Thu, 22 Nov 2018 14:56:18 +0000 |
Chris Cannam |
Fixes from clang modernize-use-override
fix-static-analysis
|
Wed, 21 Nov 2018 12:30:40 +0000 |
Chris Cannam |
Deb fixes
|
Wed, 21 Nov 2018 11:55:01 +0000 |
Chris Cannam |
Fix some typos in deb scripts
|
Wed, 21 Nov 2018 11:41:54 +0000 |
Chris Cannam |
File extension
|
Wed, 21 Nov 2018 11:26:12 +0000 |
Chris Cannam |
+x
|
Wed, 21 Nov 2018 11:25:43 +0000 |
Chris Cannam |
Experimental Docker deb package build
|
Fri, 16 Nov 2018 14:32:41 +0000 |
Chris Cannam |
Added tag sv_v3.2pre1 for changeset 3fc52a2fadce
|
Fri, 16 Nov 2018 09:52:37 +0000 |
Chris Cannam |
This seems to be necessary in order to bail out properly
sv_v3.2pre1
|
Fri, 16 Nov 2018 09:47:05 +0000 |
Chris Cannam |
This actual release will be pre1
|
Fri, 16 Nov 2018 09:02:23 +0000 |
Chris Cannam |
Update translation strings again
|
Fri, 16 Nov 2018 09:02:16 +0000 |
Chris Cannam |
Make horizontal wheeling a bit less crazily fast in the absence of fine delta information
|
Thu, 15 Nov 2018 15:26:12 +0000 |
Chris Cannam |
Update CHANGELOG
|
Thu, 15 Nov 2018 15:08:30 +0000 |
Chris Cannam |
Retain consistent min freq (rather than min bin no) when changing fft parameters in spectrum; scale ffts by window size rather than fft size in case of oversampling, to avoid fading out because of scale factor including zero padding
|
Thu, 15 Nov 2018 14:22:02 +0000 |
Chris Cannam |
Handle integer pixel scaling as well
|
Thu, 15 Nov 2018 14:04:56 +0000 |
Chris Cannam |
Scale pen for retina display on macOS as well as for hidpi display elsewhere
|
Thu, 15 Nov 2018 14:00:42 +0000 |
Chris Cannam |
LTO on macOS as well
|
Thu, 15 Nov 2018 13:07:00 +0000 |
Chris Cannam |
Slice layer reworking, again
|
Thu, 15 Nov 2018 13:05:20 +0000 |
Chris Cannam |
Experiment with LTO on gcc build
|
Thu, 15 Nov 2018 09:03:51 +0000 |
Chris Cannam |
AppVeyor updated to 5.11.2 I see
|
Wed, 14 Nov 2018 15:49:27 +0000 |
Chris Cannam |
Remove oversampling from prefs, now it's in spectrogram layer properties; fixes to spectrum x-axis calculations
|
Wed, 14 Nov 2018 15:14:42 +0000 |
Chris Cannam |
We need to draw illumination label *after* the spectrum...
|
Wed, 14 Nov 2018 15:04:16 +0000 |
Chris Cannam |
Fix some incorrect pixel scaling
|
Wed, 14 Nov 2018 14:29:46 +0000 |
Chris Cannam |
Minor subrepo update
|
Wed, 14 Nov 2018 14:28:38 +0000 |
Chris Cannam |
Merge from branch spectrogramparam
|
Wed, 14 Nov 2018 14:17:29 +0000 |
Chris Cannam |
Fixes to spectrum log scale, etc
spectrogramparam
|
Wed, 14 Nov 2018 11:01:38 +0000 |
Chris Cannam |
Highlight the current peak line in the spectrum (when shown); also a fix to the crosshair labelling
spectrogramparam
|
Tue, 13 Nov 2018 15:17:09 +0000 |
Chris Cannam |
Toward highlighting peaks on spectrum
spectrogramparam
|
Tue, 13 Nov 2018 14:49:11 +0000 |
Chris Cannam |
Move layer name text up a bit when rendering on a layer with a horizontal scale (i.e. spectrum)
spectrogramparam
|
Tue, 13 Nov 2018 14:09:30 +0000 |
Chris Cannam |
Ensure that operations that need to iterate through action maps in order (most pointedly MainWindow::updateLayerShortcutsFor) get to do it in order of construction and not arbitrary pointer order. Fixes incorrect shortcut associations for add-layer/pane shortcuts in some cases
spectrogramparam
|
Tue, 13 Nov 2018 14:09:25 +0000 |
Chris Cannam |
Fixes to spectrum peak picking, & make zoom-to-region work sensibly there
spectrogramparam
|
Mon, 12 Nov 2018 14:49:08 +0000 |
Chris Cannam |
Spectrum speedups
spectrogramparam
|
Mon, 12 Nov 2018 11:35:03 +0000 |
Chris Cannam |
Use log-frequency rather than log-bin for calculating x coord in spectrum. This has the advantage that frequency positions don't move when we change the window size or oversampling ratio, but it does give us an unhelpfully large amount of space for very low frequencies - to be considered
spectrogramparam
|
Mon, 12 Nov 2018 11:33:00 +0000 |
Chris Cannam |
Merge from default branch
spectrogramparam
|
Fri, 09 Nov 2018 15:40:23 +0000 |
Chris Cannam |
Subrepo updates
|
Fri, 09 Nov 2018 15:23:24 +0000 |
Chris Cannam |
Merge
|
Fri, 09 Nov 2018 15:23:02 +0000 |
Chris Cannam |
Add code-signing support
|
Fri, 09 Nov 2018 15:05:17 +0000 |
Chris Cannam |
Force black text for version number on splash screen - otherwise it disappears in macOS dark mode
|
Thu, 08 Nov 2018 15:05:22 +0000 |
Chris Cannam |
Much faster peak picking in spectrum
spectrogramparam
|
Thu, 08 Nov 2018 11:12:33 +0000 |
Chris Cannam |
Fixes to "colour" rendering mode for spectrum
spectrogramparam
|
Wed, 07 Nov 2018 16:03:19 +0000 |
Chris Cannam |
Implement oversampling in spectrum, + various spectrum rendering improvements
spectrogramparam
|
Tue, 06 Nov 2018 15:46:00 +0000 |
Chris Cannam |
Merge in subrepo
spectrogramparam
|
Tue, 06 Nov 2018 15:43:27 +0000 |
Chris Cannam |
Merge from default branch
spectrogramparam
|
Tue, 06 Nov 2018 15:43:12 +0000 |
Chris Cannam |
Make context help explain how to adjust & reset
|
Tue, 06 Nov 2018 13:38:42 +0000 |
Chris Cannam |
Experimental Oversampling parameter
spectrogramparam
|
Tue, 06 Nov 2018 11:19:32 +0000 |
Chris Cannam |
Merge from branch zoom
|
Tue, 06 Nov 2018 11:12:37 +0000 |
Chris Cannam |
Fix incorrect start/end overlay drawing when zoomed far in
zoom
|
Tue, 06 Nov 2018 10:43:23 +0000 |
Chris Cannam |
Merge from default branch
zoom
|
Mon, 05 Nov 2018 13:36:05 +0000 |
Chris Cannam |
Carry out EPERM test only if Apple
|
Mon, 05 Nov 2018 13:31:32 +0000 |
Chris Cannam |
Scaling tweaks
|
Mon, 05 Nov 2018 13:30:08 +0000 |
Chris Cannam |
Update translations again
|
Fri, 02 Nov 2018 15:24:15 +0000 |
Chris Cannam |
Small rendering improvements for waveform
|
Fri, 02 Nov 2018 14:45:13 +0000 |
Chris Cannam |
Update for checker handling for security errors, etc
|
Fri, 02 Nov 2018 14:44:12 +0000 |
Chris Cannam |
Merge
|
Fri, 02 Nov 2018 14:43:09 +0000 |
Chris Cannam |
Deployment tweaks
|
Fri, 02 Nov 2018 14:42:48 +0000 |
Chris Cannam |
Use a slightly more compact dialog (esp on Mac)
|
Fri, 02 Nov 2018 14:38:49 +0000 |
Chris Cannam |
Notes on notarization
|
Thu, 01 Nov 2018 15:16:19 +0000 |
Chris Cannam |
Update translations
|
Thu, 01 Nov 2018 15:12:04 +0000 |
Chris Cannam |
Fix failure to show proper initial state of layer level/pan
|
Thu, 01 Nov 2018 15:02:17 +0000 |
Chris Cannam |
Fix incorrect completion reporting for alignment models reloaded from session file
|
Thu, 01 Nov 2018 14:30:38 +0000 |
Chris Cannam |
Stop playback when New Session invoked
|
Thu, 01 Nov 2018 14:07:51 +0000 |
Chris Cannam |
Check Piper server version
|
Thu, 01 Nov 2018 13:21:41 +0000 |
Chris Cannam |
Ugh, and this one. What a doofus
|
Thu, 01 Nov 2018 12:58:30 +0000 |
Chris Cannam |
Remove 32-bit element
|
Thu, 01 Nov 2018 10:56:58 +0000 |
Chris Cannam |
Parse this one earlier, to avoid trying to connect to a display first
|
Thu, 01 Nov 2018 10:43:17 +0000 |
Chris Cannam |
Experiment with a custom AppRun that doesn't have to chdir
|
Thu, 01 Nov 2018 10:19:43 +0000 |
Chris Cannam |
Just run --version, don't try to connect to display
|
Thu, 01 Nov 2018 10:18:51 +0000 |
Chris Cannam |
... or -v
|
Thu, 01 Nov 2018 10:18:13 +0000 |
Chris Cannam |
Merge
|
Thu, 01 Nov 2018 10:18:07 +0000 |
Chris Cannam |
Add --version option
|
Wed, 31 Oct 2018 15:09:11 +0000 |
Chris Cannam |
Rework waveform renderer to use smooth paths, aiming to get near-pixel-identical results when zoomed out far enough for a single path not to be relevant
|
Tue, 30 Oct 2018 16:23:29 +0000 |
Chris Cannam |
Fix the mix/merge channels behaviour in pixels-per-frame zone
|
Tue, 30 Oct 2018 15:58:25 +0000 |
Chris Cannam |
Add some more scalable icons, + subrepo update
|
Tue, 30 Oct 2018 14:00:39 +0000 |
Chris Cannam |
Fix inconsistency between centre frame actually set and centre frame notified as set, which caused the start frame location to creep out of place gradually as you page through
|
Thu, 18 Oct 2018 13:51:04 +0100 |
Chris Cannam |
Update CHANGELOG
|
Thu, 18 Oct 2018 13:23:58 +0100 |
Chris Cannam |
Add more colour maps, + related changes in subrepos
|
Thu, 18 Oct 2018 13:22:50 +0100 |
Chris Cannam |
Add four more scalable SVGs
|
Wed, 17 Oct 2018 15:58:13 +0100 |
Chris Cannam |
Rename piper-cpp subrepo to piper-vamp-cpp to match the upstream repo name
|
Wed, 17 Oct 2018 15:50:33 +0100 |
Chris Cannam |
Update Piper client/server with Nyquist-bin fix
|
Mon, 15 Oct 2018 15:51:40 +0100 |
Chris Cannam |
Further work on #1773 "Loading a session with features extracted from multiplexed inputs". Re-read the aggregate wave models from the session file; also re-order the way they are written so as to improve the likelihood of successfully re-reading them (! - as it stood before, there was some chance involved)
|
Fri, 12 Oct 2018 11:18:06 +0100 |
Chris Cannam |
Housekeeping merge
|
Fri, 12 Oct 2018 11:15:09 +0100 |
Chris Cannam |
Merge
zoom
|
Fri, 12 Oct 2018 11:14:16 +0100 |
Chris Cannam |
Merge from default branch
zoom
|
Fri, 12 Oct 2018 11:13:23 +0100 |
Chris Cannam |
Subrepo updates
|
Thu, 11 Oct 2018 19:06:37 +0100 |
Chris Cannam |
Adjust Help menu - the What's New is genuinely useful I think so make it more obvious, and "SV on the Web" is not all that useful and is more intuitively found via the About box
|
Thu, 11 Oct 2018 18:47:30 +0100 |
Chris Cannam |
Merge in subrepo
|
Thu, 11 Oct 2018 15:56:15 +0100 |
Chris Cannam |
Fix compiler error for undeclared std exception
|
Thu, 11 Oct 2018 15:00:57 +0100 |
Chris Cannam |
Rework cache and some OSX-related details
|
Thu, 11 Oct 2018 10:16:09 +0100 |
Chris Cannam |
Fix ugly text positioning
|
Wed, 10 Oct 2018 14:53:36 +0100 |
Chris Cannam |
Remove some debug
|
Wed, 10 Oct 2018 14:34:22 +0100 |
Chris Cannam |
Use finer zoom levels for mouse-wheel zooming, as was already the case for the thumbwheel. Also extend thumbwheel to support pixels-per-frame
|
Wed, 10 Oct 2018 08:58:20 +0100 |
Chris Cannam |
Merge from branch zoom
|
Tue, 09 Oct 2018 16:02:04 +0100 |
Chris Cannam |
Subrepo update
zoom
|
Wed, 03 Oct 2018 15:46:18 +0100 |
Chris Cannam |
Show default name for unlabelled bin
|
Wed, 03 Oct 2018 13:00:38 +0100 |
Chris Cannam |
Fix invisible cancel buttons
|
Tue, 02 Oct 2018 16:41:23 +0100 |
Chris Cannam |
Minor debug output change
|
Tue, 02 Oct 2018 11:58:27 +0100 |
Chris Cannam |
Fixes to handling of plugin stdouts
|
Mon, 01 Oct 2018 15:49:32 +0100 |
Chris Cannam |
Merge from default branch
zoom
|
Mon, 01 Oct 2018 14:47:03 +0100 |
Chris Cannam |
Avoid blowing up when faced with min==max in plugin parameter range
|
Mon, 01 Oct 2018 14:38:53 +0100 |
Chris Cannam |
Use locale-aware comparators - ensuring proper dictionary order for e.g. pYin with small "p"
|
Mon, 01 Oct 2018 14:38:30 +0100 |
Chris Cannam |
Minor tidy
|
Fri, 28 Sep 2018 18:32:13 +0100 |
Chris Cannam |
Various zoom fixes
zoom
|
Thu, 27 Sep 2018 16:22:01 +0100 |
Chris Cannam |
Fix crash
zoom
|
Thu, 27 Sep 2018 15:54:46 +0100 |
Chris Cannam |
Further TimeRuler fixes
zoom
|
Thu, 27 Sep 2018 15:20:46 +0100 |
Chris Cannam |
Fixes for TimeRuler and WaveformLayer
zoom
|
Wed, 26 Sep 2018 15:13:51 +0100 |
Chris Cannam |
Oversampler fixes
zoom
|
Wed, 26 Sep 2018 14:45:49 +0100 |
Chris Cannam |
Waveform oversampling tests
zoom
|
Wed, 26 Sep 2018 11:54:46 +0100 |
Chris Cannam |
Add custom waveform oversampler method
zoom
|
Tue, 25 Sep 2018 16:39:12 +0100 |
Chris Cannam |
Get oversampled rendering almost working
zoom
|
Mon, 24 Sep 2018 14:41:05 +0100 |
Chris Cannam |
Toward oversampling rendering
zoom
|
Thu, 20 Sep 2018 15:43:31 +0100 |
Chris Cannam |
Branch
zoom
|
Thu, 20 Sep 2018 11:45:55 +0100 |
Chris Cannam |
ZoomLevel fixes
zoom
|
Thu, 20 Sep 2018 10:46:01 +0100 |
Chris Cannam |
More ZoomLevel updates
zoom
|
Wed, 19 Sep 2018 15:42:49 +0100 |
Chris Cannam |
Gradual ZoomLevel updates
zoom
|
Mon, 17 Sep 2018 14:05:41 +0100 |
Chris Cannam |
Merge from default branch
zoom
|
Mon, 17 Sep 2018 13:53:25 +0100 |
Chris Cannam |
Merge, + null out piper-cpp subrepo
zoom
|
Mon, 17 Sep 2018 13:23:06 +0100 |
Chris Cannam |
Avoid compiler warning
|
Fri, 14 Sep 2018 14:48:06 +0100 |
Chris Cannam |
Various CSV format tests
|
Fri, 14 Sep 2018 09:25:35 +0100 |
Chris Cannam |
Some CSV format tests and minor fixes
|
Wed, 12 Sep 2018 18:49:53 +0100 |
Chris Cannam |
Win32 fix
|
Wed, 12 Sep 2018 16:07:06 +0100 |
Chris Cannam |
Update CHANGELOG
|
Wed, 12 Sep 2018 16:05:29 +0100 |
Chris Cannam |
Importing -> Converting
|
Wed, 12 Sep 2018 15:59:39 +0100 |
Chris Cannam |
Merge from branch import-audio-data
|
Wed, 12 Sep 2018 15:43:12 +0100 |
Chris Cannam |
Ensure data files used as import sources don't end up in Recent Files
import-audio-data
|
Wed, 12 Sep 2018 15:29:01 +0100 |
Chris Cannam |
Rely more heavily on the "value"-column estimation from CSVFormat to determine which columns might contain sample data when importing audio from CSV; this makes things a bit more consistent, & can easily enough be overridden
import-audio-data
|
Wed, 12 Sep 2018 13:58:33 +0100 |
Chris Cannam |
When importing audio from data files with normalisation, normalise on write instead of when re-reading (so that the session does the right thing when reloaded)
import-audio-data
|
Tue, 11 Sep 2018 14:40:29 +0100 |
Chris Cannam |
Subrepo updates for recorded/converted audio file paths
import-audio-data
|
Tue, 11 Sep 2018 14:38:21 +0100 |
Chris Cannam |
Menu wording and file-path handling fixes for recording/converting audio
import-audio-data
|
Sat, 08 Sep 2018 20:54:11 +0100 |
Chris Cannam |
Implement range options for audio import from CSV
import-audio-data
|
Fri, 07 Sep 2018 18:13:26 +0100 |
Chris Cannam |
Remove sample range from dialog class now that it's in CSVFormat
import-audio-data
|
Fri, 07 Sep 2018 16:55:46 +0100 |
Chris Cannam |
Add sample-range support to CSVFormat
import-audio-data
|
Fri, 07 Sep 2018 16:15:49 +0100 |
Chris Cannam |
Range and normalisation work
import-audio-data
|
Thu, 06 Sep 2018 16:27:01 +0100 |
Chris Cannam |
Add sample range support
import-audio-data
|
Thu, 06 Sep 2018 13:58:45 +0100 |
Chris Cannam |
Use newly-introduced CSVAudioFormatDialog for audio import instead of CSVFormatDialog
import-audio-data
|
Thu, 06 Sep 2018 12:35:37 +0100 |
Chris Cannam |
CSV format dialog updates
import-audio-data
|
Thu, 06 Sep 2018 12:35:11 +0100 |
Chris Cannam |
Use CSV format dialog for importing audio data, + some text changes
import-audio-data
|
Wed, 05 Sep 2018 11:57:10 +0100 |
Chris Cannam |
Treat every numeric column as a value when importing raw audio data
import-audio-data
|
Tue, 04 Sep 2018 14:19:32 +0100 |
Chris Cannam |
Fix crash (leaving opaque error message) when attempting to load audio from a CSV file without any appropriate contents
import-audio-data
|
Tue, 04 Sep 2018 14:10:47 +0100 |
Chris Cannam |
Merge from default branch
import-audio-data
|
Tue, 04 Sep 2018 11:33:36 +0100 |
Chris Cannam |
Merge in subrepos from branch avoid-pointer-keys
|
Mon, 03 Sep 2018 16:15:44 +0100 |
Chris Cannam |
Win32 helper fixes
|
Mon, 03 Sep 2018 10:27:32 +0100 |
Chris Cannam |
Update redist locations, + comment
|
Fri, 31 Aug 2018 15:36:46 +0100 |
Chris Cannam |
Next version, provisionally, 3.2
|
Fri, 31 Aug 2018 15:24:10 +0100 |
Chris Cannam |
Merge from branch checker_errorcode
|
Fri, 31 Aug 2018 15:14:27 +0100 |
Chris Cannam |
Merge from branch c++14
|
Fri, 31 Aug 2018 13:52:30 +0100 |
Chris Cannam |
v0.6.1, not 0.6.0
c++14
|
Fri, 31 Aug 2018 13:41:27 +0100 |
Chris Cannam |
Requiring c++14 is not going to work for Travis (because we want to support a Qt version too old to know about the c++14 config flag) or for our AppImage build (because we want to run on distros to old to support the relevant gcc ABI). So instead we try to confine the C++ standard selection to one place (config/noconfig) and revert to c++11 if the compiler is too old to know about c++14. All of the actual SV code remains c++11, and we assume we build against an older version of capnproto when we want to perform a c++11 build.
c++14
|
Fri, 31 Aug 2018 12:16:59 +0100 |
Chris Cannam |
Forgot a sudo
c++14
|
Fri, 31 Aug 2018 12:11:46 +0100 |
Chris Cannam |
Checker fixes
checker_errorcode
|
Fri, 31 Aug 2018 12:02:52 +0100 |
Chris Cannam |
OK, try explicitly re-linking these here as well
c++14
|
Fri, 31 Aug 2018 11:55:02 +0100 |
Chris Cannam |
Add missed ppa; try setting CC/CXX directly
c++14
|
Fri, 31 Aug 2018 11:45:51 +0100 |
Chris Cannam |
Attempt to update AppImage and Travis build files for c++14
c++14
|
Fri, 31 Aug 2018 10:15:16 +0100 |
Chris Cannam |
Try 0.7.0
c++14
|
Fri, 31 Aug 2018 10:02:48 +0100 |
Chris Cannam |
Switch experimentally to C++14 throughout
c++14
|
Thu, 30 Aug 2018 12:59:46 +0100 |
Chris Cannam |
Avoid reporting failure when everything in fact succeeded!
checker_errorcode
|
Thu, 30 Aug 2018 12:33:25 +0100 |
Chris Cannam |
Further error handling in checker
checker_errorcode
|
Wed, 29 Aug 2018 17:45:33 +0100 |
Chris Cannam |
Return and use error codes from plugin checker
checker_errorcode
|
Tue, 14 Aug 2018 09:43:28 +0100 |
Chris Cannam |
Added tag sv_v3.1.1 for changeset 690eaf241ad5
|
Tue, 14 Aug 2018 09:43:23 +0100 |
Chris Cannam |
Merge
sv_v3.1.1
|
Mon, 13 Aug 2018 19:18:08 +0100 |
Chris Cannam |
Version updates
|
Tue, 14 Aug 2018 09:39:49 +0100 |
Chris Cannam |
Added tag sv_v3.1.1 for changeset 4ff2193314d4
|
Tue, 14 Aug 2018 08:23:56 +0100 |
Chris Cannam |
Merge
|
Tue, 14 Aug 2018 08:23:19 +0100 |
Chris Cannam |
Copyright dates
|
Mon, 13 Aug 2018 16:46:14 +0100 |
Chris Cannam |
Branch in subrepos
avoid-pointer-keys
|
Mon, 13 Aug 2018 15:42:29 +0100 |
Chris Cannam |
Update CHANGELOG
|
Mon, 13 Aug 2018 15:40:11 +0100 |
Chris Cannam |
Fix failure to run effects plugins
|
Mon, 13 Aug 2018 14:14:59 +0100 |
Chris Cannam |
Fix failure to stop playback of notes that are playing when a loop boundary is reached
|
Thu, 09 Aug 2018 16:46:36 +0100 |
Chris Cannam |
Update subrepos
|
Thu, 09 Aug 2018 16:10:21 +0100 |
Chris Cannam |
Tidy edges of scale area on Mac
|
Thu, 09 Aug 2018 11:08:08 +0100 |
Chris Cannam |
Require v0.6.1 for old-Linux-image Docker build for AppImage as well
|
Thu, 09 Aug 2018 11:06:07 +0100 |
Chris Cannam |
Include both copies of icon
|
Thu, 09 Aug 2018 10:56:52 +0100 |
Chris Cannam |
Force older version of capnp for this older compiler on the Linux travis image
|
Thu, 09 Aug 2018 10:55:54 +0100 |
Chris Cannam |
Install desktop and icon files
|
Thu, 09 Aug 2018 10:49:14 +0100 |
Chris Cannam |
Copy icon file to sonic-visualiser.svg
|
Thu, 09 Aug 2018 09:48:33 +0100 |
Chris Cannam |
Next version will be 3.1.1
|
Thu, 09 Aug 2018 09:48:26 +0100 |
Chris Cannam |
Use HFS+ for dmg image volume
|
Wed, 08 Aug 2018 15:27:08 +0100 |
Chris Cannam |
Fixes to recording, especially when no other model yet loaded
|
Tue, 07 Aug 2018 17:02:03 +0100 |
Chris Cannam |
Remove duplicate action
|
Tue, 17 Jul 2018 13:57:33 +0100 |
Chris Cannam |
A crack at fixing #1842, SV source package doesn't build on macOS
|
Fri, 13 Jul 2018 16:25:48 +0100 |
Chris Cannam |
Looks like AppVeyor have updated their image too
|
Fri, 13 Jul 2018 16:01:12 +0100 |
Chris Cannam |
Looks like Travis image has been updated to reject our build without this
|
Thu, 12 Jul 2018 18:54:19 +0100 |
Chris Cannam |
Added tag sv_v3.1 for changeset f4d7c9522fcf
|
Thu, 12 Jul 2018 18:54:12 +0100 |
Chris Cannam |
Update version for 3.1
sv_v3.1
|
Thu, 12 Jul 2018 15:05:50 +0100 |
Chris Cannam |
Remove auto-push from here
|
Wed, 04 Jul 2018 16:07:57 +0100 |
Chris Cannam |
Added tag sv_v3.1pre4 for changeset b465eb7018bc
|
Wed, 04 Jul 2018 16:07:45 +0100 |
Chris Cannam |
Win32 fix
sv_v3.1pre4
|
Wed, 04 Jul 2018 15:37:26 +0100 |
Chris Cannam |
Added tag sv_v3.1pre4 for changeset 2ea9537868d5
|
Wed, 04 Jul 2018 15:37:11 +0100 |
Chris Cannam |
Version and changelog
|
Wed, 04 Jul 2018 15:34:38 +0100 |
Chris Cannam |
Ensure scale appears in AutoAlign layers, + colour fix
|
Tue, 03 Jul 2018 16:12:19 +0100 |
Chris Cannam |
Ignore a couple more things
|
Tue, 03 Jul 2018 16:09:16 +0100 |
Chris Cannam |
Fix typo
|
Tue, 03 Jul 2018 15:51:58 +0100 |
Chris Cannam |
Try adding JACK to the mix
|
Tue, 03 Jul 2018 15:36:27 +0100 |
Chris Cannam |
Use openLocalFolder for this; + update subdir to wait for xdg-open completion (as it used to do with previous process call)
|
Tue, 03 Jul 2018 15:06:53 +0100 |
Chris Cannam |
Further attempt at path fix
|
Tue, 03 Jul 2018 14:42:52 +0100 |
Chris Cannam |
Attempt to avoid passing on library path to system executables
|
Tue, 03 Jul 2018 14:28:15 +0100 |
Chris Cannam |
Tweak
|
Tue, 03 Jul 2018 14:16:16 +0100 |
Chris Cannam |
Tweak
|
Tue, 03 Jul 2018 14:15:51 +0100 |
Chris Cannam |
Name things explicitly rather than relying on the other build script
|
Tue, 03 Jul 2018 14:13:27 +0100 |
Chris Cannam |
Attempt to thread the appimage build/test together
|
Tue, 03 Jul 2018 14:12:26 +0100 |
Chris Cannam |
Tidy
|
Tue, 03 Jul 2018 12:51:10 +0100 |
Chris Cannam |
Without portaudio, we need this
|
Tue, 03 Jul 2018 11:47:12 +0100 |
Chris Cannam |
Avoid portaudio
|
Tue, 03 Jul 2018 11:47:06 +0100 |
Chris Cannam |
Plugin subdirs
|
Tue, 03 Jul 2018 10:45:28 +0100 |
Chris Cannam |
Looks like this config option is what we need
|
Tue, 03 Jul 2018 09:42:24 +0100 |
Chris Cannam |
Attempt to fix failure to install helpers (again). Perhaps the fact that this path did not correspond exactly to a build target is the problem.
|
Sun, 01 Jul 2018 16:11:45 +0100 |
Chris Cannam |
Try switching to DynamicJACK for more portable application builds
|
Sun, 01 Jul 2018 14:22:05 +0100 |
Chris Cannam |
Master
|
Sun, 01 Jul 2018 10:15:49 +0100 |
Chris Cannam |
Slightly different tack
|
Fri, 29 Jun 2018 20:49:37 +0100 |
Chris Cannam |
Added tag sv_v3.1pre3 for changeset a38a8c4746c2
|
Fri, 29 Jun 2018 20:29:24 +0100 |
Chris Cannam |
Pre3
sv_v3.1pre3
|
Fri, 29 Jun 2018 14:10:08 +0100 |
Chris Cannam |
Experimental relabelling
import-audio-data
|
Fri, 29 Jun 2018 13:57:29 +0100 |
Chris Cannam |
Use progress dialog when importing audio data
import-audio-data
|
Fri, 29 Jun 2018 10:53:35 +0100 |
Chris Cannam |
Add docker file for appimage build
|
Fri, 29 Jun 2018 10:31:17 +0100 |
Chris Cannam |
Toward getting appimage build working in Docker
|
Fri, 29 Jun 2018 09:34:42 +0100 |
Chris Cannam |
Use QTDIR as well
|
Thu, 28 Jun 2018 21:24:42 +0100 |
Chris Cannam |
Merge from branch appimage
|
Thu, 28 Jun 2018 20:39:01 +0100 |
Chris Cannam |
Might as well publish
appimage
|
Thu, 28 Jun 2018 18:42:45 +0100 |
Chris Cannam |
Qt plugins
appimage
|
Thu, 28 Jun 2018 15:45:13 +0100 |
Chris Cannam |
Call writeComplete, & wire up in svapp
import-audio-data
|
Thu, 28 Jun 2018 15:31:32 +0100 |
Chris Cannam |
Attempt to follow exclusion list and name package from revision
appimage
|
Thu, 28 Jun 2018 14:53:38 +0100 |
Chris Cannam |
Toward loading audio from CSV files
import-audio-data
|
Thu, 28 Jun 2018 13:11:46 +0100 |
Chris Cannam |
Looks like /usr/local/lib is not in the default load path
appimage
|
Thu, 28 Jun 2018 12:53:05 +0100 |
Chris Cannam |
Update translations
|
Thu, 28 Jun 2018 12:52:04 +0100 |
Chris Cannam |
Description
appimage
|
Thu, 28 Jun 2018 11:48:12 +0100 |
Chris Cannam |
Further appdir layout fixes
appimage
|
Thu, 28 Jun 2018 11:44:50 +0100 |
Chris Cannam |
Try override
appimage
|
Thu, 28 Jun 2018 10:53:03 +0100 |
Chris Cannam |
Put style DLLs in the right directory!
|
Thu, 28 Jun 2018 10:41:26 +0100 |
Chris Cannam |
Subrepo update
appimage
|
Wed, 27 Jun 2018 21:50:33 +0100 |
Chris Cannam |
Added tag sv_v3.1pre2 for changeset 1fda47827e0e
|
Wed, 27 Jun 2018 21:50:23 +0100 |
Chris Cannam |
Doh! version
sv_v3.1pre2
|
Wed, 27 Jun 2018 21:39:19 +0100 |
Chris Cannam |
Added tag sv_v3.1pre2 for changeset 643768964863
|
Wed, 27 Jun 2018 21:39:04 +0100 |
Chris Cannam |
Add style plugin
|
Wed, 27 Jun 2018 21:08:26 +0100 |
Chris Cannam |
Attempt to handle libraries in /lib. I have a bad feeling about this
appimage
|
Wed, 27 Jun 2018 16:23:16 +0100 |
Chris Cannam |
Debug output
appimage
|
Wed, 27 Jun 2018 15:57:08 +0100 |
Chris Cannam |
Recursive dependencies
appimage
|
Wed, 27 Jun 2018 14:17:01 +0100 |
Chris Cannam |
Still troublesome. Try this
appimage
|
Wed, 27 Jun 2018 13:51:33 +0100 |
Chris Cannam |
Ah, I see. Well, presumably this still saves writing the name twice
appimage
|
Wed, 27 Jun 2018 13:28:58 +0100 |
Chris Cannam |
Upload path
appimage
|
Wed, 27 Jun 2018 12:59:18 +0100 |
Chris Cannam |
Experimental bintray thingy
appimage
|
Tue, 26 Jun 2018 18:02:21 +0100 |
Chris Cannam |
Experimental AppImage package
appimage
|
Tue, 26 Jun 2018 14:38:23 +0100 |
Chris Cannam |
Property box pushbutton fix for Mac
|
Tue, 26 Jun 2018 13:29:40 +0100 |
Chris Cannam |
Add qmacstyle plugin
|
Tue, 26 Jun 2018 09:45:05 +0100 |
Chris Cannam |
Added tag sv_v3.1pre1 for changeset 038f024c8390
|
Tue, 26 Jun 2018 09:42:01 +0100 |
Chris Cannam |
pre1, not beta1
sv_v3.1pre1
|
Tue, 26 Jun 2018 08:36:16 +0100 |
Chris Cannam |
Level-pan rendering fix
|
Mon, 25 Jun 2018 15:31:05 +0100 |
Chris Cannam |
Improved level-pan widget rendering
|
Fri, 22 Jun 2018 17:51:57 +0100 |
Chris Cannam |
Experiment with rounded rects
|
Fri, 22 Jun 2018 17:20:18 +0100 |
Chris Cannam |
Better handling for mouse wheel events in widgets
|
Thu, 21 Jun 2018 15:38:12 +0100 |
Chris Cannam |
Update subrepos, including half-steps in level-pan widget
|
Wed, 20 Jun 2018 11:16:35 +0100 |
Chris Cannam |
Remove duplicate include
|
Wed, 20 Jun 2018 11:04:12 +0100 |
Chris Cannam |
Next actual release will be 3.1-beta1
|
Wed, 20 Jun 2018 11:04:05 +0100 |
Chris Cannam |
Update CHANGELOG
|
Wed, 20 Jun 2018 10:43:18 +0100 |
Chris Cannam |
Add a scary warning for incomplete session load
|
Tue, 19 Jun 2018 15:23:24 +0100 |
Chris Cannam |
Fix typo
|
Tue, 19 Jun 2018 15:20:56 +0100 |
Chris Cannam |
First cut at updating archive scripts to use Repoint
|
Tue, 19 Jun 2018 15:20:42 +0100 |
Chris Cannam |
Include this only if it exists - then we can omit it from archives (i.e. source releases) where it isn't relevant
|
Tue, 19 Jun 2018 15:03:24 +0100 |
Chris Cannam |
Experimentally add a rule to re-run Repoint if the project or lock file is newer than the .repoint.point file. This sort of thing isn't sufficient for all uses of Repoint because some of the initial qmake project file info is brought in by Repoint, so it has to be run before qmake as well. Also it's not clear yet how it will interact with archived builds (i.e. source releases) -- to be tested.
|
Tue, 19 Jun 2018 14:58:06 +0100 |
Chris Cannam |
Update Repoint
|
Mon, 18 Jun 2018 14:17:26 +0100 |
Chris Cannam |
Avoid setting the session file path when loading an incomplete document, so that the default-file save-on-exit and File->Save are not activated (to avoid losing references to unfound audio files)
|
Tue, 12 Jun 2018 11:20:11 +0100 |
Chris Cannam |
Update with Qt test fix
|
Mon, 11 Jun 2018 17:48:34 +0100 |
Chris Cannam |
Update checker subrepo too
|
Mon, 11 Jun 2018 14:42:56 +0100 |
Chris Cannam |
Merge from branch plugin-path-config
|
Mon, 11 Jun 2018 14:41:32 +0100 |
Chris Cannam |
Merge subrepos back to default
plugin-path-config
|
Mon, 11 Jun 2018 13:42:45 +0100 |
Chris Cannam |
Build fix
plugin-path-config
|
Mon, 11 Jun 2018 11:38:27 +0100 |
Chris Cannam |
Fix compiler warning
plugin-path-config
|
Mon, 11 Jun 2018 11:34:36 +0100 |
Chris Cannam |
Fixes to plugin path handling
plugin-path-config
|
Fri, 08 Jun 2018 15:14:25 +0100 |
Chris Cannam |
Minor layout fix
plugin-path-config
|
Fri, 08 Jun 2018 14:34:29 +0100 |
Chris Cannam |
Use KnownPlugins for plugin path settings stuff
plugin-path-config
|
Fri, 08 Jun 2018 11:54:17 +0100 |
Chris Cannam |
Use wide-char environment variable stuff
plugin-path-config
|
Thu, 07 Jun 2018 16:49:47 +0100 |
Chris Cannam |
Environment updates
plugin-path-config
|
Thu, 07 Jun 2018 16:26:38 +0100 |
Chris Cannam |
System library test program (beginnings of)
plugin-path-config
|
Thu, 07 Jun 2018 15:35:37 +0100 |
Chris Cannam |
Add provisional utf-8 getenv/putenv implementations
plugin-path-config
|
Thu, 07 Jun 2018 14:56:59 +0100 |
Chris Cannam |
Merge from default branch
plugin-path-config
|
Thu, 07 Jun 2018 14:56:37 +0100 |
Chris Cannam |
Update VC redist version
|
Thu, 07 Jun 2018 14:16:16 +0100 |
Chris Cannam |
Merge from default branch
plugin-path-config
|
Thu, 07 Jun 2018 13:18:04 +0100 |
Chris Cannam |
OK, does this work with mingw32-make? Very annoyed by these little quoting-related differences in qmake output between AppVeyor's VM and localhost
|
Thu, 07 Jun 2018 11:12:07 +0100 |
Chris Cannam |
Explicit mkspecs
|
Thu, 07 Jun 2018 11:36:53 +0100 |
Chris Cannam |
Merge from default branch
plugin-path-config
|
Thu, 07 Jun 2018 11:12:07 +0100 |
Chris Cannam |
Explicit mkspecs
plugin-path-config
|
Wed, 06 Jun 2018 15:56:09 +0100 |
Chris Cannam |
Checker API update
plugin-path-config
|
Wed, 06 Jun 2018 13:53:10 +0100 |
Chris Cannam |
Branch in subrepo
plugin-path-config
|
Tue, 05 Jun 2018 16:24:08 +0100 |
Chris Cannam |
Update for Qt 5.11; some more error-handling, + ensure clean build in rebuild script
|
Tue, 05 Jun 2018 14:20:45 +0100 |
Chris Cannam |
Merge from default branch
plugin-path-config
|
Tue, 05 Jun 2018 13:32:28 +0100 |
Chris Cannam |
Further tidying, and error handling, for Windows build scripting
|
Mon, 04 Jun 2018 15:45:32 +0100 |
Chris Cannam |
Environment variable support in plugin paths
plugin-path-config
|
Fri, 25 May 2018 16:09:40 +0100 |
Chris Cannam |
Wire up plugin path settings logic (needs more testing)
plugin-path-config
|
Fri, 25 May 2018 13:39:28 +0100 |
Chris Cannam |
Plugin review dialog
plugin-path-config
|
Fri, 25 May 2018 10:17:39 +0100 |
Chris Cannam |
Since the rapid applicationClosing(true) was introduced on the following line, this has no longer been necessary -- and it produces a crash itself, as closeSession deletes the preferences dialog itself
plugin-path-config
|
Fri, 25 May 2018 09:45:36 +0100 |
Chris Cannam |
Subrepo update
plugin-path-config
|
Fri, 25 May 2018 09:25:38 +0100 |
Chris Cannam |
Merge from default branch
plugin-path-config
|
Thu, 24 May 2018 17:30:02 +0100 |
Chris Cannam |
Merge from branch baselib-win-build
|
Thu, 24 May 2018 17:29:36 +0100 |
Chris Cannam |
Linux build fix
baselib-win-build
|
Thu, 24 May 2018 17:20:03 +0100 |
Chris Cannam |
OSX build fix
baselib-win-build
|
Thu, 24 May 2018 16:44:35 +0100 |
Chris Cannam |
Merge
baselib-win-build
|
Thu, 24 May 2018 16:44:07 +0100 |
Chris Cannam |
qmacstyle no longer needed?
|
Thu, 24 May 2018 16:19:50 +0100 |
Chris Cannam |
Alternative build mechanism for Windows, with base as a library and a single script to run full builds
baselib-win-build
|
Wed, 23 May 2018 16:25:15 +0100 |
Chris Cannam |
Add "Add"
plugin-path-config
|
Wed, 23 May 2018 11:52:40 +0100 |
Chris Cannam |
More work on plugin path config
plugin-path-config
|
Mon, 21 May 2018 16:16:31 +0100 |
Chris Cannam |
Toward more than one plugin type in this widget
plugin-path-config
|
Fri, 18 May 2018 13:49:23 +0100 |
Chris Cannam |
Update Repoint to v1.0
|
Fri, 18 May 2018 13:49:16 +0100 |
Chris Cannam |
CI update for newer system
|
Thu, 17 May 2018 14:38:11 +0100 |
Chris Cannam |
Update to remove some debug (again)
|
Thu, 17 May 2018 12:07:44 +0100 |
Chris Cannam |
Update with likely fix
|
Thu, 17 May 2018 11:33:58 +0100 |
Chris Cannam |
Commit some extra debug, trying to narrow down Travis failure case
|
Wed, 16 May 2018 15:48:58 +0100 |
Chris Cannam |
Subrepo update for test; add some apt packages that are needed on vanilla ubuntu even though travis does have them already (as a handy reference)
|
Tue, 15 May 2018 15:26:42 +0100 |
Chris Cannam |
Merge from branch repoint
|
Tue, 15 May 2018 15:25:32 +0100 |
Chris Cannam |
Subrepo update for path adjustment buttons
plugin-path-config
|
Tue, 15 May 2018 13:30:09 +0100 |
Chris Cannam |
Subrepo update
|
Tue, 15 May 2018 11:18:51 +0100 |
Chris Cannam |
Update subrepos: fix warnings, semi-implement up/down in plugin path configurator
plugin-path-config
|
Fri, 11 May 2018 17:04:33 +0100 |
Chris Cannam |
Update branch
plugin-path-config
|
Fri, 11 May 2018 17:02:53 +0100 |
Chris Cannam |
Toward allowing the user to see (at least, and maybe change) the plugin path
plugin-path-config
|
Fri, 11 May 2018 16:59:57 +0100 |
Chris Cannam |
Up & down
repoint
|
Thu, 10 May 2018 10:13:02 +0100 |
Chris Cannam |
Tidy up rounding + tests
|
Thu, 10 May 2018 10:12:48 +0100 |
Chris Cannam |
Tidy up rounding + tests
repoint
|
Wed, 09 May 2018 13:28:55 +0100 |
Chris Cannam |
Vext -> Repoint. Let's see how this goes.
repoint
|
Tue, 08 May 2018 14:28:58 +0100 |
Chris Cannam |
Fix for scale line positioning on OSX
|
Fri, 04 May 2018 14:08:34 +0100 |
Chris Cannam |
Update subrepo for 32-bit fix
|
Thu, 03 May 2018 15:25:14 +0100 |
Chris Cannam |
Reset to default branch
|
Thu, 03 May 2018 15:24:43 +0100 |
Chris Cannam |
Merge from branch horizontal-scale
|
Thu, 03 May 2018 15:15:53 +0100 |
Chris Cannam |
Horizontal scale and colour-scale fixes for spectrum
horizontal-scale
|
Wed, 02 May 2018 15:44:21 +0100 |
Chris Cannam |
Better log scale tick calculations
horizontal-scale
|
Wed, 02 May 2018 14:34:07 +0100 |
Chris Cannam |
Fix project file for this branch
horizontal-scale
|
Wed, 02 May 2018 14:33:41 +0100 |
Chris Cannam |
Merge from default branch
horizontal-scale
|
Wed, 02 May 2018 14:32:01 +0100 |
Chris Cannam |
Fix accidental removal of empty-pane/layer addition shortcuts
|
Wed, 02 May 2018 14:31:42 +0100 |
Chris Cannam |
Add new icon
|
Wed, 02 May 2018 14:28:44 +0100 |
Chris Cannam |
Fixes to horizontal scale bits
horizontal-scale
|
Tue, 01 May 2018 16:32:55 +0100 |
Chris Cannam |
Draw some ticks
horizontal-scale
|
Tue, 01 May 2018 16:14:38 +0100 |
Chris Cannam |
Branch towards adding horizontal numerical scales to things
horizontal-scale
|
Thu, 26 Apr 2018 15:09:52 +0100 |
Chris Cannam |
Update pane and layer menu shortcuts so that the waveform/spectrogram/etc shortcuts (Shift+G etc) always refer to the source model that is in the currently selected pane. This is a potentially confusing backward-incompatible change, but is also quite clearly how it ought to work...
|
Thu, 26 Apr 2018 09:27:24 +0100 |
Chris Cannam |
Scale scalable icon
|
Thu, 26 Apr 2018 09:25:13 +0100 |
Chris Cannam |
Use scalable info icon
|
Tue, 24 Apr 2018 15:04:07 +0100 |
Chris Cannam |
Remove translations of "Space"-meaning-the-spacebar-shortcut, and update
|
Tue, 24 Apr 2018 15:03:45 +0100 |
Chris Cannam |
Note to translators not to translate "Space"
|
Tue, 24 Apr 2018 14:14:58 +0100 |
Chris Cannam |
Minor build tweak
|
Tue, 24 Apr 2018 10:16:16 +0100 |
Chris Cannam |
Subrepo fixes
|
Mon, 23 Apr 2018 13:29:31 +0100 |
Chris Cannam |
Update bqfft
|
Fri, 20 Apr 2018 16:35:48 +0100 |
Chris Cannam |
Deployment updates for win32/win64. Next version will be 3.1.
|
Thu, 19 Apr 2018 14:41:42 +0100 |
Chris Cannam |
Make selection extents more visible, & make end-of-audio overlays translucent
|
Thu, 19 Apr 2018 13:18:02 +0100 |
Chris Cannam |
Make "Select All" select the whole span of everything that exists, not just the main model (toward SF bug #243 Copied Time Instant Layer does not include instant at end of track)
|
Wed, 18 Apr 2018 15:19:59 +0100 |
Chris Cannam |
Update subrepo for fix to SF bug #241 Imported Annotation midi layer does not play
|
Wed, 18 Apr 2018 13:35:32 +0100 |
Chris Cannam |
Make the ";"-key versions of these shortcuts the primary ones advertised on the menus (since so few people have an Enter key these days). For SF bug #246 Some shortcuts do not work
|
Tue, 17 Apr 2018 11:27:31 +0100 |
Chris Cannam |
Merge from branch streaming-csv-writer
|
Tue, 17 Apr 2018 10:58:44 +0100 |
Chris Cannam |
Update to include Lucas's streaming CSV export code via hg rather than git
streaming-csv-writer
|
Mon, 16 Apr 2018 15:23:01 +0100 |
Chris Cannam |
Add Lucas's progress dialog change for CSV export
streaming-csv-writer
|
Fri, 13 Apr 2018 17:19:21 +0100 |
Chris Cannam |
Update subrepo
streaming-csv-writer
|
Fri, 13 Apr 2018 15:44:13 +0100 |
Chris Cannam |
Branch for work on streaming CSV stuff started by Lucas
streaming-csv-writer
|
Wed, 21 Mar 2018 11:18:32 +0000 |
Chris Cannam |
Update Vext
|
Fri, 09 Mar 2018 11:10:39 +0000 |
Chris Cannam |
Update bqvec
|
Fri, 09 Mar 2018 09:09:48 +0000 |
Chris Cannam |
Update subrepos
|
Fri, 09 Mar 2018 09:00:54 +0000 |
Chris Cannam |
Merge
|
Fri, 09 Mar 2018 09:00:48 +0000 |
Chris Cannam |
Update Vext
|
Mon, 26 Feb 2018 14:30:37 +0000 |
Chris Cannam |
Add a note about the doc link
|
Thu, 01 Mar 2018 18:02:33 +0000 |
Chris Cannam |
Untabify
|
Thu, 01 Mar 2018 14:44:21 +0000 |
Chris Cannam |
Convert some cerrs to SVCERRs. Apart from anything else, this makes MSVC2017 happy
|
Fri, 16 Feb 2018 08:27:04 +0000 |
Chris Cannam |
Fix for VC2017, plus add the generated files to the clean target
|
Fri, 09 Feb 2018 12:25:16 +0000 |
Chris Cannam |
Update subrepos
|
Fri, 02 Feb 2018 11:40:24 +0000 |
Chris Cannam |
Update Vext
|
Fri, 02 Feb 2018 11:40:02 +0000 |
Chris Cannam |
Update a couple of libraries
|
Wed, 31 Jan 2018 11:50:33 +0000 |
Chris Cannam |
Fixes for Qt 5.10
|
Wed, 31 Jan 2018 11:36:29 +0000 |
Chris Cannam |
Bump the version
|
Thu, 25 Jan 2018 10:46:18 +0000 |
Chris Cannam |
Specific path for win32 g++ build
|
Tue, 23 Jan 2018 12:54:58 +0000 |
Chris Cannam |
Update Vext
|
Tue, 12 Dec 2017 11:24:41 +0000 |
Chris Cannam |
Merge
|
Tue, 12 Dec 2017 11:23:45 +0000 |
Chris Cannam |
Update subrepo for fallthrough fix
|
Mon, 11 Dec 2017 13:23:37 +0000 |
Chris Cannam |
Update Vext
|
Mon, 11 Dec 2017 13:23:33 +0000 |
Chris Cannam |
Update for a couple of fixes prompted by undefined-behaviour sanitiser
|
Mon, 11 Dec 2017 08:13:32 +0000 |
Chris Cannam |
Update Vext
|
Thu, 07 Dec 2017 13:52:53 +0000 |
Chris Cannam |
Fix misnamed target, which caused a lot of stuff to be rebuilt on what should have been empty remakes
|
Thu, 07 Dec 2017 13:34:23 +0000 |
Chris Cannam |
Use undefined behaviour sanitiser in debug mode
|
Tue, 05 Dec 2017 14:29:23 +0000 |
Chris Cannam |
Pick up prefix from configure for install target
|
Thu, 09 Nov 2017 15:59:18 +0000 |
Chris Cannam |
Update Vext and subrepos
|
Tue, 10 Oct 2017 11:18:47 +0100 |
Chris Cannam |
Nope, macOS CI build is still broken ("Homebrew must be run under Ruby 2.3"). Another random attempt at a fix
|
Tue, 10 Oct 2017 09:15:27 +0100 |
Chris Cannam |
Well, whatever that last change did, it didn't work. Try this
|
Mon, 09 Oct 2017 13:05:21 +0100 |
Chris Cannam |
Current Travis image is now failing to run Homebrew - let's try a newer one
|
Mon, 09 Oct 2017 11:19:26 +0100 |
Chris Cannam |
Update libraries to fix a couple of small issues
|
Mon, 09 Oct 2017 11:09:34 +0100 |
Chris Cannam |
Update vext
|
Fri, 06 Oct 2017 13:28:35 +0100 |
Chris Cannam |
Update vext
|
Wed, 04 Oct 2017 21:03:24 +0100 |
Chris Cannam |
Strangely the three files seem to be installed if we have them in this order, but not the other order. Must be missing something here.
|
Fri, 08 Sep 2017 15:39:38 +0100 |
Chris Cannam |
Notes on Windows Desktop App Converter stuff
|
Fri, 01 Sep 2017 10:46:37 +0100 |
Chris Cannam |
Comment
|
Thu, 31 Aug 2017 18:50:56 +0100 |
Chris Cannam |
Update svcore
|
Thu, 20 Jul 2017 15:01:42 +0100 |
Chris Cannam |
Update subrepos, add to ignore list
|
Thu, 13 Jul 2017 15:34:33 +0100 |
Chris Cannam |
Update vext
|
Thu, 13 Jul 2017 15:33:43 +0100 |
Chris Cannam |
Update subrepos
|
Tue, 11 Jul 2017 09:07:15 +0100 |
Chris Cannam |
Update README
|
Mon, 10 Jul 2017 20:48:47 +0100 |
Chris Cannam |
Tidy
|
Mon, 10 Jul 2017 18:55:21 +0100 |
Chris Cannam |
Update for README.md
|
Mon, 10 Jul 2017 17:34:06 +0100 |
Chris Cannam |
Markdownise, add badges
|
Mon, 10 Jul 2017 14:39:27 +0100 |
Chris Cannam |
Update libraries
|
Mon, 10 Jul 2017 14:04:44 +0100 |
Chris Cannam |
Merge from branch "vext"
|
Mon, 10 Jul 2017 13:46:20 +0100 |
Chris Cannam |
Update Vext and lock file
vext
|
Mon, 10 Jul 2017 12:55:47 +0100 |
Chris Cannam |
Pull out capnp-regen, update CI configs
vext
|
Mon, 10 Jul 2017 11:54:33 +0100 |
Chris Cannam |
Some build and CI fixes
vext
|
Mon, 10 Jul 2017 10:10:19 +0100 |
Chris Cannam |
Merge
vext
|
Mon, 10 Jul 2017 10:09:29 +0100 |
Chris Cannam |
Fix paths for shadow build
vext
|
Fri, 07 Jul 2017 21:36:07 +0100 |
Chris Cannam |
Add some build files
vext
|
Fri, 07 Jul 2017 21:29:55 +0100 |
Chris Cannam |
Try capnp rebuild on Windows (badly)
vext
|
Wed, 05 Jul 2017 10:37:26 +0100 |
Chris Cannam |
Rebuild capnp-generated files using sv-dependency-builds version of capnp tools on OSX. This would be better refactored into config and noconfig alternatives.
vext
|
Thu, 29 Jun 2017 14:16:19 +0100 |
Chris Cannam |
Update vext
vext
|
Thu, 29 Jun 2017 11:23:15 +0100 |
Chris Cannam |
Update Vext
vext
|
Wed, 28 Jun 2017 13:23:17 +0100 |
Chris Cannam |
Update libraries
vext
|
Wed, 28 Jun 2017 13:20:05 +0100 |
Chris Cannam |
Update vext; providers -> services
vext
|
Tue, 27 Jun 2017 14:31:29 +0100 |
Chris Cannam |
An effort at having capnp header/source regenerated (since different versions of capnp are not compatible in this respect)
vext
|
Tue, 27 Jun 2017 11:30:50 +0100 |
Chris Cannam |
Merge from branch output-type-uri
vext
|
Mon, 26 Jun 2017 11:54:23 +0100 |
Chris Cannam |
Update vext
output-type-uri
|
Tue, 20 Jun 2017 11:46:04 +0100 |
Chris Cannam |
Merge from branch vext
output-type-uri
|
Tue, 20 Jun 2017 11:44:32 +0100 |
Chris Cannam |
Update vext
vext
|
Mon, 19 Jun 2017 10:14:58 +0100 |
Chris Cannam |
Subrepo update
output-type-uri
|
Fri, 16 Jun 2017 14:09:57 +0100 |
Chris Cannam |
Update timestamps
|
Thu, 08 Jun 2017 17:04:19 +0100 |
Chris Cannam |
Use output-type-uri piper branch
output-type-uri
|
Thu, 08 Jun 2017 16:49:35 +0100 |
Chris Cannam |
Merge from default branch
vext
|
Wed, 07 Jun 2017 12:52:11 +0100 |
Chris Cannam |
Update hgignore for directories managed by vext
vext
|
Wed, 07 Jun 2017 11:42:31 +0100 |
Chris Cannam |
Switch vamp-plugin-sdk back to hg
vext
|
Wed, 07 Jun 2017 10:05:47 +0100 |
Chris Cannam |
Update Vext logic
vext
|
Wed, 07 Jun 2017 09:56:57 +0100 |
Chris Cannam |
Update Vext
vext
|
Wed, 07 Jun 2017 09:54:57 +0100 |
Chris Cannam |
Use vext only if we are in a Mercurial checkout
vext
|
Wed, 07 Jun 2017 09:00:47 +0100 |
Chris Cannam |
Make configure use vext
vext
|
Fri, 26 May 2017 14:02:34 +0100 |
Chris Cannam |
Merge from default branch
vext
|
Thu, 25 May 2017 15:43:32 +0100 |
Chris Cannam |
msi versions
|
Thu, 25 May 2017 15:01:14 +0100 |
Chris Cannam |
Added tag sv_v3.0.3 for changeset 8d2d9a4f5d52
|
Thu, 25 May 2017 09:26:10 +0100 |
Chris Cannam |
Update CHANGELOG
sv_v3.0.3
|
Thu, 25 May 2017 09:24:01 +0100 |
Chris Cannam |
Change of plan; this will be 3.0.3. I'm not going to make any more substantial fixes, so it's not a big enough change for 3.1, but I don't want to hold off the release for long. And hey, it's 303
|
Wed, 24 May 2017 10:11:27 +0100 |
Chris Cannam |
Update install instructions, add Dockerfile for v3.1 (when released)
|
Wed, 24 May 2017 09:22:55 +0100 |
Chris Cannam |
This will be 3.1
|
Tue, 23 May 2017 12:38:29 +0100 |
Chris Cannam |
Update Win32 capnp build in subrepo
|
Mon, 22 May 2017 19:01:34 +0100 |
Chris Cannam |
Update Win64 capnp build in subrepo
|
Mon, 22 May 2017 10:01:52 +0100 |
Chris Cannam |
Update subrepos for capnp 0.6
|
Tue, 09 May 2017 14:59:21 +0100 |
Chris Cannam |
Update for capnp 0.6
|
Tue, 09 May 2017 10:25:45 +0100 |
Chris Cannam |
Fix repository key
vext
|
Fri, 05 May 2017 08:19:10 +0100 |
Chris Cannam |
Merge from branch scale-ticks
|
Thu, 04 May 2017 19:20:24 +0100 |
Chris Cannam |
SVDEBUG, though it turns out not to be very useful
scale-ticks
|
Thu, 04 May 2017 15:42:40 +0100 |
Chris Cannam |
Make use of ScaleTickIntervals in log scale as well
scale-ticks
|
Thu, 04 May 2017 15:37:43 +0100 |
Chris Cannam |
Rework log scale calculation, update to changed interface
scale-ticks
|
Thu, 04 May 2017 13:32:42 +0100 |
Chris Cannam |
We don't need to return the tick instruction gubbins
scale-ticks
|
Thu, 04 May 2017 13:19:57 +0100 |
Chris Cannam |
Another test, that needs some more work
scale-ticks
|
Thu, 04 May 2017 10:46:38 +0100 |
Chris Cannam |
After seeing them in action, I changed my mind about the wisdom of these trailing .0s
scale-ticks
|
Thu, 04 May 2017 10:24:23 +0100 |
Chris Cannam |
Make use of ScaleTickIntervals in linear numerical scale (not log yet)
scale-ticks
|
Thu, 04 May 2017 10:14:56 +0100 |
Chris Cannam |
Add logarithmic ticks. This is getting complicated!
scale-ticks
|
Thu, 04 May 2017 08:53:00 +0100 |
Chris Cannam |
Tests now passing
scale-ticks
|
Thu, 04 May 2017 08:32:41 +0100 |
Chris Cannam |
Change loop to something that feels more correct, though it makes no difference to the tests here. More tests, one failing.
scale-ticks
|
Wed, 03 May 2017 18:26:26 +0100 |
Chris Cannam |
More tests & fixes
scale-ticks
|
Wed, 03 May 2017 18:06:48 +0100 |
Chris Cannam |
These tests now pass (in some cases by fixing the tests)
scale-ticks
|
Wed, 03 May 2017 18:01:25 +0100 |
Chris Cannam |
More fixes, more tests, including some more that now fail
scale-ticks
|
Wed, 03 May 2017 17:02:01 +0100 |
Chris Cannam |
These tests now pass, but there's still a lot to be done
scale-ticks
|
Wed, 03 May 2017 13:02:36 +0100 |
Chris Cannam |
Add forgotten field
vext
|
Wed, 03 May 2017 13:02:08 +0100 |
Chris Cannam |
Scale tick labeller, and tests (some failing so far)
scale-ticks
|
Tue, 25 Apr 2017 15:40:15 +0100 |
Chris Cannam |
Factor out provider
vext
|
Mon, 24 Apr 2017 16:12:54 +0100 |
Chris Cannam |
Flatten spec file hierarchy
vext
|
Mon, 24 Apr 2017 15:43:25 +0100 |
Chris Cannam |
Test spec
vext
|
Mon, 24 Apr 2017 09:07:26 +0100 |
Chris Cannam |
Untabify
|
Mon, 10 Apr 2017 09:47:09 +0100 |
Chris Cannam |
Some README updates
|
Mon, 10 Apr 2017 09:42:16 +0100 |
Chris Cannam |
Update INSTALL instructions
|
Sun, 12 Mar 2017 13:46:31 +0000 |
Chris Cannam |
Added tag sv_v3.0.2 for changeset 38c40fe5135b
|
Sun, 12 Mar 2017 13:37:15 +0000 |
Chris Cannam |
Next release will be 3.0.2
sv_v3.0.2
|
Sun, 12 Mar 2017 13:31:25 +0000 |
Chris Cannam |
Update Czech translation, thanks Pavel
|
Wed, 08 Mar 2017 08:37:55 +0000 |
Chris Cannam |
Credit translators in About box
|
Wed, 08 Mar 2017 08:30:09 +0000 |
Chris Cannam |
Credit translators in README
|
Wed, 08 Mar 2017 08:15:27 +0000 |
Chris Cannam |
Update Russian translation, thanks Alexandre
|
Tue, 07 Mar 2017 18:54:15 +0000 |
Chris Cannam |
Make some corrections to crosshair (measure cursor) positioning and feature descriptions. Needs review.
|
Tue, 07 Mar 2017 18:39:37 +0000 |
Chris Cannam |
Fix crash when changing window size in the spectrum layer
|
Tue, 07 Mar 2017 14:01:01 +0000 |
Chris Cannam |
Added tag sv_v3.0.1 for changeset fad5960ac61a
|
Tue, 07 Mar 2017 13:53:14 +0000 |
Chris Cannam |
Formatting
sv_v3.0.1
|
Tue, 07 Mar 2017 13:52:42 +0000 |
Chris Cannam |
Added tag sv_v3.0.1 for changeset 96a5cf264033
|
Tue, 07 Mar 2017 13:52:37 +0000 |
Chris Cannam |
Untabify!
|
Tue, 07 Mar 2017 13:52:30 +0000 |
Chris Cannam |
Update changelog
|
Tue, 07 Mar 2017 13:42:33 +0000 |
Chris Cannam |
Added tag sv_v3.0.1 for changeset cbaac283f47e
|
Tue, 07 Mar 2017 13:33:51 +0000 |
Chris Cannam |
Add Docker build file for 3.0.1, remove the old betas
|
Tue, 07 Mar 2017 13:27:53 +0000 |
Chris Cannam |
Change where the 32-bit memory calculation adjustment is carried out -- more transparent here
|
Tue, 07 Mar 2017 11:49:19 +0000 |
Chris Cannam |
Ensure 32-bit Windows build uses _aligned_malloc as well as 64-bit one; more debug out
|
Mon, 06 Mar 2017 17:37:23 +0000 |
Chris Cannam |
Fix some one-off memory leaks (including distracting ones in tests)
|
Mon, 06 Mar 2017 17:23:46 +0000 |
Chris Cannam |
Some bits and bobs to do with handling memory pressure
|
Mon, 06 Mar 2017 14:31:25 +0000 |
Chris Cannam |
Hoping this will make for 3.0.1
|
Mon, 06 Mar 2017 13:29:58 +0000 |
Chris Cannam |
Remove "other" Vamp SDK repo from sv-dependency-builds
|
Mon, 06 Mar 2017 13:29:21 +0000 |
Chris Cannam |
Update to Vamp plugin SDK v2.7.1 tag
|
Mon, 06 Mar 2017 10:13:05 +0000 |
Chris Cannam |
Handle versions without hyphen separator here
|
Mon, 06 Mar 2017 10:12:35 +0000 |
Chris Cannam |
Add -O3
|
Mon, 06 Mar 2017 10:12:23 +0000 |
Chris Cannam |
Another 3.0.1 pre
|
Mon, 06 Mar 2017 09:35:03 +0000 |
Chris Cannam |
More useful diagnostics for MIDI startup
|
Mon, 06 Mar 2017 09:33:33 +0000 |
Chris Cannam |
This symbol has changed in newer RtMidi, supply both
|
Sun, 05 Mar 2017 21:51:11 +0000 |
Chris Cannam |
Update RtMidi build to v2.1.1
|
Sun, 05 Mar 2017 17:19:40 +0000 |
Chris Cannam |
Merge
|
Sun, 05 Mar 2017 17:16:34 +0000 |
Chris Cannam |
Fix crash when using speed controls on Windows (due to KissFFT linkage conflict). More debug information on startup.
|
Sun, 05 Mar 2017 17:14:31 +0000 |
Chris Cannam |
This will be a 3.0.1 pre build
|
Sun, 05 Mar 2017 17:14:17 +0000 |
Chris Cannam |
More debug output during startup
|
Thu, 02 Mar 2017 18:12:35 +0000 |
Chris Cannam |
Added tag sv_v3.0 for changeset c3380c78811f
|
Wed, 01 Mar 2017 14:57:18 +0000 |
Chris Cannam |
Added tag sv_v3.0rc1 for changeset 811fbe905f5e
sv_v3.0
|
Wed, 01 Mar 2017 14:54:21 +0000 |
Chris Cannam |
Add brief mention of Piper
sv_v3.0rc1
|
Wed, 01 Mar 2017 09:46:09 +0000 |
Chris Cannam |
Update translation strings
|
Tue, 28 Feb 2017 17:03:03 +0000 |
Chris Cannam |
Docker file for 3.0 build
|
Tue, 28 Feb 2017 16:42:52 +0000 |
Chris Cannam |
Fix failure to respect saved linear-scale setting in layer when the model suggests it would prefer log scale
|
Tue, 28 Feb 2017 16:35:16 +0000 |
Chris Cannam |
Fix scale range and attribute name in colour 3d plot
|
Tue, 28 Feb 2017 15:10:50 +0000 |
Chris Cannam |
Fix equality comparison that caused test case failure on 32-bit build
|
Tue, 28 Feb 2017 14:47:37 +0000 |
Chris Cannam |
Next version will identify as 3.0 (as it's going to be an RC); remove beta dialog
|
Tue, 28 Feb 2017 14:33:31 +0000 |
Chris Cannam |
Emit
|
Tue, 28 Feb 2017 14:20:56 +0000 |
Chris Cannam |
Ctrl-click, and middle-button click, on level-pan widget reset to default (not implemented yet for level-pan tool button though)
|
Tue, 28 Feb 2017 14:08:10 +0000 |
Chris Cannam |
Fix normalisation ranges etc in Colour 3D Plot
|
Tue, 28 Feb 2017 11:26:24 +0000 |
Chris Cannam |
Remove commented-out code
|
Tue, 28 Feb 2017 11:21:49 +0000 |
Chris Cannam |
LogRange tests
|
Tue, 28 Feb 2017 10:31:01 +0000 |
Chris Cannam |
It's going to be March...
|
Tue, 28 Feb 2017 09:27:34 +0000 |
Chris Cannam |
Fix crash when trying to set object name on nonexistent model
|
Mon, 27 Feb 2017 16:52:47 +0000 |
Chris Cannam |
Write aggregate models to .sv file when saving document. They still are not reloaded, but I think this is far as I'm prepared to go for 3.0.
|
Mon, 27 Feb 2017 16:52:12 +0000 |
Chris Cannam |
Set a more appropriate name on aggregate model when deciding to retain it
|
Mon, 27 Feb 2017 16:26:37 +0000 |
Chris Cannam |
Store aggregate models in the document and release them when they are invalidated (because their components have been released). They're no longer leaked, but we still don't save them in the session file.
|
Mon, 27 Feb 2017 15:44:14 +0000 |
Chris Cannam |
And say so
|
Mon, 27 Feb 2017 15:43:30 +0000 |
Chris Cannam |
Invalidate an aggregate model when one of its components announces it's about to be deleted
|
Mon, 27 Feb 2017 15:07:27 +0000 |
Chris Cannam |
Update OSC handler: fix play (which wasn't working because it didn't resume audio driver) and speedup (wrong mapping for the new speed controls), and add more sensible new speed method
|
Mon, 27 Feb 2017 13:47:05 +0000 |
Chris Cannam |
Minor tweak
|
Mon, 27 Feb 2017 13:37:43 +0000 |
Chris Cannam |
Fix typo in condition operator; ensure c++11 used for config checks with gcc
|
Mon, 27 Feb 2017 13:24:29 +0000 |
Chris Cannam |
Update configure check for Cap'n Proto to avoid directly looking up mangled symbols
|
Sat, 25 Feb 2017 19:24:13 +0000 |
Chris Cannam |
Rework network permission tester to note that aggregate info may be used, and tweak for clarity
|
Fri, 24 Feb 2017 15:57:13 +0000 |
Chris Cannam |
Update vamp-plugin-sdk subrepo to v2.7 tag
|
Fri, 24 Feb 2017 15:07:19 +0000 |
Chris Cannam |
Update translateable strings
|
Fri, 24 Feb 2017 11:12:49 +0000 |
Chris Cannam |
Note the release ID stuff to the debug log as well as in the about box
|
Fri, 24 Feb 2017 10:16:40 +0000 |
Chris Cannam |
If we can't open a record device, fall back to playback-only mode
|
Fri, 24 Feb 2017 10:16:06 +0000 |
Chris Cannam |
Coalesce lines in docker install
|
Thu, 23 Feb 2017 17:18:03 +0000 |
Chris Cannam |
Subrepo update
|
Thu, 23 Feb 2017 17:05:26 +0000 |
Chris Cannam |
merge
|
Fri, 10 Feb 2017 14:49:45 +0000 |
Chris Cannam |
Update to match slightly changed Piper Vamp C++ API
|
Thu, 23 Feb 2017 10:35:22 +0000 |
Chris Cannam |
Added tag sv_v3.0beta4 for changeset d739444d2c48
|
Thu, 23 Feb 2017 10:34:56 +0000 |
Chris Cannam |
Avoid Windows error dialog for DLL load failures in checker
sv_v3.0beta4
|
Thu, 23 Feb 2017 10:14:35 +0000 |
Chris Cannam |
Added tag sv_v3.0beta4 for changeset 2f13bdee5cb5
|
Thu, 23 Feb 2017 10:02:23 +0000 |
Chris Cannam |
More beta docker deployments
|
Thu, 23 Feb 2017 09:22:56 +0000 |
Chris Cannam |
Debug notes, tidying
|
Wed, 22 Feb 2017 12:04:07 +0000 |
Chris Cannam |
Merge
|
Wed, 22 Feb 2017 12:01:39 +0000 |
Chris Cannam |
Fix various "model deleted with no aboutToDelete notification" warnings (and one associated potential memory leak)
|
Wed, 22 Feb 2017 11:29:44 +0000 |
Chris Cannam |
Next release will be beta4
|
Wed, 22 Feb 2017 11:19:51 +0000 |
Chris Cannam |
Overrides
|
Wed, 22 Feb 2017 09:53:58 +0000 |
Chris Cannam |
Add activity log output to debug log too
|
Tue, 21 Feb 2017 21:33:27 +0000 |
Chris Cannam |
A bit more logging for PortAudio driver
|
Tue, 21 Feb 2017 21:10:15 +0000 |
Chris Cannam |
Merge
|
Tue, 21 Feb 2017 21:09:26 +0000 |
Chris Cannam |
Fixes to fdopen usage in svcore
|
Tue, 21 Feb 2017 21:07:14 +0000 |
Chris Cannam |
Add background images to win32 installer as well
|
Tue, 21 Feb 2017 17:53:51 +0000 |
Chris Cannam |
Remove some icons that are no longer used in unscalable versions; reorder for closer to alphabetical order
|
Tue, 21 Feb 2017 17:42:40 +0000 |
Chris Cannam |
Fix occasional off-by-one error in resampled audio file reader
|
Tue, 21 Feb 2017 16:58:49 +0000 |
Chris Cannam |
Add necessary file
|
Tue, 21 Feb 2017 16:04:11 +0000 |
Chris Cannam |
Subrepo update
|
Tue, 21 Feb 2017 15:33:03 +0000 |
Chris Cannam |
Logging from audio I/O
|
Tue, 21 Feb 2017 11:12:07 +0000 |
Chris Cannam |
Fix #1792 measure tool crosshairs rendered in wrong colour. Also extend crosshairs over the no-man's-land at the left
|
Fri, 10 Feb 2017 11:30:29 +0000 |
Lucas Thompson |
Change setDesiredExtractor signature to take ServerDescription aggregate.
dev/refactor-piper-related
|
Fri, 10 Feb 2017 11:15:19 +0000 |
Lucas Thompson |
Introduce some POD structs for describing an external server application and the desired libraries to load from it, and disambiguating between empty list request and invalid list request. This allows for overriding PiperVampPluginFactory behaviour for using a PluginScan to populate the list request.
dev/refactor-piper-related
|
Thu, 09 Feb 2017 14:32:07 +0000 |
Lucas Thompson |
Invert control, injecting a server path on construction. Also add initializer_list constructor for multiple servers.
dev/refactor-piper-related
|
Wed, 08 Feb 2017 13:57:23 +0000 |
Chris Cannam |
Added tag sv_v3.0beta3 for changeset 881d7f99bba3
|
Wed, 08 Feb 2017 13:57:04 +0000 |
Chris Cannam |
Probably better background images
sv_v3.0beta3
|
Tue, 07 Feb 2017 16:35:36 +0000 |
Chris Cannam |
Provisional installer backgrounds
|
Tue, 07 Feb 2017 16:19:49 +0000 |
Chris Cannam |
Update changelog
|
Tue, 07 Feb 2017 15:36:19 +0000 |
Chris Cannam |
Next build to be beta3
|
Tue, 07 Feb 2017 14:55:19 +0000 |
Chris Cannam |
Some work to make spectrum layers (and slice layers generally) zoomable in the frequency axis. Also fixes a number of view id mixups in SliceLayer which broke offset calculations for the x axis scale.
|
Mon, 06 Feb 2017 13:00:43 +0000 |
Chris Cannam |
Update piper-cpp subrepo
|
Mon, 06 Feb 2017 09:19:10 +0000 |
Chris Cannam |
Merge
|
Mon, 06 Feb 2017 09:18:55 +0000 |
Chris Cannam |
Subrepo update
|
Tue, 31 Jan 2017 11:13:20 +0000 |
Chris Cannam |
Handle exceptions raised during plugin processing (as opposed to on init/configure, which were already handled)
|
Wed, 01 Feb 2017 21:03:34 +0000 |
Chris Cannam |
Subrepo update
|
Fri, 27 Jan 2017 13:19:21 +0000 |
Chris Cannam |
More tweaks to when to render from the middle
|
Fri, 27 Jan 2017 11:57:49 +0000 |
Chris Cannam |
Looks like we can be a bit more relaxed here
|
Fri, 27 Jan 2017 11:39:42 +0000 |
Chris Cannam |
Wire up normalise-visible-area mode in colour 3d plot
|
Thu, 26 Jan 2017 21:20:06 +0000 |
Chris Cannam |
Various rendering adjustments for layers in svgui
|
Thu, 26 Jan 2017 14:11:20 +0000 |
Chris Cannam |
Reduce amount of copying in FFTModel
|
Thu, 26 Jan 2017 12:04:03 +0000 |
Chris Cannam |
Randomise start offset for partial paints, it looks (I think) a little better
|
Thu, 26 Jan 2017 11:55:11 +0000 |
Chris Cannam |
Measure time taken to render per pixel, and use the time last time around to decide whether to be time constrained this time around
|
Thu, 26 Jan 2017 10:41:50 +0000 |
Chris Cannam |
Fix #1781 Running CQ Chromagram spits out stacks of "bin index out of range" warnings
|
Sat, 21 Jan 2017 12:26:33 +0000 |
Chris Cannam |
I think that switch to a git subrepo was a mistake. Let's go back to the ssw mirror.
|
Fri, 20 Jan 2017 22:26:35 +0000 |
Chris Cannam |
Update piper-cpp subrepo
|
Fri, 20 Jan 2017 18:05:41 +0000 |
Chris Cannam |
Update piper-cpp to github repo, and adjust build for revised layout in it
|
Thu, 19 Jan 2017 11:01:41 +0000 |
Chris Cannam |
Fix absurd typo that was preventing transforms from running at all!
|
Thu, 19 Jan 2017 10:50:04 +0000 |
Chris Cannam |
Report on failures that happen while configuring a transform
|
Thu, 19 Jan 2017 09:57:58 +0000 |
Chris Cannam |
Allow the completeness checker to report failure (invalid message) as well as incompleteness
|
Wed, 18 Jan 2017 14:53:07 +0000 |
Chris Cannam |
Minor debug bit
|
Wed, 18 Jan 2017 14:22:40 +0000 |
Chris Cannam |
Fix hang when trying to run transform for which the plugin refuses to initialise at all
|
Mon, 16 Jan 2017 14:34:59 +0000 |
Chris Cannam |
Added tag sv_v3.0beta2 for changeset b6f1052dbda1
|
Mon, 16 Jan 2017 14:34:44 +0000 |
Chris Cannam |
Fix annoying chicken-and-egg typo
sv_v3.0beta2
|
Mon, 16 Jan 2017 14:31:32 +0000 |
Chris Cannam |
Added tag sv_v3.0beta2 for changeset 7a8e909a15da
|
Mon, 16 Jan 2017 14:31:23 +0000 |
Chris Cannam |
Fix compiler warning
|
Mon, 16 Jan 2017 14:31:16 +0000 |
Chris Cannam |
Dockerfile for 3.0beta2
|
Mon, 16 Jan 2017 13:58:28 +0000 |
Chris Cannam |
Next release will be beta2
|
Mon, 16 Jan 2017 13:58:20 +0000 |
Chris Cannam |
Copy checker to top-level dir
|
Mon, 16 Jan 2017 10:00:19 +0000 |
Chris Cannam |
Fix incorrect call to getColumn() that broke the peak-frequency spectrogram and close zoom levels of the colour 3d plot
|
Fri, 13 Jan 2017 21:19:42 +0000 |
Chris Cannam |
With updated bqvec, shouldn't need any allocator hints
|
Fri, 13 Jan 2017 15:44:39 +0000 |
Chris Cannam |
Debug toward tracking down strange peak-frequency spectrogram update problem
|
Fri, 13 Jan 2017 15:37:07 +0000 |
Chris Cannam |
Make getPreferredPeakCache check the render mode itself
|
Fri, 13 Jan 2017 13:12:37 +0000 |
Chris Cannam |
Fix spurious test failure in 32-bit build
|
Fri, 13 Jan 2017 10:30:06 +0000 |
Chris Cannam |
Merge in subrepos
|
Fri, 13 Jan 2017 10:22:04 +0000 |
Chris Cannam |
Fix memory leak of cache pixmaps in View
|
Thu, 12 Jan 2017 17:29:59 +0000 |
Chris Cannam |
Fix (I think) crash on exit on Windows having loaded an mp3
|
Thu, 12 Jan 2017 14:09:44 +0000 |
Chris Cannam |
Some Ubuntu/Fedora docker build material
|
Thu, 12 Jan 2017 11:48:03 +0000 |
Chris Cannam |
Use explicit include paths; these seem to be picking up the wrong include on Fedora only (strangely)
|
Thu, 12 Jan 2017 09:02:28 +0000 |
Chris Cannam |
Update Piper server to suspend stdout between responses; fixes hang on startup with certain Vamp plugins
|
Wed, 11 Jan 2017 17:48:21 +0000 |
Chris Cannam |
Complete that fix for the record target
|
Wed, 11 Jan 2017 17:46:37 +0000 |
Chris Cannam |
Fix flickery level meters
|
Wed, 11 Jan 2017 17:36:21 +0000 |
Chris Cannam |
Update configure to note capnp version dependency
|
Wed, 11 Jan 2017 14:21:44 +0000 |
Chris Cannam |
Add package step to docker file
|
Wed, 11 Jan 2017 14:20:38 +0000 |
Chris Cannam |
Update these so they work in Docker
|
Wed, 11 Jan 2017 09:44:03 +0000 |
Chris Cannam |
Comment field from LibraZiK distro
|
Tue, 10 Jan 2017 17:26:10 +0000 |
Chris Cannam |
Added tag sv_v3.0beta1 for changeset 3173259cdcc6
|
Tue, 10 Jan 2017 17:25:55 +0000 |
Chris Cannam |
Dockerfile that builds the executable on Ubuntu 16.04, hopefully as the start of some more useful packaging strategy
sv_v3.0beta1
|
Tue, 10 Jan 2017 17:18:48 +0000 |
Chris Cannam |
Ah, of course I was using the wrong variable here
|
Tue, 10 Jan 2017 17:13:53 +0000 |
Chris Cannam |
Typo fix and small reorder
|
Tue, 10 Jan 2017 17:08:38 +0000 |
Chris Cannam |
Fix "argument missing"
|
Tue, 10 Jan 2017 17:04:23 +0000 |
Chris Cannam |
Subrepo update
|
Tue, 10 Jan 2017 16:56:48 +0000 |
Chris Cannam |
Fix compiler warning, remove some debug out
|
Tue, 10 Jan 2017 16:21:32 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
|
Tue, 10 Jan 2017 16:10:33 +0000 |
Chris Cannam |
Added tag last_v2.5_on_default_branch for changeset e6c7585863fe
|
Tue, 10 Jan 2017 16:04:03 +0000 |
Chris Cannam |
Show warning about beta release
3.0-integration
|
Tue, 10 Jan 2017 15:56:01 +0000 |
Chris Cannam |
Add dates to change log
3.0-integration
|
Tue, 10 Jan 2017 14:19:17 +0000 |
Chris Cannam |
Merge
3.0-integration
|
Tue, 10 Jan 2017 14:18:34 +0000 |
Chris Cannam |
When importing CSV, if the first line doesn't have a separator, continue to leave the separator indeterminate until we arrive at a line that does. Fixes inability to load correctly CSV files in which some lines have more columns than others
3.0-integration
|
Tue, 10 Jan 2017 14:01:13 +0000 |
Chris Cannam |
Better sizing on the Mac I think
3.0-integration
|
Tue, 10 Jan 2017 13:58:06 +0000 |
Chris Cannam |
Add "What's New" to help menu; primp up About box
3.0-integration
|
Tue, 10 Jan 2017 11:28:35 +0000 |
Chris Cannam |
Update PortAudio build for Win64
3.0-integration
|
Tue, 10 Jan 2017 11:08:14 +0000 |
Chris Cannam |
Win32 fixes
3.0-integration
|
Tue, 10 Jan 2017 11:06:20 +0000 |
Chris Cannam |
Some platforms don't use native Ogg/Vorbis libraries
3.0-integration
|
Tue, 10 Jan 2017 10:58:25 +0000 |
Chris Cannam |
Use W64 instead of WAV for decoded files; use Ogg reader in preference to WAV one for Ogg files (WAV reader works, via libsndfile, but doesn't load metadata); fix Ogg reader to use QFile open instead of non-Win32-compatible API; add more encoder tests, audio writer test, midi reader test
3.0-integration
|
Tue, 10 Jan 2017 10:56:08 +0000 |
Chris Cannam |
Minor tweaks to CHANGELOG
3.0-integration
|
Mon, 09 Jan 2017 18:51:42 +0000 |
Chris Cannam |
Remove unneeded debug
3.0-integration
|
Mon, 09 Jan 2017 16:48:29 +0000 |
Chris Cannam |
Add Linux install target
3.0-integration
|
Mon, 09 Jan 2017 16:41:45 +0000 |
Chris Cannam |
Fix a strictly-incorrect #if guard
3.0-integration
|
Mon, 09 Jan 2017 16:34:11 +0000 |
Chris Cannam |
Merge
3.0-integration
|
Mon, 09 Jan 2017 16:31:58 +0000 |
Chris Cannam |
Fix inadequate #if guard for non-gcc builds
3.0-integration
|
Mon, 09 Jan 2017 16:09:17 +0000 |
Chris Cannam |
Try a deep codesign instead
3.0-integration
|
Mon, 09 Jan 2017 14:33:36 +0000 |
Chris Cannam |
More win32 build fixes
3.0-integration
|
Mon, 09 Jan 2017 14:03:10 +0000 |
Chris Cannam |
Further win32 build updates
3.0-integration
|
Mon, 09 Jan 2017 13:51:39 +0000 |
Chris Cannam |
Further win32 build updates
3.0-integration
|
Mon, 09 Jan 2017 11:53:06 +0000 |
Chris Cannam |
Fixes and updates for 32-bit Windows build
3.0-integration
|
Mon, 09 Jan 2017 10:18:47 +0000 |
Chris Cannam |
Doc updates
3.0-integration
|
Mon, 09 Jan 2017 10:14:59 +0000 |
Chris Cannam |
Add checker README; rename plugin-checker-helper binary (back) to vamp-plugin-load-checker -- I decided it was more useful to have a distinctive name for the installed binary than it was important to show that it was plugin-agnostic
3.0-integration
|
Sun, 08 Jan 2017 19:36:27 +0000 |
Chris Cannam |
Win64 installer updates
3.0-integration
|
Sun, 08 Jan 2017 16:33:20 +0000 |
Chris Cannam |
More of an effort at 64-bit Win installer
3.0-integration
|
Sun, 08 Jan 2017 16:10:28 +0000 |
Chris Cannam |
Update checker with version printout
3.0-integration
|
Fri, 06 Jan 2017 21:38:33 +0000 |
Chris Cannam |
Stub win64 deploy, + ogg testfiles
3.0-integration
|
Fri, 06 Jan 2017 21:04:53 +0000 |
Chris Cannam |
And similar approach for the writer
3.0-integration
|
Fri, 06 Jan 2017 20:51:47 +0000 |
Chris Cannam |
Take a different approach to using libsndfile -- the _fd function doesn't work for me in this build, so use the wchar api
3.0-integration
|
Fri, 06 Jan 2017 16:40:11 +0000 |
Chris Cannam |
Update WAV/MP3/BZipFileDevice code to avoid using local 8-bit encoding
3.0-integration
|
Fri, 06 Jan 2017 15:53:02 +0000 |
Chris Cannam |
Fix typo in encoded string
3.0-integration
|
Fri, 06 Jan 2017 15:44:55 +0000 |
Chris Cannam |
More work on getting tests (especially file encoding ones) running on Windows. Various problems here to do with interaction with test filenames in Hg repos
3.0-integration
|
Fri, 06 Jan 2017 12:11:08 +0000 |
Chris Cannam |
Add filename encoding tests
3.0-integration
|
Fri, 06 Jan 2017 11:21:09 +0000 |
Chris Cannam |
Untabify, comment test that doesn't apply on Windows
3.0-integration
|
Fri, 06 Jan 2017 09:50:13 +0000 |
Chris Cannam |
Untabify some more
3.0-integration
|
Fri, 06 Jan 2017 09:43:41 +0000 |
Chris Cannam |
Improved debug output for file open troubleshooting
3.0-integration
|
Fri, 06 Jan 2017 09:15:36 +0000 |
Chris Cannam |
Untabify
3.0-integration
|
Thu, 05 Jan 2017 20:31:54 +0000 |
Chris Cannam |
Couple of minor Windows updates
3.0-integration
|
Thu, 05 Jan 2017 14:38:11 +0000 |
Chris Cannam |
No hit counts in release
3.0-integration
|
Thu, 05 Jan 2017 14:30:49 +0000 |
Chris Cannam |
More cache hit counts; make debug output from colour 3d plot renderer (even though it is to SVDEBUG) appear only with explicit debug flag
3.0-integration
|
Thu, 05 Jan 2017 14:17:47 +0000 |
Chris Cannam |
Don't start in the middle when repainting the whole width while using a peak cache. It looks funny.
3.0-integration
|
Thu, 05 Jan 2017 14:02:54 +0000 |
Chris Cannam |
Make the colour 3d plot renderer able to support more than one level of peak cache; introduce a second "peak" cache for the spectrogram layer that actually has a 1-1 column relationship with the underlying FFT model, and use it in addition to the existing peak cache if memory is plentiful. Makes spectrograms appear much faster in many common situations.
3.0-integration
|
Thu, 05 Jan 2017 11:10:57 +0000 |
Chris Cannam |
Recreate FFT model when something changes, not the next time it's requested (avoids extra work when only retrieving the model)
3.0-integration
|
Wed, 04 Jan 2017 19:11:10 +0000 |
Chris Cannam |
Merge in subrepo
3.0-integration
|
Wed, 04 Jan 2017 16:53:06 +0000 |
Chris Cannam |
Pull out record buffer into a separate RT-ish thread
3.0-integration
|
Wed, 04 Jan 2017 16:03:12 +0000 |
Chris Cannam |
Wire up record monitoring
3.0-integration
|
Wed, 04 Jan 2017 14:22:39 +0000 |
Chris Cannam |
Make writable model updating explicit rather than essentially an arbitrary hidden accident
3.0-integration
|
Wed, 04 Jan 2017 13:23:18 +0000 |
Chris Cannam |
Add record update timer (very crude this)
3.0-integration
|
Wed, 04 Jan 2017 12:05:14 +0000 |
Chris Cannam |
Close wave file writer when recording stops (instead of leaving record file unclosed until the model is deleted)
3.0-integration
|
Wed, 04 Jan 2017 11:48:03 +0000 |
Chris Cannam |
Fix race condition in first-time recording, where adding the recording wave model would prompt the audio play source to note that its channel count had increased (from 0 to, say, 2) and thus to cause the audio device to be reopened, stopping recording. Fix is to make this only happen if channel count increases beyond that of the device, which shouldn't happen in the recording case
3.0-integration
|
Wed, 04 Jan 2017 09:57:13 +0000 |
Chris Cannam |
Report audio driver startup error
3.0-integration
|
Tue, 03 Jan 2017 16:50:50 +0000 |
Chris Cannam |
Mention hybrid normalisation in changelog
3.0-integration
|
Tue, 03 Jan 2017 16:45:43 +0000 |
Chris Cannam |
Avoid accidentally resetting locale to the empty string when reading pref
3.0-integration
|
Tue, 03 Jan 2017 16:39:42 +0000 |
Chris Cannam |
Run update-i18n script
3.0-integration
|
Tue, 03 Jan 2017 16:23:11 +0000 |
Chris Cannam |
Provisionally add labels for normalisation menu (sigh)
3.0-integration
|
Tue, 03 Jan 2017 16:14:59 +0000 |
Chris Cannam |
Add help icon, + update subrepo
3.0-integration
|
Tue, 03 Jan 2017 16:14:31 +0000 |
Chris Cannam |
Some copyright dates and build adjustments
3.0-integration
|
Tue, 03 Jan 2017 16:13:48 +0000 |
Chris Cannam |
Next actual release will be 3.0-beta1
3.0-integration
|
Tue, 03 Jan 2017 15:15:26 +0000 |
Chris Cannam |
Store/recall colours by hex name; simpler and more general (was having trouble with reloading on Mac). Also update subrepos inc PortAudio build
3.0-integration
|
Tue, 03 Jan 2017 14:34:46 +0000 |
Chris Cannam |
Merge
3.0-integration
|
Tue, 03 Jan 2017 14:32:53 +0000 |
Chris Cannam |
Fix to removal of icons from menus on the Mac
3.0-integration
|
Tue, 03 Jan 2017 14:36:31 +0000 |
Chris Cannam |
Fix accidental breakage of PNG export while adding SVG export
3.0-integration
|
Tue, 03 Jan 2017 13:30:47 +0000 |
Chris Cannam |
Try to handle audio device selection more sensibly in cases where only one audio implementation is compiled in
3.0-integration
|
Tue, 03 Jan 2017 13:05:02 +0000 |
Chris Cannam |
Don't show icons on menus in OSX
3.0-integration
|
Tue, 03 Jan 2017 13:04:35 +0000 |
Chris Cannam |
Minor tweak
3.0-integration
|
Tue, 03 Jan 2017 11:55:29 +0000 |
Chris Cannam |
Fix some compiler warnings
3.0-integration
|
Tue, 03 Jan 2017 11:40:27 +0000 |
Chris Cannam |
Update some subrepos
3.0-integration
|
Tue, 20 Dec 2016 11:53:14 +0000 |
Chris Cannam |
Fix erroneous use of single-colour setting to determine dark/light background when in segmentation mode
3.0-integration
|
Tue, 20 Dec 2016 10:49:24 +0000 |
Chris Cannam |
Further PropertyBox layout overhaul: avoid crash (/ assertion failure) when property type changes from e.g. colour to colourmap, by replacing the existing widget within the layout rather than trying to repopulate it
3.0-integration
|
Mon, 19 Dec 2016 16:34:38 +0000 |
Chris Cannam |
Merge from branch svg, and thus (in some subrepos) from levelpanwidget
3.0-integration
|
Mon, 19 Dec 2016 16:32:34 +0000 |
Chris Cannam |
Implement "Export SVG file..."
svg
|
Sat, 17 Dec 2016 11:06:48 +0000 |
Chris Cannam |
A useful simplification in rate handling: don't reset to 0 when last model goes
3.0-integration
|
Fri, 16 Dec 2016 19:35:57 +0000 |
Chris Cannam |
Fix incorrect initial display levels in LevelPanWidget
3.0-integration
|
Fri, 16 Dec 2016 19:26:21 +0000 |
Chris Cannam |
Add overview colour preference
3.0-integration
|
Fri, 16 Dec 2016 19:25:17 +0000 |
Chris Cannam |
Start updating changelog for 3.0
3.0-integration
|
Fri, 16 Dec 2016 16:29:53 +0000 |
Chris Cannam |
Support mouse wheel on level-pan tool button
3.0-integration
|
Fri, 16 Dec 2016 15:55:59 +0000 |
Chris Cannam |
Add swatches to colour map combo (optionally, as it turns out they are quite visually distracting)
3.0-integration
|
Fri, 16 Dec 2016 14:16:06 +0000 |
Chris Cannam |
Introduce a colour map combo too. Doesn't yet have swatches
3.0-integration
|
Fri, 16 Dec 2016 13:10:21 +0000 |
Chris Cannam |
Take advantage of the fact that a group layout is now always used, to simplify code
3.0-integration
|
Fri, 16 Dec 2016 13:08:33 +0000 |
Chris Cannam |
Introduce colour combobox class, to replace ad-hoc code in property box
3.0-integration
|
Fri, 16 Dec 2016 11:11:41 +0000 |
Chris Cannam |
Windows build fixes
3.0-integration
|
Thu, 15 Dec 2016 16:29:27 +0000 |
Chris Cannam |
Adjust spacing in property box
3.0-integration
|
Thu, 15 Dec 2016 16:13:16 +0000 |
Chris Cannam |
Merge from branch levelpanwidget
3.0-integration
|
Thu, 15 Dec 2016 15:34:33 +0000 |
Chris Cannam |
Some adjustments to make view elements clearer and more correctly sized, especially on hidpi (non-pixel-doubling) systems
levelpanwidget
|
Thu, 15 Dec 2016 15:12:44 +0000 |
Chris Cannam |
Retina thumbwheels
levelpanwidget
|
Thu, 15 Dec 2016 14:53:05 +0000 |
Chris Cannam |
Rejig preferences dialog to make it a bit less cumbersome
levelpanwidget
|
Thu, 15 Dec 2016 14:40:30 +0000 |
Chris Cannam |
Property box layout fixes etc
levelpanwidget
|
Thu, 15 Dec 2016 14:40:20 +0000 |
Chris Cannam |
When the window is actually being closed, we need to close the prefs quickly (otherwise we get a crash on Mac)
levelpanwidget
|
Thu, 15 Dec 2016 11:54:12 +0000 |
Chris Cannam |
Make play params area of property box look a bit better on OSX
levelpanwidget
|
Thu, 15 Dec 2016 11:02:25 +0000 |
Chris Cannam |
Small OSX fixes
levelpanwidget
|
Thu, 15 Dec 2016 10:36:41 +0000 |
Chris Cannam |
Moving around some UI bits
levelpanwidget
|
Thu, 15 Dec 2016 08:58:43 +0000 |
Chris Cannam |
Update to current bqresample API
3.0-integration
|
Wed, 14 Dec 2016 14:28:41 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
levelpanwidget
|
Wed, 14 Dec 2016 11:56:58 +0000 |
Chris Cannam |
Play-selection fix, and some other subrepo updates
3.0-integration
|
Tue, 13 Dec 2016 16:23:48 +0000 |
Chris Cannam |
Fix some compiler problems
3.0-integration
|
Tue, 13 Dec 2016 16:06:28 +0000 |
Chris Cannam |
QuickTime file reader is no longer used on any platform and is probably rotting. Remove it
3.0-integration
|
Tue, 13 Dec 2016 15:56:50 +0000 |
Chris Cannam |
Explanatory text
3.0-integration
|
Tue, 13 Dec 2016 15:47:11 +0000 |
Chris Cannam |
Subrepo updates
3.0-integration
|
Tue, 13 Dec 2016 15:23:21 +0000 |
Chris Cannam |
Update to use bqvec allocator for float vectors
3.0-integration
|
Tue, 13 Dec 2016 13:23:51 +0000 |
Chris Cannam |
Minor comment tweaks
3.0-integration
|
Tue, 13 Dec 2016 12:03:48 +0000 |
Chris Cannam |
Handle increases in the overall channel count by closing and reopening the audio device.
3.0-integration
|
Mon, 12 Dec 2016 17:15:24 +0000 |
Chris Cannam |
Remove unused signal
3.0-integration
|
Mon, 12 Dec 2016 17:08:10 +0000 |
Chris Cannam |
Jump to start when recording, so you can see something is happening
3.0-integration
|
Mon, 12 Dec 2016 17:07:53 +0000 |
Chris Cannam |
Open record container folder instead of record folder (so you can see all existing recordings, no matter when they were made)
3.0-integration
|
Mon, 12 Dec 2016 17:07:09 +0000 |
Chris Cannam |
Minor tidy
3.0-integration
|
Mon, 12 Dec 2016 17:01:51 +0000 |
Chris Cannam |
Fix race condition (in creating buffers vs starting process thread) and failure to reopen device in PortAudio driver
3.0-integration
|
Mon, 12 Dec 2016 17:01:16 +0000 |
Chris Cannam |
Avoid overflowing vector if number of devices becomes smaller
3.0-integration
|
Mon, 12 Dec 2016 15:46:53 +0000 |
Chris Cannam |
Merge
3.0-integration
|
Mon, 12 Dec 2016 15:45:33 +0000 |
Chris Cannam |
Reopen the audio device directly when preference is changed
3.0-integration
|
Mon, 12 Dec 2016 15:18:52 +0000 |
Chris Cannam |
Some hackery toward having a zoomlevel type
zoom
|
Mon, 12 Dec 2016 10:12:10 +0000 |
Chris Cannam |
Build fix in bqvec
3.0-integration
|
Mon, 12 Dec 2016 09:13:44 +0000 |
Chris Cannam |
Subrepo update
3.0-integration
|
Fri, 09 Dec 2016 19:27:16 +0000 |
Chris Cannam |
A bit more slack; make debug be off by default
3.0-integration
|
Fri, 09 Dec 2016 19:04:33 +0000 |
Chris Cannam |
Fix compiler warnings
3.0-integration
|
Fri, 09 Dec 2016 18:01:55 +0000 |
Chris Cannam |
Merge from branch bqresample
3.0-integration
|
Fri, 09 Dec 2016 17:56:10 +0000 |
Chris Cannam |
Debug addition
bqresample
|
Fri, 09 Dec 2016 14:40:49 +0000 |
Chris Cannam |
Fixes to sample rate and latency handling
bqresample
|
Fri, 09 Dec 2016 13:46:34 +0000 |
Chris Cannam |
Some fixes to sample rate management
bqresample
|
Fri, 09 Dec 2016 10:24:40 +0000 |
Chris Cannam |
Update to reflect bqresample API change
bqresample
|
Wed, 07 Dec 2016 14:48:15 +0000 |
Chris Cannam |
Fixes to (and debug output in!) ResamplerWrapper
bqresample
|
Wed, 07 Dec 2016 13:57:45 +0000 |
Chris Cannam |
Add a ResamplerWrapper
bqresample
|
Wed, 07 Dec 2016 12:04:57 +0000 |
Chris Cannam |
Update subrepo
bqresample
|
Wed, 07 Dec 2016 11:54:02 +0000 |
Chris Cannam |
Merge from branch bqaudioio
bqresample
|
Wed, 07 Dec 2016 11:53:44 +0000 |
Chris Cannam |
Merge from branch bqresample
bqaudioio
|
Wed, 07 Dec 2016 11:53:19 +0000 |
Chris Cannam |
Audio device selection
bqresample
|
Tue, 06 Dec 2016 16:07:22 +0000 |
Chris Cannam |
Fix incorrect return to Pulse when too few samples available (caused play hang)
bqresample
|
Tue, 06 Dec 2016 15:59:06 +0000 |
Chris Cannam |
Update for bqaudioio changes
bqresample
|
Tue, 06 Dec 2016 09:47:47 +0000 |
Chris Cannam |
Add faders svg
levelpanwidget
|
Tue, 06 Dec 2016 09:47:27 +0000 |
Chris Cannam |
Some work on play parameters and level controls in property box
levelpanwidget
|
Tue, 06 Dec 2016 09:20:10 +0000 |
Chris Cannam |
Switch to level-pan tool button in property box
levelpanwidget
|
Mon, 05 Dec 2016 17:13:01 +0000 |
Chris Cannam |
Introduce level-pan widget to property box
levelpanwidget
|
Mon, 05 Dec 2016 17:03:09 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
levelpanwidget
|
Mon, 05 Dec 2016 16:54:19 +0000 |
Chris Cannam |
Start pruning other resampler logic than bqresample
bqresample
|
Mon, 05 Dec 2016 16:39:03 +0000 |
Chris Cannam |
Remove resampler quality option (#1760)
3.0-integration
|
Mon, 05 Dec 2016 16:29:13 +0000 |
Chris Cannam |
Remove full-screen entry on OSX (#1759: SV's full-screen mode interacts badly with OSX full-screen mode)
3.0-integration
|
Mon, 05 Dec 2016 15:47:40 +0000 |
Chris Cannam |
Start incorporating level-pan widgets
levelpanwidget
|
Mon, 05 Dec 2016 14:51:25 +0000 |
Chris Cannam |
Another use of WidgetScale
more-hidpi
|
Mon, 05 Dec 2016 14:31:53 +0000 |
Chris Cannam |
Some icon updates
more-hidpi
|
Mon, 05 Dec 2016 12:04:23 +0000 |
Chris Cannam |
Scale the sizes of a few more UI elements
more-hidpi
|
Fri, 02 Dec 2016 09:14:11 +0000 |
Chris Cannam |
Add Apple Lossless files
3.0-integration
|
Fri, 02 Dec 2016 09:13:52 +0000 |
Chris Cannam |
Further updates to tests and debug output for file reading on OSX
3.0-integration
|
Thu, 01 Dec 2016 20:49:55 +0000 |
Chris Cannam |
More faffing with tests, to no great effect
3.0-integration
|
Thu, 01 Dec 2016 17:45:41 +0000 |
Chris Cannam |
Add gapless preference to prefs dialog; much work on audio read tests
3.0-integration
|
Wed, 30 Nov 2016 21:02:24 +0000 |
Chris Cannam |
Update dependency builds for OSX
3.0-integration
|
Wed, 30 Nov 2016 13:37:53 +0000 |
Chris Cannam |
Subrepo update
3.0-integration
|
Wed, 30 Nov 2016 11:44:40 +0000 |
Chris Cannam |
Delete audio I/O objects in a fixed order
3.0-integration
|
Wed, 30 Nov 2016 11:01:39 +0000 |
Chris Cannam |
Bigger colour swatches for bigger fonts
3.0-integration
|
Wed, 30 Nov 2016 10:54:16 +0000 |
Chris Cannam |
Always accept wheel events
3.0-integration
|
Tue, 29 Nov 2016 17:09:07 +0000 |
Chris Cannam |
Another check to ensure sync error suppressed at eof
3.0-integration
|
Tue, 29 Nov 2016 16:45:53 +0000 |
Chris Cannam |
Merge from branch mp3-gapless
3.0-integration
|
Tue, 29 Nov 2016 16:45:29 +0000 |
Chris Cannam |
Stop reporting sync errors only when we really are at eof, i.e. after the input callback has been called again (previously we just tested whether we'd buffered up all the input, which of course we do in one go at the start)
mp3-gapless
|
Tue, 29 Nov 2016 14:35:27 +0000 |
Chris Cannam |
Test fixes
mp3-gapless
|
Tue, 29 Nov 2016 14:25:57 +0000 |
Chris Cannam |
Update m4a files to exports from CoreAudio, rather than FAAC; update tests accordingly, and add test for spurious data after end of decode
mp3-gapless
|
Tue, 29 Nov 2016 13:34:51 +0000 |
Chris Cannam |
Handle trimming the padding from end as well
mp3-gapless
|
Tue, 29 Nov 2016 12:06:49 +0000 |
Chris Cannam |
Refactor in CodedAudioFileReader in preparation for trimming at end
mp3-gapless
|
Tue, 29 Nov 2016 11:35:56 +0000 |
Chris Cannam |
Add gapless flag to MP3FileReader, and implement trimming the delay samples from the start (padding is not yet trimmed from end)
mp3-gapless
|
Tue, 29 Nov 2016 08:58:50 +0000 |
Chris Cannam |
Add test for last change to ColumnOp
3.0-integration
|
Mon, 28 Nov 2016 18:53:17 +0000 |
Chris Cannam |
Add header required when building with FFTW on Windows
3.0-integration
|
Mon, 28 Nov 2016 18:09:59 +0000 |
Chris Cannam |
Further fix to decision about when not to interpolate in ColumnOp::distribute
3.0-integration
|
Mon, 28 Nov 2016 14:41:52 +0000 |
Chris Cannam |
Subrepo merge
3.0-integration
|
Mon, 28 Nov 2016 14:40:45 +0000 |
Chris Cannam |
Interpolate always, when interpolation requested. Previous test failed to take into account varying bin height in log-scale modes, which meant interpolation might be necessary even when more bins than pixels.
3.0-integration
|
Fri, 25 Nov 2016 11:39:20 +0000 |
Chris Cannam |
Merge
3.0-integration
|
Fri, 25 Nov 2016 11:38:37 +0000 |
Chris Cannam |
Update svcore audio reader tests so as to check for truncated decode
3.0-integration
|
Fri, 25 Nov 2016 10:08:52 +0000 |
Chris Cannam |
Merge from branch subdivide-instants
3.0-integration
|
Fri, 25 Nov 2016 10:08:09 +0000 |
Chris Cannam |
Tidy up, with some convenient C++11isms
subdivide-instants
|
Fri, 25 Nov 2016 09:57:36 +0000 |
Chris Cannam |
Add Winnow as well
subdivide-instants
|
Fri, 25 Nov 2016 09:38:53 +0000 |
Chris Cannam |
Implement "Subdivide Selected Instants". Also add the relabel command to the history, which I previously forgot to do!
subdivide-instants
|
Thu, 24 Nov 2016 17:10:40 +0000 |
Chris Cannam |
Fixes to mp3 decode in subrepo. Filter out Xing/LAME info frames, rather than letting them go to the mp3 decoder as if they were audio frames, fixing the 1152-sample zero pad at start of some decoded mp3 files (distinct from decoder delay). Add MAD_BUFFER_GUARD padding at end of mp3 buffer, in order to ensure last frame is decoded successfully (otherwise the decoded audio is truncated). Both gleaned from madplay source code.
3.0-integration
|
Wed, 23 Nov 2016 10:39:45 +0000 |
Chris Cannam |
Fix various column edge cases
3.0-integration
|
Tue, 22 Nov 2016 16:41:17 +0000 |
Chris Cannam |
Ordered config -- avoid sub-builds clobbering one another
3.0-integration
|
Mon, 21 Nov 2016 15:33:13 +0000 |
Chris Cannam |
Merge subrepos
3.0-integration
|
Mon, 21 Nov 2016 15:32:15 +0000 |
Chris Cannam |
Merge from branch bqfft
3.0-integration
|
Mon, 21 Nov 2016 15:05:57 +0000 |
Chris Cannam |
Branch to use bqfft code and remove FFTapi
bqfft
|
Fri, 18 Nov 2016 23:30:37 +0000 |
Chris Cannam |
Subrepo update
3.0-integration
|
Fri, 18 Nov 2016 14:30:52 +0000 |
Chris Cannam |
Vamp SDK update
3.0-integration
|
Fri, 18 Nov 2016 12:53:21 +0000 |
Chris Cannam |
Fix fairly obscure mis-canonicalisation in RealTime (leading to non-canonical but still correct values)
3.0-integration
|
Thu, 17 Nov 2016 18:10:46 +0000 |
Chris Cannam |
Fix path in deploy script
3.0-integration
|
Thu, 17 Nov 2016 17:57:50 +0000 |
Chris Cannam |
Avoid building app bundles for helper executables
3.0-integration
|
Thu, 17 Nov 2016 17:47:29 +0000 |
Chris Cannam |
Use own scaling
3.0-integration
|
Thu, 17 Nov 2016 14:46:03 +0000 |
Chris Cannam |
Further column op tests and fixes
3.0-integration
|
Thu, 17 Nov 2016 14:33:20 +0000 |
Chris Cannam |
Tests and fixes for distribute(). Although this version of interpolated distribution passes these tests, it isn't right visually -- the expected values in the tests are offset. To be continued.
3.0-integration
|
Thu, 17 Nov 2016 11:56:54 +0000 |
Chris Cannam |
Start tests for ColumnOp (+ some resulting fixes)
3.0-integration
|
Wed, 16 Nov 2016 16:24:12 +0000 |
Chris Cannam |
Ah, this version should have been 2
3.0-integration
|
Wed, 16 Nov 2016 16:13:30 +0000 |
Chris Cannam |
Subrepo update
3.0-integration
|
Wed, 16 Nov 2016 16:12:42 +0000 |
Chris Cannam |
Debug output improvements, and make the checker actually attempt to call the descriptor function for known plugin types
3.0-integration
|
Tue, 15 Nov 2016 16:54:02 +0000 |
Chris Cannam |
Test fixes
3.0-integration
|
Tue, 15 Nov 2016 16:12:48 +0000 |
Chris Cannam |
RealTime fixes to comply with new, more demanding tests; also run same (failing) tests on Vamp SDK version
3.0-integration
|
Tue, 15 Nov 2016 09:12:58 +0000 |
Chris Cannam |
Run tests
3.0-integration
|
Mon, 14 Nov 2016 17:54:22 +0000 |
Chris Cannam |
Remove some no-longer-used project files
3.0-integration
|
Mon, 14 Nov 2016 17:53:16 +0000 |
Chris Cannam |
Rearrange svcore tests so they can all be built from the top level
3.0-integration
|
Mon, 14 Nov 2016 15:00:29 +0000 |
Chris Cannam |
Further RealTime test (currently failing)
3.0-integration
|
Mon, 14 Nov 2016 14:29:10 +0000 |
Chris Cannam |
Re-enable unit tests
3.0-integration
|
Thu, 10 Nov 2016 09:58:28 +0000 |
Chris Cannam |
More timings and cache hit counts
3.0-integration
|
Thu, 10 Nov 2016 09:23:05 +0000 |
Chris Cannam |
A note on cache hit findings
3.0-integration
|
Wed, 09 Nov 2016 18:08:40 +0000 |
Chris Cannam |
Print out cache hit/miss counts
3.0-integration
|
Tue, 08 Nov 2016 14:55:53 +0000 |
Chris Cannam |
Use peak cache at one zoom level lower (since it exists at that level already -- this is a >= vs > question) + make naming more uniform
3.0-integration
|
Sat, 05 Nov 2016 10:41:41 +0000 |
Chris Cannam |
Merge from branch piper
3.0-integration
|
Sat, 05 Nov 2016 10:40:22 +0000 |
Chris Cannam |
Avoid assigning model resolution of 0 to models coming from plugins that report weirdly high output rates (symptom: data did not show up in edit layer data dialog, as the row/frame conversion failed)
piper
|
Fri, 04 Nov 2016 16:44:59 +0000 |
Chris Cannam |
Fix omitted topmost bin
3.0-integration
|
Fri, 04 Nov 2016 16:32:41 +0000 |
Chris Cannam |
Fix forehead-slapping failure to use the right model when rendering 3d plot in peaks cache mode (i.e. when zoomed quite far out)
3.0-integration
|
Fri, 04 Nov 2016 16:01:37 +0000 |
Chris Cannam |
Ensure columns all have correct height when retrieved (to avoid e.g. empty columns because a feature extractor's start time was >0)
3.0-integration
|
Fri, 04 Nov 2016 14:57:03 +0000 |
Chris Cannam |
Merge from branch piper
3.0-integration
|
Fri, 04 Nov 2016 14:39:15 +0000 |
Chris Cannam |
Some updates to accommodate adaptation for Sonic Annotator
piper
|
Fri, 04 Nov 2016 10:54:00 +0000 |
Chris Cannam |
Update subrepos to default branches after merge
piper
|
Thu, 03 Nov 2016 16:42:47 +0000 |
Chris Cannam |
A bit more log info useful for win32/x64
piper
|
Thu, 03 Nov 2016 15:38:17 +0000 |
Chris Cannam |
Update to use listargs variant of Piper stuff (so that the plugin winnowing feature from the penultimate commit actually works)
piper
|
Thu, 03 Nov 2016 14:57:00 +0000 |
Chris Cannam |
Make SVDEBUG always write to a log file -- formerly this was disabled in NDEBUG builds. I think there's little use to that, it just means that we keep adding more cerr debug output because we aren't getting the log we need. And SVDEBUG logging is not usually used in tight loops, I don't think the performance overhead is too serious.
piper
|
Thu, 03 Nov 2016 14:14:09 +0000 |
Chris Cannam |
Use plugin scan results to inform the list requests issued to Piper servers
piper
|
Wed, 02 Nov 2016 14:35:17 +0000 |
Chris Cannam |
Merge
piper
|
Wed, 02 Nov 2016 14:34:41 +0000 |
Chris Cannam |
Subrepo state
piper
|
Tue, 01 Nov 2016 16:02:15 +0000 |
Chris Cannam |
Logging; use only first ("native") helper for non-Vamp plugins
piper
|
Tue, 01 Nov 2016 15:09:44 +0000 |
Chris Cannam |
More useful reporting output
piper
|
Tue, 01 Nov 2016 14:43:51 +0000 |
Chris Cannam |
Add omitted files, again!
piper
|
Tue, 01 Nov 2016 14:08:57 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
piper
|
Tue, 01 Nov 2016 14:06:47 +0000 |
Chris Cannam |
Support multiple plugin checker helpers, as for multiple piper servers
3.0-integration
|
Tue, 01 Nov 2016 12:09:05 +0000 |
Chris Cannam |
Support for multiple servers
3.0-integration
|
Fri, 28 Oct 2016 15:20:58 +0100 |
Chris Cannam |
Merge from branch piper
3.0-integration
|
Fri, 28 Oct 2016 15:19:12 +0100 |
Chris Cannam |
Merge from branch project-file-rework
piper
|
Fri, 28 Oct 2016 14:32:45 +0100 |
Chris Cannam |
Numerous Windows fixes in subrepos
project-file-rework
|
Fri, 28 Oct 2016 11:32:36 +0100 |
Chris Cannam |
Ensure plugin is deleted in same thread that created and used it
project-file-rework
|
Fri, 28 Oct 2016 11:32:22 +0100 |
Chris Cannam |
Don't -Werror here
project-file-rework
|
Fri, 28 Oct 2016 11:08:17 +0100 |
Chris Cannam |
Rename server to simple-server, and add some more description in usage
project-file-rework
|
Thu, 27 Oct 2016 16:14:49 +0100 |
Chris Cannam |
Win32 fixes in subrepos (inc binary modes for server)
project-file-rework
|
Thu, 27 Oct 2016 14:01:35 +0100 |
Chris Cannam |
Error handling
project-file-rework
|
Thu, 27 Oct 2016 13:42:21 +0100 |
Chris Cannam |
Build the converter too
project-file-rework
|
Thu, 27 Oct 2016 12:06:14 +0100 |
Chris Cannam |
Update Piper server invocation convention
project-file-rework
|
Thu, 27 Oct 2016 10:29:44 +0100 |
Chris Cannam |
More Windows build bits
project-file-rework
|
Wed, 26 Oct 2016 11:57:13 +0100 |
Chris Cannam |
Win64 build flags
project-file-rework
|
Tue, 25 Oct 2016 21:19:48 +0100 |
Chris Cannam |
Couple of overlooked defines
project-file-rework
|
Tue, 25 Oct 2016 21:10:48 +0100 |
Chris Cannam |
Tidier noconfig file
project-file-rework
|
Tue, 25 Oct 2016 21:06:38 +0100 |
Chris Cannam |
Fix maddening failure to start server with space in its path
project-file-rework
|
Tue, 25 Oct 2016 15:51:55 +0100 |
Chris Cannam |
Only if server not running
project-file-rework
|
Tue, 25 Oct 2016 15:51:24 +0100 |
Chris Cannam |
Don't need these frameworks for the server
project-file-rework
|
Tue, 25 Oct 2016 15:32:41 +0100 |
Chris Cannam |
Tidying
project-file-rework
|
Tue, 25 Oct 2016 15:29:01 +0100 |
Chris Cannam |
Minor build updates
project-file-rework
|
Tue, 25 Oct 2016 14:58:36 +0100 |
Chris Cannam |
OSX build updates
project-file-rework
|
Tue, 25 Oct 2016 14:48:56 +0100 |
Chris Cannam |
OSX build fixes and logic
project-file-rework
|
Tue, 25 Oct 2016 13:07:36 +0100 |
Chris Cannam |
Add basic noconfig.pri
project-file-rework
|
Tue, 25 Oct 2016 11:06:00 +0100 |
Chris Cannam |
Merge from branch piper
project-file-rework
|
Tue, 25 Oct 2016 11:02:03 +0100 |
Chris Cannam |
Merge
piper
|
Tue, 25 Oct 2016 10:53:12 +0100 |
Chris Cannam |
Add files that I forgot to track on Friday (sigh)
piper
|
Mon, 24 Oct 2016 17:54:50 +0100 |
Chris Cannam |
Merge in subrepo
project-file-rework
|
Mon, 24 Oct 2016 17:53:33 +0100 |
Chris Cannam |
Cut down vastly on the number of config.pri files and places where their contents has to be effectively duplicated without them
project-file-rework
|
Mon, 24 Oct 2016 10:52:51 +0100 |
Chris Cannam |
Server project file
piper
|
Fri, 21 Oct 2016 16:24:30 +0100 |
Chris Cannam |
Error reporting for Piper server startup
piper
|
Fri, 21 Oct 2016 14:51:22 +0100 |
Chris Cannam |
Fixes to choice of plugin factory
piper
|
Fri, 21 Oct 2016 14:40:48 +0100 |
Chris Cannam |
Add out-of-process execution to prefs dialog
piper
|
Fri, 21 Oct 2016 11:59:14 +0100 |
Chris Cannam |
Default to using Piper
piper
|
Fri, 21 Oct 2016 11:49:27 +0100 |
Chris Cannam |
Restore native-Vamp factory and make the choice between Piper and Native a preference
piper
|
Thu, 20 Oct 2016 18:35:09 +0100 |
Chris Cannam |
Use .cpp file instead
piper
|
Thu, 20 Oct 2016 14:07:21 +0100 |
Chris Cannam |
Avoid instantiating all plugins on startup, + build fixes
piper
|
Thu, 20 Oct 2016 11:21:44 +0100 |
Chris Cannam |
Update subrepos
3.0-integration
|
Thu, 20 Oct 2016 11:21:01 +0100 |
Chris Cannam |
Update subrepos
piper
|
Thu, 20 Oct 2016 11:19:34 +0100 |
Chris Cannam |
Merge from branch 3.0-integration
piper
|
Thu, 20 Oct 2016 11:16:55 +0100 |
Chris Cannam |
Merge from branch msvc2015_64
3.0-integration
|
Wed, 19 Oct 2016 17:33:32 +0100 |
Chris Cannam |
Further MSVC build stuff. Committing this as-is because it's building and running now, but there's a lot to tidy up.
msvc2015_64
|
Wed, 19 Oct 2016 09:11:51 +0100 |
Chris Cannam |
Tidy and re-fix for Linux
msvc2015_64
|
Tue, 18 Oct 2016 15:59:42 +0100 |
Chris Cannam |
MSVC build fixes, and show 32/64-bit in About
msvc2015_64
|
Tue, 18 Oct 2016 14:03:35 +0100 |
Chris Cannam |
MatrixFile is no longer used
3.0-integration
|
Mon, 17 Oct 2016 18:56:28 +0100 |
Chris Cannam |
Update subrepo
piper
|
Mon, 17 Oct 2016 16:41:07 +0100 |
Chris Cannam |
Update subrepo
piper
|
Mon, 17 Oct 2016 16:39:36 +0100 |
Chris Cannam |
Fix compiler warnings
piper
|
Mon, 17 Oct 2016 14:55:05 +0100 |
Chris Cannam |
Restore plugin categories
piper
|
Mon, 17 Oct 2016 14:28:43 +0100 |
Chris Cannam |
More cautious locking on sparse model modification
piper
|
Mon, 17 Oct 2016 14:18:23 +0100 |
Chris Cannam |
Pull out model creation into the transformer thread run(), so that all communications with the plugin server happen on a single thread. Then make the model accessor wait for them to be created (which still happens right at the start of processing) before returning.
piper
|
Fri, 14 Oct 2016 16:23:04 +0100 |
Chris Cannam |
Try AutoPlugin; also not very successful
piper
|
Fri, 14 Oct 2016 14:34:25 +0100 |
Chris Cannam |
Add piper-cpp stuff, experimentally
piper
|
Tue, 20 Sep 2016 09:28:03 +0100 |
Chris Cannam |
Update subrepos (bookkeeping only really)
3.0-integration
|
Mon, 15 Aug 2016 16:45:17 +0100 |
Chris Cannam |
Patch from Fab Nicol to fix a problem with Recent Files menu:
3.0-integration
|
Mon, 15 Aug 2016 16:42:19 +0100 |
Chris Cannam |
Avoid warning
3.0-integration
|
Fri, 05 Aug 2016 17:48:52 +0100 |
Chris Cannam |
Introduce labels in RangeMapper and use them in AudioDial, though only for tooltip at present. Make use of this for spectrogram magic -81dB/-Inf threshold. Also introduce static strings for inf/pi and use where appropriate.
3.0-integration
|
Fri, 05 Aug 2016 15:05:02 +0100 |
Chris Cannam |
Merge work on unified spectrogram and colour 3d plot caching renderer
3.0-integration
|
Fri, 05 Aug 2016 14:54:24 +0100 |
Chris Cannam |
Since 1d317e717fe4 we no longer want to fft scale in hybrid mode. (This might also restore compatibility with Tony and prior SV save sessions -- test this.)
spectrogram-minor-refactor
|
Fri, 05 Aug 2016 14:36:28 +0100 |
Chris Cannam |
Make text labels on vertical scale ticks visible
spectrogram-minor-refactor
|
Fri, 05 Aug 2016 14:31:16 +0100 |
Chris Cannam |
Fixes to phase display and colour scale for it; tidy up some debug output
spectrogram-minor-refactor
|
Fri, 05 Aug 2016 14:00:58 +0100 |
Chris Cannam |
Pull out paintDetailedScale
spectrogram-minor-refactor
|
Fri, 05 Aug 2016 13:48:14 +0100 |
Chris Cannam |
Minor tidy, + go back to opaque-only spectrogram as intended
spectrogram-minor-refactor
|
Fri, 05 Aug 2016 12:47:10 +0100 |
Chris Cannam |
Restore illuminateLocalFeatures in spectrogram
spectrogram-minor-refactor
|
Thu, 04 Aug 2016 17:29:33 +0100 |
Chris Cannam |
Reconnect double-click region select in spectrogram
spectrogram-minor-refactor
|
Thu, 04 Aug 2016 14:02:56 +0100 |
Chris Cannam |
Restore phase display
spectrogram-minor-refactor
|
Thu, 04 Aug 2016 11:26:11 +0100 |
Chris Cannam |
Re-implement dB^2 (log-power) spectrogram setting
spectrogram-minor-refactor
|
Wed, 03 Aug 2016 16:16:23 +0100 |
Chris Cannam |
Re-enable (little-used) normalise-visible-range option in spectrogram layer
spectrogram-minor-refactor
|
Wed, 03 Aug 2016 14:20:27 +0100 |
Chris Cannam |
Use a count of bins rather than min and max bins (because the name maxbin tells us nothing about whether the range is inclusive or not)
spectrogram-minor-refactor
|
Tue, 02 Aug 2016 18:32:19 +0100 |
Chris Cannam |
Another small tidy
spectrogram-minor-refactor
|
Tue, 02 Aug 2016 11:42:24 +0100 |
Chris Cannam |
Fix vertical zoom/scroll in colour 3d plot layer
spectrogram-minor-refactor
|
Tue, 02 Aug 2016 11:14:59 +0100 |
Chris Cannam |
Minor tidy
spectrogram-minor-refactor
|
Tue, 02 Aug 2016 09:58:41 +0100 |
Chris Cannam |
Sensible vertical scale and hybrid normalisation range in colour 3d plot
spectrogram-minor-refactor
|
Tue, 02 Aug 2016 09:20:16 +0100 |
Chris Cannam |
Minor tidy
spectrogram-minor-refactor
|
Tue, 02 Aug 2016 09:09:58 +0100 |
Chris Cannam |
A threshold fix
spectrogram-minor-refactor
|
Mon, 01 Aug 2016 16:25:06 +0100 |
Chris Cannam |
Float/double conversion fixes
spectrogram-minor-refactor
|
Mon, 01 Aug 2016 16:21:01 +0100 |
Chris Cannam |
Fix threshold in spectrogram -- it wasn't working in the last release.
spectrogram-minor-refactor
|
Mon, 01 Aug 2016 15:06:16 +0100 |
Chris Cannam |
Scale range matching
spectrogram-minor-refactor
|
Mon, 01 Aug 2016 11:31:53 +0100 |
Chris Cannam |
Some notes on gain
spectrogram-minor-refactor
|
Fri, 22 Jul 2016 14:42:36 +0100 |
Chris Cannam |
Some tidying
spectrogram-minor-refactor
|
Fri, 22 Jul 2016 13:56:24 +0100 |
Chris Cannam |
Fixes and debug output for mag range calculations
spectrogram-minor-refactor
|
Fri, 22 Jul 2016 12:17:55 +0100 |
Chris Cannam |
Wiring through the magnitude range updates
spectrogram-minor-refactor
|
Wed, 20 Jul 2016 13:40:23 +0100 |
Chris Cannam |
Toward updating mag cache
spectrogram-minor-refactor
|
Wed, 20 Jul 2016 08:42:04 +0100 |
Chris Cannam |
Inch toward using the mag cache (currently will crash with debug exception)
spectrogram-minor-refactor
|
Wed, 20 Jul 2016 08:30:20 +0100 |
Chris Cannam |
Introduce ScrollableMagRangeCache, plus some tidying etc
spectrogram-minor-refactor
|
Tue, 19 Jul 2016 17:28:03 +0100 |
Chris Cannam |
Fix translucent mode for spectrogram
spectrogram-minor-refactor
|
Tue, 19 Jul 2016 15:08:22 +0100 |
Chris Cannam |
Wire up invertVertical
spectrogram-minor-refactor
|
Tue, 19 Jul 2016 15:02:44 +0100 |
Chris Cannam |
Re-enable a couple more features
spectrogram-minor-refactor
|
Tue, 19 Jul 2016 14:50:39 +0100 |
Chris Cannam |
Tidy
spectrogram-minor-refactor
|
Tue, 19 Jul 2016 14:49:46 +0100 |
Chris Cannam |
Consts and willRenderOpaque
spectrogram-minor-refactor
|
Tue, 19 Jul 2016 10:12:30 +0100 |
Chris Cannam |
Colourmap rotation (inelegantly)
spectrogram-minor-refactor
|
Tue, 19 Jul 2016 09:36:29 +0100 |
Chris Cannam |
Subrepo update
spectrogram-minor-refactor
|
Tue, 19 Jul 2016 08:55:13 +0100 |
Chris Cannam |
Make VerticalBinLayer an actual Layer (via SliceableLayer)
spectrogram-minor-refactor
|
Fri, 15 Jul 2016 15:20:39 +0100 |
Chris Cannam |
Merge
spectrogram-minor-refactor
|
Fri, 15 Jul 2016 15:18:31 +0100 |
Chris Cannam |
Update dataquay subrepo for 0.9.1
last_v2.5_on_default_branch
|
Mon, 18 Jul 2016 15:37:15 +0100 |
Chris Cannam |
Start introducing translucent renderer
spectrogram-minor-refactor
|
Thu, 14 Jul 2016 17:14:30 +0100 |
Chris Cannam |
Fix failure to reinitialise m_peakCache
spectrogram-minor-refactor
|
Thu, 14 Jul 2016 17:12:08 +0100 |
Chris Cannam |
Remove almost all of the "old" paint logic from Colour3DPlotLayer
spectrogram-minor-refactor
|
Thu, 14 Jul 2016 17:03:40 +0100 |
Chris Cannam |
Remove all of the "old" paint logic from SpectrogramLayer, even where it hasn't been completely replaced yet
spectrogram-minor-refactor
|
Thu, 14 Jul 2016 16:52:16 +0100 |
Chris Cannam |
Convert ColourScaleType into an enum class
spectrogram-minor-refactor
|
Thu, 14 Jul 2016 16:12:05 +0100 |
Chris Cannam |
Convert ColumnNormalization to an enum class, and separate out normalize-visible
spectrogram-minor-refactor
|
Thu, 14 Jul 2016 15:13:37 +0100 |
Chris Cannam |
Turn BinDisplay and BinScale into enum classes
spectrogram-minor-refactor
|
Thu, 14 Jul 2016 14:49:04 +0100 |
Chris Cannam |
Fix potential crash in Dense3dModelPeakCache owing to combination of wrong width calculation and wrong handling of width overrun
spectrogram-minor-refactor
|
Wed, 13 Jul 2016 13:44:11 +0100 |
Chris Cannam |
Delete renderers
spectrogram-minor-refactor
|
Wed, 13 Jul 2016 13:30:39 +0100 |
Chris Cannam |
Begin using renderer in colour 3d plot layer
spectrogram-minor-refactor
|
Wed, 13 Jul 2016 13:06:28 +0100 |
Chris Cannam |
Create, but don't yet use, a renderer in the colour 3d plot layer
spectrogram-minor-refactor
|
Wed, 13 Jul 2016 10:00:21 +0100 |
Chris Cannam |
Switch in "standard" colour scale, bin scale, normalisation -- not quite handled elegantly or correctly yet
spectrogram-minor-refactor
|
Mon, 11 Jul 2016 17:19:36 +0100 |
Chris Cannam |
Minor build fix
spectrogram-minor-refactor
|
Mon, 11 Jul 2016 16:03:39 +0100 |
Chris Cannam |
Introduce peak frequency rendering (basics of)
spectrogram-minor-refactor
|
Mon, 11 Jul 2016 14:37:03 +0100 |
Chris Cannam |
Far more pragmatic update strategy
spectrogram-minor-refactor
|
Mon, 11 Jul 2016 10:38:23 +0100 |
Chris Cannam |
Fix draw buffer sizing problem in scaled rendering
spectrogram-minor-refactor
|
Thu, 07 Jul 2016 19:18:31 +0100 |
Chris Cannam |
Split out cache rendering functions and some fixes to calculations
spectrogram-minor-refactor
|
Thu, 07 Jul 2016 12:39:56 +0100 |
Chris Cannam |
Colour scales (partly)
spectrogram-minor-refactor
|
Thu, 07 Jul 2016 11:24:28 +0100 |
Chris Cannam |
Time-constrained rendering
spectrogram-minor-refactor
|
Tue, 05 Jul 2016 17:48:26 +0100 |
Chris Cannam |
Cut over to using the renderer (though it's very incomplete) and fix some cache problems and pointer lifetime misunderstandings
spectrogram-minor-refactor
|
Tue, 05 Jul 2016 12:20:56 +0100 |
Chris Cannam |
Start to introduce renderer objects
spectrogram-minor-refactor
|
Tue, 05 Jul 2016 08:58:28 +0100 |
Chris Cannam |
One FFT model per spectrogram (again!) - but we do still need a magnitude range per view, as views could be showing different regions
spectrogram-minor-refactor
|
Sat, 02 Jul 2016 12:56:07 +0100 |
Chris Cannam |
One FFT size method, no member for it
spectrogram-minor-refactor
|
Fri, 01 Jul 2016 18:30:42 +0100 |
Chris Cannam |
Simplify the oversampling/zero-padding logic. FFT model selection no longer depends on the view.
spectrogram-minor-refactor
|
Fri, 01 Jul 2016 17:54:31 +0100 |
Chris Cannam |
Add VerticalBinLayer to SpectrogramLayer
spectrogram-minor-refactor
|
Fri, 01 Jul 2016 11:37:46 +0100 |
Chris Cannam |
Scale and copy
spectrogram-minor-refactor
|
Fri, 01 Jul 2016 11:21:09 +0100 |
Chris Cannam |
Start introducing render code
spectrogram-minor-refactor
|
Fri, 01 Jul 2016 09:55:48 +0100 |
Chris Cannam |
VerticalBinLayer for vertical mapping abstraction. Not totally sure about this
spectrogram-minor-refactor
|
Thu, 30 Jun 2016 18:21:11 +0100 |
Chris Cannam |
Comments
spectrogram-minor-refactor
|
Thu, 30 Jun 2016 16:28:32 +0100 |
Chris Cannam |
Minor adjustments
spectrogram-minor-refactor
|
Thu, 30 Jun 2016 15:46:14 +0100 |
Chris Cannam |
More filling in render & cache code
spectrogram-minor-refactor
|
Thu, 30 Jun 2016 12:40:22 +0100 |
Chris Cannam |
Move drawVisibleText to PaintAssistant
spectrogram-minor-refactor
|
Thu, 30 Jun 2016 10:59:11 +0100 |
Chris Cannam |
Move LayerGeometryProvider from view to layer
spectrogram-minor-refactor
|
Thu, 30 Jun 2016 10:36:52 +0100 |
Chris Cannam |
Two functions, rather than one with a boolean arg
spectrogram-minor-refactor
|
Wed, 29 Jun 2016 15:13:54 +0100 |
Chris Cannam |
Another tiny bit
spectrogram-minor-refactor
|
Wed, 29 Jun 2016 14:04:57 +0100 |
Chris Cannam |
Pull out render timer
spectrogram-minor-refactor
|
Wed, 29 Jun 2016 11:53:00 +0100 |
Chris Cannam |
More renderer stubbing
spectrogram-minor-refactor
|
Mon, 27 Jun 2016 16:01:42 +0100 |
Chris Cannam |
Comments
spectrogram-minor-refactor
|
Thu, 23 Jun 2016 17:07:21 +0100 |
Chris Cannam |
Start stubbing Colour3DPlotRenderer
spectrogram-minor-refactor
|
Thu, 23 Jun 2016 14:51:10 +0100 |
Chris Cannam |
Use a params structure
spectrogram-minor-refactor
|
Thu, 23 Jun 2016 14:43:23 +0100 |
Chris Cannam |
ColourScale class, comments, naming
spectrogram-minor-refactor
|
Thu, 23 Jun 2016 10:57:22 +0100 |
Chris Cannam |
Comment
spectrogram-minor-refactor
|
Thu, 23 Jun 2016 10:51:45 +0100 |
Chris Cannam |
Comments
spectrogram-minor-refactor
|
Thu, 23 Jun 2016 08:46:20 +0100 |
Chris Cannam |
Fix possible crash when scrolling to end
spectrogram-minor-refactor
|
Mon, 20 Jun 2016 12:00:32 +0100 |
Chris Cannam |
Extend column logic to peak frequency display as well, and correct some scopes according to whether values are per source column or per target pixel
spectrogram-minor-refactor
|
Mon, 20 Jun 2016 11:30:15 +0100 |
Chris Cannam |
Pull out column ops into ColumnOp
spectrogram-minor-refactor
|
Fri, 17 Jun 2016 10:19:55 +0100 |
Chris Cannam |
A more sensible order for column operations
spectrogram-minor-refactor
|
Wed, 15 Jun 2016 14:43:51 +0100 |
Chris Cannam |
Don't need these
spectrogram-minor-refactor
|
Wed, 15 Jun 2016 09:46:20 +0100 |
Chris Cannam |
Replace old logic with calls to new functions; basic refactor part A done, the code now compiles again
spectrogram-minor-refactor
|
Wed, 15 Jun 2016 08:52:07 +0100 |
Chris Cannam |
A couple more helper functions
spectrogram-minor-refactor
|
Mon, 13 Jun 2016 16:17:44 +0100 |
Chris Cannam |
Mid-refactor to pull out the bulk of paintDrawBuffer into chunks
spectrogram-minor-refactor
|
Mon, 13 Jun 2016 12:46:36 +0100 |
Chris Cannam |
Merge from default branch
spectrogram-minor-refactor
|
Mon, 13 Jun 2016 12:28:13 +0100 |
Chris Cannam |
Subrepo update
3.0-integration
|
Thu, 26 May 2016 11:21:55 +0100 |
Chris Cannam |
Don't paint if model has zero width
3.0-integration
|
Thu, 05 May 2016 15:05:56 +0100 |
Chris Cannam |
Make archiver check & complain if the appropriate docs page returns a 404
3.0-integration
|
Wed, 04 May 2016 10:27:26 +0100 |
Chris Cannam |
Subrepo update
3.0-integration
|
Tue, 03 May 2016 15:42:28 +0100 |
Chris Cannam |
Win32 build fix
3.0-integration
|
Wed, 27 Apr 2016 11:34:08 +0100 |
Chris Cannam |
Update Qt copyright note
3.0-integration
|
Wed, 27 Apr 2016 11:27:34 +0100 |
Chris Cannam |
Version on this branch will be 3.0
3.0-integration
|
Wed, 27 Apr 2016 11:26:49 +0100 |
Chris Cannam |
Deploy plugin checker helper; update deployment for current Qt
3.0-integration
|
Wed, 27 Apr 2016 11:04:32 +0100 |
Chris Cannam |
OSX build fixes
3.0-integration
|
Fri, 22 Apr 2016 11:15:46 +0100 |
Chris Cannam |
Update subrepos
3.0-integration
|
Wed, 20 Apr 2016 12:06:28 +0100 |
Chris Cannam |
Merge branches 3.0-integration and imaf_enc to 3.0-plus-imaf
3.0-plus-imaf
|
Fri, 15 Apr 2016 16:26:15 +0100 |
Chris Cannam |
Merge from branch pluginscan
3.0-integration
|
Fri, 15 Apr 2016 16:13:06 +0100 |
Chris Cannam |
Check for plugin scan helper checker helper program in suitable directory, & tidy up warning messages somewhat
pluginscan
|
Thu, 14 Apr 2016 16:53:03 +0100 |
Chris Cannam |
Update checker code layout
pluginscan
|
Thu, 14 Apr 2016 14:23:48 +0100 |
Chris Cannam |
Make this warning a #pragma message, as we don't want it to make compilation fail with -Werror set
pluginscan
|
Thu, 14 Apr 2016 14:03:18 +0100 |
Chris Cannam |
Make use of, and warn for, the plugin checker for all types of plugin. Haven't yet resolved the question of how to install and find it.
pluginscan
|
Thu, 14 Apr 2016 12:12:04 +0100 |
Chris Cannam |
First cut running (but not yet using output of, or recovering from errors in) the plugin checker at startup
pluginscan
|
Fri, 18 Mar 2016 14:26:06 +0000 |
Chris Cannam |
Remove Vamp SDK from dependency builds for Windows, as for OSX
3.0-integration
|
Fri, 18 Mar 2016 14:25:05 +0000 |
Chris Cannam |
Start including Vamp SDK into main build, as we do with Sonic Annotator
3.0-integration
|
Fri, 04 Mar 2016 13:04:39 +0000 |
Chris Cannam |
Update subrepo
|
Fri, 04 Mar 2016 12:40:18 +0000 |
Chris Cannam |
Merge from default!
3.0-integration
|
Fri, 04 Mar 2016 12:39:45 +0000 |
Chris Cannam |
Merge from default branch in subrepos
3.0-integration
|
Fri, 04 Mar 2016 12:30:38 +0000 |
Chris Cannam |
Merge in subrepo
|
Wed, 02 Mar 2016 16:16:43 +0000 |
Chris Cannam |
Merge in subrepo
3.0-integration
|
Tue, 09 Feb 2016 10:59:36 +0000 |
Chris Cannam |
Make ViewProxy objects share the ids of their Views; fixes incorrect colour scale drawing
3.0-integration
|
Tue, 09 Feb 2016 10:21:30 +0000 |
Chris Cannam |
Clumsily avoid segfault on pulse shutdown
3.0-integration
|
Thu, 04 Feb 2016 11:23:03 +0000 |
Chris Cannam |
Update i18n files
3.0-integration
|
Thu, 04 Feb 2016 11:22:30 +0000 |
Chris Cannam |
Merge from default branch
3.0-integration
|
Thu, 04 Feb 2016 11:20:37 +0000 |
Chris Cannam |
Merge subrepos
3.0-integration
|
Thu, 04 Feb 2016 11:12:36 +0000 |
Chris Cannam |
Merge from branch "spectrogram-minor-refactor"
3.0-integration
|
Wed, 03 Feb 2016 16:51:37 +0000 |
Chris Cannam |
Truncate edges when about to paint beyond limits of cache
spectrogram-minor-refactor
|
Tue, 02 Feb 2016 16:00:31 +0000 |
Chris Cannam |
Don't use partial paints when zoomed in far enough to have boundary alignment concerns. (But boundary calculations are still wrong, leading to a logic error exception.)
spectrogram-minor-refactor
|
Tue, 02 Feb 2016 15:34:39 +0000 |
Chris Cannam |
Comment
spectrogram-minor-refactor
|
Tue, 02 Feb 2016 15:32:57 +0000 |
Chris Cannam |
Timing tweaks to reduce the number of repaints
spectrogram-minor-refactor
|
Tue, 02 Feb 2016 14:28:00 +0000 |
Chris Cannam |
Fix cache validity boundary condition
spectrogram-minor-refactor
|
Tue, 02 Feb 2016 10:44:07 +0000 |
Chris Cannam |
*Really* add overlooked file!
spectrogram-minor-refactor
|
Tue, 02 Feb 2016 10:39:39 +0000 |
Chris Cannam |
Be a bit more flexible about which symbol to accept in resampler selection
spectrogram-minor-refactor
|
Tue, 02 Feb 2016 10:31:04 +0000 |
Chris Cannam |
Revert last commit (wrong branch)
|
Tue, 02 Feb 2016 10:29:10 +0000 |
Chris Cannam |
Add overlooked file!
|
Mon, 01 Feb 2016 09:16:33 +0000 |
Chris Cannam |
Updated Czech localisation file from Pavel Fric
|
Sat, 30 Jan 2016 12:09:18 +0000 |
Chris Cannam |
Update subrepo
|
Sat, 30 Jan 2016 12:05:14 +0000 |
Chris Cannam |
Update acinclude files to look for qt5-qmake as well as qmake-qt5
|
Fri, 29 Jan 2016 18:51:05 +0000 |
Chris Cannam |
Further fixes to the scrollable cache logic
spectrogram-minor-refactor
|
Fri, 29 Jan 2016 15:08:01 +0000 |
Chris Cannam |
Start refactoring out the spectrogram image cache
spectrogram-minor-refactor
|
Wed, 27 Jan 2016 19:27:11 +0000 |
Chris Cannam |
Subrepo update
spectrogram-minor-refactor
|
Wed, 27 Jan 2016 19:26:41 +0000 |
Chris Cannam |
build fix
spectrogram-minor-refactor
|
Wed, 27 Jan 2016 14:11:38 +0000 |
Chris Cannam |
OS/X updates
spectrogram-minor-refactor
|
Wed, 27 Jan 2016 11:10:49 +0000 |
Chris Cannam |
Fix calculation of repaint area when we haven't scrolled but cache is not complete
spectrogram-minor-refactor
|
Tue, 26 Jan 2016 17:21:46 +0000 |
Chris Cannam |
Start repainting from the middle -- but this is quite unreliable
spectrogram-minor-refactor
|
Tue, 26 Jan 2016 14:44:26 +0000 |
Chris Cannam |
Fix return value from paintDrawBuffer in rightToLeft case; propagate timing change to PeakFrequencies version as well
spectrogram-minor-refactor
|
Tue, 26 Jan 2016 13:19:53 +0000 |
Chris Cannam |
Draw right-to-left when adjoining an existing cache valid area on the right
spectrogram-minor-refactor
|
Mon, 25 Jan 2016 16:16:21 +0000 |
Chris Cannam |
Make paint method do its own timing and abandon if it's taking too long (still needs some work on queueing correct repaints of the remainder)
spectrogram-minor-refactor
|
Mon, 25 Jan 2016 15:52:26 +0000 |
Chris Cannam |
Rearrange cache update calculations so as to use the actual painted width returned by paint functions (though they only ever return the same width as requested, at this point)
spectrogram-minor-refactor
|
Fri, 22 Jan 2016 18:12:41 +0000 |
Chris Cannam |
Avoid reusing a large paint width if the zoom level has changed (in case it has changed dramatically, as for example when the user hits the F key). Also some tidying and adjustment to timing stuff
3.0-integration
|
Fri, 22 Jan 2016 17:08:02 +0000 |
Chris Cannam |
Tidy a bit
3.0-integration
|
Fri, 22 Jan 2016 15:17:30 +0000 |
Chris Cannam |
Subrepos
3.0-integration
|
Fri, 22 Jan 2016 13:39:45 +0000 |
Chris Cannam |
Convert 3d model column type from QVector to std::vector; replace another user of ResizeableBitset
3.0-integration
|
Fri, 22 Jan 2016 13:02:00 +0000 |
Chris Cannam |
Subrepos
3.0-integration
|
Fri, 22 Jan 2016 10:20:39 +0000 |
Chris Cannam |
Subrepos
3.0-integration
|
Thu, 21 Jan 2016 18:03:57 +0000 |
Chris Cannam |
Merge
3.0-integration
|
Thu, 10 Dec 2015 10:09:39 +0000 |
Chris Cannam |
Subrepo update
3.0-integration
|
Thu, 21 Jan 2016 15:23:47 +0000 |
Chris Cannam |
Mutex fix in bqaudioio to avoid delay in seeking during playback
3.0-integration
|
Thu, 21 Jan 2016 09:51:14 +0000 |
Chris Cannam |
Update translations
3.0-integration
|