Mercurial > hg > sv-dependency-builds
comparison src/zlib-1.2.7/contrib/pascal/example.pas @ 4:e13257ea84a4
Add bzip2, zlib, liblo, portaudio sources
author | Chris Cannam |
---|---|
date | Wed, 20 Mar 2013 13:59:52 +0000 |
parents | |
children |
comparison
equal
deleted
inserted
replaced
3:6c505a35919a | 4:e13257ea84a4 |
---|---|
1 (* example.c -- usage example of the zlib compression library | |
2 * Copyright (C) 1995-2003 Jean-loup Gailly. | |
3 * For conditions of distribution and use, see copyright notice in zlib.h | |
4 * | |
5 * Pascal translation | |
6 * Copyright (C) 1998 by Jacques Nomssi Nzali. | |
7 * For conditions of distribution and use, see copyright notice in readme.txt | |
8 * | |
9 * Adaptation to the zlibpas interface | |
10 * Copyright (C) 2003 by Cosmin Truta. | |
11 * For conditions of distribution and use, see copyright notice in readme.txt | |
12 *) | |
13 | |
14 program example; | |
15 | |
16 {$DEFINE TEST_COMPRESS} | |
17 {DO NOT $DEFINE TEST_GZIO} | |
18 {$DEFINE TEST_DEFLATE} | |
19 {$DEFINE TEST_INFLATE} | |
20 {$DEFINE TEST_FLUSH} | |
21 {$DEFINE TEST_SYNC} | |
22 {$DEFINE TEST_DICT} | |
23 | |
24 uses SysUtils, zlibpas; | |
25 | |
26 const TESTFILE = 'foo.gz'; | |
27 | |
28 (* "hello world" would be more standard, but the repeated "hello" | |
29 * stresses the compression code better, sorry... | |
30 *) | |
31 const hello: PChar = 'hello, hello!'; | |
32 | |
33 const dictionary: PChar = 'hello'; | |
34 | |
35 var dictId: LongInt; (* Adler32 value of the dictionary *) | |
36 | |
37 procedure CHECK_ERR(err: Integer; msg: String); | |
38 begin | |
39 if err <> Z_OK then | |
40 begin | |
41 WriteLn(msg, ' error: ', err); | |
42 Halt(1); | |
43 end; | |
44 end; | |
45 | |
46 procedure EXIT_ERR(const msg: String); | |
47 begin | |
48 WriteLn('Error: ', msg); | |
49 Halt(1); | |
50 end; | |
51 | |
52 (* =========================================================================== | |
53 * Test compress and uncompress | |
54 *) | |
55 {$IFDEF TEST_COMPRESS} | |
56 procedure test_compress(compr: Pointer; comprLen: LongInt; | |
57 uncompr: Pointer; uncomprLen: LongInt); | |
58 var err: Integer; | |
59 len: LongInt; | |
60 begin | |
61 len := StrLen(hello)+1; | |
62 | |
63 err := compress(compr, comprLen, hello, len); | |
64 CHECK_ERR(err, 'compress'); | |
65 | |
66 StrCopy(PChar(uncompr), 'garbage'); | |
67 | |
68 err := uncompress(uncompr, uncomprLen, compr, comprLen); | |
69 CHECK_ERR(err, 'uncompress'); | |
70 | |
71 if StrComp(PChar(uncompr), hello) <> 0 then | |
72 EXIT_ERR('bad uncompress') | |
73 else | |
74 WriteLn('uncompress(): ', PChar(uncompr)); | |
75 end; | |
76 {$ENDIF} | |
77 | |
78 (* =========================================================================== | |
79 * Test read/write of .gz files | |
80 *) | |
81 {$IFDEF TEST_GZIO} | |
82 procedure test_gzio(const fname: PChar; (* compressed file name *) | |
83 uncompr: Pointer; | |
84 uncomprLen: LongInt); | |
85 var err: Integer; | |
86 len: Integer; | |
87 zfile: gzFile; | |
88 pos: LongInt; | |
89 begin | |
90 len := StrLen(hello)+1; | |
91 | |
92 zfile := gzopen(fname, 'wb'); | |
93 if zfile = NIL then | |
94 begin | |
95 WriteLn('gzopen error'); | |
96 Halt(1); | |
97 end; | |
98 gzputc(zfile, 'h'); | |
99 if gzputs(zfile, 'ello') <> 4 then | |
100 begin | |
101 WriteLn('gzputs err: ', gzerror(zfile, err)); | |
102 Halt(1); | |
103 end; | |
104 {$IFDEF GZ_FORMAT_STRING} | |
105 if gzprintf(zfile, ', %s!', 'hello') <> 8 then | |
106 begin | |
107 WriteLn('gzprintf err: ', gzerror(zfile, err)); | |
108 Halt(1); | |
109 end; | |
110 {$ELSE} | |
111 if gzputs(zfile, ', hello!') <> 8 then | |
112 begin | |
113 WriteLn('gzputs err: ', gzerror(zfile, err)); | |
114 Halt(1); | |
115 end; | |
116 {$ENDIF} | |
117 gzseek(zfile, 1, SEEK_CUR); (* add one zero byte *) | |
118 gzclose(zfile); | |
119 | |
120 zfile := gzopen(fname, 'rb'); | |
121 if zfile = NIL then | |
122 begin | |
123 WriteLn('gzopen error'); | |
124 Halt(1); | |
125 end; | |
126 | |
127 StrCopy(PChar(uncompr), 'garbage'); | |
128 | |
129 if gzread(zfile, uncompr, uncomprLen) <> len then | |
130 begin | |
131 WriteLn('gzread err: ', gzerror(zfile, err)); | |
132 Halt(1); | |
133 end; | |
134 if StrComp(PChar(uncompr), hello) <> 0 then | |
135 begin | |
136 WriteLn('bad gzread: ', PChar(uncompr)); | |
137 Halt(1); | |
138 end | |
139 else | |
140 WriteLn('gzread(): ', PChar(uncompr)); | |
141 | |
142 pos := gzseek(zfile, -8, SEEK_CUR); | |
143 if (pos <> 6) or (gztell(zfile) <> pos) then | |
144 begin | |
145 WriteLn('gzseek error, pos=', pos, ', gztell=', gztell(zfile)); | |
146 Halt(1); | |
147 end; | |
148 | |
149 if gzgetc(zfile) <> ' ' then | |
150 begin | |
151 WriteLn('gzgetc error'); | |
152 Halt(1); | |
153 end; | |
154 | |
155 if gzungetc(' ', zfile) <> ' ' then | |
156 begin | |
157 WriteLn('gzungetc error'); | |
158 Halt(1); | |
159 end; | |
160 | |
161 gzgets(zfile, PChar(uncompr), uncomprLen); | |
162 uncomprLen := StrLen(PChar(uncompr)); | |
163 if uncomprLen <> 7 then (* " hello!" *) | |
164 begin | |
165 WriteLn('gzgets err after gzseek: ', gzerror(zfile, err)); | |
166 Halt(1); | |
167 end; | |
168 if StrComp(PChar(uncompr), hello + 6) <> 0 then | |
169 begin | |
170 WriteLn('bad gzgets after gzseek'); | |
171 Halt(1); | |
172 end | |
173 else | |
174 WriteLn('gzgets() after gzseek: ', PChar(uncompr)); | |
175 | |
176 gzclose(zfile); | |
177 end; | |
178 {$ENDIF} | |
179 | |
180 (* =========================================================================== | |
181 * Test deflate with small buffers | |
182 *) | |
183 {$IFDEF TEST_DEFLATE} | |
184 procedure test_deflate(compr: Pointer; comprLen: LongInt); | |
185 var c_stream: z_stream; (* compression stream *) | |
186 err: Integer; | |
187 len: LongInt; | |
188 begin | |
189 len := StrLen(hello)+1; | |
190 | |
191 c_stream.zalloc := NIL; | |
192 c_stream.zfree := NIL; | |
193 c_stream.opaque := NIL; | |
194 | |
195 err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION); | |
196 CHECK_ERR(err, 'deflateInit'); | |
197 | |
198 c_stream.next_in := hello; | |
199 c_stream.next_out := compr; | |
200 | |
201 while (c_stream.total_in <> len) and | |
202 (c_stream.total_out < comprLen) do | |
203 begin | |
204 c_stream.avail_out := 1; { force small buffers } | |
205 c_stream.avail_in := 1; | |
206 err := deflate(c_stream, Z_NO_FLUSH); | |
207 CHECK_ERR(err, 'deflate'); | |
208 end; | |
209 | |
210 (* Finish the stream, still forcing small buffers: *) | |
211 while TRUE do | |
212 begin | |
213 c_stream.avail_out := 1; | |
214 err := deflate(c_stream, Z_FINISH); | |
215 if err = Z_STREAM_END then | |
216 break; | |
217 CHECK_ERR(err, 'deflate'); | |
218 end; | |
219 | |
220 err := deflateEnd(c_stream); | |
221 CHECK_ERR(err, 'deflateEnd'); | |
222 end; | |
223 {$ENDIF} | |
224 | |
225 (* =========================================================================== | |
226 * Test inflate with small buffers | |
227 *) | |
228 {$IFDEF TEST_INFLATE} | |
229 procedure test_inflate(compr: Pointer; comprLen : LongInt; | |
230 uncompr: Pointer; uncomprLen : LongInt); | |
231 var err: Integer; | |
232 d_stream: z_stream; (* decompression stream *) | |
233 begin | |
234 StrCopy(PChar(uncompr), 'garbage'); | |
235 | |
236 d_stream.zalloc := NIL; | |
237 d_stream.zfree := NIL; | |
238 d_stream.opaque := NIL; | |
239 | |
240 d_stream.next_in := compr; | |
241 d_stream.avail_in := 0; | |
242 d_stream.next_out := uncompr; | |
243 | |
244 err := inflateInit(d_stream); | |
245 CHECK_ERR(err, 'inflateInit'); | |
246 | |
247 while (d_stream.total_out < uncomprLen) and | |
248 (d_stream.total_in < comprLen) do | |
249 begin | |
250 d_stream.avail_out := 1; (* force small buffers *) | |
251 d_stream.avail_in := 1; | |
252 err := inflate(d_stream, Z_NO_FLUSH); | |
253 if err = Z_STREAM_END then | |
254 break; | |
255 CHECK_ERR(err, 'inflate'); | |
256 end; | |
257 | |
258 err := inflateEnd(d_stream); | |
259 CHECK_ERR(err, 'inflateEnd'); | |
260 | |
261 if StrComp(PChar(uncompr), hello) <> 0 then | |
262 EXIT_ERR('bad inflate') | |
263 else | |
264 WriteLn('inflate(): ', PChar(uncompr)); | |
265 end; | |
266 {$ENDIF} | |
267 | |
268 (* =========================================================================== | |
269 * Test deflate with large buffers and dynamic change of compression level | |
270 *) | |
271 {$IFDEF TEST_DEFLATE} | |
272 procedure test_large_deflate(compr: Pointer; comprLen: LongInt; | |
273 uncompr: Pointer; uncomprLen: LongInt); | |
274 var c_stream: z_stream; (* compression stream *) | |
275 err: Integer; | |
276 begin | |
277 c_stream.zalloc := NIL; | |
278 c_stream.zfree := NIL; | |
279 c_stream.opaque := NIL; | |
280 | |
281 err := deflateInit(c_stream, Z_BEST_SPEED); | |
282 CHECK_ERR(err, 'deflateInit'); | |
283 | |
284 c_stream.next_out := compr; | |
285 c_stream.avail_out := Integer(comprLen); | |
286 | |
287 (* At this point, uncompr is still mostly zeroes, so it should compress | |
288 * very well: | |
289 *) | |
290 c_stream.next_in := uncompr; | |
291 c_stream.avail_in := Integer(uncomprLen); | |
292 err := deflate(c_stream, Z_NO_FLUSH); | |
293 CHECK_ERR(err, 'deflate'); | |
294 if c_stream.avail_in <> 0 then | |
295 EXIT_ERR('deflate not greedy'); | |
296 | |
297 (* Feed in already compressed data and switch to no compression: *) | |
298 deflateParams(c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY); | |
299 c_stream.next_in := compr; | |
300 c_stream.avail_in := Integer(comprLen div 2); | |
301 err := deflate(c_stream, Z_NO_FLUSH); | |
302 CHECK_ERR(err, 'deflate'); | |
303 | |
304 (* Switch back to compressing mode: *) | |
305 deflateParams(c_stream, Z_BEST_COMPRESSION, Z_FILTERED); | |
306 c_stream.next_in := uncompr; | |
307 c_stream.avail_in := Integer(uncomprLen); | |
308 err := deflate(c_stream, Z_NO_FLUSH); | |
309 CHECK_ERR(err, 'deflate'); | |
310 | |
311 err := deflate(c_stream, Z_FINISH); | |
312 if err <> Z_STREAM_END then | |
313 EXIT_ERR('deflate should report Z_STREAM_END'); | |
314 | |
315 err := deflateEnd(c_stream); | |
316 CHECK_ERR(err, 'deflateEnd'); | |
317 end; | |
318 {$ENDIF} | |
319 | |
320 (* =========================================================================== | |
321 * Test inflate with large buffers | |
322 *) | |
323 {$IFDEF TEST_INFLATE} | |
324 procedure test_large_inflate(compr: Pointer; comprLen: LongInt; | |
325 uncompr: Pointer; uncomprLen: LongInt); | |
326 var err: Integer; | |
327 d_stream: z_stream; (* decompression stream *) | |
328 begin | |
329 StrCopy(PChar(uncompr), 'garbage'); | |
330 | |
331 d_stream.zalloc := NIL; | |
332 d_stream.zfree := NIL; | |
333 d_stream.opaque := NIL; | |
334 | |
335 d_stream.next_in := compr; | |
336 d_stream.avail_in := Integer(comprLen); | |
337 | |
338 err := inflateInit(d_stream); | |
339 CHECK_ERR(err, 'inflateInit'); | |
340 | |
341 while TRUE do | |
342 begin | |
343 d_stream.next_out := uncompr; (* discard the output *) | |
344 d_stream.avail_out := Integer(uncomprLen); | |
345 err := inflate(d_stream, Z_NO_FLUSH); | |
346 if err = Z_STREAM_END then | |
347 break; | |
348 CHECK_ERR(err, 'large inflate'); | |
349 end; | |
350 | |
351 err := inflateEnd(d_stream); | |
352 CHECK_ERR(err, 'inflateEnd'); | |
353 | |
354 if d_stream.total_out <> 2 * uncomprLen + comprLen div 2 then | |
355 begin | |
356 WriteLn('bad large inflate: ', d_stream.total_out); | |
357 Halt(1); | |
358 end | |
359 else | |
360 WriteLn('large_inflate(): OK'); | |
361 end; | |
362 {$ENDIF} | |
363 | |
364 (* =========================================================================== | |
365 * Test deflate with full flush | |
366 *) | |
367 {$IFDEF TEST_FLUSH} | |
368 procedure test_flush(compr: Pointer; var comprLen : LongInt); | |
369 var c_stream: z_stream; (* compression stream *) | |
370 err: Integer; | |
371 len: Integer; | |
372 begin | |
373 len := StrLen(hello)+1; | |
374 | |
375 c_stream.zalloc := NIL; | |
376 c_stream.zfree := NIL; | |
377 c_stream.opaque := NIL; | |
378 | |
379 err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION); | |
380 CHECK_ERR(err, 'deflateInit'); | |
381 | |
382 c_stream.next_in := hello; | |
383 c_stream.next_out := compr; | |
384 c_stream.avail_in := 3; | |
385 c_stream.avail_out := Integer(comprLen); | |
386 err := deflate(c_stream, Z_FULL_FLUSH); | |
387 CHECK_ERR(err, 'deflate'); | |
388 | |
389 Inc(PByteArray(compr)^[3]); (* force an error in first compressed block *) | |
390 c_stream.avail_in := len - 3; | |
391 | |
392 err := deflate(c_stream, Z_FINISH); | |
393 if err <> Z_STREAM_END then | |
394 CHECK_ERR(err, 'deflate'); | |
395 | |
396 err := deflateEnd(c_stream); | |
397 CHECK_ERR(err, 'deflateEnd'); | |
398 | |
399 comprLen := c_stream.total_out; | |
400 end; | |
401 {$ENDIF} | |
402 | |
403 (* =========================================================================== | |
404 * Test inflateSync() | |
405 *) | |
406 {$IFDEF TEST_SYNC} | |
407 procedure test_sync(compr: Pointer; comprLen: LongInt; | |
408 uncompr: Pointer; uncomprLen : LongInt); | |
409 var err: Integer; | |
410 d_stream: z_stream; (* decompression stream *) | |
411 begin | |
412 StrCopy(PChar(uncompr), 'garbage'); | |
413 | |
414 d_stream.zalloc := NIL; | |
415 d_stream.zfree := NIL; | |
416 d_stream.opaque := NIL; | |
417 | |
418 d_stream.next_in := compr; | |
419 d_stream.avail_in := 2; (* just read the zlib header *) | |
420 | |
421 err := inflateInit(d_stream); | |
422 CHECK_ERR(err, 'inflateInit'); | |
423 | |
424 d_stream.next_out := uncompr; | |
425 d_stream.avail_out := Integer(uncomprLen); | |
426 | |
427 inflate(d_stream, Z_NO_FLUSH); | |
428 CHECK_ERR(err, 'inflate'); | |
429 | |
430 d_stream.avail_in := Integer(comprLen-2); (* read all compressed data *) | |
431 err := inflateSync(d_stream); (* but skip the damaged part *) | |
432 CHECK_ERR(err, 'inflateSync'); | |
433 | |
434 err := inflate(d_stream, Z_FINISH); | |
435 if err <> Z_DATA_ERROR then | |
436 EXIT_ERR('inflate should report DATA_ERROR'); | |
437 (* Because of incorrect adler32 *) | |
438 | |
439 err := inflateEnd(d_stream); | |
440 CHECK_ERR(err, 'inflateEnd'); | |
441 | |
442 WriteLn('after inflateSync(): hel', PChar(uncompr)); | |
443 end; | |
444 {$ENDIF} | |
445 | |
446 (* =========================================================================== | |
447 * Test deflate with preset dictionary | |
448 *) | |
449 {$IFDEF TEST_DICT} | |
450 procedure test_dict_deflate(compr: Pointer; comprLen: LongInt); | |
451 var c_stream: z_stream; (* compression stream *) | |
452 err: Integer; | |
453 begin | |
454 c_stream.zalloc := NIL; | |
455 c_stream.zfree := NIL; | |
456 c_stream.opaque := NIL; | |
457 | |
458 err := deflateInit(c_stream, Z_BEST_COMPRESSION); | |
459 CHECK_ERR(err, 'deflateInit'); | |
460 | |
461 err := deflateSetDictionary(c_stream, dictionary, StrLen(dictionary)); | |
462 CHECK_ERR(err, 'deflateSetDictionary'); | |
463 | |
464 dictId := c_stream.adler; | |
465 c_stream.next_out := compr; | |
466 c_stream.avail_out := Integer(comprLen); | |
467 | |
468 c_stream.next_in := hello; | |
469 c_stream.avail_in := StrLen(hello)+1; | |
470 | |
471 err := deflate(c_stream, Z_FINISH); | |
472 if err <> Z_STREAM_END then | |
473 EXIT_ERR('deflate should report Z_STREAM_END'); | |
474 | |
475 err := deflateEnd(c_stream); | |
476 CHECK_ERR(err, 'deflateEnd'); | |
477 end; | |
478 {$ENDIF} | |
479 | |
480 (* =========================================================================== | |
481 * Test inflate with a preset dictionary | |
482 *) | |
483 {$IFDEF TEST_DICT} | |
484 procedure test_dict_inflate(compr: Pointer; comprLen: LongInt; | |
485 uncompr: Pointer; uncomprLen: LongInt); | |
486 var err: Integer; | |
487 d_stream: z_stream; (* decompression stream *) | |
488 begin | |
489 StrCopy(PChar(uncompr), 'garbage'); | |
490 | |
491 d_stream.zalloc := NIL; | |
492 d_stream.zfree := NIL; | |
493 d_stream.opaque := NIL; | |
494 | |
495 d_stream.next_in := compr; | |
496 d_stream.avail_in := Integer(comprLen); | |
497 | |
498 err := inflateInit(d_stream); | |
499 CHECK_ERR(err, 'inflateInit'); | |
500 | |
501 d_stream.next_out := uncompr; | |
502 d_stream.avail_out := Integer(uncomprLen); | |
503 | |
504 while TRUE do | |
505 begin | |
506 err := inflate(d_stream, Z_NO_FLUSH); | |
507 if err = Z_STREAM_END then | |
508 break; | |
509 if err = Z_NEED_DICT then | |
510 begin | |
511 if d_stream.adler <> dictId then | |
512 EXIT_ERR('unexpected dictionary'); | |
513 err := inflateSetDictionary(d_stream, dictionary, StrLen(dictionary)); | |
514 end; | |
515 CHECK_ERR(err, 'inflate with dict'); | |
516 end; | |
517 | |
518 err := inflateEnd(d_stream); | |
519 CHECK_ERR(err, 'inflateEnd'); | |
520 | |
521 if StrComp(PChar(uncompr), hello) <> 0 then | |
522 EXIT_ERR('bad inflate with dict') | |
523 else | |
524 WriteLn('inflate with dictionary: ', PChar(uncompr)); | |
525 end; | |
526 {$ENDIF} | |
527 | |
528 var compr, uncompr: Pointer; | |
529 comprLen, uncomprLen: LongInt; | |
530 | |
531 begin | |
532 if zlibVersion^ <> ZLIB_VERSION[1] then | |
533 EXIT_ERR('Incompatible zlib version'); | |
534 | |
535 WriteLn('zlib version: ', zlibVersion); | |
536 WriteLn('zlib compile flags: ', Format('0x%x', [zlibCompileFlags])); | |
537 | |
538 comprLen := 10000 * SizeOf(Integer); (* don't overflow on MSDOS *) | |
539 uncomprLen := comprLen; | |
540 GetMem(compr, comprLen); | |
541 GetMem(uncompr, uncomprLen); | |
542 if (compr = NIL) or (uncompr = NIL) then | |
543 EXIT_ERR('Out of memory'); | |
544 (* compr and uncompr are cleared to avoid reading uninitialized | |
545 * data and to ensure that uncompr compresses well. | |
546 *) | |
547 FillChar(compr^, comprLen, 0); | |
548 FillChar(uncompr^, uncomprLen, 0); | |
549 | |
550 {$IFDEF TEST_COMPRESS} | |
551 WriteLn('** Testing compress'); | |
552 test_compress(compr, comprLen, uncompr, uncomprLen); | |
553 {$ENDIF} | |
554 | |
555 {$IFDEF TEST_GZIO} | |
556 WriteLn('** Testing gzio'); | |
557 if ParamCount >= 1 then | |
558 test_gzio(ParamStr(1), uncompr, uncomprLen) | |
559 else | |
560 test_gzio(TESTFILE, uncompr, uncomprLen); | |
561 {$ENDIF} | |
562 | |
563 {$IFDEF TEST_DEFLATE} | |
564 WriteLn('** Testing deflate with small buffers'); | |
565 test_deflate(compr, comprLen); | |
566 {$ENDIF} | |
567 {$IFDEF TEST_INFLATE} | |
568 WriteLn('** Testing inflate with small buffers'); | |
569 test_inflate(compr, comprLen, uncompr, uncomprLen); | |
570 {$ENDIF} | |
571 | |
572 {$IFDEF TEST_DEFLATE} | |
573 WriteLn('** Testing deflate with large buffers'); | |
574 test_large_deflate(compr, comprLen, uncompr, uncomprLen); | |
575 {$ENDIF} | |
576 {$IFDEF TEST_INFLATE} | |
577 WriteLn('** Testing inflate with large buffers'); | |
578 test_large_inflate(compr, comprLen, uncompr, uncomprLen); | |
579 {$ENDIF} | |
580 | |
581 {$IFDEF TEST_FLUSH} | |
582 WriteLn('** Testing deflate with full flush'); | |
583 test_flush(compr, comprLen); | |
584 {$ENDIF} | |
585 {$IFDEF TEST_SYNC} | |
586 WriteLn('** Testing inflateSync'); | |
587 test_sync(compr, comprLen, uncompr, uncomprLen); | |
588 {$ENDIF} | |
589 comprLen := uncomprLen; | |
590 | |
591 {$IFDEF TEST_DICT} | |
592 WriteLn('** Testing deflate and inflate with preset dictionary'); | |
593 test_dict_deflate(compr, comprLen); | |
594 test_dict_inflate(compr, comprLen, uncompr, uncomprLen); | |
595 {$ENDIF} | |
596 | |
597 FreeMem(compr, comprLen); | |
598 FreeMem(uncompr, uncomprLen); | |
599 end. |