14:33:43 +0100 |
Chris Cannam |
Another tidy
zoom
|
| Fri, 21 Sep 2018 14:22:53 +0100 |
Chris Cannam |
A further refactor with range blocks
zoom
|
| Fri, 21 Sep 2018 14:01:09 +0100 |
Chris Cannam |
Refactor out paintChannel
zoom
|
| Fri, 21 Sep 2018 11:50:15 +0100 |
Chris Cannam |
Fix typo that created un-reloadable session file
zoom
|
| Fri, 21 Sep 2018 11:50:05 +0100 |
Chris Cannam |
Ensure getFrameForX returns value on zoom blocksize boundary; take advantage of that (this is essentially reverting to the same behaviour as in the default branch, which we should probably have done all along)
zoom
|
| Thu, 20 Sep 2018 15:42:12 +0100 |
Chris Cannam |
Responding to a hang due to mismatching zoom and block sizes
zoom
|
| Thu, 20 Sep 2018 13:14:15 +0100 |
Chris Cannam |
Avoid compiler warning
zoom
|
| Thu, 20 Sep 2018 11:45:26 +0100 |
Chris Cannam |
Further ZoomLevel fixes
zoom
|
| Thu, 20 Sep 2018 10:45:24 +0100 |
Chris Cannam |
More ZoomLevel updates
zoom
|
| Wed, 19 Sep 2018 15:42:22 +0100 |
Chris Cannam |
Gradual ZoomLevel updates
zoom
|
| Mon, 17 Sep 2018 13:51:31 +0100 |
Chris Cannam |
Merge from default branch
zoom
|
| Wed, 12 Sep 2018 15:58:11 +0100 |
Chris Cannam |
Merge from branch import-audio-data
|
| Wed, 12 Sep 2018 15:17:38 +0100 |
Chris Cannam |
Propose to take only value-like columns as audio samples, not all numeric ones - now that it's easy enough for the user to overrule
import-audio-data
|
| Fri, 07 Sep 2018 18:12:44 +0100 |
Chris Cannam |
Move out these bits which are now in CSVFormat
import-audio-data
|
| Thu, 06 Sep 2018 16:26:40 +0100 |
Chris Cannam |
Sample range
import-audio-data
|
| Thu, 06 Sep 2018 13:58:09 +0100 |
Chris Cannam |
Refactor; the two use-cases of CSVFormatDialog were turning out to be different enough to justify two separate classes
import-audio-data
|
| Thu, 06 Sep 2018 11:49:31 +0100 |
Chris Cannam |
Support audio-format CSV format selection in dialog
import-audio-data
|
| Tue, 04 Sep 2018 13:19:32 +0100 |
Chris Cannam |
Merge from default branch
import-audio-data
|
| Thu, 09 Aug 2018 16:09:52 +0100 |
Chris Cannam |
Tidy edges of scale area on Mac
|
| Wed, 04 Jul 2018 15:34:16 +0100 |
Chris Cannam |
Ensure scale appears for layer when drawn in AutoAlign mode without any other layer present to align to
|
| Wed, 04 Jul 2018 15:33:47 +0100 |
Chris Cannam |
Layers such as time-value layers with ColourDistinguishes property should use the dark background when a bright colour is selected. This is how it was always supposed to work, I think, but I broke it so long ago that this "fix" might itself come across as a surprising breaking change
|
| Thu, 28 Jun 2018 14:48:35 +0100 |
Chris Cannam |
Fix compiler warning
|
| Thu, 28 Jun 2018 14:49:00 +0100 |
Chris Cannam |
Handle additional case
import-audio-data
|
| Thu, 28 Jun 2018 14:48:48 +0100 |
Chris Cannam |
Rename guard
import-audio-data
|
| Thu, 28 Jun 2018 14:48:35 +0100 |
Chris Cannam |
Fix compiler warning
import-audio-data
|
| Tue, 26 Jun 2018 14:37:36 +0100 |
Chris Cannam |
Tool button on Mac (something has gone very wrong with the appearance of the push button in latest builds)
|
| Tue, 26 Jun 2018 14:36:56 +0100 |
Chris Cannam |
Never scale down
|
| Tue, 26 Jun 2018 08:35:49 +0100 |
Chris Cannam |
Improve level-pan rendering quality on non-retina OSX
|
| Mon, 25 Jun 2018 15:29:47 +0100 |
Chris Cannam |
Better rendering for widget cells
|
| Mon, 25 Jun 2018 14:16:16 +0100 |
Chris Cannam |
Slightly nicer pan handling, avoiding showing spurious >0dB peaks
|
| Fri, 22 Jun 2018 17:51:47 +0100 |
Chris Cannam |
Experiment with rounded rects
|
| Fri, 22 Jun 2018 17:19:48 +0100 |
Chris Cannam |
Collect the bits of bookkeeping for mouse wheel events, and use in all widgets
|
| Fri, 22 Jun 2018 13:41:54 +0100 |
Chris Cannam |
Proper handling for wheel rotation distance
|
| Thu, 21 Jun 2018 15:36:29 +0100 |
Chris Cannam |
Half-steps for level in level-pan widget
|
| Thu, 21 Jun 2018 10:43:14 +0100 |
Chris Cannam |
Ctrl-click on level-pan tool button now also resets to default
|
| Mon, 11 Jun 2018 14:40:36 +0100 |
Chris Cannam |
Merge from branch plugin-path-config
|
| Mon, 11 Jun 2018 11:38:09 +0100 |
Chris Cannam |
Fix compiler warning
plugin-path-config
|
| Fri, 08 Jun 2018 15:11:11 +0100 |
Chris Cannam |
Minor improvement to (still nasty) button layout on OSX
plugin-path-config
|
| Fri, 08 Jun 2018 14:31:47 +0100 |
Chris Cannam |
Use type keys as indices rather than labels
plugin-path-config
|
| Wed, 06 Jun 2018 15:55:49 +0100 |
Chris Cannam |
Fix erroneous tooltip
plugin-path-config
|
| Mon, 04 Jun 2018 15:44:57 +0100 |
Chris Cannam |
Show value of environment variable; populate for last plugin type by default (as that happens to be Vamp)
plugin-path-config
|
| Fri, 25 May 2018 16:05:51 +0100 |
Chris Cannam |
Various logic fixes, and use new setter-class structures
plugin-path-config
|
| Fri, 25 May 2018 13:39:08 +0100 |
Chris Cannam |
Plugin review dialog
plugin-path-config
|
| Wed, 23 May 2018 16:24:35 +0100 |
Chris Cannam |
Add "Add"
plugin-path-config
|
| Wed, 23 May 2018 11:52:19 +0100 |
Chris Cannam |
More work on plugin path configuration layout &c
plugin-path-config
|
| Mon, 21 May 2018 16:15:36 +0100 |
Chris Cannam |
Toward more than one plugin type in this widget
plugin-path-config
|
| Tue, 15 May 2018 15:25:04 +0100 |
Chris Cannam |
Grey-out meaningless buttons
plugin-path-config
|
| Tue, 15 May 2018 13:56:26 +0100 |
Chris Cannam |
Better editing mechanism
plugin-path-config
|
| Tue, 15 May 2018 11:18:07 +0100 |
Chris Cannam |
Up/down
plugin-path-config
|
| Fri, 11 May 2018 16:59:14 +0100 |
Chris Cannam |
Toward allowing the user to see (at least, and maybe change) the plugin path
plugin-path-config
|
| Tue, 08 May 2018 14:27:54 +0100 |
Chris Cannam |
Hack to ensure vertical scale lines are in the right place in pixel-doubling rendering
|
| Tue, 08 May 2018 14:07:22 +0100 |
Chris Cannam |
Tidy
|
| Thu, 03 May 2018 15:24:14 +0100 |
Chris Cannam |
Merge from branch horizontal-scale
|
| Thu, 03 May 2018 15:15:15 +0100 |
Chris Cannam |
Provide linear horizontal scale in spectrum as well as log; fix bin positioning and colour scale property box updating; ensure proper background colour and visibility of peak lines
horizontal-scale
|
| Wed, 02 May 2018 14:27:17 +0100 |
Chris Cannam |
Merge
horizontal-scale
|
| Wed, 02 May 2018 14:26:51 +0100 |
Chris Cannam |
Fix positioning of peak lines on spectrum layer (origin is already accounted for in the bin/frequency to x conversion functions)
|
| Wed, 02 May 2018 14:25:44 +0100 |
Chris Cannam |
Tweaks to horizontal scale
horizontal-scale
|
| Tue, 01 May 2018 16:32:35 +0100 |
Chris Cannam |
Draw some ticks
horizontal-scale
|
| Tue, 01 May 2018 16:14:22 +0100 |
Chris Cannam |
Branch toward adding horizontal numerical scales to things
horizontal-scale
|
| Thu, 26 Apr 2018 15:06:41 +0100 |
Chris Cannam |
Tidy
|
| Thu, 26 Apr 2018 09:27:01 +0100 |
Chris Cannam |
Scale scalable icon
|
| Tue, 24 Apr 2018 10:15:54 +0100 |
Chris Cannam |
Adjust y-coord of text labels to accommodate larger scaled fonts
|
| Mon, 23 Apr 2018 16:06:27 +0100 |
Chris Cannam |
Delete rows in reverse order for safety
|
| Mon, 23 Apr 2018 16:04:51 +0100 |
Chris Cannam |
Avoid crash when scrolling with an empty layer open
|
| Thu, 19 Apr 2018 14:36:16 +0100 |
Chris Cannam |
Make selection extents more visible on hi-dpi
|
| Thu, 19 Apr 2018 14:35:59 +0100 |
Chris Cannam |
Make the overlays at either end translucent, so they don't completely crop out any underlying text or necessary info (e.g. selection extents)
|
| Tue, 17 Apr 2018 10:47:38 +0100 |
Lucas Thompson |
Formatting changes to align more with SV style conventions
|
| Tue, 17 Apr 2018 10:47:14 +0100 |
Lucas Thompson |
Accept optional modality in constructor and fix subsequent possible side effect (re-opening dialog when just cancelled)
|
| Thu, 01 Mar 2018 18:02:22 +0000 |
Chris Cannam |
Untabify
|
