comparison src/opus-1.3/celt/_kiss_fft_guts.h @ 154:4664ac0c1032

Add Opus sources and macOS builds

+/*Copyright (c) 2003-2004, Mark Borgerding
+
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice,
+       this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright notice,
+       this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.*/
+
+#ifndef KISS_FFT_GUTS_H
+#define KISS_FFT_GUTS_H
+
+#define MIN(a,b) ((a)<(b) ? (a):(b))
+#define MAX(a,b) ((a)>(b) ? (a):(b))
+
+/* kiss_fft.h
+   defines kiss_fft_scalar as either short or a float type
+   and defines
+   typedef struct { kiss_fft_scalar r; kiss_fft_scalar i; }kiss_fft_cpx; */
+#include "kiss_fft.h"
+
+/*
+  Explanation of macros dealing with complex math:
+
+   C_MUL(m,a,b)         : m = a*b
+   C_FIXDIV( c , div )  : if a fixed point impl., c /= div. noop otherwise
+   C_SUB( res, a,b)     : res = a - b
+   C_SUBFROM( res , a)  : res -= a
+   C_ADDTO( res , a)    : res += a
+ * */
+#ifdef FIXED_POINT
+#include "arch.h"
+
+
+#define SAMP_MAX 2147483647
+#define TWID_MAX 32767
+#define TRIG_UPSCALE 1
+
+#define SAMP_MIN -SAMP_MAX
+
+
+#   define S_MUL(a,b) MULT16_32_Q15(b, a)
+
+#   define C_MUL(m,a,b) \
+      do{ (m).r = SUB32_ovflw(S_MUL((a).r,(b).r) , S_MUL((a).i,(b).i)); \
+          (m).i = ADD32_ovflw(S_MUL((a).r,(b).i) , S_MUL((a).i,(b).r)); }while(0)
+
+#   define C_MULC(m,a,b) \
+      do{ (m).r = ADD32_ovflw(S_MUL((a).r,(b).r) , S_MUL((a).i,(b).i)); \
+          (m).i = SUB32_ovflw(S_MUL((a).i,(b).r) , S_MUL((a).r,(b).i)); }while(0)
+
+#   define C_MULBYSCALAR( c, s ) \
+      do{ (c).r =  S_MUL( (c).r , s ) ;\
+          (c).i =  S_MUL( (c).i , s ) ; }while(0)
+
+#   define DIVSCALAR(x,k) \
+        (x) = S_MUL(  x, (TWID_MAX-((k)>>1))/(k)+1 )
+
+#   define C_FIXDIV(c,div) \
+        do {    DIVSCALAR( (c).r , div);  \
+                DIVSCALAR( (c).i  , div); }while (0)
+
+#define  C_ADD( res, a,b)\
+    do {(res).r=ADD32_ovflw((a).r,(b).r);  (res).i=ADD32_ovflw((a).i,(b).i); \
+    }while(0)
+#define  C_SUB( res, a,b)\
+    do {(res).r=SUB32_ovflw((a).r,(b).r);  (res).i=SUB32_ovflw((a).i,(b).i); \
+    }while(0)
+#define C_ADDTO( res , a)\
+    do {(res).r = ADD32_ovflw((res).r, (a).r);  (res).i = ADD32_ovflw((res).i,(a).i);\
+    }while(0)
+
+#define C_SUBFROM( res , a)\
+    do {(res).r = ADD32_ovflw((res).r,(a).r);  (res).i = SUB32_ovflw((res).i,(a).i); \
+    }while(0)
+
+#if defined(OPUS_ARM_INLINE_ASM)
+#include "arm/kiss_fft_armv4.h"
+#endif
+
+#if defined(OPUS_ARM_INLINE_EDSP)
+#include "arm/kiss_fft_armv5e.h"
+#endif
+#if defined(MIPSr1_ASM)
+#include "mips/kiss_fft_mipsr1.h"
+#endif
+
+#else  /* not FIXED_POINT*/
+
+#   define S_MUL(a,b) ( (a)*(b) )
+#define C_MUL(m,a,b) \
+    do{ (m).r = (a).r*(b).r - (a).i*(b).i;\
+        (m).i = (a).r*(b).i + (a).i*(b).r; }while(0)
+#define C_MULC(m,a,b) \
+    do{ (m).r = (a).r*(b).r + (a).i*(b).i;\
+        (m).i = (a).i*(b).r - (a).r*(b).i; }while(0)
+
+#define C_MUL4(m,a,b) C_MUL(m,a,b)
+
+#   define C_FIXDIV(c,div) /* NOOP */
+#   define C_MULBYSCALAR( c, s ) \
+    do{ (c).r *= (s);\
+        (c).i *= (s); }while(0)
+#endif
+
+#ifndef CHECK_OVERFLOW_OP
+#  define CHECK_OVERFLOW_OP(a,op,b) /* noop */
+#endif
+
+#ifndef C_ADD
+#define  C_ADD( res, a,b)\
+    do { \
+            CHECK_OVERFLOW_OP((a).r,+,(b).r)\
+            CHECK_OVERFLOW_OP((a).i,+,(b).i)\
+            (res).r=(a).r+(b).r;  (res).i=(a).i+(b).i; \
+    }while(0)
+#define  C_SUB( res, a,b)\
+    do { \
+            CHECK_OVERFLOW_OP((a).r,-,(b).r)\
+            CHECK_OVERFLOW_OP((a).i,-,(b).i)\
+            (res).r=(a).r-(b).r;  (res).i=(a).i-(b).i; \
+    }while(0)
+#define C_ADDTO( res , a)\
+    do { \
+            CHECK_OVERFLOW_OP((res).r,+,(a).r)\
+            CHECK_OVERFLOW_OP((res).i,+,(a).i)\
+            (res).r += (a).r;  (res).i += (a).i;\
+    }while(0)
+
+#define C_SUBFROM( res , a)\
+    do {\
+            CHECK_OVERFLOW_OP((res).r,-,(a).r)\
+            CHECK_OVERFLOW_OP((res).i,-,(a).i)\
+            (res).r -= (a).r;  (res).i -= (a).i; \
+    }while(0)
+#endif /* C_ADD defined */
+
+#ifdef FIXED_POINT
+/*#  define KISS_FFT_COS(phase)  TRIG_UPSCALE*floor(MIN(32767,MAX(-32767,.5+32768 * cos (phase))))
+#  define KISS_FFT_SIN(phase)  TRIG_UPSCALE*floor(MIN(32767,MAX(-32767,.5+32768 * sin (phase))))*/
+#  define KISS_FFT_COS(phase)  floor(.5+TWID_MAX*cos (phase))
+#  define KISS_FFT_SIN(phase)  floor(.5+TWID_MAX*sin (phase))
+#  define HALF_OF(x) ((x)>>1)
+#elif defined(USE_SIMD)
+#  define KISS_FFT_COS(phase) _mm_set1_ps( cos(phase) )
+#  define KISS_FFT_SIN(phase) _mm_set1_ps( sin(phase) )
+#  define HALF_OF(x) ((x)*_mm_set1_ps(.5f))
+#else
+#  define KISS_FFT_COS(phase) (kiss_fft_scalar) cos(phase)
+#  define KISS_FFT_SIN(phase) (kiss_fft_scalar) sin(phase)
+#  define HALF_OF(x) ((x)*.5f)
+#endif
+
+#define  kf_cexp(x,phase) \
+        do{ \
+                (x)->r = KISS_FFT_COS(phase);\
+                (x)->i = KISS_FFT_SIN(phase);\
+        }while(0)
+
+#define  kf_cexp2(x,phase) \
+   do{ \
+      (x)->r = TRIG_UPSCALE*celt_cos_norm((phase));\
+      (x)->i = TRIG_UPSCALE*celt_cos_norm((phase)-32768);\
+}while(0)
+
+#endif /* KISS_FFT_GUTS_H */