| Thu, 31 Oct 2019 11:28:35 +0000 |
Chris Cannam |
Avoid deadlock when process finishes immediately (so alignmentProgramFinished is called from waitForStarted while mutex already held)
|
| Tue, 29 Oct 2019 15:59:42 +0000 |
Chris Cannam |
More debug output, and fix crash after failed external-program alignment
|
| Tue, 29 Oct 2019 12:47:44 +0000 |
Chris Cannam |
If no local filename (e.g. when decoded to memory), get the local filename from the file source (e.g. cached version of encoded file)
|
| Thu, 17 Oct 2019 11:13:11 +0100 |
Chris Cannam |
Use updated snap api
|
| Wed, 16 Oct 2019 15:26:59 +0100 |
Chris Cannam |
Make it possible to open an audio device for playback and upgrade it to I/O later on - avoiding the Mac microphone-permission dialog until we are actually wanting to record
|
| Fri, 11 Oct 2019 13:40:54 +0100 |
Chris Cannam |
Avoid floating-point exception when stopping after models deleted
|
| Fri, 04 Oct 2019 13:52:48 +0100 |
Chris Cannam |
Support updated PaneStack options API
|
| Fri, 04 Oct 2019 13:52:27 +0100 |
Chris Cannam |
Fix compile error with new Qt
|
| Wed, 25 Sep 2019 09:52:30 +0100 |
Chris Cannam |
Rename time-frequency box to plain box - but also reload sessions if they have the "old" name (even though it was only used in 4.0-pre1 exports)
|
| Fri, 20 Sep 2019 14:19:49 +0100 |
Chris Cannam |
Add support for time-frequency box layer
|
| Mon, 16 Sep 2019 13:28:40 +0100 |
Chris Cannam |
Fix to avoid ffwd/rwd getting stuck at a single point if it translates to the playback frame again on alignment
|
| Tue, 10 Sep 2019 16:36:01 +0100 |
Chris Cannam |
Use updated EditableDenseThreeDimensionalModel interface
|
| Thu, 29 Aug 2019 14:48:05 +0100 |
Chris Cannam |
Settle on what seem like reliable parameters
|
| Fri, 16 Aug 2019 10:56:09 +0100 |
Chris Cannam |
Send debug output to log
|
| Thu, 15 Aug 2019 18:18:46 +0100 |
Chris Cannam |
Record relative pitch in alignment model for display
|
| Thu, 15 Aug 2019 16:27:47 +0100 |
Chris Cannam |
Experimental version using TIPIC features. Not working well - needs review
tipic
|
| Wed, 14 Aug 2019 13:55:12 +0100 |
Chris Cannam |
Abandon ongoing alignment if asked to re-align before it has completed
|
| Thu, 08 Aug 2019 13:34:12 +0100 |
Chris Cannam |
Some messing with parameters
|
| Fri, 02 Aug 2019 16:50:20 +0100 |
Chris Cannam |
Use layer->getSourceModel
|
| Thu, 01 Aug 2019 15:21:13 +0100 |
Chris Cannam |
Some parameters that may improve alignment
|
| Thu, 01 Aug 2019 13:48:23 +0100 |
Chris Cannam |
Debug tidy
|
| Thu, 18 Jul 2019 14:12:00 +0100 |
Chris Cannam |
Restore/reimplement cancelAsyncLayerCreation - I had forgotten Tony uses it
|
| Wed, 17 Jul 2019 14:25:41 +0100 |
Chris Cannam |
Merge from branch by-id
|
| Wed, 17 Jul 2019 14:15:03 +0100 |
Chris Cannam |
Tidy-up
by-id
|
| Wed, 17 Jul 2019 14:00:59 +0100 |
Chris Cannam |
Fix up labelling commands
by-id
|
| Wed, 17 Jul 2019 13:28:37 +0100 |
Chris Cannam |
Tidy
by-id
|
| Wed, 17 Jul 2019 11:20:24 +0100 |
Chris Cannam |
Debug
by-id
|
| Fri, 12 Jul 2019 13:58:02 +0100 |
Chris Cannam |
Work on management of alignment-related models
by-id
|
| Fri, 12 Jul 2019 09:40:56 +0100 |
Chris Cannam |
Re-implement Document::releaseModel
by-id
|
| Sun, 07 Jul 2019 16:43:16 +0100 |
Chris Cannam |
Remove obsolete definition!
by-id
|
| Fri, 05 Jul 2019 17:53:35 +0100 |
Chris Cannam |
Remove obsolete declaration
by-id
|
| Fri, 05 Jul 2019 15:35:11 +0100 |
Chris Cannam |
Update for removal of (public) getId from Model
by-id
|
| Thu, 04 Jul 2019 18:04:59 +0100 |
Chris Cannam |
Update for changes to PlayParameters
by-id
|
| Thu, 04 Jul 2019 14:31:22 +0100 |
Chris Cannam |
Overhaul SV file reader etc
by-id
|
| Wed, 03 Jul 2019 14:21:05 +0100 |
Chris Cannam |
ModelId updates
by-id
|
| Wed, 03 Jul 2019 13:01:26 +0100 |
Chris Cannam |
Toward updating Document for ModelById
by-id
|
| Tue, 02 Jul 2019 21:10:25 +0100 |
Chris Cannam |
Overhaul audio generator for ModelById
by-id
|
| Mon, 24 Jun 2019 16:14:12 +0100 |
Chris Cannam |
Update for ModelById
by-id
|
| Fri, 14 Jun 2019 17:19:37 +0100 |
Chris Cannam |
Reset source sample rate when last model removed
|
| Thu, 13 Jun 2019 20:36:10 +0100 |
Chris Cannam |
Defer alignment for recorded audio until recording is complete
|
| Thu, 13 Jun 2019 11:32:59 +0100 |
Chris Cannam |
Switch off fine-tuning for alignment, it shouldn't be necessary (I think?) and is quite a bit slower
|
| Tue, 11 Jun 2019 13:39:50 +0100 |
Chris Cannam |
Abandon aggregate models on deletion (e.g. when document is replaced during processing)
|
| Tue, 11 Jun 2019 13:39:17 +0100 |
Chris Cannam |
Ensure that AggregateModels are actually deleted on release despite not being in model list (ugh, this is ugly)
|
| Wed, 22 May 2019 15:41:29 +0100 |
Chris Cannam |
Branch
3.3-stable
|
| Fri, 17 May 2019 13:49:25 +0100 |
Chris Cannam |
Remove some debug
|
| Fri, 17 May 2019 09:46:22 +0100 |
Chris Cannam |
Merge from branch tuning-difference
|
| Fri, 17 May 2019 09:45:12 +0100 |
Chris Cannam |
Provide facility to re-align models
tuning-difference
|
| Thu, 16 May 2019 15:55:46 +0100 |
Chris Cannam |
Make a completion figure available to alignment, + a couple of other fixes
tuning-difference
|
| Wed, 15 May 2019 17:52:22 +0100 |
Chris Cannam |
Experiment with optionally taking tuning difference into account for alignment
tuning-difference
|
| Tue, 14 May 2019 14:51:09 +0100 |
Chris Cannam |
Permit subclass to determine window title format
single-point
|
| Tue, 30 Apr 2019 11:36:38 +0100 |
Chris Cannam |
Experimental branch based on Thorn C++ code from RG
thorn-cpp
|
| Fri, 26 Apr 2019 18:39:46 +0100 |
Chris Cannam |
Ensure main model also gets aligned (as reference)
single-point
|
| Wed, 24 Apr 2019 11:45:31 +0100 |
Chris Cannam |
Merge from default branch
single-point
|
| Thu, 04 Apr 2019 16:17:11 +0100 |
Chris Cannam |
Update so Document owns the alignment model's input aggregate model
|
| Thu, 04 Apr 2019 11:16:29 +0100 |
Chris Cannam |
Update so Document owns the alignment model's input aggregate model, just as any other model
single-point
|
| Tue, 02 Apr 2019 14:45:57 +0100 |
Chris Cannam |
Make layer order in document also stable on file load/save
single-point
|
| Tue, 02 Apr 2019 14:32:57 +0100 |
Chris Cannam |
Avoid arbitrarily reordering models from file order on load
single-point
|
| Tue, 02 Apr 2019 14:32:24 +0100 |
Chris Cannam |
Retain models in registration order, to assist in getting stable file format in load/save
single-point
|
| Tue, 02 Apr 2019 14:26:46 +0100 |
Chris Cannam |
Some debug output adjustments
single-point
|
| Thu, 28 Mar 2019 14:34:00 +0000 |
Chris Cannam |
Add exportLayerTo (moved here from MainWindow)
single-point
|
| Thu, 28 Mar 2019 13:37:40 +0000 |
Chris Cannam |
Support reading OSC script from stdin; make it possible to run OSC script even without external OSC port
single-point
|
| Thu, 28 Mar 2019 11:55:54 +0000 |
Chris Cannam |
Update to using export IDs stored in the XmlExportables
single-point
|
| Thu, 28 Mar 2019 10:39:53 +0000 |
Chris Cannam |
Merge from branch osc-script
single-point
|
| Tue, 26 Mar 2019 14:34:35 +0000 |
Chris Cannam |
Debug output
osc-script
|
| Mon, 25 Mar 2019 15:49:23 +0000 |
Chris Cannam |
Toward running an OSC script in batch
osc-script
|
| Fri, 22 Mar 2019 17:49:23 +0000 |
Chris Cannam |
Use updated ImageModel
single-point
|
| Fri, 22 Mar 2019 11:05:29 +0000 |
Chris Cannam |
Use updated TextModel
single-point
|
| Thu, 21 Mar 2019 13:34:34 +0000 |
Chris Cannam |
Updates for SparseOneDimensionalModel in new API
single-point
|
| Wed, 20 Mar 2019 11:19:44 +0000 |
Chris Cannam |
Use matching-event search in tone generator
single-point
|
| Tue, 19 Mar 2019 13:06:58 +0000 |
Chris Cannam |
Further updates for new API - but we still need some more support in the API itself
single-point
|
| Fri, 15 Mar 2019 14:24:46 +0000 |
Chris Cannam |
Update following RegionModel API change
single-point
|
| Fri, 15 Mar 2019 11:09:34 +0000 |
Chris Cannam |
Update to use external commands
single-point
|
| Thu, 14 Mar 2019 15:33:40 +0000 |
Chris Cannam |
Updates for single-point changes, including removal of FlexiNoteModel
single-point
|
| Fri, 08 Mar 2019 13:37:51 +0000 |
Chris Cannam |
Build fix for single-point changes
single-point
|
| Wed, 09 Jan 2019 15:25:09 +0000 |
Chris Cannam |
Merge from branch fix-static-analysis
|
| Wed, 09 Jan 2019 14:42:25 +0000 |
Chris Cannam |
Provide path, not just initial format, to dialog to enable re-guessing if user changes separator
|
| Tue, 08 Jan 2019 15:19:03 +0000 |
Chris Cannam |
Minor warning text fix
|
| Fri, 04 Jan 2019 15:23:53 +0000 |
Chris Cannam |
Wire up modelAboutToBeDeleted which appears to have been missed earlier - fixing crash when timer fires after model deleted e.g. on app exit
|
| Wed, 19 Dec 2018 09:31:47 +0000 |
Chris Cannam |
Fix overlooked int -> ZoomLevel update (thanks bluemoon)
|
| Wed, 19 Dec 2018 09:29:05 +0000 |
Chris Cannam |
Fix crash on exit when not using OSC (https://sourceforge.net/p/sv1/bugs/263/)
|
| Tue, 04 Dec 2018 13:49:20 +0000 |
Chris Cannam |
Merge from default branch
fix-static-analysis
|
| Thu, 29 Nov 2018 14:25:50 +0000 |
Chris Cannam |
Ensure that undo restores deleted pane's layers in their original order
|
| Mon, 26 Nov 2018 14:34:06 +0000 |
Chris Cannam |
Use nullptr throughout
fix-static-analysis
|
| Mon, 26 Nov 2018 13:53:57 +0000 |
Chris Cannam |
Header guards
fix-static-analysis
|
| Mon, 26 Nov 2018 13:53:26 +0000 |
Chris Cannam |
Use override throughout
fix-static-analysis
|
| Thu, 22 Nov 2018 14:55:43 +0000 |
Chris Cannam |
Fixes from clang modernize-use-override
fix-static-analysis
|
| Fri, 09 Nov 2018 15:38:49 +0000 |
Chris Cannam |
Try to avoid deleting thread while OSC interface is still being set up
|
| Tue, 06 Nov 2018 08:59:08 +0000 |
Chris Cannam |
Merge from default branch
zoom
|
| Thu, 18 Oct 2018 13:22:16 +0100 |
Chris Cannam |
Minor debug change
|
| Mon, 15 Oct 2018 15:50:39 +0100 |
Chris Cannam |
Further work on #1773 "Loading a session with features extracted from multiplexed inputs". Re-read the aggregate wave models from the session file; also re-order the way they are written so as to improve the likelihood of successfully re-reading them (! - as it stood before, there was some chance involved)
|
| Wed, 10 Oct 2018 08:44:37 +0100 |
Chris Cannam |
Merge from branch zoom
|
| Tue, 09 Oct 2018 15:55:26 +0100 |
Chris Cannam |
Merge from default branch
zoom
|
| Tue, 09 Oct 2018 15:55:16 +0100 |
Chris Cannam |
Don't resample an incoming audio file to match the main model's rate, if the aim of importing is to replace the main model anyway
|
| Tue, 09 Oct 2018 12:53:23 +0100 |
Chris Cannam |
This should be on SVCERR
zoom
|
| Thu, 20 Sep 2018 11:45:37 +0100 |
Chris Cannam |
ZoomLevel fixes
zoom
|
| Wed, 12 Sep 2018 15:58:35 +0100 |
Chris Cannam |
Merge from branch import-audio-data
|
| Wed, 12 Sep 2018 15:42:33 +0100 |
Chris Cannam |
Ensure data files used as import sources don't end up in Recent Files
import-audio-data
|
| Wed, 12 Sep 2018 13:57:46 +0100 |
Chris Cannam |
Update for slightly adjusted WritableWaveFileModel api
import-audio-data
|
| Tue, 11 Sep 2018 14:37:31 +0100 |
Chris Cannam |
Query recorded file locations from svcore code
import-audio-data
|
| Fri, 07 Sep 2018 16:14:19 +0100 |
Chris Cannam |
Avoid leaking dialogs
import-audio-data
|
| Tue, 04 Sep 2018 13:19:43 +0100 |
Chris Cannam |
Merge from default branch
import-audio-data
|
| Tue, 04 Sep 2018 11:32:49 +0100 |
Chris Cannam |
Merge from branch avoid-pointer-keys
|
| Mon, 13 Aug 2018 16:45:52 +0100 |
Chris Cannam |
Use model IDs
avoid-pointer-keys
|
| Mon, 13 Aug 2018 14:13:38 +0100 |
Chris Cannam |
Associate a note-on time with each pending note-off as well, so we can check whether a rewind action (or looping) has caused us to jump to before the note began. Also improve implementation of note-off structure comparator
|
| Mon, 13 Aug 2018 11:44:33 +0100 |
Chris Cannam |
Oops!
|
| Mon, 13 Aug 2018 11:43:21 +0100 |
Chris Cannam |
Minor tidy
|
| Wed, 08 Aug 2018 15:25:35 +0100 |
Chris Cannam |
Fix compiler warnings
|
| Wed, 08 Aug 2018 15:19:06 +0100 |
Chris Cannam |
Smoother model updates, some debug
|
| Wed, 08 Aug 2018 15:18:52 +0100 |
Chris Cannam |
If audio IO is recreated due to channel count change when recording, make sure it's recreated ready-resumed if we were recording already
|
| Wed, 08 Aug 2018 15:17:36 +0100 |
Chris Cannam |
Fix failure to call updateModel() ever again after no frames available
|
| Wed, 04 Jul 2018 16:05:56 +0100 |
Chris Cannam |
Fix stupid error on win32
|
| Tue, 03 Jul 2018 15:35:56 +0100 |
Chris Cannam |
Wait for completion
|
| Tue, 03 Jul 2018 15:06:24 +0100 |
Chris Cannam |
This is odd, removing it doesn't seem to work
|
| Tue, 03 Jul 2018 14:42:27 +0100 |
Chris Cannam |
Attempt to avoid passing on library path to system executables
|
| Thu, 28 Jun 2018 15:29:26 +0100 |
Chris Cannam |
Toward importing audio from CSVs
import-audio-data
|
| Thu, 21 Jun 2018 15:37:36 +0100 |
Chris Cannam |
Minor wording tweak
|
| Wed, 20 Jun 2018 10:41:59 +0100 |
Chris Cannam |
Add a scary warning for incomplete session load
|
| Mon, 18 Jun 2018 14:16:06 +0100 |
Chris Cannam |
Avoid setting the session file path when loading an incomplete document, so that the default-file save-on-exit and File->Save are not activated (to avoid losing references to unfound audio files)
|
| Mon, 11 Jun 2018 14:40:56 +0100 |
Chris Cannam |
Merge from branch plugin-path-config
|
| Fri, 08 Jun 2018 11:53:04 +0100 |
Chris Cannam |
Use wide-char env variable lookup
plugin-path-config
|
| Tue, 15 May 2018 11:11:49 +0100 |
Chris Cannam |
Fix compiler warning
|
| Thu, 19 Apr 2018 13:17:42 +0100 |
Chris Cannam |
Make "Select All" select the whole span of everything that exists, not just the main model (toward SF bug #243 Copied Time Instant Layer does not include instant at end of track)
|
| Wed, 18 Apr 2018 15:19:09 +0100 |
Chris Cannam |
Proper handling for notes that end at the same frame as a subsequent note of the same pitch begins. The note-off needs to be associated with the prior note, not a spurious zero-duration version of the subsequent note.
|
| Thu, 01 Mar 2018 18:02:22 +0000 |
Chris Cannam |
Untabify
|
| Tue, 07 Mar 2017 11:48:29 +0000 |
Chris Cannam |
Debug output
|
| Mon, 06 Mar 2017 17:37:23 +0000 |
Chris Cannam |
Fix some one-off memory leaks (including distracting ones in tests)
|
| Mon, 06 Mar 2017 17:23:46 +0000 |
Chris Cannam |
Some bits and bobs to do with handling memory pressure
|
| Sun, 05 Mar 2017 17:15:46 +0000 |
Chris Cannam |
More debug output during startup
|
| Tue, 28 Feb 2017 11:21:32 +0000 |
Chris Cannam |
Debug output
|
| Mon, 27 Feb 2017 16:52:47 +0000 |
Chris Cannam |
Write aggregate models to .sv file when saving document. They still are not reloaded, but I think this is far as I'm prepared to go for 3.0.
|
| Mon, 27 Feb 2017 16:26:37 +0000 |
Chris Cannam |
Store aggregate models in the document and release them when they are invalidated (because their components have been released). They're no longer leaked, but we still don't save them in the session file.
|
| Mon, 27 Feb 2017 13:24:11 +0000 |
Chris Cannam |
Comment only
|
| Fri, 24 Feb 2017 10:16:40 +0000 |
Chris Cannam |
If we can't open a record device, fall back to playback-only mode
|
| Thu, 23 Feb 2017 09:22:56 +0000 |
Chris Cannam |
Debug notes, tidying
|
| Tue, 21 Feb 2017 15:33:03 +0000 |
Chris Cannam |
Logging from audio I/O
|
| Wed, 18 Jan 2017 14:22:25 +0000 |
Chris Cannam |
Connect these only once
|
| Fri, 13 Jan 2017 10:29:55 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
|
| Wed, 11 Jan 2017 17:48:21 +0000 |
Chris Cannam |
Complete that fix for the record target
3.0-integration
|
| Wed, 11 Jan 2017 17:46:37 +0000 |
Chris Cannam |
Fix flickery level meters
3.0-integration
|
| Thu, 05 Jan 2017 13:04:30 +0000 |
Chris Cannam |
Handle running out of disc space when trying to open a file
3.0-integration
|
| Wed, 04 Jan 2017 19:10:32 +0000 |
Chris Cannam |
Merge
3.0-integration
|
| Wed, 04 Jan 2017 18:54:50 +0000 |
Chris Cannam |
Ensure a time ruler layer created from a template is identified as such, so that it gets added to subsequent panes as well
3.0-integration
|
| Wed, 21 Dec 2016 14:02:29 +0000 |
Chris Cannam |
Don't load window size from session (#1769)
3.0-integration
|
| Wed, 04 Jan 2017 16:53:06 +0000 |
Chris Cannam |
Pull out record buffer into a separate RT-ish thread
3.0-integration
|
| Wed, 04 Jan 2017 16:03:12 +0000 |
Chris Cannam |
Wire up record monitoring
3.0-integration
|
| Wed, 04 Jan 2017 14:22:39 +0000 |
Chris Cannam |
Make writable model updating explicit rather than essentially an arbitrary hidden accident
3.0-integration
|
| Wed, 04 Jan 2017 14:21:24 +0000 |
Chris Cannam |
Ah, there already was a mechanism for that (recordDurationChanged()). But in any case we are better off prompting the model to update I think.
3.0-integration
|
| Wed, 04 Jan 2017 13:23:18 +0000 |
Chris Cannam |
Add record update timer (very crude this)
3.0-integration
|
| Wed, 04 Jan 2017 11:48:03 +0000 |
Chris Cannam |
Fix race condition in first-time recording, where adding the recording wave model would prompt the audio play source to note that its channel count had increased (from 0 to, say, 2) and thus to cause the audio device to be reopened, stopping recording. Fix is to make this only happen if channel count increases beyond that of the device, which shouldn't happen in the recording case
3.0-integration
|
| Wed, 04 Jan 2017 09:57:13 +0000 |
Chris Cannam |
Report audio driver startup error
3.0-integration
|
| Mon, 19 Dec 2016 16:34:38 +0000 |
Chris Cannam |
Merge from branch svg, and thus (in some subrepos) from levelpanwidget
3.0-integration
|
| Mon, 19 Dec 2016 16:32:34 +0000 |
Chris Cannam |
Implement "Export SVG file..."
svg
|
| Sat, 17 Dec 2016 11:06:48 +0000 |
Chris Cannam |
A useful simplification in rate handling: don't reset to 0 when last model goes
levelpanwidget
|
| Thu, 15 Dec 2016 10:36:41 +0000 |
Chris Cannam |
Moving around some UI bits
levelpanwidget
|
| Wed, 14 Dec 2016 14:28:41 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
levelpanwidget
|
| Wed, 14 Dec 2016 11:56:34 +0000 |
Chris Cannam |
Debug changes
3.0-integration
|
| Wed, 14 Dec 2016 11:55:47 +0000 |
Chris Cannam |
When returning the frame that we have filled to, avoid accidentally reducing the frame number (making it appear we are less filled than we really are) when we had intended to round it up to the full requested amount. Fixes some unexpected double-playback in non-looping play-selection mode.
3.0-integration
|
| Tue, 13 Dec 2016 16:23:48 +0000 |
Chris Cannam |
Fix some compiler problems
3.0-integration
|
| Tue, 13 Dec 2016 15:46:11 +0000 |
Chris Cannam |
Remove unused param
3.0-integration
|
| Tue, 13 Dec 2016 12:03:48 +0000 |
Chris Cannam |
Handle increases in the overall channel count by closing and reopening the audio device.
3.0-integration
|
| Mon, 12 Dec 2016 17:15:24 +0000 |
Chris Cannam |
Remove unused signal
3.0-integration
|
| Mon, 12 Dec 2016 17:08:10 +0000 |
Chris Cannam |
Jump to start when recording, so you can see something is happening
3.0-integration
|
| Mon, 12 Dec 2016 15:45:33 +0000 |
Chris Cannam |
Reopen the audio device directly when preference is changed
3.0-integration
|
| Fri, 09 Dec 2016 19:04:33 +0000 |
Chris Cannam |
Fix compiler warnings
3.0-integration
|
| Fri, 09 Dec 2016 18:01:55 +0000 |
Chris Cannam |
Merge from branch bqresample
3.0-integration
|
| Fri, 09 Dec 2016 14:40:49 +0000 |
Chris Cannam |
Fixes to sample rate and latency handling
bqresample
|
| Fri, 09 Dec 2016 13:46:34 +0000 |
Chris Cannam |
Some fixes to sample rate management
bqresample
|
| Wed, 07 Dec 2016 13:57:45 +0000 |
Chris Cannam |
Add a ResamplerWrapper
bqresample
|
| Wed, 07 Dec 2016 12:04:41 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
bqresample
|
| Wed, 07 Dec 2016 11:52:26 +0000 |
Chris Cannam |
Merge from branch bqaudioio
bqresample
|
| Wed, 07 Dec 2016 11:51:42 +0000 |
Chris Cannam |
Merge from branch bqresample
bqaudioio
|
| Wed, 07 Dec 2016 11:50:54 +0000 |
Chris Cannam |
Audio device selection
bqaudioio
|
| Tue, 06 Dec 2016 15:59:06 +0000 |
Chris Cannam |
Update for bqaudioio changes
3.0-integration
|
| Mon, 05 Dec 2016 17:03:09 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
levelpanwidget
|
| Mon, 05 Dec 2016 16:56:36 +0000 |
Chris Cannam |
Start pruning other resampler logic than bqresample
bqresample
|
| Mon, 05 Dec 2016 16:54:19 +0000 |
Chris Cannam |
Start pruning other resampler logic than bqresample
3.0-integration
|
| Mon, 05 Dec 2016 16:39:03 +0000 |
Chris Cannam |
Remove resampler quality option (#1760)
3.0-integration
|
| Mon, 05 Dec 2016 15:47:40 +0000 |
Chris Cannam |
Start incorporating level-pan widgets
levelpanwidget
|
| Wed, 30 Nov 2016 11:44:40 +0000 |
Chris Cannam |
Delete audio I/O objects in a fixed order
3.0-integration
|
| Fri, 25 Nov 2016 10:08:52 +0000 |
Chris Cannam |
Merge from branch subdivide-instants
3.0-integration
|
| Fri, 25 Nov 2016 09:57:36 +0000 |
Chris Cannam |
Add Winnow as well
subdivide-instants
|
| Fri, 25 Nov 2016 09:38:53 +0000 |
Chris Cannam |
Implement "Subdivide Selected Instants". Also add the relabel command to the history, which I previously forgot to do!
subdivide-instants
|
| Wed, 16 Nov 2016 16:12:42 +0000 |
Chris Cannam |
Debug output improvements, and make the checker actually attempt to call the descriptor function for known plugin types
3.0-integration
|
| Fri, 04 Nov 2016 14:57:03 +0000 |
Chris Cannam |
Merge from branch piper
3.0-integration
|
| Tue, 01 Nov 2016 14:08:57 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
piper
|
| Fri, 28 Oct 2016 15:20:58 +0100 |
Chris Cannam |
Merge from branch piper
3.0-integration
|
| Fri, 28 Oct 2016 15:19:11 +0100 |
Chris Cannam |
Merge from branch project-file-rework
piper
|
| Tue, 25 Oct 2016 11:05:15 +0100 |
Chris Cannam |
Merge from branch 3.0-integration
project-file-rework
|
| Mon, 24 Oct 2016 17:53:33 +0100 |
Chris Cannam |
Cut down vastly on the number of config.pri files and places where their contents has to be effectively duplicated without them
project-file-rework
|
| Fri, 21 Oct 2016 11:49:27 +0100 |
Chris Cannam |
Restore native-Vamp factory and make the choice between Piper and Native a preference
3.0-integration
|
| Thu, 20 Oct 2016 14:07:06 +0100 |
Chris Cannam |
Path
3.0-integration
|
| Thu, 20 Oct 2016 11:20:01 +0100 |
Chris Cannam |
Merge from branch "msvc2015_64"
3.0-integration
|
| Thu, 20 Oct 2016 11:19:34 +0100 |
Chris Cannam |
Merge from branch 3.0-integration
piper
|
| Wed, 19 Oct 2016 17:33:32 +0100 |
Chris Cannam |
Further MSVC build stuff. Committing this as-is because it's building and running now, but there's a lot to tidy up.
msvc2015_64
|
| Tue, 18 Oct 2016 15:56:21 +0100 |
Chris Cannam |
MSVC build fixes
msvc2015_64
|
| Fri, 14 Oct 2016 14:33:32 +0100 |
Chris Cannam |
Refer to piper-cpp includes
piper
|
| Tue, 20 Sep 2016 09:17:13 +0100 |
Chris Cannam |
Merge from branch tony-2.0-integration
3.0-integration
|
| Fri, 19 Aug 2016 15:58:57 +0100 |
Chris Cannam |
Merge latest SV 3.0 branch code
tony-2.0-integration
|
| Thu, 21 Apr 2016 15:06:43 +0100 |
Chris Cannam |
Merge from branch "alignment-simple"
3.0-integration
|
| Wed, 20 Apr 2016 12:06:28 +0100 |
Chris Cannam |
Merge branches 3.0-integration and imaf_enc to 3.0-plus-imaf
3.0-plus-imaf
|
| Fri, 18 Mar 2016 14:25:05 +0000 |
Chris Cannam |
Start including Vamp SDK into main build, as we do with Sonic Annotator
3.0-integration
|
| Fri, 04 Mar 2016 12:39:05 +0000 |
Chris Cannam |
Merge from default branch
3.0-integration
|
| Thu, 03 Mar 2016 09:12:28 +0000 |
Chris Cannam |
Fix crashes in play() and stop() if no record target / play source present
alignment-simple
|
| Wed, 02 Mar 2016 17:25:27 +0000 |
Chris Cannam |
Merge in from SV 3.0-integration branches
alignment-simple
|
| Thu, 04 Feb 2016 11:19:01 +0000 |
Chris Cannam |
Merge from branch "tony-2.0-integration"
3.0-integration
|
| Sat, 30 Jan 2016 12:05:14 +0000 |
Chris Cannam |
Update acinclude files to look for qt5-qmake as well as qmake-qt5
|
| Fri, 22 Jan 2016 13:39:45 +0000 |
Chris Cannam |
Convert 3d model column type from QVector to std::vector; replace another user of ResizeableBitset
3.0-integration
|
| Tue, 19 Jan 2016 16:29:57 +0000 |
Chris Cannam |
Remove background mode, it no longer works properly
3.0-integration
|
| Wed, 14 Oct 2015 16:39:14 +0100 |
Chris Cannam |
Remove more debug
tony-2.0-integration
|
| Wed, 14 Oct 2015 16:02:09 +0100 |
Chris Cannam |
Trim suspend/resume calls
tony-2.0-integration
|
| Wed, 14 Oct 2015 15:08:55 +0100 |
Chris Cannam |
Put recorded files in subdirectories by date
tony-2.0-integration
|
| Wed, 14 Oct 2015 14:52:46 +0100 |
Chris Cannam |
Merge from branch "3.0-integration"
tony-2.0-integration
|
| Wed, 14 Oct 2015 13:34:46 +0100 |
Chris Cannam |
Remake SR converter when adding a model, if necessary; remove crap converter to simplify
3.0-integration
|
| Wed, 14 Oct 2015 13:34:07 +0100 |
Chris Cannam |
Remove source (now unused)
3.0-integration
|
| Wed, 14 Oct 2015 13:33:42 +0100 |
Chris Cannam |
Remove duplicate code
3.0-integration
|
| Wed, 14 Oct 2015 13:33:23 +0100 |
Chris Cannam |
Compile fix
3.0-integration
|
| Wed, 14 Oct 2015 10:19:24 +0100 |
Chris Cannam |
Merge from branch "3.0-integration"
tony-2.0-integration
|
| Wed, 14 Oct 2015 10:18:58 +0100 |
Chris Cannam |
Merge from branch "tony-2.0-integration"
3.0-integration
|
| Wed, 14 Oct 2015 10:17:32 +0100 |
Chris Cannam |
Merge, but dropping the last commit from the recording branch because I prefer the way it was done here
3.0-integration
|
| Mon, 12 Oct 2015 12:43:06 +0100 |
Chris Cannam |
Merge from recording branch
3.0-integration
|
| Tue, 22 Sep 2015 17:12:37 +0100 |
Chris Cannam |
Fix suspending/resuming audio device; it wasn't suspending when playback reached the end, only when the user stopped explicitly
recording
|
| Tue, 13 Oct 2015 14:26:40 +0100 |
Chris Cannam |
Adjust model update during recording or writing a new wave file. Formerly we were using the model's completion percentage to indicate write proportion and completion -- that's not a good idea because some layers will reasonably avoid rendering at all until a model reaches 100% completion (it's supposed to report only progress on the initial model generation, and the model shouldn't change during completion updates).
tony-2.0-integration
|
| Mon, 12 Oct 2015 17:10:43 +0100 |
Chris Cannam |
Update analysis stuff when recording starts (and when model is added) rather than when it ends. Not continuing to update during recording though...
tony-2.0-integration
|
| Mon, 12 Oct 2015 15:06:02 +0100 |
Chris Cannam |
Suspend audio driver when stopping recording from record button
3.0-integration
|
| Mon, 12 Oct 2015 13:51:59 +0100 |
Chris Cannam |
Fix compiler warnings
3.0-integration
|
| Mon, 12 Oct 2015 13:24:12 +0100 |
Chris Cannam |
Restore record button toggle state if user cancels file session save dialog after hitting record
3.0-integration
|
| Mon, 12 Oct 2015 15:06:02 +0100 |
Chris Cannam |
Suspend audio driver when stopping recording from record button
tony-2.0-integration
|
| Mon, 12 Oct 2015 13:51:59 +0100 |
Chris Cannam |
Fix compiler warnings
tony-2.0-integration
|
| Mon, 12 Oct 2015 13:24:12 +0100 |
Chris Cannam |
Restore record button toggle state if user cancels file session save dialog after hitting record
tony-2.0-integration
|
| Thu, 17 Sep 2015 13:46:07 +0100 |
Chris Cannam |
Merge from branch "recording"
3.0-integration
|
| Thu, 17 Sep 2015 12:08:29 +0100 |
Chris Cannam |
Merge from branch recording
tony-2.0-integration
|
| Wed, 16 Sep 2015 15:16:54 +0100 |
Chris Cannam |
Suspend/resume audio device when not in use to save battery (only implemented for PulseAudioIO so far)
recording
|
| Wed, 16 Sep 2015 12:04:26 +0100 |
Chris Cannam |
Add status bar "Recording" message and timer while recording
recording
|
| Wed, 16 Sep 2015 12:04:26 +0100 |
Chris Cannam |
Add status bar "Recording" message and timer while recording
tony-2.0-integration
|
| Tue, 15 Sep 2015 16:38:09 +0100 |
Chris Cannam |
Merge from branch recording
tony-2.0-integration
|
| Tue, 15 Sep 2015 16:34:08 +0100 |
Chris Cannam |
Add audio record mode (option to replace session) and support for browsing to record directory
recording
|
| Thu, 20 Aug 2015 14:54:21 +0100 |
Chris Cannam |
Merge through to branch for Tony 2.0
tony-2.0-integration
|
| Thu, 20 Aug 2015 13:15:19 +0100 |
Chris Cannam |
Merge from branch recording
3.0-integration
|
| Wed, 19 Aug 2015 17:21:40 +0100 |
Chris Cannam |
New filename for each audio recording
recording
|
| Wed, 19 Aug 2015 17:03:31 +0100 |
Chris Cannam |
Make WritableWaveFileModel a true WaveFileModel (and ReadOnlyWaveFileModel the other sort of it). Enable recording from an empty session using that.
recording
|
