annotate Doxyfile @ 1394:9ef1cc26024c

Add Range01 normalisation method to ColumnOp. This is the normalisation that is actually used in the Colour 3D Plot layer historically when column normalisation is enabled (not Max1 after all).
author Chris Cannam
date Tue, 28 Feb 2017 14:04:16 +0000
parents 0696d02f0f3f
children
rev   line source
Chris@719 1 # Doxyfile 1.4.4
Chris@719 2
Chris@719 3 # This file describes the settings to be used by the documentation system
Chris@719 4 # doxygen (www.doxygen.org) for a project
Chris@719 5 #
Chris@719 6 # All text after a hash (#) is considered a comment and will be ignored
Chris@719 7 # The format is:
Chris@719 8 # TAG = value [value, ...]
Chris@719 9 # For lists items can also be appended using:
Chris@719 10 # TAG += value [value, ...]
Chris@719 11 # Values that contain spaces should be placed between quotes (" ")
Chris@719 12
Chris@719 13 #---------------------------------------------------------------------------
Chris@719 14 # Project related configuration options
Chris@719 15 #---------------------------------------------------------------------------
Chris@719 16
Chris@719 17 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
Chris@719 18 # by quotes) that should identify the project.
Chris@719 19
Chris@719 20 PROJECT_NAME = svcore
Chris@719 21
Chris@719 22 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
Chris@719 23 # This could be handy for archiving the generated documentation or
Chris@719 24 # if some version control system is used.
Chris@719 25
Chris@719 26 PROJECT_NUMBER = 1.9
Chris@719 27
Chris@719 28 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
Chris@719 29 # base path where the generated documentation will be put.
Chris@719 30 # If a relative path is entered, it will be relative to the location
Chris@719 31 # where doxygen was started. If left blank the current directory will be used.
Chris@719 32
Chris@719 33 OUTPUT_DIRECTORY = doc
Chris@719 34
Chris@719 35 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
Chris@719 36 # 4096 sub-directories (in 2 levels) under the output directory of each output
Chris@719 37 # format and will distribute the generated files over these directories.
Chris@719 38 # Enabling this option can be useful when feeding doxygen a huge amount of
Chris@719 39 # source files, where putting all generated files in the same directory would
Chris@719 40 # otherwise cause performance problems for the file system.
Chris@719 41
Chris@719 42 CREATE_SUBDIRS = NO
Chris@719 43
Chris@719 44 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
Chris@719 45 # documentation generated by doxygen is written. Doxygen will use this
Chris@719 46 # information to generate all constant output in the proper language.
Chris@719 47 # The default language is English, other supported languages are:
Chris@719 48 # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
Chris@719 49 # Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
Chris@719 50 # Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
Chris@719 51 # Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
Chris@719 52 # Swedish, and Ukrainian.
Chris@719 53
Chris@719 54 OUTPUT_LANGUAGE = English
Chris@719 55
Chris@719 56 # This tag can be used to specify the encoding used in the generated output.
Chris@719 57 # The encoding is not always determined by the language that is chosen,
Chris@719 58 # but also whether or not the output is meant for Windows or non-Windows users.
Chris@719 59 # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
Chris@719 60 # forces the Windows encoding (this is the default for the Windows binary),
Chris@719 61 # whereas setting the tag to NO uses a Unix-style encoding (the default for
Chris@719 62 # all platforms other than Windows).
Chris@719 63
Chris@719 64 USE_WINDOWS_ENCODING = NO
Chris@719 65
Chris@719 66 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
Chris@719 67 # include brief member descriptions after the members that are listed in
Chris@719 68 # the file and class documentation (similar to JavaDoc).
Chris@719 69 # Set to NO to disable this.
Chris@719 70
Chris@719 71 BRIEF_MEMBER_DESC = YES
Chris@719 72
Chris@719 73 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
Chris@719 74 # the brief description of a member or function before the detailed description.
Chris@719 75 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
Chris@719 76 # brief descriptions will be completely suppressed.
Chris@719 77
Chris@719 78 REPEAT_BRIEF = YES
Chris@719 79
Chris@719 80 # This tag implements a quasi-intelligent brief description abbreviator
Chris@719 81 # that is used to form the text in various listings. Each string
Chris@719 82 # in this list, if found as the leading text of the brief description, will be
Chris@719 83 # stripped from the text and the result after processing the whole list, is
Chris@719 84 # used as the annotated text. Otherwise, the brief description is used as-is.
Chris@719 85 # If left blank, the following values are used ("$name" is automatically
Chris@719 86 # replaced with the name of the entity): "The $name class" "The $name widget"
Chris@719 87 # "The $name file" "is" "provides" "specifies" "contains"
Chris@719 88 # "represents" "a" "an" "the"
Chris@719 89
Chris@719 90 ABBREVIATE_BRIEF =
Chris@719 91
Chris@719 92 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
Chris@719 93 # Doxygen will generate a detailed section even if there is only a brief
Chris@719 94 # description.
Chris@719 95
Chris@719 96 ALWAYS_DETAILED_SEC = NO
Chris@719 97
Chris@719 98 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
Chris@719 99 # inherited members of a class in the documentation of that class as if those
Chris@719 100 # members were ordinary class members. Constructors, destructors and assignment
Chris@719 101 # operators of the base classes will not be shown.
Chris@719 102
Chris@719 103 INLINE_INHERITED_MEMB = YES
Chris@719 104
Chris@719 105 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
Chris@719 106 # path before files name in the file list and in the header files. If set
Chris@719 107 # to NO the shortest path that makes the file name unique will be used
Chris@719 108
Chris@719 109 FULL_PATH_NAMES = NO
Chris@719 110
Chris@719 111 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
Chris@719 112 # can be used to strip a user-defined part of the path. Stripping is
Chris@719 113 # only done if one of the specified strings matches the left-hand part of
Chris@719 114 # the path. The tag can be used to show relative paths in the file list.
Chris@719 115 # If left blank the directory from which doxygen is run is used as the
Chris@719 116 # path to strip.
Chris@719 117
Chris@719 118 STRIP_FROM_PATH =
Chris@719 119
Chris@719 120 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
Chris@719 121 # the path mentioned in the documentation of a class, which tells
Chris@719 122 # the reader which header file to include in order to use a class.
Chris@719 123 # If left blank only the name of the header file containing the class
Chris@719 124 # definition is used. Otherwise one should specify the include paths that
Chris@719 125 # are normally passed to the compiler using the -I flag.
Chris@719 126
Chris@719 127 STRIP_FROM_INC_PATH =
Chris@719 128
Chris@719 129 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
Chris@719 130 # (but less readable) file names. This can be useful is your file systems
Chris@719 131 # doesn't support long names like on DOS, Mac, or CD-ROM.
Chris@719 132
Chris@719 133 SHORT_NAMES = NO
Chris@719 134
Chris@719 135 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
Chris@719 136 # will interpret the first line (until the first dot) of a JavaDoc-style
Chris@719 137 # comment as the brief description. If set to NO, the JavaDoc
Chris@719 138 # comments will behave just like the Qt-style comments (thus requiring an
Chris@719 139 # explicit @brief command for a brief description.
Chris@719 140
Chris@719 141 JAVADOC_AUTOBRIEF = YES
Chris@719 142
Chris@719 143 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
Chris@719 144 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
Chris@719 145 # comments) as a brief description. This used to be the default behaviour.
Chris@719 146 # The new default is to treat a multi-line C++ comment block as a detailed
Chris@719 147 # description. Set this tag to YES if you prefer the old behaviour instead.
Chris@719 148
Chris@719 149 MULTILINE_CPP_IS_BRIEF = NO
Chris@719 150
Chris@719 151 # If the DETAILS_AT_TOP tag is set to YES then Doxygen
Chris@719 152 # will output the detailed description near the top, like JavaDoc.
Chris@719 153 # If set to NO, the detailed description appears after the member
Chris@719 154 # documentation.
Chris@719 155
Chris@719 156 DETAILS_AT_TOP = YES
Chris@719 157
Chris@719 158 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
Chris@719 159 # member inherits the documentation from any documented member that it
Chris@719 160 # re-implements.
Chris@719 161
Chris@719 162 INHERIT_DOCS = YES
Chris@719 163
Chris@719 164 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
Chris@719 165 # tag is set to YES, then doxygen will reuse the documentation of the first
Chris@719 166 # member in the group (if any) for the other members of the group. By default
Chris@719 167 # all members of a group must be documented explicitly.
Chris@719 168
Chris@719 169 DISTRIBUTE_GROUP_DOC = NO
Chris@719 170
Chris@719 171 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
Chris@719 172 # a new page for each member. If set to NO, the documentation of a member will
Chris@719 173 # be part of the file/class/namespace that contains it.
Chris@719 174
Chris@719 175 SEPARATE_MEMBER_PAGES = NO
Chris@719 176
Chris@719 177 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
Chris@719 178 # Doxygen uses this value to replace tabs by spaces in code fragments.
Chris@719 179
Chris@719 180 TAB_SIZE = 8
Chris@719 181
Chris@719 182 # This tag can be used to specify a number of aliases that acts
Chris@719 183 # as commands in the documentation. An alias has the form "name=value".
Chris@719 184 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
Chris@719 185 # put the command \sideeffect (or @sideeffect) in the documentation, which
Chris@719 186 # will result in a user-defined paragraph with heading "Side Effects:".
Chris@719 187 # You can put \n's in the value part of an alias to insert newlines.
Chris@719 188
Chris@719 189 ALIASES =
Chris@719 190
Chris@719 191 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
Chris@719 192 # sources only. Doxygen will then generate output that is more tailored for C.
Chris@719 193 # For instance, some of the names that are used will be different. The list
Chris@719 194 # of all members will be omitted, etc.
Chris@719 195
Chris@719 196 OPTIMIZE_OUTPUT_FOR_C = NO
Chris@719 197
Chris@719 198 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
Chris@719 199 # only. Doxygen will then generate output that is more tailored for Java.
Chris@719 200 # For instance, namespaces will be presented as packages, qualified scopes
Chris@719 201 # will look different, etc.
Chris@719 202
Chris@719 203 OPTIMIZE_OUTPUT_JAVA = NO
Chris@719 204
Chris@719 205 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
Chris@719 206 # the same type (for instance a group of public functions) to be put as a
Chris@719 207 # subgroup of that type (e.g. under the Public Functions section). Set it to
Chris@719 208 # NO to prevent subgrouping. Alternatively, this can be done per class using
Chris@719 209 # the \nosubgrouping command.
Chris@719 210
Chris@719 211 SUBGROUPING = YES
Chris@719 212
Chris@719 213 #---------------------------------------------------------------------------
Chris@719 214 # Build related configuration options
Chris@719 215 #---------------------------------------------------------------------------
Chris@719 216
Chris@719 217 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
Chris@719 218 # documentation are documented, even if no documentation was available.
Chris@719 219 # Private class members and static file members will be hidden unless
Chris@719 220 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
Chris@719 221
Chris@719 222 EXTRACT_ALL = YES
Chris@719 223
Chris@719 224 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
Chris@719 225 # will be included in the documentation.
Chris@719 226
Chris@719 227 EXTRACT_PRIVATE = YES
Chris@719 228
Chris@719 229 # If the EXTRACT_STATIC tag is set to YES all static members of a file
Chris@719 230 # will be included in the documentation.
Chris@719 231
Chris@719 232 EXTRACT_STATIC = YES
Chris@719 233
Chris@719 234 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
Chris@719 235 # defined locally in source files will be included in the documentation.
Chris@719 236 # If set to NO only classes defined in header files are included.
Chris@719 237
Chris@719 238 EXTRACT_LOCAL_CLASSES = YES
Chris@719 239
Chris@719 240 # This flag is only useful for Objective-C code. When set to YES local
Chris@719 241 # methods, which are defined in the implementation section but not in
Chris@719 242 # the interface are included in the documentation.
Chris@719 243 # If set to NO (the default) only methods in the interface are included.
Chris@719 244
Chris@719 245 EXTRACT_LOCAL_METHODS = NO
Chris@719 246
Chris@719 247 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
Chris@719 248 # undocumented members of documented classes, files or namespaces.
Chris@719 249 # If set to NO (the default) these members will be included in the
Chris@719 250 # various overviews, but no documentation section is generated.
Chris@719 251 # This option has no effect if EXTRACT_ALL is enabled.
Chris@719 252
Chris@719 253 HIDE_UNDOC_MEMBERS = NO
Chris@719 254
Chris@719 255 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
Chris@719 256 # undocumented classes that are normally visible in the class hierarchy.
Chris@719 257 # If set to NO (the default) these classes will be included in the various
Chris@719 258 # overviews. This option has no effect if EXTRACT_ALL is enabled.
Chris@719 259
Chris@719 260 HIDE_UNDOC_CLASSES = NO
Chris@719 261
Chris@719 262 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
Chris@719 263 # friend (class|struct|union) declarations.
Chris@719 264 # If set to NO (the default) these declarations will be included in the
Chris@719 265 # documentation.
Chris@719 266
Chris@719 267 HIDE_FRIEND_COMPOUNDS = NO
Chris@719 268
Chris@719 269 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
Chris@719 270 # documentation blocks found inside the body of a function.
Chris@719 271 # If set to NO (the default) these blocks will be appended to the
Chris@719 272 # function's detailed documentation block.
Chris@719 273
Chris@719 274 HIDE_IN_BODY_DOCS = NO
Chris@719 275
Chris@719 276 # The INTERNAL_DOCS tag determines if documentation
Chris@719 277 # that is typed after a \internal command is included. If the tag is set
Chris@719 278 # to NO (the default) then the documentation will be excluded.
Chris@719 279 # Set it to YES to include the internal documentation.
Chris@719 280
Chris@719 281 INTERNAL_DOCS = NO
Chris@719 282
Chris@719 283 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
Chris@719 284 # file names in lower-case letters. If set to YES upper-case letters are also
Chris@719 285 # allowed. This is useful if you have classes or files whose names only differ
Chris@719 286 # in case and if your file system supports case sensitive file names. Windows
Chris@719 287 # and Mac users are advised to set this option to NO.
Chris@719 288
Chris@719 289 CASE_SENSE_NAMES = YES
Chris@719 290
Chris@719 291 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
Chris@719 292 # will show members with their full class and namespace scopes in the
Chris@719 293 # documentation. If set to YES the scope will be hidden.
Chris@719 294
Chris@719 295 HIDE_SCOPE_NAMES = NO
Chris@719 296
Chris@719 297 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
Chris@719 298 # will put a list of the files that are included by a file in the documentation
Chris@719 299 # of that file.
Chris@719 300
Chris@719 301 SHOW_INCLUDE_FILES = YES
Chris@719 302
Chris@719 303 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
Chris@719 304 # is inserted in the documentation for inline members.
Chris@719 305
Chris@719 306 INLINE_INFO = YES
Chris@719 307
Chris@719 308 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
Chris@719 309 # will sort the (detailed) documentation of file and class members
Chris@719 310 # alphabetically by member name. If set to NO the members will appear in
Chris@719 311 # declaration order.
Chris@719 312
Chris@719 313 SORT_MEMBER_DOCS = NO
Chris@719 314
Chris@719 315 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
Chris@719 316 # brief documentation of file, namespace and class members alphabetically
Chris@719 317 # by member name. If set to NO (the default) the members will appear in
Chris@719 318 # declaration order.
Chris@719 319
Chris@719 320 SORT_BRIEF_DOCS = NO
Chris@719 321
Chris@719 322 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
Chris@719 323 # sorted by fully-qualified names, including namespaces. If set to
Chris@719 324 # NO (the default), the class list will be sorted only by class name,
Chris@719 325 # not including the namespace part.
Chris@719 326 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
Chris@719 327 # Note: This option applies only to the class list, not to the
Chris@719 328 # alphabetical list.
Chris@719 329
Chris@719 330 SORT_BY_SCOPE_NAME = NO
Chris@719 331
Chris@719 332 # The GENERATE_TODOLIST tag can be used to enable (YES) or
Chris@719 333 # disable (NO) the todo list. This list is created by putting \todo
Chris@719 334 # commands in the documentation.
Chris@719 335
Chris@719 336 GENERATE_TODOLIST = YES
Chris@719 337
Chris@719 338 # The GENERATE_TESTLIST tag can be used to enable (YES) or
Chris@719 339 # disable (NO) the test list. This list is created by putting \test
Chris@719 340 # commands in the documentation.
Chris@719 341
Chris@719 342 GENERATE_TESTLIST = YES
Chris@719 343
Chris@719 344 # The GENERATE_BUGLIST tag can be used to enable (YES) or
Chris@719 345 # disable (NO) the bug list. This list is created by putting \bug
Chris@719 346 # commands in the documentation.
Chris@719 347
Chris@719 348 GENERATE_BUGLIST = YES
Chris@719 349
Chris@719 350 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
Chris@719 351 # disable (NO) the deprecated list. This list is created by putting
Chris@719 352 # \deprecated commands in the documentation.
Chris@719 353
Chris@719 354 GENERATE_DEPRECATEDLIST= YES
Chris@719 355
Chris@719 356 # The ENABLED_SECTIONS tag can be used to enable conditional
Chris@719 357 # documentation sections, marked by \if sectionname ... \endif.
Chris@719 358
Chris@719 359 ENABLED_SECTIONS =
Chris@719 360
Chris@719 361 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
Chris@719 362 # the initial value of a variable or define consists of for it to appear in
Chris@719 363 # the documentation. If the initializer consists of more lines than specified
Chris@719 364 # here it will be hidden. Use a value of 0 to hide initializers completely.
Chris@719 365 # The appearance of the initializer of individual variables and defines in the
Chris@719 366 # documentation can be controlled using \showinitializer or \hideinitializer
Chris@719 367 # command in the documentation regardless of this setting.
Chris@719 368
Chris@719 369 MAX_INITIALIZER_LINES = 30
Chris@719 370
Chris@719 371 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
Chris@719 372 # at the bottom of the documentation of classes and structs. If set to YES the
Chris@719 373 # list will mention the files that were used to generate the documentation.
Chris@719 374
Chris@719 375 SHOW_USED_FILES = YES
Chris@719 376
Chris@719 377 # If the sources in your project are distributed over multiple directories
Chris@719 378 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
Chris@719 379 # in the documentation. The default is YES.
Chris@719 380
Chris@719 381 SHOW_DIRECTORIES = YES
Chris@719 382
Chris@719 383 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
Chris@719 384 # doxygen should invoke to get the current version for each file (typically from the
Chris@719 385 # version control system). Doxygen will invoke the program by executing (via
Chris@719 386 # popen()) the command <command> <input-file>, where <command> is the value of
Chris@719 387 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
Chris@719 388 # provided by doxygen. Whatever the progam writes to standard output
Chris@719 389 # is used as the file version. See the manual for examples.
Chris@719 390
Chris@719 391 FILE_VERSION_FILTER =
Chris@719 392
Chris@719 393 #---------------------------------------------------------------------------
Chris@719 394 # configuration options related to warning and progress messages
Chris@719 395 #---------------------------------------------------------------------------
Chris@719 396
Chris@719 397 # The QUIET tag can be used to turn on/off the messages that are generated
Chris@719 398 # by doxygen. Possible values are YES and NO. If left blank NO is used.
Chris@719 399
Chris@719 400 QUIET = NO
Chris@719 401
Chris@719 402 # The WARNINGS tag can be used to turn on/off the warning messages that are
Chris@719 403 # generated by doxygen. Possible values are YES and NO. If left blank
Chris@719 404 # NO is used.
Chris@719 405
Chris@719 406 WARNINGS = YES
Chris@719 407
Chris@719 408 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
Chris@719 409 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
Chris@719 410 # automatically be disabled.
Chris@719 411
Chris@719 412 WARN_IF_UNDOCUMENTED = YES
Chris@719 413
Chris@719 414 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
Chris@719 415 # potential errors in the documentation, such as not documenting some
Chris@719 416 # parameters in a documented function, or documenting parameters that
Chris@719 417 # don't exist or using markup commands wrongly.
Chris@719 418
Chris@719 419 WARN_IF_DOC_ERROR = YES
Chris@719 420
Chris@719 421 # This WARN_NO_PARAMDOC option can be abled to get warnings for
Chris@719 422 # functions that are documented, but have no documentation for their parameters
Chris@719 423 # or return value. If set to NO (the default) doxygen will only warn about
Chris@719 424 # wrong or incomplete parameter documentation, but not about the absence of
Chris@719 425 # documentation.
Chris@719 426
Chris@719 427 WARN_NO_PARAMDOC = YES
Chris@719 428
Chris@719 429 # The WARN_FORMAT tag determines the format of the warning messages that
Chris@719 430 # doxygen can produce. The string should contain the $file, $line, and $text
Chris@719 431 # tags, which will be replaced by the file and line number from which the
Chris@719 432 # warning originated and the warning text. Optionally the format may contain
Chris@719 433 # $version, which will be replaced by the version of the file (if it could
Chris@719 434 # be obtained via FILE_VERSION_FILTER)
Chris@719 435
Chris@719 436 WARN_FORMAT = "$file:$line: $text"
Chris@719 437
Chris@719 438 # The WARN_LOGFILE tag can be used to specify a file to which warning
Chris@719 439 # and error messages should be written. If left blank the output is written
Chris@719 440 # to stderr.
Chris@719 441
Chris@719 442 WARN_LOGFILE = docs/doxygen/warning.log
Chris@719 443
Chris@719 444 #---------------------------------------------------------------------------
Chris@719 445 # configuration options related to the input files
Chris@719 446 #---------------------------------------------------------------------------
Chris@719 447
Chris@719 448 # The INPUT tag can be used to specify the files and/or directories that contain
Chris@719 449 # documented source files. You may enter file names like "myfile.cpp" or
Chris@719 450 # directories like "/usr/src/myproject". Separate the files or directories
Chris@719 451 # with spaces.
Chris@719 452
Chris@719 453 INPUT = base data/fft data/fileio data/midi data/model data/osc plugin plugin/plugins transform rdf system
Chris@719 454
Chris@719 455 # If the value of the INPUT tag contains directories, you can use the
Chris@719 456 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
Chris@719 457 # and *.h) to filter out the source-files in the directories. If left
Chris@719 458 # blank the following patterns are tested:
Chris@719 459 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
Chris@719 460 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
Chris@719 461
Chris@719 462 FILE_PATTERNS = *.h \
Chris@719 463 *.C \
Chris@719 464 *.cpp \
Chris@719 465 *.cc
Chris@719 466
Chris@719 467 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
Chris@719 468 # should be searched for input files as well. Possible values are YES and NO.
Chris@719 469 # If left blank NO is used.
Chris@719 470
Chris@719 471 RECURSIVE = NO
Chris@719 472
Chris@719 473 # The EXCLUDE tag can be used to specify files and/or directories that should
Chris@719 474 # excluded from the INPUT source files. This way you can easily exclude a
Chris@719 475 # subdirectory from a directory tree whose root is specified with the INPUT tag.
Chris@719 476
Chris@719 477 EXCLUDE =
Chris@719 478
Chris@719 479 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
Chris@719 480 # directories that are symbolic links (a Unix filesystem feature) are excluded
Chris@719 481 # from the input.
Chris@719 482
Chris@719 483 EXCLUDE_SYMLINKS = NO
Chris@719 484
Chris@719 485 # If the value of the INPUT tag contains directories, you can use the
Chris@719 486 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
Chris@719 487 # certain files from those directories. Note that the wildcards are matched
Chris@719 488 # against the file with absolute path, so to exclude all test directories
Chris@719 489 # for example use the pattern */test/*
Chris@719 490
Chris@719 491 EXCLUDE_PATTERNS = qrc_*.cpp \
Chris@719 492 moc_*.cpp \
Chris@719 493 *.moc.cpp \
Chris@719 494 *_skel.cpp
Chris@719 495
Chris@719 496 # The EXAMPLE_PATH tag can be used to specify one or more files or
Chris@719 497 # directories that contain example code fragments that are included (see
Chris@719 498 # the \include command).
Chris@719 499
Chris@719 500 EXAMPLE_PATH =
Chris@719 501
Chris@719 502 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
Chris@719 503 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
Chris@719 504 # and *.h) to filter out the source-files in the directories. If left
Chris@719 505 # blank all files are included.
Chris@719 506
Chris@719 507 EXAMPLE_PATTERNS =
Chris@719 508
Chris@719 509 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
Chris@719 510 # searched for input files to be used with the \include or \dontinclude
Chris@719 511 # commands irrespective of the value of the RECURSIVE tag.
Chris@719 512 # Possible values are YES and NO. If left blank NO is used.
Chris@719 513
Chris@719 514 EXAMPLE_RECURSIVE = NO
Chris@719 515
Chris@719 516 # The IMAGE_PATH tag can be used to specify one or more files or
Chris@719 517 # directories that contain image that are included in the documentation (see
Chris@719 518 # the \image command).
Chris@719 519
Chris@719 520 IMAGE_PATH =
Chris@719 521
Chris@719 522 # The INPUT_FILTER tag can be used to specify a program that doxygen should
Chris@719 523 # invoke to filter for each input file. Doxygen will invoke the filter program
Chris@719 524 # by executing (via popen()) the command <filter> <input-file>, where <filter>
Chris@719 525 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
Chris@719 526 # input file. Doxygen will then use the output that the filter program writes
Chris@719 527 # to standard output. If FILTER_PATTERNS is specified, this tag will be
Chris@719 528 # ignored.
Chris@719 529
Chris@719 530 INPUT_FILTER =
Chris@719 531
Chris@719 532 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
Chris@719 533 # basis. Doxygen will compare the file name with each pattern and apply the
Chris@719 534 # filter if there is a match. The filters are a list of the form:
Chris@719 535 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
Chris@719 536 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
Chris@719 537 # is applied to all files.
Chris@719 538
Chris@719 539 FILTER_PATTERNS =
Chris@719 540
Chris@719 541 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
Chris@719 542 # INPUT_FILTER) will be used to filter the input files when producing source
Chris@719 543 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
Chris@719 544
Chris@719 545 FILTER_SOURCE_FILES = NO
Chris@719 546
Chris@719 547 #---------------------------------------------------------------------------
Chris@719 548 # configuration options related to source browsing
Chris@719 549 #---------------------------------------------------------------------------
Chris@719 550
Chris@719 551 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
Chris@719 552 # be generated. Documented entities will be cross-referenced with these sources.
Chris@719 553 # Note: To get rid of all source code in the generated output, make sure also
Chris@719 554 # VERBATIM_HEADERS is set to NO.
Chris@719 555
Chris@719 556 SOURCE_BROWSER = YES
Chris@719 557
Chris@719 558 # Setting the INLINE_SOURCES tag to YES will include the body
Chris@719 559 # of functions and classes directly in the documentation.
Chris@719 560
Chris@719 561 INLINE_SOURCES = NO
Chris@719 562
Chris@719 563 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
Chris@719 564 # doxygen to hide any special comment blocks from generated source code
Chris@719 565 # fragments. Normal C and C++ comments will always remain visible.
Chris@719 566
Chris@719 567 STRIP_CODE_COMMENTS = YES
Chris@719 568
Chris@719 569 # If the REFERENCED_BY_RELATION tag is set to YES (the default)
Chris@719 570 # then for each documented function all documented
Chris@719 571 # functions referencing it will be listed.
Chris@719 572
Chris@719 573 REFERENCED_BY_RELATION = YES
Chris@719 574
Chris@719 575 # If the REFERENCES_RELATION tag is set to YES (the default)
Chris@719 576 # then for each documented function all documented entities
Chris@719 577 # called/used by that function will be listed.
Chris@719 578
Chris@719 579 REFERENCES_RELATION = YES
Chris@719 580
Chris@719 581 # If the USE_HTAGS tag is set to YES then the references to source code
Chris@719 582 # will point to the HTML generated by the htags(1) tool instead of doxygen
Chris@719 583 # built-in source browser. The htags tool is part of GNU's global source
Chris@719 584 # tagging system (see http://www.gnu.org/software/global/global.html). You
Chris@719 585 # will need version 4.8.6 or higher.
Chris@719 586
Chris@719 587 #USE_HTAGS = NO
Chris@719 588
Chris@719 589 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
Chris@719 590 # will generate a verbatim copy of the header file for each class for
Chris@719 591 # which an include is specified. Set to NO to disable this.
Chris@719 592
Chris@719 593 VERBATIM_HEADERS = YES
Chris@719 594
Chris@719 595 #---------------------------------------------------------------------------
Chris@719 596 # configuration options related to the alphabetical class index
Chris@719 597 #---------------------------------------------------------------------------
Chris@719 598
Chris@719 599 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
Chris@719 600 # of all compounds will be generated. Enable this if the project
Chris@719 601 # contains a lot of classes, structs, unions or interfaces.
Chris@719 602
Chris@719 603 ALPHABETICAL_INDEX = YES
Chris@719 604
Chris@719 605 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
Chris@719 606 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
Chris@719 607 # in which this list will be split (can be a number in the range [1..20])
Chris@719 608
Chris@719 609 COLS_IN_ALPHA_INDEX = 3
Chris@719 610
Chris@719 611 # In case all classes in a project start with a common prefix, all
Chris@719 612 # classes will be put under the same header in the alphabetical index.
Chris@719 613 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
Chris@719 614 # should be ignored while generating the index headers.
Chris@719 615
Chris@719 616 IGNORE_PREFIX =
Chris@719 617
Chris@719 618 #---------------------------------------------------------------------------
Chris@719 619 # configuration options related to the HTML output
Chris@719 620 #---------------------------------------------------------------------------
Chris@719 621
Chris@719 622 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
Chris@719 623 # generate HTML output.
Chris@719 624
Chris@719 625 GENERATE_HTML = YES
Chris@719 626
Chris@719 627 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
Chris@719 628 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
Chris@719 629 # put in front of it. If left blank `html' will be used as the default path.
Chris@719 630
Chris@719 631 HTML_OUTPUT = html
Chris@719 632
Chris@719 633 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
Chris@719 634 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
Chris@719 635 # doxygen will generate files with .html extension.
Chris@719 636
Chris@719 637 HTML_FILE_EXTENSION = .html
Chris@719 638
Chris@719 639 # The HTML_HEADER tag can be used to specify a personal HTML header for
Chris@719 640 # each generated HTML page. If it is left blank doxygen will generate a
Chris@719 641 # standard header.
Chris@719 642
Chris@719 643 HTML_HEADER =
Chris@719 644
Chris@719 645 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
Chris@719 646 # each generated HTML page. If it is left blank doxygen will generate a
Chris@719 647 # standard footer.
Chris@719 648
Chris@719 649 HTML_FOOTER =
Chris@719 650
Chris@719 651 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
Chris@719 652 # style sheet that is used by each HTML page. It can be used to
Chris@719 653 # fine-tune the look of the HTML output. If the tag is left blank doxygen
Chris@719 654 # will generate a default style sheet. Note that doxygen will try to copy
Chris@719 655 # the style sheet file to the HTML output directory, so don't put your own
Chris@719 656 # stylesheet in the HTML output directory as well, or it will be erased!
Chris@719 657
Chris@719 658 HTML_STYLESHEET =
Chris@719 659
Chris@719 660 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
Chris@719 661 # files or namespaces will be aligned in HTML using tables. If set to
Chris@719 662 # NO a bullet list will be used.
Chris@719 663
Chris@719 664 HTML_ALIGN_MEMBERS = YES
Chris@719 665
Chris@719 666 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
Chris@719 667 # will be generated that can be used as input for tools like the
Chris@719 668 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
Chris@719 669 # of the generated HTML documentation.
Chris@719 670
Chris@719 671 GENERATE_HTMLHELP = NO
Chris@719 672
Chris@719 673 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
Chris@719 674 # be used to specify the file name of the resulting .chm file. You
Chris@719 675 # can add a path in front of the file if the result should not be
Chris@719 676 # written to the html output directory.
Chris@719 677
Chris@719 678 CHM_FILE =
Chris@719 679
Chris@719 680 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
Chris@719 681 # be used to specify the location (absolute path including file name) of
Chris@719 682 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
Chris@719 683 # the HTML help compiler on the generated index.hhp.
Chris@719 684
Chris@719 685 HHC_LOCATION =
Chris@719 686
Chris@719 687 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
Chris@719 688 # controls if a separate .chi index file is generated (YES) or that
Chris@719 689 # it should be included in the master .chm file (NO).
Chris@719 690
Chris@719 691 GENERATE_CHI = NO
Chris@719 692
Chris@719 693 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
Chris@719 694 # controls whether a binary table of contents is generated (YES) or a
Chris@719 695 # normal table of contents (NO) in the .chm file.
Chris@719 696
Chris@719 697 BINARY_TOC = NO
Chris@719 698
Chris@719 699 # The TOC_EXPAND flag can be set to YES to add extra items for group members
Chris@719 700 # to the contents of the HTML help documentation and to the tree view.
Chris@719 701
Chris@719 702 TOC_EXPAND = NO
Chris@719 703
Chris@719 704 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
Chris@719 705 # top of each HTML page. The value NO (the default) enables the index and
Chris@719 706 # the value YES disables it.
Chris@719 707
Chris@719 708 DISABLE_INDEX = NO
Chris@719 709
Chris@719 710 # This tag can be used to set the number of enum values (range [1..20])
Chris@719 711 # that doxygen will group on one line in the generated HTML documentation.
Chris@719 712
Chris@719 713 ENUM_VALUES_PER_LINE = 4
Chris@719 714
Chris@719 715 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
Chris@719 716 # generated containing a tree-like index structure (just like the one that
Chris@719 717 # is generated for HTML Help). For this to work a browser that supports
Chris@719 718 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
Chris@719 719 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
Chris@719 720 # probably better off using the HTML help feature.
Chris@719 721
Chris@719 722 GENERATE_TREEVIEW = YES
Chris@719 723
Chris@719 724 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
Chris@719 725 # used to set the initial width (in pixels) of the frame in which the tree
Chris@719 726 # is shown.
Chris@719 727
Chris@719 728 TREEVIEW_WIDTH = 250
Chris@719 729
Chris@719 730 #---------------------------------------------------------------------------
Chris@719 731 # configuration options related to the LaTeX output
Chris@719 732 #---------------------------------------------------------------------------
Chris@719 733
Chris@719 734 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
Chris@719 735 # generate Latex output.
Chris@719 736
Chris@719 737 GENERATE_LATEX = NO
Chris@719 738
Chris@719 739 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
Chris@719 740 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
Chris@719 741 # put in front of it. If left blank `latex' will be used as the default path.
Chris@719 742
Chris@719 743 LATEX_OUTPUT = latex
Chris@719 744
Chris@719 745 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
Chris@719 746 # invoked. If left blank `latex' will be used as the default command name.
Chris@719 747
Chris@719 748 LATEX_CMD_NAME = latex
Chris@719 749
Chris@719 750 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
Chris@719 751 # generate index for LaTeX. If left blank `makeindex' will be used as the
Chris@719 752 # default command name.
Chris@719 753
Chris@719 754 MAKEINDEX_CMD_NAME = makeindex
Chris@719 755
Chris@719 756 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
Chris@719 757 # LaTeX documents. This may be useful for small projects and may help to
Chris@719 758 # save some trees in general.
Chris@719 759
Chris@719 760 COMPACT_LATEX = NO
Chris@719 761
Chris@719 762 # The PAPER_TYPE tag can be used to set the paper type that is used
Chris@719 763 # by the printer. Possible values are: a4, a4wide, letter, legal and
Chris@719 764 # executive. If left blank a4wide will be used.
Chris@719 765
Chris@719 766 PAPER_TYPE = a4wide
Chris@719 767
Chris@719 768 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
Chris@719 769 # packages that should be included in the LaTeX output.
Chris@719 770
Chris@719 771 EXTRA_PACKAGES =
Chris@719 772
Chris@719 773 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
Chris@719 774 # the generated latex document. The header should contain everything until
Chris@719 775 # the first chapter. If it is left blank doxygen will generate a
Chris@719 776 # standard header. Notice: only use this tag if you know what you are doing!
Chris@719 777
Chris@719 778 LATEX_HEADER =
Chris@719 779
Chris@719 780 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
Chris@719 781 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
Chris@719 782 # contain links (just like the HTML output) instead of page references
Chris@719 783 # This makes the output suitable for online browsing using a pdf viewer.
Chris@719 784
Chris@719 785 PDF_HYPERLINKS = NO
Chris@719 786
Chris@719 787 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
Chris@719 788 # plain latex in the generated Makefile. Set this option to YES to get a
Chris@719 789 # higher quality PDF documentation.
Chris@719 790
Chris@719 791 USE_PDFLATEX = NO
Chris@719 792
Chris@719 793 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
Chris@719 794 # command to the generated LaTeX files. This will instruct LaTeX to keep
Chris@719 795 # running if errors occur, instead of asking the user for help.
Chris@719 796 # This option is also used when generating formulas in HTML.
Chris@719 797
Chris@719 798 LATEX_BATCHMODE = NO
Chris@719 799
Chris@719 800 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
Chris@719 801 # include the index chapters (such as File Index, Compound Index, etc.)
Chris@719 802 # in the output.
Chris@719 803
Chris@719 804 LATEX_HIDE_INDICES = NO
Chris@719 805
Chris@719 806 #---------------------------------------------------------------------------
Chris@719 807 # configuration options related to the RTF output
Chris@719 808 #---------------------------------------------------------------------------
Chris@719 809
Chris@719 810 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
Chris@719 811 # The RTF output is optimized for Word 97 and may not look very pretty with
Chris@719 812 # other RTF readers or editors.
Chris@719 813
Chris@719 814 GENERATE_RTF = NO
Chris@719 815
Chris@719 816 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
Chris@719 817 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
Chris@719 818 # put in front of it. If left blank `rtf' will be used as the default path.
Chris@719 819
Chris@719 820 RTF_OUTPUT = rtf
Chris@719 821
Chris@719 822 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
Chris@719 823 # RTF documents. This may be useful for small projects and may help to
Chris@719 824 # save some trees in general.
Chris@719 825
Chris@719 826 COMPACT_RTF = NO
Chris@719 827
Chris@719 828 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
Chris@719 829 # will contain hyperlink fields. The RTF file will
Chris@719 830 # contain links (just like the HTML output) instead of page references.
Chris@719 831 # This makes the output suitable for online browsing using WORD or other
Chris@719 832 # programs which support those fields.
Chris@719 833 # Note: wordpad (write) and others do not support links.
Chris@719 834
Chris@719 835 RTF_HYPERLINKS = NO
Chris@719 836
Chris@719 837 # Load stylesheet definitions from file. Syntax is similar to doxygen's
Chris@719 838 # config file, i.e. a series of assignments. You only have to provide
Chris@719 839 # replacements, missing definitions are set to their default value.
Chris@719 840
Chris@719 841 RTF_STYLESHEET_FILE =
Chris@719 842
Chris@719 843 # Set optional variables used in the generation of an rtf document.
Chris@719 844 # Syntax is similar to doxygen's config file.
Chris@719 845
Chris@719 846 RTF_EXTENSIONS_FILE =
Chris@719 847
Chris@719 848 #---------------------------------------------------------------------------
Chris@719 849 # configuration options related to the man page output
Chris@719 850 #---------------------------------------------------------------------------
Chris@719 851
Chris@719 852 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
Chris@719 853 # generate man pages
Chris@719 854
Chris@719 855 GENERATE_MAN = NO
Chris@719 856
Chris@719 857 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
Chris@719 858 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
Chris@719 859 # put in front of it. If left blank `man' will be used as the default path.
Chris@719 860
Chris@719 861 MAN_OUTPUT = man
Chris@719 862
Chris@719 863 # The MAN_EXTENSION tag determines the extension that is added to
Chris@719 864 # the generated man pages (default is the subroutine's section .3)
Chris@719 865
Chris@719 866 MAN_EXTENSION = .3
Chris@719 867
Chris@719 868 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
Chris@719 869 # then it will generate one additional man file for each entity
Chris@719 870 # documented in the real man page(s). These additional files
Chris@719 871 # only source the real man page, but without them the man command
Chris@719 872 # would be unable to find the correct page. The default is NO.
Chris@719 873
Chris@719 874 MAN_LINKS = NO
Chris@719 875
Chris@719 876 #---------------------------------------------------------------------------
Chris@719 877 # configuration options related to the XML output
Chris@719 878 #---------------------------------------------------------------------------
Chris@719 879
Chris@719 880 # If the GENERATE_XML tag is set to YES Doxygen will
Chris@719 881 # generate an XML file that captures the structure of
Chris@719 882 # the code including all documentation.
Chris@719 883
Chris@719 884 GENERATE_XML = NO
Chris@719 885
Chris@719 886 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
Chris@719 887 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
Chris@719 888 # put in front of it. If left blank `xml' will be used as the default path.
Chris@719 889
Chris@719 890 XML_OUTPUT = xml
Chris@719 891
Chris@719 892 # The XML_SCHEMA tag can be used to specify an XML schema,
Chris@719 893 # which can be used by a validating XML parser to check the
Chris@719 894 # syntax of the XML files.
Chris@719 895
Chris@719 896 XML_SCHEMA =
Chris@719 897
Chris@719 898 # The XML_DTD tag can be used to specify an XML DTD,
Chris@719 899 # which can be used by a validating XML parser to check the
Chris@719 900 # syntax of the XML files.
Chris@719 901
Chris@719 902 XML_DTD =
Chris@719 903
Chris@719 904 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
Chris@719 905 # dump the program listings (including syntax highlighting
Chris@719 906 # and cross-referencing information) to the XML output. Note that
Chris@719 907 # enabling this will significantly increase the size of the XML output.
Chris@719 908
Chris@719 909 XML_PROGRAMLISTING = YES
Chris@719 910
Chris@719 911 #---------------------------------------------------------------------------
Chris@719 912 # configuration options for the AutoGen Definitions output
Chris@719 913 #---------------------------------------------------------------------------
Chris@719 914
Chris@719 915 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
Chris@719 916 # generate an AutoGen Definitions (see autogen.sf.net) file
Chris@719 917 # that captures the structure of the code including all
Chris@719 918 # documentation. Note that this feature is still experimental
Chris@719 919 # and incomplete at the moment.
Chris@719 920
Chris@719 921 GENERATE_AUTOGEN_DEF = NO
Chris@719 922
Chris@719 923 #---------------------------------------------------------------------------
Chris@719 924 # configuration options related to the Perl module output
Chris@719 925 #---------------------------------------------------------------------------
Chris@719 926
Chris@719 927 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
Chris@719 928 # generate a Perl module file that captures the structure of
Chris@719 929 # the code including all documentation. Note that this
Chris@719 930 # feature is still experimental and incomplete at the
Chris@719 931 # moment.
Chris@719 932
Chris@719 933 GENERATE_PERLMOD = NO
Chris@719 934
Chris@719 935 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
Chris@719 936 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
Chris@719 937 # to generate PDF and DVI output from the Perl module output.
Chris@719 938
Chris@719 939 PERLMOD_LATEX = NO
Chris@719 940
Chris@719 941 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
Chris@719 942 # nicely formatted so it can be parsed by a human reader. This is useful
Chris@719 943 # if you want to understand what is going on. On the other hand, if this
Chris@719 944 # tag is set to NO the size of the Perl module output will be much smaller
Chris@719 945 # and Perl will parse it just the same.
Chris@719 946
Chris@719 947 PERLMOD_PRETTY = YES
Chris@719 948
Chris@719 949 # The names of the make variables in the generated doxyrules.make file
Chris@719 950 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
Chris@719 951 # This is useful so different doxyrules.make files included by the same
Chris@719 952 # Makefile don't overwrite each other's variables.
Chris@719 953
Chris@719 954 PERLMOD_MAKEVAR_PREFIX =
Chris@719 955
Chris@719 956 #---------------------------------------------------------------------------
Chris@719 957 # Configuration options related to the preprocessor
Chris@719 958 #---------------------------------------------------------------------------
Chris@719 959
Chris@719 960 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
Chris@719 961 # evaluate all C-preprocessor directives found in the sources and include
Chris@719 962 # files.
Chris@719 963
Chris@719 964 ENABLE_PREPROCESSING = YES
Chris@719 965
Chris@719 966 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
Chris@719 967 # names in the source code. If set to NO (the default) only conditional
Chris@719 968 # compilation will be performed. Macro expansion can be done in a controlled
Chris@719 969 # way by setting EXPAND_ONLY_PREDEF to YES.
Chris@719 970
Chris@719 971 MACRO_EXPANSION = NO
Chris@719 972
Chris@719 973 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
Chris@719 974 # then the macro expansion is limited to the macros specified with the
Chris@719 975 # PREDEFINED and EXPAND_AS_PREDEFINED tags.
Chris@719 976
Chris@719 977 EXPAND_ONLY_PREDEF = NO
Chris@719 978
Chris@719 979 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
Chris@719 980 # in the INCLUDE_PATH (see below) will be search if a #include is found.
Chris@719 981
Chris@719 982 SEARCH_INCLUDES = YES
Chris@719 983
Chris@719 984 # The INCLUDE_PATH tag can be used to specify one or more directories that
Chris@719 985 # contain include files that are not input files but should be processed by
Chris@719 986 # the preprocessor.
Chris@719 987
Chris@721 988 INCLUDE_PATH =
Chris@719 989
Chris@719 990 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
Chris@719 991 # patterns (like *.h and *.hpp) to filter out the header-files in the
Chris@719 992 # directories. If left blank, the patterns specified with FILE_PATTERNS will
Chris@719 993 # be used.
Chris@719 994
Chris@719 995 INCLUDE_FILE_PATTERNS = Q* *.h
Chris@719 996
Chris@719 997 # The PREDEFINED tag can be used to specify one or more macro names that
Chris@719 998 # are defined before the preprocessor is started (similar to the -D option of
Chris@719 999 # gcc). The argument of the tag is a list of macros of the form: name
Chris@719 1000 # or name=definition (no spaces). If the definition and the = are
Chris@719 1001 # omitted =1 is assumed. To prevent a macro definition from being
Chris@719 1002 # undefined via #undef or recursively expanded use the := operator
Chris@719 1003 # instead of the = operator.
Chris@719 1004
Chris@719 1005 PREDEFINED = HAVE_FFTW3F HAVE_FISHSOUND HAVE_JACK HAVE_LIBLO HAVE_LRDF HAVE_MAD HAVE_OGGZ HAVE_PORTAUDIO HAVE_SAMPLERATE HAVE_SNDFILE HAVE_VAMP
Chris@719 1006
Chris@719 1007 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
Chris@719 1008 # this tag can be used to specify a list of macro names that should be expanded.
Chris@719 1009 # The macro definition that is found in the sources will be used.
Chris@719 1010 # Use the PREDEFINED tag if you want to use a different macro definition.
Chris@719 1011
Chris@719 1012 EXPAND_AS_DEFINED =
Chris@719 1013
Chris@719 1014 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
Chris@719 1015 # doxygen's preprocessor will remove all function-like macros that are alone
Chris@719 1016 # on a line, have an all uppercase name, and do not end with a semicolon. Such
Chris@719 1017 # function macros are typically used for boiler-plate code, and will confuse
Chris@719 1018 # the parser if not removed.
Chris@719 1019
Chris@719 1020 SKIP_FUNCTION_MACROS = YES
Chris@719 1021
Chris@719 1022 #---------------------------------------------------------------------------
Chris@719 1023 # Configuration::additions related to external references
Chris@719 1024 #---------------------------------------------------------------------------
Chris@719 1025
Chris@719 1026 # The TAGFILES option can be used to specify one or more tagfiles.
Chris@719 1027 # Optionally an initial location of the external documentation
Chris@719 1028 # can be added for each tagfile. The format of a tag file without
Chris@719 1029 # this location is as follows:
Chris@719 1030 # TAGFILES = file1 file2 ...
Chris@719 1031 # Adding location for the tag files is done as follows:
Chris@719 1032 # TAGFILES = file1=loc1 "file2 = loc2" ...
Chris@719 1033 # where "loc1" and "loc2" can be relative or absolute paths or
Chris@719 1034 # URLs. If a location is present for each tag, the installdox tool
Chris@719 1035 # does not have to be run to correct the links.
Chris@719 1036 # Note that each tag file must have a unique name
Chris@719 1037 # (where the name does NOT include the path)
Chris@719 1038 # If a tag file is not located in the directory in which doxygen
Chris@719 1039 # is run, you must also specify the path to the tagfile here.
Chris@719 1040
Chris@719 1041 TAGFILES =
Chris@719 1042
Chris@719 1043 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
Chris@719 1044 # a tag file that is based on the input files it reads.
Chris@719 1045
Chris@719 1046 GENERATE_TAGFILE =
Chris@719 1047
Chris@719 1048 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
Chris@719 1049 # in the class index. If set to NO only the inherited external classes
Chris@719 1050 # will be listed.
Chris@719 1051
Chris@719 1052 ALLEXTERNALS = NO
Chris@719 1053
Chris@719 1054 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
Chris@719 1055 # in the modules index. If set to NO, only the current project's groups will
Chris@719 1056 # be listed.
Chris@719 1057
Chris@719 1058 EXTERNAL_GROUPS = YES
Chris@719 1059
Chris@719 1060 # The PERL_PATH should be the absolute path and name of the perl script
Chris@719 1061 # interpreter (i.e. the result of `which perl').
Chris@719 1062
Chris@719 1063 PERL_PATH = /usr/bin/perl
Chris@719 1064
Chris@719 1065 #---------------------------------------------------------------------------
Chris@719 1066 # Configuration options related to the dot tool
Chris@719 1067 #---------------------------------------------------------------------------
Chris@719 1068
Chris@719 1069 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
Chris@719 1070 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
Chris@719 1071 # or super classes. Setting the tag to NO turns the diagrams off. Note that
Chris@719 1072 # this option is superseded by the HAVE_DOT option below. This is only a
Chris@719 1073 # fallback. It is recommended to install and use dot, since it yields more
Chris@719 1074 # powerful graphs.
Chris@719 1075
Chris@719 1076 CLASS_DIAGRAMS = NO
Chris@719 1077
Chris@719 1078 # If set to YES, the inheritance and collaboration graphs will hide
Chris@719 1079 # inheritance and usage relations if the target is undocumented
Chris@719 1080 # or is not a class.
Chris@719 1081
Chris@719 1082 HIDE_UNDOC_RELATIONS = YES
Chris@719 1083
Chris@719 1084 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
Chris@719 1085 # available from the path. This tool is part of Graphviz, a graph visualization
Chris@719 1086 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
Chris@719 1087 # have no effect if this option is set to NO (the default)
Chris@719 1088
Chris@719 1089 HAVE_DOT = YES
Chris@719 1090
Chris@719 1091 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
Chris@719 1092 # will generate a graph for each documented class showing the direct and
Chris@719 1093 # indirect inheritance relations. Setting this tag to YES will force the
Chris@719 1094 # the CLASS_DIAGRAMS tag to NO.
Chris@719 1095
Chris@719 1096 CLASS_GRAPH = YES
Chris@719 1097
Chris@719 1098 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
Chris@719 1099 # will generate a graph for each documented class showing the direct and
Chris@719 1100 # indirect implementation dependencies (inheritance, containment, and
Chris@719 1101 # class references variables) of the class with other documented classes.
Chris@719 1102
Chris@719 1103 COLLABORATION_GRAPH = YES
Chris@719 1104
Chris@719 1105 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
Chris@719 1106 # will generate a graph for groups, showing the direct groups dependencies
Chris@719 1107
Chris@719 1108 GROUP_GRAPHS = YES
Chris@719 1109
Chris@719 1110 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
Chris@719 1111 # collaboration diagrams in a style similar to the OMG's Unified Modeling
Chris@719 1112 # Language.
Chris@719 1113
Chris@719 1114 UML_LOOK = NO
Chris@719 1115
Chris@719 1116 # If set to YES, the inheritance and collaboration graphs will show the
Chris@719 1117 # relations between templates and their instances.
Chris@719 1118
Chris@719 1119 TEMPLATE_RELATIONS = NO
Chris@719 1120
Chris@719 1121 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
Chris@719 1122 # tags are set to YES then doxygen will generate a graph for each documented
Chris@719 1123 # file showing the direct and indirect include dependencies of the file with
Chris@719 1124 # other documented files.
Chris@719 1125
Chris@719 1126 INCLUDE_GRAPH = YES
Chris@719 1127
Chris@719 1128 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
Chris@719 1129 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
Chris@719 1130 # documented header file showing the documented files that directly or
Chris@719 1131 # indirectly include this file.
Chris@719 1132
Chris@719 1133 INCLUDED_BY_GRAPH = YES
Chris@719 1134
Chris@719 1135 # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
Chris@719 1136 # generate a call dependency graph for every global function or class method.
Chris@719 1137 # Note that enabling this option will significantly increase the time of a run.
Chris@719 1138 # So in most cases it will be better to enable call graphs for selected
Chris@719 1139 # functions only using the \callgraph command.
Chris@719 1140
Chris@719 1141 CALL_GRAPH = NO
Chris@719 1142
Chris@719 1143 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
Chris@719 1144 # will graphical hierarchy of all classes instead of a textual one.
Chris@719 1145
Chris@719 1146 GRAPHICAL_HIERARCHY = YES
Chris@719 1147
Chris@719 1148 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
Chris@719 1149 # then doxygen will show the dependencies a directory has on other directories
Chris@719 1150 # in a graphical way. The dependency relations are determined by the #include
Chris@719 1151 # relations between the files in the directories.
Chris@719 1152
Chris@719 1153 DIRECTORY_GRAPH = YES
Chris@719 1154
Chris@719 1155 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
Chris@719 1156 # generated by dot. Possible values are png, jpg, or gif
Chris@719 1157 # If left blank png will be used.
Chris@719 1158
Chris@719 1159 DOT_IMAGE_FORMAT = png
Chris@719 1160
Chris@719 1161 # The tag DOT_PATH can be used to specify the path where the dot tool can be
Chris@719 1162 # found. If left blank, it is assumed the dot tool can be found in the path.
Chris@719 1163
Chris@719 1164 DOT_PATH =
Chris@719 1165
Chris@719 1166 # The DOTFILE_DIRS tag can be used to specify one or more directories that
Chris@719 1167 # contain dot files that are included in the documentation (see the
Chris@719 1168 # \dotfile command).
Chris@719 1169
Chris@719 1170 DOTFILE_DIRS =
Chris@719 1171
Chris@719 1172 # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
Chris@719 1173 # (in pixels) of the graphs generated by dot. If a graph becomes larger than
Chris@719 1174 # this value, doxygen will try to truncate the graph, so that it fits within
Chris@719 1175 # the specified constraint. Beware that most browsers cannot cope with very
Chris@719 1176 # large images.
Chris@719 1177
Chris@719 1178 MAX_DOT_GRAPH_WIDTH = 1024
Chris@719 1179
Chris@719 1180 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
Chris@719 1181 # (in pixels) of the graphs generated by dot. If a graph becomes larger than
Chris@719 1182 # this value, doxygen will try to truncate the graph, so that it fits within
Chris@719 1183 # the specified constraint. Beware that most browsers cannot cope with very
Chris@719 1184 # large images.
Chris@719 1185
Chris@719 1186 MAX_DOT_GRAPH_HEIGHT = 1024
Chris@719 1187
Chris@719 1188 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
Chris@719 1189 # graphs generated by dot. A depth value of 3 means that only nodes reachable
Chris@719 1190 # from the root by following a path via at most 3 edges will be shown. Nodes
Chris@719 1191 # that lay further from the root node will be omitted. Note that setting this
Chris@719 1192 # option to 1 or 2 may greatly reduce the computation time needed for large
Chris@719 1193 # code bases. Also note that a graph may be further truncated if the graph's
Chris@719 1194 # image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
Chris@719 1195 # and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
Chris@719 1196 # the graph is not depth-constrained.
Chris@719 1197
Chris@719 1198 MAX_DOT_GRAPH_DEPTH = 0
Chris@719 1199
Chris@719 1200 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
Chris@719 1201 # background. This is disabled by default, which results in a white background.
Chris@719 1202 # Warning: Depending on the platform used, enabling this option may lead to
Chris@719 1203 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
Chris@719 1204 # read).
Chris@719 1205
Chris@719 1206 DOT_TRANSPARENT = NO
Chris@719 1207
Chris@719 1208 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
Chris@719 1209 # files in one run (i.e. multiple -o and -T options on the command line). This
Chris@719 1210 # makes dot run faster, but since only newer versions of dot (>1.8.10)
Chris@719 1211 # support this, this feature is disabled by default.
Chris@719 1212
Chris@719 1213 DOT_MULTI_TARGETS = YES
Chris@719 1214
Chris@719 1215 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
Chris@719 1216 # generate a legend page explaining the meaning of the various boxes and
Chris@719 1217 # arrows in the dot generated graphs.
Chris@719 1218
Chris@719 1219 GENERATE_LEGEND = YES
Chris@719 1220
Chris@719 1221 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
Chris@719 1222 # remove the intermediate dot files that are used to generate
Chris@719 1223 # the various graphs.
Chris@719 1224
Chris@719 1225 DOT_CLEANUP = YES
Chris@719 1226
Chris@719 1227 #---------------------------------------------------------------------------
Chris@719 1228 # Configuration::additions related to the search engine
Chris@719 1229 #---------------------------------------------------------------------------
Chris@719 1230
Chris@719 1231 # The SEARCHENGINE tag specifies whether or not a search engine should be
Chris@719 1232 # used. If set to NO the values of all tags below this one will be ignored.
Chris@719 1233
Chris@719 1234 SEARCHENGINE = NO