Chris@41: # Makefile.in generated by automake 1.15 from Makefile.am.
Chris@41: # @configure_input@
Chris@41: 
Chris@41: # Copyright (C) 1994-2014 Free Software Foundation, Inc.
Chris@41: 
Chris@41: # This Makefile.in is free software; the Free Software Foundation
Chris@41: # gives unlimited permission to copy and/or distribute it,
Chris@41: # with or without modifications, as long as this notice is preserved.
Chris@41: 
Chris@41: # This program is distributed in the hope that it will be useful,
Chris@41: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
Chris@41: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
Chris@41: # PARTICULAR PURPOSE.
Chris@41: 
Chris@41: @SET_MAKE@
Chris@41: 
Chris@41: VPATH = @srcdir@
Chris@41: am__is_gnu_make = { \
Chris@41:   if test -z '$(MAKELEVEL)'; then \
Chris@41:     false; \
Chris@41:   elif test -n '$(MAKE_HOST)'; then \
Chris@41:     true; \
Chris@41:   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
Chris@41:     true; \
Chris@41:   else \
Chris@41:     false; \
Chris@41:   fi; \
Chris@41: }
Chris@41: am__make_running_with_option = \
Chris@41:   case $${target_option-} in \
Chris@41:       ?) ;; \
Chris@41:       *) echo "am__make_running_with_option: internal error: invalid" \
Chris@41:               "target option '$${target_option-}' specified" >&2; \
Chris@41:          exit 1;; \
Chris@41:   esac; \
Chris@41:   has_opt=no; \
Chris@41:   sane_makeflags=$$MAKEFLAGS; \
Chris@41:   if $(am__is_gnu_make); then \
Chris@41:     sane_makeflags=$$MFLAGS; \
Chris@41:   else \
Chris@41:     case $$MAKEFLAGS in \
Chris@41:       *\\[\ \	]*) \
Chris@41:         bs=\\; \
Chris@41:         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
Chris@41:           | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
Chris@41:     esac; \
Chris@41:   fi; \
Chris@41:   skip_next=no; \
Chris@41:   strip_trailopt () \
Chris@41:   { \
Chris@41:     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
Chris@41:   }; \
Chris@41:   for flg in $$sane_makeflags; do \
Chris@41:     test $$skip_next = yes && { skip_next=no; continue; }; \
Chris@41:     case $$flg in \
Chris@41:       *=*|--*) continue;; \
Chris@41:         -*I) strip_trailopt 'I'; skip_next=yes;; \
Chris@41:       -*I?*) strip_trailopt 'I';; \
Chris@41:         -*O) strip_trailopt 'O'; skip_next=yes;; \
Chris@41:       -*O?*) strip_trailopt 'O';; \
Chris@41:         -*l) strip_trailopt 'l'; skip_next=yes;; \
Chris@41:       -*l?*) strip_trailopt 'l';; \
Chris@41:       -[dEDm]) skip_next=yes;; \
Chris@41:       -[JT]) skip_next=yes;; \
Chris@41:     esac; \
Chris@41:     case $$flg in \
Chris@41:       *$$target_option*) has_opt=yes; break;; \
Chris@41:     esac; \
Chris@41:   done; \
Chris@41:   test $$has_opt = yes
Chris@41: am__make_dryrun = (target_option=n; $(am__make_running_with_option))
Chris@41: am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
Chris@41: pkgdatadir = $(datadir)/@PACKAGE@
Chris@41: pkgincludedir = $(includedir)/@PACKAGE@
Chris@41: pkglibdir = $(libdir)/@PACKAGE@
Chris@41: pkglibexecdir = $(libexecdir)/@PACKAGE@
Chris@41: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
Chris@41: install_sh_DATA = $(install_sh) -c -m 644
Chris@41: install_sh_PROGRAM = $(install_sh) -c
Chris@41: install_sh_SCRIPT = $(install_sh) -c
Chris@41: INSTALL_HEADER = $(INSTALL_DATA)
Chris@41: transform = $(program_transform_name)
Chris@41: NORMAL_INSTALL = :
Chris@41: PRE_INSTALL = :
Chris@41: POST_INSTALL = :
Chris@41: NORMAL_UNINSTALL = :
Chris@41: PRE_UNINSTALL = :
Chris@41: POST_UNINSTALL = :
Chris@41: build_triplet = @build@
Chris@41: host_triplet = @host@
Chris@41: target_triplet = @target@
Chris@41: subdir = .
Chris@41: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
Chris@41: am__aclocal_m4_deps = $(top_srcdir)/M4/check_signal.m4 \
Chris@41: 	$(top_srcdir)/M4/clip_mode.m4 $(top_srcdir)/M4/endian.m4 \
Chris@41: 	$(top_srcdir)/M4/libtool.m4 $(top_srcdir)/M4/lrint.m4 \
Chris@41: 	$(top_srcdir)/M4/lrintf.m4 $(top_srcdir)/M4/ltoptions.m4 \
Chris@41: 	$(top_srcdir)/M4/ltsugar.m4 $(top_srcdir)/M4/ltversion.m4 \
Chris@41: 	$(top_srcdir)/M4/lt~obsolete.m4 $(top_srcdir)/configure.ac
Chris@41: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
Chris@41: 	$(ACLOCAL_M4)
Chris@41: DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
Chris@41: 	$(am__configure_deps) $(am__DIST_COMMON)
Chris@41: am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
Chris@41:  configure.lineno config.status.lineno
Chris@41: mkinstalldirs = $(install_sh) -d
Chris@41: CONFIG_HEADER = $(top_builddir)/src/config.h
Chris@41: CONFIG_CLEAN_FILES = libsamplerate.spec samplerate.pc
Chris@41: CONFIG_CLEAN_VPATH_FILES =
Chris@41: AM_V_P = $(am__v_P_@AM_V@)
Chris@41: am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
Chris@41: am__v_P_0 = false
Chris@41: am__v_P_1 = :
Chris@41: AM_V_GEN = $(am__v_GEN_@AM_V@)
Chris@41: am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
Chris@41: am__v_GEN_0 = @echo "  GEN     " $@;
Chris@41: am__v_GEN_1 = 
Chris@41: AM_V_at = $(am__v_at_@AM_V@)
Chris@41: am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
Chris@41: am__v_at_0 = @
Chris@41: am__v_at_1 = 
Chris@41: SOURCES =
Chris@41: DIST_SOURCES =
Chris@41: RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
Chris@41: 	ctags-recursive dvi-recursive html-recursive info-recursive \
Chris@41: 	install-data-recursive install-dvi-recursive \
Chris@41: 	install-exec-recursive install-html-recursive \
Chris@41: 	install-info-recursive install-pdf-recursive \
Chris@41: 	install-ps-recursive install-recursive installcheck-recursive \
Chris@41: 	installdirs-recursive pdf-recursive ps-recursive \
Chris@41: 	tags-recursive uninstall-recursive
Chris@41: am__can_run_installinfo = \
Chris@41:   case $$AM_UPDATE_INFO_DIR in \
Chris@41:     n|no|NO) false;; \
Chris@41:     *) (install-info --version) >/dev/null 2>&1;; \
Chris@41:   esac
Chris@41: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
Chris@41: am__vpath_adj = case $$p in \
Chris@41:     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
Chris@41:     *) f=$$p;; \
Chris@41:   esac;
Chris@41: am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
Chris@41: am__install_max = 40
Chris@41: am__nobase_strip_setup = \
Chris@41:   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
Chris@41: am__nobase_strip = \
Chris@41:   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
Chris@41: am__nobase_list = $(am__nobase_strip_setup); \
Chris@41:   for p in $$list; do echo "$$p $$p"; done | \
Chris@41:   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
Chris@41:   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
Chris@41:     if (++n[$$2] == $(am__install_max)) \
Chris@41:       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
Chris@41:     END { for (dir in files) print dir, files[dir] }'
Chris@41: am__base_list = \
Chris@41:   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
Chris@41:   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
Chris@41: am__uninstall_files_from_dir = { \
Chris@41:   test -z "$$files" \
Chris@41:     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
Chris@41:     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
Chris@41:          $(am__cd) "$$dir" && rm -f $$files; }; \
Chris@41:   }
Chris@41: am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
Chris@41: DATA = $(pkgconfig_DATA)
Chris@41: RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
Chris@41:   distclean-recursive maintainer-clean-recursive
Chris@41: am__recursive_targets = \
Chris@41:   $(RECURSIVE_TARGETS) \
Chris@41:   $(RECURSIVE_CLEAN_TARGETS) \
Chris@41:   $(am__extra_recursive_targets)
Chris@41: AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
Chris@41: 	cscope distdir dist dist-all distcheck
Chris@41: am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
Chris@41: # Read a list of newline-separated strings from the standard input,
Chris@41: # and print each of them once, without duplicates.  Input order is
Chris@41: # *not* preserved.
Chris@41: am__uniquify_input = $(AWK) '\
Chris@41:   BEGIN { nonempty = 0; } \
Chris@41:   { items[$$0] = 1; nonempty = 1; } \
Chris@41:   END { if (nonempty) { for (i in items) print i; }; } \
Chris@41: '
Chris@41: # Make sure the list of sources is unique.  This is necessary because,
Chris@41: # e.g., the same source file might be shared among _SOURCES variables
Chris@41: # for different programs/libraries.
Chris@41: am__define_uniq_tagged_files = \
Chris@41:   list='$(am__tagged_files)'; \
Chris@41:   unique=`for i in $$list; do \
Chris@41:     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
Chris@41:   done | $(am__uniquify_input)`
Chris@41: ETAGS = etags
Chris@41: CTAGS = ctags
Chris@41: CSCOPE = cscope
Chris@41: am__DIST_COMMON = $(srcdir)/Makefile.in \
Chris@41: 	$(srcdir)/libsamplerate.spec.in $(srcdir)/samplerate.pc.in \
Chris@41: 	$(top_srcdir)/Cfg/compile $(top_srcdir)/Cfg/config.guess \
Chris@41: 	$(top_srcdir)/Cfg/config.sub $(top_srcdir)/Cfg/install-sh \
Chris@41: 	$(top_srcdir)/Cfg/ltmain.sh $(top_srcdir)/Cfg/missing AUTHORS \
Chris@41: 	COPYING Cfg/compile Cfg/config.guess Cfg/config.sub \
Chris@41: 	Cfg/depcomp Cfg/install-sh Cfg/ltmain.sh Cfg/missing ChangeLog \
Chris@41: 	INSTALL NEWS README
Chris@41: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
Chris@41: distdir = $(PACKAGE)-$(VERSION)
Chris@41: top_distdir = $(distdir)
Chris@41: am__remove_distdir = \
Chris@41:   if test -d "$(distdir)"; then \
Chris@41:     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
Chris@41:       && rm -rf "$(distdir)" \
Chris@41:       || { sleep 5 && rm -rf "$(distdir)"; }; \
Chris@41:   else :; fi
Chris@41: am__post_remove_distdir = $(am__remove_distdir)
Chris@41: am__relativize = \
Chris@41:   dir0=`pwd`; \
Chris@41:   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
Chris@41:   sed_rest='s,^[^/]*/*,,'; \
Chris@41:   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
Chris@41:   sed_butlast='s,/*[^/]*$$,,'; \
Chris@41:   while test -n "$$dir1"; do \
Chris@41:     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
Chris@41:     if test "$$first" != "."; then \
Chris@41:       if test "$$first" = ".."; then \
Chris@41:         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
Chris@41:         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
Chris@41:       else \
Chris@41:         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
Chris@41:         if test "$$first2" = "$$first"; then \
Chris@41:           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
Chris@41:         else \
Chris@41:           dir2="../$$dir2"; \
Chris@41:         fi; \
Chris@41:         dir0="$$dir0"/"$$first"; \
Chris@41:       fi; \
Chris@41:     fi; \
Chris@41:     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
Chris@41:   done; \
Chris@41:   reldir="$$dir2"
Chris@41: DIST_ARCHIVES = $(distdir).tar.gz
Chris@41: GZIP_ENV = --best
Chris@41: DIST_TARGETS = dist-gzip
Chris@41: distuninstallcheck_listfiles = find . -type f -print
Chris@41: am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
Chris@41:   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
Chris@41: distcleancheck_listfiles = find . -type f -print
Chris@41: ACLOCAL = @ACLOCAL@
Chris@41: ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@
Chris@41: ALSA_LIBS = @ALSA_LIBS@
Chris@41: AMTAR = @AMTAR@
Chris@41: AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
Chris@41: AR = @AR@
Chris@41: AUTOCONF = @AUTOCONF@
Chris@41: AUTOHEADER = @AUTOHEADER@
Chris@41: AUTOMAKE = @AUTOMAKE@
Chris@41: AWK = @AWK@
Chris@41: CC = @CC@
Chris@41: CCDEPMODE = @CCDEPMODE@
Chris@41: CFLAGS = @CFLAGS@
Chris@41: COMPILER_IS_GCC = @COMPILER_IS_GCC@
Chris@41: CPP = @CPP@
Chris@41: CPPFLAGS = @CPPFLAGS@
Chris@41: CXX = @CXX@
Chris@41: CXXCPP = @CXXCPP@
Chris@41: CXXDEPMODE = @CXXDEPMODE@
Chris@41: CXXFLAGS = @CXXFLAGS@
Chris@41: CYGPATH_W = @CYGPATH_W@
Chris@41: DEFS = @DEFS@
Chris@41: DEPDIR = @DEPDIR@
Chris@41: DLLTOOL = @DLLTOOL@
Chris@41: DLLWRAP = @DLLWRAP@
Chris@41: DSYMUTIL = @DSYMUTIL@
Chris@41: DUMPBIN = @DUMPBIN@
Chris@41: ECHO_C = @ECHO_C@
Chris@41: ECHO_N = @ECHO_N@
Chris@41: ECHO_T = @ECHO_T@
Chris@41: EGREP = @EGREP@
Chris@41: EXEEXT = @EXEEXT@
Chris@41: FFTW3_CFLAGS = @FFTW3_CFLAGS@
Chris@41: FFTW3_LIBS = @FFTW3_LIBS@
Chris@41: FGREP = @FGREP@
Chris@41: GCC_MAJOR_VERSION = @GCC_MAJOR_VERSION@
Chris@41: GREP = @GREP@
Chris@41: HAVE_FFTW3 = @HAVE_FFTW3@
Chris@41: HAVE_SNDFILE = @HAVE_SNDFILE@
Chris@41: INSTALL = @INSTALL@
Chris@41: INSTALL_DATA = @INSTALL_DATA@
Chris@41: INSTALL_PROGRAM = @INSTALL_PROGRAM@
Chris@41: INSTALL_SCRIPT = @INSTALL_SCRIPT@
Chris@41: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
Chris@41: LD = @LD@
Chris@41: LDFLAGS = @LDFLAGS@
Chris@41: LIBOBJS = @LIBOBJS@
Chris@41: LIBS = @LIBS@
Chris@41: LIBTOOL = @LIBTOOL@
Chris@41: LIPO = @LIPO@
Chris@41: LN_S = @LN_S@
Chris@41: LTLIBOBJS = @LTLIBOBJS@
Chris@41: LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
Chris@41: MAKEINFO = @MAKEINFO@
Chris@41: MANIFEST_TOOL = @MANIFEST_TOOL@
Chris@41: MKDIR_P = @MKDIR_P@
Chris@41: NM = @NM@
Chris@41: NMEDIT = @NMEDIT@
Chris@41: OBJDUMP = @OBJDUMP@
Chris@41: OBJEXT = @OBJEXT@
Chris@41: OS_SPECIFIC_INCLUDES = @OS_SPECIFIC_INCLUDES@
Chris@41: OS_SPECIFIC_LINKS = @OS_SPECIFIC_LINKS@
Chris@41: OTOOL = @OTOOL@
Chris@41: OTOOL64 = @OTOOL64@
Chris@41: PACKAGE = @PACKAGE@
Chris@41: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
Chris@41: PACKAGE_NAME = @PACKAGE_NAME@
Chris@41: PACKAGE_STRING = @PACKAGE_STRING@
Chris@41: PACKAGE_TARNAME = @PACKAGE_TARNAME@
Chris@41: PACKAGE_URL = @PACKAGE_URL@
Chris@41: PACKAGE_VERSION = @PACKAGE_VERSION@
Chris@41: PATH_SEPARATOR = @PATH_SEPARATOR@
Chris@41: PEXPORTS = @PEXPORTS@
Chris@41: PKG_CONFIG = @PKG_CONFIG@
Chris@41: PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
Chris@41: PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
Chris@41: RANLIB = @RANLIB@
Chris@41: RC = @RC@
Chris@41: SED = @SED@
Chris@41: SET_MAKE = @SET_MAKE@
Chris@41: SHARED_VERSION_INFO = @SHARED_VERSION_INFO@
Chris@41: SHELL = @SHELL@
Chris@41: SHLIB_VERSION_ARG = @SHLIB_VERSION_ARG@
Chris@41: SNDFILE_CFLAGS = @SNDFILE_CFLAGS@
Chris@41: SNDFILE_LIBS = @SNDFILE_LIBS@
Chris@41: STRIP = @STRIP@
Chris@41: VERSION = @VERSION@
Chris@41: abs_builddir = @abs_builddir@
Chris@41: abs_srcdir = @abs_srcdir@
Chris@41: abs_top_builddir = @abs_top_builddir@
Chris@41: abs_top_srcdir = @abs_top_srcdir@
Chris@41: ac_ct_AR = @ac_ct_AR@
Chris@41: ac_ct_CC = @ac_ct_CC@
Chris@41: ac_ct_CXX = @ac_ct_CXX@
Chris@41: ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
Chris@41: am__include = @am__include@
Chris@41: am__leading_dot = @am__leading_dot@
Chris@41: am__quote = @am__quote@
Chris@41: am__tar = @am__tar@
Chris@41: am__untar = @am__untar@
Chris@41: bindir = @bindir@
Chris@41: build = @build@
Chris@41: build_alias = @build_alias@
Chris@41: build_cpu = @build_cpu@
Chris@41: build_os = @build_os@
Chris@41: build_vendor = @build_vendor@
Chris@41: builddir = @builddir@
Chris@41: datadir = @datadir@
Chris@41: datarootdir = @datarootdir@
Chris@41: docdir = @docdir@
Chris@41: dvidir = @dvidir@
Chris@41: exec_prefix = @exec_prefix@
Chris@41: host = @host@
Chris@41: host_alias = @host_alias@
Chris@41: host_cpu = @host_cpu@
Chris@41: host_os = @host_os@
Chris@41: host_vendor = @host_vendor@
Chris@41: htmldir = @htmldir@
Chris@41: htmldocdir = @htmldocdir@
Chris@41: includedir = @includedir@
Chris@41: infodir = @infodir@
Chris@41: install_sh = @install_sh@
Chris@41: libdir = @libdir@
Chris@41: libexecdir = @libexecdir@
Chris@41: localedir = @localedir@
Chris@41: localstatedir = @localstatedir@
Chris@41: mandir = @mandir@
Chris@41: mkdir_p = @mkdir_p@
Chris@41: oldincludedir = @oldincludedir@
Chris@41: pdfdir = @pdfdir@
Chris@41: prefix = @prefix@
Chris@41: program_transform_name = @program_transform_name@
Chris@41: psdir = @psdir@
Chris@41: runstatedir = @runstatedir@
Chris@41: sbindir = @sbindir@
Chris@41: sharedstatedir = @sharedstatedir@
Chris@41: srcdir = @srcdir@
Chris@41: sysconfdir = @sysconfdir@
Chris@41: target = @target@
Chris@41: target_alias = @target_alias@
Chris@41: target_cpu = @target_cpu@
Chris@41: target_os = @target_os@
Chris@41: target_vendor = @target_vendor@
Chris@41: top_build_prefix = @top_build_prefix@
Chris@41: top_builddir = @top_builddir@
Chris@41: top_srcdir = @top_srcdir@
Chris@41: DISTCHECK_CONFIGURE_FLAGS = --enable-gcc-werror
Chris@41: SUBDIRS = M4 src doc examples tests
Chris@41: DIST_SUBDIRS = Win32 $(SUBDIRS)
Chris@41: EXTRA_DIST = autogen.sh libsamplerate.spec.in samplerate.pc.in Make.bat
Chris@41: pkgconfigdir = $(libdir)/pkgconfig
Chris@41: pkgconfig_DATA = samplerate.pc
Chris@41: m4datadir = $(datadir)/aclocal
Chris@41: all: all-recursive
Chris@41: 
Chris@41: .SUFFIXES:
Chris@41: am--refresh: Makefile
Chris@41: 	@:
Chris@41: $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
Chris@41: 	@for dep in $?; do \
Chris@41: 	  case '$(am__configure_deps)' in \
Chris@41: 	    *$$dep*) \
Chris@41: 	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
Chris@41: 	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
Chris@41: 		&& exit 0; \
Chris@41: 	      exit 1;; \
Chris@41: 	  esac; \
Chris@41: 	done; \
Chris@41: 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
Chris@41: 	$(am__cd) $(top_srcdir) && \
Chris@41: 	  $(AUTOMAKE) --gnu Makefile
Chris@41: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
Chris@41: 	@case '$?' in \
Chris@41: 	  *config.status*) \
Chris@41: 	    echo ' $(SHELL) ./config.status'; \
Chris@41: 	    $(SHELL) ./config.status;; \
Chris@41: 	  *) \
Chris@41: 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
Chris@41: 	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
Chris@41: 	esac;
Chris@41: 
Chris@41: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
Chris@41: 	$(SHELL) ./config.status --recheck
Chris@41: 
Chris@41: $(top_srcdir)/configure:  $(am__configure_deps)
Chris@41: 	$(am__cd) $(srcdir) && $(AUTOCONF)
Chris@41: $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
Chris@41: 	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
Chris@41: $(am__aclocal_m4_deps):
Chris@41: libsamplerate.spec: $(top_builddir)/config.status $(srcdir)/libsamplerate.spec.in
Chris@41: 	cd $(top_builddir) && $(SHELL) ./config.status $@
Chris@41: samplerate.pc: $(top_builddir)/config.status $(srcdir)/samplerate.pc.in
Chris@41: 	cd $(top_builddir) && $(SHELL) ./config.status $@
Chris@41: 
Chris@41: mostlyclean-libtool:
Chris@41: 	-rm -f *.lo
Chris@41: 
Chris@41: clean-libtool:
Chris@41: 	-rm -rf .libs _libs
Chris@41: 
Chris@41: distclean-libtool:
Chris@41: 	-rm -f libtool config.lt
Chris@41: install-pkgconfigDATA: $(pkgconfig_DATA)
Chris@41: 	@$(NORMAL_INSTALL)
Chris@41: 	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
Chris@41: 	if test -n "$$list"; then \
Chris@41: 	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
Chris@41: 	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
Chris@41: 	fi; \
Chris@41: 	for p in $$list; do \
Chris@41: 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
Chris@41: 	  echo "$$d$$p"; \
Chris@41: 	done | $(am__base_list) | \
Chris@41: 	while read files; do \
Chris@41: 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
Chris@41: 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
Chris@41: 	done
Chris@41: 
Chris@41: uninstall-pkgconfigDATA:
Chris@41: 	@$(NORMAL_UNINSTALL)
Chris@41: 	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
Chris@41: 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
Chris@41: 	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
Chris@41: 
Chris@41: # This directory's subdirectories are mostly independent; you can cd
Chris@41: # into them and run 'make' without going through this Makefile.
Chris@41: # To change the values of 'make' variables: instead of editing Makefiles,
Chris@41: # (1) if the variable is set in 'config.status', edit 'config.status'
Chris@41: #     (which will cause the Makefiles to be regenerated when you run 'make');
Chris@41: # (2) otherwise, pass the desired values on the 'make' command line.
Chris@41: $(am__recursive_targets):
Chris@41: 	@fail=; \
Chris@41: 	if $(am__make_keepgoing); then \
Chris@41: 	  failcom='fail=yes'; \
Chris@41: 	else \
Chris@41: 	  failcom='exit 1'; \
Chris@41: 	fi; \
Chris@41: 	dot_seen=no; \
Chris@41: 	target=`echo $@ | sed s/-recursive//`; \
Chris@41: 	case "$@" in \
Chris@41: 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
Chris@41: 	  *) list='$(SUBDIRS)' ;; \
Chris@41: 	esac; \
Chris@41: 	for subdir in $$list; do \
Chris@41: 	  echo "Making $$target in $$subdir"; \
Chris@41: 	  if test "$$subdir" = "."; then \
Chris@41: 	    dot_seen=yes; \
Chris@41: 	    local_target="$$target-am"; \
Chris@41: 	  else \
Chris@41: 	    local_target="$$target"; \
Chris@41: 	  fi; \
Chris@41: 	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
Chris@41: 	  || eval $$failcom; \
Chris@41: 	done; \
Chris@41: 	if test "$$dot_seen" = "no"; then \
Chris@41: 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
Chris@41: 	fi; test -z "$$fail"
Chris@41: 
Chris@41: ID: $(am__tagged_files)
Chris@41: 	$(am__define_uniq_tagged_files); mkid -fID $$unique
Chris@41: tags: tags-recursive
Chris@41: TAGS: tags
Chris@41: 
Chris@41: tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
Chris@41: 	set x; \
Chris@41: 	here=`pwd`; \
Chris@41: 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
Chris@41: 	  include_option=--etags-include; \
Chris@41: 	  empty_fix=.; \
Chris@41: 	else \
Chris@41: 	  include_option=--include; \
Chris@41: 	  empty_fix=; \
Chris@41: 	fi; \
Chris@41: 	list='$(SUBDIRS)'; for subdir in $$list; do \
Chris@41: 	  if test "$$subdir" = .; then :; else \
Chris@41: 	    test ! -f $$subdir/TAGS || \
Chris@41: 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
Chris@41: 	  fi; \
Chris@41: 	done; \
Chris@41: 	$(am__define_uniq_tagged_files); \
Chris@41: 	shift; \
Chris@41: 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
Chris@41: 	  test -n "$$unique" || unique=$$empty_fix; \
Chris@41: 	  if test $$# -gt 0; then \
Chris@41: 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
Chris@41: 	      "$$@" $$unique; \
Chris@41: 	  else \
Chris@41: 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
Chris@41: 	      $$unique; \
Chris@41: 	  fi; \
Chris@41: 	fi
Chris@41: ctags: ctags-recursive
Chris@41: 
Chris@41: CTAGS: ctags
Chris@41: ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
Chris@41: 	$(am__define_uniq_tagged_files); \
Chris@41: 	test -z "$(CTAGS_ARGS)$$unique" \
Chris@41: 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
Chris@41: 	     $$unique
Chris@41: 
Chris@41: GTAGS:
Chris@41: 	here=`$(am__cd) $(top_builddir) && pwd` \
Chris@41: 	  && $(am__cd) $(top_srcdir) \
Chris@41: 	  && gtags -i $(GTAGS_ARGS) "$$here"
Chris@41: cscope: cscope.files
Chris@41: 	test ! -s cscope.files \
Chris@41: 	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
Chris@41: clean-cscope:
Chris@41: 	-rm -f cscope.files
Chris@41: cscope.files: clean-cscope cscopelist
Chris@41: cscopelist: cscopelist-recursive
Chris@41: 
Chris@41: cscopelist-am: $(am__tagged_files)
Chris@41: 	list='$(am__tagged_files)'; \
Chris@41: 	case "$(srcdir)" in \
Chris@41: 	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
Chris@41: 	  *) sdir=$(subdir)/$(srcdir) ;; \
Chris@41: 	esac; \
Chris@41: 	for i in $$list; do \
Chris@41: 	  if test -f "$$i"; then \
Chris@41: 	    echo "$(subdir)/$$i"; \
Chris@41: 	  else \
Chris@41: 	    echo "$$sdir/$$i"; \
Chris@41: 	  fi; \
Chris@41: 	done >> $(top_builddir)/cscope.files
Chris@41: 
Chris@41: distclean-tags:
Chris@41: 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
Chris@41: 	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
Chris@41: 
Chris@41: distdir: $(DISTFILES)
Chris@41: 	$(am__remove_distdir)
Chris@41: 	test -d "$(distdir)" || mkdir "$(distdir)"
Chris@41: 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
Chris@41: 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
Chris@41: 	list='$(DISTFILES)'; \
Chris@41: 	  dist_files=`for file in $$list; do echo $$file; done | \
Chris@41: 	  sed -e "s|^$$srcdirstrip/||;t" \
Chris@41: 	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
Chris@41: 	case $$dist_files in \
Chris@41: 	  */*) $(MKDIR_P) `echo "$$dist_files" | \
Chris@41: 			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
Chris@41: 			   sort -u` ;; \
Chris@41: 	esac; \
Chris@41: 	for file in $$dist_files; do \
Chris@41: 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
Chris@41: 	  if test -d $$d/$$file; then \
Chris@41: 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
Chris@41: 	    if test -d "$(distdir)/$$file"; then \
Chris@41: 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
Chris@41: 	    fi; \
Chris@41: 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
Chris@41: 	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
Chris@41: 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
Chris@41: 	    fi; \
Chris@41: 	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
Chris@41: 	  else \
Chris@41: 	    test -f "$(distdir)/$$file" \
Chris@41: 	    || cp -p $$d/$$file "$(distdir)/$$file" \
Chris@41: 	    || exit 1; \
Chris@41: 	  fi; \
Chris@41: 	done
Chris@41: 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
Chris@41: 	  if test "$$subdir" = .; then :; else \
Chris@41: 	    $(am__make_dryrun) \
Chris@41: 	      || test -d "$(distdir)/$$subdir" \
Chris@41: 	      || $(MKDIR_P) "$(distdir)/$$subdir" \
Chris@41: 	      || exit 1; \
Chris@41: 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
Chris@41: 	    $(am__relativize); \
Chris@41: 	    new_distdir=$$reldir; \
Chris@41: 	    dir1=$$subdir; dir2="$(top_distdir)"; \
Chris@41: 	    $(am__relativize); \
Chris@41: 	    new_top_distdir=$$reldir; \
Chris@41: 	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
Chris@41: 	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
Chris@41: 	    ($(am__cd) $$subdir && \
Chris@41: 	      $(MAKE) $(AM_MAKEFLAGS) \
Chris@41: 	        top_distdir="$$new_top_distdir" \
Chris@41: 	        distdir="$$new_distdir" \
Chris@41: 		am__remove_distdir=: \
Chris@41: 		am__skip_length_check=: \
Chris@41: 		am__skip_mode_fix=: \
Chris@41: 	        distdir) \
Chris@41: 	      || exit 1; \
Chris@41: 	  fi; \
Chris@41: 	done
Chris@41: 	-test -n "$(am__skip_mode_fix)" \
Chris@41: 	|| find "$(distdir)" -type d ! -perm -755 \
Chris@41: 		-exec chmod u+rwx,go+rx {} \; -o \
Chris@41: 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
Chris@41: 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
Chris@41: 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
Chris@41: 	|| chmod -R a+r "$(distdir)"
Chris@41: dist-gzip: distdir
Chris@41: 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
Chris@41: 	$(am__post_remove_distdir)
Chris@41: 
Chris@41: dist-bzip2: distdir
Chris@41: 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
Chris@41: 	$(am__post_remove_distdir)
Chris@41: 
Chris@41: dist-lzip: distdir
Chris@41: 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
Chris@41: 	$(am__post_remove_distdir)
Chris@41: 
Chris@41: dist-xz: distdir
Chris@41: 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
Chris@41: 	$(am__post_remove_distdir)
Chris@41: 
Chris@41: dist-tarZ: distdir
Chris@41: 	@echo WARNING: "Support for distribution archives compressed with" \
Chris@41: 		       "legacy program 'compress' is deprecated." >&2
Chris@41: 	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
Chris@41: 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
Chris@41: 	$(am__post_remove_distdir)
Chris@41: 
Chris@41: dist-shar: distdir
Chris@41: 	@echo WARNING: "Support for shar distribution archives is" \
Chris@41: 	               "deprecated." >&2
Chris@41: 	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
Chris@41: 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
Chris@41: 	$(am__post_remove_distdir)
Chris@41: 
Chris@41: dist-zip: distdir
Chris@41: 	-rm -f $(distdir).zip
Chris@41: 	zip -rq $(distdir).zip $(distdir)
Chris@41: 	$(am__post_remove_distdir)
Chris@41: 
Chris@41: dist dist-all:
Chris@41: 	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
Chris@41: 	$(am__post_remove_distdir)
Chris@41: 
Chris@41: # This target untars the dist file and tries a VPATH configuration.  Then
Chris@41: # it guarantees that the distribution is self-contained by making another
Chris@41: # tarfile.
Chris@41: distcheck: dist
Chris@41: 	case '$(DIST_ARCHIVES)' in \
Chris@41: 	*.tar.gz*) \
Chris@41: 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
Chris@41: 	*.tar.bz2*) \
Chris@41: 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
Chris@41: 	*.tar.lz*) \
Chris@41: 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
Chris@41: 	*.tar.xz*) \
Chris@41: 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
Chris@41: 	*.tar.Z*) \
Chris@41: 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
Chris@41: 	*.shar.gz*) \
Chris@41: 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
Chris@41: 	*.zip*) \
Chris@41: 	  unzip $(distdir).zip ;;\
Chris@41: 	esac
Chris@41: 	chmod -R a-w $(distdir)
Chris@41: 	chmod u+w $(distdir)
Chris@41: 	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
Chris@41: 	chmod a-w $(distdir)
Chris@41: 	test -d $(distdir)/_build || exit 0; \
Chris@41: 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
Chris@41: 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
Chris@41: 	  && am__cwd=`pwd` \
Chris@41: 	  && $(am__cd) $(distdir)/_build/sub \
Chris@41: 	  && ../../configure \
Chris@41: 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
Chris@41: 	    $(DISTCHECK_CONFIGURE_FLAGS) \
Chris@41: 	    --srcdir=../.. --prefix="$$dc_install_base" \
Chris@41: 	  && $(MAKE) $(AM_MAKEFLAGS) \
Chris@41: 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
Chris@41: 	  && $(MAKE) $(AM_MAKEFLAGS) check \
Chris@41: 	  && $(MAKE) $(AM_MAKEFLAGS) install \
Chris@41: 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
Chris@41: 	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
Chris@41: 	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
Chris@41: 	        distuninstallcheck \
Chris@41: 	  && chmod -R a-w "$$dc_install_base" \
Chris@41: 	  && ({ \
Chris@41: 	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
Chris@41: 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
Chris@41: 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
Chris@41: 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
Chris@41: 	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
Chris@41: 	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
Chris@41: 	  && rm -rf "$$dc_destdir" \
Chris@41: 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
Chris@41: 	  && rm -rf $(DIST_ARCHIVES) \
Chris@41: 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
Chris@41: 	  && cd "$$am__cwd" \
Chris@41: 	  || exit 1
Chris@41: 	$(am__post_remove_distdir)
Chris@41: 	@(echo "$(distdir) archives ready for distribution: "; \
Chris@41: 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
Chris@41: 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
Chris@41: distuninstallcheck:
Chris@41: 	@test -n '$(distuninstallcheck_dir)' || { \
Chris@41: 	  echo 'ERROR: trying to run $@ with an empty' \
Chris@41: 	       '$$(distuninstallcheck_dir)' >&2; \
Chris@41: 	  exit 1; \
Chris@41: 	}; \
Chris@41: 	$(am__cd) '$(distuninstallcheck_dir)' || { \
Chris@41: 	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
Chris@41: 	  exit 1; \
Chris@41: 	}; \
Chris@41: 	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
Chris@41: 	   || { echo "ERROR: files left after uninstall:" ; \
Chris@41: 	        if test -n "$(DESTDIR)"; then \
Chris@41: 	          echo "  (check DESTDIR support)"; \
Chris@41: 	        fi ; \
Chris@41: 	        $(distuninstallcheck_listfiles) ; \
Chris@41: 	        exit 1; } >&2
Chris@41: distcleancheck: distclean
Chris@41: 	@if test '$(srcdir)' = . ; then \
Chris@41: 	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
Chris@41: 	  exit 1 ; \
Chris@41: 	fi
Chris@41: 	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
Chris@41: 	  || { echo "ERROR: files left in build directory after distclean:" ; \
Chris@41: 	       $(distcleancheck_listfiles) ; \
Chris@41: 	       exit 1; } >&2
Chris@41: check-am: all-am
Chris@41: check: check-recursive
Chris@41: all-am: Makefile $(DATA)
Chris@41: installdirs: installdirs-recursive
Chris@41: installdirs-am:
Chris@41: 	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
Chris@41: 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
Chris@41: 	done
Chris@41: install: install-recursive
Chris@41: install-exec: install-exec-recursive
Chris@41: install-data: install-data-recursive
Chris@41: uninstall: uninstall-recursive
Chris@41: 
Chris@41: install-am: all-am
Chris@41: 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
Chris@41: 
Chris@41: installcheck: installcheck-recursive
Chris@41: install-strip:
Chris@41: 	if test -z '$(STRIP)'; then \
Chris@41: 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
Chris@41: 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
Chris@41: 	      install; \
Chris@41: 	else \
Chris@41: 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
Chris@41: 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
Chris@41: 	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
Chris@41: 	fi
Chris@41: mostlyclean-generic:
Chris@41: 
Chris@41: clean-generic:
Chris@41: 
Chris@41: distclean-generic:
Chris@41: 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
Chris@41: 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
Chris@41: 
Chris@41: maintainer-clean-generic:
Chris@41: 	@echo "This command is intended for maintainers to use"
Chris@41: 	@echo "it deletes files that may require special tools to rebuild."
Chris@41: clean: clean-recursive
Chris@41: 
Chris@41: clean-am: clean-generic clean-libtool mostlyclean-am
Chris@41: 
Chris@41: distclean: distclean-recursive
Chris@41: 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
Chris@41: 	-rm -f Makefile
Chris@41: distclean-am: clean-am distclean-generic distclean-libtool \
Chris@41: 	distclean-tags
Chris@41: 
Chris@41: dvi: dvi-recursive
Chris@41: 
Chris@41: dvi-am:
Chris@41: 
Chris@41: html: html-recursive
Chris@41: 
Chris@41: html-am:
Chris@41: 
Chris@41: info: info-recursive
Chris@41: 
Chris@41: info-am:
Chris@41: 
Chris@41: install-data-am: install-pkgconfigDATA
Chris@41: 
Chris@41: install-dvi: install-dvi-recursive
Chris@41: 
Chris@41: install-dvi-am:
Chris@41: 
Chris@41: install-exec-am:
Chris@41: 
Chris@41: install-html: install-html-recursive
Chris@41: 
Chris@41: install-html-am:
Chris@41: 
Chris@41: install-info: install-info-recursive
Chris@41: 
Chris@41: install-info-am:
Chris@41: 
Chris@41: install-man:
Chris@41: 
Chris@41: install-pdf: install-pdf-recursive
Chris@41: 
Chris@41: install-pdf-am:
Chris@41: 
Chris@41: install-ps: install-ps-recursive
Chris@41: 
Chris@41: install-ps-am:
Chris@41: 
Chris@41: installcheck-am:
Chris@41: 
Chris@41: maintainer-clean: maintainer-clean-recursive
Chris@41: 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
Chris@41: 	-rm -rf $(top_srcdir)/autom4te.cache
Chris@41: 	-rm -f Makefile
Chris@41: maintainer-clean-am: distclean-am maintainer-clean-generic
Chris@41: 
Chris@41: mostlyclean: mostlyclean-recursive
Chris@41: 
Chris@41: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
Chris@41: 
Chris@41: pdf: pdf-recursive
Chris@41: 
Chris@41: pdf-am:
Chris@41: 
Chris@41: ps: ps-recursive
Chris@41: 
Chris@41: ps-am:
Chris@41: 
Chris@41: uninstall-am: uninstall-pkgconfigDATA
Chris@41: 
Chris@41: .MAKE: $(am__recursive_targets) install-am install-strip
Chris@41: 
Chris@41: .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
Chris@41: 	am--refresh check check-am clean clean-cscope clean-generic \
Chris@41: 	clean-libtool cscope cscopelist-am ctags ctags-am dist \
Chris@41: 	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
Chris@41: 	dist-xz dist-zip distcheck distclean distclean-generic \
Chris@41: 	distclean-libtool distclean-tags distcleancheck distdir \
Chris@41: 	distuninstallcheck dvi dvi-am html html-am info info-am \
Chris@41: 	install install-am install-data install-data-am install-dvi \
Chris@41: 	install-dvi-am install-exec install-exec-am install-html \
Chris@41: 	install-html-am install-info install-info-am install-man \
Chris@41: 	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
Chris@41: 	install-ps-am install-strip installcheck installcheck-am \
Chris@41: 	installdirs installdirs-am maintainer-clean \
Chris@41: 	maintainer-clean-generic mostlyclean mostlyclean-generic \
Chris@41: 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
Chris@41: 	uninstall-am uninstall-pkgconfigDATA
Chris@41: 
Chris@41: .PRECIOUS: Makefile
Chris@41: 
Chris@41: 
Chris@41: # Some people prefer "make test" to "make check".
Chris@41: 
Chris@41: test:
Chris@41: 	make check
Chris@41: 
Chris@41: check-asm :
Chris@41: 	(cd src && make check-asm)
Chris@41: 
Chris@41: # Tell versions [3.59,3.63) of GNU make to not export all variables.
Chris@41: # Otherwise a system limit (for SysV at least) may be exceeded.
Chris@41: .NOEXPORT: