Chris@0: /* -*- c-basic-offset: 4 -*-  vi:set ts=8 sts=4 sw=4: */
Chris@0: 
Chris@0: /*
Chris@0:     A waveform viewer and audio annotation editor.
Chris@5:     Chris Cannam, Queen Mary University of London, 2005-2006
Chris@0:     
Chris@0:     This is experimental software.  Not for distribution.
Chris@0: */
Chris@0: 
Chris@0: #include "SpectrogramLayer.h"
Chris@0: 
Chris@0: #include "base/View.h"
Chris@0: #include "base/Profiler.h"
Chris@0: #include "base/AudioLevel.h"
Chris@0: #include "base/Window.h"
Chris@24: #include "base/Pitch.h"
Chris@0: 
Chris@35: #include "dsp/maths/MathUtilities.h"
Chris@35: 
Chris@0: #include <QPainter>
Chris@0: #include <QImage>
Chris@0: #include <QPixmap>
Chris@0: #include <QRect>
Chris@0: #include <QTimer>
Chris@0: 
Chris@0: #include <iostream>
Chris@0: 
Chris@0: #include <cassert>
Chris@0: #include <cmath>
Chris@0: 
Chris@0: //#define DEBUG_SPECTROGRAM_REPAINT 1
Chris@0: 
Chris@0: 
Chris@44: SpectrogramLayer::SpectrogramLayer(Configuration config) :
Chris@44:     Layer(),
Chris@0:     m_model(0),
Chris@0:     m_channel(0),
Chris@0:     m_windowSize(1024),
Chris@0:     m_windowType(HanningWindow),
Chris@0:     m_windowOverlap(50),
Chris@0:     m_gain(1.0),
Chris@37:     m_threshold(0.0),
Chris@9:     m_colourRotation(0),
Chris@37:     m_minFrequency(0),
Chris@0:     m_maxFrequency(8000),
Chris@0:     m_colourScale(dBColourScale),
Chris@0:     m_colourScheme(DefaultColours),
Chris@0:     m_frequencyScale(LinearFrequencyScale),
Chris@37:     m_binDisplay(AllBins),
Chris@36:     m_normalizeColumns(false),
Chris@0:     m_cache(0),
Chris@0:     m_cacheInvalid(true),
Chris@0:     m_pixmapCache(0),
Chris@0:     m_pixmapCacheInvalid(true),
Chris@0:     m_fillThread(0),
Chris@0:     m_updateTimer(0),
Chris@44:     m_candidateFillStartFrame(0),
Chris@0:     m_lastFillExtent(0),
Chris@0:     m_exiting(false)
Chris@0: {
Chris@0:     if (config == MelodicRange) {
Chris@0: 	setWindowSize(8192);
Chris@0: 	setWindowOverlap(90);
Chris@0: 	setWindowType(ParzenWindow);
Chris@0: 	setMaxFrequency(1000);
Chris@0: 	setColourScale(LinearColourScale);
Chris@37:     } else if (config == MelodicPeaks) {
Chris@37: 	setWindowSize(4096);
Chris@37: 	setWindowOverlap(90);
Chris@37: 	setWindowType(BlackmanWindow);
Chris@40: 	setMaxFrequency(2000);
Chris@37: 	setMinFrequency(40);
Chris@37: 	setFrequencyScale(LogFrequencyScale);
Chris@41: 	setColourScale(MeterColourScale);
Chris@37: 	setBinDisplay(PeakFrequencies);
Chris@37: 	setNormalizeColumns(true);
Chris@0:     }
Chris@0: }
Chris@0: 
Chris@0: SpectrogramLayer::~SpectrogramLayer()
Chris@0: {
Chris@0:     delete m_updateTimer;
Chris@0:     m_updateTimer = 0;
Chris@0: 
Chris@0:     m_exiting = true;
Chris@0:     m_condition.wakeAll();
Chris@0:     if (m_fillThread) m_fillThread->wait();
Chris@0:     delete m_fillThread;
Chris@0:     
Chris@0:     delete m_cache;
Chris@0: }
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::setModel(const DenseTimeValueModel *model)
Chris@0: {
Chris@34:     std::cerr << "SpectrogramLayer(" << this << "): setModel(" << model << ")" << std::endl;
Chris@34: 
Chris@0:     m_mutex.lock();
Chris@35:     m_cacheInvalid = true;
Chris@0:     m_model = model;
Chris@34:     delete m_cache; //!!! hang on, this isn't safe to do here is it? 
Chris@34: 		    // we need some sort of guard against the fill
Chris@34: 		    // thread trying to read the defunct model too.
Chris@34: 		    // should we use a scavenger?
Chris@31:     m_cache = 0;
Chris@0:     m_mutex.unlock();
Chris@0: 
Chris@0:     if (!m_model || !m_model->isOK()) return;
Chris@0: 
Chris@0:     connect(m_model, SIGNAL(modelChanged()), this, SIGNAL(modelChanged()));
Chris@0:     connect(m_model, SIGNAL(modelChanged(size_t, size_t)),
Chris@0: 	    this, SIGNAL(modelChanged(size_t, size_t)));
Chris@0: 
Chris@0:     connect(m_model, SIGNAL(completionChanged()),
Chris@0: 	    this, SIGNAL(modelCompletionChanged()));
Chris@0: 
Chris@0:     connect(m_model, SIGNAL(modelChanged()), this, SLOT(cacheInvalid()));
Chris@0:     connect(m_model, SIGNAL(modelChanged(size_t, size_t)),
Chris@0: 	    this, SLOT(cacheInvalid(size_t, size_t)));
Chris@0: 
Chris@0:     emit modelReplaced();
Chris@0:     fillCache();
Chris@0: }
Chris@0: 
Chris@0: Layer::PropertyList
Chris@0: SpectrogramLayer::getProperties() const
Chris@0: {
Chris@0:     PropertyList list;
Chris@0:     list.push_back(tr("Colour"));
Chris@0:     list.push_back(tr("Colour Scale"));
Chris@0:     list.push_back(tr("Window Type"));
Chris@0:     list.push_back(tr("Window Size"));
Chris@0:     list.push_back(tr("Window Overlap"));
Chris@36:     list.push_back(tr("Normalize"));
Chris@37:     list.push_back(tr("Bin Display"));
Chris@37:     list.push_back(tr("Threshold"));
Chris@0:     list.push_back(tr("Gain"));
Chris@9:     list.push_back(tr("Colour Rotation"));
Chris@37:     list.push_back(tr("Min Frequency"));
Chris@0:     list.push_back(tr("Max Frequency"));
Chris@0:     list.push_back(tr("Frequency Scale"));
Chris@0:     return list;
Chris@0: }
Chris@0: 
Chris@0: Layer::PropertyType
Chris@0: SpectrogramLayer::getPropertyType(const PropertyName &name) const
Chris@0: {
Chris@0:     if (name == tr("Gain")) return RangeProperty;
Chris@9:     if (name == tr("Colour Rotation")) return RangeProperty;
Chris@36:     if (name == tr("Normalize")) return ToggleProperty;
Chris@37:     if (name == tr("Threshold")) return RangeProperty;
Chris@0:     return ValueProperty;
Chris@0: }
Chris@0: 
Chris@0: QString
Chris@0: SpectrogramLayer::getPropertyGroupName(const PropertyName &name) const
Chris@0: {
Chris@0:     if (name == tr("Window Size") ||
Chris@35: 	name == tr("Window Type") ||
Chris@0: 	name == tr("Window Overlap")) return tr("Window");
Chris@35:     if (name == tr("Colour") ||
Chris@38: 	name == tr("Gain") ||
Chris@38: 	name == tr("Threshold") ||
Chris@35: 	name == tr("Colour Rotation")) return tr("Colour");
Chris@38:     if (name == tr("Normalize") ||
Chris@37: 	name == tr("Bin Display") ||
Chris@0: 	name == tr("Colour Scale")) return tr("Scale");
Chris@0:     if (name == tr("Max Frequency") ||
Chris@37: 	name == tr("Min Frequency") ||
Chris@35: 	name == tr("Frequency Scale") ||
Chris@37: 	name == tr("Frequency Adjustment")) return tr("Range");
Chris@0:     return QString();
Chris@0: }
Chris@0: 
Chris@0: int
Chris@0: SpectrogramLayer::getPropertyRangeAndValue(const PropertyName &name,
Chris@55: 					   int *min, int *max) const
Chris@0: {
Chris@0:     int deft = 0;
Chris@0: 
Chris@55:     int garbage0, garbage1;
Chris@55:     if (!min) min = &garbage0;
Chris@55:     if (!max) max = &garbage1;
Chris@10: 
Chris@0:     if (name == tr("Gain")) {
Chris@0: 
Chris@0: 	*min = -50;
Chris@0: 	*max = 50;
Chris@0: 
Chris@0: 	deft = lrint(log10(m_gain) * 20.0);
Chris@0: 	if (deft < *min) deft = *min;
Chris@0: 	if (deft > *max) deft = *max;
Chris@0: 
Chris@37:     } else if (name == tr("Threshold")) {
Chris@37: 
Chris@37: 	*min = -50;
Chris@37: 	*max = 0;
Chris@37: 
Chris@37: 	deft = lrintf(AudioLevel::multiplier_to_dB(m_threshold));
Chris@37: 	if (deft < *min) deft = *min;
Chris@37: 	if (deft > *max) deft = *max;
Chris@37: 
Chris@9:     } else if (name == tr("Colour Rotation")) {
Chris@9: 
Chris@9: 	*min = 0;
Chris@9: 	*max = 256;
Chris@9: 
Chris@9: 	deft = m_colourRotation;
Chris@9: 
Chris@0:     } else if (name == tr("Colour Scale")) {
Chris@0: 
Chris@0: 	*min = 0;
Chris@0: 	*max = 3;
Chris@0: 
Chris@0: 	deft = (int)m_colourScale;
Chris@0: 
Chris@0:     } else if (name == tr("Colour")) {
Chris@0: 
Chris@0: 	*min = 0;
Chris@0: 	*max = 5;
Chris@0: 
Chris@0: 	deft = (int)m_colourScheme;
Chris@0: 
Chris@0:     } else if (name == tr("Window Type")) {
Chris@0: 
Chris@0: 	*min = 0;
Chris@0: 	*max = 6;
Chris@0: 
Chris@0: 	deft = (int)m_windowType;
Chris@0: 
Chris@0:     } else if (name == tr("Window Size")) {
Chris@0: 
Chris@0: 	*min = 0;
Chris@0: 	*max = 10;
Chris@0: 	
Chris@0: 	deft = 0;
Chris@0: 	int ws = m_windowSize;
Chris@0: 	while (ws > 32) { ws >>= 1; deft ++; }
Chris@0: 
Chris@0:     } else if (name == tr("Window Overlap")) {
Chris@0: 	
Chris@0: 	*min = 0;
Chris@0: 	*max = 4;
Chris@0: 	
Chris@0: 	deft = m_windowOverlap / 25;
Chris@0: 	if (m_windowOverlap == 90) deft = 4;
Chris@0:     
Chris@37:     } else if (name == tr("Min Frequency")) {
Chris@37: 
Chris@37: 	*min = 0;
Chris@37: 	*max = 9;
Chris@37: 
Chris@37: 	switch (m_minFrequency) {
Chris@37: 	case 0: default: deft = 0; break;
Chris@37: 	case 10: deft = 1; break;
Chris@37: 	case 20: deft = 2; break;
Chris@37: 	case 40: deft = 3; break;
Chris@37: 	case 100: deft = 4; break;
Chris@37: 	case 250: deft = 5; break;
Chris@37: 	case 500: deft = 6; break;
Chris@37: 	case 1000: deft = 7; break;
Chris@37: 	case 4000: deft = 8; break;
Chris@37: 	case 10000: deft = 9; break;
Chris@37: 	}
Chris@37:     
Chris@0:     } else if (name == tr("Max Frequency")) {
Chris@0: 
Chris@0: 	*min = 0;
Chris@0: 	*max = 9;
Chris@0: 
Chris@0: 	switch (m_maxFrequency) {
Chris@0: 	case 500: deft = 0; break;
Chris@0: 	case 1000: deft = 1; break;
Chris@0: 	case 1500: deft = 2; break;
Chris@0: 	case 2000: deft = 3; break;
Chris@0: 	case 4000: deft = 4; break;
Chris@0: 	case 6000: deft = 5; break;
Chris@0: 	case 8000: deft = 6; break;
Chris@0: 	case 12000: deft = 7; break;
Chris@0: 	case 16000: deft = 8; break;
Chris@0: 	default: deft = 9; break;
Chris@0: 	}
Chris@0: 
Chris@0:     } else if (name == tr("Frequency Scale")) {
Chris@0: 
Chris@0: 	*min = 0;
Chris@0: 	*max = 1;
Chris@0: 	deft = (int)m_frequencyScale;
Chris@0: 
Chris@37:     } else if (name == tr("Bin Display")) {
Chris@35: 
Chris@35: 	*min = 0;
Chris@35: 	*max = 2;
Chris@37: 	deft = (int)m_binDisplay;
Chris@35: 
Chris@36:     } else if (name == tr("Normalize")) {
Chris@36: 	
Chris@36: 	deft = (m_normalizeColumns ? 1 : 0);
Chris@36: 
Chris@0:     } else {
Chris@0: 	deft = Layer::getPropertyRangeAndValue(name, min, max);
Chris@0:     }
Chris@0: 
Chris@0:     return deft;
Chris@0: }
Chris@0: 
Chris@0: QString
Chris@0: SpectrogramLayer::getPropertyValueLabel(const PropertyName &name,
Chris@9: 					int value) const
Chris@0: {
Chris@0:     if (name == tr("Colour")) {
Chris@0: 	switch (value) {
Chris@0: 	default:
Chris@0: 	case 0: return tr("Default");
Chris@0: 	case 1: return tr("White on Black");
Chris@0: 	case 2: return tr("Black on White");
Chris@0: 	case 3: return tr("Red on Blue");
Chris@0: 	case 4: return tr("Yellow on Black");
Chris@40: 	case 5: return tr("Fruit Salad");
Chris@0: 	}
Chris@0:     }
Chris@0:     if (name == tr("Colour Scale")) {
Chris@0: 	switch (value) {
Chris@0: 	default:
Chris@37: 	case 0: return tr("Linear");
Chris@37: 	case 1: return tr("Meter");
Chris@37: 	case 2: return tr("dB");
Chris@0: 	case 3: return tr("Phase");
Chris@0: 	}
Chris@0:     }
Chris@0:     if (name == tr("Window Type")) {
Chris@0: 	switch ((WindowType)value) {
Chris@0: 	default:
Chris@35: 	case RectangularWindow: return tr("Rectangle");
Chris@0: 	case BartlettWindow: return tr("Bartlett");
Chris@0: 	case HammingWindow: return tr("Hamming");
Chris@0: 	case HanningWindow: return tr("Hanning");
Chris@0: 	case BlackmanWindow: return tr("Blackman");
Chris@0: 	case GaussianWindow: return tr("Gaussian");
Chris@0: 	case ParzenWindow: return tr("Parzen");
Chris@0: 	}
Chris@0:     }
Chris@0:     if (name == tr("Window Size")) {
Chris@0: 	return QString("%1").arg(32 << value);
Chris@0:     }
Chris@0:     if (name == tr("Window Overlap")) {
Chris@0: 	switch (value) {
Chris@0: 	default:
Chris@35: 	case 0: return tr("0%");
Chris@35: 	case 1: return tr("25%");
Chris@35: 	case 2: return tr("50%");
Chris@35: 	case 3: return tr("75%");
Chris@35: 	case 4: return tr("90%");
Chris@0: 	}
Chris@0:     }
Chris@37:     if (name == tr("Min Frequency")) {
Chris@37: 	switch (value) {
Chris@37: 	default:
Chris@38: 	case 0: return tr("No min");
Chris@37: 	case 1: return tr("10 Hz");
Chris@37: 	case 2: return tr("20 Hz");
Chris@37: 	case 3: return tr("40 Hz");
Chris@37: 	case 4: return tr("100 Hz");
Chris@37: 	case 5: return tr("250 Hz");
Chris@37: 	case 6: return tr("500 Hz");
Chris@37: 	case 7: return tr("1 KHz");
Chris@37: 	case 8: return tr("4 KHz");
Chris@37: 	case 9: return tr("10 KHz");
Chris@37: 	}
Chris@37:     }
Chris@0:     if (name == tr("Max Frequency")) {
Chris@0: 	switch (value) {
Chris@0: 	default:
Chris@0: 	case 0: return tr("500 Hz");
Chris@0: 	case 1: return tr("1 KHz");
Chris@0: 	case 2: return tr("1.5 KHz");
Chris@0: 	case 3: return tr("2 KHz");
Chris@0: 	case 4: return tr("4 KHz");
Chris@0: 	case 5: return tr("6 KHz");
Chris@0: 	case 6: return tr("8 KHz");
Chris@0: 	case 7: return tr("12 KHz");
Chris@0: 	case 8: return tr("16 KHz");
Chris@38: 	case 9: return tr("No max");
Chris@0: 	}
Chris@0:     }
Chris@0:     if (name == tr("Frequency Scale")) {
Chris@0: 	switch (value) {
Chris@0: 	default:
Chris@0: 	case 0: return tr("Linear");
Chris@0: 	case 1: return tr("Log");
Chris@0: 	}
Chris@0:     }
Chris@37:     if (name == tr("Bin Display")) {
Chris@35: 	switch (value) {
Chris@35: 	default:
Chris@37: 	case 0: return tr("All Bins");
Chris@37: 	case 1: return tr("Peak Bins");
Chris@37: 	case 2: return tr("Frequencies");
Chris@35: 	}
Chris@35:     }
Chris@0:     return tr("<unknown>");
Chris@0: }
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::setProperty(const PropertyName &name, int value)
Chris@0: {
Chris@0:     if (name == tr("Gain")) {
Chris@0: 	setGain(pow(10, float(value)/20.0));
Chris@37:     } else if (name == tr("Threshold")) {
Chris@37: 	if (value == -50) setThreshold(0.0);
Chris@37: 	else setThreshold(AudioLevel::dB_to_multiplier(value));
Chris@9:     } else if (name == tr("Colour Rotation")) {
Chris@9: 	setColourRotation(value);
Chris@0:     } else if (name == tr("Colour")) {
Chris@0: 	switch (value) {
Chris@0: 	default:
Chris@0: 	case 0:	setColourScheme(DefaultColours); break;
Chris@0: 	case 1: setColourScheme(WhiteOnBlack); break;
Chris@0: 	case 2: setColourScheme(BlackOnWhite); break;
Chris@0: 	case 3: setColourScheme(RedOnBlue); break;
Chris@0: 	case 4: setColourScheme(YellowOnBlack); break;
Chris@40: 	case 5: setColourScheme(Rainbow); break;
Chris@0: 	}
Chris@0:     } else if (name == tr("Window Type")) {
Chris@0: 	setWindowType(WindowType(value));
Chris@0:     } else if (name == tr("Window Size")) {
Chris@0: 	setWindowSize(32 << value);
Chris@0:     } else if (name == tr("Window Overlap")) {
Chris@0: 	if (value == 4) setWindowOverlap(90);
Chris@0: 	else setWindowOverlap(25 * value);
Chris@37:     } else if (name == tr("Min Frequency")) {
Chris@37: 	switch (value) {
Chris@37: 	default:
Chris@37: 	case 0: setMinFrequency(0); break;
Chris@37: 	case 1: setMinFrequency(10); break;
Chris@37: 	case 2: setMinFrequency(20); break;
Chris@37: 	case 3: setMinFrequency(40); break;
Chris@37: 	case 4: setMinFrequency(100); break;
Chris@37: 	case 5: setMinFrequency(250); break;
Chris@37: 	case 6: setMinFrequency(500); break;
Chris@37: 	case 7: setMinFrequency(1000); break;
Chris@37: 	case 8: setMinFrequency(4000); break;
Chris@37: 	case 9: setMinFrequency(10000); break;
Chris@37: 	}
Chris@0:     } else if (name == tr("Max Frequency")) {
Chris@0: 	switch (value) {
Chris@0: 	case 0: setMaxFrequency(500); break;
Chris@0: 	case 1: setMaxFrequency(1000); break;
Chris@0: 	case 2: setMaxFrequency(1500); break;
Chris@0: 	case 3: setMaxFrequency(2000); break;
Chris@0: 	case 4: setMaxFrequency(4000); break;
Chris@0: 	case 5: setMaxFrequency(6000); break;
Chris@0: 	case 6: setMaxFrequency(8000); break;
Chris@0: 	case 7: setMaxFrequency(12000); break;
Chris@0: 	case 8: setMaxFrequency(16000); break;
Chris@0: 	default:
Chris@0: 	case 9: setMaxFrequency(0); break;
Chris@0: 	}
Chris@0:     } else if (name == tr("Colour Scale")) {
Chris@0: 	switch (value) {
Chris@0: 	default:
Chris@0: 	case 0: setColourScale(LinearColourScale); break;
Chris@0: 	case 1: setColourScale(MeterColourScale); break;
Chris@0: 	case 2: setColourScale(dBColourScale); break;
Chris@0: 	case 3: setColourScale(PhaseColourScale); break;
Chris@0: 	}
Chris@0:     } else if (name == tr("Frequency Scale")) {
Chris@0: 	switch (value) {
Chris@0: 	default:
Chris@0: 	case 0: setFrequencyScale(LinearFrequencyScale); break;
Chris@0: 	case 1: setFrequencyScale(LogFrequencyScale); break;
Chris@0: 	}
Chris@37:     } else if (name == tr("Bin Display")) {
Chris@35: 	switch (value) {
Chris@35: 	default:
Chris@37: 	case 0: setBinDisplay(AllBins); break;
Chris@37: 	case 1: setBinDisplay(PeakBins); break;
Chris@37: 	case 2: setBinDisplay(PeakFrequencies); break;
Chris@35: 	}
Chris@36:     } else if (name == "Normalize") {
Chris@36: 	setNormalizeColumns(value ? true : false);
Chris@0:     }
Chris@0: }
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::setChannel(int ch)
Chris@0: {
Chris@0:     if (m_channel == ch) return;
Chris@0: 
Chris@0:     m_mutex.lock();
Chris@0:     m_cacheInvalid = true;
Chris@0:     m_pixmapCacheInvalid = true;
Chris@0:     
Chris@0:     m_channel = ch;
Chris@9: 
Chris@9:     m_mutex.unlock();
Chris@9: 
Chris@0:     emit layerParametersChanged();
Chris@9: 
Chris@0:     fillCache();
Chris@0: }
Chris@0: 
Chris@0: int
Chris@0: SpectrogramLayer::getChannel() const
Chris@0: {
Chris@0:     return m_channel;
Chris@0: }
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::setWindowSize(size_t ws)
Chris@0: {
Chris@0:     if (m_windowSize == ws) return;
Chris@0: 
Chris@0:     m_mutex.lock();
Chris@0:     m_cacheInvalid = true;
Chris@0:     m_pixmapCacheInvalid = true;
Chris@0:     
Chris@0:     m_windowSize = ws;
Chris@0:     
Chris@0:     m_mutex.unlock();
Chris@9: 
Chris@9:     emit layerParametersChanged();
Chris@9: 
Chris@0:     fillCache();
Chris@0: }
Chris@0: 
Chris@0: size_t
Chris@0: SpectrogramLayer::getWindowSize() const
Chris@0: {
Chris@0:     return m_windowSize;
Chris@0: }
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::setWindowOverlap(size_t wi)
Chris@0: {
Chris@0:     if (m_windowOverlap == wi) return;
Chris@0: 
Chris@0:     m_mutex.lock();
Chris@0:     m_cacheInvalid = true;
Chris@0:     m_pixmapCacheInvalid = true;
Chris@0:     
Chris@0:     m_windowOverlap = wi;
Chris@0:     
Chris@0:     m_mutex.unlock();
Chris@9: 
Chris@9:     emit layerParametersChanged();
Chris@9: 
Chris@0:     fillCache();
Chris@0: }
Chris@0: 
Chris@0: size_t
Chris@0: SpectrogramLayer::getWindowOverlap() const
Chris@0: {
Chris@0:     return m_windowOverlap;
Chris@0: }
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::setWindowType(WindowType w)
Chris@0: {
Chris@0:     if (m_windowType == w) return;
Chris@0: 
Chris@0:     m_mutex.lock();
Chris@0:     m_cacheInvalid = true;
Chris@0:     m_pixmapCacheInvalid = true;
Chris@0:     
Chris@0:     m_windowType = w;
Chris@0:     
Chris@0:     m_mutex.unlock();
Chris@9: 
Chris@9:     emit layerParametersChanged();
Chris@9: 
Chris@0:     fillCache();
Chris@0: }
Chris@0: 
Chris@0: WindowType
Chris@0: SpectrogramLayer::getWindowType() const
Chris@0: {
Chris@0:     return m_windowType;
Chris@0: }
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::setGain(float gain)
Chris@0: {
Chris@55:     std::cerr << "SpectrogramLayer::setGain(" << gain << ") (my gain is now "
Chris@55: 	      << m_gain << ")" << std::endl;
Chris@55: 
Chris@40:     if (m_gain == gain) return;
Chris@0: 
Chris@0:     m_mutex.lock();
Chris@0:     m_pixmapCacheInvalid = true;
Chris@0:     
Chris@0:     m_gain = gain;
Chris@0:     
Chris@0:     m_mutex.unlock();
Chris@9: 
Chris@9:     emit layerParametersChanged();
Chris@9: 
Chris@0:     fillCache();
Chris@0: }
Chris@0: 
Chris@0: float
Chris@0: SpectrogramLayer::getGain() const
Chris@0: {
Chris@0:     return m_gain;
Chris@0: }
Chris@0: 
Chris@0: void
Chris@37: SpectrogramLayer::setThreshold(float threshold)
Chris@37: {
Chris@40:     if (m_threshold == threshold) return;
Chris@37: 
Chris@37:     m_mutex.lock();
Chris@37:     m_pixmapCacheInvalid = true;
Chris@37:     
Chris@37:     m_threshold = threshold;
Chris@37:     
Chris@37:     m_mutex.unlock();
Chris@37: 
Chris@37:     emit layerParametersChanged();
Chris@37: 
Chris@37:     fillCache();
Chris@37: }
Chris@37: 
Chris@37: float
Chris@37: SpectrogramLayer::getThreshold() const
Chris@37: {
Chris@37:     return m_threshold;
Chris@37: }
Chris@37: 
Chris@37: void
Chris@37: SpectrogramLayer::setMinFrequency(size_t mf)
Chris@37: {
Chris@37:     if (m_minFrequency == mf) return;
Chris@37: 
Chris@37:     m_mutex.lock();
Chris@37:     m_pixmapCacheInvalid = true;
Chris@37:     
Chris@37:     m_minFrequency = mf;
Chris@37:     
Chris@37:     m_mutex.unlock();
Chris@37: 
Chris@37:     emit layerParametersChanged();
Chris@37: }
Chris@37: 
Chris@37: size_t
Chris@37: SpectrogramLayer::getMinFrequency() const
Chris@37: {
Chris@37:     return m_minFrequency;
Chris@37: }
Chris@37: 
Chris@37: void
Chris@0: SpectrogramLayer::setMaxFrequency(size_t mf)
Chris@0: {
Chris@0:     if (m_maxFrequency == mf) return;
Chris@0: 
Chris@0:     m_mutex.lock();
Chris@0:     m_pixmapCacheInvalid = true;
Chris@0:     
Chris@0:     m_maxFrequency = mf;
Chris@0:     
Chris@0:     m_mutex.unlock();
Chris@9: 
Chris@9:     emit layerParametersChanged();
Chris@0: }
Chris@0: 
Chris@0: size_t
Chris@0: SpectrogramLayer::getMaxFrequency() const
Chris@0: {
Chris@0:     return m_maxFrequency;
Chris@0: }
Chris@0: 
Chris@0: void
Chris@9: SpectrogramLayer::setColourRotation(int r)
Chris@9: {
Chris@9:     m_mutex.lock();
Chris@9:     m_pixmapCacheInvalid = true;
Chris@9: 
Chris@9:     if (r < 0) r = 0;
Chris@9:     if (r > 256) r = 256;
Chris@9:     int distance = r - m_colourRotation;
Chris@9: 
Chris@9:     if (distance != 0) {
Chris@9: 	rotateCacheColourmap(-distance);
Chris@9: 	m_colourRotation = r;
Chris@9:     }
Chris@9:     
Chris@9:     m_mutex.unlock();
Chris@9: 
Chris@9:     emit layerParametersChanged();
Chris@9: }
Chris@9: 
Chris@9: void
Chris@0: SpectrogramLayer::setColourScale(ColourScale colourScale)
Chris@0: {
Chris@0:     if (m_colourScale == colourScale) return;
Chris@0: 
Chris@0:     m_mutex.lock();
Chris@0:     m_pixmapCacheInvalid = true;
Chris@0:     
Chris@0:     m_colourScale = colourScale;
Chris@0:     
Chris@0:     m_mutex.unlock();
Chris@0:     fillCache();
Chris@9: 
Chris@9:     emit layerParametersChanged();
Chris@0: }
Chris@0: 
Chris@0: SpectrogramLayer::ColourScale
Chris@0: SpectrogramLayer::getColourScale() const
Chris@0: {
Chris@0:     return m_colourScale;
Chris@0: }
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::setColourScheme(ColourScheme scheme)
Chris@0: {
Chris@0:     if (m_colourScheme == scheme) return;
Chris@0: 
Chris@0:     m_mutex.lock();
Chris@0:     m_pixmapCacheInvalid = true;
Chris@0:     
Chris@0:     m_colourScheme = scheme;
Chris@0:     setCacheColourmap();
Chris@9: 
Chris@9:     m_mutex.unlock();
Chris@9: 
Chris@0:     emit layerParametersChanged();
Chris@0: }
Chris@0: 
Chris@0: SpectrogramLayer::ColourScheme
Chris@0: SpectrogramLayer::getColourScheme() const
Chris@0: {
Chris@0:     return m_colourScheme;
Chris@0: }
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::setFrequencyScale(FrequencyScale frequencyScale)
Chris@0: {
Chris@0:     if (m_frequencyScale == frequencyScale) return;
Chris@0: 
Chris@0:     m_mutex.lock();
Chris@35: 
Chris@0:     m_pixmapCacheInvalid = true;
Chris@0:     
Chris@0:     m_frequencyScale = frequencyScale;
Chris@0:     
Chris@0:     m_mutex.unlock();
Chris@9: 
Chris@9:     emit layerParametersChanged();
Chris@0: }
Chris@0: 
Chris@0: SpectrogramLayer::FrequencyScale
Chris@0: SpectrogramLayer::getFrequencyScale() const
Chris@0: {
Chris@0:     return m_frequencyScale;
Chris@0: }
Chris@0: 
Chris@0: void
Chris@37: SpectrogramLayer::setBinDisplay(BinDisplay binDisplay)
Chris@35: {
Chris@37:     if (m_binDisplay == binDisplay) return;
Chris@35: 
Chris@35:     m_mutex.lock();
Chris@35: 
Chris@35:     m_pixmapCacheInvalid = true;
Chris@35:     
Chris@37:     m_binDisplay = binDisplay;
Chris@35:     
Chris@35:     m_mutex.unlock();
Chris@35: 
Chris@35:     fillCache();
Chris@35: 
Chris@35:     emit layerParametersChanged();
Chris@35: }
Chris@35: 
Chris@37: SpectrogramLayer::BinDisplay
Chris@37: SpectrogramLayer::getBinDisplay() const
Chris@35: {
Chris@37:     return m_binDisplay;
Chris@35: }
Chris@35: 
Chris@35: void
Chris@36: SpectrogramLayer::setNormalizeColumns(bool n)
Chris@36: {
Chris@36:     if (m_normalizeColumns == n) return;
Chris@36:     m_mutex.lock();
Chris@36: 
Chris@36:     m_pixmapCacheInvalid = true;
Chris@36:     m_normalizeColumns = n;
Chris@36:     m_mutex.unlock();
Chris@36: 
Chris@36:     fillCache();
Chris@36:     emit layerParametersChanged();
Chris@36: }
Chris@36: 
Chris@36: bool
Chris@36: SpectrogramLayer::getNormalizeColumns() const
Chris@36: {
Chris@36:     return m_normalizeColumns;
Chris@36: }
Chris@36: 
Chris@36: void
Chris@47: SpectrogramLayer::setLayerDormant(const View *v, bool dormant)
Chris@29: {
Chris@47:     QMutexLocker locker(&m_mutex);
Chris@47: 
Chris@47:     if (dormant == m_dormancy[v]) return;
Chris@33: 
Chris@33:     if (dormant) {
Chris@33: 
Chris@47: 	m_dormancy[v] = true;
Chris@33: 
Chris@34: //	delete m_cache;
Chris@34: //	m_cache = 0;
Chris@33: 	
Chris@34: 	m_cacheInvalid = true;
Chris@33: 	m_pixmapCacheInvalid = true;
Chris@33: 	delete m_pixmapCache;
Chris@33: 	m_pixmapCache = 0;
Chris@33: 	
Chris@33:     } else {
Chris@33: 
Chris@47: 	m_dormancy[v] = false;
Chris@33:     }
Chris@29: }
Chris@29: 
Chris@29: void
Chris@0: SpectrogramLayer::cacheInvalid()
Chris@0: {
Chris@0:     m_cacheInvalid = true;
Chris@0:     m_pixmapCacheInvalid = true;
Chris@0:     fillCache();
Chris@0: }
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::cacheInvalid(size_t, size_t)
Chris@0: {
Chris@0:     // for now (or forever?)
Chris@0:     cacheInvalid();
Chris@0: }
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::fillCache()
Chris@0: {
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0:     std::cerr << "SpectrogramLayer::fillCache" << std::endl;
Chris@0: #endif
Chris@0:     QMutexLocker locker(&m_mutex);
Chris@0: 
Chris@0:     m_lastFillExtent = 0;
Chris@0: 
Chris@0:     delete m_updateTimer;
Chris@0:     m_updateTimer = new QTimer(this);
Chris@0:     connect(m_updateTimer, SIGNAL(timeout()), this, SLOT(fillTimerTimedOut()));
Chris@0:     m_updateTimer->start(200);
Chris@0: 
Chris@0:     if (!m_fillThread) {
Chris@0: 	std::cerr << "SpectrogramLayer::fillCache creating thread" << std::endl;
Chris@0: 	m_fillThread = new CacheFillThread(*this);
Chris@0: 	m_fillThread->start();
Chris@0:     }
Chris@0: 
Chris@0:     m_condition.wakeAll();
Chris@0: }   
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::fillTimerTimedOut()
Chris@0: {
Chris@0:     if (m_fillThread && m_model) {
Chris@0: 	size_t fillExtent = m_fillThread->getFillExtent();
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0: 	std::cerr << "SpectrogramLayer::fillTimerTimedOut: extent " << fillExtent << ", last " << m_lastFillExtent << ", total " << m_model->getEndFrame() << std::endl;
Chris@0: #endif
Chris@0: 	if (fillExtent >= m_lastFillExtent) {
Chris@0: 	    if (fillExtent >= m_model->getEndFrame() && m_lastFillExtent > 0) {
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0: 		std::cerr << "complete!" << std::endl;
Chris@0: #endif
Chris@55: 		m_pixmapCacheInvalid = true;
Chris@0: 		emit modelChanged();
Chris@0: 		delete m_updateTimer;
Chris@0: 		m_updateTimer = 0;
Chris@0: 		m_lastFillExtent = 0;
Chris@0: 	    } else if (fillExtent > m_lastFillExtent) {
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0: 		std::cerr << "SpectrogramLayer: emitting modelChanged("
Chris@0: 			  << m_lastFillExtent << "," << fillExtent << ")" << std::endl;
Chris@0: #endif
Chris@55: 		m_pixmapCacheInvalid = true;
Chris@0: 		emit modelChanged(m_lastFillExtent, fillExtent);
Chris@0: 		m_lastFillExtent = fillExtent;
Chris@0: 	    }
Chris@0: 	} else {
Chris@44: //	    if (v) {
Chris@0: 		size_t sf = 0;
Chris@44: //!!!		if (v->getStartFrame() > 0) sf = v->getStartFrame();
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0: 		std::cerr << "SpectrogramLayer: going backwards, emitting modelChanged("
Chris@44: 			  << sf << "," << m_model->getEndFrame() << ")" << std::endl;
Chris@0: #endif
Chris@55: 		m_pixmapCacheInvalid = true;
Chris@44: 		emit modelChanged(sf, m_model->getEndFrame());
Chris@44: //	    }
Chris@0: 	    m_lastFillExtent = fillExtent;
Chris@0: 	}
Chris@0:     }
Chris@0: }
Chris@0: 
Chris@0: void
Chris@0: SpectrogramLayer::setCacheColourmap()
Chris@0: {
Chris@0:     if (m_cacheInvalid || !m_cache) return;
Chris@0: 
Chris@10:     int formerRotation = m_colourRotation;
Chris@10: 
Chris@38:     if (m_colourScheme == BlackOnWhite) {
Chris@38: 	m_cache->setColour(NO_VALUE, Qt::white);
Chris@38:     } else {
Chris@38: 	m_cache->setColour(NO_VALUE, Qt::black);
Chris@38:     }
Chris@0: 
Chris@0:     for (int pixel = 1; pixel < 256; ++pixel) {
Chris@0: 
Chris@0: 	QColor colour;
Chris@0: 	int hue, px;
Chris@0: 
Chris@0: 	switch (m_colourScheme) {
Chris@0: 
Chris@0: 	default:
Chris@0: 	case DefaultColours:
Chris@0: 	    hue = 256 - pixel;
Chris@0: 	    colour = QColor::fromHsv(hue, pixel/2 + 128, pixel);
Chris@0: 	    break;
Chris@0: 
Chris@0: 	case WhiteOnBlack:
Chris@0: 	    colour = QColor(pixel, pixel, pixel);
Chris@0: 	    break;
Chris@0: 
Chris@0: 	case BlackOnWhite:
Chris@0: 	    colour = QColor(256-pixel, 256-pixel, 256-pixel);
Chris@0: 	    break;
Chris@0: 
Chris@0: 	case RedOnBlue:
Chris@0: 	    colour = QColor(pixel > 128 ? (pixel - 128) * 2 : 0, 0,
Chris@0: 			    pixel < 128 ? pixel : (256 - pixel));
Chris@0: 	    break;
Chris@0: 
Chris@0: 	case YellowOnBlack:
Chris@0: 	    px = 256 - pixel;
Chris@0: 	    colour = QColor(px < 64 ? 255 - px/2 :
Chris@0: 			    px < 128 ? 224 - (px - 64) :
Chris@0: 			    px < 192 ? 160 - (px - 128) * 3 / 2 :
Chris@0: 			    256 - px,
Chris@0: 			    pixel,
Chris@0: 			    pixel / 4);
Chris@0: 	    break;
Chris@0: 
Chris@40: 	case Rainbow:
Chris@40: 	    hue = 250 - pixel;
Chris@40: 	    if (hue < 0) hue += 256;
Chris@40: 	    colour = QColor::fromHsv(pixel, 255, 255);
Chris@0: 	    break;
Chris@0: 	}
Chris@0: 
Chris@31: 	m_cache->setColour(pixel, colour);
Chris@0:     }
Chris@9: 
Chris@9:     m_colourRotation = 0;
Chris@10:     rotateCacheColourmap(m_colourRotation - formerRotation);
Chris@10:     m_colourRotation = formerRotation;
Chris@9: }
Chris@9: 
Chris@9: void
Chris@9: SpectrogramLayer::rotateCacheColourmap(int distance)
Chris@9: {
Chris@10:     if (!m_cache) return;
Chris@10: 
Chris@31:     QColor newPixels[256];
Chris@9: 
Chris@37:     newPixels[NO_VALUE] = m_cache->getColour(NO_VALUE);
Chris@9: 
Chris@9:     for (int pixel = 1; pixel < 256; ++pixel) {
Chris@9: 	int target = pixel + distance;
Chris@9: 	while (target < 1) target += 255;
Chris@9: 	while (target > 255) target -= 255;
Chris@31: 	newPixels[target] = m_cache->getColour(pixel);
Chris@9:     }
Chris@9: 
Chris@9:     for (int pixel = 0; pixel < 256; ++pixel) {
Chris@31: 	m_cache->setColour(pixel, newPixels[pixel]);
Chris@9:     }
Chris@0: }
Chris@0: 
Chris@38: float
Chris@38: SpectrogramLayer::calculateFrequency(size_t bin,
Chris@38: 				     size_t windowSize,
Chris@38: 				     size_t windowIncrement,
Chris@38: 				     size_t sampleRate,
Chris@38: 				     float oldPhase,
Chris@38: 				     float newPhase,
Chris@38: 				     bool &steadyState)
Chris@38: {
Chris@38:     // At frequency f, phase shift of 2pi (one cycle) happens in 1/f sec.
Chris@38:     // At hopsize h and sample rate sr, one hop happens in h/sr sec.
Chris@38:     // At window size w, for bin b, f is b*sr/w.
Chris@38:     // thus 2pi phase shift happens in w/(b*sr) sec.
Chris@38:     // We need to know what phase shift we expect from h/sr sec.
Chris@38:     // -> 2pi * ((h/sr) / (w/(b*sr)))
Chris@38:     //  = 2pi * ((h * b * sr) / (w * sr))
Chris@38:     //  = 2pi * (h * b) / w.
Chris@38: 
Chris@38:     float frequency = (float(bin) * sampleRate) / windowSize;
Chris@38: 
Chris@38:     float expectedPhase =
Chris@38: 	oldPhase + (2.0 * M_PI * bin * windowIncrement) / windowSize;
Chris@38: 
Chris@38:     float phaseError = MathUtilities::princarg(newPhase - expectedPhase);
Chris@38: 	    
Chris@38:     if (fabs(phaseError) < (1.1 * (windowIncrement * M_PI) / windowSize)) {
Chris@38: 
Chris@38: 	// The new frequency estimate based on the phase error
Chris@38: 	// resulting from assuming the "native" frequency of this bin
Chris@38: 
Chris@38: 	float newFrequency =
Chris@38: 	    (sampleRate * (expectedPhase + phaseError - oldPhase)) /
Chris@38: 	    (2 * M_PI * windowIncrement);
Chris@38: 
Chris@38: 	steadyState = true;
Chris@38: 	return newFrequency;
Chris@38:     }
Chris@38: 
Chris@38:     steadyState = false;
Chris@38:     return frequency;
Chris@38: }
Chris@38: 
Chris@38: void
Chris@0: SpectrogramLayer::fillCacheColumn(int column, double *input,
Chris@0: 				  fftw_complex *output,
Chris@0: 				  fftw_plan plan, 
Chris@9: 				  size_t windowSize,
Chris@9: 				  size_t increment,
Chris@38: 				  const Window<double> &windower) const
Chris@0: {
Chris@38:     //!!! we _do_ need a lock for these references to the model
Chris@38:     // though, don't we?
Chris@35: 
Chris@0:     int startFrame = increment * column;
Chris@9:     int endFrame = startFrame + windowSize;
Chris@0: 
Chris@9:     startFrame -= int(windowSize - increment) / 2;
Chris@9:     endFrame   -= int(windowSize - increment) / 2;
Chris@0:     size_t pfx = 0;
Chris@0: 
Chris@0:     if (startFrame < 0) {
Chris@0: 	pfx = size_t(-startFrame);
Chris@0: 	for (size_t i = 0; i < pfx; ++i) {
Chris@0: 	    input[i] = 0.0;
Chris@0: 	}
Chris@0:     }
Chris@0: 
Chris@0:     size_t got = m_model->getValues(m_channel, startFrame + pfx,
Chris@0: 				    endFrame, input + pfx);
Chris@9:     while (got + pfx < windowSize) {
Chris@0: 	input[got + pfx] = 0.0;
Chris@0: 	++got;
Chris@0:     }
Chris@0: 
Chris@37:     if (m_channel == -1) {
Chris@37: 	int channels = m_model->getChannelCount();
Chris@37: 	if (channels > 1) {
Chris@37: 	    for (size_t i = 0; i < windowSize; ++i) {
Chris@37: 		input[i] /= channels;
Chris@37: 	    }
Chris@37: 	}
Chris@37:     }
Chris@37: 
Chris@0:     windower.cut(input);
Chris@0: 
Chris@35:     for (size_t i = 0; i < windowSize/2; ++i) {
Chris@35: 	double temp = input[i];
Chris@35: 	input[i] = input[i + windowSize/2];
Chris@35: 	input[i + windowSize/2] = temp;
Chris@35:     }
Chris@35:     
Chris@0:     fftw_execute(plan);
Chris@0: 
Chris@38:     double factor = 0.0;
Chris@0: 
Chris@38:     // Calculate magnitude and phase from real and imaginary in
Chris@38:     // output[i][0] and output[i][1] respectively, and store the phase
Chris@38:     // straight into cache and the magnitude back into output[i][0]
Chris@38:     // (because we'll need to know the normalization factor,
Chris@38:     // i.e. maximum magnitude in this column, before we can store it)
Chris@37: 
Chris@38:     for (size_t i = 0; i < windowSize/2; ++i) {
Chris@35: 
Chris@36: 	double mag = sqrt(output[i][0] * output[i][0] +
Chris@36: 			  output[i][1] * output[i][1]);
Chris@38: 	mag /= windowSize / 2;
Chris@37: 
Chris@38: 	if (mag > factor) factor = mag;
Chris@37: 
Chris@38: 	double phase = atan2(output[i][1], output[i][0]);
Chris@38: 	phase = MathUtilities::princarg(phase);
Chris@37: 
Chris@38: 	output[i][0] = mag;
Chris@38: 	m_cache->setPhaseAt(column, i, phase);
Chris@38:     }
Chris@35: 
Chris@38:     m_cache->setNormalizationFactor(column, factor);
Chris@37: 
Chris@38:     for (size_t i = 0; i < windowSize/2; ++i) {
Chris@38: 	m_cache->setMagnitudeAt(column, i, output[i][0]);
Chris@38:     }
Chris@38: }
Chris@35: 
Chris@38: unsigned char
Chris@38: SpectrogramLayer::getDisplayValue(float input) const
Chris@38: {
Chris@38:     int value;
Chris@37: 
Chris@40:     switch (m_colourScale) {
Chris@40: 	
Chris@40:     default:
Chris@40:     case LinearColourScale:
Chris@40: 	value = int
Chris@40: 	    (input * (m_normalizeColumns ? 1.0 : 50.0) * 255.0) + 1;
Chris@40: 	break;
Chris@40: 	
Chris@40:     case MeterColourScale:
Chris@40: 	value = AudioLevel::multiplier_to_preview
Chris@40: 	    (input * (m_normalizeColumns ? 1.0 : 50.0), 255) + 1;
Chris@40: 	break;
Chris@40: 	
Chris@40:     case dBColourScale:
Chris@40: 	input = 20.0 * log10(input);
Chris@40: 	input = (input + 80.0) / 80.0;
Chris@40: 	if (input < 0.0) input = 0.0;
Chris@40: 	if (input > 1.0) input = 1.0;
Chris@40: 	value = int(input * 255.0) + 1;
Chris@40: 	break;
Chris@40: 	
Chris@40:     case PhaseColourScale:
Chris@40: 	value = int((input * 127.0 / M_PI) + 128);
Chris@40: 	break;
Chris@0:     }
Chris@38:     
Chris@38:     if (value > UCHAR_MAX) value = UCHAR_MAX;
Chris@38:     if (value < 0) value = 0;
Chris@38:     return value;
Chris@0: }
Chris@0: 
Chris@40: float
Chris@40: SpectrogramLayer::getInputForDisplayValue(unsigned char uc) const
Chris@40: {
Chris@40:     int value = uc;
Chris@40:     float input;
Chris@40: 
Chris@40:     switch (m_colourScale) {
Chris@40: 	
Chris@40:     default:
Chris@40:     case LinearColourScale:
Chris@40: 	input = float(value - 1) / 255.0 / (m_normalizeColumns ? 1 : 50);
Chris@40: 	break;
Chris@40:     
Chris@40:     case MeterColourScale:
Chris@40: 	input = AudioLevel::preview_to_multiplier(value - 1, 255)
Chris@40: 	    / (m_normalizeColumns ? 1.0 : 50.0);
Chris@40: 	break;
Chris@40: 
Chris@40:     case dBColourScale:
Chris@40: 	input = float(value - 1) / 255.0;
Chris@40: 	input = (input * 80.0) - 80.0;
Chris@40: 	input = powf(10.0, input) / 20.0;
Chris@40: 	value = int(input);
Chris@40: 	break;
Chris@40: 
Chris@40:     case PhaseColourScale:
Chris@40: 	input = float(value - 128) * M_PI / 127.0;
Chris@40: 	break;
Chris@40:     }
Chris@40: 
Chris@40:     return input;
Chris@40: }
Chris@40: 
Chris@38: 
Chris@38: SpectrogramLayer::Cache::Cache() :
Chris@38:     m_width(0),
Chris@38:     m_height(0),
Chris@38:     m_magnitude(0),
Chris@38:     m_phase(0),
Chris@38:     m_factor(0)
Chris@31: {
Chris@31: }
Chris@31: 
Chris@31: SpectrogramLayer::Cache::~Cache()
Chris@31: {
Chris@44:     for (size_t i = 0; i < m_width; ++i) {
Chris@38: 	if (m_magnitude && m_magnitude[i]) free(m_magnitude[i]);
Chris@38: 	if (m_phase && m_phase[i]) free(m_phase[i]);
Chris@38:     }
Chris@38: 
Chris@38:     if (m_magnitude) free(m_magnitude);
Chris@38:     if (m_phase) free(m_phase);
Chris@38:     if (m_factor) free(m_factor);
Chris@31: }
Chris@31: 
Chris@35: void
Chris@35: SpectrogramLayer::Cache::resize(size_t width, size_t height)
Chris@35: {
Chris@55:     std::cerr << "SpectrogramLayer::Cache[" << this << "]::resize(" << width << "x" << height << " = " << width*height << ")" << std::endl;
Chris@38:     
Chris@38:     if (m_width == width && m_height == height) return;
Chris@35: 
Chris@38:     resize(m_magnitude, width, height);
Chris@38:     resize(m_phase, width, height);
Chris@31: 
Chris@38:     m_factor = (float *)realloc(m_factor, width * sizeof(float));
Chris@31: 
Chris@38:     m_width = width;
Chris@38:     m_height = height;
Chris@41: 
Chris@41:     std::cerr << "done, width = " << m_width << " height = " << m_height << std::endl;
Chris@31: }
Chris@31: 
Chris@31: void
Chris@38: SpectrogramLayer::Cache::resize(uint16_t **&array, size_t width, size_t height)
Chris@31: {
Chris@44:     for (size_t i = width; i < m_width; ++i) {
Chris@38: 	free(array[i]);
Chris@38:     }
Chris@31: 
Chris@44:     if (width != m_width) {
Chris@44: 	array = (uint16_t **)realloc(array, width * sizeof(uint16_t *));
Chris@38: 	if (!array) throw std::bad_alloc();
Chris@44: 	MUNLOCK(array, width * sizeof(uint16_t *));
Chris@38:     }
Chris@38: 
Chris@44:     for (size_t i = m_width; i < width; ++i) {
Chris@38: 	array[i] = 0;
Chris@38:     }
Chris@38: 
Chris@44:     for (size_t i = 0; i < width; ++i) {
Chris@44: 	array[i] = (uint16_t *)realloc(array[i], height * sizeof(uint16_t));
Chris@38: 	if (!array[i]) throw std::bad_alloc();
Chris@44: 	MUNLOCK(array[i], height * sizeof(uint16_t));
Chris@38:     }
Chris@31: }
Chris@31: 
Chris@31: void
Chris@38: SpectrogramLayer::Cache::reset()
Chris@31: {
Chris@38:     for (size_t x = 0; x < m_width; ++x) {
Chris@38: 	for (size_t y = 0; y < m_height; ++y) {
Chris@44: 	    m_magnitude[x][y] = 0;
Chris@44: 	    m_phase[x][y] = 0;
Chris@38: 	}
Chris@40: 	m_factor[x] = 1.0;
Chris@31:     }
Chris@38: }	    
Chris@31: 
Chris@0: void
Chris@0: SpectrogramLayer::CacheFillThread::run()
Chris@0: {
Chris@0: //    std::cerr << "SpectrogramLayer::CacheFillThread::run" << std::endl;
Chris@0: 
Chris@0:     m_layer.m_mutex.lock();
Chris@0: 
Chris@0:     while (!m_layer.m_exiting) {
Chris@0: 
Chris@0: 	bool interrupted = false;
Chris@0: 
Chris@0: //	std::cerr << "SpectrogramLayer::CacheFillThread::run in loop" << std::endl;
Chris@0: 
Chris@48: 	bool haveUndormantViews = false;
Chris@48: 
Chris@48: 	for (std::map<const void *, bool>::iterator i =
Chris@48: 		 m_layer.m_dormancy.begin();
Chris@48: 	     i != m_layer.m_dormancy.end(); ++i) {
Chris@48: 
Chris@48: 	    if (!i->second) {
Chris@48: 		haveUndormantViews = true;
Chris@48: 		break;
Chris@48: 	    }
Chris@48: 	}
Chris@48: 
Chris@48: 	if (!haveUndormantViews) {
Chris@48: 
Chris@48: 	    if (m_layer.m_cacheInvalid && m_layer.m_cache) {
Chris@48: 		std::cerr << "All views dormant, freeing spectrogram cache"
Chris@48: 			  << std::endl;
Chris@47: 	
Chris@34: 		delete m_layer.m_cache;
Chris@34: 		m_layer.m_cache = 0;
Chris@34: 	    }
Chris@34: 
Chris@34: 	} else if (m_layer.m_model && m_layer.m_cacheInvalid) {
Chris@0: 
Chris@0: //	    std::cerr << "SpectrogramLayer::CacheFillThread::run: something to do" << std::endl;
Chris@0: 
Chris@0: 	    while (!m_layer.m_model->isReady()) {
Chris@0: 		m_layer.m_condition.wait(&m_layer.m_mutex, 100);
Chris@48: 		if (m_layer.m_exiting) break;
Chris@0: 	    }
Chris@0: 
Chris@48: 	    if (m_layer.m_exiting) break;
Chris@48: 
Chris@0: 	    m_layer.m_cacheInvalid = false;
Chris@0: 	    m_fillExtent = 0;
Chris@0: 	    m_fillCompletion = 0;
Chris@0: 
Chris@0: 	    std::cerr << "SpectrogramLayer::CacheFillThread::run: model is ready" << std::endl;
Chris@0: 
Chris@0: 	    size_t start = m_layer.m_model->getStartFrame();
Chris@0: 	    size_t end = m_layer.m_model->getEndFrame();
Chris@9: 
Chris@41: 	    std::cerr << "start = " << start << ", end = " << end << std::endl;
Chris@41: 
Chris@9: 	    WindowType windowType = m_layer.m_windowType;
Chris@0: 	    size_t windowSize = m_layer.m_windowSize;
Chris@0: 	    size_t windowIncrement = m_layer.getWindowIncrement();
Chris@0: 
Chris@44: 	    size_t visibleStart = m_layer.m_candidateFillStartFrame;
Chris@44: 	    visibleStart = (visibleStart / windowIncrement) * windowIncrement;
Chris@0: 
Chris@9: 	    size_t width = (end - start) / windowIncrement + 1;
Chris@9: 	    size_t height = windowSize / 2;
Chris@35: 
Chris@35: 	    if (!m_layer.m_cache) {
Chris@38: 		m_layer.m_cache = new Cache;
Chris@35: 	    }
Chris@9: 
Chris@38: 	    m_layer.m_cache->resize(width, height);
Chris@0: 	    m_layer.setCacheColourmap();
Chris@43: //!!!	    m_layer.m_cache->reset();
Chris@35: 
Chris@33: 	    // We don't need a lock when writing to or reading from
Chris@38: 	    // the pixels in the cache.  We do need to ensure we have
Chris@38: 	    // the width and height of the cache and the FFT
Chris@38: 	    // parameters known before we unlock, in case they change
Chris@38: 	    // in the model while we aren't holding a lock.  It's safe
Chris@38: 	    // for us to continue to use the "old" values if that
Chris@38: 	    // happens, because they will continue to match the
Chris@38: 	    // dimensions of the actual cache (which we manage, not
Chris@38: 	    // the model).
Chris@0: 	    m_layer.m_mutex.unlock();
Chris@0: 
Chris@0: 	    double *input = (double *)
Chris@0: 		fftw_malloc(windowSize * sizeof(double));
Chris@0: 
Chris@0: 	    fftw_complex *output = (fftw_complex *)
Chris@0: 		fftw_malloc(windowSize * sizeof(fftw_complex));
Chris@0: 
Chris@0: 	    fftw_plan plan = fftw_plan_dft_r2c_1d(windowSize, input,
Chris@1: 						  output, FFTW_ESTIMATE);
Chris@0: 
Chris@9: 	    Window<double> windower(windowType, windowSize);
Chris@0: 
Chris@0: 	    if (!plan) {
Chris@1: 		std::cerr << "WARNING: fftw_plan_dft_r2c_1d(" << windowSize << ") failed!" << std::endl;
Chris@0: 		fftw_free(input);
Chris@0: 		fftw_free(output);
Chris@37: 		m_layer.m_mutex.lock();
Chris@0: 		continue;
Chris@0: 	    }
Chris@0: 
Chris@0: 	    int counter = 0;
Chris@0: 	    int updateAt = (end / windowIncrement) / 20;
Chris@0: 	    if (updateAt < 100) updateAt = 100;
Chris@0: 
Chris@44: 	    bool doVisibleFirst = (visibleStart != start);
Chris@0: 
Chris@0: 	    if (doVisibleFirst) {
Chris@0: 
Chris@44: 		for (size_t f = visibleStart; f < end; f += windowIncrement) {
Chris@0: 	    
Chris@38: 		    m_layer.fillCacheColumn(int((f - start) / windowIncrement),
Chris@38: 					    input, output, plan,
Chris@38: 					    windowSize, windowIncrement,
Chris@38: 					    windower);
Chris@38: 
Chris@38: 		    if (m_layer.m_cacheInvalid || m_layer.m_exiting) {
Chris@0: 			interrupted = true;
Chris@0: 			m_fillExtent = 0;
Chris@0: 			break;
Chris@0: 		    }
Chris@0: 
Chris@38: 		    if (++counter == updateAt) {
Chris@37: 			m_fillExtent = f;
Chris@0: 			m_fillCompletion = size_t(100 * fabsf(float(f - visibleStart) /
Chris@0: 							      float(end - start)));
Chris@0: 			counter = 0;
Chris@0: 		    }
Chris@0: 		}
Chris@0: 	    }
Chris@0: 
Chris@0: 	    if (!interrupted) {
Chris@0: 
Chris@0: 		size_t remainingEnd = end;
Chris@0: 		if (doVisibleFirst) {
Chris@0: 		    remainingEnd = visibleStart;
Chris@0: 		    if (remainingEnd > start) --remainingEnd;
Chris@0: 		    else remainingEnd = start;
Chris@0: 		}
Chris@0: 		size_t baseCompletion = m_fillCompletion;
Chris@0: 
Chris@0: 		for (size_t f = start; f < remainingEnd; f += windowIncrement) {
Chris@0: 
Chris@38: 		    m_layer.fillCacheColumn(int((f - start) / windowIncrement),
Chris@38: 					    input, output, plan,
Chris@38: 					    windowSize, windowIncrement,
Chris@38: 					    windower);
Chris@38: 
Chris@38: 		    if (m_layer.m_cacheInvalid || m_layer.m_exiting) {
Chris@0: 			interrupted = true;
Chris@0: 			m_fillExtent = 0;
Chris@0: 			break;
Chris@0: 		    }
Chris@0: 		    
Chris@44: 		    if (++counter == updateAt) {
Chris@0: 			m_fillExtent = f;
Chris@0: 			m_fillCompletion = baseCompletion +
Chris@0: 			    size_t(100 * fabsf(float(f - start) /
Chris@0: 					       float(end - start)));
Chris@0: 			counter = 0;
Chris@0: 		    }
Chris@0: 		}
Chris@0: 	    }
Chris@0: 
Chris@0: 	    fftw_destroy_plan(plan);
Chris@0: 	    fftw_free(output);
Chris@0: 	    fftw_free(input);
Chris@0: 
Chris@0: 	    if (!interrupted) {
Chris@0: 		m_fillExtent = end;
Chris@0: 		m_fillCompletion = 100;
Chris@0: 	    }
Chris@0: 
Chris@0: 	    m_layer.m_mutex.lock();
Chris@0: 	}
Chris@0: 
Chris@0: 	if (!interrupted) m_layer.m_condition.wait(&m_layer.m_mutex, 2000);
Chris@0:     }
Chris@0: }
Chris@0: 
Chris@40: float
Chris@40: SpectrogramLayer::getEffectiveMinFrequency() const
Chris@40: {
Chris@40:     int sr = m_model->getSampleRate();
Chris@40:     float minf = float(sr) / m_windowSize;
Chris@40: 
Chris@40:     if (m_minFrequency > 0.0) {
Chris@40: 	size_t minbin = size_t((double(m_minFrequency) * m_windowSize) / sr + 0.01);
Chris@40: 	if (minbin < 1) minbin = 1;
Chris@40: 	minf = minbin * sr / m_windowSize;
Chris@40:     }
Chris@40: 
Chris@40:     return minf;
Chris@40: }
Chris@40: 
Chris@40: float
Chris@40: SpectrogramLayer::getEffectiveMaxFrequency() const
Chris@40: {
Chris@40:     int sr = m_model->getSampleRate();
Chris@40:     float maxf = float(sr) / 2;
Chris@40: 
Chris@40:     if (m_maxFrequency > 0.0) {
Chris@40: 	size_t maxbin = size_t((double(m_maxFrequency) * m_windowSize) / sr + 0.1);
Chris@40: 	if (maxbin > m_windowSize / 2) maxbin = m_windowSize / 2;
Chris@40: 	maxf = maxbin * sr / m_windowSize;
Chris@40:     }
Chris@40: 
Chris@40:     return maxf;
Chris@40: }
Chris@40: 
Chris@0: bool
Chris@44: SpectrogramLayer::getYBinRange(View *v, int y, float &q0, float &q1) const
Chris@0: {
Chris@44:     int h = v->height();
Chris@0:     if (y < 0 || y >= h) return false;
Chris@0: 
Chris@38:     int sr = m_model->getSampleRate();
Chris@40:     float minf = getEffectiveMinFrequency();
Chris@40:     float maxf = getEffectiveMaxFrequency();
Chris@0: 
Chris@38:     bool logarithmic = (m_frequencyScale == LogFrequencyScale);
Chris@38: 
Chris@44:     q0 = v->getFrequencyForY(y, minf, maxf, logarithmic);
Chris@44:     q1 = v->getFrequencyForY(y - 1, minf, maxf, logarithmic);
Chris@38: 
Chris@38:     // Now map these on to actual bins
Chris@38: 
Chris@40:     int b0 = int((q0 * m_windowSize) / sr);
Chris@40:     int b1 = int((q1 * m_windowSize) / sr);
Chris@0:     
Chris@40:     //!!! this is supposed to return fractions-of-bins, as it were, hence the floats
Chris@38:     q0 = b0;
Chris@38:     q1 = b1;
Chris@38:     
Chris@38: //    q0 = (b0 * sr) / m_windowSize;
Chris@38: //    q1 = (b1 * sr) / m_windowSize;
Chris@0: 
Chris@0:     return true;
Chris@0: }
Chris@38:     
Chris@0: bool
Chris@44: SpectrogramLayer::getXBinRange(View *v, int x, float &s0, float &s1) const
Chris@0: {
Chris@21:     size_t modelStart = m_model->getStartFrame();
Chris@21:     size_t modelEnd = m_model->getEndFrame();
Chris@0: 
Chris@0:     // Each pixel column covers an exact range of sample frames:
Chris@44:     int f0 = v->getFrameForX(x) - modelStart;
Chris@44:     int f1 = v->getFrameForX(x + 1) - modelStart - 1;
Chris@20: 
Chris@41:     if (f1 < int(modelStart) || f0 > int(modelEnd)) {
Chris@41: 	return false;
Chris@41:     }
Chris@20:       
Chris@0:     // And that range may be drawn from a possibly non-integral
Chris@0:     // range of spectrogram windows:
Chris@0: 
Chris@0:     size_t windowIncrement = getWindowIncrement();
Chris@0:     s0 = float(f0) / windowIncrement;
Chris@0:     s1 = float(f1) / windowIncrement;
Chris@0: 
Chris@0:     return true;
Chris@0: }
Chris@0:  
Chris@0: bool
Chris@44: SpectrogramLayer::getXBinSourceRange(View *v, int x, RealTime &min, RealTime &max) const
Chris@0: {
Chris@0:     float s0 = 0, s1 = 0;
Chris@44:     if (!getXBinRange(v, x, s0, s1)) return false;
Chris@0:     
Chris@0:     int s0i = int(s0 + 0.001);
Chris@0:     int s1i = int(s1);
Chris@0: 
Chris@0:     int windowIncrement = getWindowIncrement();
Chris@0:     int w0 = s0i * windowIncrement - (m_windowSize - windowIncrement)/2;
Chris@0:     int w1 = s1i * windowIncrement + windowIncrement +
Chris@0: 	(m_windowSize - windowIncrement)/2 - 1;
Chris@0:     
Chris@0:     min = RealTime::frame2RealTime(w0, m_model->getSampleRate());
Chris@0:     max = RealTime::frame2RealTime(w1, m_model->getSampleRate());
Chris@0:     return true;
Chris@0: }
Chris@0: 
Chris@0: bool
Chris@44: SpectrogramLayer::getYBinSourceRange(View *v, int y, float &freqMin, float &freqMax)
Chris@0: const
Chris@0: {
Chris@0:     float q0 = 0, q1 = 0;
Chris@44:     if (!getYBinRange(v, y, q0, q1)) return false;
Chris@0: 
Chris@0:     int q0i = int(q0 + 0.001);
Chris@0:     int q1i = int(q1);
Chris@0: 
Chris@0:     int sr = m_model->getSampleRate();
Chris@0: 
Chris@0:     for (int q = q0i; q <= q1i; ++q) {
Chris@35: 	int binfreq = (sr * q) / m_windowSize;
Chris@0: 	if (q == q0i) freqMin = binfreq;
Chris@0: 	if (q == q1i) freqMax = binfreq;
Chris@0:     }
Chris@0:     return true;
Chris@0: }
Chris@35: 
Chris@35: bool
Chris@44: SpectrogramLayer::getAdjustedYBinSourceRange(View *v, int x, int y,
Chris@35: 					     float &freqMin, float &freqMax,
Chris@35: 					     float &adjFreqMin, float &adjFreqMax)
Chris@35: const
Chris@35: {
Chris@35:     float s0 = 0, s1 = 0;
Chris@44:     if (!getXBinRange(v, x, s0, s1)) return false;
Chris@35: 
Chris@35:     float q0 = 0, q1 = 0;
Chris@44:     if (!getYBinRange(v, y, q0, q1)) return false;
Chris@35: 
Chris@35:     int s0i = int(s0 + 0.001);
Chris@35:     int s1i = int(s1);
Chris@35: 
Chris@35:     int q0i = int(q0 + 0.001);
Chris@35:     int q1i = int(q1);
Chris@35: 
Chris@35:     int sr = m_model->getSampleRate();
Chris@35: 
Chris@38:     size_t windowSize = m_windowSize;
Chris@38:     size_t windowIncrement = getWindowIncrement();
Chris@38: 
Chris@35:     bool haveAdj = false;
Chris@35: 
Chris@37:     bool peaksOnly = (m_binDisplay == PeakBins ||
Chris@37: 		      m_binDisplay == PeakFrequencies);
Chris@37: 
Chris@35:     for (int q = q0i; q <= q1i; ++q) {
Chris@35: 
Chris@35: 	for (int s = s0i; s <= s1i; ++s) {
Chris@35: 
Chris@35: 	    float binfreq = (sr * q) / m_windowSize;
Chris@35: 	    if (q == q0i) freqMin = binfreq;
Chris@35: 	    if (q == q1i) freqMax = binfreq;
Chris@37: 
Chris@38: 	    if (!m_cache || m_cacheInvalid) break; //!!! lock?
Chris@38: 
Chris@38: 	    if (peaksOnly && !m_cache->isLocalPeak(s, q)) continue;
Chris@38: 
Chris@38: 	    if (!m_cache->isOverThreshold(s, q, m_threshold)) continue;
Chris@38: 
Chris@38: 	    float freq = binfreq;
Chris@38: 	    bool steady = false;
Chris@40: 	    
Chris@40: 	    if (s < int(m_cache->getWidth()) - 1) {
Chris@38: 
Chris@38: 		freq = calculateFrequency(q, 
Chris@38: 					  windowSize,
Chris@38: 					  windowIncrement,
Chris@38: 					  sr, 
Chris@38: 					  m_cache->getPhaseAt(s, q),
Chris@38: 					  m_cache->getPhaseAt(s+1, q),
Chris@38: 					  steady);
Chris@35: 	    
Chris@38: 		if (!haveAdj || freq < adjFreqMin) adjFreqMin = freq;
Chris@38: 		if (!haveAdj || freq > adjFreqMax) adjFreqMax = freq;
Chris@35: 
Chris@35: 		haveAdj = true;
Chris@35: 	    }
Chris@35: 	}
Chris@35:     }
Chris@35: 
Chris@35:     if (!haveAdj) {
Chris@40: 	adjFreqMin = adjFreqMax = 0.0;
Chris@35:     }
Chris@35: 
Chris@35:     return haveAdj;
Chris@35: }
Chris@0:     
Chris@0: bool
Chris@44: SpectrogramLayer::getXYBinSourceRange(View *v, int x, int y,
Chris@38: 				      float &min, float &max,
Chris@38: 				      float &phaseMin, float &phaseMax) const
Chris@0: {
Chris@0:     float q0 = 0, q1 = 0;
Chris@44:     if (!getYBinRange(v, y, q0, q1)) return false;
Chris@0: 
Chris@0:     float s0 = 0, s1 = 0;
Chris@44:     if (!getXBinRange(v, x, s0, s1)) return false;
Chris@0:     
Chris@0:     int q0i = int(q0 + 0.001);
Chris@0:     int q1i = int(q1);
Chris@0: 
Chris@0:     int s0i = int(s0 + 0.001);
Chris@0:     int s1i = int(s1);
Chris@0: 
Chris@37:     bool rv = false;
Chris@37: 
Chris@0:     if (m_mutex.tryLock()) {
Chris@0: 	if (m_cache && !m_cacheInvalid) {
Chris@0: 
Chris@31: 	    int cw = m_cache->getWidth();
Chris@31: 	    int ch = m_cache->getHeight();
Chris@0: 
Chris@38: 	    min = 0.0;
Chris@38: 	    max = 0.0;
Chris@38: 	    phaseMin = 0.0;
Chris@38: 	    phaseMax = 0.0;
Chris@38: 	    bool have = false;
Chris@0: 
Chris@0: 	    for (int q = q0i; q <= q1i; ++q) {
Chris@0: 		for (int s = s0i; s <= s1i; ++s) {
Chris@0: 		    if (s >= 0 && q >= 0 && s < cw && q < ch) {
Chris@38: 
Chris@38: 			float value;
Chris@38: 
Chris@38: 			value = m_cache->getPhaseAt(s, q);
Chris@38: 			if (!have || value < phaseMin) { phaseMin = value; }
Chris@38: 			if (!have || value > phaseMax) { phaseMax = value; }
Chris@38: 
Chris@38: 			value = m_cache->getMagnitudeAt(s, q);
Chris@38: 			if (!have || value < min) { min = value; }
Chris@38: 			if (!have || value > max) { max = value; }
Chris@38: 
Chris@38: 			have = true;
Chris@0: 		    }	
Chris@0: 		}
Chris@0: 	    }
Chris@0: 
Chris@38: 	    if (have) {
Chris@37: 		rv = true;
Chris@37: 	    }
Chris@0: 	}
Chris@0: 
Chris@0: 	m_mutex.unlock();
Chris@0:     }
Chris@0: 
Chris@37:     return rv;
Chris@0: }
Chris@0:    
Chris@0: void
Chris@44: SpectrogramLayer::paint(View *v, QPainter &paint, QRect rect) const
Chris@0: {
Chris@55:     if (m_colourScheme == BlackOnWhite) {
Chris@55: 	v->setLightBackground(true);
Chris@55:     } else {
Chris@55: 	v->setLightBackground(false);
Chris@55:     }
Chris@55: 
Chris@0: //    Profiler profiler("SpectrogramLayer::paint", true);
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@44:     std::cerr << "SpectrogramLayer::paint(): m_model is " << m_model << ", zoom level is " << v->getZoomLevel() << ", m_updateTimer " << m_updateTimer << ", pixmap cache invalid " << m_pixmapCacheInvalid << std::endl;
Chris@0: #endif
Chris@45:     
Chris@45:     long sf = v->getStartFrame();
Chris@45:     if (sf < 0) m_candidateFillStartFrame = 0;
Chris@45:     else m_candidateFillStartFrame = sf;
Chris@44: 
Chris@0:     if (!m_model || !m_model->isOK() || !m_model->isReady()) {
Chris@0: 	return;
Chris@0:     }
Chris@0: 
Chris@47:     if (isLayerDormant(v)) {
Chris@48: 	std::cerr << "SpectrogramLayer::paint(): Layer is dormant, making it undormant again" << std::endl;
Chris@29:     }
Chris@29: 
Chris@48:     // Need to do this even if !isLayerDormant, as that could mean v
Chris@48:     // is not in the dormancy map at all -- we need it to be present
Chris@48:     // and accountable for when determining whether we need the cache
Chris@48:     // in the cache-fill thread above.
Chris@48:     m_dormancy[v] = false;
Chris@48: 
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0:     std::cerr << "SpectrogramLayer::paint(): About to lock" << std::endl;
Chris@0: #endif
Chris@0: 
Chris@37:     m_mutex.lock();
Chris@0: 
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0:     std::cerr << "SpectrogramLayer::paint(): locked" << std::endl;
Chris@0: #endif
Chris@0: 
Chris@0:     if (m_cacheInvalid) { // lock the mutex before checking this
Chris@0: 	m_mutex.unlock();
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0: 	std::cerr << "SpectrogramLayer::paint(): Cache invalid, returning" << std::endl;
Chris@0: #endif
Chris@0: 	return;
Chris@0:     }
Chris@0: 
Chris@0:     bool stillCacheing = (m_updateTimer != 0);
Chris@0: 
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0:     std::cerr << "SpectrogramLayer::paint(): Still cacheing = " << stillCacheing << std::endl;
Chris@0: #endif
Chris@0: 
Chris@44:     long startFrame = v->getStartFrame();
Chris@44:     int zoomLevel = v->getZoomLevel();
Chris@0: 
Chris@0:     int x0 = 0;
Chris@44:     int x1 = v->width();
Chris@0:     int y0 = 0;
Chris@44:     int y1 = v->height();
Chris@0: 
Chris@0:     bool recreateWholePixmapCache = true;
Chris@0: 
Chris@0:     if (!m_pixmapCacheInvalid) {
Chris@0: 
Chris@0: 	//!!! This cache may have been obsoleted entirely by the
Chris@0: 	//scrolling cache in View.  Perhaps experiment with
Chris@0: 	//removing it and see if it makes things even quicker (or else
Chris@0: 	//make it optional)
Chris@0: 
Chris@0: 	if (int(m_pixmapCacheZoomLevel) == zoomLevel &&
Chris@44: 	    m_pixmapCache->width() == v->width() &&
Chris@44: 	    m_pixmapCache->height() == v->height()) {
Chris@44: 
Chris@44: 	    if (v->getXForFrame(m_pixmapCacheStartFrame) ==
Chris@44: 		v->getXForFrame(startFrame)) {
Chris@0: 	    
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0: 		std::cerr << "SpectrogramLayer: pixmap cache good" << std::endl;
Chris@0: #endif
Chris@0: 
Chris@0: 		m_mutex.unlock();
Chris@0: 		paint.drawPixmap(rect, *m_pixmapCache, rect);
Chris@0: 		return;
Chris@0: 
Chris@0: 	    } else {
Chris@0: 
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0: 		std::cerr << "SpectrogramLayer: pixmap cache partially OK" << std::endl;
Chris@0: #endif
Chris@0: 
Chris@0: 		recreateWholePixmapCache = false;
Chris@0: 
Chris@44: 		int dx = v->getXForFrame(m_pixmapCacheStartFrame) -
Chris@44: 		         v->getXForFrame(startFrame);
Chris@0: 
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0: 		std::cerr << "SpectrogramLayer: dx = " << dx << " (pixmap cache " << m_pixmapCache->width() << "x" << m_pixmapCache->height() << ")" << std::endl;
Chris@0: #endif
Chris@0: 
Chris@0: 		if (dx > -m_pixmapCache->width() && dx < m_pixmapCache->width()) {
Chris@0: 
Chris@0: #if defined(Q_WS_WIN32) || defined(Q_WS_MAC)
Chris@0: 		    // Copying a pixmap to itself doesn't work
Chris@0: 		    // properly on Windows or Mac (it only works when
Chris@0: 		    // moving in one direction).
Chris@0: 
Chris@0: 		    //!!! Need a utility function for this
Chris@0: 
Chris@0: 		    static QPixmap *tmpPixmap = 0;
Chris@0: 		    if (!tmpPixmap ||
Chris@0: 			tmpPixmap->width() != m_pixmapCache->width() ||
Chris@0: 			tmpPixmap->height() != m_pixmapCache->height()) {
Chris@0: 			delete tmpPixmap;
Chris@0: 			tmpPixmap = new QPixmap(m_pixmapCache->width(),
Chris@0: 						m_pixmapCache->height());
Chris@0: 		    }
Chris@0: 		    QPainter cachePainter;
Chris@0: 		    cachePainter.begin(tmpPixmap);
Chris@0: 		    cachePainter.drawPixmap(0, 0, *m_pixmapCache);
Chris@0: 		    cachePainter.end();
Chris@0: 		    cachePainter.begin(m_pixmapCache);
Chris@0: 		    cachePainter.drawPixmap(dx, 0, *tmpPixmap);
Chris@0: 		    cachePainter.end();
Chris@0: #else
Chris@0: 		    QPainter cachePainter(m_pixmapCache);
Chris@0: 		    cachePainter.drawPixmap(dx, 0, *m_pixmapCache);
Chris@0: 		    cachePainter.end();
Chris@0: #endif
Chris@0: 
Chris@0: 		    paint.drawPixmap(rect, *m_pixmapCache, rect);
Chris@0: 
Chris@0: 		    if (dx < 0) {
Chris@0: 			x0 = m_pixmapCache->width() + dx;
Chris@0: 			x1 = m_pixmapCache->width();
Chris@0: 		    } else {
Chris@0: 			x0 = 0;
Chris@0: 			x1 = dx;
Chris@0: 		    }
Chris@0: 		}
Chris@0: 	    }
Chris@0: 	} else {
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0: 	    std::cerr << "SpectrogramLayer: pixmap cache useless" << std::endl;
Chris@0: #endif
Chris@0: 	}
Chris@0:     }
Chris@0: 
Chris@0:     if (stillCacheing) {
Chris@0: 	x0 = rect.left();
Chris@0: 	x1 = rect.right() + 1;
Chris@0: 	y0 = rect.top();
Chris@0: 	y1 = rect.bottom() + 1;
Chris@0:     }
Chris@0: 
Chris@0:     int w = x1 - x0;
Chris@0:     int h = y1 - y0;
Chris@0: 
Chris@0: //    std::cerr << "x0 " << x0 << ", x1 " << x1 << ", w " << w << ", h " << h << std::endl;
Chris@0: 
Chris@0:     QImage scaled(w, h, QImage::Format_RGB32);
Chris@41:     scaled.fill(m_cache->getColour(0).rgb());
Chris@35: 
Chris@35:     float ymag[h];
Chris@35:     float ydiv[h];
Chris@37: 
Chris@37:     int sr = m_model->getSampleRate();
Chris@35:     
Chris@35:     size_t bins = m_windowSize / 2;
Chris@35:     if (m_maxFrequency > 0) {
Chris@35: 	bins = int((double(m_maxFrequency) * m_windowSize) / sr + 0.1);
Chris@35: 	if (bins > m_windowSize / 2) bins = m_windowSize / 2;
Chris@35:     }
Chris@35: 	
Chris@40:     size_t minbin = 1;
Chris@37:     if (m_minFrequency > 0) {
Chris@37: 	minbin = int((double(m_minFrequency) * m_windowSize) / sr + 0.1);
Chris@40: 	if (minbin < 1) minbin = 1;
Chris@37: 	if (minbin >= bins) minbin = bins - 1;
Chris@37:     }
Chris@37: 
Chris@37:     float minFreq = (float(minbin) * sr) / m_windowSize;
Chris@35:     float maxFreq = (float(bins) * sr) / m_windowSize;
Chris@0: 
Chris@38:     size_t increment = getWindowIncrement();
Chris@40:     
Chris@40:     bool logarithmic = (m_frequencyScale == LogFrequencyScale);
Chris@38: 
Chris@0:     m_mutex.unlock();
Chris@0: 
Chris@35:     for (int x = 0; x < w; ++x) {
Chris@35: 
Chris@35: 	m_mutex.lock();
Chris@35: 	if (m_cacheInvalid) {
Chris@35: 	    m_mutex.unlock();
Chris@35: 	    break;
Chris@35: 	}
Chris@35: 
Chris@35: 	for (int y = 0; y < h; ++y) {
Chris@40: 	    ymag[y] = 0.0;
Chris@40: 	    ydiv[y] = 0.0;
Chris@35: 	}
Chris@35: 
Chris@35: 	float s0 = 0, s1 = 0;
Chris@35: 
Chris@44: 	if (!getXBinRange(v, x0 + x, s0, s1)) {
Chris@35: 	    assert(x <= scaled.width());
Chris@35: 	    m_mutex.unlock();
Chris@35: 	    continue;
Chris@35: 	}
Chris@35: 
Chris@35: 	int s0i = int(s0 + 0.001);
Chris@35: 	int s1i = int(s1);
Chris@35: 
Chris@45: 	if (s1i >= m_cache->getWidth()) {
Chris@45: 	    if (s0i >= m_cache->getWidth()) {
Chris@45: 		m_mutex.unlock();
Chris@45: 		continue;
Chris@45: 	    } else {
Chris@45: 		s1i = s0i;
Chris@45: 	    }
Chris@45: 	}
Chris@45: 
Chris@38: 	for (size_t q = minbin; q < bins; ++q) {
Chris@35: 
Chris@40: 	    float f0 = (float(q) * sr) / m_windowSize;
Chris@40: 	    float f1 = (float(q + 1) * sr) / m_windowSize;
Chris@40: 
Chris@40: 	    float y0 = 0, y1 = 0;
Chris@40: 
Chris@45: 	    if (m_binDisplay != PeakFrequencies) {
Chris@44: 		y0 = v->getYForFrequency(f1, minFreq, maxFreq, logarithmic);
Chris@44: 		y1 = v->getYForFrequency(f0, minFreq, maxFreq, logarithmic);
Chris@40: 	    }
Chris@40: 
Chris@35: 	    for (int s = s0i; s <= s1i; ++s) {
Chris@35: 
Chris@40: 		if (m_binDisplay == PeakBins ||
Chris@40: 		    m_binDisplay == PeakFrequencies) {
Chris@40: 		    if (!m_cache->isLocalPeak(s, q)) continue;
Chris@40: 		}
Chris@40: 		
Chris@40: 		if (!m_cache->isOverThreshold(s, q, m_threshold)) continue;
Chris@40: 
Chris@35: 		float sprop = 1.0;
Chris@35: 		if (s == s0i) sprop *= (s + 1) - s0;
Chris@35: 		if (s == s1i) sprop *= s1 - s;
Chris@35:  
Chris@38: 		if (m_binDisplay == PeakFrequencies &&
Chris@40: 		    s < int(m_cache->getWidth()) - 1) {
Chris@35: 
Chris@38: 		    bool steady = false;
Chris@38: 		    f0 = f1 = calculateFrequency(q,
Chris@38: 						 m_windowSize,
Chris@38: 						 increment,
Chris@38: 						 sr,
Chris@38: 						 m_cache->getPhaseAt(s, q),
Chris@38: 						 m_cache->getPhaseAt(s+1, q),
Chris@38: 						 steady);
Chris@40: 
Chris@44: 		    y0 = y1 = v->getYForFrequency
Chris@40: 			(f0, minFreq, maxFreq, logarithmic);
Chris@35: 		}
Chris@38: 		
Chris@35: 		int y0i = int(y0 + 0.001);
Chris@35: 		int y1i = int(y1);
Chris@35: 
Chris@35: 		for (int y = y0i; y <= y1i; ++y) {
Chris@35: 		    
Chris@35: 		    if (y < 0 || y >= h) continue;
Chris@35: 
Chris@35: 		    float yprop = sprop;
Chris@35: 		    if (y == y0i) yprop *= (y + 1) - y0;
Chris@35: 		    if (y == y1i) yprop *= y1 - y;
Chris@37: 
Chris@38: 		    float value;
Chris@38: 
Chris@38: 		    if (m_colourScale == PhaseColourScale) {
Chris@38: 			value = m_cache->getPhaseAt(s, q);
Chris@38: 		    } else if (m_normalizeColumns) {
Chris@38: 			value = m_cache->getNormalizedMagnitudeAt(s, q) * m_gain;
Chris@38: 		    } else {
Chris@38: 			value = m_cache->getMagnitudeAt(s, q) * m_gain;
Chris@38: 		    }
Chris@37: 
Chris@37: 		    ymag[y] += yprop * value;
Chris@35: 		    ydiv[y] += yprop;
Chris@35: 		}
Chris@35: 	    }
Chris@35: 	}
Chris@35: 
Chris@35: 	for (int y = 0; y < h; ++y) {
Chris@35: 
Chris@35: 	    if (ydiv[y] > 0.0) {
Chris@40: 
Chris@40: 		unsigned char pixel = 0;
Chris@40: 
Chris@38: 		float avg = ymag[y] / ydiv[y];
Chris@38: 		pixel = getDisplayValue(avg);
Chris@40: 
Chris@40: 		assert(x <= scaled.width());
Chris@40: 		QColor c = m_cache->getColour(pixel);
Chris@40: 		scaled.setPixel(x, y,
Chris@40: 				qRgb(c.red(), c.green(), c.blue()));
Chris@35: 	    }
Chris@35: 	}
Chris@35: 
Chris@35: 	m_mutex.unlock();
Chris@35:     }
Chris@35: 
Chris@0:     paint.drawImage(x0, y0, scaled);
Chris@0: 
Chris@0:     if (recreateWholePixmapCache) {
Chris@0: 	delete m_pixmapCache;
Chris@0: 	m_pixmapCache = new QPixmap(w, h);
Chris@0:     }
Chris@0: 
Chris@0:     QPainter cachePainter(m_pixmapCache);
Chris@0:     cachePainter.drawImage(x0, y0, scaled);
Chris@0:     cachePainter.end();
Chris@0:     
Chris@0:     m_pixmapCacheInvalid = false;
Chris@0:     m_pixmapCacheStartFrame = startFrame;
Chris@0:     m_pixmapCacheZoomLevel = zoomLevel;
Chris@0: 
Chris@0: #ifdef DEBUG_SPECTROGRAM_REPAINT
Chris@0:     std::cerr << "SpectrogramLayer::paint() returning" << std::endl;
Chris@0: #endif
Chris@0: }
Chris@0: 
Chris@42: float
Chris@44: SpectrogramLayer::getYForFrequency(View *v, float frequency) const
Chris@42: {
Chris@44:     return v->getYForFrequency(frequency,
Chris@44: 			       getEffectiveMinFrequency(),
Chris@44: 			       getEffectiveMaxFrequency(),
Chris@44: 			       m_frequencyScale == LogFrequencyScale);
Chris@42: }
Chris@42: 
Chris@42: float
Chris@44: SpectrogramLayer::getFrequencyForY(View *v, int y) const
Chris@42: {
Chris@44:     return v->getFrequencyForY(y,
Chris@44: 			       getEffectiveMinFrequency(),
Chris@44: 			       getEffectiveMaxFrequency(),
Chris@44: 			       m_frequencyScale == LogFrequencyScale);
Chris@42: }
Chris@42: 
Chris@0: int
Chris@0: SpectrogramLayer::getCompletion() const
Chris@0: {
Chris@0:     if (m_updateTimer == 0) return 100;
Chris@0:     size_t completion = m_fillThread->getFillCompletion();
Chris@0: //    std::cerr << "SpectrogramLayer::getCompletion: completion = " << completion << std::endl;
Chris@0:     return completion;
Chris@0: }
Chris@0: 
Chris@28: bool
Chris@44: SpectrogramLayer::snapToFeatureFrame(View *v, int &frame,
Chris@28: 				     size_t &resolution,
Chris@28: 				     SnapType snap) const
Chris@13: {
Chris@13:     resolution = getWindowIncrement();
Chris@28:     int left = (frame / resolution) * resolution;
Chris@28:     int right = left + resolution;
Chris@28: 
Chris@28:     switch (snap) {
Chris@28:     case SnapLeft:  frame = left;  break;
Chris@28:     case SnapRight: frame = right; break;
Chris@28:     case SnapNearest:
Chris@28:     case SnapNeighbouring:
Chris@28: 	if (frame - left > right - frame) frame = right;
Chris@28: 	else frame = left;
Chris@28: 	break;
Chris@28:     }
Chris@28:     
Chris@28:     return true;
Chris@28: } 
Chris@13: 
Chris@25: QString
Chris@44: SpectrogramLayer::getFeatureDescription(View *v, QPoint &pos) const
Chris@25: {
Chris@25:     int x = pos.x();
Chris@25:     int y = pos.y();
Chris@0: 
Chris@25:     if (!m_model || !m_model->isOK()) return "";
Chris@0: 
Chris@38:     float magMin = 0, magMax = 0;
Chris@38:     float phaseMin = 0, phaseMax = 0;
Chris@0:     float freqMin = 0, freqMax = 0;
Chris@35:     float adjFreqMin = 0, adjFreqMax = 0;
Chris@25:     QString pitchMin, pitchMax;
Chris@0:     RealTime rtMin, rtMax;
Chris@0: 
Chris@38:     bool haveValues = false;
Chris@0: 
Chris@44:     if (!getXBinSourceRange(v, x, rtMin, rtMax)) {
Chris@38: 	return "";
Chris@38:     }
Chris@44:     if (getXYBinSourceRange(v, x, y, magMin, magMax, phaseMin, phaseMax)) {
Chris@38: 	haveValues = true;
Chris@38:     }
Chris@0: 
Chris@35:     QString adjFreqText = "", adjPitchText = "";
Chris@35: 
Chris@38:     if (m_binDisplay == PeakFrequencies) {
Chris@35: 
Chris@44: 	if (!getAdjustedYBinSourceRange(v, x, y, freqMin, freqMax,
Chris@38: 					adjFreqMin, adjFreqMax)) {
Chris@38: 	    return "";
Chris@38: 	}
Chris@35: 
Chris@35: 	if (adjFreqMin != adjFreqMax) {
Chris@35: 	    adjFreqText = tr("Adjusted Frequency:\t%1 - %2 Hz\n")
Chris@35: 		.arg(adjFreqMin).arg(adjFreqMax);
Chris@35: 	} else {
Chris@35: 	    adjFreqText = tr("Adjusted Frequency:\t%1 Hz\n")
Chris@35: 		.arg(adjFreqMin);
Chris@38: 	}
Chris@38: 
Chris@38: 	QString pmin = Pitch::getPitchLabelForFrequency(adjFreqMin);
Chris@38: 	QString pmax = Pitch::getPitchLabelForFrequency(adjFreqMax);
Chris@38: 
Chris@38: 	if (pmin != pmax) {
Chris@38: 	    adjPitchText = tr("Adjusted Pitch:\t%3 - %4\n").arg(pmin).arg(pmax);
Chris@38: 	} else {
Chris@38: 	    adjPitchText = tr("Adjusted Pitch:\t%2\n").arg(pmin);
Chris@35: 	}
Chris@35: 
Chris@35:     } else {
Chris@35: 	
Chris@44: 	if (!getYBinSourceRange(v, y, freqMin, freqMax)) return "";
Chris@35:     }
Chris@35: 
Chris@25:     QString text;
Chris@25: 
Chris@25:     if (rtMin != rtMax) {
Chris@25: 	text += tr("Time:\t%1 - %2\n")
Chris@25: 	    .arg(rtMin.toText(true).c_str())
Chris@25: 	    .arg(rtMax.toText(true).c_str());
Chris@25:     } else {
Chris@25: 	text += tr("Time:\t%1\n")
Chris@25: 	    .arg(rtMin.toText(true).c_str());
Chris@0:     }
Chris@0: 
Chris@25:     if (freqMin != freqMax) {
Chris@35: 	text += tr("Frequency:\t%1 - %2 Hz\n%3Pitch:\t%4 - %5\n%6")
Chris@25: 	    .arg(freqMin)
Chris@25: 	    .arg(freqMax)
Chris@35: 	    .arg(adjFreqText)
Chris@25: 	    .arg(Pitch::getPitchLabelForFrequency(freqMin))
Chris@35: 	    .arg(Pitch::getPitchLabelForFrequency(freqMax))
Chris@35: 	    .arg(adjPitchText);
Chris@25:     } else {
Chris@35: 	text += tr("Frequency:\t%1 Hz\n%2Pitch:\t%3\n%4")
Chris@25: 	    .arg(freqMin)
Chris@35: 	    .arg(adjFreqText)
Chris@35: 	    .arg(Pitch::getPitchLabelForFrequency(freqMin))
Chris@35: 	    .arg(adjPitchText);
Chris@25:     }	
Chris@25: 
Chris@38:     if (haveValues) {
Chris@38: 	float dbMin = AudioLevel::multiplier_to_dB(magMin);
Chris@38: 	float dbMax = AudioLevel::multiplier_to_dB(magMax);
Chris@43: 	QString dbMinString;
Chris@43: 	QString dbMaxString;
Chris@43: 	if (dbMin == AudioLevel::DB_FLOOR) {
Chris@43: 	    dbMinString = tr("-Inf");
Chris@43: 	} else {
Chris@43: 	    dbMinString = QString("%1").arg(lrintf(dbMin));
Chris@43: 	}
Chris@43: 	if (dbMax == AudioLevel::DB_FLOOR) {
Chris@43: 	    dbMaxString = tr("-Inf");
Chris@43: 	} else {
Chris@43: 	    dbMaxString = QString("%1").arg(lrintf(dbMax));
Chris@43: 	}
Chris@25: 	if (lrintf(dbMin) != lrintf(dbMax)) {
Chris@25: 	    text += tr("dB:\t%1 - %2").arg(lrintf(dbMin)).arg(lrintf(dbMax));
Chris@25: 	} else {
Chris@25: 	    text += tr("dB:\t%1").arg(lrintf(dbMin));
Chris@25: 	}
Chris@38: 	if (phaseMin != phaseMax) {
Chris@38: 	    text += tr("\nPhase:\t%1 - %2").arg(phaseMin).arg(phaseMax);
Chris@38: 	} else {
Chris@38: 	    text += tr("\nPhase:\t%1").arg(phaseMin);
Chris@38: 	}
Chris@25:     }
Chris@25: 
Chris@25:     return text;
Chris@0: }
Chris@25: 
Chris@0: int
Chris@40: SpectrogramLayer::getColourScaleWidth(QPainter &paint) const
Chris@40: {
Chris@40:     int cw;
Chris@40: 
Chris@40:     switch (m_colourScale) {
Chris@40:     default:
Chris@40:     case LinearColourScale:
Chris@40: 	cw = paint.fontMetrics().width(QString("0.00"));
Chris@40: 	break;
Chris@40: 
Chris@40:     case MeterColourScale:
Chris@40:     case dBColourScale:
Chris@40: 	cw = std::max(paint.fontMetrics().width(tr("-Inf")),
Chris@40: 		      paint.fontMetrics().width(tr("-90")));
Chris@40: 	break;
Chris@40: 
Chris@40:     case PhaseColourScale:
Chris@40: 	cw = paint.fontMetrics().width(QString("-") + QChar(0x3c0));
Chris@40: 	break;
Chris@40:     }
Chris@40: 
Chris@40:     return cw;
Chris@40: }
Chris@40: 
Chris@40: int
Chris@44: SpectrogramLayer::getVerticalScaleWidth(View *v, QPainter &paint) const
Chris@0: {
Chris@0:     if (!m_model || !m_model->isOK()) return 0;
Chris@0: 
Chris@40:     int cw = getColourScaleWidth(paint);
Chris@40: 
Chris@0:     int tw = paint.fontMetrics().width(QString("%1")
Chris@0: 				     .arg(m_maxFrequency > 0 ?
Chris@0: 					  m_maxFrequency - 1 :
Chris@0: 					  m_model->getSampleRate() / 2));
Chris@0: 
Chris@0:     int fw = paint.fontMetrics().width(QString("43Hz"));
Chris@0:     if (tw < fw) tw = fw;
Chris@40: 
Chris@40:     int tickw = (m_frequencyScale == LogFrequencyScale ? 10 : 4);
Chris@0:     
Chris@40:     return cw + tickw + tw + 13;
Chris@0: }
Chris@0: 
Chris@0: void
Chris@44: SpectrogramLayer::paintVerticalScale(View *v, QPainter &paint, QRect rect) const
Chris@0: {
Chris@0:     if (!m_model || !m_model->isOK()) {
Chris@0: 	return;
Chris@0:     }
Chris@0: 
Chris@0:     int h = rect.height(), w = rect.width();
Chris@0: 
Chris@40:     int tickw = (m_frequencyScale == LogFrequencyScale ? 10 : 4);
Chris@40:     int pkw = (m_frequencyScale == LogFrequencyScale ? 10 : 0);
Chris@40: 
Chris@0:     size_t bins = m_windowSize / 2;
Chris@0:     int sr = m_model->getSampleRate();
Chris@0: 
Chris@0:     if (m_maxFrequency > 0) {
Chris@0: 	bins = int((double(m_maxFrequency) * m_windowSize) / sr + 0.1);
Chris@0: 	if (bins > m_windowSize / 2) bins = m_windowSize / 2;
Chris@0:     }
Chris@0: 
Chris@40:     int cw = getColourScaleWidth(paint);
Chris@40: 
Chris@0:     int py = -1;
Chris@0:     int textHeight = paint.fontMetrics().height();
Chris@0:     int toff = -textHeight + paint.fontMetrics().ascent() + 2;
Chris@0: 
Chris@40:     if (m_cache && !m_cacheInvalid && h > textHeight * 2 + 10) { //!!! lock?
Chris@40: 
Chris@40: 	int ch = h - textHeight * 2 - 8;
Chris@40: 	paint.drawRect(4, textHeight + 4, cw - 1, ch + 1);
Chris@40: 
Chris@40: 	QString top, bottom;
Chris@40: 
Chris@40: 	switch (m_colourScale) {
Chris@40: 	default:
Chris@40: 	case LinearColourScale:
Chris@40: 	    top = (m_normalizeColumns ? "1.0" : "0.02");
Chris@40: 	    bottom = (m_normalizeColumns ? "0.0" : "0.00");
Chris@40: 	    break;
Chris@40: 
Chris@40: 	case MeterColourScale:
Chris@40: 	    top = (m_normalizeColumns ? QString("0") :
Chris@40: 		   QString("%1").arg(int(AudioLevel::multiplier_to_dB(0.02))));
Chris@40: 	    bottom = QString("%1").
Chris@40: 		arg(int(AudioLevel::multiplier_to_dB
Chris@40: 			(AudioLevel::preview_to_multiplier(0, 255))));
Chris@40: 	    break;
Chris@40: 
Chris@40: 	case dBColourScale:
Chris@40: 	    top = "0";
Chris@40: 	    bottom = "-80";
Chris@40: 	    break;
Chris@40: 
Chris@40: 	case PhaseColourScale:
Chris@40: 	    top = QChar(0x3c0);
Chris@40: 	    bottom = "-" + top;
Chris@40: 	    break;
Chris@40: 	}
Chris@40: 
Chris@40: 	paint.drawText((cw + 6 - paint.fontMetrics().width(top)) / 2,
Chris@40: 		       2 + textHeight + toff, top);
Chris@40: 
Chris@40: 	paint.drawText((cw + 6 - paint.fontMetrics().width(bottom)) / 2,
Chris@40: 		       h + toff - 3, bottom);
Chris@40: 
Chris@40: 	paint.save();
Chris@40: 	paint.setBrush(Qt::NoBrush);
Chris@40: 	for (int i = 0; i < ch; ++i) {
Chris@40: 	    int v = (i * 255) / ch + 1;
Chris@40: 	    paint.setPen(m_cache->getColour(v));
Chris@40: 	    paint.drawLine(5, 4 + textHeight + ch - i,
Chris@40: 			   cw + 2, 4 + textHeight + ch - i);
Chris@40: 	}
Chris@40: 	paint.restore();
Chris@40:     }
Chris@40: 
Chris@40:     paint.drawLine(cw + 7, 0, cw + 7, h);
Chris@40: 
Chris@0:     int bin = -1;
Chris@0: 
Chris@44:     for (int y = 0; y < v->height(); ++y) {
Chris@0: 
Chris@0: 	float q0, q1;
Chris@44: 	if (!getYBinRange(v, v->height() - y, q0, q1)) continue;
Chris@0: 
Chris@0: 	int vy;
Chris@0: 
Chris@0: 	if (int(q0) > bin) {
Chris@0: 	    vy = y;
Chris@0: 	    bin = int(q0);
Chris@0: 	} else {
Chris@0: 	    continue;
Chris@0: 	}
Chris@0: 
Chris@40: 	int freq = (sr * bin) / m_windowSize;
Chris@0: 
Chris@0: 	if (py >= 0 && (vy - py) < textHeight - 1) {
Chris@40: 	    if (m_frequencyScale == LinearFrequencyScale) {
Chris@40: 		paint.drawLine(w - tickw, h - vy, w, h - vy);
Chris@40: 	    }
Chris@0: 	    continue;
Chris@0: 	}
Chris@0: 
Chris@0: 	QString text = QString("%1").arg(freq);
Chris@40: 	if (bin == 1) text = QString("%1Hz").arg(freq); // bin 0 is DC
Chris@40: 	paint.drawLine(cw + 7, h - vy, w - pkw - 1, h - vy);
Chris@0: 
Chris@0: 	if (h - vy - textHeight >= -2) {
Chris@40: 	    int tx = w - 3 - paint.fontMetrics().width(text) - std::max(tickw, pkw);
Chris@0: 	    paint.drawText(tx, h - vy + toff, text);
Chris@0: 	}
Chris@0: 
Chris@0: 	py = vy;
Chris@0:     }
Chris@40: 
Chris@40:     if (m_frequencyScale == LogFrequencyScale) {
Chris@40: 
Chris@40: 	paint.drawLine(w - pkw - 1, 0, w - pkw - 1, h);
Chris@40: 
Chris@40: 	int sr = m_model->getSampleRate();//!!! lock?
Chris@40: 	float minf = getEffectiveMinFrequency();
Chris@40: 	float maxf = getEffectiveMaxFrequency();
Chris@40: 
Chris@40: 	int py = h;
Chris@40: 	paint.setBrush(paint.pen().color());
Chris@40: 
Chris@40: 	for (int i = 0; i < 128; ++i) {
Chris@40: 
Chris@40: 	    float f = Pitch::getFrequencyForPitch(i);
Chris@44: 	    int y = lrintf(v->getYForFrequency(f, minf, maxf, true));
Chris@40: 	    int n = (i % 12);
Chris@40: 	    if (n == 1 || n == 3 || n == 6 || n == 8 || n == 10) {
Chris@40: 		// black notes
Chris@40: 		paint.drawLine(w - pkw, y, w, y);
Chris@41: 		int rh = ((py - y) / 4) * 2;
Chris@41: 		if (rh < 2) rh = 2;
Chris@41: 		paint.drawRect(w - pkw, y - (py-y)/4, pkw/2, rh);
Chris@40: 	    } else if (n == 0 || n == 5) {
Chris@40: 		// C, A
Chris@40: 		if (py < h) {
Chris@40: 		    paint.drawLine(w - pkw, (y + py) / 2, w, (y + py) / 2);
Chris@40: 		}
Chris@40: 	    }
Chris@40: 
Chris@40: 	    py = y;
Chris@40: 	}
Chris@40:     }
Chris@0: }
Chris@0: 
Chris@6: QString
Chris@6: SpectrogramLayer::toXmlString(QString indent, QString extraAttributes) const
Chris@6: {
Chris@6:     QString s;
Chris@6:     
Chris@6:     s += QString("channel=\"%1\" "
Chris@6: 		 "windowSize=\"%2\" "
Chris@6: 		 "windowType=\"%3\" "
Chris@6: 		 "windowOverlap=\"%4\" "
Chris@37: 		 "gain=\"%5\" "
Chris@37: 		 "threshold=\"%6\" ")
Chris@6: 	.arg(m_channel)
Chris@6: 	.arg(m_windowSize)
Chris@6: 	.arg(m_windowType)
Chris@6: 	.arg(m_windowOverlap)
Chris@37: 	.arg(m_gain)
Chris@37: 	.arg(m_threshold);
Chris@37: 
Chris@37:     s += QString("minFrequency=\"%1\" "
Chris@37: 		 "maxFrequency=\"%2\" "
Chris@37: 		 "colourScale=\"%3\" "
Chris@37: 		 "colourScheme=\"%4\" "
Chris@37: 		 "colourRotation=\"%5\" "
Chris@37: 		 "frequencyScale=\"%6\" "
Chris@37: 		 "binDisplay=\"%7\" "
Chris@37: 		 "normalizeColumns=\"%8\"")
Chris@37: 	.arg(m_minFrequency)
Chris@6: 	.arg(m_maxFrequency)
Chris@6: 	.arg(m_colourScale)
Chris@6: 	.arg(m_colourScheme)
Chris@37: 	.arg(m_colourRotation)
Chris@35: 	.arg(m_frequencyScale)
Chris@37: 	.arg(m_binDisplay)
Chris@36: 	.arg(m_normalizeColumns ? "true" : "false");
Chris@6: 
Chris@6:     return Layer::toXmlString(indent, extraAttributes + " " + s);
Chris@6: }
Chris@6: 
Chris@11: void
Chris@11: SpectrogramLayer::setProperties(const QXmlAttributes &attributes)
Chris@11: {
Chris@11:     bool ok = false;
Chris@11: 
Chris@11:     int channel = attributes.value("channel").toInt(&ok);
Chris@11:     if (ok) setChannel(channel);
Chris@11: 
Chris@11:     size_t windowSize = attributes.value("windowSize").toUInt(&ok);
Chris@11:     if (ok) setWindowSize(windowSize);
Chris@11: 
Chris@11:     WindowType windowType = (WindowType)
Chris@11: 	attributes.value("windowType").toInt(&ok);
Chris@11:     if (ok) setWindowType(windowType);
Chris@11: 
Chris@11:     size_t windowOverlap = attributes.value("windowOverlap").toUInt(&ok);
Chris@11:     if (ok) setWindowOverlap(windowOverlap);
Chris@11: 
Chris@11:     float gain = attributes.value("gain").toFloat(&ok);
Chris@11:     if (ok) setGain(gain);
Chris@11: 
Chris@37:     float threshold = attributes.value("threshold").toFloat(&ok);
Chris@37:     if (ok) setThreshold(threshold);
Chris@37: 
Chris@37:     size_t minFrequency = attributes.value("minFrequency").toUInt(&ok);
Chris@37:     if (ok) setMinFrequency(minFrequency);
Chris@37: 
Chris@11:     size_t maxFrequency = attributes.value("maxFrequency").toUInt(&ok);
Chris@11:     if (ok) setMaxFrequency(maxFrequency);
Chris@11: 
Chris@11:     ColourScale colourScale = (ColourScale)
Chris@11: 	attributes.value("colourScale").toInt(&ok);
Chris@11:     if (ok) setColourScale(colourScale);
Chris@11: 
Chris@11:     ColourScheme colourScheme = (ColourScheme)
Chris@11: 	attributes.value("colourScheme").toInt(&ok);
Chris@11:     if (ok) setColourScheme(colourScheme);
Chris@11: 
Chris@37:     int colourRotation = attributes.value("colourRotation").toInt(&ok);
Chris@37:     if (ok) setColourRotation(colourRotation);
Chris@37: 
Chris@11:     FrequencyScale frequencyScale = (FrequencyScale)
Chris@11: 	attributes.value("frequencyScale").toInt(&ok);
Chris@11:     if (ok) setFrequencyScale(frequencyScale);
Chris@35: 
Chris@37:     BinDisplay binDisplay = (BinDisplay)
Chris@37: 	attributes.value("binDisplay").toInt(&ok);
Chris@37:     if (ok) setBinDisplay(binDisplay);
Chris@36: 
Chris@36:     bool normalizeColumns =
Chris@36: 	(attributes.value("normalizeColumns").trimmed() == "true");
Chris@36:     setNormalizeColumns(normalizeColumns);
Chris@11: }
Chris@11:     
Chris@11: 
Chris@0: #ifdef INCLUDE_MOCFILES
Chris@0: #include "SpectrogramLayer.moc.cpp"
Chris@0: #endif
Chris@0: