Chris@1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
Chris@1: # @configure_input@
Chris@1: 
Chris@1: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
Chris@1: # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
Chris@1: # Inc.
Chris@1: # This Makefile.in is free software; the Free Software Foundation
Chris@1: # gives unlimited permission to copy and/or distribute it,
Chris@1: # with or without modifications, as long as this notice is preserved.
Chris@1: 
Chris@1: # This program is distributed in the hope that it will be useful,
Chris@1: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
Chris@1: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
Chris@1: # PARTICULAR PURPOSE.
Chris@1: 
Chris@1: @SET_MAKE@
Chris@1: 
Chris@1: VPATH = @srcdir@
Chris@1: pkgdatadir = $(datadir)/@PACKAGE@
Chris@1: pkgincludedir = $(includedir)/@PACKAGE@
Chris@1: pkglibdir = $(libdir)/@PACKAGE@
Chris@1: pkglibexecdir = $(libexecdir)/@PACKAGE@
Chris@1: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
Chris@1: install_sh_DATA = $(install_sh) -c -m 644
Chris@1: install_sh_PROGRAM = $(install_sh) -c
Chris@1: install_sh_SCRIPT = $(install_sh) -c
Chris@1: INSTALL_HEADER = $(INSTALL_DATA)
Chris@1: transform = $(program_transform_name)
Chris@1: NORMAL_INSTALL = :
Chris@1: PRE_INSTALL = :
Chris@1: POST_INSTALL = :
Chris@1: NORMAL_UNINSTALL = :
Chris@1: PRE_UNINSTALL = :
Chris@1: POST_UNINSTALL = :
Chris@1: build_triplet = @build@
Chris@1: host_triplet = @host@
Chris@1: subdir = doc/libogg
Chris@1: DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
Chris@1: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
Chris@1: am__aclocal_m4_deps = $(top_srcdir)/configure.in
Chris@1: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
Chris@1: 	$(ACLOCAL_M4)
Chris@1: mkinstalldirs = $(install_sh) -d
Chris@1: CONFIG_HEADER = $(top_builddir)/config.h
Chris@1: CONFIG_CLEAN_FILES =
Chris@1: CONFIG_CLEAN_VPATH_FILES =
Chris@1: SOURCES =
Chris@1: DIST_SOURCES =
Chris@1: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
Chris@1: am__vpath_adj = case $$p in \
Chris@1:     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
Chris@1:     *) f=$$p;; \
Chris@1:   esac;
Chris@1: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
Chris@1: am__install_max = 40
Chris@1: am__nobase_strip_setup = \
Chris@1:   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
Chris@1: am__nobase_strip = \
Chris@1:   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
Chris@1: am__nobase_list = $(am__nobase_strip_setup); \
Chris@1:   for p in $$list; do echo "$$p $$p"; done | \
Chris@1:   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
Chris@1:   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
Chris@1:     if (++n[$$2] == $(am__install_max)) \
Chris@1:       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
Chris@1:     END { for (dir in files) print dir, files[dir] }'
Chris@1: am__base_list = \
Chris@1:   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
Chris@1:   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
Chris@1: am__installdirs = "$(DESTDIR)$(docdir)"
Chris@1: DATA = $(doc_DATA)
Chris@1: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
Chris@1: ACLOCAL = @ACLOCAL@
Chris@1: AMTAR = @AMTAR@
Chris@1: AR = @AR@
Chris@1: AUTOCONF = @AUTOCONF@
Chris@1: AUTOHEADER = @AUTOHEADER@
Chris@1: AUTOMAKE = @AUTOMAKE@
Chris@1: AWK = @AWK@
Chris@1: CC = @CC@
Chris@1: CCDEPMODE = @CCDEPMODE@
Chris@1: CFLAGS = @CFLAGS@
Chris@1: CPP = @CPP@
Chris@1: CPPFLAGS = @CPPFLAGS@
Chris@1: CYGPATH_W = @CYGPATH_W@
Chris@1: DEBUG = @DEBUG@
Chris@1: DEFS = @DEFS@
Chris@1: DEPDIR = @DEPDIR@
Chris@1: DLLTOOL = @DLLTOOL@
Chris@1: DSYMUTIL = @DSYMUTIL@
Chris@1: DUMPBIN = @DUMPBIN@
Chris@1: ECHO_C = @ECHO_C@
Chris@1: ECHO_N = @ECHO_N@
Chris@1: ECHO_T = @ECHO_T@
Chris@1: EGREP = @EGREP@
Chris@1: EXEEXT = @EXEEXT@
Chris@1: FGREP = @FGREP@
Chris@1: GREP = @GREP@
Chris@1: INCLUDE_INTTYPES_H = @INCLUDE_INTTYPES_H@
Chris@1: INCLUDE_STDINT_H = @INCLUDE_STDINT_H@
Chris@1: INCLUDE_SYS_TYPES_H = @INCLUDE_SYS_TYPES_H@
Chris@1: INSTALL = @INSTALL@
Chris@1: INSTALL_DATA = @INSTALL_DATA@
Chris@1: INSTALL_PROGRAM = @INSTALL_PROGRAM@
Chris@1: INSTALL_SCRIPT = @INSTALL_SCRIPT@
Chris@1: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
Chris@1: LD = @LD@
Chris@1: LDFLAGS = @LDFLAGS@
Chris@1: LIBOBJS = @LIBOBJS@
Chris@1: LIBS = @LIBS@
Chris@1: LIBTOOL = @LIBTOOL@
Chris@1: LIBTOOL_DEPS = @LIBTOOL_DEPS@
Chris@1: LIB_AGE = @LIB_AGE@
Chris@1: LIB_CURRENT = @LIB_CURRENT@
Chris@1: LIB_REVISION = @LIB_REVISION@
Chris@1: LIPO = @LIPO@
Chris@1: LN_S = @LN_S@
Chris@1: LTLIBOBJS = @LTLIBOBJS@
Chris@1: MAINT = @MAINT@
Chris@1: MAKEINFO = @MAKEINFO@
Chris@1: MANIFEST_TOOL = @MANIFEST_TOOL@
Chris@1: MKDIR_P = @MKDIR_P@
Chris@1: NM = @NM@
Chris@1: NMEDIT = @NMEDIT@
Chris@1: OBJDUMP = @OBJDUMP@
Chris@1: OBJEXT = @OBJEXT@
Chris@1: OPT = @OPT@
Chris@1: OTOOL = @OTOOL@
Chris@1: OTOOL64 = @OTOOL64@
Chris@1: PACKAGE = @PACKAGE@
Chris@1: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
Chris@1: PACKAGE_NAME = @PACKAGE_NAME@
Chris@1: PACKAGE_STRING = @PACKAGE_STRING@
Chris@1: PACKAGE_TARNAME = @PACKAGE_TARNAME@
Chris@1: PACKAGE_URL = @PACKAGE_URL@
Chris@1: PACKAGE_VERSION = @PACKAGE_VERSION@
Chris@1: PATH_SEPARATOR = @PATH_SEPARATOR@
Chris@1: PROFILE = @PROFILE@
Chris@1: RANLIB = @RANLIB@
Chris@1: SED = @SED@
Chris@1: SET_MAKE = @SET_MAKE@
Chris@1: SHELL = @SHELL@
Chris@1: SIZE16 = @SIZE16@
Chris@1: SIZE32 = @SIZE32@
Chris@1: SIZE64 = @SIZE64@
Chris@1: STRIP = @STRIP@
Chris@1: USIZE16 = @USIZE16@
Chris@1: USIZE32 = @USIZE32@
Chris@1: VERSION = @VERSION@
Chris@1: abs_builddir = @abs_builddir@
Chris@1: abs_srcdir = @abs_srcdir@
Chris@1: abs_top_builddir = @abs_top_builddir@
Chris@1: abs_top_srcdir = @abs_top_srcdir@
Chris@1: ac_ct_AR = @ac_ct_AR@
Chris@1: ac_ct_CC = @ac_ct_CC@
Chris@1: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
Chris@1: am__include = @am__include@
Chris@1: am__leading_dot = @am__leading_dot@
Chris@1: am__quote = @am__quote@
Chris@1: am__tar = @am__tar@
Chris@1: am__untar = @am__untar@
Chris@1: bindir = @bindir@
Chris@1: build = @build@
Chris@1: build_alias = @build_alias@
Chris@1: build_cpu = @build_cpu@
Chris@1: build_os = @build_os@
Chris@1: build_vendor = @build_vendor@
Chris@1: builddir = @builddir@
Chris@1: datadir = @datadir@
Chris@1: datarootdir = @datarootdir@
Chris@1: docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION)/ogg
Chris@1: dvidir = @dvidir@
Chris@1: exec_prefix = @exec_prefix@
Chris@1: host = @host@
Chris@1: host_alias = @host_alias@
Chris@1: host_cpu = @host_cpu@
Chris@1: host_os = @host_os@
Chris@1: host_vendor = @host_vendor@
Chris@1: htmldir = @htmldir@
Chris@1: includedir = @includedir@
Chris@1: infodir = @infodir@
Chris@1: install_sh = @install_sh@
Chris@1: libdir = @libdir@
Chris@1: libexecdir = @libexecdir@
Chris@1: localedir = @localedir@
Chris@1: localstatedir = @localstatedir@
Chris@1: mandir = @mandir@
Chris@1: mkdir_p = @mkdir_p@
Chris@1: oldincludedir = @oldincludedir@
Chris@1: pdfdir = @pdfdir@
Chris@1: prefix = @prefix@
Chris@1: program_transform_name = @program_transform_name@
Chris@1: psdir = @psdir@
Chris@1: sbindir = @sbindir@
Chris@1: sharedstatedir = @sharedstatedir@
Chris@1: srcdir = @srcdir@
Chris@1: sysconfdir = @sysconfdir@
Chris@1: target_alias = @target_alias@
Chris@1: top_build_prefix = @top_build_prefix@
Chris@1: top_builddir = @top_builddir@
Chris@1: top_srcdir = @top_srcdir@
Chris@1: doc_DATA = bitpacking.html datastructures.html decoding.html encoding.html\
Chris@1: 	general.html index.html ogg_packet.html ogg_packet_clear.html\
Chris@1: 	ogg_page.html ogg_page_bos.html ogg_page_checksum_set.html\
Chris@1: 	ogg_page_continued.html ogg_page_eos.html ogg_page_granulepos.html\
Chris@1: 	ogg_page_packets.html ogg_page_pageno.html ogg_page_serialno.html\
Chris@1: 	ogg_page_version.html ogg_stream_clear.html ogg_stream_destroy.html\
Chris@1: 	ogg_stream_eos.html ogg_stream_flush.html ogg_stream_init.html\
Chris@1: 	ogg_stream_packetin.html ogg_stream_packetout.html\
Chris@1: 	ogg_stream_packetpeek.html ogg_stream_pagein.html\
Chris@1: 	ogg_stream_pageout.html ogg_stream_pageout_fill.html ogg_stream_reset.html\
Chris@1: 	ogg_stream_reset_serialno.html ogg_stream_state.html\
Chris@1: 	ogg_sync_buffer.html ogg_sync_clear.html ogg_sync_destroy.html\
Chris@1: 	ogg_sync_init.html ogg_sync_pageout.html ogg_sync_pageseek.html\
Chris@1: 	ogg_sync_reset.html ogg_sync_state.html ogg_sync_wrote.html\
Chris@1: 	oggpack_adv.html oggpack_adv1.html oggpack_bits.html\
Chris@1: 	oggpack_buffer.html oggpack_bytes.html oggpack_get_buffer.html\
Chris@1: 	oggpack_look.html oggpack_look1.html oggpack_read.html\
Chris@1: 	oggpack_read1.html oggpack_readinit.html oggpack_reset.html\
Chris@1: 	oggpack_write.html oggpack_writealign.html oggpack_writeclear.html\
Chris@1: 	oggpack_writecopy.html oggpack_writeinit.html oggpack_writetrunc.html\
Chris@1: 	overview.html reference.html style.css
Chris@1: 
Chris@1: EXTRA_DIST = $(doc_DATA)
Chris@1: all: all-am
Chris@1: 
Chris@1: .SUFFIXES:
Chris@1: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
Chris@1: 	@for dep in $?; do \
Chris@1: 	  case '$(am__configure_deps)' in \
Chris@1: 	    *$$dep*) \
Chris@1: 	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
Chris@1: 	        && { if test -f $@; then exit 0; else break; fi; }; \
Chris@1: 	      exit 1;; \
Chris@1: 	  esac; \
Chris@1: 	done; \
Chris@1: 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/libogg/Makefile'; \
Chris@1: 	$(am__cd) $(top_srcdir) && \
Chris@1: 	  $(AUTOMAKE) --gnu doc/libogg/Makefile
Chris@1: .PRECIOUS: Makefile
Chris@1: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
Chris@1: 	@case '$?' in \
Chris@1: 	  *config.status*) \
Chris@1: 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
Chris@1: 	  *) \
Chris@1: 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
Chris@1: 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
Chris@1: 	esac;
Chris@1: 
Chris@1: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
Chris@1: 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
Chris@1: 
Chris@1: $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
Chris@1: 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
Chris@1: $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
Chris@1: 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
Chris@1: $(am__aclocal_m4_deps):
Chris@1: 
Chris@1: mostlyclean-libtool:
Chris@1: 	-rm -f *.lo
Chris@1: 
Chris@1: clean-libtool:
Chris@1: 	-rm -rf .libs _libs
Chris@1: install-docDATA: $(doc_DATA)
Chris@1: 	@$(NORMAL_INSTALL)
Chris@1: 	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
Chris@1: 	@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
Chris@1: 	for p in $$list; do \
Chris@1: 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
Chris@1: 	  echo "$$d$$p"; \
Chris@1: 	done | $(am__base_list) | \
Chris@1: 	while read files; do \
Chris@1: 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
Chris@1: 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
Chris@1: 	done
Chris@1: 
Chris@1: uninstall-docDATA:
Chris@1: 	@$(NORMAL_UNINSTALL)
Chris@1: 	@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
Chris@1: 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
Chris@1: 	test -n "$$files" || exit 0; \
Chris@1: 	echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
Chris@1: 	cd "$(DESTDIR)$(docdir)" && rm -f $$files
Chris@1: tags: TAGS
Chris@1: TAGS:
Chris@1: 
Chris@1: ctags: CTAGS
Chris@1: CTAGS:
Chris@1: 
Chris@1: 
Chris@1: distdir: $(DISTFILES)
Chris@1: 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
Chris@1: 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
Chris@1: 	list='$(DISTFILES)'; \
Chris@1: 	  dist_files=`for file in $$list; do echo $$file; done | \
Chris@1: 	  sed -e "s|^$$srcdirstrip/||;t" \
Chris@1: 	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
Chris@1: 	case $$dist_files in \
Chris@1: 	  */*) $(MKDIR_P) `echo "$$dist_files" | \
Chris@1: 			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
Chris@1: 			   sort -u` ;; \
Chris@1: 	esac; \
Chris@1: 	for file in $$dist_files; do \
Chris@1: 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
Chris@1: 	  if test -d $$d/$$file; then \
Chris@1: 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
Chris@1: 	    if test -d "$(distdir)/$$file"; then \
Chris@1: 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
Chris@1: 	    fi; \
Chris@1: 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
Chris@1: 	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
Chris@1: 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
Chris@1: 	    fi; \
Chris@1: 	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
Chris@1: 	  else \
Chris@1: 	    test -f "$(distdir)/$$file" \
Chris@1: 	    || cp -p $$d/$$file "$(distdir)/$$file" \
Chris@1: 	    || exit 1; \
Chris@1: 	  fi; \
Chris@1: 	done
Chris@1: check-am: all-am
Chris@1: check: check-am
Chris@1: all-am: Makefile $(DATA)
Chris@1: installdirs:
Chris@1: 	for dir in "$(DESTDIR)$(docdir)"; do \
Chris@1: 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
Chris@1: 	done
Chris@1: install: install-am
Chris@1: install-exec: install-exec-am
Chris@1: install-data: install-data-am
Chris@1: uninstall: uninstall-am
Chris@1: 
Chris@1: install-am: all-am
Chris@1: 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
Chris@1: 
Chris@1: installcheck: installcheck-am
Chris@1: install-strip:
Chris@1: 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
Chris@1: 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
Chris@1: 	  `test -z '$(STRIP)' || \
Chris@1: 	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
Chris@1: mostlyclean-generic:
Chris@1: 
Chris@1: clean-generic:
Chris@1: 
Chris@1: distclean-generic:
Chris@1: 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
Chris@1: 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
Chris@1: 
Chris@1: maintainer-clean-generic:
Chris@1: 	@echo "This command is intended for maintainers to use"
Chris@1: 	@echo "it deletes files that may require special tools to rebuild."
Chris@1: clean: clean-am
Chris@1: 
Chris@1: clean-am: clean-generic clean-libtool mostlyclean-am
Chris@1: 
Chris@1: distclean: distclean-am
Chris@1: 	-rm -f Makefile
Chris@1: distclean-am: clean-am distclean-generic
Chris@1: 
Chris@1: dvi: dvi-am
Chris@1: 
Chris@1: dvi-am:
Chris@1: 
Chris@1: html: html-am
Chris@1: 
Chris@1: html-am:
Chris@1: 
Chris@1: info: info-am
Chris@1: 
Chris@1: info-am:
Chris@1: 
Chris@1: install-data-am: install-docDATA
Chris@1: 
Chris@1: install-dvi: install-dvi-am
Chris@1: 
Chris@1: install-dvi-am:
Chris@1: 
Chris@1: install-exec-am:
Chris@1: 
Chris@1: install-html: install-html-am
Chris@1: 
Chris@1: install-html-am:
Chris@1: 
Chris@1: install-info: install-info-am
Chris@1: 
Chris@1: install-info-am:
Chris@1: 
Chris@1: install-man:
Chris@1: 
Chris@1: install-pdf: install-pdf-am
Chris@1: 
Chris@1: install-pdf-am:
Chris@1: 
Chris@1: install-ps: install-ps-am
Chris@1: 
Chris@1: install-ps-am:
Chris@1: 
Chris@1: installcheck-am:
Chris@1: 
Chris@1: maintainer-clean: maintainer-clean-am
Chris@1: 	-rm -f Makefile
Chris@1: maintainer-clean-am: distclean-am maintainer-clean-generic
Chris@1: 
Chris@1: mostlyclean: mostlyclean-am
Chris@1: 
Chris@1: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
Chris@1: 
Chris@1: pdf: pdf-am
Chris@1: 
Chris@1: pdf-am:
Chris@1: 
Chris@1: ps: ps-am
Chris@1: 
Chris@1: ps-am:
Chris@1: 
Chris@1: uninstall-am: uninstall-docDATA
Chris@1: 
Chris@1: .MAKE: install-am install-strip
Chris@1: 
Chris@1: .PHONY: all all-am check check-am clean clean-generic clean-libtool \
Chris@1: 	distclean distclean-generic distclean-libtool distdir dvi \
Chris@1: 	dvi-am html html-am info info-am install install-am \
Chris@1: 	install-data install-data-am install-docDATA install-dvi \
Chris@1: 	install-dvi-am install-exec install-exec-am install-html \
Chris@1: 	install-html-am install-info install-info-am install-man \
Chris@1: 	install-pdf install-pdf-am install-ps install-ps-am \
Chris@1: 	install-strip installcheck installcheck-am installdirs \
Chris@1: 	maintainer-clean maintainer-clean-generic mostlyclean \
Chris@1: 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
Chris@1: 	uninstall uninstall-am uninstall-docDATA
Chris@1: 
Chris@1: 
Chris@1: # Tell versions [3.59,3.63) of GNU make to not export all variables.
Chris@1: # Otherwise a system limit (for SysV at least) may be exceeded.
Chris@1: .NOEXPORT: