log

age author description
Fri, 06 Jan 2017 11:21:09 +0000 Chris Cannam Untabify, comment test that doesn't apply on Windows 3.0-integration
Fri, 06 Jan 2017 09:50:13 +0000 Chris Cannam Untabify some more 3.0-integration
Fri, 06 Jan 2017 09:43:41 +0000 Chris Cannam Improved debug output for file open troubleshooting 3.0-integration
Fri, 06 Jan 2017 09:15:36 +0000 Chris Cannam Untabify 3.0-integration
Thu, 05 Jan 2017 20:31:54 +0000 Chris Cannam Couple of minor Windows updates 3.0-integration
Thu, 05 Jan 2017 14:38:11 +0000 Chris Cannam No hit counts in release 3.0-integration
Thu, 05 Jan 2017 14:30:49 +0000 Chris Cannam More cache hit counts; make debug output from colour 3d plot renderer (even though it is to SVDEBUG) appear only with explicit debug flag 3.0-integration
Thu, 05 Jan 2017 14:17:47 +0000 Chris Cannam Don't start in the middle when repainting the whole width while using a peak cache. It looks funny. 3.0-integration
Thu, 05 Jan 2017 14:02:54 +0000 Chris Cannam Make the colour 3d plot renderer able to support more than one level of peak cache; introduce a second "peak" cache for the spectrogram layer that actually has a 1-1 column relationship with the underlying FFT model, and use it in addition to the existing peak cache if memory is plentiful. Makes spectrograms appear much faster in many common situations. 3.0-integration
Thu, 05 Jan 2017 11:10:57 +0000 Chris Cannam Recreate FFT model when something changes, not the next time it's requested (avoids extra work when only retrieving the model) 3.0-integration
Wed, 04 Jan 2017 19:11:10 +0000 Chris Cannam Merge in subrepo 3.0-integration
Wed, 04 Jan 2017 16:53:06 +0000 Chris Cannam Pull out record buffer into a separate RT-ish thread 3.0-integration
Wed, 04 Jan 2017 16:03:12 +0000 Chris Cannam Wire up record monitoring 3.0-integration
Wed, 04 Jan 2017 14:22:39 +0000 Chris Cannam Make writable model updating explicit rather than essentially an arbitrary hidden accident 3.0-integration
Wed, 04 Jan 2017 13:23:18 +0000 Chris Cannam Add record update timer (very crude this) 3.0-integration
Wed, 04 Jan 2017 12:05:14 +0000 Chris Cannam Close wave file writer when recording stops (instead of leaving record file unclosed until the model is deleted) 3.0-integration
Wed, 04 Jan 2017 11:48:03 +0000 Chris Cannam Fix race condition in first-time recording, where adding the recording wave model would prompt the audio play source to note that its channel count had increased (from 0 to, say, 2) and thus to cause the audio device to be reopened, stopping recording. Fix is to make this only happen if channel count increases beyond that of the device, which shouldn't happen in the recording case 3.0-integration
Wed, 04 Jan 2017 09:57:13 +0000 Chris Cannam Report audio driver startup error 3.0-integration
Tue, 03 Jan 2017 16:50:50 +0000 Chris Cannam Mention hybrid normalisation in changelog 3.0-integration
Tue, 03 Jan 2017 16:45:43 +0000 Chris Cannam Avoid accidentally resetting locale to the empty string when reading pref 3.0-integration
Tue, 03 Jan 2017 16:39:42 +0000 Chris Cannam Run update-i18n script 3.0-integration
Tue, 03 Jan 2017 16:23:11 +0000 Chris Cannam Provisionally add labels for normalisation menu (sigh) 3.0-integration
Tue, 03 Jan 2017 16:14:59 +0000 Chris Cannam Add help icon, + update subrepo 3.0-integration
Tue, 03 Jan 2017 16:14:31 +0000 Chris Cannam Some copyright dates and build adjustments 3.0-integration
Tue, 03 Jan 2017 16:13:48 +0000 Chris Cannam Next actual release will be 3.0-beta1 3.0-integration
Tue, 03 Jan 2017 15:15:26 +0000 Chris Cannam Store/recall colours by hex name; simpler and more general (was having trouble with reloading on Mac). Also update subrepos inc PortAudio build 3.0-integration
Tue, 03 Jan 2017 14:34:46 +0000 Chris Cannam Merge 3.0-integration
Tue, 03 Jan 2017 14:32:53 +0000 Chris Cannam Fix to removal of icons from menus on the Mac 3.0-integration
Tue, 03 Jan 2017 14:36:31 +0000 Chris Cannam Fix accidental breakage of PNG export while adding SVG export 3.0-integration
Tue, 03 Jan 2017 13:30:47 +0000 Chris Cannam Try to handle audio device selection more sensibly in cases where only one audio implementation is compiled in 3.0-integration
Tue, 03 Jan 2017 13:05:02 +0000 Chris Cannam Don't show icons on menus in OSX 3.0-integration
Tue, 03 Jan 2017 13:04:35 +0000 Chris Cannam Minor tweak 3.0-integration
Tue, 03 Jan 2017 11:55:29 +0000 Chris Cannam Fix some compiler warnings 3.0-integration
Tue, 03 Jan 2017 11:40:27 +0000 Chris Cannam Update some subrepos 3.0-integration
Tue, 20 Dec 2016 11:53:14 +0000 Chris Cannam Fix erroneous use of single-colour setting to determine dark/light background when in segmentation mode 3.0-integration
Tue, 20 Dec 2016 10:49:24 +0000 Chris Cannam Further PropertyBox layout overhaul: avoid crash (/ assertion failure) when property type changes from e.g. colour to colourmap, by replacing the existing widget within the layout rather than trying to repopulate it 3.0-integration
Mon, 19 Dec 2016 16:34:38 +0000 Chris Cannam Merge from branch svg, and thus (in some subrepos) from levelpanwidget 3.0-integration
Mon, 19 Dec 2016 16:32:34 +0000 Chris Cannam Implement "Export SVG file..." svg
Sat, 17 Dec 2016 11:06:48 +0000 Chris Cannam A useful simplification in rate handling: don't reset to 0 when last model goes 3.0-integration
Fri, 16 Dec 2016 19:35:57 +0000 Chris Cannam Fix incorrect initial display levels in LevelPanWidget 3.0-integration
Fri, 16 Dec 2016 19:26:21 +0000 Chris Cannam Add overview colour preference 3.0-integration
Fri, 16 Dec 2016 19:25:17 +0000 Chris Cannam Start updating changelog for 3.0 3.0-integration
Fri, 16 Dec 2016 16:29:53 +0000 Chris Cannam Support mouse wheel on level-pan tool button 3.0-integration
Fri, 16 Dec 2016 15:55:59 +0000 Chris Cannam Add swatches to colour map combo (optionally, as it turns out they are quite visually distracting) 3.0-integration
Fri, 16 Dec 2016 14:16:06 +0000 Chris Cannam Introduce a colour map combo too. Doesn't yet have swatches 3.0-integration
Fri, 16 Dec 2016 13:10:21 +0000 Chris Cannam Take advantage of the fact that a group layout is now always used, to simplify code 3.0-integration
Fri, 16 Dec 2016 13:08:33 +0000 Chris Cannam Introduce colour combobox class, to replace ad-hoc code in property box 3.0-integration
Fri, 16 Dec 2016 11:11:41 +0000 Chris Cannam Windows build fixes 3.0-integration
Thu, 15 Dec 2016 16:29:27 +0000 Chris Cannam Adjust spacing in property box 3.0-integration
Thu, 15 Dec 2016 16:13:16 +0000 Chris Cannam Merge from branch levelpanwidget 3.0-integration
Thu, 15 Dec 2016 15:34:33 +0000 Chris Cannam Some adjustments to make view elements clearer and more correctly sized, especially on hidpi (non-pixel-doubling) systems levelpanwidget
Thu, 15 Dec 2016 15:12:44 +0000 Chris Cannam Retina thumbwheels levelpanwidget
Thu, 15 Dec 2016 14:53:05 +0000 Chris Cannam Rejig preferences dialog to make it a bit less cumbersome levelpanwidget
Thu, 15 Dec 2016 14:40:30 +0000 Chris Cannam Property box layout fixes etc levelpanwidget
Thu, 15 Dec 2016 14:40:20 +0000 Chris Cannam When the window is actually being closed, we need to close the prefs quickly (otherwise we get a crash on Mac) levelpanwidget
Thu, 15 Dec 2016 11:54:12 +0000 Chris Cannam Make play params area of property box look a bit better on OSX levelpanwidget
Thu, 15 Dec 2016 11:02:25 +0000 Chris Cannam Small OSX fixes levelpanwidget
Thu, 15 Dec 2016 10:36:41 +0000 Chris Cannam Moving around some UI bits levelpanwidget
Thu, 15 Dec 2016 08:58:43 +0000 Chris Cannam Update to current bqresample API 3.0-integration
Wed, 14 Dec 2016 14:28:41 +0000 Chris Cannam Merge from branch 3.0-integration levelpanwidget
Wed, 14 Dec 2016 11:56:58 +0000 Chris Cannam Play-selection fix, and some other subrepo updates 3.0-integration
Tue, 13 Dec 2016 16:23:48 +0000 Chris Cannam Fix some compiler problems 3.0-integration
Tue, 13 Dec 2016 16:06:28 +0000 Chris Cannam QuickTime file reader is no longer used on any platform and is probably rotting. Remove it 3.0-integration
Tue, 13 Dec 2016 15:56:50 +0000 Chris Cannam Explanatory text 3.0-integration
Tue, 13 Dec 2016 15:47:11 +0000 Chris Cannam Subrepo updates 3.0-integration
Tue, 13 Dec 2016 15:23:21 +0000 Chris Cannam Update to use bqvec allocator for float vectors 3.0-integration
Tue, 13 Dec 2016 13:23:51 +0000 Chris Cannam Minor comment tweaks 3.0-integration
Tue, 13 Dec 2016 12:03:48 +0000 Chris Cannam Handle increases in the overall channel count by closing and reopening the audio device. 3.0-integration
Mon, 12 Dec 2016 17:15:24 +0000 Chris Cannam Remove unused signal 3.0-integration
Mon, 12 Dec 2016 17:08:10 +0000 Chris Cannam Jump to start when recording, so you can see something is happening 3.0-integration
Mon, 12 Dec 2016 17:07:53 +0000 Chris Cannam Open record container folder instead of record folder (so you can see all existing recordings, no matter when they were made) 3.0-integration
Mon, 12 Dec 2016 17:07:09 +0000 Chris Cannam Minor tidy 3.0-integration
Mon, 12 Dec 2016 17:01:51 +0000 Chris Cannam Fix race condition (in creating buffers vs starting process thread) and failure to reopen device in PortAudio driver 3.0-integration
Mon, 12 Dec 2016 17:01:16 +0000 Chris Cannam Avoid overflowing vector if number of devices becomes smaller 3.0-integration
Mon, 12 Dec 2016 15:46:53 +0000 Chris Cannam Merge 3.0-integration
Mon, 12 Dec 2016 15:45:33 +0000 Chris Cannam Reopen the audio device directly when preference is changed 3.0-integration
Mon, 12 Dec 2016 15:18:52 +0000 Chris Cannam Some hackery toward having a zoomlevel type zoom
Mon, 12 Dec 2016 10:12:10 +0000 Chris Cannam Build fix in bqvec 3.0-integration
Mon, 12 Dec 2016 09:13:44 +0000 Chris Cannam Subrepo update 3.0-integration
Fri, 09 Dec 2016 19:27:16 +0000 Chris Cannam A bit more slack; make debug be off by default 3.0-integration
Fri, 09 Dec 2016 19:04:33 +0000 Chris Cannam Fix compiler warnings 3.0-integration
Fri, 09 Dec 2016 18:01:55 +0000 Chris Cannam Merge from branch bqresample 3.0-integration
Fri, 09 Dec 2016 17:56:10 +0000 Chris Cannam Debug addition bqresample
Fri, 09 Dec 2016 14:40:49 +0000 Chris Cannam Fixes to sample rate and latency handling bqresample
Fri, 09 Dec 2016 13:46:34 +0000 Chris Cannam Some fixes to sample rate management bqresample
Fri, 09 Dec 2016 10:24:40 +0000 Chris Cannam Update to reflect bqresample API change bqresample
Wed, 07 Dec 2016 14:48:15 +0000 Chris Cannam Fixes to (and debug output in!) ResamplerWrapper bqresample
Wed, 07 Dec 2016 13:57:45 +0000 Chris Cannam Add a ResamplerWrapper bqresample
Wed, 07 Dec 2016 12:04:57 +0000 Chris Cannam Update subrepo bqresample
Wed, 07 Dec 2016 11:54:02 +0000 Chris Cannam Merge from branch bqaudioio bqresample
Wed, 07 Dec 2016 11:53:44 +0000 Chris Cannam Merge from branch bqresample bqaudioio
Wed, 07 Dec 2016 11:53:19 +0000 Chris Cannam Audio device selection bqresample
Tue, 06 Dec 2016 16:07:22 +0000 Chris Cannam Fix incorrect return to Pulse when too few samples available (caused play hang) bqresample
Tue, 06 Dec 2016 15:59:06 +0000 Chris Cannam Update for bqaudioio changes bqresample
Tue, 06 Dec 2016 09:47:47 +0000 Chris Cannam Add faders svg levelpanwidget
Tue, 06 Dec 2016 09:47:27 +0000 Chris Cannam Some work on play parameters and level controls in property box levelpanwidget
Tue, 06 Dec 2016 09:20:10 +0000 Chris Cannam Switch to level-pan tool button in property box levelpanwidget
Mon, 05 Dec 2016 17:13:01 +0000 Chris Cannam Introduce level-pan widget to property box levelpanwidget
Mon, 05 Dec 2016 17:03:09 +0000 Chris Cannam Merge from branch 3.0-integration levelpanwidget
Mon, 05 Dec 2016 16:54:19 +0000 Chris Cannam Start pruning other resampler logic than bqresample bqresample
Mon, 05 Dec 2016 16:39:03 +0000 Chris Cannam Remove resampler quality option (#1760) 3.0-integration
Mon, 05 Dec 2016 16:29:13 +0000 Chris Cannam Remove full-screen entry on OSX (#1759: SV's full-screen mode interacts badly with OSX full-screen mode) 3.0-integration
Mon, 05 Dec 2016 15:47:40 +0000 Chris Cannam Start incorporating level-pan widgets levelpanwidget
Mon, 05 Dec 2016 14:51:25 +0000 Chris Cannam Another use of WidgetScale more-hidpi
Mon, 05 Dec 2016 14:31:53 +0000 Chris Cannam Some icon updates more-hidpi
Mon, 05 Dec 2016 12:04:23 +0000 Chris Cannam Scale the sizes of a few more UI elements more-hidpi
Fri, 02 Dec 2016 09:14:11 +0000 Chris Cannam Add Apple Lossless files 3.0-integration
Fri, 02 Dec 2016 09:13:52 +0000 Chris Cannam Further updates to tests and debug output for file reading on OSX 3.0-integration
Thu, 01 Dec 2016 20:49:55 +0000 Chris Cannam More faffing with tests, to no great effect 3.0-integration
Thu, 01 Dec 2016 17:45:41 +0000 Chris Cannam Add gapless preference to prefs dialog; much work on audio read tests 3.0-integration
Wed, 30 Nov 2016 21:02:24 +0000 Chris Cannam Update dependency builds for OSX 3.0-integration
Wed, 30 Nov 2016 13:37:53 +0000 Chris Cannam Subrepo update 3.0-integration
Wed, 30 Nov 2016 11:44:40 +0000 Chris Cannam Delete audio I/O objects in a fixed order 3.0-integration
Wed, 30 Nov 2016 11:01:39 +0000 Chris Cannam Bigger colour swatches for bigger fonts 3.0-integration
Wed, 30 Nov 2016 10:54:16 +0000 Chris Cannam Always accept wheel events 3.0-integration
Tue, 29 Nov 2016 17:09:07 +0000 Chris Cannam Another check to ensure sync error suppressed at eof 3.0-integration
Tue, 29 Nov 2016 16:45:53 +0000 Chris Cannam Merge from branch mp3-gapless 3.0-integration
Tue, 29 Nov 2016 16:45:29 +0000 Chris Cannam Stop reporting sync errors only when we really are at eof, i.e. after the input callback has been called again (previously we just tested whether we'd buffered up all the input, which of course we do in one go at the start) mp3-gapless
Tue, 29 Nov 2016 14:35:27 +0000 Chris Cannam Test fixes mp3-gapless
Tue, 29 Nov 2016 14:25:57 +0000 Chris Cannam Update m4a files to exports from CoreAudio, rather than FAAC; update tests accordingly, and add test for spurious data after end of decode mp3-gapless
Tue, 29 Nov 2016 13:34:51 +0000 Chris Cannam Handle trimming the padding from end as well mp3-gapless
Tue, 29 Nov 2016 12:06:49 +0000 Chris Cannam Refactor in CodedAudioFileReader in preparation for trimming at end mp3-gapless
Tue, 29 Nov 2016 11:35:56 +0000 Chris Cannam Add gapless flag to MP3FileReader, and implement trimming the delay samples from the start (padding is not yet trimmed from end) mp3-gapless
Tue, 29 Nov 2016 08:58:50 +0000 Chris Cannam Add test for last change to ColumnOp 3.0-integration
Mon, 28 Nov 2016 18:53:17 +0000 Chris Cannam Add header required when building with FFTW on Windows 3.0-integration
Mon, 28 Nov 2016 18:09:59 +0000 Chris Cannam Further fix to decision about when not to interpolate in ColumnOp::distribute 3.0-integration
Mon, 28 Nov 2016 14:41:52 +0000 Chris Cannam Subrepo merge 3.0-integration
Mon, 28 Nov 2016 14:40:45 +0000 Chris Cannam Interpolate always, when interpolation requested. Previous test failed to take into account varying bin height in log-scale modes, which meant interpolation might be necessary even when more bins than pixels. 3.0-integration
Fri, 25 Nov 2016 11:39:20 +0000 Chris Cannam Merge 3.0-integration
Fri, 25 Nov 2016 11:38:37 +0000 Chris Cannam Update svcore audio reader tests so as to check for truncated decode 3.0-integration
Fri, 25 Nov 2016 10:08:52 +0000 Chris Cannam Merge from branch subdivide-instants 3.0-integration
Fri, 25 Nov 2016 10:08:09 +0000 Chris Cannam Tidy up, with some convenient C++11isms subdivide-instants
Fri, 25 Nov 2016 09:57:36 +0000 Chris Cannam Add Winnow as well subdivide-instants
Fri, 25 Nov 2016 09:38:53 +0000 Chris Cannam Implement "Subdivide Selected Instants". Also add the relabel command to the history, which I previously forgot to do! subdivide-instants
Thu, 24 Nov 2016 17:10:40 +0000 Chris Cannam Fixes to mp3 decode in subrepo. Filter out Xing/LAME info frames, rather than letting them go to the mp3 decoder as if they were audio frames, fixing the 1152-sample zero pad at start of some decoded mp3 files (distinct from decoder delay). Add MAD_BUFFER_GUARD padding at end of mp3 buffer, in order to ensure last frame is decoded successfully (otherwise the decoded audio is truncated). Both gleaned from madplay source code. 3.0-integration
Wed, 23 Nov 2016 10:39:45 +0000 Chris Cannam Fix various column edge cases 3.0-integration
Tue, 22 Nov 2016 16:41:17 +0000 Chris Cannam Ordered config -- avoid sub-builds clobbering one another 3.0-integration
Mon, 21 Nov 2016 15:33:13 +0000 Chris Cannam Merge subrepos 3.0-integration
Mon, 21 Nov 2016 15:32:15 +0000 Chris Cannam Merge from branch bqfft 3.0-integration
Mon, 21 Nov 2016 15:05:57 +0000 Chris Cannam Branch to use bqfft code and remove FFTapi bqfft
Fri, 18 Nov 2016 23:30:37 +0000 Chris Cannam Subrepo update 3.0-integration
Fri, 18 Nov 2016 14:30:52 +0000 Chris Cannam Vamp SDK update 3.0-integration
Fri, 18 Nov 2016 12:53:21 +0000 Chris Cannam Fix fairly obscure mis-canonicalisation in RealTime (leading to non-canonical but still correct values) 3.0-integration
Thu, 17 Nov 2016 18:10:46 +0000 Chris Cannam Fix path in deploy script 3.0-integration
Thu, 17 Nov 2016 17:57:50 +0000 Chris Cannam Avoid building app bundles for helper executables 3.0-integration
Thu, 17 Nov 2016 17:47:29 +0000 Chris Cannam Use own scaling 3.0-integration
Thu, 17 Nov 2016 14:46:03 +0000 Chris Cannam Further column op tests and fixes 3.0-integration
Thu, 17 Nov 2016 14:33:20 +0000 Chris Cannam Tests and fixes for distribute(). Although this version of interpolated distribution passes these tests, it isn't right visually -- the expected values in the tests are offset. To be continued. 3.0-integration
Thu, 17 Nov 2016 11:56:54 +0000 Chris Cannam Start tests for ColumnOp (+ some resulting fixes) 3.0-integration
Wed, 16 Nov 2016 16:24:12 +0000 Chris Cannam Ah, this version should have been 2 3.0-integration
Wed, 16 Nov 2016 16:13:30 +0000 Chris Cannam Subrepo update 3.0-integration
Wed, 16 Nov 2016 16:12:42 +0000 Chris Cannam Debug output improvements, and make the checker actually attempt to call the descriptor function for known plugin types 3.0-integration
Tue, 15 Nov 2016 16:54:02 +0000 Chris Cannam Test fixes 3.0-integration
Tue, 15 Nov 2016 16:12:48 +0000 Chris Cannam RealTime fixes to comply with new, more demanding tests; also run same (failing) tests on Vamp SDK version 3.0-integration
Tue, 15 Nov 2016 09:12:58 +0000 Chris Cannam Run tests 3.0-integration
Mon, 14 Nov 2016 17:54:22 +0000 Chris Cannam Remove some no-longer-used project files 3.0-integration
Mon, 14 Nov 2016 17:53:16 +0000 Chris Cannam Rearrange svcore tests so they can all be built from the top level 3.0-integration
Mon, 14 Nov 2016 15:00:29 +0000 Chris Cannam Further RealTime test (currently failing) 3.0-integration
Mon, 14 Nov 2016 14:29:10 +0000 Chris Cannam Re-enable unit tests 3.0-integration
Thu, 10 Nov 2016 09:58:28 +0000 Chris Cannam More timings and cache hit counts 3.0-integration
Thu, 10 Nov 2016 09:23:05 +0000 Chris Cannam A note on cache hit findings 3.0-integration
Wed, 09 Nov 2016 18:08:40 +0000 Chris Cannam Print out cache hit/miss counts 3.0-integration
Tue, 08 Nov 2016 14:55:53 +0000 Chris Cannam Use peak cache at one zoom level lower (since it exists at that level already -- this is a >= vs > question) + make naming more uniform 3.0-integration
Sat, 05 Nov 2016 10:41:41 +0000 Chris Cannam Merge from branch piper 3.0-integration
Sat, 05 Nov 2016 10:40:22 +0000 Chris Cannam Avoid assigning model resolution of 0 to models coming from plugins that report weirdly high output rates (symptom: data did not show up in edit layer data dialog, as the row/frame conversion failed) piper
Fri, 04 Nov 2016 16:44:59 +0000 Chris Cannam Fix omitted topmost bin 3.0-integration
Fri, 04 Nov 2016 16:32:41 +0000 Chris Cannam Fix forehead-slapping failure to use the right model when rendering 3d plot in peaks cache mode (i.e. when zoomed quite far out) 3.0-integration
Fri, 04 Nov 2016 16:01:37 +0000 Chris Cannam Ensure columns all have correct height when retrieved (to avoid e.g. empty columns because a feature extractor's start time was >0) 3.0-integration
Fri, 04 Nov 2016 14:57:03 +0000 Chris Cannam Merge from branch piper 3.0-integration
Fri, 04 Nov 2016 14:39:15 +0000 Chris Cannam Some updates to accommodate adaptation for Sonic Annotator piper
Fri, 04 Nov 2016 10:54:00 +0000 Chris Cannam Update subrepos to default branches after merge piper
Thu, 03 Nov 2016 16:42:47 +0000 Chris Cannam A bit more log info useful for win32/x64 piper
Thu, 03 Nov 2016 15:38:17 +0000 Chris Cannam Update to use listargs variant of Piper stuff (so that the plugin winnowing feature from the penultimate commit actually works) piper
Thu, 03 Nov 2016 14:57:00 +0000 Chris Cannam Make SVDEBUG always write to a log file -- formerly this was disabled in NDEBUG builds. I think there's little use to that, it just means that we keep adding more cerr debug output because we aren't getting the log we need. And SVDEBUG logging is not usually used in tight loops, I don't think the performance overhead is too serious. piper
Thu, 03 Nov 2016 14:14:09 +0000 Chris Cannam Use plugin scan results to inform the list requests issued to Piper servers piper
Wed, 02 Nov 2016 14:35:17 +0000 Chris Cannam Merge piper
Wed, 02 Nov 2016 14:34:41 +0000 Chris Cannam Subrepo state piper
Tue, 01 Nov 2016 16:02:15 +0000 Chris Cannam Logging; use only first ("native") helper for non-Vamp plugins piper
Tue, 01 Nov 2016 15:09:44 +0000 Chris Cannam More useful reporting output piper
Tue, 01 Nov 2016 14:43:51 +0000 Chris Cannam Add omitted files, again! piper
Tue, 01 Nov 2016 14:08:57 +0000 Chris Cannam Merge from branch 3.0-integration piper
Tue, 01 Nov 2016 14:06:47 +0000 Chris Cannam Support multiple plugin checker helpers, as for multiple piper servers 3.0-integration
Tue, 01 Nov 2016 12:09:05 +0000 Chris Cannam Support for multiple servers 3.0-integration
Fri, 28 Oct 2016 15:20:58 +0100 Chris Cannam Merge from branch piper 3.0-integration
Fri, 28 Oct 2016 15:19:12 +0100 Chris Cannam Merge from branch project-file-rework piper
Fri, 28 Oct 2016 14:32:45 +0100 Chris Cannam Numerous Windows fixes in subrepos project-file-rework
Fri, 28 Oct 2016 11:32:36 +0100 Chris Cannam Ensure plugin is deleted in same thread that created and used it project-file-rework
Fri, 28 Oct 2016 11:32:22 +0100 Chris Cannam Don't -Werror here project-file-rework
Fri, 28 Oct 2016 11:08:17 +0100 Chris Cannam Rename server to simple-server, and add some more description in usage project-file-rework
Thu, 27 Oct 2016 16:14:49 +0100 Chris Cannam Win32 fixes in subrepos (inc binary modes for server) project-file-rework
Thu, 27 Oct 2016 14:01:35 +0100 Chris Cannam Error handling project-file-rework
Thu, 27 Oct 2016 13:42:21 +0100 Chris Cannam Build the converter too project-file-rework
Thu, 27 Oct 2016 12:06:14 +0100 Chris Cannam Update Piper server invocation convention project-file-rework
Thu, 27 Oct 2016 10:29:44 +0100 Chris Cannam More Windows build bits project-file-rework
Wed, 26 Oct 2016 11:57:13 +0100 Chris Cannam Win64 build flags project-file-rework
Tue, 25 Oct 2016 21:19:48 +0100 Chris Cannam Couple of overlooked defines project-file-rework
Tue, 25 Oct 2016 21:10:48 +0100 Chris Cannam Tidier noconfig file project-file-rework
Tue, 25 Oct 2016 21:06:38 +0100 Chris Cannam Fix maddening failure to start server with space in its path project-file-rework
Tue, 25 Oct 2016 15:51:55 +0100 Chris Cannam Only if server not running project-file-rework
Tue, 25 Oct 2016 15:51:24 +0100 Chris Cannam Don't need these frameworks for the server project-file-rework
Tue, 25 Oct 2016 15:32:41 +0100 Chris Cannam Tidying project-file-rework
Tue, 25 Oct 2016 15:29:01 +0100 Chris Cannam Minor build updates project-file-rework
Tue, 25 Oct 2016 14:58:36 +0100 Chris Cannam OSX build updates project-file-rework
Tue, 25 Oct 2016 14:48:56 +0100 Chris Cannam OSX build fixes and logic project-file-rework
Tue, 25 Oct 2016 13:07:36 +0100 Chris Cannam Add basic noconfig.pri project-file-rework
Tue, 25 Oct 2016 11:06:00 +0100 Chris Cannam Merge from branch piper project-file-rework
Tue, 25 Oct 2016 11:02:03 +0100 Chris Cannam Merge piper
Tue, 25 Oct 2016 10:53:12 +0100 Chris Cannam Add files that I forgot to track on Friday (sigh) piper
Mon, 24 Oct 2016 17:54:50 +0100 Chris Cannam Merge in subrepo project-file-rework
Mon, 24 Oct 2016 17:53:33 +0100 Chris Cannam Cut down vastly on the number of config.pri files and places where their contents has to be effectively duplicated without them project-file-rework
Mon, 24 Oct 2016 10:52:51 +0100 Chris Cannam Server project file piper
Fri, 21 Oct 2016 16:24:30 +0100 Chris Cannam Error reporting for Piper server startup piper
Fri, 21 Oct 2016 14:51:22 +0100 Chris Cannam Fixes to choice of plugin factory piper
Fri, 21 Oct 2016 14:40:48 +0100 Chris Cannam Add out-of-process execution to prefs dialog piper
Fri, 21 Oct 2016 11:59:14 +0100 Chris Cannam Default to using Piper piper
Fri, 21 Oct 2016 11:49:27 +0100 Chris Cannam Restore native-Vamp factory and make the choice between Piper and Native a preference piper
Thu, 20 Oct 2016 18:35:09 +0100 Chris Cannam Use .cpp file instead piper
Thu, 20 Oct 2016 14:07:21 +0100 Chris Cannam Avoid instantiating all plugins on startup, + build fixes piper
Thu, 20 Oct 2016 11:21:44 +0100 Chris Cannam Update subrepos 3.0-integration
Thu, 20 Oct 2016 11:21:01 +0100 Chris Cannam Update subrepos piper
Thu, 20 Oct 2016 11:19:34 +0100 Chris Cannam Merge from branch 3.0-integration piper
Thu, 20 Oct 2016 11:16:55 +0100 Chris Cannam Merge from branch msvc2015_64 3.0-integration
Wed, 19 Oct 2016 17:33:32 +0100 Chris Cannam Further MSVC build stuff. Committing this as-is because it's building and running now, but there's a lot to tidy up. msvc2015_64
Wed, 19 Oct 2016 09:11:51 +0100 Chris Cannam Tidy and re-fix for Linux msvc2015_64
Tue, 18 Oct 2016 15:59:42 +0100 Chris Cannam MSVC build fixes, and show 32/64-bit in About msvc2015_64
Tue, 18 Oct 2016 14:03:35 +0100 Chris Cannam MatrixFile is no longer used 3.0-integration
Mon, 17 Oct 2016 18:56:28 +0100 Chris Cannam Update subrepo piper
Mon, 17 Oct 2016 16:41:07 +0100 Chris Cannam Update subrepo piper
Mon, 17 Oct 2016 16:39:36 +0100 Chris Cannam Fix compiler warnings piper
Mon, 17 Oct 2016 14:55:05 +0100 Chris Cannam Restore plugin categories piper
Mon, 17 Oct 2016 14:28:43 +0100 Chris Cannam More cautious locking on sparse model modification piper
Mon, 17 Oct 2016 14:18:23 +0100 Chris Cannam Pull out model creation into the transformer thread run(), so that all communications with the plugin server happen on a single thread. Then make the model accessor wait for them to be created (which still happens right at the start of processing) before returning. piper
Fri, 14 Oct 2016 16:23:04 +0100 Chris Cannam Try AutoPlugin; also not very successful piper
Fri, 14 Oct 2016 14:34:25 +0100 Chris Cannam Add piper-cpp stuff, experimentally piper
Tue, 20 Sep 2016 09:28:03 +0100 Chris Cannam Update subrepos (bookkeeping only really) 3.0-integration
Mon, 15 Aug 2016 16:45:17 +0100 Chris Cannam Patch from Fab Nicol to fix a problem with Recent Files menu: 3.0-integration
Mon, 15 Aug 2016 16:42:19 +0100 Chris Cannam Avoid warning 3.0-integration
Fri, 05 Aug 2016 17:48:52 +0100 Chris Cannam Introduce labels in RangeMapper and use them in AudioDial, though only for tooltip at present. Make use of this for spectrogram magic -81dB/-Inf threshold. Also introduce static strings for inf/pi and use where appropriate. 3.0-integration
Fri, 05 Aug 2016 15:05:02 +0100 Chris Cannam Merge work on unified spectrogram and colour 3d plot caching renderer 3.0-integration
Fri, 05 Aug 2016 14:54:24 +0100 Chris Cannam Since 1d317e717fe4 we no longer want to fft scale in hybrid mode. (This might also restore compatibility with Tony and prior SV save sessions -- test this.) spectrogram-minor-refactor