Mon, 06 Feb 2017 09:18:55 +0000 |
Chris Cannam |
Subrepo update
|
Tue, 31 Jan 2017 11:13:20 +0000 |
Chris Cannam |
Handle exceptions raised during plugin processing (as opposed to on init/configure, which were already handled)
|
Wed, 01 Feb 2017 21:03:34 +0000 |
Chris Cannam |
Subrepo update
|
Fri, 27 Jan 2017 13:19:21 +0000 |
Chris Cannam |
More tweaks to when to render from the middle
|
Fri, 27 Jan 2017 11:57:49 +0000 |
Chris Cannam |
Looks like we can be a bit more relaxed here
|
Fri, 27 Jan 2017 11:39:42 +0000 |
Chris Cannam |
Wire up normalise-visible-area mode in colour 3d plot
|
Thu, 26 Jan 2017 21:20:06 +0000 |
Chris Cannam |
Various rendering adjustments for layers in svgui
|
Thu, 26 Jan 2017 14:11:20 +0000 |
Chris Cannam |
Reduce amount of copying in FFTModel
|
Thu, 26 Jan 2017 12:04:03 +0000 |
Chris Cannam |
Randomise start offset for partial paints, it looks (I think) a little better
|
Thu, 26 Jan 2017 11:55:11 +0000 |
Chris Cannam |
Measure time taken to render per pixel, and use the time last time around to decide whether to be time constrained this time around
|
Thu, 26 Jan 2017 10:41:50 +0000 |
Chris Cannam |
Fix #1781 Running CQ Chromagram spits out stacks of "bin index out of range" warnings
|
Sat, 21 Jan 2017 12:26:33 +0000 |
Chris Cannam |
I think that switch to a git subrepo was a mistake. Let's go back to the ssw mirror.
|
Fri, 20 Jan 2017 22:26:35 +0000 |
Chris Cannam |
Update piper-cpp subrepo
|
Fri, 20 Jan 2017 18:05:41 +0000 |
Chris Cannam |
Update piper-cpp to github repo, and adjust build for revised layout in it
|
Thu, 19 Jan 2017 11:01:41 +0000 |
Chris Cannam |
Fix absurd typo that was preventing transforms from running at all!
|
Thu, 19 Jan 2017 10:50:04 +0000 |
Chris Cannam |
Report on failures that happen while configuring a transform
|
Thu, 19 Jan 2017 09:57:58 +0000 |
Chris Cannam |
Allow the completeness checker to report failure (invalid message) as well as incompleteness
|
Wed, 18 Jan 2017 14:53:07 +0000 |
Chris Cannam |
Minor debug bit
|
Wed, 18 Jan 2017 14:22:40 +0000 |
Chris Cannam |
Fix hang when trying to run transform for which the plugin refuses to initialise at all
|
Mon, 16 Jan 2017 14:31:23 +0000 |
Chris Cannam |
Fix compiler warning
|
Mon, 16 Jan 2017 10:00:19 +0000 |
Chris Cannam |
Fix incorrect call to getColumn() that broke the peak-frequency spectrogram and close zoom levels of the colour 3d plot
|
Fri, 13 Jan 2017 21:19:42 +0000 |
Chris Cannam |
With updated bqvec, shouldn't need any allocator hints
|
Fri, 13 Jan 2017 15:44:39 +0000 |
Chris Cannam |
Debug toward tracking down strange peak-frequency spectrogram update problem
|
Fri, 13 Jan 2017 15:37:07 +0000 |
Chris Cannam |
Make getPreferredPeakCache check the render mode itself
|
Fri, 13 Jan 2017 13:12:37 +0000 |
Chris Cannam |
Fix spurious test failure in 32-bit build
|
Fri, 13 Jan 2017 10:30:06 +0000 |
Chris Cannam |
Merge in subrepos
|
Fri, 13 Jan 2017 10:22:04 +0000 |
Chris Cannam |
Fix memory leak of cache pixmaps in View
|
Thu, 12 Jan 2017 17:29:59 +0000 |
Chris Cannam |
Fix (I think) crash on exit on Windows having loaded an mp3
|
Thu, 12 Jan 2017 09:02:28 +0000 |
Chris Cannam |
Update Piper server to suspend stdout between responses; fixes hang on startup with certain Vamp plugins
|
Wed, 11 Jan 2017 17:48:21 +0000 |
Chris Cannam |
Complete that fix for the record target
|
Wed, 11 Jan 2017 17:46:37 +0000 |
Chris Cannam |
Fix flickery level meters
|
Tue, 10 Jan 2017 17:18:48 +0000 |
Chris Cannam |
Ah, of course I was using the wrong variable here
|
Tue, 10 Jan 2017 17:04:23 +0000 |
Chris Cannam |
Subrepo update
|
Tue, 10 Jan 2017 16:56:48 +0000 |
Chris Cannam |
Fix compiler warning, remove some debug out
|
Tue, 10 Jan 2017 14:18:34 +0000 |
Chris Cannam |
When importing CSV, if the first line doesn't have a separator, continue to leave the separator indeterminate until we arrive at a line that does. Fixes inability to load correctly CSV files in which some lines have more columns than others
3.0-integration
|
Tue, 10 Jan 2017 11:28:35 +0000 |
Chris Cannam |
Update PortAudio build for Win64
3.0-integration
|
Tue, 10 Jan 2017 11:08:14 +0000 |
Chris Cannam |
Win32 fixes
3.0-integration
|
Tue, 10 Jan 2017 11:06:20 +0000 |
Chris Cannam |
Some platforms don't use native Ogg/Vorbis libraries
3.0-integration
|
Tue, 10 Jan 2017 10:58:25 +0000 |
Chris Cannam |
Use W64 instead of WAV for decoded files; use Ogg reader in preference to WAV one for Ogg files (WAV reader works, via libsndfile, but doesn't load metadata); fix Ogg reader to use QFile open instead of non-Win32-compatible API; add more encoder tests, audio writer test, midi reader test
3.0-integration
|
Mon, 09 Jan 2017 18:51:42 +0000 |
Chris Cannam |
Remove unneeded debug
3.0-integration
|
Mon, 09 Jan 2017 16:41:45 +0000 |
Chris Cannam |
Fix a strictly-incorrect #if guard
3.0-integration
|
Mon, 09 Jan 2017 16:31:58 +0000 |
Chris Cannam |
Fix inadequate #if guard for non-gcc builds
3.0-integration
|
Mon, 09 Jan 2017 14:03:10 +0000 |
Chris Cannam |
Further win32 build updates
3.0-integration
|
Mon, 09 Jan 2017 13:51:39 +0000 |
Chris Cannam |
Further win32 build updates
3.0-integration
|
Mon, 09 Jan 2017 11:53:06 +0000 |
Chris Cannam |
Fixes and updates for 32-bit Windows build
3.0-integration
|
Mon, 09 Jan 2017 10:18:47 +0000 |
Chris Cannam |
Doc updates
3.0-integration
|
Mon, 09 Jan 2017 10:14:59 +0000 |
Chris Cannam |
Add checker README; rename plugin-checker-helper binary (back) to vamp-plugin-load-checker -- I decided it was more useful to have a distinctive name for the installed binary than it was important to show that it was plugin-agnostic
3.0-integration
|
Sun, 08 Jan 2017 16:10:28 +0000 |
Chris Cannam |
Update checker with version printout
3.0-integration
|
Fri, 06 Jan 2017 21:38:33 +0000 |
Chris Cannam |
Stub win64 deploy, + ogg testfiles
3.0-integration
|
Fri, 06 Jan 2017 21:04:53 +0000 |
Chris Cannam |
And similar approach for the writer
3.0-integration
|
Fri, 06 Jan 2017 20:51:47 +0000 |
Chris Cannam |
Take a different approach to using libsndfile -- the _fd function doesn't work for me in this build, so use the wchar api
3.0-integration
|
Fri, 06 Jan 2017 16:40:11 +0000 |
Chris Cannam |
Update WAV/MP3/BZipFileDevice code to avoid using local 8-bit encoding
3.0-integration
|
Fri, 06 Jan 2017 15:53:02 +0000 |
Chris Cannam |
Fix typo in encoded string
3.0-integration
|
Fri, 06 Jan 2017 15:44:55 +0000 |
Chris Cannam |
More work on getting tests (especially file encoding ones) running on Windows. Various problems here to do with interaction with test filenames in Hg repos
3.0-integration
|
Fri, 06 Jan 2017 12:11:08 +0000 |
Chris Cannam |
Add filename encoding tests
3.0-integration
|
Fri, 06 Jan 2017 11:21:09 +0000 |
Chris Cannam |
Untabify, comment test that doesn't apply on Windows
3.0-integration
|
Fri, 06 Jan 2017 09:50:13 +0000 |
Chris Cannam |
Untabify some more
3.0-integration
|
Fri, 06 Jan 2017 09:43:41 +0000 |
Chris Cannam |
Improved debug output for file open troubleshooting
3.0-integration
|
Fri, 06 Jan 2017 09:15:36 +0000 |
Chris Cannam |
Untabify
3.0-integration
|
Thu, 05 Jan 2017 14:30:49 +0000 |
Chris Cannam |
More cache hit counts; make debug output from colour 3d plot renderer (even though it is to SVDEBUG) appear only with explicit debug flag
3.0-integration
|
Thu, 05 Jan 2017 14:17:47 +0000 |
Chris Cannam |
Don't start in the middle when repainting the whole width while using a peak cache. It looks funny.
3.0-integration
|
Thu, 05 Jan 2017 14:02:54 +0000 |
Chris Cannam |
Make the colour 3d plot renderer able to support more than one level of peak cache; introduce a second "peak" cache for the spectrogram layer that actually has a 1-1 column relationship with the underlying FFT model, and use it in addition to the existing peak cache if memory is plentiful. Makes spectrograms appear much faster in many common situations.
3.0-integration
|
Thu, 05 Jan 2017 11:10:57 +0000 |
Chris Cannam |
Recreate FFT model when something changes, not the next time it's requested (avoids extra work when only retrieving the model)
3.0-integration
|
Wed, 04 Jan 2017 19:11:10 +0000 |
Chris Cannam |
Merge in subrepo
3.0-integration
|
Wed, 04 Jan 2017 16:53:06 +0000 |
Chris Cannam |
Pull out record buffer into a separate RT-ish thread
3.0-integration
|
Wed, 04 Jan 2017 16:03:12 +0000 |
Chris Cannam |
Wire up record monitoring
3.0-integration
|
Wed, 04 Jan 2017 14:22:39 +0000 |
Chris Cannam |
Make writable model updating explicit rather than essentially an arbitrary hidden accident
3.0-integration
|
Wed, 04 Jan 2017 13:23:18 +0000 |
Chris Cannam |
Add record update timer (very crude this)
3.0-integration
|
Wed, 04 Jan 2017 12:05:14 +0000 |
Chris Cannam |
Close wave file writer when recording stops (instead of leaving record file unclosed until the model is deleted)
3.0-integration
|
Wed, 04 Jan 2017 11:48:03 +0000 |
Chris Cannam |
Fix race condition in first-time recording, where adding the recording wave model would prompt the audio play source to note that its channel count had increased (from 0 to, say, 2) and thus to cause the audio device to be reopened, stopping recording. Fix is to make this only happen if channel count increases beyond that of the device, which shouldn't happen in the recording case
3.0-integration
|
Wed, 04 Jan 2017 09:57:13 +0000 |
Chris Cannam |
Report audio driver startup error
3.0-integration
|
Tue, 03 Jan 2017 16:23:11 +0000 |
Chris Cannam |
Provisionally add labels for normalisation menu (sigh)
3.0-integration
|
Tue, 03 Jan 2017 16:14:59 +0000 |
Chris Cannam |
Add help icon, + update subrepo
3.0-integration
|
Tue, 03 Jan 2017 15:15:26 +0000 |
Chris Cannam |
Store/recall colours by hex name; simpler and more general (was having trouble with reloading on Mac). Also update subrepos inc PortAudio build
3.0-integration
|
Tue, 03 Jan 2017 14:36:31 +0000 |
Chris Cannam |
Fix accidental breakage of PNG export while adding SVG export
3.0-integration
|
Tue, 03 Jan 2017 13:05:02 +0000 |
Chris Cannam |
Don't show icons on menus in OSX
3.0-integration
|
Tue, 03 Jan 2017 11:55:29 +0000 |
Chris Cannam |
Fix some compiler warnings
3.0-integration
|
Tue, 03 Jan 2017 11:40:27 +0000 |
Chris Cannam |
Update some subrepos
3.0-integration
|
Tue, 20 Dec 2016 11:53:14 +0000 |
Chris Cannam |
Fix erroneous use of single-colour setting to determine dark/light background when in segmentation mode
3.0-integration
|
Tue, 20 Dec 2016 10:49:24 +0000 |
Chris Cannam |
Further PropertyBox layout overhaul: avoid crash (/ assertion failure) when property type changes from e.g. colour to colourmap, by replacing the existing widget within the layout rather than trying to repopulate it
3.0-integration
|
Mon, 19 Dec 2016 16:34:38 +0000 |
Chris Cannam |
Merge from branch svg, and thus (in some subrepos) from levelpanwidget
3.0-integration
|
Mon, 19 Dec 2016 16:32:34 +0000 |
Chris Cannam |
Implement "Export SVG file..."
svg
|
Sat, 17 Dec 2016 11:06:48 +0000 |
Chris Cannam |
A useful simplification in rate handling: don't reset to 0 when last model goes
3.0-integration
|
Fri, 16 Dec 2016 19:35:57 +0000 |
Chris Cannam |
Fix incorrect initial display levels in LevelPanWidget
3.0-integration
|
Fri, 16 Dec 2016 16:29:53 +0000 |
Chris Cannam |
Support mouse wheel on level-pan tool button
3.0-integration
|
Fri, 16 Dec 2016 15:55:59 +0000 |
Chris Cannam |
Add swatches to colour map combo (optionally, as it turns out they are quite visually distracting)
3.0-integration
|
Fri, 16 Dec 2016 14:16:06 +0000 |
Chris Cannam |
Introduce a colour map combo too. Doesn't yet have swatches
3.0-integration
|
Fri, 16 Dec 2016 13:10:21 +0000 |
Chris Cannam |
Take advantage of the fact that a group layout is now always used, to simplify code
3.0-integration
|
Fri, 16 Dec 2016 13:08:33 +0000 |
Chris Cannam |
Introduce colour combobox class, to replace ad-hoc code in property box
3.0-integration
|
Fri, 16 Dec 2016 11:11:41 +0000 |
Chris Cannam |
Windows build fixes
3.0-integration
|
Thu, 15 Dec 2016 16:29:27 +0000 |
Chris Cannam |
Adjust spacing in property box
3.0-integration
|
Thu, 15 Dec 2016 15:34:33 +0000 |
Chris Cannam |
Some adjustments to make view elements clearer and more correctly sized, especially on hidpi (non-pixel-doubling) systems
levelpanwidget
|
Thu, 15 Dec 2016 15:12:44 +0000 |
Chris Cannam |
Retina thumbwheels
levelpanwidget
|
Thu, 15 Dec 2016 14:40:30 +0000 |
Chris Cannam |
Property box layout fixes etc
levelpanwidget
|
Thu, 15 Dec 2016 11:54:12 +0000 |
Chris Cannam |
Make play params area of property box look a bit better on OSX
levelpanwidget
|
Thu, 15 Dec 2016 10:36:41 +0000 |
Chris Cannam |
Moving around some UI bits
levelpanwidget
|
Thu, 15 Dec 2016 08:58:43 +0000 |
Chris Cannam |
Update to current bqresample API
3.0-integration
|
Wed, 14 Dec 2016 14:28:41 +0000 |
Chris Cannam |
Merge from branch 3.0-integration
levelpanwidget
|
Wed, 14 Dec 2016 11:56:58 +0000 |
Chris Cannam |
Play-selection fix, and some other subrepo updates
3.0-integration
|
Tue, 13 Dec 2016 16:23:48 +0000 |
Chris Cannam |
Fix some compiler problems
3.0-integration
|
Tue, 13 Dec 2016 16:06:28 +0000 |
Chris Cannam |
QuickTime file reader is no longer used on any platform and is probably rotting. Remove it
3.0-integration
|
Tue, 13 Dec 2016 15:47:11 +0000 |
Chris Cannam |
Subrepo updates
3.0-integration
|
Tue, 13 Dec 2016 15:23:21 +0000 |
Chris Cannam |
Update to use bqvec allocator for float vectors
3.0-integration
|
Tue, 13 Dec 2016 13:23:51 +0000 |
Chris Cannam |
Minor comment tweaks
3.0-integration
|
Tue, 13 Dec 2016 12:03:48 +0000 |
Chris Cannam |
Handle increases in the overall channel count by closing and reopening the audio device.
3.0-integration
|
Mon, 12 Dec 2016 17:15:24 +0000 |
Chris Cannam |
Remove unused signal
3.0-integration
|
Mon, 12 Dec 2016 17:08:10 +0000 |
Chris Cannam |
Jump to start when recording, so you can see something is happening
3.0-integration
|
Mon, 12 Dec 2016 17:01:51 +0000 |
Chris Cannam |
Fix race condition (in creating buffers vs starting process thread) and failure to reopen device in PortAudio driver
3.0-integration
|
Mon, 12 Dec 2016 15:46:53 +0000 |
Chris Cannam |
Merge
3.0-integration
|
Mon, 12 Dec 2016 15:45:33 +0000 |
Chris Cannam |
Reopen the audio device directly when preference is changed
3.0-integration
|
Mon, 12 Dec 2016 15:18:52 +0000 |
Chris Cannam |
Some hackery toward having a zoomlevel type
zoom
|
Mon, 12 Dec 2016 10:12:10 +0000 |
Chris Cannam |
Build fix in bqvec
3.0-integration
|
Mon, 12 Dec 2016 09:13:44 +0000 |
Chris Cannam |
Subrepo update
3.0-integration
|
Fri, 09 Dec 2016 19:27:16 +0000 |
Chris Cannam |
A bit more slack; make debug be off by default
3.0-integration
|
Fri, 09 Dec 2016 19:04:33 +0000 |
Chris Cannam |
Fix compiler warnings
3.0-integration
|
Fri, 09 Dec 2016 18:01:55 +0000 |
Chris Cannam |
Merge from branch bqresample
3.0-integration
|
Fri, 09 Dec 2016 17:56:10 +0000 |
Chris Cannam |
Debug addition
bqresample
|
Fri, 09 Dec 2016 14:40:49 +0000 |
Chris Cannam |
Fixes to sample rate and latency handling
bqresample
|
Fri, 09 Dec 2016 13:46:34 +0000 |
Chris Cannam |
Some fixes to sample rate management
bqresample
|
Fri, 09 Dec 2016 10:24:40 +0000 |
Chris Cannam |
Update to reflect bqresample API change
bqresample
|
Wed, 07 Dec 2016 14:48:15 +0000 |
Chris Cannam |
Fixes to (and debug output in!) ResamplerWrapper
bqresample
|
Wed, 07 Dec 2016 13:57:45 +0000 |
Chris Cannam |
Add a ResamplerWrapper
bqresample
|
Wed, 07 Dec 2016 12:04:57 +0000 |
Chris Cannam |
Update subrepo
bqresample
|
Wed, 07 Dec 2016 11:53:19 +0000 |
Chris Cannam |
Audio device selection
bqresample
|
Tue, 06 Dec 2016 16:07:22 +0000 |
Chris Cannam |
Fix incorrect return to Pulse when too few samples available (caused play hang)
bqresample
|
Tue, 06 Dec 2016 15:59:06 +0000 |
Chris Cannam |
Update for bqaudioio changes
bqresample
|
Tue, 06 Dec 2016 09:47:47 +0000 |
Chris Cannam |
Add faders svg
levelpanwidget
|
Tue, 06 Dec 2016 09:47:27 +0000 |
Chris Cannam |
Some work on play parameters and level controls in property box
levelpanwidget
|