view layer/Colour3DPlotExporter.cpp @ 1619:36634b427d61

Fix wrongly-written test which made the mapping alignments line up wrongly in some cases where adjacent panes were related (but, because of this test, the alignment view thought they were not)

/* -*- c-basic-offset: 4 indent-tabs-mode: nil -*-  vi:set ts=8 sts=4 sw=4: */

/*
    Sonic Visualiser
    An audio file viewer and annotation editor.
    Centre for Digital Music, Queen Mary, University of London.
    
    This program is free software; you can redistribute it and/or
    modify it under the terms of the GNU General Public License as
    published by the Free Software Foundation; either version 2 of the
    License, or (at your option) any later version.  See the file
    COPYING included with this distribution for more information.
*/

#include "Colour3DPlotExporter.h"

#include "data/model/EditableDenseThreeDimensionalModel.h"
#include "data/model/FFTModel.h"

#include "VerticalBinLayer.h"

Colour3DPlotExporter::Colour3DPlotExporter(Sources sources, Parameters params) :
    m_sources(sources),
    m_params(params)
{
    SVCERR << "Colour3DPlotExporter::Colour3DPlotExporter: constructed at "
           << this << endl;
}

Colour3DPlotExporter::~Colour3DPlotExporter()
{
    SVCERR << "Colour3DPlotExporter[" << this << "]::~Colour3DPlotExporter"
           << endl;
}

void
Colour3DPlotExporter::discardSources()
{
    SVCERR << "Colour3DPlotExporter[" << this << "]::discardSources"
           << endl;
    QMutexLocker locker(&m_mutex);
    m_sources.verticalBinLayer = nullptr;
    m_sources.source = {};
    m_sources.fft = {};
    m_sources.provider = nullptr;
}

QVector<QString>
Colour3DPlotExporter::getStringExportHeaders(DataExportOptions opts) const
{
    auto model =
        ModelById::getAs<DenseThreeDimensionalModel>(m_sources.source);
    
    auto layer = m_sources.verticalBinLayer;
    auto provider = m_sources.provider;
    
    if (!model || !layer) {
        SVCERR << "ERROR: Colour3DPlotExporter::getDelimitedDataHeaderLine: Source model and layer required" << endl;
        return {};
    }

    int minbin = 0;
    int sh = model->getHeight();
    int nbins = sh;
    
    if (provider) {

        minbin = layer->getIBinForY(provider, provider->getPaintHeight());
        if (minbin >= sh) minbin = sh - 1;
        if (minbin < 0) minbin = 0;
    
        nbins = layer->getIBinForY(provider, 0) - minbin + 1;
        if (minbin + nbins > sh) nbins = sh - minbin;
    }

    QVector<QString> headers;

    if (opts & DataExportAlwaysIncludeTimestamp) {
        if (opts & DataExportWriteTimeInFrames) {
            headers << "FRAME";
        } else {
            headers << "TIME";
        }
    }
    
    if (m_params.binDisplay == BinDisplay::PeakFrequencies) {
        for (int i = 0; i < nbins/4; ++i) {
            headers << QString("FREQ %1").arg(i+1)
                 << QString("MAG %1").arg(i+1);
        }
    } else {
        bool hasValues = model->hasBinValues();
        QString unit = (hasValues ? model->getBinValueUnit() : "");
        for (int i = minbin; i < minbin + nbins; ++i) {
            QString name = model->getBinName(i);
            if (name == "") {
                if (hasValues) {
                    if (unit != "") {
                        name = QString("BIN %1: %2 %3")
                            .arg(i+1)
                            .arg(model->getBinValue(i))
                            .arg(unit);
                    } else {
                        name = QString("BIN %1: %2")
                            .arg(i+1)
                            .arg(model->getBinValue(i));
                    }
                } else {
                    name = QString("BIN %1")
                        .arg(i+1);
                }
            }
            headers << name;
        }
    }

    return headers;
}

QVector<QVector<QString>>
Colour3DPlotExporter::toStringExportRows(DataExportOptions opts,
                                         sv_frame_t startFrame,
                                         sv_frame_t duration) const
{
    QMutexLocker locker(&m_mutex);

    BinDisplay binDisplay = m_params.binDisplay;

    auto model =
        ModelById::getAs<DenseThreeDimensionalModel>(m_sources.source);
    auto fftModel =
        ModelById::getAs<FFTModel>(m_sources.fft);

    auto layer = m_sources.verticalBinLayer;
    auto provider = m_sources.provider;

    if (!model || !layer) {
        SVCERR << "ERROR: Colour3DPlotExporter::toDelimitedDataString: Source model and layer required" << endl;
        return {};
    }
    if ((binDisplay == BinDisplay::PeakFrequencies) && !fftModel) {
        SVCERR << "ERROR: Colour3DPlotExporter::toDelimitedDataString: FFT model required in peak frequencies mode" << endl;
        return {};
    }

    int minbin = 0;
    int sh = model->getHeight();
    int nbins = sh;
    
    if (provider) {

        minbin = layer->getIBinForY(provider, provider->getPaintHeight());
        if (minbin >= sh) minbin = sh - 1;
        if (minbin < 0) minbin = 0;
    
        nbins = layer->getIBinForY(provider, 0) - minbin + 1;
        if (minbin + nbins > sh) nbins = sh - minbin;
    }

    int w = model->getWidth();

    QVector<QVector<QString>> rows;
    
    for (int i = 0; i < w; ++i) {
        
        sv_frame_t fr = model->getStartFrame() + i * model->getResolution();
        if (fr < startFrame || fr >= startFrame + duration) {
            continue;
        }
        
        //!!! (+ phase layer type)

        auto column = model->getColumn(i);
        column = ColumnOp::Column(column.data() + minbin,
                                  column.data() + minbin + nbins);

        // The scale factor is always applied
        column = ColumnOp::applyGain(column, m_params.scaleFactor);
        
        QVector<QString> row;
 
        if (opts & DataExportAlwaysIncludeTimestamp) {
            if (opts & DataExportWriteTimeInFrames) {
                row << QString("%1").arg(fr);
            } else {
                row << RealTime::frame2RealTime(fr, model->getSampleRate())
                    .toString().c_str();
            }
        }
        
        if (binDisplay == BinDisplay::PeakFrequencies) {
            
            FFTModel::PeakSet peaks = fftModel->getPeakFrequencies
                (FFTModel::AllPeaks, i, minbin, minbin + nbins - 1);

            // We don't apply normalisation or gain to the output, but
            // we *do* perform thresholding when exporting the
            // peak-frequency spectrogram, to give the user an
            // opportunity to cut irrelevant peaks. And to make that
            // match the display, we have to apply both normalisation
            // and gain locally for thresholding

            auto toTest = ColumnOp::normalize(column, m_params.normalization);
            toTest = ColumnOp::applyGain(toTest, m_params.gain);
            
            for (const auto &p: peaks) {

                int bin = p.first;

                if (toTest[bin - minbin] < m_params.threshold) {
                    continue;
                }

                double freq = p.second;
                double value = column[bin - minbin];
                
                row << QString("%1").arg(freq) << QString("%1").arg(value);
            }

        } else {
        
            if (binDisplay == BinDisplay::PeakBins) {
                column = ColumnOp::peakPick(column);
            }
        
            for (auto value: column) {
                row << QString("%1").arg(value);
            }
        }

        if (!row.empty()) {
            rows.push_back(row);
        }
    }

    return rows;
}