| Mon, 05 Dec 2016 16:39:03 +0000 |
Chris Cannam |
Remove resampler quality option (#1760)
3.0-integration
|
| Fri, 02 Dec 2016 09:14:11 +0000 |
Chris Cannam |
Add Apple Lossless files
3.0-integration
|
| Fri, 02 Dec 2016 09:13:52 +0000 |
Chris Cannam |
Further updates to tests and debug output for file reading on OSX
3.0-integration
|
| Thu, 01 Dec 2016 20:49:55 +0000 |
Chris Cannam |
More faffing with tests, to no great effect
3.0-integration
|
| Thu, 01 Dec 2016 17:45:40 +0000 |
Chris Cannam |
Add gapless preference to prefs dialog; much work on audio read tests
3.0-integration
|
| Tue, 29 Nov 2016 17:09:07 +0000 |
Chris Cannam |
Another check to ensure sync error suppressed at eof
3.0-integration
|
| Tue, 29 Nov 2016 16:45:53 +0000 |
Chris Cannam |
Merge from branch mp3-gapless
3.0-integration
|
| Tue, 29 Nov 2016 16:45:29 +0000 |
Chris Cannam |
Stop reporting sync errors only when we really are at eof, i.e. after the input callback has been called again (previously we just tested whether we'd buffered up all the input, which of course we do in one go at the start)
mp3-gapless
|
| Tue, 29 Nov 2016 14:35:27 +0000 |
Chris Cannam |
Test fixes
mp3-gapless
|
| Tue, 29 Nov 2016 14:25:57 +0000 |
Chris Cannam |
Update m4a files to exports from CoreAudio, rather than FAAC; update tests accordingly, and add test for spurious data after end of decode
mp3-gapless
|
| Tue, 29 Nov 2016 13:34:51 +0000 |
Chris Cannam |
Handle trimming the padding from end as well
mp3-gapless
|
| Tue, 29 Nov 2016 12:06:49 +0000 |
Chris Cannam |
Refactor in CodedAudioFileReader in preparation for trimming at end
mp3-gapless
|
| Tue, 29 Nov 2016 11:35:56 +0000 |
Chris Cannam |
Add gapless flag to MP3FileReader, and implement trimming the delay samples from the start (padding is not yet trimmed from end)
mp3-gapless
|
| Tue, 29 Nov 2016 08:58:50 +0000 |
Chris Cannam |
Add test for last change to ColumnOp
3.0-integration
|
| Mon, 28 Nov 2016 18:09:59 +0000 |
Chris Cannam |
Further fix to decision about when not to interpolate in ColumnOp::distribute
3.0-integration
|
| Mon, 28 Nov 2016 14:41:45 +0000 |
Chris Cannam |
Merge
3.0-integration
|
| Mon, 28 Nov 2016 14:40:45 +0000 |
Chris Cannam |
Interpolate always, when interpolation requested. Previous test failed to take into account varying bin height in log-scale modes, which meant interpolation might be necessary even when more bins than pixels.
3.0-integration
|
| Fri, 25 Nov 2016 17:33:44 +0000 |
Chris Cannam |
Make CSV feature writer produce the same output with Qt 5.6 and 5.7+
3.0-integration
|
| Fri, 25 Nov 2016 17:33:12 +0000 |
Chris Cannam |
Don't show this... We should find a better way to make it available in the UI
3.0-integration
|
| Fri, 25 Nov 2016 14:26:24 +0000 |
Chris Cannam |
Avoid being locale-specific in XSD parse
3.0-integration
|
| Fri, 25 Nov 2016 11:37:06 +0000 |
Chris Cannam |
Merge
3.0-integration
|
| Fri, 25 Nov 2016 11:33:34 +0000 |
Chris Cannam |
Improve mp3 offset detection, add test for truncated decode
3.0-integration
|
| Fri, 25 Nov 2016 11:33:02 +0000 |
Chris Cannam |
Don't always print these
3.0-integration
|
| Fri, 25 Nov 2016 10:08:52 +0000 |
Chris Cannam |
Merge from branch subdivide-instants
3.0-integration
|
| Fri, 25 Nov 2016 10:08:09 +0000 |
Chris Cannam |
Tidy up, with some convenient C++11isms
subdivide-instants
|
| Fri, 25 Nov 2016 09:57:36 +0000 |
Chris Cannam |
Add Winnow as well
subdivide-instants
|
| Fri, 25 Nov 2016 09:38:53 +0000 |
Chris Cannam |
Implement "Subdivide Selected Instants". Also add the relabel command to the history, which I previously forgot to do!
subdivide-instants
|
| Thu, 24 Nov 2016 17:06:31 +0000 |
Chris Cannam |
Add MAD_BUFFER_GUARD padding at end of mp3 buffer, in order to ensure last frame is decoded successfully (otherwise the decoded audio is truncated). Another thing learned from madplay.
3.0-integration
|
| Thu, 24 Nov 2016 13:38:45 +0000 |
Chris Cannam |
Do that only for the first frame
3.0-integration
|
| Thu, 24 Nov 2016 13:32:04 +0000 |
Chris Cannam |
Filter out Xing/LAME info frames, rather than letting them go to the mp3 decoder as if they were audio frames. Fixes the 1152-sample zero pad at start of some decoded mp3 files (distinct from decoder delay). The logic here is based on the madplay code.
3.0-integration
|
| Wed, 23 Nov 2016 14:51:03 +0000 |
Chris Cannam |
Tag load diagnostic
3.0-integration
|
| Wed, 23 Nov 2016 14:34:27 +0000 |
Chris Cannam |
A bit more diagnostic info
3.0-integration
|
| Wed, 23 Nov 2016 13:57:36 +0000 |
Chris Cannam |
More diagnostic output
3.0-integration
|
| Wed, 23 Nov 2016 12:05:53 +0000 |
Chris Cannam |
More error reporting updates
3.0-integration
|
| Wed, 23 Nov 2016 10:38:53 +0000 |
Chris Cannam |
Warn when out-of-range bin requested
3.0-integration
|
| Wed, 23 Nov 2016 10:35:10 +0000 |
Chris Cannam |
Avoid potentially trying to allocate negative-sized vector!
3.0-integration
|
| Wed, 23 Nov 2016 10:34:45 +0000 |
Chris Cannam |
Debug note when we overrun end of data
3.0-integration
|
| Wed, 23 Nov 2016 10:34:30 +0000 |
Chris Cannam |
Trivial loop reordering for sequential index
3.0-integration
|
| Tue, 22 Nov 2016 16:40:41 +0000 |
Chris Cannam |
Debug output updates
3.0-integration
|
| Tue, 22 Nov 2016 16:40:28 +0000 |
Chris Cannam |
Avoid compiler warning
3.0-integration
|
| Tue, 22 Nov 2016 16:40:14 +0000 |
Chris Cannam |
Actually use the StorageAdviser output properly
3.0-integration
|
| Tue, 22 Nov 2016 16:39:29 +0000 |
Chris Cannam |
More informative debug output from StorageAdviser
3.0-integration
|
| Tue, 22 Nov 2016 16:39:17 +0000 |
Chris Cannam |
Add SVCERR and the ability to silence debug output (giving Sonic Annotator a --quiet mode)
3.0-integration
|
| Mon, 21 Nov 2016 17:08:02 +0000 |
Chris Cannam |
Hit counts optional
3.0-integration
|
| Mon, 21 Nov 2016 16:54:37 +0000 |
Chris Cannam |
Merge from default branch
3.0-integration
|
| Mon, 21 Nov 2016 16:32:58 +0000 |
Chris Cannam |
Send RDF-indexer warnings to debug rather than cerr
|
| Mon, 21 Nov 2016 15:33:03 +0000 |
Chris Cannam |
Merge from branch bqfft
3.0-integration
|
| Mon, 21 Nov 2016 15:05:57 +0000 |
Chris Cannam |
Branch to use bqfft code and remove FFTapi
bqfft
|
| Fri, 18 Nov 2016 23:30:15 +0000 |
Chris Cannam |
Don't show this log by default
3.0-integration
|
| Fri, 18 Nov 2016 12:53:21 +0000 |
Chris Cannam |
Fix fairly obscure mis-canonicalisation in RealTime (leading to non-canonical but still correct values)
3.0-integration
|
| Thu, 17 Nov 2016 14:46:03 +0000 |
Chris Cannam |
Further column op tests and fixes
3.0-integration
|
| Thu, 17 Nov 2016 14:33:20 +0000 |
Chris Cannam |
Tests and fixes for distribute(). Although this version of interpolated distribution passes these tests, it isn't right visually -- the expected values in the tests are offset. To be continued.
3.0-integration
|
| Thu, 17 Nov 2016 11:56:54 +0000 |
Chris Cannam |
Start tests for ColumnOp (+ some resulting fixes)
3.0-integration
|
| Wed, 16 Nov 2016 16:12:42 +0000 |
Chris Cannam |
Debug output improvements, and make the checker actually attempt to call the descriptor function for known plugin types
3.0-integration
|
| Tue, 15 Nov 2016 16:54:02 +0000 |
Chris Cannam |
Test fixes
3.0-integration
|
| Tue, 15 Nov 2016 16:12:48 +0000 |
Chris Cannam |
RealTime fixes to comply with new, more demanding tests; also run same (failing) tests on Vamp SDK version
3.0-integration
|
| Mon, 14 Nov 2016 17:54:22 +0000 |
Chris Cannam |
Remove some no-longer-used project files
3.0-integration
|
| Mon, 14 Nov 2016 17:53:16 +0000 |
Chris Cannam |
Rearrange svcore tests so they can all be built from the top level
3.0-integration
|
| Mon, 14 Nov 2016 15:00:29 +0000 |
Chris Cannam |
Further RealTime test (currently failing)
3.0-integration
|
| Thu, 10 Nov 2016 09:58:28 +0000 |
Chris Cannam |
More timings and cache hit counts
3.0-integration
|
| Thu, 10 Nov 2016 09:23:05 +0000 |
Chris Cannam |
A note on cache hit findings
3.0-integration
|
| Wed, 09 Nov 2016 18:08:40 +0000 |
Chris Cannam |
Print out cache hit/miss counts
3.0-integration
|
| Sat, 05 Nov 2016 10:41:41 +0000 |
Chris Cannam |
Merge from branch piper
3.0-integration
|
| Sat, 05 Nov 2016 10:40:22 +0000 |
Chris Cannam |
Avoid assigning model resolution of 0 to models coming from plugins that report weirdly high output rates (symptom: data did not show up in edit layer data dialog, as the row/frame conversion failed)
piper
|
| Fri, 04 Nov 2016 16:44:59 +0000 |
Chris Cannam |
Fix omitted topmost bin
3.0-integration
|
| Fri, 04 Nov 2016 16:01:37 +0000 |
Chris Cannam |
Ensure columns all have correct height when retrieved (to avoid e.g. empty columns because a feature extractor's start time was >0)
3.0-integration
|
| Fri, 04 Nov 2016 14:57:03 +0000 |
Chris Cannam |
Merge from branch piper
3.0-integration
|
| Fri, 04 Nov 2016 14:39:15 +0000 |
Chris Cannam |
Some updates to accommodate adaptation for Sonic Annotator
piper
|
| Fri, 04 Nov 2016 14:16:01 +0000 |
Chris Cannam |
Align Sonic Annotator with the new Piper-ified subrepos (bearing in mind we want neither Piper nor the plugin load checker in Sonic Annotator itself)
piper
|
| Thu, 03 Nov 2016 15:38:17 +0000 |
Chris Cannam |
Update to use listargs variant of Piper stuff (so that the plugin winnowing feature from the penultimate commit actually works)
piper
|
| Thu, 03 Nov 2016 14:57:00 +0000 |
Chris Cannam |
Make SVDEBUG always write to a log file -- formerly this was disabled in NDEBUG builds. I think there's little use to that, it just means that we keep adding more cerr debug output because we aren't getting the log we need. And SVDEBUG logging is not usually used in tight loops, I don't think the performance overhead is too serious.
piper
|
| Thu, 03 Nov 2016 14:14:09 +0000 |
Chris Cannam |
Use plugin scan results to inform the list requests issued to Piper servers
piper
|
| Tue, 01 Nov 2016 16:02:15 +0000 |
Chris Cannam |
Logging; use only first ("native") helper for non-Vamp plugins
piper
|
| Tue, 01 Nov 2016 15:09:44 +0000 |
Chris Cannam |
More useful reporting output
piper
|
| Tue, 01 Nov 2016 14:43:51 +0000 |
Chris Cannam |
Add omitted files, again!
piper
|
| Tue, 01 Nov 2016 14:08:57 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
piper
|
| Tue, 01 Nov 2016 14:06:47 +0000 |
Chris Cannam |
Support multiple plugin checker helpers, as for multiple piper servers
3.0-integration
|
| Tue, 01 Nov 2016 12:09:05 +0000 |
Chris Cannam |
Support for multiple servers
3.0-integration
|
| Fri, 28 Oct 2016 15:20:58 +0100 |
Chris Cannam |
Merge from branch piper
3.0-integration
|
| Fri, 28 Oct 2016 15:19:12 +0100 |
Chris Cannam |
Merge from branch project-file-rework
piper
|
| Fri, 28 Oct 2016 11:32:36 +0100 |
Chris Cannam |
Ensure plugin is deleted in same thread that created and used it
project-file-rework
|
| Fri, 28 Oct 2016 11:08:17 +0100 |
Chris Cannam |
Rename server to simple-server, and add some more description in usage
project-file-rework
|
| Thu, 27 Oct 2016 16:13:25 +0100 |
Chris Cannam |
Error handling
project-file-rework
|
| Thu, 27 Oct 2016 14:01:35 +0100 |
Chris Cannam |
Error handling
project-file-rework
|
| Thu, 27 Oct 2016 12:06:14 +0100 |
Chris Cannam |
Update Piper server invocation convention
project-file-rework
|
| Thu, 27 Oct 2016 10:29:44 +0100 |
Chris Cannam |
More Windows build bits
project-file-rework
|
| Tue, 25 Oct 2016 21:06:38 +0100 |
Chris Cannam |
Fix maddening failure to start server with space in its path
project-file-rework
|
| Tue, 25 Oct 2016 11:04:26 +0100 |
Chris Cannam |
Merge
project-file-rework
|
| Tue, 25 Oct 2016 10:53:12 +0100 |
Chris Cannam |
Add files that I forgot to track on Friday (sigh)
piper
|
| Mon, 24 Oct 2016 17:53:33 +0100 |
Chris Cannam |
Cut down vastly on the number of config.pri files and places where their contents has to be effectively duplicated without them
project-file-rework
|
| Fri, 21 Oct 2016 16:24:30 +0100 |
Chris Cannam |
Error reporting for Piper server startup
piper
|
| Fri, 21 Oct 2016 14:51:22 +0100 |
Chris Cannam |
Fixes to choice of plugin factory
piper
|
| Fri, 21 Oct 2016 11:49:27 +0100 |
Chris Cannam |
Restore native-Vamp factory and make the choice between Piper and Native a preference
piper
|
| Thu, 20 Oct 2016 18:31:02 +0100 |
Chris Cannam |
Fix capnp include scenario on Windows
piper
|
| Thu, 20 Oct 2016 14:06:58 +0100 |
Chris Cannam |
Avoid instantiating all plugins (in piper client) on startup, using plugin static data instead. Problem of where to get the units field from is still pending.
piper
|
| Thu, 20 Oct 2016 11:19:34 +0100 |
Chris Cannam |
Merge from branch 3.0-integration
piper
|
| Thu, 20 Oct 2016 11:16:22 +0100 |
Chris Cannam |
Merge from branch msvc2015_64
3.0-integration
|
| Wed, 19 Oct 2016 17:33:32 +0100 |
Chris Cannam |
Further MSVC build stuff. Committing this as-is because it's building and running now, but there's a lot to tidy up.
msvc2015_64
|
| Wed, 19 Oct 2016 09:11:51 +0100 |
Chris Cannam |
Tidy and re-fix for Linux
msvc2015_64
|
| Tue, 18 Oct 2016 15:54:56 +0100 |
Chris Cannam |
MSVC build fixes
msvc2015_64
|
| Tue, 18 Oct 2016 14:04:06 +0100 |
Chris Cannam |
Merge from branch "3.0-integration"
msvc2015_64
|
| Tue, 18 Oct 2016 14:03:55 +0100 |
Chris Cannam |
MSVC build fixes
msvc2015_64
|
| Tue, 18 Oct 2016 14:03:35 +0100 |
Chris Cannam |
MatrixFile is no longer used
3.0-integration
|
| Mon, 17 Oct 2016 16:39:36 +0100 |
Chris Cannam |
Fix compiler warnings
piper
|
| Mon, 17 Oct 2016 14:55:05 +0100 |
Chris Cannam |
Restore plugin categories
piper
|
| Mon, 17 Oct 2016 14:28:43 +0100 |
Chris Cannam |
More cautious locking on sparse model modification
piper
|
| Mon, 17 Oct 2016 14:18:23 +0100 |
Chris Cannam |
Pull out model creation into the transformer thread run(), so that all communications with the plugin server happen on a single thread. Then make the model accessor wait for them to be created (which still happens right at the start of processing) before returning.
piper
|
| Fri, 14 Oct 2016 16:23:04 +0100 |
Chris Cannam |
Try AutoPlugin; also not very successful
piper
|
| Fri, 14 Oct 2016 14:33:43 +0100 |
Chris Cannam |
Bodge in piper-cpp client (not yet working)
piper
|
| Tue, 20 Sep 2016 09:16:13 +0100 |
Chris Cannam |
Merge from default branch
3.0-integration
|
| Tue, 20 Sep 2016 09:16:05 +0100 |
Chris Cannam |
Merge from branch tony-2.0-integration
3.0-integration
|
| Fri, 19 Aug 2016 15:58:57 +0100 |
Chris Cannam |
Merge latest SV 3.0 branch code
tony-2.0-integration
|
| Tue, 16 Aug 2016 16:49:22 +0100 |
Chris Cannam |
Compiler warning fixes
|
| Mon, 15 Aug 2016 16:42:19 +0100 |
Chris Cannam |
Avoid warning
3.0-integration
|
| Fri, 05 Aug 2016 17:48:52 +0100 |
Chris Cannam |
Introduce labels in RangeMapper and use them in AudioDial, though only for tooltip at present. Make use of this for spectrogram magic -81dB/-Inf threshold. Also introduce static strings for inf/pi and use where appropriate.
3.0-integration
|
| Fri, 05 Aug 2016 15:05:02 +0100 |
Chris Cannam |
Merge work on unified spectrogram and colour 3d plot caching renderer
3.0-integration
|
| Fri, 05 Aug 2016 14:31:16 +0100 |
Chris Cannam |
Fixes to phase display and colour scale for it; tidy up some debug output
spectrogram-minor-refactor
|
| Thu, 04 Aug 2016 14:02:56 +0100 |
Chris Cannam |
Restore phase display
spectrogram-minor-refactor
|
| Wed, 03 Aug 2016 16:16:23 +0100 |
Chris Cannam |
Re-enable (little-used) normalise-visible-range option in spectrogram layer
spectrogram-minor-refactor
|
| Wed, 03 Aug 2016 14:19:56 +0100 |
Chris Cannam |
Avoid overrun-by-1
spectrogram-minor-refactor
|
| Mon, 01 Aug 2016 16:25:06 +0100 |
Chris Cannam |
Float/double conversion fixes
spectrogram-minor-refactor
|
| Mon, 01 Aug 2016 16:21:01 +0100 |
Chris Cannam |
Fix threshold in spectrogram -- it wasn't working in the last release.
spectrogram-minor-refactor
|
| Mon, 01 Aug 2016 15:06:16 +0100 |
Chris Cannam |
Scale range matching
spectrogram-minor-refactor
|
| Wed, 20 Jul 2016 13:40:23 +0100 |
Chris Cannam |
Toward updating mag cache
spectrogram-minor-refactor
|
| Thu, 14 Jul 2016 16:12:05 +0100 |
Chris Cannam |
Convert ColumnNormalization to an enum class, and separate out normalize-visible
spectrogram-minor-refactor
|
| Thu, 14 Jul 2016 14:49:04 +0100 |
Chris Cannam |
Fix potential crash in Dense3dModelPeakCache owing to combination of wrong width calculation and wrong handling of width overrun
spectrogram-minor-refactor
|
| Wed, 13 Jul 2016 13:06:28 +0100 |
Chris Cannam |
Create, but don't yet use, a renderer in the colour 3d plot layer
spectrogram-minor-refactor
|
| Thu, 23 Jun 2016 14:43:00 +0100 |
Chris Cannam |
Comments and naming
spectrogram-minor-refactor
|
| Thu, 23 Jun 2016 08:45:52 +0100 |
Chris Cannam |
Small fix to compiler warning
spectrogram-minor-refactor
|
| Mon, 20 Jun 2016 12:00:32 +0100 |
Chris Cannam |
Extend column logic to peak frequency display as well, and correct some scopes according to whether values are per source column or per target pixel
spectrogram-minor-refactor
|
| Mon, 20 Jun 2016 11:30:15 +0100 |
Chris Cannam |
Pull out column ops into ColumnOp
spectrogram-minor-refactor
|
| Mon, 13 Jun 2016 16:17:44 +0100 |
Chris Cannam |
Mid-refactor to pull out the bulk of paintDrawBuffer into chunks
spectrogram-minor-refactor
|
| Wed, 27 Apr 2016 11:04:32 +0100 |
Chris Cannam |
OSX build fixes
3.0-integration
|
| Thu, 21 Apr 2016 15:29:30 +0100 |
Chris Cannam |
Merge from the default branch
3.0-integration
|
| Wed, 20 Apr 2016 12:06:28 +0100 |
Chris Cannam |
Merge branches 3.0-integration and imaf_enc to 3.0-plus-imaf
3.0-plus-imaf
|
| Fri, 15 Apr 2016 16:26:15 +0100 |
Chris Cannam |
Merge from branch pluginscan
3.0-integration
|
| Fri, 15 Apr 2016 16:13:06 +0100 |
Chris Cannam |
Check for plugin scan helper checker helper program in suitable directory, & tidy up warning messages somewhat
pluginscan
|
| Thu, 14 Apr 2016 16:52:55 +0100 |
Chris Cannam |
Update for adjusted checker layout, and tidy
pluginscan
|
| Thu, 14 Apr 2016 14:03:18 +0100 |
Chris Cannam |
Make use of, and warn for, the plugin checker for all types of plugin. Haven't yet resolved the question of how to install and find it.
pluginscan
|
| Thu, 14 Apr 2016 12:12:04 +0100 |
Chris Cannam |
First cut running (but not yet using output of, or recovering from errors in) the plugin checker at startup
pluginscan
|
| Mon, 21 Mar 2016 10:02:21 +0000 |
Chris Cannam |
Add -ldl in a couple more places
|
| Fri, 18 Mar 2016 15:30:28 +0000 |
Chris Cannam |
Win32 build fix
|
| Fri, 18 Mar 2016 14:25:05 +0000 |
Chris Cannam |
Start including Vamp SDK into main build, as we do with Sonic Annotator
3.0-integration
|
| Fri, 18 Mar 2016 13:42:54 +0000 |
Chris Cannam |
Presume that the Vamp SDK exists at the directory next door
|
| Fri, 04 Mar 2016 12:38:20 +0000 |
Chris Cannam |
Merge from default branch
3.0-integration
|
| Fri, 04 Mar 2016 12:29:35 +0000 |
Chris Cannam |
Merge
|
| Fri, 04 Mar 2016 09:50:09 +0000 |
Chris Cannam |
Fix display of 3d model data in data editor, by adding start frame offset (formerly ignored)
|
| Wed, 02 Mar 2016 16:16:36 +0000 |
Chris Cannam |
Merge from default branch
3.0-integration
|
| Thu, 25 Feb 2016 13:02:57 +0000 |
Chris Cannam |
...commented out
|
| Thu, 25 Feb 2016 13:02:46 +0000 |
Chris Cannam |
Debug
|
| Fri, 22 Jan 2016 09:52:08 +0000 |
Chris Cannam |
Debug bits
|
| Tue, 19 Jan 2016 12:32:30 +0000 |
Chris Cannam |
Show warning to the user when plugin population has problems
|
| Mon, 11 Jan 2016 14:18:56 +0000 |
Chris Cannam |
Check for plugin loadability before trying to load in the main process (POSIX only so far)
|
| Fri, 08 Jan 2016 15:39:12 +0000 |
Chris Cannam |
Pull out candidate list
|
| Thu, 25 Feb 2016 10:53:10 +0000 |
Chris Cannam |
Better error reporting for transform load (from RDF and XML)
|
| Wed, 24 Feb 2016 11:35:51 +0000 |
Chris Cannam |
Work around libsndfile-1.0.26 bug that reports all files as non-seekable
|
| Wed, 24 Feb 2016 10:28:47 +0000 |
Chris Cannam |
Use float format for cached files in CodedAudioFileReader, to preserve internal representation (see comment)
|
| Thu, 04 Feb 2016 11:16:05 +0000 |
Chris Cannam |
Merge from the default branch
3.0-integration
|
| Thu, 04 Feb 2016 11:13:39 +0000 |
Chris Cannam |
Merge from branch "tony-2.0-integration"
3.0-integration
|
| Sat, 30 Jan 2016 12:08:50 +0000 |
Chris Cannam |
Merge
|
| Sat, 30 Jan 2016 12:05:14 +0000 |
Chris Cannam |
Update acinclude files to look for qt5-qmake as well as qmake-qt5
|
| Fri, 22 Jan 2016 18:12:06 +0000 |
Chris Cannam |
Small possible speedup
3.0-integration
|
| Fri, 22 Jan 2016 17:08:02 +0000 |
Chris Cannam |
Tidy a bit
3.0-integration
|
| Fri, 22 Jan 2016 13:39:45 +0000 |
Chris Cannam |
Convert 3d model column type from QVector to std::vector; replace another user of ResizeableBitset
3.0-integration
|
| Fri, 22 Jan 2016 12:46:42 +0000 |
Chris Cannam |
Don't need ResizeableBitset, vector<bool> is already a compact format
3.0-integration
|
| Fri, 22 Jan 2016 12:46:19 +0000 |
Chris Cannam |
Fix one-block rounding error when zoomed a long way out, visible as an offset toward the end of very long audio files
3.0-integration
|
| Fri, 22 Jan 2016 09:52:30 +0000 |
Chris Cannam |
Adjust locking when filling range cache in background thread, so as to spend less time waiting on locks
3.0-integration
|
| Fri, 22 Jan 2016 09:52:08 +0000 |
Chris Cannam |
Debug bits
3.0-integration
|
| Tue, 19 Jan 2016 12:32:30 +0000 |
Chris Cannam |
Show warning to the user when plugin population has problems
3.0-integration
|
| Mon, 11 Jan 2016 14:18:56 +0000 |
Chris Cannam |
Check for plugin loadability before trying to load in the main process (POSIX only so far)
3.0-integration
|
| Fri, 08 Jan 2016 15:39:12 +0000 |
Chris Cannam |
Pull out candidate list
3.0-integration
|
| Wed, 18 Nov 2015 12:08:33 +0000 |
Chris Cannam |
Merge from default branch
3.0-integration
|
| Wed, 04 Nov 2015 14:18:22 +0000 |
Chris Cannam |
OSX build stuff
|
| Wed, 04 Nov 2015 12:06:12 +0000 |
Chris Cannam |
Write Track in RDF only if title/artist metadata present, not simply on the basis of a TrackMetadata object existing
|
| Wed, 04 Nov 2015 10:07:29 +0000 |
Chris Cannam |
Update JAMS output to JAMS v0.2.0. We now (for the first time?!) write actual JAMS schema-compliant output when possible, though it isn't possible for many types of plugin. The output for all tested combinations of transforms is valid JSON even where it isn't schema-compliant.
|
| Tue, 03 Nov 2015 14:31:58 +0000 |
Chris Cannam |
Add & test the digits option in the CSV file writer
|
| Tue, 03 Nov 2015 12:41:15 +0000 |
Chris Cannam |
Merge
|
| Tue, 03 Nov 2015 11:34:44 +0000 |
Chris Cannam |
Debug outputs
|
| Tue, 03 Nov 2015 11:34:23 +0000 |
Chris Cannam |
Handle unknown type
|
| Tue, 03 Nov 2015 11:34:07 +0000 |
Chris Cannam |
Make it possible to report that a transform is of unknown type (e.g. invalid transform id, user mixed up filename and transform id, etc)
|
| Thu, 22 Oct 2015 11:53:06 +0100 |
Chris Cannam |
Build fix
|
| Tue, 20 Oct 2015 12:54:06 +0100 |
Chris Cannam |
Return maximum through getNormalizedMagnitudesAt to avoid having to make more than one call
tony-2.0-integration
|
| Wed, 14 Oct 2015 10:19:48 +0100 |
Chris Cannam |
Merge from branch "3.0-integration"
tony-2.0-integration
|
| Wed, 14 Oct 2015 10:12:14 +0100 |
Chris Cannam |
Merge from branch "tony-2.0-integration"
3.0-integration
|
| Tue, 13 Oct 2015 14:26:40 +0100 |
Chris Cannam |
Adjust model update during recording or writing a new wave file. Formerly we were using the model's completion percentage to indicate write proportion and completion -- that's not a good idea because some layers will reasonably avoid rendering at all until a model reaches 100% completion (it's supposed to report only progress on the initial model generation, and the model shouldn't change during completion updates).
tony-2.0-integration
|
| Mon, 12 Oct 2015 15:06:15 +0100 |
Chris Cannam |
Fix lock contention in FFTapi
3.0-integration
|
| Mon, 12 Oct 2015 15:06:15 +0100 |
Chris Cannam |
Fix lock contention in FFTapi
tony-2.0-integration
|
| Mon, 12 Oct 2015 13:38:24 +0100 |
Chris Cannam |
Merge from the default branch
tony-2.0-integration
|
| Tue, 01 Sep 2015 17:05:32 +0100 |
Chris Cannam |
Add mandatory option --json-format to JSON feature writer, in preparation for supporting multiple JSON formats (perhaps) in future
|
| Tue, 01 Sep 2015 15:51:07 +0100 |
Chris Cannam |
Simple MIDI writer test
|
| Thu, 20 Aug 2015 15:33:13 +0100 |
Chris Cannam |
Back out Matthias's e22bfe8ca248 in the hope that my (earlier but on a different branch, and now merged) fix 882d448c8a6d will do the right thing
tony-2.0-integration
|
| Thu, 20 Aug 2015 14:54:21 +0100 |
Chris Cannam |
Merge through to branch for Tony 2.0
tony-2.0-integration
|
| Thu, 20 Aug 2015 13:33:46 +0100 |
Chris Cannam |
Merge from default branch
3.0-integration
|
| Thu, 20 Aug 2015 13:15:19 +0100 |
Chris Cannam |
Merge from branch recording
3.0-integration
|
| Thu, 20 Aug 2015 12:22:17 +0100 |
Chris Cannam |
Fix reloading session with recorded audio
recording
|
| Wed, 19 Aug 2015 17:03:31 +0100 |
Chris Cannam |
Make WritableWaveFileModel a true WaveFileModel (and ReadOnlyWaveFileModel the other sort of it). Enable recording from an empty session using that.
recording
|
| Wed, 19 Aug 2015 16:36:21 +0100 |
Chris Cannam |
Remove unused dependency on Rubber Band
|
| Wed, 19 Aug 2015 16:32:46 +0100 |
Chris Cannam |
svcore should not depend on rubberband
|
| Fri, 14 Aug 2015 18:16:14 +0100 |
Matthias Mauch |
fixes the problem that the last note was not exported to csv
tonioni
|
| Tue, 04 Aug 2015 16:39:40 +0100 |
Chris Cannam |
Merge from branch bqaudioio
3.0-integration
|
| Tue, 04 Aug 2015 13:27:42 +0100 |
Chris Cannam |
Initial work toward switching to bqaudioio library (so as to get I/O, not just O)
bqaudioio
|
| Tue, 04 Aug 2015 10:49:24 +0100 |
Chris Cannam |
Necessary include
3.0-integration
|
| Tue, 14 Jul 2015 15:04:46 +0100 |
alo |
removed imaf sliders
imaf_enc
|
| Tue, 07 Jul 2015 17:39:06 +0100 |
Chris Cannam |
Merge from default branch
3.0-integration
|
| Fri, 03 Jul 2015 16:09:14 +0100 |
Chris Cannam |
Fix assignment of values to regions on import, in case where region model contains duplicate points
|
| Wed, 01 Jul 2015 18:31:28 +0100 |
Chris Cannam |
Merge from branch simple-fft-model
3.0-integration
|
| Wed, 07 Jan 2015 17:42:21 +0000 |
Chris Cannam |
Merge from default branch
simple-fft-model
|
| Wed, 01 Jul 2015 15:53:54 +0100 |
Chris Cannam |
Fix a number of warnings in the 32-bit build
|
| Wed, 01 Jul 2015 13:27:03 +0100 |
Chris Cannam |
Merge from branch simple-fft-model
3.0-integration
|
| Tue, 30 Jun 2015 10:26:23 +0100 |
Chris Cannam |
Merge
simple-fft-model
|
| Tue, 30 Jun 2015 10:25:32 +0100 |
Chris Cannam |
Build fix
simple-fft-model
|
| Fri, 26 Jun 2015 14:08:05 +0100 |
Chris Cannam |
Merge from branch normalize_hybrid_option
3.0-integration
|
| Fri, 26 Jun 2015 14:07:25 +0100 |
Chris Cannam |
Merge from branch simple-fft-model
3.0-integration
|
| Tue, 16 Jun 2015 20:32:44 +0100 |
Chris Cannam |
Two-channel test
simple-fft-model
|
| Tue, 16 Jun 2015 20:28:23 +0100 |
Chris Cannam |
Fix a cache-related dumbitude
simple-fft-model
|
| Mon, 15 Jun 2015 19:32:30 +0100 |
Chris Cannam |
Raise this maximum, so longer files can be shown in the overview pane
simple-fft-model
|
| Mon, 15 Jun 2015 19:01:44 +0100 |
Chris Cannam |
Use in-memory cache for WAV files as well, if appropriate
simple-fft-model
|
| Mon, 15 Jun 2015 16:02:58 +0100 |
Chris Cannam |
Smooth signal flow through from file to fft model
simple-fft-model
|
| Mon, 15 Jun 2015 15:35:57 +0100 |
Chris Cannam |
More tests
simple-fft-model
|
| Mon, 15 Jun 2015 14:35:37 +0100 |
Chris Cannam |
Store temporary audio files in memory if we have plenty of it
simple-fft-model
|
| Mon, 15 Jun 2015 12:38:50 +0100 |
Chris Cannam |
Tidy
simple-fft-model
|
| Mon, 15 Jun 2015 12:19:47 +0100 |
Chris Cannam |
Rework audio file reader API to prefer using std containers
simple-fft-model
|
| Sat, 13 Jun 2015 08:47:05 +0100 |
Chris Cannam |
Fix to fft cache
simple-fft-model
|
| Fri, 12 Jun 2015 19:18:56 +0100 |
Chris Cannam |
A small cache for source samples
simple-fft-model
|
| Fri, 12 Jun 2015 18:50:52 +0100 |
Chris Cannam |
Make a small cache of recently-used columns
simple-fft-model
|
| Fri, 12 Jun 2015 18:20:09 +0100 |
Chris Cannam |
Normalization function
simple-fft-model
|
| Fri, 12 Jun 2015 18:08:57 +0100 |
Chris Cannam |
Simplest naive FFTModel implementation (+ fill in tests)
simple-fft-model
|
| Fri, 12 Jun 2015 14:51:46 +0100 |
Chris Cannam |
Gut the old code, but don't replace it yet (so nothing will link yet)
simple-fft-model
|
| Fri, 12 Jun 2015 13:46:44 +0100 |
Chris Cannam |
More tests
simple-fft-model
|
| Fri, 12 Jun 2015 12:41:19 +0100 |
Chris Cannam |
Start making the FFT model tests into proper tests
|
| Thu, 11 Jun 2015 09:09:11 +0100 |
Chris Cannam |
Tidy
|
| Wed, 10 Jun 2015 17:06:02 +0100 |
Chris Cannam |
Tidy dense time-value model API a bit; add first simple unit test for FFT model
|
| Wed, 10 Jun 2015 14:44:09 +0100 |
Chris Cannam |
Remove some obsolete unused files
|
| Wed, 10 Jun 2015 13:31:21 +0100 |
Chris Cannam |
Fix overflow in width calculation
|
| Wed, 10 Jun 2015 13:14:32 +0100 |
Chris Cannam |
Merge
|
| Wed, 10 Jun 2015 13:12:39 +0100 |
Chris Cannam |
Merge
|
| Wed, 10 Jun 2015 13:12:29 +0100 |
Chris Cannam |
Do not attempt to switch from read-only to read-write mode if an error is pending (may cause mutex deadlock)
|
| Wed, 10 Jun 2015 13:12:06 +0100 |
Chris Cannam |
Tighten up error handling
|
| Wed, 10 Jun 2015 13:11:45 +0100 |
Chris Cannam |
Emit a signal if transform fails
|
| Wed, 10 Jun 2015 13:10:26 +0100 |
Chris Cannam |
Fail upfront if the file is going to be too large. We expect the caller to split up large data sets into several MatrixFiles
|
| Wed, 10 Jun 2015 13:09:14 +0100 |
Chris Cannam |
Comment
|
| Wed, 10 Jun 2015 13:08:30 +0100 |
Chris Cannam |
Avoid compiler warning
|
| Fri, 05 Jun 2015 10:00:26 +0100 |
Chris Cannam |
More optional debug out
|
| Thu, 21 May 2015 16:38:52 +0100 |
Chris Cannam |
Merge
|
| Thu, 21 May 2015 16:38:07 +0100 |
Chris Cannam |
minor debug thing
|
| Fri, 15 May 2015 09:15:57 +0100 |
Chris Cannam |
Fix #1222 CSV export of time-instants layer omits last point
|
| Thu, 14 May 2015 14:04:41 +0100 |
Chris Cannam |
Handle case where plugin erroneously returns sample rate 0 for fixed-rate output
|
| Tue, 12 May 2015 16:19:45 +0100 |
Chris Cannam |
Fixes to, and tests for, RealTime-to-text methods
|
| Mon, 20 Apr 2015 09:11:34 +0100 |
Chris Cannam |
Merge from branch tonioni
|
| Mon, 13 Apr 2015 13:52:05 +0100 |
Chris Cannam |
Revert to -Werror in debug only
tonioni
|
| Tue, 31 Mar 2015 13:06:29 +0100 |
Chris Cannam |
Remove some debug; set some gain values
tonioni
|
| Tue, 31 Mar 2015 12:27:56 +0100 |
Chris Cannam |
Permit extending nominal end of sparse model
tonioni
|
| Tue, 31 Mar 2015 12:12:31 +0100 |
Chris Cannam |
clone() is never used (therefore presumably never works either)
tonioni
|
| Tue, 31 Mar 2015 11:54:57 +0100 |
Chris Cannam |
Implement FillGaps option in SparseModel export
tonioni
|
| Tue, 31 Mar 2015 11:05:02 +0100 |
Chris Cannam |
Wire options into CSVFileWriter; omit levels from Tony note export
tonioni
|
| Tue, 31 Mar 2015 10:39:54 +0100 |
Chris Cannam |
Merge
tonioni
|
| Tue, 31 Mar 2015 10:36:52 +0100 |
Chris Cannam |
Thread-local debug was causing crash on exit with Qt 5.4.x. But we introduced that because QDebug itself was crashing when used from multiple threads. Replace with simpler fstream version
tonioni
|
| Mon, 30 Mar 2015 17:27:25 +0100 |
Chris Cannam |
Add data export options (not all implemented yet)
tonioni
|
| Mon, 30 Mar 2015 16:58:01 +0100 |
Chris Cannam |
M_PI
tonioni
|
| Wed, 25 Mar 2015 10:54:51 +0000 |
Chris Cannam |
Fix to opening debug file
tonioni
|
| Mon, 23 Mar 2015 11:26:28 +0000 |
Chris Cannam |
Merge from cxx11 branch
tonioni
|
| Mon, 23 Mar 2015 10:04:48 +0000 |
Chris Cannam |
Merge from default branch
tonioni
|
| Wed, 11 Mar 2015 13:30:37 +0000 |
Chris Cannam |
Build fixes for OS/X
cxx11
|
| Wed, 11 Mar 2015 12:20:06 +0000 |
Chris Cannam |
c++11 flag in qmake project
cxx11
|
| Wed, 11 Mar 2015 11:52:05 +0000 |
Chris Cannam |
Minor simplification; could use more
cxx11
|
| Wed, 11 Mar 2015 11:03:22 +0000 |
Chris Cannam |
Fix buffer overwrite in normalised case
cxx11
|
| Wed, 11 Mar 2015 09:29:44 +0000 |
Chris Cannam |
Comments etc
cxx11
|
| Tue, 10 Mar 2015 20:03:08 +0000 |
Chris Cannam |
Merge
cxx11
|
| Tue, 10 Mar 2015 20:02:02 +0000 |
Chris Cannam |
Doh
cxx11
|
| Tue, 10 Mar 2015 17:23:45 +0000 |
Chris Cannam |
More type fixes. We now build with -Wconversion, on this platform (64-bit Linux) at least.
cxx11
|
| Tue, 10 Mar 2015 17:02:52 +0000 |
Chris Cannam |
Further dedicated-types fixes
cxx11
|
| Tue, 10 Mar 2015 13:22:10 +0000 |
Chris Cannam |
More type fixes
cxx11
|
| Tue, 10 Mar 2015 10:31:27 +0000 |
Chris Cannam |
More type fixes, primarily in the spectrogram
cxx11
|
| Mon, 09 Mar 2015 12:02:10 +0000 |
Chris Cannam |
Move to using double rather than float for floating-point calculations (float only for storage); more build fixes
cxx11
|
| Wed, 04 Mar 2015 19:08:21 +0000 |
Chris Cannam |
More type-size adjustments
cxx11
|
| Wed, 04 Mar 2015 13:52:48 +0000 |
Chris Cannam |
More build fixes
cxx11
|
| Wed, 04 Mar 2015 12:30:41 +0000 |
Chris Cannam |
Replace the get*Frames calls in AudioFileReader with less stupid API
cxx11
|
| Wed, 04 Mar 2015 12:01:04 +0000 |
Chris Cannam |
Introduce and use a samplerate type
cxx11
|
| Tue, 03 Mar 2015 17:09:19 +0000 |
Chris Cannam |
This code now compiles. Main problem: sample rate types
cxx11
|
| Tue, 03 Mar 2015 15:18:24 +0000 |
Chris Cannam |
Introducing the signed 64-bit frame index type, and fixing build failures from inclusion of -Wconversion with -Werror. Not finished yet.
cxx11
|
| Tue, 03 Mar 2015 09:33:59 +0000 |
Chris Cannam |
Merge from default branch
cxx11
|
| Mon, 02 Mar 2015 17:21:34 +0000 |
Chris Cannam |
Merge
|
| Mon, 02 Mar 2015 17:17:59 +0000 |
Chris Cannam |
Require (and provide) text codec for output stream -- fixing #1153 (wrong codec used when writing RDF)
|
| Thu, 26 Feb 2015 09:44:08 +0000 |
Chris Cannam |
Update and merge
|
| Thu, 26 Feb 2015 09:43:12 +0000 |
Chris Cannam |
Debug reporting from FileSource
|
| Tue, 24 Feb 2015 17:42:00 +0000 |
Chris Cannam |
Enable ThreadSanitizer
datarace
|
| Wed, 18 Feb 2015 12:08:17 +0000 |
Chris Cannam |
Add option to toggle H:M:S time display (when off, just show seconds even when more than 60)
|
| Fri, 13 Feb 2015 13:30:28 +0000 |
Chris Cannam |
Use filename as object name when reading data file to model (so it shows in the resulting layer name)
|
| Fri, 13 Feb 2015 13:29:44 +0000 |
Chris Cannam |
Compile fix
|
| Wed, 14 Jan 2015 14:58:38 +0000 |
Chris Cannam |
RealTime frame-conversion test
|
| Mon, 09 Feb 2015 10:31:07 +0000 |
Chris Cannam |
Merge from default branch
cxx11
|
| Mon, 09 Feb 2015 10:27:21 +0000 |
Chris Cannam |
Pending
coreaudio-metadata
|
| Mon, 08 Dec 2014 15:37:12 +0000 |
Chris Cannam |
Use double instead of float for frequencies in Pitch, just for confidence
|
| Tue, 02 Dec 2014 17:53:17 +0000 |
Chris Cannam |
Wire up note/octave stuff
|
| Tue, 02 Dec 2014 13:50:49 +0000 |
Chris Cannam |
Start adding piano note
|
| Mon, 01 Dec 2014 15:42:58 +0000 |
Chris Cannam |
Unit tests for StringBits::splitQuoted
|
| Mon, 01 Dec 2014 10:18:55 +0000 |
Chris Cannam |
If the first column of a CSV file has zero or one non-empty values in it, during the first 5 rows, then ignore it by default
|
| Thu, 27 Nov 2014 17:51:21 +0000 |
Chris Cannam |
Merge
|
| Thu, 27 Nov 2014 17:50:34 +0000 |
Chris Cannam |
Fix close-quote immediately before separator in StringBits::splitQuoted
|
| Thu, 20 Nov 2014 16:18:31 +0000 |
Chris Cannam |
Avoid crash when setting alignment to 0
|
| Thu, 20 Nov 2014 15:47:05 +0000 |
Chris Cannam |
Merge
|
| Thu, 20 Nov 2014 15:46:19 +0000 |
Chris Cannam |
Make alignment using an external program asynchronous
|
| Thu, 20 Nov 2014 12:30:16 +0000 |
Chris Cannam |
Couple more RealTime tests
|
| Wed, 19 Nov 2014 15:28:51 +0000 |
Chris Cannam |
Another RealTime test
|
| Mon, 17 Nov 2014 17:10:29 +0000 |
Chris Cannam |
Merge
|
| Mon, 17 Nov 2014 17:09:32 +0000 |
Chris Cannam |
Start RealTime tests
|
| Mon, 17 Nov 2014 15:31:07 +0000 |
Chris Cannam |
CXX11 (-std=c++11) branch, to test build environments before making any code adaptations
cxx11
|
| Fri, 14 Nov 2014 17:23:38 +0000 |
Chris Cannam |
Provide access to local filename
|
| Fri, 14 Nov 2014 17:23:27 +0000 |
Chris Cannam |
Provide reader from QIODevice
|
| Fri, 14 Nov 2014 13:51:33 +0000 |
Chris Cannam |
When using an aggregate model to pass data to a transform, zero-pad the shorter input to the duration of the longer rather than truncating the longer. (This is better behaviour for e.g. MATCH, and in any case the code was previously truncating incorrectly and ending up with garbage data at the end.)
|
| Mon, 10 Nov 2014 09:19:49 +0000 |
Chris Cannam |
Merge from default branch
tonioni
|
| Wed, 15 Oct 2014 17:02:48 +0100 |
Chris Cannam |
TransformId is not sufficient -- it could be ambiguous (same transform id, different parameters etc). Use the whole transform
|
| Wed, 15 Oct 2014 16:05:15 +0100 |
Chris Cannam |
Add setNofM logic which the JSON writer can use to write a list when sending multiple files' worth to a single target
|
| Wed, 15 Oct 2014 13:30:14 +0100 |
Chris Cannam |
Write window type too
|
| Wed, 15 Oct 2014 13:06:27 +0100 |
Chris Cannam |
Add plugin_version to transform RDF serialisation (if non-empty)
|
| Wed, 15 Oct 2014 10:38:17 +0100 |
Chris Cannam |
Add omit-filename option to CSV writer (and test it while testing lab writer)
|
| Wed, 15 Oct 2014 10:18:13 +0100 |
Chris Cannam |
Add fill-ends option to CSV writer (and test it)
|
| Tue, 14 Oct 2014 17:30:37 +0100 |
Chris Cannam |
Implement end-times option for CSV writer (not yet tested)
|
| Tue, 14 Oct 2014 10:07:02 +0100 |
Chris Cannam |
Add MIDI destinations tests and fix feature writer bugs resulting from them
|
| Mon, 13 Oct 2014 14:44:51 +0100 |
Chris Cannam |
Add descriptions for writers; add housekeeping options to Sonic Annotator to list writers and formats
|
| Mon, 13 Oct 2014 10:56:16 +0100 |
Chris Cannam |
Separate out stdout ability (not all writers that support one-file will necessarily want to support it, e.g. for binary formats)
|
| Mon, 13 Oct 2014 10:55:43 +0100 |
Chris Cannam |
Add MIDI channel to note data and MIDI writer
|
| Mon, 13 Oct 2014 10:00:54 +0100 |
Chris Cannam |
Write sample rate from output descriptor, for FixedSampleRate outputs
|
| Fri, 10 Oct 2014 15:24:28 +0100 |
Chris Cannam |
Support plugin version in RDF transforms, and bail out in Sonic Annotator if it doesn't match
|
| Wed, 08 Oct 2014 13:14:17 +0100 |
Chris Cannam |
Disconnect signals before abandoning reply object, avoiding "reply unknown" error
|
| Fri, 03 Oct 2014 15:28:31 +0100 |
Chris Cannam |
Merge
|
| Fri, 03 Oct 2014 15:27:02 +0100 |
Chris Cannam |
Handle variable columns by importing all of them (not just the minimum number)
|
| Fri, 03 Oct 2014 15:09:27 +0100 |
Chris Cannam |
Add milliseconds as CSV import timing option
|
| Fri, 03 Oct 2014 09:29:11 +0100 |
Chris Cannam |
Comment only
|
| Wed, 01 Oct 2014 14:06:28 +0100 |
Chris Cannam |
Fix reading duration from transform XML (it was setting the start time instead!)
|
| Wed, 01 Oct 2014 09:20:24 +0100 |
Chris Cannam |
Scary warning if transform RDF fails to use XSD duration format
|
| Mon, 29 Sep 2014 13:27:13 +0100 |
Chris Cannam |
Correct some really stupid fixed-length string stuff, including a genuine stack overflow that causes a crash on OS/X for certain colour 3d plot data.
|
| Tue, 16 Sep 2014 10:29:19 +0100 |
Chris Cannam |
Fix #1058 clicking row in Layer Edit dialog when colour 3d plot layer active jumps to wrong frame (was using sample rate where resolution intended)
|
| Fri, 12 Sep 2014 11:38:55 +0100 |
Chris Cannam |
Experimentally add the hybrid normalisation as an option (not working well either in UI or implementation)
normalize_hybrid_option
|
| Wed, 10 Sep 2014 09:40:45 +0100 |
Chris Cannam |
If the old and new-style user resource prefixes return different results, move across resources from old to new to prime the new path first time we look it up
|
| Tue, 09 Sep 2014 20:37:07 +0100 |
Chris Cannam |
Use QStandardPaths::writableLocation(DataLocation) instead of synthesising path ourselves (hopefully fixing encoding difficulties on Windows)
|
| Tue, 09 Sep 2014 16:52:24 +0100 |
Chris Cannam |
Respond tidily to user cancellation during download, instead of going on to attempt to load the nonexistent file as a non-audio format
|
| Tue, 09 Sep 2014 16:36:21 +0100 |
Chris Cannam |
Merge from default branch
tonioni
|
| Wed, 03 Sep 2014 13:10:19 +0100 |
Chris Cannam |
Fix potential null pointer deref
|
| Wed, 03 Sep 2014 13:08:32 +0100 |
Chris Cannam |
Fix memory leak (from coverity scan)
|
| Wed, 03 Sep 2014 13:06:13 +0100 |
Chris Cannam |
Fix some uninitialised values (from coverity scan)
|
| Wed, 03 Sep 2014 11:27:23 +0100 |
Chris Cannam |
Fix some (probably benign) uninitialised members (from coverity scan)
|
| Wed, 03 Sep 2014 11:26:21 +0100 |
Chris Cannam |
Fix some potential null derefs (from coverity scan)
|
| Wed, 03 Sep 2014 11:22:46 +0100 |
Chris Cannam |
Fix memory leak
|
| Wed, 03 Sep 2014 11:20:18 +0100 |
Chris Cannam |
Fix various slightly dodgy derefs and the like (from coverity scan)
|
| Wed, 03 Sep 2014 11:10:22 +0100 |
Chris Cannam |
Fix some (probably benign) uninitialised members (from coverity scan)
|
| Wed, 03 Sep 2014 11:09:26 +0100 |
Chris Cannam |
Fix some (probably benign) uninitialised members (from coverity scan)
|
| Wed, 03 Sep 2014 11:07:12 +0100 |
Chris Cannam |
Remove redundant code (from coverity scan)
|
| Wed, 03 Sep 2014 11:06:19 +0100 |
Chris Cannam |
Fix very minor but erroneous non-float-arithmetic
|
| Wed, 03 Sep 2014 11:04:41 +0100 |
Chris Cannam |
clarify
|
| Wed, 03 Sep 2014 11:01:50 +0100 |
Chris Cannam |
Fix some (probably benign) uninitialised members (from coverity scan)
|
| Wed, 03 Sep 2014 11:00:19 +0100 |
Chris Cannam |
Fix some (probably benign) uninitialised members (from coverity scan)
|
| Wed, 03 Sep 2014 10:56:59 +0100 |
Chris Cannam |
Backed out changeset 6b5e1edd95fc. I had misunderstood, the container is a vector, not a map, so the fix doesn't work and the original code (although definitely flawed) actually does
|
| Wed, 03 Sep 2014 10:49:38 +0100 |
Chris Cannam |
Fix to iterator invalidation (from coverity scan)
|
| Wed, 03 Sep 2014 10:40:37 +0100 |
Chris Cannam |
As coverity points out, MIDI_END_OF_EXCLUSIVE (0xF7) cannot result from masking with MIDI_MESSAGE_TYPE_MASK(0xF0). Not that it really matters here.
|
| Wed, 03 Sep 2014 09:58:31 +0100 |
Chris Cannam |
Fix return of empty string as bool value (from coverity scan, interesting the compiler doesn't mind)
|
| Wed, 03 Sep 2014 09:57:30 +0100 |
Chris Cannam |
Frame this condition more defensively (from coverity scan)
|
| Wed, 03 Sep 2014 09:56:18 +0100 |
Chris Cannam |
Fix fallthrough in switch (from coverity scan)
|
| Wed, 03 Sep 2014 09:48:51 +0100 |
Chris Cannam |
Fix something coverity reports as "copy-paste error" (actually it doesn't matter, but the fix reads better)
|
| Wed, 03 Sep 2014 09:47:52 +0100 |
Chris Cannam |
Fix some (probably benign) uninitialised members (from coverity scan)
|
| Wed, 03 Sep 2014 09:46:28 +0100 |
Chris Cannam |
Fix accidental declaration of section as bool rather than int (definitely a bug but what did it cause? see #1051, we need units here) (from coverity scan)
|
| Wed, 03 Sep 2014 09:46:01 +0100 |
Chris Cannam |
comment only
|
| Wed, 03 Sep 2014 09:39:23 +0100 |
Chris Cannam |
Fix some (probably benign) uninitialised members (from coverity scan)
|
| Tue, 02 Sep 2014 16:23:48 +0100 |
Chris Cannam |
Update subrepos and merge from default branch
tonioni
|
| Wed, 13 Aug 2014 09:50:42 +0100 |
Chris Cannam |
Avoid compiler warnings when building without lrdf
|
| Mon, 11 Aug 2014 11:30:18 +0100 |
Chris Cannam |
Make sparse time-value layers inaudible by default (user must un-mute them) for compatibility with earlier versions
|
| Fri, 25 Jul 2014 17:02:44 +0100 |
Chris Cannam |
Debug output stuff
|
| Fri, 25 Jul 2014 15:21:41 +0100 |
Chris Cannam |
Per-thread debug (avoiding some dubious threading problems)
|
| Fri, 18 Jul 2014 11:07:30 +0100 |
Chris Cannam |
Merge from default branch
tonioni
|
| Thu, 17 Jul 2014 16:22:54 +0100 |
Chris Cannam |
Small fixes: avoid static etc
|
| Thu, 17 Jul 2014 14:50:31 +0100 |
Chris Cannam |
Fix some errant signals (the modelChanged with args are now modelChangedWithin)
|
| Fri, 04 Jul 2014 11:08:05 +0100 |
Chris Cannam |
We do have liblo
|
| Fri, 04 Jul 2014 11:03:33 +0100 |
Chris Cannam |
OS/X build/deploy fixes
|
| Wed, 02 Jul 2014 22:04:10 +0100 |
Chris Cannam |
Merge from tonioni branch
|
| Wed, 02 Jul 2014 17:31:21 +0100 |
Chris Cannam |
Merge from default branch
tonioni
|
| Wed, 02 Jul 2014 08:42:33 +0100 |
Chris Cannam |
Merge
|
| Wed, 02 Jul 2014 08:42:11 +0100 |
Chris Cannam |
Tidy
|
| Wed, 18 Jun 2014 18:30:19 +0100 |
Chris Cannam |
Merge from branch tonioni (the two are currently in sync)
|
| Tue, 01 Jul 2014 15:31:25 +0100 |
Chris Cannam |
Avoid trying to return out-of-range bin name
|
| Tue, 01 Jul 2014 11:39:09 +0100 |
Chris Cannam |
endl to qDebug does not seem to be threadsafe
|
| Mon, 30 Jun 2014 15:02:43 +0100 |
Chris Cannam |
Avoid crashing when trying to examine data at column < 0 in 3d model
|
| Wed, 18 Jun 2014 13:51:16 +0100 |
Chris Cannam |
Merge from branch warnfix_no_size_t
|
| Wed, 18 Jun 2014 13:42:01 +0100 |
Chris Cannam |
Merge from branch warnfix_no_size_t
tonioni
|
| Wed, 18 Jun 2014 09:13:25 +0100 |
Chris Cannam |
Configure stuff and fixes for -Werror
warnfix_no_size_t
|
| Wed, 18 Jun 2014 08:34:46 +0100 |
Chris Cannam |
Merge from branch tony_integration
warnfix_no_size_t
|
| Tue, 17 Jun 2014 16:42:51 +0100 |
Chris Cannam |
Various size_t etc removals, and compiler warning fixes
warnfix_no_size_t
|
| Tue, 17 Jun 2014 15:24:55 +0100 |
Chris Cannam |
Disambiguate signals
warnfix_no_size_t
|
| Tue, 17 Jun 2014 14:49:49 +0100 |
Chris Cannam |
More size_t evisceration and warning fixes
warnfix_no_size_t
|
| Tue, 17 Jun 2014 14:33:42 +0100 |
Chris Cannam |
Unsigned removals and warning fixes in data/
warnfix_no_size_t
|
| Tue, 17 Jun 2014 13:52:07 +0100 |
Chris Cannam |
Remove size_t's, fix compiler warnings
warnfix_no_size_t
|
| Tue, 17 Jun 2014 12:54:51 +0100 |
Chris Cannam |
Merge from branch "tonioni"
tony_integration
|
| Tue, 17 Jun 2014 12:52:27 +0100 |
Chris Cannam |
Merge from default branch
tony_integration
|
| Mon, 16 Jun 2014 11:28:45 +0100 |
Chris Cannam |
Add comment about meaning of start and end frame of selection
tonioni
|
| Mon, 16 Jun 2014 09:28:12 +0100 |
Chris Cannam |
Cancel async layer creation in Tony when selection is changed during it
tonioni
|
| Fri, 13 Jun 2014 17:39:01 +0100 |
Chris Cannam |
Add an experimental cancel button to view progress bars
tonioni
|
| Fri, 13 Jun 2014 16:35:15 +0100 |
Chris Cannam |
Remove some debug out
tonioni
|
| Fri, 13 Jun 2014 16:12:00 +0100 |
Chris Cannam |
Add normalise preference and take it into account in WaveFileModel
tonioni
|
| Fri, 13 Jun 2014 16:03:48 +0100 |
Chris Cannam |
Add normalised option to CodedAudioFileReader
tonioni
|
| Fri, 13 Jun 2014 12:56:31 +0100 |
Chris Cannam |
For Tony, resample all audio to 44100 on load
tonioni
|
| Tue, 03 Jun 2014 11:14:17 +0100 |
Chris Cannam |
Merge from default branch
tonioni
|
| Tue, 03 Jun 2014 11:05:49 +0100 |
Chris Cannam |
restore brace style
|
| Tue, 03 Jun 2014 10:45:39 +0100 |
Chris Cannam |
Merge from branch tonioni
|
| Thu, 29 May 2014 16:27:52 +0100 |
Chris Cannam |
Merge from default branch
tonioni
|
| Thu, 22 May 2014 17:49:58 +0100 |
matthiasm |
implemented move by one note (replacing big jumps left/right)
tonioni
|
| Mon, 19 May 2014 10:54:45 +0100 |
Chris Cannam |
Fixes to FileSource from Ted Felix (for Rosegarden): avoid blowing up through calling abort() from cleanup() when error occurred; set status correctly for FTP transfers
|
| Wed, 14 May 2014 09:58:07 +0100 |
Chris Cannam |
Merge from default branch
tonioni
|
| Wed, 14 May 2014 09:54:20 +0100 |
Chris Cannam |
Merge from branch tony_integration
|
| Tue, 13 May 2014 09:50:59 +0100 |
Chris Cannam |
Avoid potential crash when network connection fails
tony_integration
|
| Wed, 07 May 2014 16:51:04 +0100 |
Chris Cannam |
Restore selection of playback sample for note layers. Also default to new elecpiano clip.
tony_integration
|
| Wed, 07 May 2014 15:18:45 +0100 |
Chris Cannam |
Merge from default branch
tony_integration
|
| Wed, 07 May 2014 15:17:58 +0100 |
Chris Cannam |
Merge from 900:dcfc40fc896e
|
| Wed, 07 May 2014 15:17:51 +0100 |
Chris Cannam |
Merge from 899:bc0ff66102a8
|
| Wed, 07 May 2014 15:17:43 +0100 |
Chris Cannam |
Merge from 898:5821b64c6b26
|
| Wed, 07 May 2014 15:14:17 +0100 |
Chris Cannam |
Merge
tony_integration
|
| Wed, 07 May 2014 15:11:56 +0100 |
Chris Cannam |
Merge from tonioni branch
tony_integration
|
| Sat, 26 Apr 2014 23:05:32 +0100 |
Chris Cannam |
More subrepos
|
| Sat, 26 Apr 2014 22:22:19 +0100 |
Chris Cannam |
Add some more subrepos
tonioni
|
| Sun, 27 Apr 2014 12:22:28 +0100 |
Chris Cannam |
Remove pch file
|
| Sat, 26 Apr 2014 22:22:18 +0100 |
Chris Cannam |
Add some more subrepos
|
| Sat, 26 Apr 2014 22:22:17 +0100 |
Chris Cannam |
Add some more subrepos
|
| Mon, 07 Apr 2014 10:47:15 +0100 |
Chris Cannam |
Make it possible to import CSV files directly into Note layers
|
| Wed, 02 Apr 2014 21:50:04 +0100 |
Chris Cannam |
A lot of work on saving and reloading sessions: save flexinote layer type and hybrid spectrogram normalisation, etc
tonioni
|
| Wed, 02 Apr 2014 08:51:12 +0100 |
Chris Cannam |
Merge from branch tonioni
tony_integration
|
| Mon, 31 Mar 2014 13:00:17 +0100 |
Chris Cannam |
Merge from default branch
tony_integration
|
| Tue, 01 Apr 2014 13:27:32 +0100 |
Chris Cannam |
Comment out some debug
tonioni
|
| Thu, 27 Mar 2014 13:32:56 +0000 |
Chris Cannam |
Make octave numbering configurable, and change default to C4 = middle C
|
| Tue, 11 Mar 2014 17:32:31 +0000 |
Chris Cannam |
Merge from default branch
tony_integration
|
| Tue, 11 Mar 2014 17:30:35 +0000 |
Chris Cannam |
Merge from branch tonioni
tony_integration
|
| Tue, 11 Mar 2014 17:29:44 +0000 |
Chris Cannam |
Use fixed-rate feature no directly as column number, rather than do a calculation that might introduce rounding error
|
| Wed, 05 Mar 2014 18:10:27 +0000 |
Chris Cannam |
No config -> default to release mode
tonioni
|
| Thu, 06 Feb 2014 18:30:11 +0000 |
Chris Cannam |
Prototype these in superclass
|
| Thu, 06 Feb 2014 18:26:18 +0000 |
Chris Cannam |
Add bin-values and bin-value unit to EditableDense3DModel
|
| Thu, 06 Feb 2014 15:31:16 +0000 |
Chris Cannam |
Add unclamped range mapper methods
|
| Thu, 06 Feb 2014 10:14:59 +0000 |
Chris Cannam |
RangeMapperTest -> TestRangeMapper
|
| Thu, 06 Feb 2014 10:14:19 +0000 |
Chris Cannam |
RangeMapperTest -> TestRangeMapper
|
| Tue, 04 Feb 2014 13:54:32 +0000 |
Chris Cannam |
Avoid compiler warning
tonioni
|
| Fri, 31 Jan 2014 17:25:24 +0000 |
Chris Cannam |
Comments
|
| Fri, 31 Jan 2014 17:09:02 +0000 |
Chris Cannam |
Implement and test the interpolating and auto range mappers
|
| Fri, 31 Jan 2014 13:39:37 +0000 |
Chris Cannam |
Unit-test RangeMapper, fix a couple of bugs
|
| Wed, 29 Jan 2014 17:32:08 +0000 |
Chris Cannam |
Add a callback for no models as well (so we know something has completed and can e.g. delete the handler)
tonioni
|
| Wed, 29 Jan 2014 15:58:15 +0000 |
Chris Cannam |
Callback handler for additional models at end of processing
tonioni
|
| Wed, 29 Jan 2014 09:31:22 +0000 |
Chris Cannam |
For outputs with unknown bin count or multiple bins with variable sample rate, create additional output models for bins beyond the first
tonioni
|
| Tue, 28 Jan 2014 18:52:22 +0000 |
Chris Cannam |
Use a sparse time-value model only for outputs with fixed bin count of 1, not for those with unknown bin count.
tonioni
|
| Tue, 28 Jan 2014 15:01:54 +0000 |
Chris Cannam |
Merge from tonioni branch
tony_integration
|
| Tue, 14 Jan 2014 16:22:49 +0000 |
matthiasm |
added a new elecpiano.wav sound and made it default for the FlexiNoteLayer
tonioni
|
| Fri, 10 Jan 2014 15:21:01 +0000 |
Chris Cannam |
Add methods to return new Clipboard points with particular characteristics (this is an immutable object)
tonioni
|
| Thu, 09 Jan 2014 21:43:33 +0000 |
Chris Cannam |
Debug out operator for real time
tonioni
|
| Thu, 09 Jan 2014 21:30:33 +0000 |
Chris Cannam |
The Mac also has CoreAudio for file loading
tonioni
|
| Thu, 09 Jan 2014 09:18:05 +0000 |
Chris Cannam |
Use sv-dependency-builds on OS/X as well if no config.pri
tonioni
|
| Wed, 08 Jan 2014 13:07:42 +0000 |
Chris Cannam |
Sparse time-value models are now theoretically playable (sometimes)
tonioni
|
| Wed, 08 Jan 2014 09:59:08 +0000 |
Chris Cannam |
Play these with a pitch now (since we support any frequency)
tonioni
|
| Tue, 07 Jan 2014 15:52:34 +0000 |
Chris Cannam |
sampleId -> clipId
tonioni
|
| Tue, 07 Jan 2014 15:49:39 +0000 |
Chris Cannam |
SV file compatibility etc for sample stuff
tonioni
|
| Tue, 07 Jan 2014 13:09:53 +0000 |
Chris Cannam |
sample id instead of plugin data
tonioni
|
| Tue, 07 Jan 2014 10:57:28 +0000 |
Chris Cannam |
Toward using a sample mixer (with arbitrary frequency target) instead of dssi player plugin
tonioni
|
| Wed, 11 Dec 2013 21:40:27 +0000 |
Chris Cannam |
Fix handling of negative frame times in returned features from plugin -- we don't handle them, so don't insert them into the model (instead of blowing up)
|
| Wed, 11 Dec 2013 21:39:54 +0000 |
Chris Cannam |
Clarify
|
| Wed, 11 Dec 2013 17:36:07 +0000 |
Chris Cannam |
Remove obsolete files
|
| Wed, 04 Dec 2013 19:30:02 +0000 |
Chris Cannam |
Use a settings setting for flexi/non-flexi determination -- this may not be the right thing in the long run but it's simpler and easier than passing through a random value that doesn't actually come from anywhere
tonioni
|
| Wed, 04 Dec 2013 19:29:19 +0000 |
Chris Cannam |
Add non-SV-preferred options
tonioni
|
| Wed, 04 Dec 2013 18:30:49 +0000 |
Chris Cannam |
Merge from default branch
tonioni
|
| Wed, 04 Dec 2013 18:29:53 +0000 |
Chris Cannam |
Merge from branch "tonioni_multi_transform"
tonioni
|
| Wed, 04 Dec 2013 18:29:15 +0000 |
Chris Cannam |
Merge from tonioni branch
tonioni_multi_transform
|
| Wed, 04 Dec 2013 16:47:53 +0000 |
Chris Cannam |
Fix warning
|
| Mon, 02 Dec 2013 17:11:56 +0000 |
Chris Cannam |
Merge
tonioni
|
| Mon, 02 Dec 2013 17:11:20 +0000 |
Chris Cannam |
Add NoteExportable base class, use it in MIDI export (and also elsewhere in playback)
tonioni_multi_transform
|
| Mon, 02 Dec 2013 15:47:06 +0000 |
Chris Cannam |
Merge branch tonioni_multi_transform
tonioni
|
| Mon, 02 Dec 2013 12:29:09 +0000 |
Chris Cannam |
Update the rest of the transforms stuff, so now it builds and runs again
tonioni_multi_transform
|
| Mon, 02 Dec 2013 11:17:24 +0000 |
Chris Cannam |
More on multi-transform stuff
tonioni_multi_transform
|
| Fri, 29 Nov 2013 15:43:50 +0000 |
Chris Cannam |
Toward running multiple transforms (from same plugin + params) at once
tonioni_multi_transform
|
| Tue, 26 Nov 2013 14:37:01 +0000 |
Chris Cannam |
Merge from default branch
tonioni
|
| Tue, 26 Nov 2013 14:32:30 +0000 |
Chris Cannam |
Avoid infinite loop in operator<< !
|
| Tue, 26 Nov 2013 13:48:13 +0000 |
Chris Cannam |
Likewise, but for toLocal8Bit().data()
|
| Tue, 26 Nov 2013 13:43:31 +0000 |
Chris Cannam |
Drop toStdString, with debug header we can stream QStrings
|
| Tue, 26 Nov 2013 13:35:08 +0000 |
Chris Cannam |
Drop std:: from cout, cerr, endl -- pull these in through Debug.h
|
| Tue, 26 Nov 2013 11:16:37 +0000 |
Chris Cannam |
WS -> OS
|
| Fri, 22 Nov 2013 10:37:28 +0000 |
Chris Cannam |
Merge from default branch
tonioni
|
| Mon, 04 Nov 2013 15:47:46 +0000 |
Chris Cannam |
Fix error in break condition for csv file analysis -- was making csv file type guessing very slow for large files
|
| Wed, 09 Oct 2013 14:51:46 +0100 |
Chris Cannam |
Add writeSelection
|
| Wed, 09 Oct 2013 14:47:19 +0100 |
Chris Cannam |
Add toDelimitedDataString alternative with frame extents
|
