Chris@1295: OpenIdAuthentication
Chris@1295: ====================
Chris@1295: 
Chris@1295: Provides a thin wrapper around the excellent ruby-openid gem from JanRan. Be sure to install that first:
Chris@1295: 
Chris@1295:   gem install ruby-openid
Chris@1295: 
Chris@1295: To understand what OpenID is about and how it works, it helps to read the documentation for lib/openid/consumer.rb
Chris@1295: from that gem.
Chris@1295: 
Chris@1295: The specification used is http://openid.net/specs/openid-authentication-2_0.html.
Chris@1295: 
Chris@1295: 
Chris@1295: Prerequisites
Chris@1295: =============
Chris@1295: 
Chris@1295: OpenID authentication uses the session, so be sure that you haven't turned that off.
Chris@1295: 
Chris@1295: Alternatively, you can use the file-based store, which just relies on on tmp/openids being present in RAILS_ROOT. But be aware that this store only works if you have a single application server. And it's not safe to use across NFS. It's recommended that you use the database store if at all possible. To use the file-based store, you'll also have to add this line to your config/environment.rb:
Chris@1295: 
Chris@1295:   OpenIdAuthentication.store = :file
Chris@1295: 
Chris@1295: This particular plugin also relies on the fact that the authentication action allows for both POST and GET operations.
Chris@1295: If you're using RESTful authentication, you'll need to explicitly allow for this in your routes.rb.
Chris@1295: 
Chris@1295: The plugin also expects to find a root_url method that points to the home page of your site. You can accomplish this by using a root route in config/routes.rb:
Chris@1295: 
Chris@1295:   map.root :controller => 'articles'
Chris@1295: 
Chris@1295: This plugin relies on Rails Edge revision 6317 or newer.
Chris@1295: 
Chris@1295: 
Chris@1295: Example
Chris@1295: =======
Chris@1295: 
Chris@1295: This example is just to meant to demonstrate how you could use OpenID authentication. You might well want to add
Chris@1295: salted hash logins instead of plain text passwords and other requirements on top of this. Treat it as a starting point,
Chris@1295: not a destination.
Chris@1295: 
Chris@1295: Note that the User model referenced in the simple example below has an 'identity_url' attribute. You will want to add the same or similar field to whatever
Chris@1295: model you are using for authentication.
Chris@1295: 
Chris@1295: Also of note is the following code block used in the example below:
Chris@1295: 
Chris@1295:   authenticate_with_open_id do |result, identity_url|
Chris@1295:     ...
Chris@1295:   end
Chris@1295: 
Chris@1295: In the above code block, 'identity_url' will need to match user.identity_url exactly. 'identity_url' will be a string in the form of 'http://example.com' -
Chris@1295: If you are storing just 'example.com' with your user, the lookup will fail.
Chris@1295: 
Chris@1295: There is a handy method in this plugin called 'normalize_url' that will help with validating OpenID URLs.
Chris@1295: 
Chris@1295:   OpenIdAuthentication.normalize_url(user.identity_url)
Chris@1295: 
Chris@1295: The above will return a standardized version of the OpenID URL - the above called with 'example.com' will return 'http://example.com/'
Chris@1295: It will also raise an InvalidOpenId exception if the URL is determined to not be valid.
Chris@1295: Use the above code in your User model and validate OpenID URLs before saving them.
Chris@1295: 
Chris@1295: config/routes.rb
Chris@1295: 
Chris@1295:   map.root :controller => 'articles'
Chris@1295:   map.resource :session
Chris@1295: 
Chris@1295: 
Chris@1295: app/views/sessions/new.erb
Chris@1295: 
Chris@1295:   <% form_tag(session_url) do %>
Chris@1295:     <p>
Chris@1295:       <label for="name">Username:</label>
Chris@1295:       <%= text_field_tag "name" %>
Chris@1295:     </p>
Chris@1295: 
Chris@1295:     <p>
Chris@1295:       <label for="password">Password:</label>
Chris@1295:       <%= password_field_tag %>
Chris@1295:     </p>
Chris@1295: 
Chris@1295:     <p>
Chris@1295:       ...or use:
Chris@1295:     </p>
Chris@1295: 
Chris@1295:     <p>
Chris@1295:       <label for="openid_identifier">OpenID:</label>
Chris@1295:       <%= text_field_tag "openid_identifier" %>
Chris@1295:     </p>
Chris@1295: 
Chris@1295:     <p>
Chris@1295:       <%= submit_tag 'Sign in', :disable_with => "Signing in&hellip;" %>
Chris@1295:     </p>
Chris@1295:   <% end %>
Chris@1295: 
Chris@1295: app/controllers/sessions_controller.rb
Chris@1295:   class SessionsController < ApplicationController
Chris@1295:     def create
Chris@1295:       if using_open_id?
Chris@1295:         open_id_authentication
Chris@1295:       else
Chris@1295:         password_authentication(params[:name], params[:password])
Chris@1295:       end
Chris@1295:     end
Chris@1295: 
Chris@1295: 
Chris@1295:     protected
Chris@1295:       def password_authentication(name, password)
Chris@1295:         if @current_user = @account.users.authenticate(params[:name], params[:password])
Chris@1295:           successful_login
Chris@1295:         else
Chris@1295:           failed_login "Sorry, that username/password doesn't work"
Chris@1295:         end
Chris@1295:       end
Chris@1295: 
Chris@1295:       def open_id_authentication
Chris@1295:         authenticate_with_open_id do |result, identity_url|
Chris@1295:           if result.successful?
Chris@1295:             if @current_user = @account.users.find_by_identity_url(identity_url)
Chris@1295:               successful_login
Chris@1295:             else
Chris@1295:               failed_login "Sorry, no user by that identity URL exists (#{identity_url})"
Chris@1295:             end
Chris@1295:           else
Chris@1295:             failed_login result.message
Chris@1295:           end
Chris@1295:         end
Chris@1295:       end
Chris@1295: 
Chris@1295: 
Chris@1295:     private
Chris@1295:       def successful_login
Chris@1295:         session[:user_id] = @current_user.id
Chris@1295:         redirect_to(root_url)
Chris@1295:       end
Chris@1295: 
Chris@1295:       def failed_login(message)
Chris@1295:         flash[:error] = message
Chris@1295:         redirect_to(new_session_url)
Chris@1295:       end
Chris@1295:   end
Chris@1295: 
Chris@1295: 
Chris@1295: 
Chris@1295: If you're fine with the result messages above and don't need individual logic on a per-failure basis,
Chris@1295: you can collapse the case into a mere boolean:
Chris@1295: 
Chris@1295:     def open_id_authentication
Chris@1295:       authenticate_with_open_id do |result, identity_url|
Chris@1295:         if result.successful? && @current_user = @account.users.find_by_identity_url(identity_url)
Chris@1295:           successful_login
Chris@1295:         else
Chris@1295:           failed_login(result.message || "Sorry, no user by that identity URL exists (#{identity_url})")
Chris@1295:         end
Chris@1295:       end
Chris@1295:     end
Chris@1295: 
Chris@1295: 
Chris@1295: Simple Registration OpenID Extension
Chris@1295: ====================================
Chris@1295: 
Chris@1295: Some OpenID Providers support this lightweight profile exchange protocol.  See more: http://www.openidenabled.com/openid/simple-registration-extension
Chris@1295: 
Chris@1295: You can support it in your app by changing #open_id_authentication
Chris@1295: 
Chris@1295:       def open_id_authentication(identity_url)
Chris@1295:         # Pass optional :required and :optional keys to specify what sreg fields you want.
Chris@1295:         # Be sure to yield registration, a third argument in the #authenticate_with_open_id block.
Chris@1295:         authenticate_with_open_id(identity_url,
Chris@1295:             :required => [ :nickname, :email ],
Chris@1295:             :optional => :fullname) do |result, identity_url, registration|
Chris@1295:           case result.status
Chris@1295:           when :missing
Chris@1295:             failed_login "Sorry, the OpenID server couldn't be found"
Chris@1295:           when :invalid
Chris@1295:             failed_login "Sorry, but this does not appear to be a valid OpenID"
Chris@1295:           when :canceled
Chris@1295:             failed_login "OpenID verification was canceled"
Chris@1295:           when :failed
Chris@1295:             failed_login "Sorry, the OpenID verification failed"
Chris@1295:           when :successful
Chris@1295:             if @current_user = @account.users.find_by_identity_url(identity_url)
Chris@1295:               assign_registration_attributes!(registration)
Chris@1295: 
Chris@1295:               if current_user.save
Chris@1295:                 successful_login
Chris@1295:               else
Chris@1295:                 failed_login "Your OpenID profile registration failed: " +
Chris@1295:                   @current_user.errors.full_messages.to_sentence
Chris@1295:               end
Chris@1295:             else
Chris@1295:               failed_login "Sorry, no user by that identity URL exists"
Chris@1295:             end
Chris@1295:           end
Chris@1295:         end
Chris@1295:       end
Chris@1295: 
Chris@1295:       # registration is a hash containing the valid sreg keys given above
Chris@1295:       # use this to map them to fields of your user model
Chris@1295:       def assign_registration_attributes!(registration)
Chris@1295:         model_to_registration_mapping.each do |model_attribute, registration_attribute|
Chris@1295:           unless registration[registration_attribute].blank?
Chris@1295:             @current_user.send("#{model_attribute}=", registration[registration_attribute])
Chris@1295:           end
Chris@1295:         end
Chris@1295:       end
Chris@1295: 
Chris@1295:       def model_to_registration_mapping
Chris@1295:         { :login => 'nickname', :email => 'email', :display_name => 'fullname' }
Chris@1295:       end
Chris@1295: 
Chris@1295: Attribute Exchange OpenID Extension
Chris@1295: ===================================
Chris@1295: 
Chris@1295: Some OpenID providers also support the OpenID AX (attribute exchange) protocol for exchanging identity information between endpoints.  See more: http://openid.net/specs/openid-attribute-exchange-1_0.html
Chris@1295: 
Chris@1295: Accessing AX data is very similar to the Simple Registration process, described above -- just add the URI identifier for the AX field to your :optional or :required parameters.  For example:
Chris@1295: 
Chris@1295:         authenticate_with_open_id(identity_url,
Chris@1295:             :required => [ :email, 'http://schema.openid.net/birthDate' ]) do |result, identity_url, registration|
Chris@1295: 
Chris@1295: This would provide the sreg data for :email, and the AX data for 'http://schema.openid.net/birthDate'
Chris@1295: 
Chris@1295: 
Chris@1295: 
Chris@1295: Copyright (c) 2007 David Heinemeier Hansson, released under the MIT license