Chris@1: # Makefile.in generated by automake 1.7.9 from Makefile.am.
Chris@1: # @configure_input@
Chris@1: 
Chris@1: # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Chris@1: # Free Software Foundation, Inc.
Chris@1: # This Makefile.in is free software; the Free Software Foundation
Chris@1: # gives unlimited permission to copy and/or distribute it,
Chris@1: # with or without modifications, as long as this notice is preserved.
Chris@1: 
Chris@1: # This program is distributed in the hope that it will be useful,
Chris@1: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
Chris@1: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
Chris@1: # PARTICULAR PURPOSE.
Chris@1: 
Chris@1: @SET_MAKE@
Chris@1: 
Chris@1: #  FLAC - Free Lossless Audio Codec
Chris@1: #  Copyright (C) 2001,2002,2003,2004,2005,2006,2007  Josh Coalson
Chris@1: #
Chris@1: #  This file is part the FLAC project.  FLAC is comprised of several
Chris@1: #  components distributed under difference licenses.  The codec libraries
Chris@1: #  are distributed under Xiph.Org's BSD-like license (see the file
Chris@1: #  COPYING.Xiph in this distribution).  All other programs, libraries, and
Chris@1: #  plugins are distributed under the GPL (see COPYING.GPL).  The documentation
Chris@1: #  is distributed under the Gnu FDL (see COPYING.FDL).  Each file in the
Chris@1: #  FLAC distribution contains at the top the terms under which it may be
Chris@1: #  distributed.
Chris@1: #
Chris@1: #  Since this particular file is relevant to all components of FLAC,
Chris@1: #  it may be distributed under the Xiph.Org license, which is the least
Chris@1: #  restrictive of those mentioned above.  See the file COPYING.Xiph in this
Chris@1: #  distribution.
Chris@1: 
Chris@1: #
Chris@1: # automake provides the following useful targets:
Chris@1: #
Chris@1: # all: build all programs and libraries using the current
Chris@1: # configuration (set by configure)
Chris@1: #
Chris@1: # check: build and run all self-tests
Chris@1: #
Chris@1: # clean: remove everything except what's required to build everything
Chris@1: #
Chris@1: # distclean: remove everything except what goes in the distribution
Chris@1: #
Chris@1: 
Chris@1: srcdir = @srcdir@
Chris@1: top_srcdir = @top_srcdir@
Chris@1: VPATH = @srcdir@
Chris@1: pkgdatadir = $(datadir)/@PACKAGE@
Chris@1: pkglibdir = $(libdir)/@PACKAGE@
Chris@1: pkgincludedir = $(includedir)/@PACKAGE@
Chris@1: top_builddir = .
Chris@1: 
Chris@1: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
Chris@1: INSTALL = @INSTALL@
Chris@1: install_sh_DATA = $(install_sh) -c -m 644
Chris@1: install_sh_PROGRAM = $(install_sh) -c
Chris@1: install_sh_SCRIPT = $(install_sh) -c
Chris@1: INSTALL_HEADER = $(INSTALL_DATA)
Chris@1: transform = $(program_transform_name)
Chris@1: NORMAL_INSTALL = :
Chris@1: PRE_INSTALL = :
Chris@1: POST_INSTALL = :
Chris@1: NORMAL_UNINSTALL = :
Chris@1: PRE_UNINSTALL = :
Chris@1: POST_UNINSTALL = :
Chris@1: host_triplet = @host@
Chris@1: ACLOCAL = @ACLOCAL@
Chris@1: ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@
Chris@1: AMDEP_FALSE = @AMDEP_FALSE@
Chris@1: AMDEP_TRUE = @AMDEP_TRUE@
Chris@1: AMTAR = @AMTAR@
Chris@1: AR = @AR@
Chris@1: AS = @AS@
Chris@1: AUTOCONF = @AUTOCONF@
Chris@1: AUTOHEADER = @AUTOHEADER@
Chris@1: AUTOMAKE = @AUTOMAKE@
Chris@1: AWK = @AWK@
Chris@1: CC = @CC@
Chris@1: CCAS = @CCAS@
Chris@1: CCASFLAGS = @CCASFLAGS@
Chris@1: CCDEPMODE = @CCDEPMODE@
Chris@1: CFLAGS = @CFLAGS@
Chris@1: CPP = @CPP@
Chris@1: CPPFLAGS = @CPPFLAGS@
Chris@1: CXX = @CXX@
Chris@1: CXXCPP = @CXXCPP@
Chris@1: CXXDEPMODE = @CXXDEPMODE@
Chris@1: CXXFLAGS = @CXXFLAGS@
Chris@1: CYGPATH_W = @CYGPATH_W@
Chris@1: DEBUG_FALSE = @DEBUG_FALSE@
Chris@1: DEBUG_TRUE = @DEBUG_TRUE@
Chris@1: DEFS = @DEFS@
Chris@1: DEPDIR = @DEPDIR@
Chris@1: DOCBOOK_TO_MAN = @DOCBOOK_TO_MAN@
Chris@1: DOXYGEN = @DOXYGEN@
Chris@1: ECHO = @ECHO@
Chris@1: ECHO_C = @ECHO_C@
Chris@1: ECHO_N = @ECHO_N@
Chris@1: ECHO_T = @ECHO_T@
Chris@1: EGREP = @EGREP@
Chris@1: EXEEXT = @EXEEXT@
Chris@1: F77 = @F77@
Chris@1: FFLAGS = @FFLAGS@
Chris@1: FLAC__TEST_LEVEL = @FLAC__TEST_LEVEL@
Chris@1: FLAC__TEST_WITH_VALGRIND = @FLAC__TEST_WITH_VALGRIND@
Chris@1: FLaC__CPU_IA32_FALSE = @FLaC__CPU_IA32_FALSE@
Chris@1: FLaC__CPU_IA32_TRUE = @FLaC__CPU_IA32_TRUE@
Chris@1: FLaC__CPU_PPC_FALSE = @FLaC__CPU_PPC_FALSE@
Chris@1: FLaC__CPU_PPC_TRUE = @FLaC__CPU_PPC_TRUE@
Chris@1: FLaC__CPU_SPARC_FALSE = @FLaC__CPU_SPARC_FALSE@
Chris@1: FLaC__CPU_SPARC_TRUE = @FLaC__CPU_SPARC_TRUE@
Chris@1: FLaC__HAS_AS_FALSE = @FLaC__HAS_AS_FALSE@
Chris@1: FLaC__HAS_AS_TRUE = @FLaC__HAS_AS_TRUE@
Chris@1: FLaC__HAS_AS__TEMPORARILY_DISABLED_FALSE = @FLaC__HAS_AS__TEMPORARILY_DISABLED_FALSE@
Chris@1: FLaC__HAS_AS__TEMPORARILY_DISABLED_TRUE = @FLaC__HAS_AS__TEMPORARILY_DISABLED_TRUE@
Chris@1: FLaC__HAS_DOCBOOK_TO_MAN_FALSE = @FLaC__HAS_DOCBOOK_TO_MAN_FALSE@
Chris@1: FLaC__HAS_DOCBOOK_TO_MAN_TRUE = @FLaC__HAS_DOCBOOK_TO_MAN_TRUE@
Chris@1: FLaC__HAS_DOXYGEN_FALSE = @FLaC__HAS_DOXYGEN_FALSE@
Chris@1: FLaC__HAS_DOXYGEN_TRUE = @FLaC__HAS_DOXYGEN_TRUE@
Chris@1: FLaC__HAS_GAS_FALSE = @FLaC__HAS_GAS_FALSE@
Chris@1: FLaC__HAS_GAS_TRUE = @FLaC__HAS_GAS_TRUE@
Chris@1: FLaC__HAS_GAS__TEMPORARILY_DISABLED_FALSE = @FLaC__HAS_GAS__TEMPORARILY_DISABLED_FALSE@
Chris@1: FLaC__HAS_GAS__TEMPORARILY_DISABLED_TRUE = @FLaC__HAS_GAS__TEMPORARILY_DISABLED_TRUE@
Chris@1: FLaC__HAS_NASM_FALSE = @FLaC__HAS_NASM_FALSE@
Chris@1: FLaC__HAS_NASM_TRUE = @FLaC__HAS_NASM_TRUE@
Chris@1: FLaC__HAS_OGG_FALSE = @FLaC__HAS_OGG_FALSE@
Chris@1: FLaC__HAS_OGG_TRUE = @FLaC__HAS_OGG_TRUE@
Chris@1: FLaC__HAS_XMMS_FALSE = @FLaC__HAS_XMMS_FALSE@
Chris@1: FLaC__HAS_XMMS_TRUE = @FLaC__HAS_XMMS_TRUE@
Chris@1: FLaC__INSTALL_XMMS_PLUGIN_LOCALLY_FALSE = @FLaC__INSTALL_XMMS_PLUGIN_LOCALLY_FALSE@
Chris@1: FLaC__INSTALL_XMMS_PLUGIN_LOCALLY_TRUE = @FLaC__INSTALL_XMMS_PLUGIN_LOCALLY_TRUE@
Chris@1: FLaC__NO_ASM_FALSE = @FLaC__NO_ASM_FALSE@
Chris@1: FLaC__NO_ASM_TRUE = @FLaC__NO_ASM_TRUE@
Chris@1: FLaC__SSE_OS_FALSE = @FLaC__SSE_OS_FALSE@
Chris@1: FLaC__SSE_OS_TRUE = @FLaC__SSE_OS_TRUE@
Chris@1: FLaC__SYS_DARWIN_FALSE = @FLaC__SYS_DARWIN_FALSE@
Chris@1: FLaC__SYS_DARWIN_TRUE = @FLaC__SYS_DARWIN_TRUE@
Chris@1: FLaC__SYS_LINUX_FALSE = @FLaC__SYS_LINUX_FALSE@
Chris@1: FLaC__SYS_LINUX_TRUE = @FLaC__SYS_LINUX_TRUE@
Chris@1: FLaC__USE_3DNOW_FALSE = @FLaC__USE_3DNOW_FALSE@
Chris@1: FLaC__USE_3DNOW_TRUE = @FLaC__USE_3DNOW_TRUE@
Chris@1: FLaC__USE_ALTIVEC_FALSE = @FLaC__USE_ALTIVEC_FALSE@
Chris@1: FLaC__USE_ALTIVEC_TRUE = @FLaC__USE_ALTIVEC_TRUE@
Chris@1: FLaC__WITH_CPPLIBS_FALSE = @FLaC__WITH_CPPLIBS_FALSE@
Chris@1: FLaC__WITH_CPPLIBS_TRUE = @FLaC__WITH_CPPLIBS_TRUE@
Chris@1: GAS = @GAS@
Chris@1: INSTALL_DATA = @INSTALL_DATA@
Chris@1: INSTALL_PROGRAM = @INSTALL_PROGRAM@
Chris@1: INSTALL_SCRIPT = @INSTALL_SCRIPT@
Chris@1: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
Chris@1: LDFLAGS = @LDFLAGS@
Chris@1: LIBICONV = @LIBICONV@
Chris@1: LIBOBJS = @LIBOBJS@
Chris@1: LIBS = @LIBS@
Chris@1: LIBTOOL = @LIBTOOL@
Chris@1: LN_S = @LN_S@
Chris@1: LTLIBICONV = @LTLIBICONV@
Chris@1: LTLIBOBJS = @LTLIBOBJS@
Chris@1: MAINT = @MAINT@
Chris@1: MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
Chris@1: MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
Chris@1: MAKEINFO = @MAKEINFO@
Chris@1: MINGW_WINSOCK_LIBS = @MINGW_WINSOCK_LIBS@
Chris@1: NASM = @NASM@
Chris@1: OBJEXT = @OBJEXT@
Chris@1: OBJ_FORMAT = @OBJ_FORMAT@
Chris@1: OGG_CFLAGS = @OGG_CFLAGS@
Chris@1: OGG_LIBS = @OGG_LIBS@
Chris@1: PACKAGE = @PACKAGE@
Chris@1: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
Chris@1: PACKAGE_NAME = @PACKAGE_NAME@
Chris@1: PACKAGE_STRING = @PACKAGE_STRING@
Chris@1: PACKAGE_TARNAME = @PACKAGE_TARNAME@
Chris@1: PACKAGE_VERSION = @PACKAGE_VERSION@
Chris@1: PATH_SEPARATOR = @PATH_SEPARATOR@
Chris@1: RANLIB = @RANLIB@
Chris@1: SET_MAKE = @SET_MAKE@
Chris@1: SHELL = @SHELL@
Chris@1: STRIP = @STRIP@
Chris@1: VERSION = @VERSION@
Chris@1: XMMS_CFLAGS = @XMMS_CFLAGS@
Chris@1: XMMS_CONFIG = @XMMS_CONFIG@
Chris@1: XMMS_DATA_DIR = @XMMS_DATA_DIR@
Chris@1: XMMS_EFFECT_PLUGIN_DIR = @XMMS_EFFECT_PLUGIN_DIR@
Chris@1: XMMS_GENERAL_PLUGIN_DIR = @XMMS_GENERAL_PLUGIN_DIR@
Chris@1: XMMS_INPUT_PLUGIN_DIR = @XMMS_INPUT_PLUGIN_DIR@
Chris@1: XMMS_LIBS = @XMMS_LIBS@
Chris@1: XMMS_OUTPUT_PLUGIN_DIR = @XMMS_OUTPUT_PLUGIN_DIR@
Chris@1: XMMS_PLUGIN_DIR = @XMMS_PLUGIN_DIR@
Chris@1: XMMS_VERSION = @XMMS_VERSION@
Chris@1: XMMS_VISUALIZATION_PLUGIN_DIR = @XMMS_VISUALIZATION_PLUGIN_DIR@
Chris@1: ac_ct_AR = @ac_ct_AR@
Chris@1: ac_ct_CC = @ac_ct_CC@
Chris@1: ac_ct_CXX = @ac_ct_CXX@
Chris@1: ac_ct_F77 = @ac_ct_F77@
Chris@1: ac_ct_RANLIB = @ac_ct_RANLIB@
Chris@1: ac_ct_STRIP = @ac_ct_STRIP@
Chris@1: am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
Chris@1: am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
Chris@1: am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
Chris@1: am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
Chris@1: am__include = @am__include@
Chris@1: am__leading_dot = @am__leading_dot@
Chris@1: am__quote = @am__quote@
Chris@1: bindir = @bindir@
Chris@1: build = @build@
Chris@1: build_alias = @build_alias@
Chris@1: build_cpu = @build_cpu@
Chris@1: build_os = @build_os@
Chris@1: build_vendor = @build_vendor@
Chris@1: datadir = @datadir@
Chris@1: exec_prefix = @exec_prefix@
Chris@1: host = @host@
Chris@1: host_alias = @host_alias@
Chris@1: host_cpu = @host_cpu@
Chris@1: host_os = @host_os@
Chris@1: host_vendor = @host_vendor@
Chris@1: includedir = @includedir@
Chris@1: infodir = @infodir@
Chris@1: install_sh = @install_sh@
Chris@1: libdir = @libdir@
Chris@1: libexecdir = @libexecdir@
Chris@1: localstatedir = @localstatedir@
Chris@1: mandir = @mandir@
Chris@1: oldincludedir = @oldincludedir@
Chris@1: prefix = @prefix@
Chris@1: program_transform_name = @program_transform_name@
Chris@1: sbindir = @sbindir@
Chris@1: sharedstatedir = @sharedstatedir@
Chris@1: sysconfdir = @sysconfdir@
Chris@1: target_alias = @target_alias@
Chris@1: 
Chris@1: AUTOMAKE_OPTIONS = foreign 1.7
Chris@1: 
Chris@1: SUBDIRS = doc include m4 man src examples test build obj
Chris@1: 
Chris@1: DISTCLEANFILES = libtool-disable-static
Chris@1: 
Chris@1: EXTRA_DIST = \
Chris@1: 	COPYING.FDL \
Chris@1: 	COPYING.GPL \
Chris@1: 	COPYING.LGPL \
Chris@1: 	COPYING.Xiph \
Chris@1: 	FLAC.dsw \
Chris@1: 	FLAC.sln \
Chris@1: 	Makefile.lite \
Chris@1: 	all.dsp \
Chris@1: 	all_dynamic.dsp \
Chris@1: 	all_static.dsp \
Chris@1: 	autogen.sh \
Chris@1: 	config.rpath \
Chris@1: 	depcomp \
Chris@1: 	ltmain.sh \
Chris@1: 	strip_non_asm_libtool_args.sh
Chris@1: 
Chris@1: subdir = .
Chris@1: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
Chris@1: mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
Chris@1: CONFIG_HEADER = config.h
Chris@1: CONFIG_CLEAN_FILES =
Chris@1: DIST_SOURCES =
Chris@1: 
Chris@1: RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
Chris@1: 	ps-recursive install-info-recursive uninstall-info-recursive \
Chris@1: 	all-recursive install-data-recursive install-exec-recursive \
Chris@1: 	installdirs-recursive install-recursive uninstall-recursive \
Chris@1: 	check-recursive installcheck-recursive
Chris@1: DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/configure AUTHORS \
Chris@1: 	Makefile.am aclocal.m4 config.guess config.h.in config.rpath \
Chris@1: 	config.sub configure.in depcomp install-sh ltmain.sh missing \
Chris@1: 	mkinstalldirs
Chris@1: DIST_SUBDIRS = $(SUBDIRS)
Chris@1: all: config.h
Chris@1: 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
Chris@1: 
Chris@1: .SUFFIXES:
Chris@1: 
Chris@1: am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
Chris@1:  configure.lineno
Chris@1: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
Chris@1: 	cd $(top_srcdir) && \
Chris@1: 	  $(AUTOMAKE) --foreign  Makefile
Chris@1: Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
Chris@1: 	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
Chris@1: 
Chris@1: $(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
Chris@1: 	$(SHELL) ./config.status --recheck
Chris@1: $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
Chris@1: 	cd $(srcdir) && $(AUTOCONF)
Chris@1: 
Chris@1: $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in 
Chris@1: 	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
Chris@1: 
Chris@1: config.h: stamp-h1
Chris@1: 	@if test ! -f $@; then \
Chris@1: 	  rm -f stamp-h1; \
Chris@1: 	  $(MAKE) stamp-h1; \
Chris@1: 	else :; fi
Chris@1: 
Chris@1: stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
Chris@1: 	@rm -f stamp-h1
Chris@1: 	cd $(top_builddir) && $(SHELL) ./config.status config.h
Chris@1: 
Chris@1: $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(top_srcdir)/configure.in $(ACLOCAL_M4) 
Chris@1: 	cd $(top_srcdir) && $(AUTOHEADER)
Chris@1: 	touch $(srcdir)/config.h.in
Chris@1: 
Chris@1: distclean-hdr:
Chris@1: 	-rm -f config.h stamp-h1
Chris@1: 
Chris@1: mostlyclean-libtool:
Chris@1: 	-rm -f *.lo
Chris@1: 
Chris@1: clean-libtool:
Chris@1: 	-rm -rf .libs _libs
Chris@1: 
Chris@1: distclean-libtool:
Chris@1: 	-rm -f libtool
Chris@1: uninstall-info-am:
Chris@1: 
Chris@1: # This directory's subdirectories are mostly independent; you can cd
Chris@1: # into them and run `make' without going through this Makefile.
Chris@1: # To change the values of `make' variables: instead of editing Makefiles,
Chris@1: # (1) if the variable is set in `config.status', edit `config.status'
Chris@1: #     (which will cause the Makefiles to be regenerated when you run `make');
Chris@1: # (2) otherwise, pass the desired values on the `make' command line.
Chris@1: $(RECURSIVE_TARGETS):
Chris@1: 	@set fnord $$MAKEFLAGS; amf=$$2; \
Chris@1: 	dot_seen=no; \
Chris@1: 	target=`echo $@ | sed s/-recursive//`; \
Chris@1: 	list='$(SUBDIRS)'; for subdir in $$list; do \
Chris@1: 	  echo "Making $$target in $$subdir"; \
Chris@1: 	  if test "$$subdir" = "."; then \
Chris@1: 	    dot_seen=yes; \
Chris@1: 	    local_target="$$target-am"; \
Chris@1: 	  else \
Chris@1: 	    local_target="$$target"; \
Chris@1: 	  fi; \
Chris@1: 	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
Chris@1: 	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
Chris@1: 	done; \
Chris@1: 	if test "$$dot_seen" = "no"; then \
Chris@1: 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
Chris@1: 	fi; test -z "$$fail"
Chris@1: 
Chris@1: mostlyclean-recursive clean-recursive distclean-recursive \
Chris@1: maintainer-clean-recursive:
Chris@1: 	@set fnord $$MAKEFLAGS; amf=$$2; \
Chris@1: 	dot_seen=no; \
Chris@1: 	case "$@" in \
Chris@1: 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
Chris@1: 	  *) list='$(SUBDIRS)' ;; \
Chris@1: 	esac; \
Chris@1: 	rev=''; for subdir in $$list; do \
Chris@1: 	  if test "$$subdir" = "."; then :; else \
Chris@1: 	    rev="$$subdir $$rev"; \
Chris@1: 	  fi; \
Chris@1: 	done; \
Chris@1: 	rev="$$rev ."; \
Chris@1: 	target=`echo $@ | sed s/-recursive//`; \
Chris@1: 	for subdir in $$rev; do \
Chris@1: 	  echo "Making $$target in $$subdir"; \
Chris@1: 	  if test "$$subdir" = "."; then \
Chris@1: 	    local_target="$$target-am"; \
Chris@1: 	  else \
Chris@1: 	    local_target="$$target"; \
Chris@1: 	  fi; \
Chris@1: 	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
Chris@1: 	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
Chris@1: 	done && test -z "$$fail"
Chris@1: tags-recursive:
Chris@1: 	list='$(SUBDIRS)'; for subdir in $$list; do \
Chris@1: 	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
Chris@1: 	done
Chris@1: ctags-recursive:
Chris@1: 	list='$(SUBDIRS)'; for subdir in $$list; do \
Chris@1: 	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
Chris@1: 	done
Chris@1: 
Chris@1: ETAGS = etags
Chris@1: ETAGSFLAGS =
Chris@1: 
Chris@1: CTAGS = ctags
Chris@1: CTAGSFLAGS =
Chris@1: 
Chris@1: tags: TAGS
Chris@1: 
Chris@1: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
Chris@1: 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
Chris@1: 	unique=`for i in $$list; do \
Chris@1: 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
Chris@1: 	  done | \
Chris@1: 	  $(AWK) '    { files[$$0] = 1; } \
Chris@1: 	       END { for (i in files) print i; }'`; \
Chris@1: 	mkid -fID $$unique
Chris@1: 
Chris@1: TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
Chris@1: 		$(TAGS_FILES) $(LISP)
Chris@1: 	tags=; \
Chris@1: 	here=`pwd`; \
Chris@1: 	if (etags --etags-include --version) >/dev/null 2>&1; then \
Chris@1: 	  include_option=--etags-include; \
Chris@1: 	else \
Chris@1: 	  include_option=--include; \
Chris@1: 	fi; \
Chris@1: 	list='$(SUBDIRS)'; for subdir in $$list; do \
Chris@1: 	  if test "$$subdir" = .; then :; else \
Chris@1: 	    test -f $$subdir/TAGS && \
Chris@1: 	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
Chris@1: 	  fi; \
Chris@1: 	done; \
Chris@1: 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
Chris@1: 	unique=`for i in $$list; do \
Chris@1: 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
Chris@1: 	  done | \
Chris@1: 	  $(AWK) '    { files[$$0] = 1; } \
Chris@1: 	       END { for (i in files) print i; }'`; \
Chris@1: 	test -z "$(ETAGS_ARGS)$$tags$$unique" \
Chris@1: 	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
Chris@1: 	     $$tags $$unique
Chris@1: 
Chris@1: ctags: CTAGS
Chris@1: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
Chris@1: 		$(TAGS_FILES) $(LISP)
Chris@1: 	tags=; \
Chris@1: 	here=`pwd`; \
Chris@1: 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
Chris@1: 	unique=`for i in $$list; do \
Chris@1: 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
Chris@1: 	  done | \
Chris@1: 	  $(AWK) '    { files[$$0] = 1; } \
Chris@1: 	       END { for (i in files) print i; }'`; \
Chris@1: 	test -z "$(CTAGS_ARGS)$$tags$$unique" \
Chris@1: 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
Chris@1: 	     $$tags $$unique
Chris@1: 
Chris@1: GTAGS:
Chris@1: 	here=`$(am__cd) $(top_builddir) && pwd` \
Chris@1: 	  && cd $(top_srcdir) \
Chris@1: 	  && gtags -i $(GTAGS_ARGS) $$here
Chris@1: 
Chris@1: distclean-tags:
Chris@1: 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
Chris@1: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
Chris@1: 
Chris@1: top_distdir = .
Chris@1: distdir = $(PACKAGE)-$(VERSION)
Chris@1: 
Chris@1: am__remove_distdir = \
Chris@1:   { test ! -d $(distdir) \
Chris@1:     || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
Chris@1:          && rm -fr $(distdir); }; }
Chris@1: 
Chris@1: GZIP_ENV = --best
Chris@1: distuninstallcheck_listfiles = find . -type f -print
Chris@1: distcleancheck_listfiles = find . -type f -print
Chris@1: 
Chris@1: distdir: $(DISTFILES)
Chris@1: 	$(am__remove_distdir)
Chris@1: 	mkdir $(distdir)
Chris@1: 	$(mkinstalldirs) $(distdir)/src/libFLAC $(distdir)/src/libFLAC++
Chris@1: 	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
Chris@1: 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
Chris@1: 	list='$(DISTFILES)'; for file in $$list; do \
Chris@1: 	  case $$file in \
Chris@1: 	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
Chris@1: 	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
Chris@1: 	  esac; \
Chris@1: 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
Chris@1: 	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
Chris@1: 	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
Chris@1: 	    dir="/$$dir"; \
Chris@1: 	    $(mkinstalldirs) "$(distdir)$$dir"; \
Chris@1: 	  else \
Chris@1: 	    dir=''; \
Chris@1: 	  fi; \
Chris@1: 	  if test -d $$d/$$file; then \
Chris@1: 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
Chris@1: 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
Chris@1: 	    fi; \
Chris@1: 	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
Chris@1: 	  else \
Chris@1: 	    test -f $(distdir)/$$file \
Chris@1: 	    || cp -p $$d/$$file $(distdir)/$$file \
Chris@1: 	    || exit 1; \
Chris@1: 	  fi; \
Chris@1: 	done
Chris@1: 	list='$(SUBDIRS)'; for subdir in $$list; do \
Chris@1: 	  if test "$$subdir" = .; then :; else \
Chris@1: 	    test -d $(distdir)/$$subdir \
Chris@1: 	    || mkdir $(distdir)/$$subdir \
Chris@1: 	    || exit 1; \
Chris@1: 	    (cd $$subdir && \
Chris@1: 	      $(MAKE) $(AM_MAKEFLAGS) \
Chris@1: 	        top_distdir="$(top_distdir)" \
Chris@1: 	        distdir=../$(distdir)/$$subdir \
Chris@1: 	        distdir) \
Chris@1: 	      || exit 1; \
Chris@1: 	  fi; \
Chris@1: 	done
Chris@1: 	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
Chris@1: 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
Chris@1: 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
Chris@1: 	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
Chris@1: 	|| chmod -R a+r $(distdir)
Chris@1: dist-gzip: distdir
Chris@1: 	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
Chris@1: 	$(am__remove_distdir)
Chris@1: 
Chris@1: dist dist-all: distdir
Chris@1: 	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
Chris@1: 	$(am__remove_distdir)
Chris@1: 
Chris@1: # This target untars the dist file and tries a VPATH configuration.  Then
Chris@1: # it guarantees that the distribution is self-contained by making another
Chris@1: # tarfile.
Chris@1: distcheck: dist
Chris@1: 	$(am__remove_distdir)
Chris@1: 	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
Chris@1: 	chmod -R a-w $(distdir); chmod a+w $(distdir)
Chris@1: 	mkdir $(distdir)/_build
Chris@1: 	mkdir $(distdir)/_inst
Chris@1: 	chmod a-w $(distdir)
Chris@1: 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
Chris@1: 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
Chris@1: 	  && cd $(distdir)/_build \
Chris@1: 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
Chris@1: 	    $(DISTCHECK_CONFIGURE_FLAGS) \
Chris@1: 	  && $(MAKE) $(AM_MAKEFLAGS) \
Chris@1: 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
Chris@1: 	  && $(MAKE) $(AM_MAKEFLAGS) check \
Chris@1: 	  && $(MAKE) $(AM_MAKEFLAGS) install \
Chris@1: 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
Chris@1: 	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
Chris@1: 	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
Chris@1: 	        distuninstallcheck \
Chris@1: 	  && chmod -R a-w "$$dc_install_base" \
Chris@1: 	  && ({ \
Chris@1: 	       (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
Chris@1: 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
Chris@1: 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
Chris@1: 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
Chris@1: 	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
Chris@1: 	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
Chris@1: 	  && rm -rf "$$dc_destdir" \
Chris@1: 	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
Chris@1: 	  && rm -f $(distdir).tar.gz \
Chris@1: 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
Chris@1: 	$(am__remove_distdir)
Chris@1: 	@echo "$(distdir).tar.gz is ready for distribution" | \
Chris@1: 	  sed 'h;s/./=/g;p;x;p;x'
Chris@1: distuninstallcheck:
Chris@1: 	@cd $(distuninstallcheck_dir) \
Chris@1: 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
Chris@1: 	   || { echo "ERROR: files left after uninstall:" ; \
Chris@1: 	        if test -n "$(DESTDIR)"; then \
Chris@1: 	          echo "  (check DESTDIR support)"; \
Chris@1: 	        fi ; \
Chris@1: 	        $(distuninstallcheck_listfiles) ; \
Chris@1: 	        exit 1; } >&2
Chris@1: distcleancheck: distclean
Chris@1: 	@if test '$(srcdir)' = . ; then \
Chris@1: 	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
Chris@1: 	  exit 1 ; \
Chris@1: 	fi
Chris@1: 	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
Chris@1: 	  || { echo "ERROR: files left in build directory after distclean:" ; \
Chris@1: 	       $(distcleancheck_listfiles) ; \
Chris@1: 	       exit 1; } >&2
Chris@1: check-am: all-am
Chris@1: check: check-recursive
Chris@1: all-am: Makefile config.h
Chris@1: installdirs: installdirs-recursive
Chris@1: installdirs-am:
Chris@1: 
Chris@1: install: install-recursive
Chris@1: install-exec: install-exec-recursive
Chris@1: install-data: install-data-recursive
Chris@1: uninstall: uninstall-recursive
Chris@1: 
Chris@1: install-am: all-am
Chris@1: 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
Chris@1: 
Chris@1: installcheck: installcheck-recursive
Chris@1: install-strip:
Chris@1: 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
Chris@1: 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
Chris@1: 	  `test -z '$(STRIP)' || \
Chris@1: 	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
Chris@1: mostlyclean-generic:
Chris@1: 
Chris@1: clean-generic:
Chris@1: 
Chris@1: distclean-generic:
Chris@1: 	-rm -f $(CONFIG_CLEAN_FILES)
Chris@1: 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
Chris@1: 
Chris@1: maintainer-clean-generic:
Chris@1: 	@echo "This command is intended for maintainers to use"
Chris@1: 	@echo "it deletes files that may require special tools to rebuild."
Chris@1: clean: clean-recursive
Chris@1: 
Chris@1: clean-am: clean-generic clean-libtool mostlyclean-am
Chris@1: 
Chris@1: distclean: distclean-recursive
Chris@1: 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
Chris@1: 	-rm -f Makefile
Chris@1: distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \
Chris@1: 	distclean-tags
Chris@1: 
Chris@1: dvi: dvi-recursive
Chris@1: 
Chris@1: dvi-am:
Chris@1: 
Chris@1: info: info-recursive
Chris@1: 
Chris@1: info-am:
Chris@1: 
Chris@1: install-data-am:
Chris@1: 
Chris@1: install-exec-am:
Chris@1: 
Chris@1: install-info: install-info-recursive
Chris@1: 
Chris@1: install-man:
Chris@1: 
Chris@1: installcheck-am:
Chris@1: 
Chris@1: maintainer-clean: maintainer-clean-recursive
Chris@1: 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
Chris@1: 	-rm -rf $(top_srcdir)/autom4te.cache
Chris@1: 	-rm -f Makefile
Chris@1: maintainer-clean-am: distclean-am maintainer-clean-generic
Chris@1: 
Chris@1: mostlyclean: mostlyclean-recursive
Chris@1: 
Chris@1: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
Chris@1: 
Chris@1: pdf: pdf-recursive
Chris@1: 
Chris@1: pdf-am:
Chris@1: 
Chris@1: ps: ps-recursive
Chris@1: 
Chris@1: ps-am:
Chris@1: 
Chris@1: uninstall-am: uninstall-info-am
Chris@1: 
Chris@1: uninstall-info: uninstall-info-recursive
Chris@1: 
Chris@1: .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
Chris@1: 	clean-generic clean-libtool clean-recursive ctags \
Chris@1: 	ctags-recursive dist dist-all dist-gzip distcheck distclean \
Chris@1: 	distclean-generic distclean-hdr distclean-libtool \
Chris@1: 	distclean-recursive distclean-tags distcleancheck distdir \
Chris@1: 	distuninstallcheck dvi dvi-am dvi-recursive info info-am \
Chris@1: 	info-recursive install install-am install-data install-data-am \
Chris@1: 	install-data-recursive install-exec install-exec-am \
Chris@1: 	install-exec-recursive install-info install-info-am \
Chris@1: 	install-info-recursive install-man install-recursive \
Chris@1: 	install-strip installcheck installcheck-am installdirs \
Chris@1: 	installdirs-am installdirs-recursive maintainer-clean \
Chris@1: 	maintainer-clean-generic maintainer-clean-recursive mostlyclean \
Chris@1: 	mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
Chris@1: 	pdf pdf-am pdf-recursive ps ps-am ps-recursive tags \
Chris@1: 	tags-recursive uninstall uninstall-am uninstall-info-am \
Chris@1: 	uninstall-info-recursive uninstall-recursive
Chris@1: 
Chris@1: # Tell versions [3.59,3.63) of GNU make to not export all variables.
Chris@1: # Otherwise a system limit (for SysV at least) may be exceeded.
Chris@1: .NOEXPORT: