svgui: revision graph

graph

less more | rev 1370: (0) -1000 -240 +240 tip

Initialise level and pan from current state of layer's parameters (e.g. when reloading session)waverevision 2018-11-01, by Chris Cannam
Use a distinguishable text for this statewaverevision 2018-11-01, by Chris Cannam
Merge branch waverevision2018-11-01, by Chris Cannam
Rework waveform renderer to use smooth paths, aiming to get near-pixel-identical results when zoomed out far enough for a single path not to be relevantwaverevision 2018-10-31, by Chris Cannam
Fix the mix/merge channels behaviour in pixels-per-frame zone2018-10-30, by Chris Cannam
Minor tidying2018-10-30, by Chris Cannam
Add show-derivative option but, like inverting the colour scale, I don't think it's as useful as I'd hoped2018-10-30, by Chris Cannam
Fix inconsistency between centre frame actually set and centre frame notified as set, which caused the start frame location to creep out of place gradually as you page through2018-10-30, by Chris Cannam
Add mechanism for saving/loading colour maps by name/id rather than by numerical index, for future compatibility when adding to or changing the supported colour maps. Add two new colour maps (and one old one). Write out backward-compatible numerical indices for use when reloading in older versions. Also add a mechanism to invert the colour map, though I don't think it turns out useful enough to include in the UI.2018-10-18, by Chris Cannam
Merge2018-10-12, by Chris Cannam
Merge from default branchzoom 2018-10-05, by Chris Cannam
Merge2018-10-11, by Chris Cannam
Oops, typeof is not standard2018-10-11, by Chris Cannam
Rework cacheing logic to reduce the number of reallocations and be more correct about the repaint areas. I don't expect the difference to be really noticeable but in theory performance should be a little better...2018-10-11, by Chris Cannam
Fix ugly text positioning/drawing on osx2018-10-11, by Chris Cannam
Remove some debug bits2018-10-10, by Chris Cannam
Use zoom constraints more consistently, including the new RelativelyFine one2018-10-10, by Chris Cannam
Merge from branch zoom2018-10-10, by Chris Cannam
Debug tweakszoom 2018-10-05, by Chris Cannam
Scale positioning2018-10-03, by Chris Cannam
Use newly-introduced cancel icon instead of fileclose. The deceptive name of fileclose had me thinking nobody was using it, so I removed it and the cancel buttons disappeared2018-10-03, by Chris Cannam
Merge from default branchzoom 2018-10-01, by Chris Cannam
Avoid blowing up when faced with min==max in parameter range2018-10-01, by Chris Cannam
Use locale-aware comparators for sorting user-visible strings2018-10-01, by Chris Cannam
Avoid overflow problems when dealing with large numbers of microsecondszoom 2018-09-28, by Chris Cannam
Use more precise text rendering when zoomed in beyond the ms levelzoom 2018-09-28, by Chris Cannam
This is the correct sizezoom 2018-09-28, by Chris Cannam
Fix crash when scrolling beyond end of waveform (+ fix compiler warnings)zoom 2018-09-27, by Chris Cannam
Fix stupidityzoom 2018-09-27, by Chris Cannam
Fixes for TimeRuler spacing and for the boundaries of the WaveformLayer paint areazoom 2018-09-27, by Chris Cannam
Remove WaveformOversampler again from here; it's now in svcorezoom 2018-09-26, by Chris Cannam
Add custom waveform oversampler methodzoom 2018-09-26, by Chris Cannam
Get oversampled rendering almost working, but I think we need to take more care with the oversampling itselfzoom 2018-09-25, by Chris Cannam
Fix accidental always-auto-normalisezoom 2018-09-25, by Chris Cannam
Toward oversampling renderingzoom 2018-09-24, by Chris Cannam
Factor out paintChannelScaleGuideszoom 2018-09-21, by Chris Cannam
Another tidyzoom 2018-09-21, by Chris Cannam
A further refactor with range blockszoom 2018-09-21, by Chris Cannam
Refactor out paintChannelzoom 2018-09-21, by Chris Cannam
Fix typo that created un-reloadable session filezoom 2018-09-21, by Chris Cannam
Ensure getFrameForX returns value on zoom blocksize boundary; take advantage of that (this is essentially reverting to the same behaviour as in the default branch, which we should probably have done all along)zoom 2018-09-21, by Chris Cannam
Responding to a hang due to mismatching zoom and block sizeszoom 2018-09-20, by Chris Cannam
Avoid compiler warningzoom 2018-09-20, by Chris Cannam
Further ZoomLevel fixeszoom 2018-09-20, by Chris Cannam
More ZoomLevel updateszoom 2018-09-20, by Chris Cannam
Gradual ZoomLevel updateszoom 2018-09-19, by Chris Cannam
Merge from default branchzoom 2018-09-17, by Chris Cannam
Merge from branch import-audio-data2018-09-12, by Chris Cannam
Propose to take only value-like columns as audio samples, not all numeric ones - now that it's easy enough for the user to overruleimport-audio-data 2018-09-12, by Chris Cannam
Move out these bits which are now in CSVFormatimport-audio-data 2018-09-07, by Chris Cannam
Sample rangeimport-audio-data 2018-09-06, by Chris Cannam
Refactor; the two use-cases of CSVFormatDialog were turning out to be different enough to justify two separate classesimport-audio-data 2018-09-06, by Chris Cannam
Support audio-format CSV format selection in dialogimport-audio-data 2018-09-06, by Chris Cannam
Merge from default branchimport-audio-data 2018-09-04, by Chris Cannam
Tidy edges of scale area on Mac2018-08-09, by Chris Cannam
Ensure scale appears for layer when drawn in AutoAlign mode without any other layer present to align to2018-07-04, by Chris Cannam
Layers such as time-value layers with ColourDistinguishes property should use the dark background when a bright colour is selected. This is how it was always supposed to work, I think, but I broke it so long ago that this "fix" might itself come across as a surprising breaking change2018-07-04, by Chris Cannam
Fix compiler warning2018-06-28, by Chris Cannam
Handle additional caseimport-audio-data 2018-06-28, by Chris Cannam
Rename guardimport-audio-data 2018-06-28, by Chris Cannam
Fix compiler warningimport-audio-data 2018-06-28, by Chris Cannam
Tool button on Mac (something has gone very wrong with the appearance of the push button in latest builds)2018-06-26, by Chris Cannam
Never scale down2018-06-26, by Chris Cannam
Improve level-pan rendering quality on non-retina OSX2018-06-26, by Chris Cannam
Better rendering for widget cells2018-06-25, by Chris Cannam
Slightly nicer pan handling, avoiding showing spurious >0dB peaks2018-06-25, by Chris Cannam
Experiment with rounded rects2018-06-22, by Chris Cannam
Collect the bits of bookkeeping for mouse wheel events, and use in all widgets2018-06-22, by Chris Cannam
Proper handling for wheel rotation distance2018-06-22, by Chris Cannam
Half-steps for level in level-pan widget2018-06-21, by Chris Cannam
Ctrl-click on level-pan tool button now also resets to default2018-06-21, by Chris Cannam
Merge from branch plugin-path-config2018-06-11, by Chris Cannam
Fix compiler warningplugin-path-config 2018-06-11, by Chris Cannam
Minor improvement to (still nasty) button layout on OSXplugin-path-config 2018-06-08, by Chris Cannam
Use type keys as indices rather than labelsplugin-path-config 2018-06-08, by Chris Cannam
Fix erroneous tooltipplugin-path-config 2018-06-06, by Chris Cannam
Show value of environment variable; populate for last plugin type by default (as that happens to be Vamp)plugin-path-config 2018-06-04, by Chris Cannam
Various logic fixes, and use new setter-class structuresplugin-path-config 2018-05-25, by Chris Cannam
Plugin review dialogplugin-path-config 2018-05-25, by Chris Cannam
Add "Add"plugin-path-config 2018-05-23, by Chris Cannam
More work on plugin path configuration layout &cplugin-path-config 2018-05-23, by Chris Cannam
Toward more than one plugin type in this widgetplugin-path-config 2018-05-21, by Chris Cannam
Grey-out meaningless buttonsplugin-path-config 2018-05-15, by Chris Cannam
Better editing mechanismplugin-path-config 2018-05-15, by Chris Cannam
Up/downplugin-path-config 2018-05-15, by Chris Cannam
Toward allowing the user to see (at least, and maybe change) the plugin pathplugin-path-config 2018-05-11, by Chris Cannam
Hack to ensure vertical scale lines are in the right place in pixel-doubling rendering2018-05-08, by Chris Cannam
Tidy2018-05-08, by Chris Cannam
Merge from branch horizontal-scale2018-05-03, by Chris Cannam
Provide linear horizontal scale in spectrum as well as log; fix bin positioning and colour scale property box updating; ensure proper background colour and visibility of peak lineshorizontal-scale 2018-05-03, by Chris Cannam
Mergehorizontal-scale 2018-05-02, by Chris Cannam
Fix positioning of peak lines on spectrum layer (origin is already accounted for in the bin/frequency to x conversion functions)2018-05-02, by Chris Cannam
Tweaks to horizontal scalehorizontal-scale 2018-05-02, by Chris Cannam
Draw some tickshorizontal-scale 2018-05-01, by Chris Cannam
Branch toward adding horizontal numerical scales to thingshorizontal-scale 2018-05-01, by Chris Cannam
Tidy2018-04-26, by Chris Cannam
Scale scalable icon2018-04-26, by Chris Cannam
Adjust y-coord of text labels to accommodate larger scaled fonts2018-04-24, by Chris Cannam
Delete rows in reverse order for safety2018-04-23, by Chris Cannam
Avoid crash when scrolling with an empty layer open2018-04-23, by Chris Cannam
Make selection extents more visible on hi-dpi2018-04-19, by Chris Cannam
Make the overlays at either end translucent, so they don't completely crop out any underlying text or necessary info (e.g. selection extents)2018-04-19, by Chris Cannam
Formatting changes to align more with SV style conventions2018-04-17, by Lucas Thompson
Accept optional modality in constructor and fix subsequent possible side effect (re-opening dialog when just cancelled)2018-04-17, by Lucas Thompson
Untabify2018-03-01, by Chris Cannam
Convert some cerrs to SVCERRs. Apart from anything else, this makes MSVC2017 happy2018-03-01, by Chris Cannam
This was new in GCC 72017-12-12, by Chris Cannam
Add fallthrough attribute2017-12-07, by Chris Cannam
Fix loading of should-not-auto-invert scalable icons2017-07-18, by Chris Cannam
Merge from branch "scale-ticks"2017-07-10, by Chris Cannam
Make use of ScaleTickIntervals in log scale as wellscale-ticks 2017-05-04, by Chris Cannam
Rework log scale calculation, update to changed interfacescale-ticks 2017-05-04, by Chris Cannam
Make use of ScaleTickIntervals in linear numerical scale (not log yet)scale-ticks 2017-05-04, by Chris Cannam
Remove debug out2017-03-12, by Chris Cannam
Make some corrections to crosshair (measure cursor) positioning and feature descriptions. Needs review.2017-03-07, by Chris Cannam
Fix crash when changing window size in the spectrum layer2017-03-07, by Chris Cannam
Fix failure to respect saved linear-scale setting in layer when the model suggests it would prefer log scale2017-02-28, by Chris Cannam
Restrict colour 3d plot log scale range to 10 orders of magnitude2017-02-28, by Chris Cannam
Fix attribute name -- it's colourScale in the spectrogram, but it's just scale here2017-02-28, by Chris Cannam
Fix a couple of compiler warnings2017-02-28, by Chris Cannam
Emit2017-02-28, by Chris Cannam
Ctrl-click, and middle-button click, on level-pan widget reset to default (not implemented yet for level-pan tool button though)2017-02-28, by Chris Cannam
Explanatory comment2017-02-28, by Chris Cannam
Ensure threshold is equal to minValue; default of 0 is inadequate when minValue < 0 (fixes bug that made all negative values appear black)2017-02-28, by Chris Cannam
Remove unused function2017-02-28, by Chris Cannam
Use Range01 normalisation in Colour 3D Plot. This gives us the same column normalisation behaviour as in 2.5 (better than the Max1 option).2017-02-28, by Chris Cannam
Debug notes, tidying2017-02-23, by Chris Cannam
Merge2017-02-22, by Chris Cannam
Fix various "model deleted with no aboutToDelete notification" warnings (and one associated potential memory leak)2017-02-22, by Chris Cannam
Overrides2017-02-22, by Chris Cannam
Add activity log output to debug log too2017-02-22, by Chris Cannam
Fix #1792 measure tool crosshairs rendered in wrong colour. Also extend crosshairs over the no-man's-land at the left2017-02-21, by Chris Cannam
Some work to make spectrum layers (and slice layers generally) zoomable in the frequency axis. Also fixes a number of view id mixups in SliceLayer which broke offset calculations for the x axis scale.2017-02-07, by Chris Cannam
More tweaks to when to render from the middle2017-01-27, by Chris Cannam
Looks like we can be a bit more relaxed here2017-01-27, by Chris Cannam
Wire up normalise-visible-area mode in colour 3d plot2017-01-27, by Chris Cannam
Untabify2017-01-27, by Chris Cannam
Scale pen, place line ends in centres of bins, default to line mode2017-01-26, by Chris Cannam
Move this function into cpp file2017-01-26, by Chris Cannam
Scale piano keyboard height according to text size2017-01-26, by Chris Cannam
Fix silly definition that prevented spectrum scale from appearing2017-01-26, by Chris Cannam
Scale pens2017-01-26, by Chris Cannam
Add method to scale pen widths for hi-res screens2017-01-26, by Chris Cannam
Guard only2017-01-26, by Chris Cannam
Scale pen used for centre line2017-01-26, by Chris Cannam
Guard only2017-01-26, by Chris Cannam
Minor debug2017-01-26, by Chris Cannam
Switch widget type to one that gets mouseover notifications2017-01-26, by Chris Cannam
Randomise start offset for partial paints, it looks (I think) a little better2017-01-26, by Chris Cannam
Measure time taken to render per pixel, and use the time last time around to decide whether to be time constrained this time around2017-01-26, by Chris Cannam
Fix #1781 Running CQ Chromagram spits out stacks of "bin index out of range" warnings2017-01-26, by Chris Cannam
Fix incorrect call to getColumn() that broke the peak-frequency spectrogram and close zoom levels of the colour 3d plot2017-01-16, by Chris Cannam
Debug toward tracking down strange peak-frequency spectrogram update problem2017-01-13, by Chris Cannam
Make getPreferredPeakCache check the render mode itself2017-01-13, by Chris Cannam
Merge from branch 3.0-integration2017-01-13, by Chris Cannam
Fix memory leak of cache pixmaps in View3.0-integration 2017-01-13, by Chris Cannam
More cache hit counts; make debug output from colour 3d plot renderer (even though it is to SVDEBUG) appear only with explicit debug flag3.0-integration 2017-01-05, by Chris Cannam
Don't start in the middle when repainting the whole width while using a peak cache. It looks funny.3.0-integration 2017-01-05, by Chris Cannam
Make the colour 3d plot renderer able to support more than one level of peak cache; introduce a second "peak" cache for the spectrogram layer that actually has a 1-1 column relationship with the underlying FFT model, and use it in addition to the existing peak cache if memory is plentiful. Makes spectrograms appear much faster in many common situations.3.0-integration 2017-01-05, by Chris Cannam
Recreate FFT model when something changes, not the next time it's requested (avoids extra work when only retrieving the model)3.0-integration 2017-01-05, by Chris Cannam
Wire up record monitoring3.0-integration 2017-01-04, by Chris Cannam
Provisionally add labels for normalisation menu (sigh)3.0-integration 2017-01-03, by Chris Cannam
Add help icon, + update subrepo3.0-integration 2017-01-03, by Chris Cannam
Comment some debug output3.0-integration 2017-01-03, by Chris Cannam
Fix some compiler warnings3.0-integration 2017-01-03, by Chris Cannam
Fix erroneous use of single-colour setting to determine dark/light background when in segmentation mode3.0-integration 2016-12-20, by Chris Cannam
Further PropertyBox layout overhaul: avoid crash (/ assertion failure) when property type changes from e.g. colour to colourmap, by replacing the existing widget within the layout rather than trying to repopulate it3.0-integration 2016-12-20, by Chris Cannam
Merge from branch svg, and thus (in some subrepos) from levelpanwidget3.0-integration 2016-12-19, by Chris Cannam
Implement "Export SVG file..."svg 2016-12-19, by Chris Cannam
Fix incorrect initial display levels in LevelPanWidgetlevelpanwidget 2016-12-16, by Chris Cannam
Support mouse wheel on level-pan tool buttonlevelpanwidget 2016-12-16, by Chris Cannam
Add swatches to colour map combo (optionally, as it turns out they are quite visually distracting)levelpanwidget 2016-12-16, by Chris Cannam
Introduce a colour map combo too. Doesn't yet have swatcheslevelpanwidget 2016-12-16, by Chris Cannam
Take advantage of the fact that a group layout is now always used, to simplify codelevelpanwidget 2016-12-16, by Chris Cannam
Introduce colour combobox class, to replace ad-hoc code in property boxlevelpanwidget 2016-12-16, by Chris Cannam
Adjust spacing in property boxlevelpanwidget 2016-12-15, by Chris Cannam
Record scale factor in loglevelpanwidget 2016-12-15, by Chris Cannam
Some adjustments to make view elements clearer and more correctly sized, especially on hidpi (non-pixel-doubling) systemslevelpanwidget 2016-12-15, by Chris Cannam
Retina thumbwheelslevelpanwidget 2016-12-15, by Chris Cannam
Tool tipslevelpanwidget 2016-12-15, by Chris Cannam
An attempt to improve PropertyBox layout on the Mac. Make all rows consistent by always creating a group layout for each row, regardless of whether the item(s) in it are marked as grouped or not.levelpanwidget 2016-12-15, by Chris Cannam
Make play params area of property box look a bit better on OSXlevelpanwidget 2016-12-15, by Chris Cannam
As NotifyingPushButton, but a ToolButtonlevelpanwidget 2016-12-15, by Chris Cannam
Moving around some UI bitslevelpanwidget 2016-12-15, by Chris Cannam
Merge from branch 3.0-integrationlevelpanwidget 2016-12-14, by Chris Cannam
Minor debug tweaks3.0-integration 2016-12-14, by Chris Cannam
Fix some compiler problems3.0-integration 2016-12-13, by Chris Cannam
Some hackery toward having a zoomlevel typezoom 2016-12-12, by Chris Cannam
Merge from branch bqresample3.0-integration 2016-12-09, by Chris Cannam
Fixes to sample rate and latency handlingbqresample 2016-12-09, by Chris Cannam
Some work on play parameters and level controls in property boxlevelpanwidget 2016-12-06, by Chris Cannam
Switch to level-pan tool button in property boxlevelpanwidget 2016-12-06, by Chris Cannam
Introduce level-pan widget to property boxlevelpanwidget 2016-12-05, by Chris Cannam
Add monitoring to level-pan widget (though not well, yet)levelpanwidget 2016-12-05, by Chris Cannam
Another use of WidgetScalemore-hidpi 2016-12-05, by Chris Cannam
Some icon updatesmore-hidpi 2016-12-05, by Chris Cannam
Scale the sizes of a few more UI elementsmore-hidpi 2016-12-05, by Chris Cannam
Bigger colour swatches for bigger fonts3.0-integration 2016-11-30, by Chris Cannam
Always accept wheel events3.0-integration 2016-11-30, by Chris Cannam
More debug3.0-integration 2016-11-28, by Chris Cannam
Avoid rounding error giving too few bins in column request3.0-integration 2016-11-23, by Chris Cannam
Merge from branch bqfft3.0-integration 2016-11-21, by Chris Cannam
Branch to use bqfft code and remove FFTapibqfft 2016-11-21, by Chris Cannam
Backed out changeset d89e04b0eff3, thus un-backing-out changeset c036560a7205!3.0-integration 2016-11-17, by Chris Cannam
Backed out changeset c036560a72053.0-integration 2016-11-17, by Chris Cannam
Introduce our own scaleDrawBufferImage (though I think we probably won't actually want to use this, so I expect to back it out again)3.0-integration 2016-11-17, by Chris Cannam
More timings and cache hit counts3.0-integration 2016-11-10, by Chris Cannam
Use peak cache at one zoom level lower (since it exists at that level already -- this is a >= vs > question) + make naming more uniform3.0-integration 2016-11-08, by Chris Cannam
Fix omitted topmost bin3.0-integration 2016-11-04, by Chris Cannam
Fix forehead-slapping failure to use the right model when rendering 3d plot in peaks cache mode (i.e. when zoomed quite far out)3.0-integration 2016-11-04, by Chris Cannam
Make SVDEBUG always write to a log file -- formerly this was disabled in NDEBUG builds. I think there's little use to that, it just means that we keep adding more cerr debug output because we aren't getting the log we need. And SVDEBUG logging is not usually used in tight loops, I don't think the performance overhead is too serious.3.0-integration 2016-11-03, by Chris Cannam
Merge from branch piper3.0-integration 2016-10-28, by Chris Cannam
Tidyingproject-file-rework 2016-10-25, by Chris Cannam
Minor build updatesproject-file-rework 2016-10-25, by Chris Cannam
Merge from branch 3.0-integrationproject-file-rework 2016-10-25, by Chris Cannam
Cut down vastly on the number of config.pri files and places where their contents has to be effectively duplicated without themproject-file-rework 2016-10-24, by Chris Cannam
Add out-of-process execution to prefs dialog3.0-integration 2016-10-21, by Chris Cannam
Fix completely bogus allocation that was only shown up because of a compiler warning for int->float conversion possibly restricting value range!3.0-integration 2016-10-20, by Chris Cannam
Merge from branch "msvc2015_64"3.0-integration 2016-10-20, by Chris Cannam
Tidy and re-fix for Linuxmsvc2015_64 2016-10-19, by Chris Cannam
MSVC build fixesmsvc2015_64 2016-10-18, by Chris Cannam
Merge from branch tony-2.0-integration3.0-integration 2016-09-20, by Chris Cannam
Merge latest SV 3.0 branch codetony-2.0-integration 2016-08-19, by Chris Cannam
Introduce labels in RangeMapper and use them in AudioDial, though only for tooltip at present. Make use of this for spectrogram magic -81dB/-Inf threshold. Also introduce static strings for inf/pi and use where appropriate.3.0-integration 2016-08-05, by Chris Cannam
Merge work on unified spectrogram and colour 3d plot caching renderer3.0-integration 2016-08-05, by Chris Cannam
Since 1d317e717fe4 we no longer want to fft scale in hybrid mode. (This might also restore compatibility with Tony and prior SV save sessions -- test this.)spectrogram-minor-refactor 2016-08-05, by Chris Cannam
Make text labels on vertical scale ticks visiblespectrogram-minor-refactor 2016-08-05, by Chris Cannam
Fixes to phase display and colour scale for it; tidy up some debug outputspectrogram-minor-refactor 2016-08-05, by Chris Cannam
Pull out paintDetailedScalespectrogram-minor-refactor 2016-08-05, by Chris Cannam
Minor tidy, + go back to opaque-only spectrogram as intendedspectrogram-minor-refactor 2016-08-05, by Chris Cannam
Restore illuminateLocalFeatures in spectrogramspectrogram-minor-refactor 2016-08-05, by Chris Cannam
Reconnect double-click region select in spectrogramspectrogram-minor-refactor 2016-08-04, by Chris Cannam
Restore phase displayspectrogram-minor-refactor 2016-08-04, by Chris Cannam
Re-implement dB^2 (log-power) spectrogram settingspectrogram-minor-refactor 2016-08-04, by Chris Cannam
Re-enable (little-used) normalise-visible-range option in spectrogram layerspectrogram-minor-refactor 2016-08-03, by Chris Cannam
Use a count of bins rather than min and max bins (because the name maxbin tells us nothing about whether the range is inclusive or not)spectrogram-minor-refactor 2016-08-03, by Chris Cannam
Another small tidyspectrogram-minor-refactor 2016-08-02, by Chris Cannam
Fix vertical zoom/scroll in colour 3d plot layerspectrogram-minor-refactor 2016-08-02, by Chris Cannam
Minor tidyspectrogram-minor-refactor 2016-08-02, by Chris Cannam
Sensible vertical scale and hybrid normalisation range in colour 3d plotspectrogram-minor-refactor 2016-08-02, by Chris Cannam

less more | rev 1370: (0) -1000 -240 +240 tip

Mercurial > hg > svgui

graph