Chris@1: # Makefile.in generated by automake 1.11.1 from Makefile.am.
Chris@1: # @configure_input@
Chris@1: 
Chris@1: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
Chris@1: # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
Chris@1: # Inc.
Chris@1: # This Makefile.in is free software; the Free Software Foundation
Chris@1: # gives unlimited permission to copy and/or distribute it,
Chris@1: # with or without modifications, as long as this notice is preserved.
Chris@1: 
Chris@1: # This program is distributed in the hope that it will be useful,
Chris@1: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
Chris@1: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
Chris@1: # PARTICULAR PURPOSE.
Chris@1: 
Chris@1: @SET_MAKE@
Chris@1: 
Chris@1: VPATH = @srcdir@
Chris@1: pkgdatadir = $(datadir)/@PACKAGE@
Chris@1: pkgincludedir = $(includedir)/@PACKAGE@
Chris@1: pkglibdir = $(libdir)/@PACKAGE@
Chris@1: pkglibexecdir = $(libexecdir)/@PACKAGE@
Chris@1: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
Chris@1: install_sh_DATA = $(install_sh) -c -m 644
Chris@1: install_sh_PROGRAM = $(install_sh) -c
Chris@1: install_sh_SCRIPT = $(install_sh) -c
Chris@1: INSTALL_HEADER = $(INSTALL_DATA)
Chris@1: transform = $(program_transform_name)
Chris@1: NORMAL_INSTALL = :
Chris@1: PRE_INSTALL = :
Chris@1: POST_INSTALL = :
Chris@1: NORMAL_UNINSTALL = :
Chris@1: PRE_UNINSTALL = :
Chris@1: POST_UNINSTALL = :
Chris@1: build_triplet = @build@
Chris@1: host_triplet = @host@
Chris@1: target_triplet = @target@
Chris@1: subdir = doc
Chris@1: DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \
Chris@1: 	$(srcdir)/Makefile.in
Chris@1: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
Chris@1: am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \
Chris@1: 	$(top_srcdir)/m4/ogg.m4 $(top_srcdir)/m4/pkg.m4 \
Chris@1: 	$(top_srcdir)/configure.ac
Chris@1: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
Chris@1: 	$(ACLOCAL_M4)
Chris@1: mkinstalldirs = $(install_sh) -d
Chris@1: CONFIG_HEADER = $(top_builddir)/config.h
Chris@1: CONFIG_CLEAN_FILES = Doxyfile
Chris@1: CONFIG_CLEAN_VPATH_FILES =
Chris@1: SOURCES =
Chris@1: DIST_SOURCES =
Chris@1: RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
Chris@1: 	html-recursive info-recursive install-data-recursive \
Chris@1: 	install-dvi-recursive install-exec-recursive \
Chris@1: 	install-html-recursive install-info-recursive \
Chris@1: 	install-pdf-recursive install-ps-recursive install-recursive \
Chris@1: 	installcheck-recursive installdirs-recursive pdf-recursive \
Chris@1: 	ps-recursive uninstall-recursive
Chris@1: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
Chris@1: am__vpath_adj = case $$p in \
Chris@1:     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
Chris@1:     *) f=$$p;; \
Chris@1:   esac;
Chris@1: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
Chris@1: am__install_max = 40
Chris@1: am__nobase_strip_setup = \
Chris@1:   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
Chris@1: am__nobase_strip = \
Chris@1:   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
Chris@1: am__nobase_list = $(am__nobase_strip_setup); \
Chris@1:   for p in $$list; do echo "$$p $$p"; done | \
Chris@1:   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
Chris@1:   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
Chris@1:     if (++n[$$2] == $(am__install_max)) \
Chris@1:       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
Chris@1:     END { for (dir in files) print dir, files[dir] }'
Chris@1: am__base_list = \
Chris@1:   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
Chris@1:   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
Chris@1: am__installdirs = "$(DESTDIR)$(docdir)"
Chris@1: DATA = $(doc_DATA)
Chris@1: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
Chris@1:   distclean-recursive maintainer-clean-recursive
Chris@1: AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
Chris@1: 	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
Chris@1: 	distdir
Chris@1: ETAGS = etags
Chris@1: CTAGS = ctags
Chris@1: DIST_SUBDIRS = $(SUBDIRS)
Chris@1: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
Chris@1: am__relativize = \
Chris@1:   dir0=`pwd`; \
Chris@1:   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
Chris@1:   sed_rest='s,^[^/]*/*,,'; \
Chris@1:   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
Chris@1:   sed_butlast='s,/*[^/]*$$,,'; \
Chris@1:   while test -n "$$dir1"; do \
Chris@1:     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
Chris@1:     if test "$$first" != "."; then \
Chris@1:       if test "$$first" = ".."; then \
Chris@1:         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
Chris@1:         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
Chris@1:       else \
Chris@1:         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
Chris@1:         if test "$$first2" = "$$first"; then \
Chris@1:           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
Chris@1:         else \
Chris@1:           dir2="../$$dir2"; \
Chris@1:         fi; \
Chris@1:         dir0="$$dir0"/"$$first"; \
Chris@1:       fi; \
Chris@1:     fi; \
Chris@1:     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
Chris@1:   done; \
Chris@1:   reldir="$$dir2"
Chris@1: ACLOCAL = @ACLOCAL@
Chris@1: ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@
Chris@1: ALLOCA = @ALLOCA@
Chris@1: AMTAR = @AMTAR@
Chris@1: AR = @AR@
Chris@1: AS = @AS@
Chris@1: AUTOCONF = @AUTOCONF@
Chris@1: AUTOHEADER = @AUTOHEADER@
Chris@1: AUTOMAKE = @AUTOMAKE@
Chris@1: AWK = @AWK@
Chris@1: CC = @CC@
Chris@1: CCDEPMODE = @CCDEPMODE@
Chris@1: CFLAGS = @CFLAGS@
Chris@1: CPP = @CPP@
Chris@1: CPPFLAGS = @CPPFLAGS@
Chris@1: CYGPATH_W = @CYGPATH_W@
Chris@1: DEBUG = @DEBUG@
Chris@1: DEFS = @DEFS@
Chris@1: DEPDIR = @DEPDIR@
Chris@1: DLLTOOL = @DLLTOOL@
Chris@1: DSYMUTIL = @DSYMUTIL@
Chris@1: DUMPBIN = @DUMPBIN@
Chris@1: ECHO_C = @ECHO_C@
Chris@1: ECHO_N = @ECHO_N@
Chris@1: ECHO_T = @ECHO_T@
Chris@1: EGREP = @EGREP@
Chris@1: EXEEXT = @EXEEXT@
Chris@1: FGREP = @FGREP@
Chris@1: GREP = @GREP@
Chris@1: HAVE_DOXYGEN = @HAVE_DOXYGEN@
Chris@1: HTLATEX = @HTLATEX@
Chris@1: INSTALL = @INSTALL@
Chris@1: INSTALL_DATA = @INSTALL_DATA@
Chris@1: INSTALL_PROGRAM = @INSTALL_PROGRAM@
Chris@1: INSTALL_SCRIPT = @INSTALL_SCRIPT@
Chris@1: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
Chris@1: LD = @LD@
Chris@1: LDFLAGS = @LDFLAGS@
Chris@1: LIBOBJS = @LIBOBJS@
Chris@1: LIBS = @LIBS@
Chris@1: LIBTOOL = @LIBTOOL@
Chris@1: LIBTOOL_DEPS = @LIBTOOL_DEPS@
Chris@1: LIPO = @LIPO@
Chris@1: LN_S = @LN_S@
Chris@1: LTLIBOBJS = @LTLIBOBJS@
Chris@1: MAINT = @MAINT@
Chris@1: MAKEINFO = @MAKEINFO@
Chris@1: MANIFEST_TOOL = @MANIFEST_TOOL@
Chris@1: MKDIR_P = @MKDIR_P@
Chris@1: NM = @NM@
Chris@1: NMEDIT = @NMEDIT@
Chris@1: OBJDUMP = @OBJDUMP@
Chris@1: OBJEXT = @OBJEXT@
Chris@1: OGG_CFLAGS = @OGG_CFLAGS@
Chris@1: OGG_LIBS = @OGG_LIBS@
Chris@1: OTOOL = @OTOOL@
Chris@1: OTOOL64 = @OTOOL64@
Chris@1: PACKAGE = @PACKAGE@
Chris@1: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
Chris@1: PACKAGE_NAME = @PACKAGE_NAME@
Chris@1: PACKAGE_STRING = @PACKAGE_STRING@
Chris@1: PACKAGE_TARNAME = @PACKAGE_TARNAME@
Chris@1: PACKAGE_URL = @PACKAGE_URL@
Chris@1: PACKAGE_VERSION = @PACKAGE_VERSION@
Chris@1: PATH_SEPARATOR = @PATH_SEPARATOR@
Chris@1: PDFLATEX = @PDFLATEX@
Chris@1: PKG_CONFIG = @PKG_CONFIG@
Chris@1: PROFILE = @PROFILE@
Chris@1: RANLIB = @RANLIB@
Chris@1: SED = @SED@
Chris@1: SET_MAKE = @SET_MAKE@
Chris@1: SHELL = @SHELL@
Chris@1: STRIP = @STRIP@
Chris@1: VERSION = @VERSION@
Chris@1: VE_LIB_AGE = @VE_LIB_AGE@
Chris@1: VE_LIB_CURRENT = @VE_LIB_CURRENT@
Chris@1: VE_LIB_REVISION = @VE_LIB_REVISION@
Chris@1: VF_LIB_AGE = @VF_LIB_AGE@
Chris@1: VF_LIB_CURRENT = @VF_LIB_CURRENT@
Chris@1: VF_LIB_REVISION = @VF_LIB_REVISION@
Chris@1: VORBIS_LIBS = @VORBIS_LIBS@
Chris@1: V_LIB_AGE = @V_LIB_AGE@
Chris@1: V_LIB_CURRENT = @V_LIB_CURRENT@
Chris@1: V_LIB_REVISION = @V_LIB_REVISION@
Chris@1: abs_builddir = @abs_builddir@
Chris@1: abs_srcdir = @abs_srcdir@
Chris@1: abs_top_builddir = @abs_top_builddir@
Chris@1: abs_top_srcdir = @abs_top_srcdir@
Chris@1: ac_ct_AR = @ac_ct_AR@
Chris@1: ac_ct_CC = @ac_ct_CC@
Chris@1: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
Chris@1: am__include = @am__include@
Chris@1: am__leading_dot = @am__leading_dot@
Chris@1: am__quote = @am__quote@
Chris@1: am__tar = @am__tar@
Chris@1: am__untar = @am__untar@
Chris@1: bindir = @bindir@
Chris@1: build = @build@
Chris@1: build_alias = @build_alias@
Chris@1: build_cpu = @build_cpu@
Chris@1: build_os = @build_os@
Chris@1: build_vendor = @build_vendor@
Chris@1: builddir = @builddir@
Chris@1: datadir = @datadir@
Chris@1: datarootdir = @datarootdir@
Chris@1: docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION)
Chris@1: dvidir = @dvidir@
Chris@1: exec_prefix = @exec_prefix@
Chris@1: host = @host@
Chris@1: host_alias = @host_alias@
Chris@1: host_cpu = @host_cpu@
Chris@1: host_os = @host_os@
Chris@1: host_vendor = @host_vendor@
Chris@1: htmldir = @htmldir@
Chris@1: includedir = @includedir@
Chris@1: infodir = @infodir@
Chris@1: install_sh = @install_sh@
Chris@1: libdir = @libdir@
Chris@1: libexecdir = @libexecdir@
Chris@1: localedir = @localedir@
Chris@1: localstatedir = @localstatedir@
Chris@1: mandir = @mandir@
Chris@1: mkdir_p = @mkdir_p@
Chris@1: oldincludedir = @oldincludedir@
Chris@1: pdfdir = @pdfdir@
Chris@1: prefix = @prefix@
Chris@1: program_transform_name = @program_transform_name@
Chris@1: psdir = @psdir@
Chris@1: pthread_lib = @pthread_lib@
Chris@1: sbindir = @sbindir@
Chris@1: sharedstatedir = @sharedstatedir@
Chris@1: srcdir = @srcdir@
Chris@1: sysconfdir = @sysconfdir@
Chris@1: target = @target@
Chris@1: target_alias = @target_alias@
Chris@1: target_cpu = @target_cpu@
Chris@1: target_os = @target_os@
Chris@1: target_vendor = @target_vendor@
Chris@1: top_build_prefix = @top_build_prefix@
Chris@1: top_builddir = @top_builddir@
Chris@1: top_srcdir = @top_srcdir@
Chris@1: SUBDIRS = libvorbis vorbisfile vorbisenc
Chris@1: 
Chris@1: ### all of the static docs, commited to SVN and included as is
Chris@1: static_docs = \
Chris@1: 	rfc5215.xml \
Chris@1: 	rfc5215.txt \
Chris@1: 	eightphase.png \
Chris@1: 	evenlsp.png \
Chris@1: 	fish_xiph_org.png \
Chris@1: 	floor1_inverse_dB_table.html \
Chris@1: 	floorval.png \
Chris@1: 	fourphase.png \
Chris@1: 	framing.html \
Chris@1: 	helper.html \
Chris@1: 	index.html \
Chris@1: 	lspmap.png \
Chris@1: 	oddlsp.png \
Chris@1: 	oggstream.html \
Chris@1: 	programming.html \
Chris@1: 	squarepolar.png \
Chris@1: 	stereo.html \
Chris@1: 	stream.png \
Chris@1: 	v-comment.html \
Chris@1: 	vorbis-clip.txt \
Chris@1: 	vorbis-errors.txt \
Chris@1: 	vorbis-fidelity.html \
Chris@1: 	vorbis.html \
Chris@1: 	vorbisword2.png \
Chris@1: 	wait.png \
Chris@1: 	white-xifish.png
Chris@1: 
Chris@1: 
Chris@1: # bits needed by the spec
Chris@1: SPEC_PNG = \
Chris@1: 	components.png \
Chris@1: 	floor1-1.png \
Chris@1: 	floor1-2.png \
Chris@1: 	floor1-3.png \
Chris@1: 	floor1-4.png \
Chris@1: 	hufftree.png \
Chris@1: 	hufftree-under.png \
Chris@1: 	residue-pack.png \
Chris@1: 	residue2.png \
Chris@1: 	window1.png \
Chris@1: 	window2.png
Chris@1: 
Chris@1: SPEC_PDF = xifish.pdf
Chris@1: 
Chris@1: # FIXME: also needed here
Chris@1: #	white-xifish.png 
Chris@1: SPEC_TEX = \
Chris@1: 	Vorbis_I_spec.tex \
Chris@1: 	01-introduction.tex \
Chris@1: 	02-bitpacking.tex \
Chris@1: 	03-codebook.tex \
Chris@1: 	04-codec.tex   \
Chris@1: 	05-comment.tex \
Chris@1: 	06-floor0.tex  \
Chris@1: 	07-floor1.tex  \
Chris@1: 	08-residue.tex \
Chris@1: 	09-helper.tex  \
Chris@1: 	10-tables.tex  \
Chris@1: 	a1-encapsulation-ogg.tex \
Chris@1: 	a2-encapsulation-rtp.tex \
Chris@1: 	footer.tex
Chris@1: 
Chris@1: built_docs = Vorbis_I_spec.pdf Vorbis_I_spec.html Vorbis_I_spec.css
Chris@1: @BUILD_DOCS_FALSE@doc_DATA = $(static_docs) doxygen-build.stamp
Chris@1: 
Chris@1: # conditionally make the generated documentation
Chris@1: @BUILD_DOCS_TRUE@doc_DATA = $(static_docs) $(SPEC_PNG) $(built_docs) doxygen-build.stamp
Chris@1: EXTRA_DIST = $(static_docs) $(built_docs) \
Chris@1: 	$(SPEC_TEX) $(SPEC_PNG) $(SPEC_PDF) Vorbis_I_spec.cfg Doxyfile.in
Chris@1: 
Chris@1: 
Chris@1: # these are expensive; only remove if we have to
Chris@1: MAINTAINERCLEANFILES = $(built_docs)
Chris@1: CLEANFILES = $(SPEC_TEX:%.tex=%.aux) \
Chris@1: 	     Vorbis_I_spec.4ct Vorbis_I_spec.4tc \
Chris@1: 	     Vorbis_I_spec.dvi Vorbis_I_spec.idv \
Chris@1: 	     Vorbis_I_spec.lg  Vorbis_I_spec.log \
Chris@1: 	     Vorbis_I_spec.out Vorbis_I_spec.tmp \
Chris@1: 	     Vorbis_I_spec.toc Vorbis_I_spec.xref \
Chris@1: 	     Vorbis_I_spec*.png \
Chris@1: 	     zzVorbis_I_spec.ps xifish.png
Chris@1: 
Chris@1: DISTCLEANFILES = $(built_docs)
Chris@1: all: all-recursive
Chris@1: 
Chris@1: .SUFFIXES:
Chris@1: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
Chris@1: 	@for dep in $?; do \
Chris@1: 	  case '$(am__configure_deps)' in \
Chris@1: 	    *$$dep*) \
Chris@1: 	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
Chris@1: 	        && { if test -f $@; then exit 0; else break; fi; }; \
Chris@1: 	      exit 1;; \
Chris@1: 	  esac; \
Chris@1: 	done; \
Chris@1: 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
Chris@1: 	$(am__cd) $(top_srcdir) && \
Chris@1: 	  $(AUTOMAKE) --gnu doc/Makefile
Chris@1: .PRECIOUS: Makefile
Chris@1: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
Chris@1: 	@case '$?' in \
Chris@1: 	  *config.status*) \
Chris@1: 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
Chris@1: 	  *) \
Chris@1: 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
Chris@1: 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
Chris@1: 	esac;
Chris@1: 
Chris@1: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
Chris@1: 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
Chris@1: 
Chris@1: $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
Chris@1: 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
Chris@1: $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
Chris@1: 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
Chris@1: $(am__aclocal_m4_deps):
Chris@1: Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
Chris@1: 	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
Chris@1: 
Chris@1: mostlyclean-libtool:
Chris@1: 	-rm -f *.lo
Chris@1: 
Chris@1: clean-libtool:
Chris@1: 	-rm -rf .libs _libs
Chris@1: install-docDATA: $(doc_DATA)
Chris@1: 	@$(NORMAL_INSTALL)
Chris@1: 	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
Chris@1: 	@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
Chris@1: 	for p in $$list; do \
Chris@1: 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
Chris@1: 	  echo "$$d$$p"; \
Chris@1: 	done | $(am__base_list) | \
Chris@1: 	while read files; do \
Chris@1: 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
Chris@1: 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
Chris@1: 	done
Chris@1: 
Chris@1: uninstall-docDATA:
Chris@1: 	@$(NORMAL_UNINSTALL)
Chris@1: 	@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
Chris@1: 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
Chris@1: 	test -n "$$files" || exit 0; \
Chris@1: 	echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
Chris@1: 	cd "$(DESTDIR)$(docdir)" && rm -f $$files
Chris@1: 
Chris@1: # This directory's subdirectories are mostly independent; you can cd
Chris@1: # into them and run `make' without going through this Makefile.
Chris@1: # To change the values of `make' variables: instead of editing Makefiles,
Chris@1: # (1) if the variable is set in `config.status', edit `config.status'
Chris@1: #     (which will cause the Makefiles to be regenerated when you run `make');
Chris@1: # (2) otherwise, pass the desired values on the `make' command line.
Chris@1: $(RECURSIVE_TARGETS):
Chris@1: 	@fail= failcom='exit 1'; \
Chris@1: 	for f in x $$MAKEFLAGS; do \
Chris@1: 	  case $$f in \
Chris@1: 	    *=* | --[!k]*);; \
Chris@1: 	    *k*) failcom='fail=yes';; \
Chris@1: 	  esac; \
Chris@1: 	done; \
Chris@1: 	dot_seen=no; \
Chris@1: 	target=`echo $@ | sed s/-recursive//`; \
Chris@1: 	list='$(SUBDIRS)'; for subdir in $$list; do \
Chris@1: 	  echo "Making $$target in $$subdir"; \
Chris@1: 	  if test "$$subdir" = "."; then \
Chris@1: 	    dot_seen=yes; \
Chris@1: 	    local_target="$$target-am"; \
Chris@1: 	  else \
Chris@1: 	    local_target="$$target"; \
Chris@1: 	  fi; \
Chris@1: 	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
Chris@1: 	  || eval $$failcom; \
Chris@1: 	done; \
Chris@1: 	if test "$$dot_seen" = "no"; then \
Chris@1: 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
Chris@1: 	fi; test -z "$$fail"
Chris@1: 
Chris@1: $(RECURSIVE_CLEAN_TARGETS):
Chris@1: 	@fail= failcom='exit 1'; \
Chris@1: 	for f in x $$MAKEFLAGS; do \
Chris@1: 	  case $$f in \
Chris@1: 	    *=* | --[!k]*);; \
Chris@1: 	    *k*) failcom='fail=yes';; \
Chris@1: 	  esac; \
Chris@1: 	done; \
Chris@1: 	dot_seen=no; \
Chris@1: 	case "$@" in \
Chris@1: 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
Chris@1: 	  *) list='$(SUBDIRS)' ;; \
Chris@1: 	esac; \
Chris@1: 	rev=''; for subdir in $$list; do \
Chris@1: 	  if test "$$subdir" = "."; then :; else \
Chris@1: 	    rev="$$subdir $$rev"; \
Chris@1: 	  fi; \
Chris@1: 	done; \
Chris@1: 	rev="$$rev ."; \
Chris@1: 	target=`echo $@ | sed s/-recursive//`; \
Chris@1: 	for subdir in $$rev; do \
Chris@1: 	  echo "Making $$target in $$subdir"; \
Chris@1: 	  if test "$$subdir" = "."; then \
Chris@1: 	    local_target="$$target-am"; \
Chris@1: 	  else \
Chris@1: 	    local_target="$$target"; \
Chris@1: 	  fi; \
Chris@1: 	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
Chris@1: 	  || eval $$failcom; \
Chris@1: 	done && test -z "$$fail"
Chris@1: tags-recursive:
Chris@1: 	list='$(SUBDIRS)'; for subdir in $$list; do \
Chris@1: 	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
Chris@1: 	done
Chris@1: ctags-recursive:
Chris@1: 	list='$(SUBDIRS)'; for subdir in $$list; do \
Chris@1: 	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
Chris@1: 	done
Chris@1: 
Chris@1: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
Chris@1: 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
Chris@1: 	unique=`for i in $$list; do \
Chris@1: 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
Chris@1: 	  done | \
Chris@1: 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
Chris@1: 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
Chris@1: 	mkid -fID $$unique
Chris@1: tags: TAGS
Chris@1: 
Chris@1: TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
Chris@1: 		$(TAGS_FILES) $(LISP)
Chris@1: 	set x; \
Chris@1: 	here=`pwd`; \
Chris@1: 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
Chris@1: 	  include_option=--etags-include; \
Chris@1: 	  empty_fix=.; \
Chris@1: 	else \
Chris@1: 	  include_option=--include; \
Chris@1: 	  empty_fix=; \
Chris@1: 	fi; \
Chris@1: 	list='$(SUBDIRS)'; for subdir in $$list; do \
Chris@1: 	  if test "$$subdir" = .; then :; else \
Chris@1: 	    test ! -f $$subdir/TAGS || \
Chris@1: 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
Chris@1: 	  fi; \
Chris@1: 	done; \
Chris@1: 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
Chris@1: 	unique=`for i in $$list; do \
Chris@1: 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
Chris@1: 	  done | \
Chris@1: 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
Chris@1: 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
Chris@1: 	shift; \
Chris@1: 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
Chris@1: 	  test -n "$$unique" || unique=$$empty_fix; \
Chris@1: 	  if test $$# -gt 0; then \
Chris@1: 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
Chris@1: 	      "$$@" $$unique; \
Chris@1: 	  else \
Chris@1: 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
Chris@1: 	      $$unique; \
Chris@1: 	  fi; \
Chris@1: 	fi
Chris@1: ctags: CTAGS
Chris@1: CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
Chris@1: 		$(TAGS_FILES) $(LISP)
Chris@1: 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
Chris@1: 	unique=`for i in $$list; do \
Chris@1: 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
Chris@1: 	  done | \
Chris@1: 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
Chris@1: 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
Chris@1: 	test -z "$(CTAGS_ARGS)$$unique" \
Chris@1: 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
Chris@1: 	     $$unique
Chris@1: 
Chris@1: GTAGS:
Chris@1: 	here=`$(am__cd) $(top_builddir) && pwd` \
Chris@1: 	  && $(am__cd) $(top_srcdir) \
Chris@1: 	  && gtags -i $(GTAGS_ARGS) "$$here"
Chris@1: 
Chris@1: distclean-tags:
Chris@1: 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
Chris@1: 
Chris@1: distdir: $(DISTFILES)
Chris@1: 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
Chris@1: 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
Chris@1: 	list='$(DISTFILES)'; \
Chris@1: 	  dist_files=`for file in $$list; do echo $$file; done | \
Chris@1: 	  sed -e "s|^$$srcdirstrip/||;t" \
Chris@1: 	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
Chris@1: 	case $$dist_files in \
Chris@1: 	  */*) $(MKDIR_P) `echo "$$dist_files" | \
Chris@1: 			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
Chris@1: 			   sort -u` ;; \
Chris@1: 	esac; \
Chris@1: 	for file in $$dist_files; do \
Chris@1: 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
Chris@1: 	  if test -d $$d/$$file; then \
Chris@1: 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
Chris@1: 	    if test -d "$(distdir)/$$file"; then \
Chris@1: 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
Chris@1: 	    fi; \
Chris@1: 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
Chris@1: 	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
Chris@1: 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
Chris@1: 	    fi; \
Chris@1: 	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
Chris@1: 	  else \
Chris@1: 	    test -f "$(distdir)/$$file" \
Chris@1: 	    || cp -p $$d/$$file "$(distdir)/$$file" \
Chris@1: 	    || exit 1; \
Chris@1: 	  fi; \
Chris@1: 	done
Chris@1: 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
Chris@1: 	  if test "$$subdir" = .; then :; else \
Chris@1: 	    test -d "$(distdir)/$$subdir" \
Chris@1: 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
Chris@1: 	    || exit 1; \
Chris@1: 	  fi; \
Chris@1: 	done
Chris@1: 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
Chris@1: 	  if test "$$subdir" = .; then :; else \
Chris@1: 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
Chris@1: 	    $(am__relativize); \
Chris@1: 	    new_distdir=$$reldir; \
Chris@1: 	    dir1=$$subdir; dir2="$(top_distdir)"; \
Chris@1: 	    $(am__relativize); \
Chris@1: 	    new_top_distdir=$$reldir; \
Chris@1: 	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
Chris@1: 	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
Chris@1: 	    ($(am__cd) $$subdir && \
Chris@1: 	      $(MAKE) $(AM_MAKEFLAGS) \
Chris@1: 	        top_distdir="$$new_top_distdir" \
Chris@1: 	        distdir="$$new_distdir" \
Chris@1: 		am__remove_distdir=: \
Chris@1: 		am__skip_length_check=: \
Chris@1: 		am__skip_mode_fix=: \
Chris@1: 	        distdir) \
Chris@1: 	      || exit 1; \
Chris@1: 	  fi; \
Chris@1: 	done
Chris@1: check-am: all-am
Chris@1: check: check-recursive
Chris@1: all-am: Makefile $(DATA)
Chris@1: installdirs: installdirs-recursive
Chris@1: installdirs-am:
Chris@1: 	for dir in "$(DESTDIR)$(docdir)"; do \
Chris@1: 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
Chris@1: 	done
Chris@1: install: install-recursive
Chris@1: install-exec: install-exec-recursive
Chris@1: install-data: install-data-recursive
Chris@1: uninstall: uninstall-recursive
Chris@1: 
Chris@1: install-am: all-am
Chris@1: 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
Chris@1: 
Chris@1: installcheck: installcheck-recursive
Chris@1: install-strip:
Chris@1: 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
Chris@1: 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
Chris@1: 	  `test -z '$(STRIP)' || \
Chris@1: 	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
Chris@1: mostlyclean-generic:
Chris@1: 
Chris@1: clean-generic:
Chris@1: 	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
Chris@1: 
Chris@1: distclean-generic:
Chris@1: 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
Chris@1: 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
Chris@1: 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
Chris@1: 
Chris@1: maintainer-clean-generic:
Chris@1: 	@echo "This command is intended for maintainers to use"
Chris@1: 	@echo "it deletes files that may require special tools to rebuild."
Chris@1: 	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
Chris@1: clean: clean-recursive
Chris@1: 
Chris@1: clean-am: clean-generic clean-libtool clean-local mostlyclean-am
Chris@1: 
Chris@1: distclean: distclean-recursive
Chris@1: 	-rm -f Makefile
Chris@1: distclean-am: clean-am distclean-generic distclean-tags
Chris@1: 
Chris@1: dvi: dvi-recursive
Chris@1: 
Chris@1: dvi-am:
Chris@1: 
Chris@1: html: html-recursive
Chris@1: 
Chris@1: html-am:
Chris@1: 
Chris@1: info: info-recursive
Chris@1: 
Chris@1: info-am:
Chris@1: 
Chris@1: install-data-am: install-data-local install-docDATA
Chris@1: 
Chris@1: install-dvi: install-dvi-recursive
Chris@1: 
Chris@1: install-dvi-am:
Chris@1: 
Chris@1: install-exec-am:
Chris@1: 
Chris@1: install-html: install-html-recursive
Chris@1: 
Chris@1: install-html-am:
Chris@1: 
Chris@1: install-info: install-info-recursive
Chris@1: 
Chris@1: install-info-am:
Chris@1: 
Chris@1: install-man:
Chris@1: 
Chris@1: install-pdf: install-pdf-recursive
Chris@1: 
Chris@1: install-pdf-am:
Chris@1: 
Chris@1: install-ps: install-ps-recursive
Chris@1: 
Chris@1: install-ps-am:
Chris@1: 
Chris@1: installcheck-am:
Chris@1: 
Chris@1: maintainer-clean: maintainer-clean-recursive
Chris@1: 	-rm -f Makefile
Chris@1: maintainer-clean-am: distclean-am maintainer-clean-generic
Chris@1: 
Chris@1: mostlyclean: mostlyclean-recursive
Chris@1: 
Chris@1: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
Chris@1: 
Chris@1: pdf: pdf-recursive
Chris@1: 
Chris@1: pdf-am:
Chris@1: 
Chris@1: ps: ps-recursive
Chris@1: 
Chris@1: ps-am:
Chris@1: 
Chris@1: uninstall-am: uninstall-docDATA uninstall-local
Chris@1: 
Chris@1: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
Chris@1: 	install-am install-strip tags-recursive
Chris@1: 
Chris@1: .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
Chris@1: 	all all-am check check-am clean clean-generic clean-libtool \
Chris@1: 	clean-local ctags ctags-recursive distclean distclean-generic \
Chris@1: 	distclean-libtool distclean-tags distdir dvi dvi-am html \
Chris@1: 	html-am info info-am install install-am install-data \
Chris@1: 	install-data-am install-data-local install-docDATA install-dvi \
Chris@1: 	install-dvi-am install-exec install-exec-am install-html \
Chris@1: 	install-html-am install-info install-info-am install-man \
Chris@1: 	install-pdf install-pdf-am install-ps install-ps-am \
Chris@1: 	install-strip installcheck installcheck-am installdirs \
Chris@1: 	installdirs-am maintainer-clean maintainer-clean-generic \
Chris@1: 	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
Chris@1: 	ps ps-am tags tags-recursive uninstall uninstall-am \
Chris@1: 	uninstall-docDATA uninstall-local
Chris@1: 
Chris@1: 
Chris@1: # explicit rules for generating docs
Chris@1: @BUILD_DOCS_TRUE@xifish.png: white-xifish.png
Chris@1: @BUILD_DOCS_TRUE@	cp $< $@
Chris@1: 
Chris@1: @BUILD_DOCS_TRUE@Vorbis_I_spec.html Vorbis_I_spec.css: $(SPEC_TEX) $(SPEC_PNG) xifish.png
Chris@1: @BUILD_DOCS_TRUE@	htlatex $<
Chris@1: 
Chris@1: @BUILD_DOCS_TRUE@Vorbis_I_spec.pdf: $(SPEC_TEX) $(SPEC_PNG) xifish.png
Chris@1: @BUILD_DOCS_TRUE@	pdflatex $<
Chris@1: @BUILD_DOCS_TRUE@	pdflatex $<
Chris@1: @BUILD_DOCS_TRUE@	pdflatex $<
Chris@1: @BUILD_DOCS_FALSE@Vorbis_I_spec.html: NO_DOCS_ERROR
Chris@1: @BUILD_DOCS_FALSE@Vorbis_I_spec.pdf: NO_DOCS_ERROR
Chris@1: @BUILD_DOCS_FALSE@NO_DOCS_ERROR:
Chris@1: @BUILD_DOCS_FALSE@	@echo
Chris@1: @BUILD_DOCS_FALSE@	@echo "*** Documentation has not been built! ***"
Chris@1: @BUILD_DOCS_FALSE@	@echo "Try re-running after passing --enable-docs to configure."
Chris@1: @BUILD_DOCS_FALSE@	@echo
Chris@1: 
Chris@1: @HAVE_DOXYGEN_TRUE@doxygen-build.stamp: Doxyfile $(top_srcdir)/include/vorbis/*.h
Chris@1: @HAVE_DOXYGEN_TRUE@	doxygen
Chris@1: @HAVE_DOXYGEN_TRUE@	touch doxygen-build.stamp
Chris@1: @HAVE_DOXYGEN_FALSE@doxygen-build.stamp:
Chris@1: @HAVE_DOXYGEN_FALSE@	echo "*** Warning: Doxygen not found; documentation will not be built."
Chris@1: @HAVE_DOXYGEN_FALSE@	touch doxygen-build.stamp
Chris@1: 
Chris@1: install-data-local: doxygen-build.stamp
Chris@1: 	$(mkinstalldirs) $(DESTDIR)$(docdir)
Chris@1: 	if test -d vorbis; then \
Chris@1: 	  for dir in vorbis/*; do \
Chris@1: 	    if test -d $$dir; then \
Chris@1: 	      b=`basename $$dir`; \
Chris@1: 	      $(mkinstalldirs) $(DESTDIR)$(docdir)/$$b; \
Chris@1: 	      for f in $$dir/*; do \
Chris@1: 		$(INSTALL_DATA) $$f $(DESTDIR)$(docdir)/$$b; \
Chris@1: 	      done \
Chris@1: 	    fi \
Chris@1: 	  done \
Chris@1: 	fi
Chris@1: 
Chris@1: uninstall-local:
Chris@1: 	rm -rf $(DESTDIR)$(docdir)
Chris@1: 
Chris@1: clean-local:
Chris@1: 	if test -d vorbis; then rm -rf vorbis; fi
Chris@1: 	if test -f doxygen-build.stamp; then rm -f doxygen-build.stamp; fi
Chris@1: 
Chris@1: # Tell versions [3.59,3.63) of GNU make to not export all variables.
Chris@1: # Otherwise a system limit (for SysV at least) may be exceeded.
Chris@1: .NOEXPORT: