annotate data/fft/FFTMemoryCache.h @ 448:2fb0061c5d23

nothing much!
author Chris Cannam
date Fri, 03 Oct 2008 15:43:15 +0000
parents 115f60df1e4d
children 6066bde1c126
rev   line source
Chris@159 1 /* -*- c-basic-offset: 4 indent-tabs-mode: nil -*- vi:set ts=8 sts=4 sw=4: */
Chris@159 2
Chris@159 3 /*
Chris@159 4 Sonic Visualiser
Chris@159 5 An audio file viewer and annotation editor.
Chris@159 6 Centre for Digital Music, Queen Mary, University of London.
Chris@159 7 This file copyright 2006 Chris Cannam.
Chris@159 8
Chris@159 9 This program is free software; you can redistribute it and/or
Chris@159 10 modify it under the terms of the GNU General Public License as
Chris@159 11 published by the Free Software Foundation; either version 2 of the
Chris@159 12 License, or (at your option) any later version. See the file
Chris@159 13 COPYING included with this distribution for more information.
Chris@159 14 */
Chris@159 15
Chris@159 16 #ifndef _FFT_MEMORY_CACHE_H_
Chris@159 17 #define _FFT_MEMORY_CACHE_H_
Chris@159 18
Chris@159 19 #include "FFTCache.h"
Chris@159 20
Chris@159 21 #include "base/ResizeableBitset.h"
Chris@408 22 #include "base/Profiler.h"
Chris@159 23
Chris@159 24 /**
Chris@253 25 * In-memory FFT cache. For this we want to cache magnitude with
Chris@159 26 * enough resolution to have gain applied afterwards and determine
Chris@159 27 * whether something is a peak or not, and also cache phase rather
Chris@159 28 * than only phase-adjusted frequency so that we don't have to
Chris@159 29 * recalculate if switching between phase and magnitude displays. At
Chris@159 30 * the same time, we don't want to take up too much memory. It's not
Chris@159 31 * expected to be accurate enough to be used as input for DSP or
Chris@159 32 * resynthesis code.
Chris@159 33 *
Chris@159 34 * This implies probably 16 bits for a normalized magnitude and at
Chris@159 35 * most 16 bits for phase.
Chris@159 36 *
Chris@159 37 * Each column's magnitudes are expected to be stored normalized
Chris@159 38 * to [0,1] with respect to the column, so the normalization
Chris@159 39 * factor should be calculated before all values in a column, and
Chris@159 40 * set appropriately.
Chris@159 41 */
Chris@159 42
Chris@159 43 class FFTMemoryCache : public FFTCache
Chris@159 44 {
Chris@159 45 public:
Chris@264 46 FFTMemoryCache(StorageType storageType); // of size zero, call resize() before using
Chris@159 47 virtual ~FFTMemoryCache();
Chris@159 48
Chris@159 49 virtual size_t getWidth() const { return m_width; }
Chris@159 50 virtual size_t getHeight() const { return m_height; }
Chris@159 51
Chris@159 52 virtual void resize(size_t width, size_t height);
Chris@159 53 virtual void reset(); // zero-fill or 1-fill as appropriate without changing size
Chris@159 54
Chris@159 55 virtual float getMagnitudeAt(size_t x, size_t y) const {
Chris@334 56 if (m_storageType == Rectangular) {
Chris@408 57 Profiler profiler("FFTMemoryCache::getMagnitudeAt: cart to polar");
Chris@334 58 return sqrt(m_freal[x][y] * m_freal[x][y] +
Chris@334 59 m_fimag[x][y] * m_fimag[x][y]);
Chris@334 60 } else {
Chris@334 61 return getNormalizedMagnitudeAt(x, y) * m_factor[x];
Chris@334 62 }
Chris@159 63 }
Chris@159 64
Chris@159 65 virtual float getNormalizedMagnitudeAt(size_t x, size_t y) const {
Chris@334 66 if (m_storageType == Rectangular) return getMagnitudeAt(x, y) / m_factor[x];
Chris@334 67 else if (m_storageType == Polar) return m_fmagnitude[x][y];
Chris@264 68 else return float(m_magnitude[x][y]) / 65535.0;
Chris@159 69 }
Chris@159 70
Chris@159 71 virtual float getMaximumMagnitudeAt(size_t x) const {
Chris@159 72 return m_factor[x];
Chris@159 73 }
Chris@159 74
Chris@159 75 virtual float getPhaseAt(size_t x, size_t y) const {
Chris@334 76 if (m_storageType == Rectangular) {
Chris@408 77 Profiler profiler("FFTMemoryCache::getValuesAt: cart to polar");
Chris@334 78 return atan2f(m_fimag[x][y], m_freal[x][y]);
Chris@334 79 } else if (m_storageType == Polar) {
Chris@334 80 return m_fphase[x][y];
Chris@334 81 } else {
Chris@334 82 int16_t i = (int16_t)m_phase[x][y];
Chris@334 83 return (float(i) / 32767.0) * M_PI;
Chris@334 84 }
Chris@159 85 }
Chris@159 86
Chris@159 87 virtual void getValuesAt(size_t x, size_t y, float &real, float &imag) const {
Chris@334 88 if (m_storageType == Rectangular) {
Chris@334 89 real = m_freal[x][y];
Chris@334 90 imag = m_fimag[x][y];
Chris@334 91 } else {
Chris@408 92 Profiler profiler("FFTMemoryCache::getValuesAt: polar to cart");
Chris@334 93 float mag = getMagnitudeAt(x, y);
Chris@334 94 float phase = getPhaseAt(x, y);
Chris@334 95 real = mag * cosf(phase);
Chris@334 96 imag = mag * sinf(phase);
Chris@334 97 }
Chris@159 98 }
Chris@159 99
Chris@334 100 virtual bool haveSetColumnAt(size_t x) const {
Chris@334 101 return m_colset.get(x);
Chris@334 102 }
Chris@334 103
Chris@334 104 virtual void setColumnAt(size_t x, float *mags, float *phases, float factor);
Chris@334 105
Chris@334 106 virtual void setColumnAt(size_t x, float *reals, float *imags);
Chris@334 107
Chris@334 108 static size_t getCacheSize(size_t width, size_t height, StorageType type);
Chris@334 109
Chris@408 110 virtual StorageType getStorageType() { return m_storageType; }
Chris@359 111 virtual Type getType() { return MemoryCache; }
Chris@359 112
Chris@334 113 private:
Chris@334 114 size_t m_width;
Chris@334 115 size_t m_height;
Chris@334 116 uint16_t **m_magnitude;
Chris@334 117 uint16_t **m_phase;
Chris@334 118 float **m_fmagnitude;
Chris@334 119 float **m_fphase;
Chris@334 120 float **m_freal;
Chris@334 121 float **m_fimag;
Chris@334 122 float *m_factor;
Chris@334 123 StorageType m_storageType;
Chris@334 124 ResizeableBitset m_colset;
Chris@334 125
Chris@159 126 virtual void setNormalizationFactor(size_t x, float factor) {
Chris@159 127 if (x < m_width) m_factor[x] = factor;
Chris@159 128 }
Chris@159 129
Chris@159 130 virtual void setMagnitudeAt(size_t x, size_t y, float mag) {
Chris@159 131 // norm factor must already be set
Chris@159 132 setNormalizedMagnitudeAt(x, y, mag / m_factor[x]);
Chris@159 133 }
Chris@159 134
Chris@159 135 virtual void setNormalizedMagnitudeAt(size_t x, size_t y, float norm) {
Chris@159 136 if (x < m_width && y < m_height) {
Chris@264 137 if (m_storageType == Polar) m_fmagnitude[x][y] = norm;
Chris@264 138 else m_magnitude[x][y] = uint16_t(norm * 65535.0);
Chris@159 139 }
Chris@159 140 }
Chris@159 141
Chris@159 142 virtual void setPhaseAt(size_t x, size_t y, float phase) {
Chris@159 143 // phase in range -pi -> pi
Chris@159 144 if (x < m_width && y < m_height) {
Chris@264 145 if (m_storageType == Polar) m_fphase[x][y] = phase;
Chris@264 146 else m_phase[x][y] = uint16_t(int16_t((phase * 32767) / M_PI));
Chris@159 147 }
Chris@159 148 }
Chris@159 149
Chris@159 150 void resize(uint16_t **&, size_t, size_t);
Chris@264 151 void resize(float **&, size_t, size_t);
Chris@159 152 };
Chris@159 153
Chris@159 154
Chris@159 155 #endif
Chris@159 156