log

age author description
Mon, 28 Nov 2016 14:41:45 +0000 Chris Cannam Merge 3.0-integration
Mon, 28 Nov 2016 14:40:45 +0000 Chris Cannam Interpolate always, when interpolation requested. Previous test failed to take into account varying bin height in log-scale modes, which meant interpolation might be necessary even when more bins than pixels. 3.0-integration
Fri, 25 Nov 2016 17:33:44 +0000 Chris Cannam Make CSV feature writer produce the same output with Qt 5.6 and 5.7+ 3.0-integration
Fri, 25 Nov 2016 17:33:12 +0000 Chris Cannam Don't show this... We should find a better way to make it available in the UI 3.0-integration
Fri, 25 Nov 2016 14:26:24 +0000 Chris Cannam Avoid being locale-specific in XSD parse 3.0-integration
Fri, 25 Nov 2016 11:37:06 +0000 Chris Cannam Merge 3.0-integration
Fri, 25 Nov 2016 11:33:34 +0000 Chris Cannam Improve mp3 offset detection, add test for truncated decode 3.0-integration
Fri, 25 Nov 2016 11:33:02 +0000 Chris Cannam Don't always print these 3.0-integration
Fri, 25 Nov 2016 10:08:52 +0000 Chris Cannam Merge from branch subdivide-instants 3.0-integration
Fri, 25 Nov 2016 10:08:09 +0000 Chris Cannam Tidy up, with some convenient C++11isms subdivide-instants
Fri, 25 Nov 2016 09:57:36 +0000 Chris Cannam Add Winnow as well subdivide-instants
Fri, 25 Nov 2016 09:38:53 +0000 Chris Cannam Implement "Subdivide Selected Instants". Also add the relabel command to the history, which I previously forgot to do! subdivide-instants
Thu, 24 Nov 2016 17:06:31 +0000 Chris Cannam Add MAD_BUFFER_GUARD padding at end of mp3 buffer, in order to ensure last frame is decoded successfully (otherwise the decoded audio is truncated). Another thing learned from madplay. 3.0-integration
Thu, 24 Nov 2016 13:38:45 +0000 Chris Cannam Do that only for the first frame 3.0-integration
Thu, 24 Nov 2016 13:32:04 +0000 Chris Cannam Filter out Xing/LAME info frames, rather than letting them go to the mp3 decoder as if they were audio frames. Fixes the 1152-sample zero pad at start of some decoded mp3 files (distinct from decoder delay). The logic here is based on the madplay code. 3.0-integration
Wed, 23 Nov 2016 14:51:03 +0000 Chris Cannam Tag load diagnostic 3.0-integration
Wed, 23 Nov 2016 14:34:27 +0000 Chris Cannam A bit more diagnostic info 3.0-integration
Wed, 23 Nov 2016 13:57:36 +0000 Chris Cannam More diagnostic output 3.0-integration
Wed, 23 Nov 2016 12:05:53 +0000 Chris Cannam More error reporting updates 3.0-integration
Wed, 23 Nov 2016 10:38:53 +0000 Chris Cannam Warn when out-of-range bin requested 3.0-integration
Wed, 23 Nov 2016 10:35:10 +0000 Chris Cannam Avoid potentially trying to allocate negative-sized vector! 3.0-integration
Wed, 23 Nov 2016 10:34:45 +0000 Chris Cannam Debug note when we overrun end of data 3.0-integration
Wed, 23 Nov 2016 10:34:30 +0000 Chris Cannam Trivial loop reordering for sequential index 3.0-integration
Tue, 22 Nov 2016 16:40:41 +0000 Chris Cannam Debug output updates 3.0-integration
Tue, 22 Nov 2016 16:40:28 +0000 Chris Cannam Avoid compiler warning 3.0-integration
Tue, 22 Nov 2016 16:40:14 +0000 Chris Cannam Actually use the StorageAdviser output properly 3.0-integration
Tue, 22 Nov 2016 16:39:29 +0000 Chris Cannam More informative debug output from StorageAdviser 3.0-integration
Tue, 22 Nov 2016 16:39:17 +0000 Chris Cannam Add SVCERR and the ability to silence debug output (giving Sonic Annotator a --quiet mode) 3.0-integration
Mon, 21 Nov 2016 17:08:02 +0000 Chris Cannam Hit counts optional 3.0-integration
Mon, 21 Nov 2016 16:54:37 +0000 Chris Cannam Merge from default branch 3.0-integration
Mon, 21 Nov 2016 16:32:58 +0000 Chris Cannam Send RDF-indexer warnings to debug rather than cerr
Mon, 21 Nov 2016 15:33:03 +0000 Chris Cannam Merge from branch bqfft 3.0-integration
Mon, 21 Nov 2016 15:05:57 +0000 Chris Cannam Branch to use bqfft code and remove FFTapi bqfft
Fri, 18 Nov 2016 23:30:15 +0000 Chris Cannam Don't show this log by default 3.0-integration
Fri, 18 Nov 2016 12:53:21 +0000 Chris Cannam Fix fairly obscure mis-canonicalisation in RealTime (leading to non-canonical but still correct values) 3.0-integration
Thu, 17 Nov 2016 14:46:03 +0000 Chris Cannam Further column op tests and fixes 3.0-integration
Thu, 17 Nov 2016 14:33:20 +0000 Chris Cannam Tests and fixes for distribute(). Although this version of interpolated distribution passes these tests, it isn't right visually -- the expected values in the tests are offset. To be continued. 3.0-integration
Thu, 17 Nov 2016 11:56:54 +0000 Chris Cannam Start tests for ColumnOp (+ some resulting fixes) 3.0-integration
Wed, 16 Nov 2016 16:12:42 +0000 Chris Cannam Debug output improvements, and make the checker actually attempt to call the descriptor function for known plugin types 3.0-integration
Tue, 15 Nov 2016 16:54:02 +0000 Chris Cannam Test fixes 3.0-integration
Tue, 15 Nov 2016 16:12:48 +0000 Chris Cannam RealTime fixes to comply with new, more demanding tests; also run same (failing) tests on Vamp SDK version 3.0-integration
Mon, 14 Nov 2016 17:54:22 +0000 Chris Cannam Remove some no-longer-used project files 3.0-integration
Mon, 14 Nov 2016 17:53:16 +0000 Chris Cannam Rearrange svcore tests so they can all be built from the top level 3.0-integration
Mon, 14 Nov 2016 15:00:29 +0000 Chris Cannam Further RealTime test (currently failing) 3.0-integration
Thu, 10 Nov 2016 09:58:28 +0000 Chris Cannam More timings and cache hit counts 3.0-integration
Thu, 10 Nov 2016 09:23:05 +0000 Chris Cannam A note on cache hit findings 3.0-integration
Wed, 09 Nov 2016 18:08:40 +0000 Chris Cannam Print out cache hit/miss counts 3.0-integration
Sat, 05 Nov 2016 10:41:41 +0000 Chris Cannam Merge from branch piper 3.0-integration
Sat, 05 Nov 2016 10:40:22 +0000 Chris Cannam Avoid assigning model resolution of 0 to models coming from plugins that report weirdly high output rates (symptom: data did not show up in edit layer data dialog, as the row/frame conversion failed) piper
Fri, 04 Nov 2016 16:44:59 +0000 Chris Cannam Fix omitted topmost bin 3.0-integration
Fri, 04 Nov 2016 16:01:37 +0000 Chris Cannam Ensure columns all have correct height when retrieved (to avoid e.g. empty columns because a feature extractor's start time was >0) 3.0-integration
Fri, 04 Nov 2016 14:57:03 +0000 Chris Cannam Merge from branch piper 3.0-integration
Fri, 04 Nov 2016 14:39:15 +0000 Chris Cannam Some updates to accommodate adaptation for Sonic Annotator piper
Fri, 04 Nov 2016 14:16:01 +0000 Chris Cannam Align Sonic Annotator with the new Piper-ified subrepos (bearing in mind we want neither Piper nor the plugin load checker in Sonic Annotator itself) piper
Thu, 03 Nov 2016 15:38:17 +0000 Chris Cannam Update to use listargs variant of Piper stuff (so that the plugin winnowing feature from the penultimate commit actually works) piper
Thu, 03 Nov 2016 14:57:00 +0000 Chris Cannam Make SVDEBUG always write to a log file -- formerly this was disabled in NDEBUG builds. I think there's little use to that, it just means that we keep adding more cerr debug output because we aren't getting the log we need. And SVDEBUG logging is not usually used in tight loops, I don't think the performance overhead is too serious. piper
Thu, 03 Nov 2016 14:14:09 +0000 Chris Cannam Use plugin scan results to inform the list requests issued to Piper servers piper
Tue, 01 Nov 2016 16:02:15 +0000 Chris Cannam Logging; use only first ("native") helper for non-Vamp plugins piper
Tue, 01 Nov 2016 15:09:44 +0000 Chris Cannam More useful reporting output piper
Tue, 01 Nov 2016 14:43:51 +0000 Chris Cannam Add omitted files, again! piper
Tue, 01 Nov 2016 14:08:57 +0000 Chris Cannam Merge from branch 3.0-integration piper
Tue, 01 Nov 2016 14:06:47 +0000 Chris Cannam Support multiple plugin checker helpers, as for multiple piper servers 3.0-integration
Tue, 01 Nov 2016 12:09:05 +0000 Chris Cannam Support for multiple servers 3.0-integration
Fri, 28 Oct 2016 15:20:58 +0100 Chris Cannam Merge from branch piper 3.0-integration
Fri, 28 Oct 2016 15:19:12 +0100 Chris Cannam Merge from branch project-file-rework piper
Fri, 28 Oct 2016 11:32:36 +0100 Chris Cannam Ensure plugin is deleted in same thread that created and used it project-file-rework
Fri, 28 Oct 2016 11:08:17 +0100 Chris Cannam Rename server to simple-server, and add some more description in usage project-file-rework
Thu, 27 Oct 2016 16:13:25 +0100 Chris Cannam Error handling project-file-rework
Thu, 27 Oct 2016 14:01:35 +0100 Chris Cannam Error handling project-file-rework
Thu, 27 Oct 2016 12:06:14 +0100 Chris Cannam Update Piper server invocation convention project-file-rework
Thu, 27 Oct 2016 10:29:44 +0100 Chris Cannam More Windows build bits project-file-rework
Tue, 25 Oct 2016 21:06:38 +0100 Chris Cannam Fix maddening failure to start server with space in its path project-file-rework
Tue, 25 Oct 2016 11:04:26 +0100 Chris Cannam Merge project-file-rework
Tue, 25 Oct 2016 10:53:12 +0100 Chris Cannam Add files that I forgot to track on Friday (sigh) piper
Mon, 24 Oct 2016 17:53:33 +0100 Chris Cannam Cut down vastly on the number of config.pri files and places where their contents has to be effectively duplicated without them project-file-rework
Fri, 21 Oct 2016 16:24:30 +0100 Chris Cannam Error reporting for Piper server startup piper
Fri, 21 Oct 2016 14:51:22 +0100 Chris Cannam Fixes to choice of plugin factory piper
Fri, 21 Oct 2016 11:49:27 +0100 Chris Cannam Restore native-Vamp factory and make the choice between Piper and Native a preference piper
Thu, 20 Oct 2016 18:31:02 +0100 Chris Cannam Fix capnp include scenario on Windows piper
Thu, 20 Oct 2016 14:06:58 +0100 Chris Cannam Avoid instantiating all plugins (in piper client) on startup, using plugin static data instead. Problem of where to get the units field from is still pending. piper
Thu, 20 Oct 2016 11:19:34 +0100 Chris Cannam Merge from branch 3.0-integration piper
Thu, 20 Oct 2016 11:16:22 +0100 Chris Cannam Merge from branch msvc2015_64 3.0-integration
Wed, 19 Oct 2016 17:33:32 +0100 Chris Cannam Further MSVC build stuff. Committing this as-is because it's building and running now, but there's a lot to tidy up. msvc2015_64
Wed, 19 Oct 2016 09:11:51 +0100 Chris Cannam Tidy and re-fix for Linux msvc2015_64
Tue, 18 Oct 2016 15:54:56 +0100 Chris Cannam MSVC build fixes msvc2015_64
Tue, 18 Oct 2016 14:04:06 +0100 Chris Cannam Merge from branch "3.0-integration" msvc2015_64
Tue, 18 Oct 2016 14:03:55 +0100 Chris Cannam MSVC build fixes msvc2015_64
Tue, 18 Oct 2016 14:03:35 +0100 Chris Cannam MatrixFile is no longer used 3.0-integration
Mon, 17 Oct 2016 16:39:36 +0100 Chris Cannam Fix compiler warnings piper
Mon, 17 Oct 2016 14:55:05 +0100 Chris Cannam Restore plugin categories piper
Mon, 17 Oct 2016 14:28:43 +0100 Chris Cannam More cautious locking on sparse model modification piper
Mon, 17 Oct 2016 14:18:23 +0100 Chris Cannam Pull out model creation into the transformer thread run(), so that all communications with the plugin server happen on a single thread. Then make the model accessor wait for them to be created (which still happens right at the start of processing) before returning. piper
Fri, 14 Oct 2016 16:23:04 +0100 Chris Cannam Try AutoPlugin; also not very successful piper
Fri, 14 Oct 2016 14:33:43 +0100 Chris Cannam Bodge in piper-cpp client (not yet working) piper
Tue, 20 Sep 2016 09:16:13 +0100 Chris Cannam Merge from default branch 3.0-integration
Tue, 20 Sep 2016 09:16:05 +0100 Chris Cannam Merge from branch tony-2.0-integration 3.0-integration
Fri, 19 Aug 2016 15:58:57 +0100 Chris Cannam Merge latest SV 3.0 branch code tony-2.0-integration
Tue, 16 Aug 2016 16:49:22 +0100 Chris Cannam Compiler warning fixes
Mon, 15 Aug 2016 16:42:19 +0100 Chris Cannam Avoid warning 3.0-integration
Fri, 05 Aug 2016 17:48:52 +0100 Chris Cannam Introduce labels in RangeMapper and use them in AudioDial, though only for tooltip at present. Make use of this for spectrogram magic -81dB/-Inf threshold. Also introduce static strings for inf/pi and use where appropriate. 3.0-integration
Fri, 05 Aug 2016 15:05:02 +0100 Chris Cannam Merge work on unified spectrogram and colour 3d plot caching renderer 3.0-integration
Fri, 05 Aug 2016 14:31:16 +0100 Chris Cannam Fixes to phase display and colour scale for it; tidy up some debug output spectrogram-minor-refactor
Thu, 04 Aug 2016 14:02:56 +0100 Chris Cannam Restore phase display spectrogram-minor-refactor
Wed, 03 Aug 2016 16:16:23 +0100 Chris Cannam Re-enable (little-used) normalise-visible-range option in spectrogram layer spectrogram-minor-refactor
Wed, 03 Aug 2016 14:19:56 +0100 Chris Cannam Avoid overrun-by-1 spectrogram-minor-refactor
Mon, 01 Aug 2016 16:25:06 +0100 Chris Cannam Float/double conversion fixes spectrogram-minor-refactor
Mon, 01 Aug 2016 16:21:01 +0100 Chris Cannam Fix threshold in spectrogram -- it wasn't working in the last release. spectrogram-minor-refactor
Mon, 01 Aug 2016 15:06:16 +0100 Chris Cannam Scale range matching spectrogram-minor-refactor
Wed, 20 Jul 2016 13:40:23 +0100 Chris Cannam Toward updating mag cache spectrogram-minor-refactor
Thu, 14 Jul 2016 16:12:05 +0100 Chris Cannam Convert ColumnNormalization to an enum class, and separate out normalize-visible spectrogram-minor-refactor
Thu, 14 Jul 2016 14:49:04 +0100 Chris Cannam Fix potential crash in Dense3dModelPeakCache owing to combination of wrong width calculation and wrong handling of width overrun spectrogram-minor-refactor
Wed, 13 Jul 2016 13:06:28 +0100 Chris Cannam Create, but don't yet use, a renderer in the colour 3d plot layer spectrogram-minor-refactor
Thu, 23 Jun 2016 14:43:00 +0100 Chris Cannam Comments and naming spectrogram-minor-refactor
Thu, 23 Jun 2016 08:45:52 +0100 Chris Cannam Small fix to compiler warning spectrogram-minor-refactor
Mon, 20 Jun 2016 12:00:32 +0100 Chris Cannam Extend column logic to peak frequency display as well, and correct some scopes according to whether values are per source column or per target pixel spectrogram-minor-refactor
Mon, 20 Jun 2016 11:30:15 +0100 Chris Cannam Pull out column ops into ColumnOp spectrogram-minor-refactor
Mon, 13 Jun 2016 16:17:44 +0100 Chris Cannam Mid-refactor to pull out the bulk of paintDrawBuffer into chunks spectrogram-minor-refactor
Wed, 27 Apr 2016 11:04:32 +0100 Chris Cannam OSX build fixes 3.0-integration
Thu, 21 Apr 2016 15:29:30 +0100 Chris Cannam Merge from the default branch 3.0-integration
Wed, 20 Apr 2016 12:06:28 +0100 Chris Cannam Merge branches 3.0-integration and imaf_enc to 3.0-plus-imaf 3.0-plus-imaf
Fri, 15 Apr 2016 16:26:15 +0100 Chris Cannam Merge from branch pluginscan 3.0-integration
Fri, 15 Apr 2016 16:13:06 +0100 Chris Cannam Check for plugin scan helper checker helper program in suitable directory, & tidy up warning messages somewhat pluginscan
Thu, 14 Apr 2016 16:52:55 +0100 Chris Cannam Update for adjusted checker layout, and tidy pluginscan
Thu, 14 Apr 2016 14:03:18 +0100 Chris Cannam Make use of, and warn for, the plugin checker for all types of plugin. Haven't yet resolved the question of how to install and find it. pluginscan
Thu, 14 Apr 2016 12:12:04 +0100 Chris Cannam First cut running (but not yet using output of, or recovering from errors in) the plugin checker at startup pluginscan
Mon, 21 Mar 2016 10:02:21 +0000 Chris Cannam Add -ldl in a couple more places
Fri, 18 Mar 2016 15:30:28 +0000 Chris Cannam Win32 build fix
Fri, 18 Mar 2016 14:25:05 +0000 Chris Cannam Start including Vamp SDK into main build, as we do with Sonic Annotator 3.0-integration
Fri, 18 Mar 2016 13:42:54 +0000 Chris Cannam Presume that the Vamp SDK exists at the directory next door
Fri, 04 Mar 2016 12:38:20 +0000 Chris Cannam Merge from default branch 3.0-integration
Fri, 04 Mar 2016 12:29:35 +0000 Chris Cannam Merge
Fri, 04 Mar 2016 09:50:09 +0000 Chris Cannam Fix display of 3d model data in data editor, by adding start frame offset (formerly ignored)
Wed, 02 Mar 2016 16:16:36 +0000 Chris Cannam Merge from default branch 3.0-integration
Thu, 25 Feb 2016 13:02:57 +0000 Chris Cannam ...commented out
Thu, 25 Feb 2016 13:02:46 +0000 Chris Cannam Debug
Fri, 22 Jan 2016 09:52:08 +0000 Chris Cannam Debug bits
Tue, 19 Jan 2016 12:32:30 +0000 Chris Cannam Show warning to the user when plugin population has problems
Mon, 11 Jan 2016 14:18:56 +0000 Chris Cannam Check for plugin loadability before trying to load in the main process (POSIX only so far)
Fri, 08 Jan 2016 15:39:12 +0000 Chris Cannam Pull out candidate list
Thu, 25 Feb 2016 10:53:10 +0000 Chris Cannam Better error reporting for transform load (from RDF and XML)
Wed, 24 Feb 2016 11:35:51 +0000 Chris Cannam Work around libsndfile-1.0.26 bug that reports all files as non-seekable
Wed, 24 Feb 2016 10:28:47 +0000 Chris Cannam Use float format for cached files in CodedAudioFileReader, to preserve internal representation (see comment)
Thu, 04 Feb 2016 11:16:05 +0000 Chris Cannam Merge from the default branch 3.0-integration
Thu, 04 Feb 2016 11:13:39 +0000 Chris Cannam Merge from branch "tony-2.0-integration" 3.0-integration
Sat, 30 Jan 2016 12:08:50 +0000 Chris Cannam Merge
Sat, 30 Jan 2016 12:05:14 +0000 Chris Cannam Update acinclude files to look for qt5-qmake as well as qmake-qt5
Fri, 22 Jan 2016 18:12:06 +0000 Chris Cannam Small possible speedup 3.0-integration
Fri, 22 Jan 2016 17:08:02 +0000 Chris Cannam Tidy a bit 3.0-integration
Fri, 22 Jan 2016 13:39:45 +0000 Chris Cannam Convert 3d model column type from QVector to std::vector; replace another user of ResizeableBitset 3.0-integration
Fri, 22 Jan 2016 12:46:42 +0000 Chris Cannam Don't need ResizeableBitset, vector<bool> is already a compact format 3.0-integration
Fri, 22 Jan 2016 12:46:19 +0000 Chris Cannam Fix one-block rounding error when zoomed a long way out, visible as an offset toward the end of very long audio files 3.0-integration
Fri, 22 Jan 2016 09:52:30 +0000 Chris Cannam Adjust locking when filling range cache in background thread, so as to spend less time waiting on locks 3.0-integration
Fri, 22 Jan 2016 09:52:08 +0000 Chris Cannam Debug bits 3.0-integration
Tue, 19 Jan 2016 12:32:30 +0000 Chris Cannam Show warning to the user when plugin population has problems 3.0-integration
Mon, 11 Jan 2016 14:18:56 +0000 Chris Cannam Check for plugin loadability before trying to load in the main process (POSIX only so far) 3.0-integration
Fri, 08 Jan 2016 15:39:12 +0000 Chris Cannam Pull out candidate list 3.0-integration
Wed, 18 Nov 2015 12:08:33 +0000 Chris Cannam Merge from default branch 3.0-integration
Wed, 04 Nov 2015 14:18:22 +0000 Chris Cannam OSX build stuff
Wed, 04 Nov 2015 12:06:12 +0000 Chris Cannam Write Track in RDF only if title/artist metadata present, not simply on the basis of a TrackMetadata object existing
Wed, 04 Nov 2015 10:07:29 +0000 Chris Cannam Update JAMS output to JAMS v0.2.0. We now (for the first time?!) write actual JAMS schema-compliant output when possible, though it isn't possible for many types of plugin. The output for all tested combinations of transforms is valid JSON even where it isn't schema-compliant.
Tue, 03 Nov 2015 14:31:58 +0000 Chris Cannam Add & test the digits option in the CSV file writer
Tue, 03 Nov 2015 12:41:15 +0000 Chris Cannam Merge
Tue, 03 Nov 2015 11:34:44 +0000 Chris Cannam Debug outputs
Tue, 03 Nov 2015 11:34:23 +0000 Chris Cannam Handle unknown type
Tue, 03 Nov 2015 11:34:07 +0000 Chris Cannam Make it possible to report that a transform is of unknown type (e.g. invalid transform id, user mixed up filename and transform id, etc)
Thu, 22 Oct 2015 11:53:06 +0100 Chris Cannam Build fix
Tue, 20 Oct 2015 12:54:06 +0100 Chris Cannam Return maximum through getNormalizedMagnitudesAt to avoid having to make more than one call tony-2.0-integration
Wed, 14 Oct 2015 10:19:48 +0100 Chris Cannam Merge from branch "3.0-integration" tony-2.0-integration
Wed, 14 Oct 2015 10:12:14 +0100 Chris Cannam Merge from branch "tony-2.0-integration" 3.0-integration
Tue, 13 Oct 2015 14:26:40 +0100 Chris Cannam Adjust model update during recording or writing a new wave file. Formerly we were using the model's completion percentage to indicate write proportion and completion -- that's not a good idea because some layers will reasonably avoid rendering at all until a model reaches 100% completion (it's supposed to report only progress on the initial model generation, and the model shouldn't change during completion updates). tony-2.0-integration
Mon, 12 Oct 2015 15:06:15 +0100 Chris Cannam Fix lock contention in FFTapi 3.0-integration
Mon, 12 Oct 2015 15:06:15 +0100 Chris Cannam Fix lock contention in FFTapi tony-2.0-integration
Mon, 12 Oct 2015 13:38:24 +0100 Chris Cannam Merge from the default branch tony-2.0-integration
Tue, 01 Sep 2015 17:05:32 +0100 Chris Cannam Add mandatory option --json-format to JSON feature writer, in preparation for supporting multiple JSON formats (perhaps) in future
Tue, 01 Sep 2015 15:51:07 +0100 Chris Cannam Simple MIDI writer test
Thu, 20 Aug 2015 15:33:13 +0100 Chris Cannam Back out Matthias's e22bfe8ca248 in the hope that my (earlier but on a different branch, and now merged) fix 882d448c8a6d will do the right thing tony-2.0-integration
Thu, 20 Aug 2015 14:54:21 +0100 Chris Cannam Merge through to branch for Tony 2.0 tony-2.0-integration
Thu, 20 Aug 2015 13:33:46 +0100 Chris Cannam Merge from default branch 3.0-integration
Thu, 20 Aug 2015 13:15:19 +0100 Chris Cannam Merge from branch recording 3.0-integration
Thu, 20 Aug 2015 12:22:17 +0100 Chris Cannam Fix reloading session with recorded audio recording
Wed, 19 Aug 2015 17:03:31 +0100 Chris Cannam Make WritableWaveFileModel a true WaveFileModel (and ReadOnlyWaveFileModel the other sort of it). Enable recording from an empty session using that. recording
Wed, 19 Aug 2015 16:36:21 +0100 Chris Cannam Remove unused dependency on Rubber Band
Wed, 19 Aug 2015 16:32:46 +0100 Chris Cannam svcore should not depend on rubberband
Fri, 14 Aug 2015 18:16:14 +0100 Matthias Mauch fixes the problem that the last note was not exported to csv tonioni
Tue, 04 Aug 2015 16:39:40 +0100 Chris Cannam Merge from branch bqaudioio 3.0-integration
Tue, 04 Aug 2015 13:27:42 +0100 Chris Cannam Initial work toward switching to bqaudioio library (so as to get I/O, not just O) bqaudioio
Tue, 04 Aug 2015 10:49:24 +0100 Chris Cannam Necessary include 3.0-integration
Tue, 14 Jul 2015 15:04:46 +0100 alo removed imaf sliders imaf_enc
Tue, 07 Jul 2015 17:39:06 +0100 Chris Cannam Merge from default branch 3.0-integration
Fri, 03 Jul 2015 16:09:14 +0100 Chris Cannam Fix assignment of values to regions on import, in case where region model contains duplicate points
Wed, 01 Jul 2015 18:31:28 +0100 Chris Cannam Merge from branch simple-fft-model 3.0-integration
Wed, 07 Jan 2015 17:42:21 +0000 Chris Cannam Merge from default branch simple-fft-model
Wed, 01 Jul 2015 15:53:54 +0100 Chris Cannam Fix a number of warnings in the 32-bit build
Wed, 01 Jul 2015 13:27:03 +0100 Chris Cannam Merge from branch simple-fft-model 3.0-integration
Tue, 30 Jun 2015 10:26:23 +0100 Chris Cannam Merge simple-fft-model
Tue, 30 Jun 2015 10:25:32 +0100 Chris Cannam Build fix simple-fft-model
Fri, 26 Jun 2015 14:08:05 +0100 Chris Cannam Merge from branch normalize_hybrid_option 3.0-integration
Fri, 26 Jun 2015 14:07:25 +0100 Chris Cannam Merge from branch simple-fft-model 3.0-integration
Tue, 16 Jun 2015 20:32:44 +0100 Chris Cannam Two-channel test simple-fft-model
Tue, 16 Jun 2015 20:28:23 +0100 Chris Cannam Fix a cache-related dumbitude simple-fft-model
Mon, 15 Jun 2015 19:32:30 +0100 Chris Cannam Raise this maximum, so longer files can be shown in the overview pane simple-fft-model
Mon, 15 Jun 2015 19:01:44 +0100 Chris Cannam Use in-memory cache for WAV files as well, if appropriate simple-fft-model
Mon, 15 Jun 2015 16:02:58 +0100 Chris Cannam Smooth signal flow through from file to fft model simple-fft-model
Mon, 15 Jun 2015 15:35:57 +0100 Chris Cannam More tests simple-fft-model
Mon, 15 Jun 2015 14:35:37 +0100 Chris Cannam Store temporary audio files in memory if we have plenty of it simple-fft-model
Mon, 15 Jun 2015 12:38:50 +0100 Chris Cannam Tidy simple-fft-model
Mon, 15 Jun 2015 12:19:47 +0100 Chris Cannam Rework audio file reader API to prefer using std containers simple-fft-model
Sat, 13 Jun 2015 08:47:05 +0100 Chris Cannam Fix to fft cache simple-fft-model
Fri, 12 Jun 2015 19:18:56 +0100 Chris Cannam A small cache for source samples simple-fft-model
Fri, 12 Jun 2015 18:50:52 +0100 Chris Cannam Make a small cache of recently-used columns simple-fft-model
Fri, 12 Jun 2015 18:20:09 +0100 Chris Cannam Normalization function simple-fft-model
Fri, 12 Jun 2015 18:08:57 +0100 Chris Cannam Simplest naive FFTModel implementation (+ fill in tests) simple-fft-model
Fri, 12 Jun 2015 14:51:46 +0100 Chris Cannam Gut the old code, but don't replace it yet (so nothing will link yet) simple-fft-model
Fri, 12 Jun 2015 13:46:44 +0100 Chris Cannam More tests simple-fft-model
Fri, 12 Jun 2015 12:41:19 +0100 Chris Cannam Start making the FFT model tests into proper tests
Thu, 11 Jun 2015 09:09:11 +0100 Chris Cannam Tidy
Wed, 10 Jun 2015 17:06:02 +0100 Chris Cannam Tidy dense time-value model API a bit; add first simple unit test for FFT model
Wed, 10 Jun 2015 14:44:09 +0100 Chris Cannam Remove some obsolete unused files
Wed, 10 Jun 2015 13:31:21 +0100 Chris Cannam Fix overflow in width calculation
Wed, 10 Jun 2015 13:14:32 +0100 Chris Cannam Merge
Wed, 10 Jun 2015 13:12:39 +0100 Chris Cannam Merge
Wed, 10 Jun 2015 13:12:29 +0100 Chris Cannam Do not attempt to switch from read-only to read-write mode if an error is pending (may cause mutex deadlock)
Wed, 10 Jun 2015 13:12:06 +0100 Chris Cannam Tighten up error handling
Wed, 10 Jun 2015 13:11:45 +0100 Chris Cannam Emit a signal if transform fails
Wed, 10 Jun 2015 13:10:26 +0100 Chris Cannam Fail upfront if the file is going to be too large. We expect the caller to split up large data sets into several MatrixFiles
Wed, 10 Jun 2015 13:09:14 +0100 Chris Cannam Comment
Wed, 10 Jun 2015 13:08:30 +0100 Chris Cannam Avoid compiler warning
Fri, 05 Jun 2015 10:00:26 +0100 Chris Cannam More optional debug out
Thu, 21 May 2015 16:38:52 +0100 Chris Cannam Merge
Thu, 21 May 2015 16:38:07 +0100 Chris Cannam minor debug thing
Fri, 15 May 2015 09:15:57 +0100 Chris Cannam Fix #1222 CSV export of time-instants layer omits last point
Thu, 14 May 2015 14:04:41 +0100 Chris Cannam Handle case where plugin erroneously returns sample rate 0 for fixed-rate output
Tue, 12 May 2015 16:19:45 +0100 Chris Cannam Fixes to, and tests for, RealTime-to-text methods
Mon, 20 Apr 2015 09:11:34 +0100 Chris Cannam Merge from branch tonioni
Mon, 13 Apr 2015 13:52:05 +0100 Chris Cannam Revert to -Werror in debug only tonioni
Tue, 31 Mar 2015 13:06:29 +0100 Chris Cannam Remove some debug; set some gain values tonioni
Tue, 31 Mar 2015 12:27:56 +0100 Chris Cannam Permit extending nominal end of sparse model tonioni
Tue, 31 Mar 2015 12:12:31 +0100 Chris Cannam clone() is never used (therefore presumably never works either) tonioni
Tue, 31 Mar 2015 11:54:57 +0100 Chris Cannam Implement FillGaps option in SparseModel export tonioni
Tue, 31 Mar 2015 11:05:02 +0100 Chris Cannam Wire options into CSVFileWriter; omit levels from Tony note export tonioni
Tue, 31 Mar 2015 10:39:54 +0100 Chris Cannam Merge tonioni
Tue, 31 Mar 2015 10:36:52 +0100 Chris Cannam Thread-local debug was causing crash on exit with Qt 5.4.x. But we introduced that because QDebug itself was crashing when used from multiple threads. Replace with simpler fstream version tonioni
Mon, 30 Mar 2015 17:27:25 +0100 Chris Cannam Add data export options (not all implemented yet) tonioni
Mon, 30 Mar 2015 16:58:01 +0100 Chris Cannam M_PI tonioni
Wed, 25 Mar 2015 10:54:51 +0000 Chris Cannam Fix to opening debug file tonioni
Mon, 23 Mar 2015 11:26:28 +0000 Chris Cannam Merge from cxx11 branch tonioni
Mon, 23 Mar 2015 10:04:48 +0000 Chris Cannam Merge from default branch tonioni
Wed, 11 Mar 2015 13:30:37 +0000 Chris Cannam Build fixes for OS/X cxx11
Wed, 11 Mar 2015 12:20:06 +0000 Chris Cannam c++11 flag in qmake project cxx11
Wed, 11 Mar 2015 11:52:05 +0000 Chris Cannam Minor simplification; could use more cxx11
Wed, 11 Mar 2015 11:03:22 +0000 Chris Cannam Fix buffer overwrite in normalised case cxx11
Wed, 11 Mar 2015 09:29:44 +0000 Chris Cannam Comments etc cxx11
Tue, 10 Mar 2015 20:03:08 +0000 Chris Cannam Merge cxx11
Tue, 10 Mar 2015 20:02:02 +0000 Chris Cannam Doh cxx11
Tue, 10 Mar 2015 17:23:45 +0000 Chris Cannam More type fixes. We now build with -Wconversion, on this platform (64-bit Linux) at least. cxx11
Tue, 10 Mar 2015 17:02:52 +0000 Chris Cannam Further dedicated-types fixes cxx11
Tue, 10 Mar 2015 13:22:10 +0000 Chris Cannam More type fixes cxx11
Tue, 10 Mar 2015 10:31:27 +0000 Chris Cannam More type fixes, primarily in the spectrogram cxx11
Mon, 09 Mar 2015 12:02:10 +0000 Chris Cannam Move to using double rather than float for floating-point calculations (float only for storage); more build fixes cxx11
Wed, 04 Mar 2015 19:08:21 +0000 Chris Cannam More type-size adjustments cxx11
Wed, 04 Mar 2015 13:52:48 +0000 Chris Cannam More build fixes cxx11
Wed, 04 Mar 2015 12:30:41 +0000 Chris Cannam Replace the get*Frames calls in AudioFileReader with less stupid API cxx11
Wed, 04 Mar 2015 12:01:04 +0000 Chris Cannam Introduce and use a samplerate type cxx11
Tue, 03 Mar 2015 17:09:19 +0000 Chris Cannam This code now compiles. Main problem: sample rate types cxx11
Tue, 03 Mar 2015 15:18:24 +0000 Chris Cannam Introducing the signed 64-bit frame index type, and fixing build failures from inclusion of -Wconversion with -Werror. Not finished yet. cxx11
Tue, 03 Mar 2015 09:33:59 +0000 Chris Cannam Merge from default branch cxx11
Mon, 02 Mar 2015 17:21:34 +0000 Chris Cannam Merge
Mon, 02 Mar 2015 17:17:59 +0000 Chris Cannam Require (and provide) text codec for output stream -- fixing #1153 (wrong codec used when writing RDF)
Thu, 26 Feb 2015 09:44:08 +0000 Chris Cannam Update and merge
Thu, 26 Feb 2015 09:43:12 +0000 Chris Cannam Debug reporting from FileSource
Tue, 24 Feb 2015 17:42:00 +0000 Chris Cannam Enable ThreadSanitizer datarace
Wed, 18 Feb 2015 12:08:17 +0000 Chris Cannam Add option to toggle H:M:S time display (when off, just show seconds even when more than 60)
Fri, 13 Feb 2015 13:30:28 +0000 Chris Cannam Use filename as object name when reading data file to model (so it shows in the resulting layer name)
Fri, 13 Feb 2015 13:29:44 +0000 Chris Cannam Compile fix
Wed, 14 Jan 2015 14:58:38 +0000 Chris Cannam RealTime frame-conversion test
Mon, 09 Feb 2015 10:31:07 +0000 Chris Cannam Merge from default branch cxx11
Mon, 09 Feb 2015 10:27:21 +0000 Chris Cannam Pending coreaudio-metadata
Mon, 08 Dec 2014 15:37:12 +0000 Chris Cannam Use double instead of float for frequencies in Pitch, just for confidence
Tue, 02 Dec 2014 17:53:17 +0000 Chris Cannam Wire up note/octave stuff
Tue, 02 Dec 2014 13:50:49 +0000 Chris Cannam Start adding piano note
Mon, 01 Dec 2014 15:42:58 +0000 Chris Cannam Unit tests for StringBits::splitQuoted
Mon, 01 Dec 2014 10:18:55 +0000 Chris Cannam If the first column of a CSV file has zero or one non-empty values in it, during the first 5 rows, then ignore it by default
Thu, 27 Nov 2014 17:51:21 +0000 Chris Cannam Merge
Thu, 27 Nov 2014 17:50:34 +0000 Chris Cannam Fix close-quote immediately before separator in StringBits::splitQuoted
Thu, 20 Nov 2014 16:18:31 +0000 Chris Cannam Avoid crash when setting alignment to 0
Thu, 20 Nov 2014 15:47:05 +0000 Chris Cannam Merge
Thu, 20 Nov 2014 15:46:19 +0000 Chris Cannam Make alignment using an external program asynchronous
Thu, 20 Nov 2014 12:30:16 +0000 Chris Cannam Couple more RealTime tests
Wed, 19 Nov 2014 15:28:51 +0000 Chris Cannam Another RealTime test
Mon, 17 Nov 2014 17:10:29 +0000 Chris Cannam Merge
Mon, 17 Nov 2014 17:09:32 +0000 Chris Cannam Start RealTime tests
Mon, 17 Nov 2014 15:31:07 +0000 Chris Cannam CXX11 (-std=c++11) branch, to test build environments before making any code adaptations cxx11
Fri, 14 Nov 2014 17:23:38 +0000 Chris Cannam Provide access to local filename
Fri, 14 Nov 2014 17:23:27 +0000 Chris Cannam Provide reader from QIODevice
Fri, 14 Nov 2014 13:51:33 +0000 Chris Cannam When using an aggregate model to pass data to a transform, zero-pad the shorter input to the duration of the longer rather than truncating the longer. (This is better behaviour for e.g. MATCH, and in any case the code was previously truncating incorrectly and ending up with garbage data at the end.)
Mon, 10 Nov 2014 09:19:49 +0000 Chris Cannam Merge from default branch tonioni
Wed, 15 Oct 2014 17:02:48 +0100 Chris Cannam TransformId is not sufficient -- it could be ambiguous (same transform id, different parameters etc). Use the whole transform
Wed, 15 Oct 2014 16:05:15 +0100 Chris Cannam Add setNofM logic which the JSON writer can use to write a list when sending multiple files' worth to a single target
Wed, 15 Oct 2014 13:30:14 +0100 Chris Cannam Write window type too
Wed, 15 Oct 2014 13:06:27 +0100 Chris Cannam Add plugin_version to transform RDF serialisation (if non-empty)
Wed, 15 Oct 2014 10:38:17 +0100 Chris Cannam Add omit-filename option to CSV writer (and test it while testing lab writer)
Wed, 15 Oct 2014 10:18:13 +0100 Chris Cannam Add fill-ends option to CSV writer (and test it)
Tue, 14 Oct 2014 17:30:37 +0100 Chris Cannam Implement end-times option for CSV writer (not yet tested)
Tue, 14 Oct 2014 10:07:02 +0100 Chris Cannam Add MIDI destinations tests and fix feature writer bugs resulting from them
Mon, 13 Oct 2014 14:44:51 +0100 Chris Cannam Add descriptions for writers; add housekeeping options to Sonic Annotator to list writers and formats
Mon, 13 Oct 2014 10:56:16 +0100 Chris Cannam Separate out stdout ability (not all writers that support one-file will necessarily want to support it, e.g. for binary formats)
Mon, 13 Oct 2014 10:55:43 +0100 Chris Cannam Add MIDI channel to note data and MIDI writer
Mon, 13 Oct 2014 10:00:54 +0100 Chris Cannam Write sample rate from output descriptor, for FixedSampleRate outputs
Fri, 10 Oct 2014 15:24:28 +0100 Chris Cannam Support plugin version in RDF transforms, and bail out in Sonic Annotator if it doesn't match
Wed, 08 Oct 2014 13:14:17 +0100 Chris Cannam Disconnect signals before abandoning reply object, avoiding "reply unknown" error
Fri, 03 Oct 2014 15:28:31 +0100 Chris Cannam Merge
Fri, 03 Oct 2014 15:27:02 +0100 Chris Cannam Handle variable columns by importing all of them (not just the minimum number)
Fri, 03 Oct 2014 15:09:27 +0100 Chris Cannam Add milliseconds as CSV import timing option
Fri, 03 Oct 2014 09:29:11 +0100 Chris Cannam Comment only
Wed, 01 Oct 2014 14:06:28 +0100 Chris Cannam Fix reading duration from transform XML (it was setting the start time instead!)
Wed, 01 Oct 2014 09:20:24 +0100 Chris Cannam Scary warning if transform RDF fails to use XSD duration format
Mon, 29 Sep 2014 13:27:13 +0100 Chris Cannam Correct some really stupid fixed-length string stuff, including a genuine stack overflow that causes a crash on OS/X for certain colour 3d plot data.
Tue, 16 Sep 2014 10:29:19 +0100 Chris Cannam Fix #1058 clicking row in Layer Edit dialog when colour 3d plot layer active jumps to wrong frame (was using sample rate where resolution intended)
Fri, 12 Sep 2014 11:38:55 +0100 Chris Cannam Experimentally add the hybrid normalisation as an option (not working well either in UI or implementation) normalize_hybrid_option
Wed, 10 Sep 2014 09:40:45 +0100 Chris Cannam If the old and new-style user resource prefixes return different results, move across resources from old to new to prime the new path first time we look it up
Tue, 09 Sep 2014 20:37:07 +0100 Chris Cannam Use QStandardPaths::writableLocation(DataLocation) instead of synthesising path ourselves (hopefully fixing encoding difficulties on Windows)
Tue, 09 Sep 2014 16:52:24 +0100 Chris Cannam Respond tidily to user cancellation during download, instead of going on to attempt to load the nonexistent file as a non-audio format
Tue, 09 Sep 2014 16:36:21 +0100 Chris Cannam Merge from default branch tonioni
Wed, 03 Sep 2014 13:10:19 +0100 Chris Cannam Fix potential null pointer deref
Wed, 03 Sep 2014 13:08:32 +0100 Chris Cannam Fix memory leak (from coverity scan)
Wed, 03 Sep 2014 13:06:13 +0100 Chris Cannam Fix some uninitialised values (from coverity scan)
Wed, 03 Sep 2014 11:27:23 +0100 Chris Cannam Fix some (probably benign) uninitialised members (from coverity scan)
Wed, 03 Sep 2014 11:26:21 +0100 Chris Cannam Fix some potential null derefs (from coverity scan)
Wed, 03 Sep 2014 11:22:46 +0100 Chris Cannam Fix memory leak
Wed, 03 Sep 2014 11:20:18 +0100 Chris Cannam Fix various slightly dodgy derefs and the like (from coverity scan)
Wed, 03 Sep 2014 11:10:22 +0100 Chris Cannam Fix some (probably benign) uninitialised members (from coverity scan)
Wed, 03 Sep 2014 11:09:26 +0100 Chris Cannam Fix some (probably benign) uninitialised members (from coverity scan)
Wed, 03 Sep 2014 11:07:12 +0100 Chris Cannam Remove redundant code (from coverity scan)
Wed, 03 Sep 2014 11:06:19 +0100 Chris Cannam Fix very minor but erroneous non-float-arithmetic
Wed, 03 Sep 2014 11:04:41 +0100 Chris Cannam clarify
Wed, 03 Sep 2014 11:01:50 +0100 Chris Cannam Fix some (probably benign) uninitialised members (from coverity scan)
Wed, 03 Sep 2014 11:00:19 +0100 Chris Cannam Fix some (probably benign) uninitialised members (from coverity scan)
Wed, 03 Sep 2014 10:56:59 +0100 Chris Cannam Backed out changeset 6b5e1edd95fc. I had misunderstood, the container is a vector, not a map, so the fix doesn't work and the original code (although definitely flawed) actually does
Wed, 03 Sep 2014 10:49:38 +0100 Chris Cannam Fix to iterator invalidation (from coverity scan)
Wed, 03 Sep 2014 10:40:37 +0100 Chris Cannam As coverity points out, MIDI_END_OF_EXCLUSIVE (0xF7) cannot result from masking with MIDI_MESSAGE_TYPE_MASK(0xF0). Not that it really matters here.
Wed, 03 Sep 2014 09:58:31 +0100 Chris Cannam Fix return of empty string as bool value (from coverity scan, interesting the compiler doesn't mind)
Wed, 03 Sep 2014 09:57:30 +0100 Chris Cannam Frame this condition more defensively (from coverity scan)
Wed, 03 Sep 2014 09:56:18 +0100 Chris Cannam Fix fallthrough in switch (from coverity scan)
Wed, 03 Sep 2014 09:48:51 +0100 Chris Cannam Fix something coverity reports as "copy-paste error" (actually it doesn't matter, but the fix reads better)
Wed, 03 Sep 2014 09:47:52 +0100 Chris Cannam Fix some (probably benign) uninitialised members (from coverity scan)
Wed, 03 Sep 2014 09:46:28 +0100 Chris Cannam Fix accidental declaration of section as bool rather than int (definitely a bug but what did it cause? see #1051, we need units here) (from coverity scan)
Wed, 03 Sep 2014 09:46:01 +0100 Chris Cannam comment only
Wed, 03 Sep 2014 09:39:23 +0100 Chris Cannam Fix some (probably benign) uninitialised members (from coverity scan)
Tue, 02 Sep 2014 16:23:48 +0100 Chris Cannam Update subrepos and merge from default branch tonioni
Wed, 13 Aug 2014 09:50:42 +0100 Chris Cannam Avoid compiler warnings when building without lrdf
Mon, 11 Aug 2014 11:30:18 +0100 Chris Cannam Make sparse time-value layers inaudible by default (user must un-mute them) for compatibility with earlier versions
Fri, 25 Jul 2014 17:02:44 +0100 Chris Cannam Debug output stuff
Fri, 25 Jul 2014 15:21:41 +0100 Chris Cannam Per-thread debug (avoiding some dubious threading problems)
Fri, 18 Jul 2014 11:07:30 +0100 Chris Cannam Merge from default branch tonioni
Thu, 17 Jul 2014 16:22:54 +0100 Chris Cannam Small fixes: avoid static etc
Thu, 17 Jul 2014 14:50:31 +0100 Chris Cannam Fix some errant signals (the modelChanged with args are now modelChangedWithin)
Fri, 04 Jul 2014 11:08:05 +0100 Chris Cannam We do have liblo
Fri, 04 Jul 2014 11:03:33 +0100 Chris Cannam OS/X build/deploy fixes
Wed, 02 Jul 2014 22:04:10 +0100 Chris Cannam Merge from tonioni branch
Wed, 02 Jul 2014 17:31:21 +0100 Chris Cannam Merge from default branch tonioni
Wed, 02 Jul 2014 08:42:33 +0100 Chris Cannam Merge
Wed, 02 Jul 2014 08:42:11 +0100 Chris Cannam Tidy
Wed, 18 Jun 2014 18:30:19 +0100 Chris Cannam Merge from branch tonioni (the two are currently in sync)
Tue, 01 Jul 2014 15:31:25 +0100 Chris Cannam Avoid trying to return out-of-range bin name
Tue, 01 Jul 2014 11:39:09 +0100 Chris Cannam endl to qDebug does not seem to be threadsafe
Mon, 30 Jun 2014 15:02:43 +0100 Chris Cannam Avoid crashing when trying to examine data at column < 0 in 3d model
Wed, 18 Jun 2014 13:51:16 +0100 Chris Cannam Merge from branch warnfix_no_size_t
Wed, 18 Jun 2014 13:42:01 +0100 Chris Cannam Merge from branch warnfix_no_size_t tonioni
Wed, 18 Jun 2014 09:13:25 +0100 Chris Cannam Configure stuff and fixes for -Werror warnfix_no_size_t
Wed, 18 Jun 2014 08:34:46 +0100 Chris Cannam Merge from branch tony_integration warnfix_no_size_t
Tue, 17 Jun 2014 16:42:51 +0100 Chris Cannam Various size_t etc removals, and compiler warning fixes warnfix_no_size_t
Tue, 17 Jun 2014 15:24:55 +0100 Chris Cannam Disambiguate signals warnfix_no_size_t
Tue, 17 Jun 2014 14:49:49 +0100 Chris Cannam More size_t evisceration and warning fixes warnfix_no_size_t
Tue, 17 Jun 2014 14:33:42 +0100 Chris Cannam Unsigned removals and warning fixes in data/ warnfix_no_size_t
Tue, 17 Jun 2014 13:52:07 +0100 Chris Cannam Remove size_t's, fix compiler warnings warnfix_no_size_t
Tue, 17 Jun 2014 12:54:51 +0100 Chris Cannam Merge from branch "tonioni" tony_integration
Tue, 17 Jun 2014 12:52:27 +0100 Chris Cannam Merge from default branch tony_integration
Mon, 16 Jun 2014 11:28:45 +0100 Chris Cannam Add comment about meaning of start and end frame of selection tonioni
Mon, 16 Jun 2014 09:28:12 +0100 Chris Cannam Cancel async layer creation in Tony when selection is changed during it tonioni
Fri, 13 Jun 2014 17:39:01 +0100 Chris Cannam Add an experimental cancel button to view progress bars tonioni
Fri, 13 Jun 2014 16:35:15 +0100 Chris Cannam Remove some debug out tonioni
Fri, 13 Jun 2014 16:12:00 +0100 Chris Cannam Add normalise preference and take it into account in WaveFileModel tonioni
Fri, 13 Jun 2014 16:03:48 +0100 Chris Cannam Add normalised option to CodedAudioFileReader tonioni
Fri, 13 Jun 2014 12:56:31 +0100 Chris Cannam For Tony, resample all audio to 44100 on load tonioni
Tue, 03 Jun 2014 11:14:17 +0100 Chris Cannam Merge from default branch tonioni
Tue, 03 Jun 2014 11:05:49 +0100 Chris Cannam restore brace style
Tue, 03 Jun 2014 10:45:39 +0100 Chris Cannam Merge from branch tonioni
Thu, 29 May 2014 16:27:52 +0100 Chris Cannam Merge from default branch tonioni
Thu, 22 May 2014 17:49:58 +0100 matthiasm implemented move by one note (replacing big jumps left/right) tonioni
Mon, 19 May 2014 10:54:45 +0100 Chris Cannam Fixes to FileSource from Ted Felix (for Rosegarden): avoid blowing up through calling abort() from cleanup() when error occurred; set status correctly for FTP transfers
Wed, 14 May 2014 09:58:07 +0100 Chris Cannam Merge from default branch tonioni
Wed, 14 May 2014 09:54:20 +0100 Chris Cannam Merge from branch tony_integration
Tue, 13 May 2014 09:50:59 +0100 Chris Cannam Avoid potential crash when network connection fails tony_integration
Wed, 07 May 2014 16:51:04 +0100 Chris Cannam Restore selection of playback sample for note layers. Also default to new elecpiano clip. tony_integration
Wed, 07 May 2014 15:18:45 +0100 Chris Cannam Merge from default branch tony_integration
Wed, 07 May 2014 15:17:58 +0100 Chris Cannam Merge from 900:dcfc40fc896e
Wed, 07 May 2014 15:17:51 +0100 Chris Cannam Merge from 899:bc0ff66102a8
Wed, 07 May 2014 15:17:43 +0100 Chris Cannam Merge from 898:5821b64c6b26
Wed, 07 May 2014 15:14:17 +0100 Chris Cannam Merge tony_integration
Wed, 07 May 2014 15:11:56 +0100 Chris Cannam Merge from tonioni branch tony_integration
Sat, 26 Apr 2014 23:05:32 +0100 Chris Cannam More subrepos
Sat, 26 Apr 2014 22:22:19 +0100 Chris Cannam Add some more subrepos tonioni
Sun, 27 Apr 2014 12:22:28 +0100 Chris Cannam Remove pch file
Sat, 26 Apr 2014 22:22:18 +0100 Chris Cannam Add some more subrepos
Sat, 26 Apr 2014 22:22:17 +0100 Chris Cannam Add some more subrepos
Mon, 07 Apr 2014 10:47:15 +0100 Chris Cannam Make it possible to import CSV files directly into Note layers
Wed, 02 Apr 2014 21:50:04 +0100 Chris Cannam A lot of work on saving and reloading sessions: save flexinote layer type and hybrid spectrogram normalisation, etc tonioni
Wed, 02 Apr 2014 08:51:12 +0100 Chris Cannam Merge from branch tonioni tony_integration
Mon, 31 Mar 2014 13:00:17 +0100 Chris Cannam Merge from default branch tony_integration
Tue, 01 Apr 2014 13:27:32 +0100 Chris Cannam Comment out some debug tonioni
Thu, 27 Mar 2014 13:32:56 +0000 Chris Cannam Make octave numbering configurable, and change default to C4 = middle C
Tue, 11 Mar 2014 17:32:31 +0000 Chris Cannam Merge from default branch tony_integration
Tue, 11 Mar 2014 17:30:35 +0000 Chris Cannam Merge from branch tonioni tony_integration
Tue, 11 Mar 2014 17:29:44 +0000 Chris Cannam Use fixed-rate feature no directly as column number, rather than do a calculation that might introduce rounding error
Wed, 05 Mar 2014 18:10:27 +0000 Chris Cannam No config -> default to release mode tonioni
Thu, 06 Feb 2014 18:30:11 +0000 Chris Cannam Prototype these in superclass
Thu, 06 Feb 2014 18:26:18 +0000 Chris Cannam Add bin-values and bin-value unit to EditableDense3DModel
Thu, 06 Feb 2014 15:31:16 +0000 Chris Cannam Add unclamped range mapper methods
Thu, 06 Feb 2014 10:14:59 +0000 Chris Cannam RangeMapperTest -> TestRangeMapper
Thu, 06 Feb 2014 10:14:19 +0000 Chris Cannam RangeMapperTest -> TestRangeMapper
Tue, 04 Feb 2014 13:54:32 +0000 Chris Cannam Avoid compiler warning tonioni
Fri, 31 Jan 2014 17:25:24 +0000 Chris Cannam Comments
Fri, 31 Jan 2014 17:09:02 +0000 Chris Cannam Implement and test the interpolating and auto range mappers
Fri, 31 Jan 2014 13:39:37 +0000 Chris Cannam Unit-test RangeMapper, fix a couple of bugs
Wed, 29 Jan 2014 17:32:08 +0000 Chris Cannam Add a callback for no models as well (so we know something has completed and can e.g. delete the handler) tonioni
Wed, 29 Jan 2014 15:58:15 +0000 Chris Cannam Callback handler for additional models at end of processing tonioni
Wed, 29 Jan 2014 09:31:22 +0000 Chris Cannam For outputs with unknown bin count or multiple bins with variable sample rate, create additional output models for bins beyond the first tonioni
Tue, 28 Jan 2014 18:52:22 +0000 Chris Cannam Use a sparse time-value model only for outputs with fixed bin count of 1, not for those with unknown bin count. tonioni
Tue, 28 Jan 2014 15:01:54 +0000 Chris Cannam Merge from tonioni branch tony_integration
Tue, 14 Jan 2014 16:22:49 +0000 matthiasm added a new elecpiano.wav sound and made it default for the FlexiNoteLayer tonioni
Fri, 10 Jan 2014 15:21:01 +0000 Chris Cannam Add methods to return new Clipboard points with particular characteristics (this is an immutable object) tonioni
Thu, 09 Jan 2014 21:43:33 +0000 Chris Cannam Debug out operator for real time tonioni
Thu, 09 Jan 2014 21:30:33 +0000 Chris Cannam The Mac also has CoreAudio for file loading tonioni
Thu, 09 Jan 2014 09:18:05 +0000 Chris Cannam Use sv-dependency-builds on OS/X as well if no config.pri tonioni
Wed, 08 Jan 2014 13:07:42 +0000 Chris Cannam Sparse time-value models are now theoretically playable (sometimes) tonioni
Wed, 08 Jan 2014 09:59:08 +0000 Chris Cannam Play these with a pitch now (since we support any frequency) tonioni
Tue, 07 Jan 2014 15:52:34 +0000 Chris Cannam sampleId -> clipId tonioni
Tue, 07 Jan 2014 15:49:39 +0000 Chris Cannam SV file compatibility etc for sample stuff tonioni
Tue, 07 Jan 2014 13:09:53 +0000 Chris Cannam sample id instead of plugin data tonioni
Tue, 07 Jan 2014 10:57:28 +0000 Chris Cannam Toward using a sample mixer (with arbitrary frequency target) instead of dssi player plugin tonioni
Wed, 11 Dec 2013 21:40:27 +0000 Chris Cannam Fix handling of negative frame times in returned features from plugin -- we don't handle them, so don't insert them into the model (instead of blowing up)
Wed, 11 Dec 2013 21:39:54 +0000 Chris Cannam Clarify
Wed, 11 Dec 2013 17:36:07 +0000 Chris Cannam Remove obsolete files
Wed, 04 Dec 2013 19:30:02 +0000 Chris Cannam Use a settings setting for flexi/non-flexi determination -- this may not be the right thing in the long run but it's simpler and easier than passing through a random value that doesn't actually come from anywhere tonioni
Wed, 04 Dec 2013 19:29:19 +0000 Chris Cannam Add non-SV-preferred options tonioni
Wed, 04 Dec 2013 18:30:49 +0000 Chris Cannam Merge from default branch tonioni
Wed, 04 Dec 2013 18:29:53 +0000 Chris Cannam Merge from branch "tonioni_multi_transform" tonioni
Wed, 04 Dec 2013 18:29:15 +0000 Chris Cannam Merge from tonioni branch tonioni_multi_transform