sonic-visualiser: revision graph

graph

less more | rev 1643: (0) -1000 -896 +896 tip

Update RtMidi build to v2.1.12017-03-05, by Chris Cannam
Merge2017-03-05, by Chris Cannam
Fix crash when using speed controls on Windows (due to KissFFT linkage conflict). More debug information on startup.2017-03-05, by Chris Cannam
This will be a 3.0.1 pre build2017-03-05, by Chris Cannam
More debug output during startup2017-03-05, by Chris Cannam
Added tag sv_v3.0 for changeset c3380c78811f2017-03-02, by Chris Cannam
Added tag sv_v3.0rc1 for changeset 811fbe905f5esv_v3.0 2017-03-01, by Chris Cannam
Add brief mention of Pipersv_v3.0rc1 2017-03-01, by Chris Cannam
Update translation strings2017-03-01, by Chris Cannam
Docker file for 3.0 build2017-02-28, by Chris Cannam
Fix failure to respect saved linear-scale setting in layer when the model suggests it would prefer log scale2017-02-28, by Chris Cannam
Fix scale range and attribute name in colour 3d plot2017-02-28, by Chris Cannam
Fix equality comparison that caused test case failure on 32-bit build2017-02-28, by Chris Cannam
Next version will identify as 3.0 (as it's going to be an RC); remove beta dialog2017-02-28, by Chris Cannam
Emit2017-02-28, by Chris Cannam
Ctrl-click, and middle-button click, on level-pan widget reset to default (not implemented yet for level-pan tool button though)2017-02-28, by Chris Cannam
Fix normalisation ranges etc in Colour 3D Plot2017-02-28, by Chris Cannam
Remove commented-out code2017-02-28, by Chris Cannam
LogRange tests2017-02-28, by Chris Cannam
It's going to be March...2017-02-28, by Chris Cannam
Fix crash when trying to set object name on nonexistent model2017-02-28, by Chris Cannam
Write aggregate models to .sv file when saving document. They still are not reloaded, but I think this is far as I'm prepared to go for 3.0.2017-02-27, by Chris Cannam
Set a more appropriate name on aggregate model when deciding to retain it2017-02-27, by Chris Cannam
Store aggregate models in the document and release them when they are invalidated (because their components have been released). They're no longer leaked, but we still don't save them in the session file.2017-02-27, by Chris Cannam
And say so2017-02-27, by Chris Cannam
Invalidate an aggregate model when one of its components announces it's about to be deleted2017-02-27, by Chris Cannam
Update OSC handler: fix play (which wasn't working because it didn't resume audio driver) and speedup (wrong mapping for the new speed controls), and add more sensible new speed method2017-02-27, by Chris Cannam
Minor tweak2017-02-27, by Chris Cannam
Fix typo in condition operator; ensure c++11 used for config checks with gcc2017-02-27, by Chris Cannam
Update configure check for Cap'n Proto to avoid directly looking up mangled symbols2017-02-27, by Chris Cannam
Rework network permission tester to note that aggregate info may be used, and tweak for clarity2017-02-25, by Chris Cannam
Update vamp-plugin-sdk subrepo to v2.7 tag2017-02-24, by Chris Cannam
Update translateable strings2017-02-24, by Chris Cannam
Note the release ID stuff to the debug log as well as in the about box2017-02-24, by Chris Cannam
If we can't open a record device, fall back to playback-only mode2017-02-24, by Chris Cannam
Coalesce lines in docker install2017-02-24, by Chris Cannam
Subrepo update2017-02-23, by Chris Cannam
merge2017-02-23, by Chris Cannam
Update to match slightly changed Piper Vamp C++ API2017-02-10, by Chris Cannam
Added tag sv_v3.0beta4 for changeset d739444d2c482017-02-23, by Chris Cannam
Avoid Windows error dialog for DLL load failures in checkersv_v3.0beta4 2017-02-23, by Chris Cannam
Added tag sv_v3.0beta4 for changeset 2f13bdee5cb52017-02-23, by Chris Cannam
More beta docker deployments2017-02-23, by Chris Cannam
Debug notes, tidying2017-02-23, by Chris Cannam
Merge2017-02-22, by Chris Cannam
Fix various "model deleted with no aboutToDelete notification" warnings (and one associated potential memory leak)2017-02-22, by Chris Cannam
Next release will be beta42017-02-22, by Chris Cannam
Overrides2017-02-22, by Chris Cannam
Add activity log output to debug log too2017-02-22, by Chris Cannam
A bit more logging for PortAudio driver2017-02-21, by Chris Cannam
Merge2017-02-21, by Chris Cannam
Fixes to fdopen usage in svcore2017-02-21, by Chris Cannam
Add background images to win32 installer as well2017-02-21, by Chris Cannam
Remove some icons that are no longer used in unscalable versions; reorder for closer to alphabetical order2017-02-21, by Chris Cannam
Fix occasional off-by-one error in resampled audio file reader2017-02-21, by Chris Cannam
Add necessary file2017-02-21, by Chris Cannam
Subrepo update2017-02-21, by Chris Cannam
Logging from audio I/O2017-02-21, by Chris Cannam
Fix #1792 measure tool crosshairs rendered in wrong colour. Also extend crosshairs over the no-man's-land at the left2017-02-21, by Chris Cannam
Change setDesiredExtractor signature to take ServerDescription aggregate.dev/refactor-piper-related 2017-02-10, by Lucas Thompson
Introduce some POD structs for describing an external server application and the desired libraries to load from it, and disambiguating between empty list request and invalid list request. This allows for overriding PiperVampPluginFactory behaviour for using a PluginScan to populate the list request.dev/refactor-piper-related 2017-02-10, by Lucas Thompson
Invert control, injecting a server path on construction. Also add initializer_list constructor for multiple servers.dev/refactor-piper-related 2017-02-09, by Lucas Thompson
Added tag sv_v3.0beta3 for changeset 881d7f99bba32017-02-08, by Chris Cannam
Probably better background imagessv_v3.0beta3 2017-02-08, by Chris Cannam
Provisional installer backgrounds2017-02-07, by Chris Cannam
Update changelog2017-02-07, by Chris Cannam
Next build to be beta32017-02-07, by Chris Cannam
Some work to make spectrum layers (and slice layers generally) zoomable in the frequency axis. Also fixes a number of view id mixups in SliceLayer which broke offset calculations for the x axis scale.2017-02-07, by Chris Cannam
Update piper-cpp subrepo2017-02-06, by Chris Cannam
Merge2017-02-06, by Chris Cannam
Subrepo update2017-02-06, by Chris Cannam
Handle exceptions raised during plugin processing (as opposed to on init/configure, which were already handled)2017-01-31, by Chris Cannam
Subrepo update2017-02-01, by Chris Cannam
More tweaks to when to render from the middle2017-01-27, by Chris Cannam
Looks like we can be a bit more relaxed here2017-01-27, by Chris Cannam
Wire up normalise-visible-area mode in colour 3d plot2017-01-27, by Chris Cannam
Various rendering adjustments for layers in svgui2017-01-26, by Chris Cannam
Reduce amount of copying in FFTModel2017-01-26, by Chris Cannam
Randomise start offset for partial paints, it looks (I think) a little better2017-01-26, by Chris Cannam
Measure time taken to render per pixel, and use the time last time around to decide whether to be time constrained this time around2017-01-26, by Chris Cannam
Fix #1781 Running CQ Chromagram spits out stacks of "bin index out of range" warnings2017-01-26, by Chris Cannam
I think that switch to a git subrepo was a mistake. Let's go back to the ssw mirror.2017-01-21, by Chris Cannam
Update piper-cpp subrepo2017-01-20, by Chris Cannam
Update piper-cpp to github repo, and adjust build for revised layout in it2017-01-20, by Chris Cannam
Fix absurd typo that was preventing transforms from running at all!2017-01-19, by Chris Cannam
Report on failures that happen while configuring a transform2017-01-19, by Chris Cannam
Allow the completeness checker to report failure (invalid message) as well as incompleteness2017-01-19, by Chris Cannam
Minor debug bit2017-01-18, by Chris Cannam
Fix hang when trying to run transform for which the plugin refuses to initialise at all2017-01-18, by Chris Cannam
Added tag sv_v3.0beta2 for changeset b6f1052dbda12017-01-16, by Chris Cannam
Fix annoying chicken-and-egg typosv_v3.0beta2 2017-01-16, by Chris Cannam
Added tag sv_v3.0beta2 for changeset 7a8e909a15da2017-01-16, by Chris Cannam
Fix compiler warning2017-01-16, by Chris Cannam
Dockerfile for 3.0beta22017-01-16, by Chris Cannam
Next release will be beta22017-01-16, by Chris Cannam
Copy checker to top-level dir2017-01-16, by Chris Cannam
Fix incorrect call to getColumn() that broke the peak-frequency spectrogram and close zoom levels of the colour 3d plot2017-01-16, by Chris Cannam
With updated bqvec, shouldn't need any allocator hints2017-01-13, by Chris Cannam
Debug toward tracking down strange peak-frequency spectrogram update problem2017-01-13, by Chris Cannam
Make getPreferredPeakCache check the render mode itself2017-01-13, by Chris Cannam
Fix spurious test failure in 32-bit build2017-01-13, by Chris Cannam
Merge in subrepos2017-01-13, by Chris Cannam
Fix memory leak of cache pixmaps in View2017-01-13, by Chris Cannam
Fix (I think) crash on exit on Windows having loaded an mp32017-01-12, by Chris Cannam
Some Ubuntu/Fedora docker build material2017-01-12, by Chris Cannam
Use explicit include paths; these seem to be picking up the wrong include on Fedora only (strangely)2017-01-12, by Chris Cannam
Update Piper server to suspend stdout between responses; fixes hang on startup with certain Vamp plugins2017-01-12, by Chris Cannam
Complete that fix for the record target2017-01-11, by Chris Cannam
Fix flickery level meters2017-01-11, by Chris Cannam
Update configure to note capnp version dependency2017-01-11, by Chris Cannam
Add package step to docker file2017-01-11, by Chris Cannam
Update these so they work in Docker2017-01-11, by Chris Cannam
Comment field from LibraZiK distro2017-01-11, by Chris Cannam
Added tag sv_v3.0beta1 for changeset 3173259cdcc62017-01-10, by Chris Cannam
Dockerfile that builds the executable on Ubuntu 16.04, hopefully as the start of some more useful packaging strategysv_v3.0beta1 2017-01-10, by Chris Cannam
Ah, of course I was using the wrong variable here2017-01-10, by Chris Cannam
Typo fix and small reorder2017-01-10, by Chris Cannam
Fix "argument missing"2017-01-10, by Chris Cannam
Subrepo update2017-01-10, by Chris Cannam
Fix compiler warning, remove some debug out2017-01-10, by Chris Cannam
Merge from branch 3.0-integration2017-01-10, by Chris Cannam
Added tag last_v2.5_on_default_branch for changeset e6c7585863fe2017-01-10, by Chris Cannam
Show warning about beta release3.0-integration 2017-01-10, by Chris Cannam
Add dates to change log3.0-integration 2017-01-10, by Chris Cannam
Merge3.0-integration 2017-01-10, by Chris Cannam
When importing CSV, if the first line doesn't have a separator, continue to leave the separator indeterminate until we arrive at a line that does. Fixes inability to load correctly CSV files in which some lines have more columns than others3.0-integration 2017-01-10, by Chris Cannam
Better sizing on the Mac I think3.0-integration 2017-01-10, by Chris Cannam
Add "What's New" to help menu; primp up About box3.0-integration 2017-01-10, by Chris Cannam
Update PortAudio build for Win643.0-integration 2017-01-10, by Chris Cannam
Win32 fixes3.0-integration 2017-01-10, by Chris Cannam
Some platforms don't use native Ogg/Vorbis libraries3.0-integration 2017-01-10, by Chris Cannam
Use W64 instead of WAV for decoded files; use Ogg reader in preference to WAV one for Ogg files (WAV reader works, via libsndfile, but doesn't load metadata); fix Ogg reader to use QFile open instead of non-Win32-compatible API; add more encoder tests, audio writer test, midi reader test3.0-integration 2017-01-10, by Chris Cannam
Minor tweaks to CHANGELOG3.0-integration 2017-01-10, by Chris Cannam
Remove unneeded debug3.0-integration 2017-01-09, by Chris Cannam
Add Linux install target3.0-integration 2017-01-09, by Chris Cannam
Fix a strictly-incorrect #if guard3.0-integration 2017-01-09, by Chris Cannam
Merge3.0-integration 2017-01-09, by Chris Cannam
Fix inadequate #if guard for non-gcc builds3.0-integration 2017-01-09, by Chris Cannam
Try a deep codesign instead3.0-integration 2017-01-09, by Chris Cannam
More win32 build fixes3.0-integration 2017-01-09, by Chris Cannam
Further win32 build updates3.0-integration 2017-01-09, by Chris Cannam
Further win32 build updates3.0-integration 2017-01-09, by Chris Cannam
Fixes and updates for 32-bit Windows build3.0-integration 2017-01-09, by Chris Cannam
Doc updates3.0-integration 2017-01-09, by Chris Cannam
Add checker README; rename plugin-checker-helper binary (back) to vamp-plugin-load-checker -- I decided it was more useful to have a distinctive name for the installed binary than it was important to show that it was plugin-agnostic3.0-integration 2017-01-09, by Chris Cannam
Win64 installer updates3.0-integration 2017-01-08, by Chris Cannam
More of an effort at 64-bit Win installer3.0-integration 2017-01-08, by Chris Cannam
Update checker with version printout3.0-integration 2017-01-08, by Chris Cannam
Stub win64 deploy, + ogg testfiles3.0-integration 2017-01-06, by Chris Cannam
And similar approach for the writer3.0-integration 2017-01-06, by Chris Cannam
Take a different approach to using libsndfile -- the _fd function doesn't work for me in this build, so use the wchar api3.0-integration 2017-01-06, by Chris Cannam
Update WAV/MP3/BZipFileDevice code to avoid using local 8-bit encoding3.0-integration 2017-01-06, by Chris Cannam
Fix typo in encoded string3.0-integration 2017-01-06, by Chris Cannam
More work on getting tests (especially file encoding ones) running on Windows. Various problems here to do with interaction with test filenames in Hg repos3.0-integration 2017-01-06, by Chris Cannam
Add filename encoding tests3.0-integration 2017-01-06, by Chris Cannam
Untabify, comment test that doesn't apply on Windows3.0-integration 2017-01-06, by Chris Cannam
Untabify some more3.0-integration 2017-01-06, by Chris Cannam
Improved debug output for file open troubleshooting3.0-integration 2017-01-06, by Chris Cannam
Untabify3.0-integration 2017-01-06, by Chris Cannam
Couple of minor Windows updates3.0-integration 2017-01-05, by Chris Cannam
No hit counts in release3.0-integration 2017-01-05, by Chris Cannam
More cache hit counts; make debug output from colour 3d plot renderer (even though it is to SVDEBUG) appear only with explicit debug flag3.0-integration 2017-01-05, by Chris Cannam
Don't start in the middle when repainting the whole width while using a peak cache. It looks funny.3.0-integration 2017-01-05, by Chris Cannam
Make the colour 3d plot renderer able to support more than one level of peak cache; introduce a second "peak" cache for the spectrogram layer that actually has a 1-1 column relationship with the underlying FFT model, and use it in addition to the existing peak cache if memory is plentiful. Makes spectrograms appear much faster in many common situations.3.0-integration 2017-01-05, by Chris Cannam
Recreate FFT model when something changes, not the next time it's requested (avoids extra work when only retrieving the model)3.0-integration 2017-01-05, by Chris Cannam
Merge in subrepo3.0-integration 2017-01-04, by Chris Cannam
Pull out record buffer into a separate RT-ish thread3.0-integration 2017-01-04, by Chris Cannam
Wire up record monitoring3.0-integration 2017-01-04, by Chris Cannam
Make writable model updating explicit rather than essentially an arbitrary hidden accident3.0-integration 2017-01-04, by Chris Cannam
Add record update timer (very crude this)3.0-integration 2017-01-04, by Chris Cannam
Close wave file writer when recording stops (instead of leaving record file unclosed until the model is deleted)3.0-integration 2017-01-04, by Chris Cannam
Fix race condition in first-time recording, where adding the recording wave model would prompt the audio play source to note that its channel count had increased (from 0 to, say, 2) and thus to cause the audio device to be reopened, stopping recording. Fix is to make this only happen if channel count increases beyond that of the device, which shouldn't happen in the recording case3.0-integration 2017-01-04, by Chris Cannam
Report audio driver startup error3.0-integration 2017-01-04, by Chris Cannam
Mention hybrid normalisation in changelog3.0-integration 2017-01-03, by Chris Cannam
Avoid accidentally resetting locale to the empty string when reading pref3.0-integration 2017-01-03, by Chris Cannam
Run update-i18n script3.0-integration 2017-01-03, by Chris Cannam
Provisionally add labels for normalisation menu (sigh)3.0-integration 2017-01-03, by Chris Cannam
Add help icon, + update subrepo3.0-integration 2017-01-03, by Chris Cannam
Some copyright dates and build adjustments3.0-integration 2017-01-03, by Chris Cannam
Next actual release will be 3.0-beta13.0-integration 2017-01-03, by Chris Cannam
Store/recall colours by hex name; simpler and more general (was having trouble with reloading on Mac). Also update subrepos inc PortAudio build3.0-integration 2017-01-03, by Chris Cannam
Merge3.0-integration 2017-01-03, by Chris Cannam
Fix to removal of icons from menus on the Mac3.0-integration 2017-01-03, by Chris Cannam
Fix accidental breakage of PNG export while adding SVG export3.0-integration 2017-01-03, by Chris Cannam
Try to handle audio device selection more sensibly in cases where only one audio implementation is compiled in3.0-integration 2017-01-03, by Chris Cannam
Don't show icons on menus in OSX3.0-integration 2017-01-03, by Chris Cannam
Minor tweak3.0-integration 2017-01-03, by Chris Cannam
Fix some compiler warnings3.0-integration 2017-01-03, by Chris Cannam
Update some subrepos3.0-integration 2017-01-03, by Chris Cannam
Fix erroneous use of single-colour setting to determine dark/light background when in segmentation mode3.0-integration 2016-12-20, by Chris Cannam
Further PropertyBox layout overhaul: avoid crash (/ assertion failure) when property type changes from e.g. colour to colourmap, by replacing the existing widget within the layout rather than trying to repopulate it3.0-integration 2016-12-20, by Chris Cannam
Merge from branch svg, and thus (in some subrepos) from levelpanwidget3.0-integration 2016-12-19, by Chris Cannam
Implement "Export SVG file..."svg 2016-12-19, by Chris Cannam
A useful simplification in rate handling: don't reset to 0 when last model goes3.0-integration 2016-12-17, by Chris Cannam
Fix incorrect initial display levels in LevelPanWidget3.0-integration 2016-12-16, by Chris Cannam
Add overview colour preference3.0-integration 2016-12-16, by Chris Cannam
Start updating changelog for 3.03.0-integration 2016-12-16, by Chris Cannam
Support mouse wheel on level-pan tool button3.0-integration 2016-12-16, by Chris Cannam
Add swatches to colour map combo (optionally, as it turns out they are quite visually distracting)3.0-integration 2016-12-16, by Chris Cannam
Introduce a colour map combo too. Doesn't yet have swatches3.0-integration 2016-12-16, by Chris Cannam
Take advantage of the fact that a group layout is now always used, to simplify code3.0-integration 2016-12-16, by Chris Cannam
Introduce colour combobox class, to replace ad-hoc code in property box3.0-integration 2016-12-16, by Chris Cannam
Windows build fixes3.0-integration 2016-12-16, by Chris Cannam
Adjust spacing in property box3.0-integration 2016-12-15, by Chris Cannam
Merge from branch levelpanwidget3.0-integration 2016-12-15, by Chris Cannam
Some adjustments to make view elements clearer and more correctly sized, especially on hidpi (non-pixel-doubling) systemslevelpanwidget 2016-12-15, by Chris Cannam
Retina thumbwheelslevelpanwidget 2016-12-15, by Chris Cannam
Rejig preferences dialog to make it a bit less cumbersomelevelpanwidget 2016-12-15, by Chris Cannam
Property box layout fixes etclevelpanwidget 2016-12-15, by Chris Cannam
When the window is actually being closed, we need to close the prefs quickly (otherwise we get a crash on Mac)levelpanwidget 2016-12-15, by Chris Cannam
Make play params area of property box look a bit better on OSXlevelpanwidget 2016-12-15, by Chris Cannam
Small OSX fixeslevelpanwidget 2016-12-15, by Chris Cannam
Moving around some UI bitslevelpanwidget 2016-12-15, by Chris Cannam
Update to current bqresample API3.0-integration 2016-12-15, by Chris Cannam
Merge from branch 3.0-integrationlevelpanwidget 2016-12-14, by Chris Cannam
Play-selection fix, and some other subrepo updates3.0-integration 2016-12-14, by Chris Cannam
Fix some compiler problems3.0-integration 2016-12-13, by Chris Cannam
QuickTime file reader is no longer used on any platform and is probably rotting. Remove it3.0-integration 2016-12-13, by Chris Cannam
Explanatory text3.0-integration 2016-12-13, by Chris Cannam
Subrepo updates3.0-integration 2016-12-13, by Chris Cannam
Update to use bqvec allocator for float vectors3.0-integration 2016-12-13, by Chris Cannam
Minor comment tweaks3.0-integration 2016-12-13, by Chris Cannam
Handle increases in the overall channel count by closing and reopening the audio device.3.0-integration 2016-12-13, by Chris Cannam
Remove unused signal3.0-integration 2016-12-12, by Chris Cannam
Jump to start when recording, so you can see something is happening3.0-integration 2016-12-12, by Chris Cannam
Open record container folder instead of record folder (so you can see all existing recordings, no matter when they were made)3.0-integration 2016-12-12, by Chris Cannam
Minor tidy3.0-integration 2016-12-12, by Chris Cannam
Fix race condition (in creating buffers vs starting process thread) and failure to reopen device in PortAudio driver3.0-integration 2016-12-12, by Chris Cannam
Avoid overflowing vector if number of devices becomes smaller3.0-integration 2016-12-12, by Chris Cannam
Merge3.0-integration 2016-12-12, by Chris Cannam
Reopen the audio device directly when preference is changed3.0-integration 2016-12-12, by Chris Cannam
Some hackery toward having a zoomlevel typezoom 2016-12-12, by Chris Cannam
Build fix in bqvec3.0-integration 2016-12-12, by Chris Cannam
Subrepo update3.0-integration 2016-12-12, by Chris Cannam
A bit more slack; make debug be off by default3.0-integration 2016-12-09, by Chris Cannam
Fix compiler warnings3.0-integration 2016-12-09, by Chris Cannam
Merge from branch bqresample3.0-integration 2016-12-09, by Chris Cannam
Debug additionbqresample 2016-12-09, by Chris Cannam
Fixes to sample rate and latency handlingbqresample 2016-12-09, by Chris Cannam
Some fixes to sample rate managementbqresample 2016-12-09, by Chris Cannam
Update to reflect bqresample API changebqresample 2016-12-09, by Chris Cannam
Fixes to (and debug output in!) ResamplerWrapperbqresample 2016-12-07, by Chris Cannam
Add a ResamplerWrapperbqresample 2016-12-07, by Chris Cannam
Update subrepobqresample 2016-12-07, by Chris Cannam
Merge from branch bqaudioiobqresample 2016-12-07, by Chris Cannam
Merge from branch bqresamplebqaudioio 2016-12-07, by Chris Cannam
Audio device selectionbqresample 2016-12-07, by Chris Cannam
Fix incorrect return to Pulse when too few samples available (caused play hang)bqresample 2016-12-06, by Chris Cannam
Update for bqaudioio changesbqresample 2016-12-06, by Chris Cannam
Add faders svglevelpanwidget 2016-12-06, by Chris Cannam
Some work on play parameters and level controls in property boxlevelpanwidget 2016-12-06, by Chris Cannam
Switch to level-pan tool button in property boxlevelpanwidget 2016-12-06, by Chris Cannam
Introduce level-pan widget to property boxlevelpanwidget 2016-12-05, by Chris Cannam
Merge from branch 3.0-integrationlevelpanwidget 2016-12-05, by Chris Cannam
Start pruning other resampler logic than bqresamplebqresample 2016-12-05, by Chris Cannam
Remove resampler quality option (#1760)3.0-integration 2016-12-05, by Chris Cannam
Remove full-screen entry on OSX (#1759: SV's full-screen mode interacts badly with OSX full-screen mode)3.0-integration 2016-12-05, by Chris Cannam
Start incorporating level-pan widgetslevelpanwidget 2016-12-05, by Chris Cannam
Another use of WidgetScalemore-hidpi 2016-12-05, by Chris Cannam
Some icon updatesmore-hidpi 2016-12-05, by Chris Cannam
Scale the sizes of a few more UI elementsmore-hidpi 2016-12-05, by Chris Cannam
Add Apple Lossless files3.0-integration 2016-12-02, by Chris Cannam
Further updates to tests and debug output for file reading on OSX3.0-integration 2016-12-02, by Chris Cannam
More faffing with tests, to no great effect3.0-integration 2016-12-01, by Chris Cannam
Add gapless preference to prefs dialog; much work on audio read tests3.0-integration 2016-12-01, by Chris Cannam
Update dependency builds for OSX3.0-integration 2016-11-30, by Chris Cannam
Subrepo update3.0-integration 2016-11-30, by Chris Cannam
Delete audio I/O objects in a fixed order3.0-integration 2016-11-30, by Chris Cannam
Bigger colour swatches for bigger fonts3.0-integration 2016-11-30, by Chris Cannam
Always accept wheel events3.0-integration 2016-11-30, by Chris Cannam
Another check to ensure sync error suppressed at eof3.0-integration 2016-11-29, by Chris Cannam
Merge from branch mp3-gapless3.0-integration 2016-11-29, by Chris Cannam
Stop reporting sync errors only when we really are at eof, i.e. after the input callback has been called again (previously we just tested whether we'd buffered up all the input, which of course we do in one go at the start)mp3-gapless 2016-11-29, by Chris Cannam
Test fixesmp3-gapless 2016-11-29, by Chris Cannam
Update m4a files to exports from CoreAudio, rather than FAAC; update tests accordingly, and add test for spurious data after end of decodemp3-gapless 2016-11-29, by Chris Cannam
Handle trimming the padding from end as wellmp3-gapless 2016-11-29, by Chris Cannam
Refactor in CodedAudioFileReader in preparation for trimming at endmp3-gapless 2016-11-29, by Chris Cannam
Add gapless flag to MP3FileReader, and implement trimming the delay samples from the start (padding is not yet trimmed from end)mp3-gapless 2016-11-29, by Chris Cannam
Add test for last change to ColumnOp3.0-integration 2016-11-29, by Chris Cannam
Add header required when building with FFTW on Windows3.0-integration 2016-11-28, by Chris Cannam
Further fix to decision about when not to interpolate in ColumnOp::distribute3.0-integration 2016-11-28, by Chris Cannam
Subrepo merge3.0-integration 2016-11-28, by Chris Cannam
Interpolate always, when interpolation requested. Previous test failed to take into account varying bin height in log-scale modes, which meant interpolation might be necessary even when more bins than pixels.3.0-integration 2016-11-28, by Chris Cannam
Merge3.0-integration 2016-11-25, by Chris Cannam
Update svcore audio reader tests so as to check for truncated decode3.0-integration 2016-11-25, by Chris Cannam
Merge from branch subdivide-instants3.0-integration 2016-11-25, by Chris Cannam
Tidy up, with some convenient C++11ismssubdivide-instants 2016-11-25, by Chris Cannam
Add Winnow as wellsubdivide-instants 2016-11-25, by Chris Cannam
Implement "Subdivide Selected Instants". Also add the relabel command to the history, which I previously forgot to do!subdivide-instants 2016-11-25, by Chris Cannam
Fixes to mp3 decode in subrepo. Filter out Xing/LAME info frames, rather than letting them go to the mp3 decoder as if they were audio frames, fixing the 1152-sample zero pad at start of some decoded mp3 files (distinct from decoder delay). Add MAD_BUFFER_GUARD padding at end of mp3 buffer, in order to ensure last frame is decoded successfully (otherwise the decoded audio is truncated). Both gleaned from madplay source code.3.0-integration 2016-11-24, by Chris Cannam
Fix various column edge cases3.0-integration 2016-11-23, by Chris Cannam
Ordered config -- avoid sub-builds clobbering one another3.0-integration 2016-11-22, by Chris Cannam
Merge subrepos3.0-integration 2016-11-21, by Chris Cannam
Merge from branch bqfft3.0-integration 2016-11-21, by Chris Cannam
Branch to use bqfft code and remove FFTapibqfft 2016-11-21, by Chris Cannam
Subrepo update3.0-integration 2016-11-18, by Chris Cannam
Vamp SDK update3.0-integration 2016-11-18, by Chris Cannam
Fix fairly obscure mis-canonicalisation in RealTime (leading to non-canonical but still correct values)3.0-integration 2016-11-18, by Chris Cannam
Fix path in deploy script3.0-integration 2016-11-17, by Chris Cannam
Avoid building app bundles for helper executables3.0-integration 2016-11-17, by Chris Cannam
Use own scaling3.0-integration 2016-11-17, by Chris Cannam
Further column op tests and fixes3.0-integration 2016-11-17, by Chris Cannam
Tests and fixes for distribute(). Although this version of interpolated distribution passes these tests, it isn't right visually -- the expected values in the tests are offset. To be continued.3.0-integration 2016-11-17, by Chris Cannam
Start tests for ColumnOp (+ some resulting fixes)3.0-integration 2016-11-17, by Chris Cannam
Ah, this version should have been 23.0-integration 2016-11-16, by Chris Cannam
Subrepo update3.0-integration 2016-11-16, by Chris Cannam
Debug output improvements, and make the checker actually attempt to call the descriptor function for known plugin types3.0-integration 2016-11-16, by Chris Cannam
Test fixes3.0-integration 2016-11-15, by Chris Cannam
RealTime fixes to comply with new, more demanding tests; also run same (failing) tests on Vamp SDK version3.0-integration 2016-11-15, by Chris Cannam
Run tests3.0-integration 2016-11-15, by Chris Cannam
Remove some no-longer-used project files3.0-integration 2016-11-14, by Chris Cannam
Rearrange svcore tests so they can all be built from the top level3.0-integration 2016-11-14, by Chris Cannam
Further RealTime test (currently failing)3.0-integration 2016-11-14, by Chris Cannam
Re-enable unit tests3.0-integration 2016-11-14, by Chris Cannam
More timings and cache hit counts3.0-integration 2016-11-10, by Chris Cannam
A note on cache hit findings3.0-integration 2016-11-10, by Chris Cannam
Print out cache hit/miss counts3.0-integration 2016-11-09, by Chris Cannam
Use peak cache at one zoom level lower (since it exists at that level already -- this is a >= vs > question) + make naming more uniform3.0-integration 2016-11-08, by Chris Cannam
Merge from branch piper3.0-integration 2016-11-05, by Chris Cannam
Avoid assigning model resolution of 0 to models coming from plugins that report weirdly high output rates (symptom: data did not show up in edit layer data dialog, as the row/frame conversion failed)piper 2016-11-05, by Chris Cannam
Fix omitted topmost bin3.0-integration 2016-11-04, by Chris Cannam
Fix forehead-slapping failure to use the right model when rendering 3d plot in peaks cache mode (i.e. when zoomed quite far out)3.0-integration 2016-11-04, by Chris Cannam
Ensure columns all have correct height when retrieved (to avoid e.g. empty columns because a feature extractor's start time was >0)3.0-integration 2016-11-04, by Chris Cannam
Merge from branch piper3.0-integration 2016-11-04, by Chris Cannam
Some updates to accommodate adaptation for Sonic Annotatorpiper 2016-11-04, by Chris Cannam
Update subrepos to default branches after mergepiper 2016-11-04, by Chris Cannam
A bit more log info useful for win32/x64piper 2016-11-03, by Chris Cannam
Update to use listargs variant of Piper stuff (so that the plugin winnowing feature from the penultimate commit actually works)piper 2016-11-03, by Chris Cannam
Make SVDEBUG always write to a log file -- formerly this was disabled in NDEBUG builds. I think there's little use to that, it just means that we keep adding more cerr debug output because we aren't getting the log we need. And SVDEBUG logging is not usually used in tight loops, I don't think the performance overhead is too serious.piper 2016-11-03, by Chris Cannam
Use plugin scan results to inform the list requests issued to Piper serverspiper 2016-11-03, by Chris Cannam
Mergepiper 2016-11-02, by Chris Cannam
Subrepo statepiper 2016-11-02, by Chris Cannam
Logging; use only first ("native") helper for non-Vamp pluginspiper 2016-11-01, by Chris Cannam
More useful reporting outputpiper 2016-11-01, by Chris Cannam
Add omitted files, again!piper 2016-11-01, by Chris Cannam
Merge from branch 3.0-integrationpiper 2016-11-01, by Chris Cannam
Support multiple plugin checker helpers, as for multiple piper servers3.0-integration 2016-11-01, by Chris Cannam
Support for multiple servers3.0-integration 2016-11-01, by Chris Cannam
Merge from branch piper3.0-integration 2016-10-28, by Chris Cannam
Merge from branch project-file-reworkpiper 2016-10-28, by Chris Cannam
Numerous Windows fixes in subreposproject-file-rework 2016-10-28, by Chris Cannam
Ensure plugin is deleted in same thread that created and used itproject-file-rework 2016-10-28, by Chris Cannam
Don't -Werror hereproject-file-rework 2016-10-28, by Chris Cannam
Rename server to simple-server, and add some more description in usageproject-file-rework 2016-10-28, by Chris Cannam
Win32 fixes in subrepos (inc binary modes for server)project-file-rework 2016-10-27, by Chris Cannam
Error handlingproject-file-rework 2016-10-27, by Chris Cannam
Build the converter tooproject-file-rework 2016-10-27, by Chris Cannam
Update Piper server invocation conventionproject-file-rework 2016-10-27, by Chris Cannam
More Windows build bitsproject-file-rework 2016-10-27, by Chris Cannam
Win64 build flagsproject-file-rework 2016-10-26, by Chris Cannam
Couple of overlooked definesproject-file-rework 2016-10-25, by Chris Cannam
Tidier noconfig fileproject-file-rework 2016-10-25, by Chris Cannam
Fix maddening failure to start server with space in its pathproject-file-rework 2016-10-25, by Chris Cannam
Only if server not runningproject-file-rework 2016-10-25, by Chris Cannam
Don't need these frameworks for the serverproject-file-rework 2016-10-25, by Chris Cannam
Tidyingproject-file-rework 2016-10-25, by Chris Cannam
Minor build updatesproject-file-rework 2016-10-25, by Chris Cannam
OSX build updatesproject-file-rework 2016-10-25, by Chris Cannam
OSX build fixes and logicproject-file-rework 2016-10-25, by Chris Cannam
Add basic noconfig.priproject-file-rework 2016-10-25, by Chris Cannam
Merge from branch piperproject-file-rework 2016-10-25, by Chris Cannam
Mergepiper 2016-10-25, by Chris Cannam
Add files that I forgot to track on Friday (sigh)piper 2016-10-25, by Chris Cannam
Merge in subrepoproject-file-rework 2016-10-24, by Chris Cannam
Cut down vastly on the number of config.pri files and places where their contents has to be effectively duplicated without themproject-file-rework 2016-10-24, by Chris Cannam
Server project filepiper 2016-10-24, by Chris Cannam
Error reporting for Piper server startuppiper 2016-10-21, by Chris Cannam
Fixes to choice of plugin factorypiper 2016-10-21, by Chris Cannam
Add out-of-process execution to prefs dialogpiper 2016-10-21, by Chris Cannam
Default to using Piperpiper 2016-10-21, by Chris Cannam
Restore native-Vamp factory and make the choice between Piper and Native a preferencepiper 2016-10-21, by Chris Cannam
Use .cpp file insteadpiper 2016-10-20, by Chris Cannam
Avoid instantiating all plugins on startup, + build fixespiper 2016-10-20, by Chris Cannam
Update subrepos3.0-integration 2016-10-20, by Chris Cannam
Update subrepospiper 2016-10-20, by Chris Cannam
Merge from branch 3.0-integrationpiper 2016-10-20, by Chris Cannam
Merge from branch msvc2015_643.0-integration 2016-10-20, by Chris Cannam
Further MSVC build stuff. Committing this as-is because it's building and running now, but there's a lot to tidy up.msvc2015_64 2016-10-19, by Chris Cannam
Tidy and re-fix for Linuxmsvc2015_64 2016-10-19, by Chris Cannam
MSVC build fixes, and show 32/64-bit in Aboutmsvc2015_64 2016-10-18, by Chris Cannam
MatrixFile is no longer used3.0-integration 2016-10-18, by Chris Cannam
Update subrepopiper 2016-10-17, by Chris Cannam
Update subrepopiper 2016-10-17, by Chris Cannam
Fix compiler warningspiper 2016-10-17, by Chris Cannam
Restore plugin categoriespiper 2016-10-17, by Chris Cannam
More cautious locking on sparse model modificationpiper 2016-10-17, by Chris Cannam
Pull out model creation into the transformer thread run(), so that all communications with the plugin server happen on a single thread. Then make the model accessor wait for them to be created (which still happens right at the start of processing) before returning.piper 2016-10-17, by Chris Cannam
Try AutoPlugin; also not very successfulpiper 2016-10-14, by Chris Cannam
Add piper-cpp stuff, experimentallypiper 2016-10-14, by Chris Cannam
Update subrepos (bookkeeping only really)3.0-integration 2016-09-20, by Chris Cannam
Patch from Fab Nicol to fix a problem with Recent Files menu:3.0-integration 2016-08-15, by Chris Cannam
Avoid warning3.0-integration 2016-08-15, by Chris Cannam
Introduce labels in RangeMapper and use them in AudioDial, though only for tooltip at present. Make use of this for spectrogram magic -81dB/-Inf threshold. Also introduce static strings for inf/pi and use where appropriate.3.0-integration 2016-08-05, by Chris Cannam
Merge work on unified spectrogram and colour 3d plot caching renderer3.0-integration 2016-08-05, by Chris Cannam
Since 1d317e717fe4 we no longer want to fft scale in hybrid mode. (This might also restore compatibility with Tony and prior SV save sessions -- test this.)spectrogram-minor-refactor 2016-08-05, by Chris Cannam
Make text labels on vertical scale ticks visiblespectrogram-minor-refactor 2016-08-05, by Chris Cannam
Fixes to phase display and colour scale for it; tidy up some debug outputspectrogram-minor-refactor 2016-08-05, by Chris Cannam
Pull out paintDetailedScalespectrogram-minor-refactor 2016-08-05, by Chris Cannam
Minor tidy, + go back to opaque-only spectrogram as intendedspectrogram-minor-refactor 2016-08-05, by Chris Cannam
Restore illuminateLocalFeatures in spectrogramspectrogram-minor-refactor 2016-08-05, by Chris Cannam
Reconnect double-click region select in spectrogramspectrogram-minor-refactor 2016-08-04, by Chris Cannam
Restore phase displayspectrogram-minor-refactor 2016-08-04, by Chris Cannam
Re-implement dB^2 (log-power) spectrogram settingspectrogram-minor-refactor 2016-08-04, by Chris Cannam
Re-enable (little-used) normalise-visible-range option in spectrogram layerspectrogram-minor-refactor 2016-08-03, by Chris Cannam
Use a count of bins rather than min and max bins (because the name maxbin tells us nothing about whether the range is inclusive or not)spectrogram-minor-refactor 2016-08-03, by Chris Cannam
Another small tidyspectrogram-minor-refactor 2016-08-02, by Chris Cannam
Fix vertical zoom/scroll in colour 3d plot layerspectrogram-minor-refactor 2016-08-02, by Chris Cannam
Minor tidyspectrogram-minor-refactor 2016-08-02, by Chris Cannam
Sensible vertical scale and hybrid normalisation range in colour 3d plotspectrogram-minor-refactor 2016-08-02, by Chris Cannam
Minor tidyspectrogram-minor-refactor 2016-08-02, by Chris Cannam
A threshold fixspectrogram-minor-refactor 2016-08-02, by Chris Cannam
Float/double conversion fixesspectrogram-minor-refactor 2016-08-01, by Chris Cannam
Fix threshold in spectrogram -- it wasn't working in the last release.spectrogram-minor-refactor 2016-08-01, by Chris Cannam
Scale range matchingspectrogram-minor-refactor 2016-08-01, by Chris Cannam
Some notes on gainspectrogram-minor-refactor 2016-08-01, by Chris Cannam
Some tidyingspectrogram-minor-refactor 2016-07-22, by Chris Cannam
Fixes and debug output for mag range calculationsspectrogram-minor-refactor 2016-07-22, by Chris Cannam
Wiring through the magnitude range updatesspectrogram-minor-refactor 2016-07-22, by Chris Cannam
Toward updating mag cachespectrogram-minor-refactor 2016-07-20, by Chris Cannam
Inch toward using the mag cache (currently will crash with debug exception)spectrogram-minor-refactor 2016-07-20, by Chris Cannam
Introduce ScrollableMagRangeCache, plus some tidying etcspectrogram-minor-refactor 2016-07-20, by Chris Cannam
Fix translucent mode for spectrogramspectrogram-minor-refactor 2016-07-19, by Chris Cannam
Wire up invertVerticalspectrogram-minor-refactor 2016-07-19, by Chris Cannam
Re-enable a couple more featuresspectrogram-minor-refactor 2016-07-19, by Chris Cannam
Tidyspectrogram-minor-refactor 2016-07-19, by Chris Cannam
Consts and willRenderOpaquespectrogram-minor-refactor 2016-07-19, by Chris Cannam
Colourmap rotation (inelegantly)spectrogram-minor-refactor 2016-07-19, by Chris Cannam
Subrepo updatespectrogram-minor-refactor 2016-07-19, by Chris Cannam
Make VerticalBinLayer an actual Layer (via SliceableLayer)spectrogram-minor-refactor 2016-07-19, by Chris Cannam
Mergespectrogram-minor-refactor 2016-07-15, by Chris Cannam
Update dataquay subrepo for 0.9.1last_v2.5_on_default_branch 2016-07-15, by Chris Cannam
Start introducing translucent rendererspectrogram-minor-refactor 2016-07-18, by Chris Cannam
Fix failure to reinitialise m_peakCachespectrogram-minor-refactor 2016-07-14, by Chris Cannam
Remove almost all of the "old" paint logic from Colour3DPlotLayerspectrogram-minor-refactor 2016-07-14, by Chris Cannam
Remove all of the "old" paint logic from SpectrogramLayer, even where it hasn't been completely replaced yetspectrogram-minor-refactor 2016-07-14, by Chris Cannam
Convert ColourScaleType into an enum classspectrogram-minor-refactor 2016-07-14, by Chris Cannam
Convert ColumnNormalization to an enum class, and separate out normalize-visiblespectrogram-minor-refactor 2016-07-14, by Chris Cannam
Turn BinDisplay and BinScale into enum classesspectrogram-minor-refactor 2016-07-14, by Chris Cannam
Fix potential crash in Dense3dModelPeakCache owing to combination of wrong width calculation and wrong handling of width overrunspectrogram-minor-refactor 2016-07-14, by Chris Cannam
Delete renderersspectrogram-minor-refactor 2016-07-13, by Chris Cannam
Begin using renderer in colour 3d plot layerspectrogram-minor-refactor 2016-07-13, by Chris Cannam
Create, but don't yet use, a renderer in the colour 3d plot layerspectrogram-minor-refactor 2016-07-13, by Chris Cannam
Switch in "standard" colour scale, bin scale, normalisation -- not quite handled elegantly or correctly yetspectrogram-minor-refactor 2016-07-13, by Chris Cannam
Minor build fixspectrogram-minor-refactor 2016-07-11, by Chris Cannam
Introduce peak frequency rendering (basics of)spectrogram-minor-refactor 2016-07-11, by Chris Cannam
Far more pragmatic update strategyspectrogram-minor-refactor 2016-07-11, by Chris Cannam
Fix draw buffer sizing problem in scaled renderingspectrogram-minor-refactor 2016-07-11, by Chris Cannam
Split out cache rendering functions and some fixes to calculationsspectrogram-minor-refactor 2016-07-07, by Chris Cannam
Colour scales (partly)spectrogram-minor-refactor 2016-07-07, by Chris Cannam
Time-constrained renderingspectrogram-minor-refactor 2016-07-07, by Chris Cannam
Cut over to using the renderer (though it's very incomplete) and fix some cache problems and pointer lifetime misunderstandingsspectrogram-minor-refactor 2016-07-05, by Chris Cannam
Start to introduce renderer objectsspectrogram-minor-refactor 2016-07-05, by Chris Cannam
One FFT model per spectrogram (again!) - but we do still need a magnitude range per view, as views could be showing different regionsspectrogram-minor-refactor 2016-07-05, by Chris Cannam
One FFT size method, no member for itspectrogram-minor-refactor 2016-07-02, by Chris Cannam
Simplify the oversampling/zero-padding logic. FFT model selection no longer depends on the view.spectrogram-minor-refactor 2016-07-01, by Chris Cannam
Add VerticalBinLayer to SpectrogramLayerspectrogram-minor-refactor 2016-07-01, by Chris Cannam
Scale and copyspectrogram-minor-refactor 2016-07-01, by Chris Cannam
Start introducing render codespectrogram-minor-refactor 2016-07-01, by Chris Cannam
VerticalBinLayer for vertical mapping abstraction. Not totally sure about thisspectrogram-minor-refactor 2016-07-01, by Chris Cannam
Commentsspectrogram-minor-refactor 2016-06-30, by Chris Cannam
Minor adjustmentsspectrogram-minor-refactor 2016-06-30, by Chris Cannam
More filling in render & cache codespectrogram-minor-refactor 2016-06-30, by Chris Cannam
Move drawVisibleText to PaintAssistantspectrogram-minor-refactor 2016-06-30, by Chris Cannam
Move LayerGeometryProvider from view to layerspectrogram-minor-refactor 2016-06-30, by Chris Cannam
Two functions, rather than one with a boolean argspectrogram-minor-refactor 2016-06-30, by Chris Cannam
Another tiny bitspectrogram-minor-refactor 2016-06-29, by Chris Cannam
Pull out render timerspectrogram-minor-refactor 2016-06-29, by Chris Cannam
More renderer stubbingspectrogram-minor-refactor 2016-06-29, by Chris Cannam
Commentsspectrogram-minor-refactor 2016-06-27, by Chris Cannam
Start stubbing Colour3DPlotRendererspectrogram-minor-refactor 2016-06-23, by Chris Cannam
Use a params structurespectrogram-minor-refactor 2016-06-23, by Chris Cannam
ColourScale class, comments, namingspectrogram-minor-refactor 2016-06-23, by Chris Cannam
Commentspectrogram-minor-refactor 2016-06-23, by Chris Cannam
Commentsspectrogram-minor-refactor 2016-06-23, by Chris Cannam
Fix possible crash when scrolling to endspectrogram-minor-refactor 2016-06-23, by Chris Cannam
Extend column logic to peak frequency display as well, and correct some scopes according to whether values are per source column or per target pixelspectrogram-minor-refactor 2016-06-20, by Chris Cannam
Pull out column ops into ColumnOpspectrogram-minor-refactor 2016-06-20, by Chris Cannam
A more sensible order for column operationsspectrogram-minor-refactor 2016-06-17, by Chris Cannam
Don't need thesespectrogram-minor-refactor 2016-06-15, by Chris Cannam
Replace old logic with calls to new functions; basic refactor part A done, the code now compiles againspectrogram-minor-refactor 2016-06-15, by Chris Cannam
A couple more helper functionsspectrogram-minor-refactor 2016-06-15, by Chris Cannam
Mid-refactor to pull out the bulk of paintDrawBuffer into chunksspectrogram-minor-refactor 2016-06-13, by Chris Cannam
Merge from default branchspectrogram-minor-refactor 2016-06-13, by Chris Cannam
Subrepo update3.0-integration 2016-06-13, by Chris Cannam
Don't paint if model has zero width3.0-integration 2016-05-26, by Chris Cannam
Make archiver check & complain if the appropriate docs page returns a 4043.0-integration 2016-05-05, by Chris Cannam
Subrepo update3.0-integration 2016-05-04, by Chris Cannam
Win32 build fix3.0-integration 2016-05-03, by Chris Cannam
Version on this branch will be 3.03.0-integration 2016-04-27, by Chris Cannam
Deploy plugin checker helper; update deployment for current Qt3.0-integration 2016-04-27, by Chris Cannam
OSX build fixes3.0-integration 2016-04-27, by Chris Cannam
Update subrepos3.0-integration 2016-04-22, by Chris Cannam
Merge branches 3.0-integration and imaf_enc to 3.0-plus-imaf3.0-plus-imaf 2016-04-20, by Chris Cannam
Merge from branch pluginscan3.0-integration 2016-04-15, by Chris Cannam
Check for plugin scan helper checker helper program in suitable directory, & tidy up warning messages somewhatpluginscan 2016-04-15, by Chris Cannam
Update checker code layoutpluginscan 2016-04-14, by Chris Cannam
Make this warning a #pragma message, as we don't want it to make compilation fail with -Werror setpluginscan 2016-04-14, by Chris Cannam
Make use of, and warn for, the plugin checker for all types of plugin. Haven't yet resolved the question of how to install and find it.pluginscan 2016-04-14, by Chris Cannam
First cut running (but not yet using output of, or recovering from errors in) the plugin checker at startuppluginscan 2016-04-14, by Chris Cannam
Remove Vamp SDK from dependency builds for Windows, as for OSX3.0-integration 2016-03-18, by Chris Cannam
Start including Vamp SDK into main build, as we do with Sonic Annotator3.0-integration 2016-03-18, by Chris Cannam
Update subrepo2016-03-04, by Chris Cannam
Merge from default!3.0-integration 2016-03-04, by Chris Cannam
Merge from default branch in subrepos3.0-integration 2016-03-04, by Chris Cannam
Merge in subrepo2016-03-04, by Chris Cannam
Merge in subrepo3.0-integration 2016-03-02, by Chris Cannam
Make ViewProxy objects share the ids of their Views; fixes incorrect colour scale drawing3.0-integration 2016-02-09, by Chris Cannam
Clumsily avoid segfault on pulse shutdown3.0-integration 2016-02-09, by Chris Cannam
Update i18n files3.0-integration 2016-02-04, by Chris Cannam
Merge from default branch3.0-integration 2016-02-04, by Chris Cannam
Merge subrepos3.0-integration 2016-02-04, by Chris Cannam
Merge from branch "spectrogram-minor-refactor"3.0-integration 2016-02-04, by Chris Cannam
Truncate edges when about to paint beyond limits of cachespectrogram-minor-refactor 2016-02-03, by Chris Cannam
Don't use partial paints when zoomed in far enough to have boundary alignment concerns. (But boundary calculations are still wrong, leading to a logic error exception.)spectrogram-minor-refactor 2016-02-02, by Chris Cannam
Commentspectrogram-minor-refactor 2016-02-02, by Chris Cannam
Timing tweaks to reduce the number of repaintsspectrogram-minor-refactor 2016-02-02, by Chris Cannam
Fix cache validity boundary conditionspectrogram-minor-refactor 2016-02-02, by Chris Cannam
*Really* add overlooked file!spectrogram-minor-refactor 2016-02-02, by Chris Cannam
Be a bit more flexible about which symbol to accept in resampler selectionspectrogram-minor-refactor 2016-02-02, by Chris Cannam
Revert last commit (wrong branch)2016-02-02, by Chris Cannam
Add overlooked file!2016-02-02, by Chris Cannam
Updated Czech localisation file from Pavel Fric2016-02-01, by Chris Cannam
Update subrepo2016-01-30, by Chris Cannam
Update acinclude files to look for qt5-qmake as well as qmake-qt52016-01-30, by Chris Cannam
Further fixes to the scrollable cache logicspectrogram-minor-refactor 2016-01-29, by Chris Cannam
Start refactoring out the spectrogram image cachespectrogram-minor-refactor 2016-01-29, by Chris Cannam
Subrepo updatespectrogram-minor-refactor 2016-01-27, by Chris Cannam
build fixspectrogram-minor-refactor 2016-01-27, by Chris Cannam
OS/X updatesspectrogram-minor-refactor 2016-01-27, by Chris Cannam
Fix calculation of repaint area when we haven't scrolled but cache is not completespectrogram-minor-refactor 2016-01-27, by Chris Cannam
Start repainting from the middle -- but this is quite unreliablespectrogram-minor-refactor 2016-01-26, by Chris Cannam
Fix return value from paintDrawBuffer in rightToLeft case; propagate timing change to PeakFrequencies version as wellspectrogram-minor-refactor 2016-01-26, by Chris Cannam
Draw right-to-left when adjoining an existing cache valid area on the rightspectrogram-minor-refactor 2016-01-26, by Chris Cannam
Make paint method do its own timing and abandon if it's taking too long (still needs some work on queueing correct repaints of the remainder)spectrogram-minor-refactor 2016-01-25, by Chris Cannam
Rearrange cache update calculations so as to use the actual painted width returned by paint functions (though they only ever return the same width as requested, at this point)spectrogram-minor-refactor 2016-01-25, by Chris Cannam
Avoid reusing a large paint width if the zoom level has changed (in case it has changed dramatically, as for example when the user hits the F key). Also some tidying and adjustment to timing stuff3.0-integration 2016-01-22, by Chris Cannam
Tidy a bit3.0-integration 2016-01-22, by Chris Cannam
Subrepos3.0-integration 2016-01-22, by Chris Cannam
Convert 3d model column type from QVector to std::vector; replace another user of ResizeableBitset3.0-integration 2016-01-22, by Chris Cannam
Subrepos3.0-integration 2016-01-22, by Chris Cannam
Subrepos3.0-integration 2016-01-22, by Chris Cannam
Merge3.0-integration 2016-01-21, by Chris Cannam
Subrepo update3.0-integration 2015-12-10, by Chris Cannam
Mutex fix in bqaudioio to avoid delay in seeking during playback3.0-integration 2016-01-21, by Chris Cannam
Update translations3.0-integration 2016-01-21, by Chris Cannam
Make colour 3d plot layer colour a preference as well3.0-integration 2016-01-21, by Chris Cannam
Add default spectrogram colours to prefs3.0-integration 2016-01-20, by Chris Cannam
Merge from branch colourschemes3.0-integration 2016-01-19, by Chris Cannam
Tidycolourschemes 2016-01-19, by Chris Cannam
Rearrange colours, make some of them more attractive, give some of them nicer namescolourschemes 2016-01-19, by Chris Cannam
Remove background mode, it no longer works properlycolourschemes 2016-01-19, by Chris Cannam
Remove debug outcolourschemes 2016-01-19, by Chris Cannam
Provide a sensible name for this colour schemecolourschemes 2016-01-19, by Chris Cannam
Merge from branch 3.0-integrationcolourschemes 2016-01-19, by Chris Cannam
Merge from branch plugin-startup-test3.0-integration 2016-01-19, by Chris Cannam
Show warning to the user when plugin population has problemsplugin-startup-test 2016-01-19, by Chris Cannam
Check for plugin loadability before trying to load in the main process (POSIX only so far)plugin-startup-test 2016-01-11, by Chris Cannam
Pull out candidate listplugin-startup-test 2016-01-08, by Chris Cannam
Experimentation with colour schemes and mappingscolourschemes 2015-12-02, by Chris Cannam
Update icons3.0-integration 2015-12-02, by Chris Cannam
Merge from default branch3.0-integration 2015-11-18, by Chris Cannam
If libjack0 is sought, install jackd instead (seems like a more common neutral dependency independent of jack version)2015-11-16, by Chris Cannam
Ensure version is updated in control file2015-11-16, by Chris Cannam
Added tag sv_v2.5_osx_deploy for changeset e206741df37d2015-10-23, by Chris Cannam
Mergesv_v2.5_osx_deploy 2015-10-23, by Chris Cannam
Deployment fixes. Qt on OSX now seems to depend on QtDBus, so copy that in, and also fail if anything is found to depend on an absent Qt framework.2015-10-23, by Chris Cannam
Added tag sv_v2.5 for changeset 94253fa113182015-10-22, by Chris Cannam
Error only in debug buildsv_v2.5 2015-10-22, by Chris Cannam
Deployment fix2015-10-22, by Chris Cannam
Build fix2015-10-22, by Chris Cannam
Update CHANGELOG, back out ill-advised svgui feature2015-10-22, by Chris Cannam
Merge from default branch3.0-integration 2015-10-20, by Chris Cannam
Fix embarrassing failure to reload Note layers2015-10-20, by Chris Cannam
Wakeup3.0-integration 2015-10-14, by Chris Cannam
Remove debug3.0-integration 2015-10-14, by Chris Cannam
PulseAudio lock fixes3.0-integration 2015-10-14, by Chris Cannam
Update subrepos3.0-integration 2015-10-14, by Chris Cannam
Merge from recording branch3.0-integration 2015-10-12, by Chris Cannam
Fix suspending/resuming audio device; it wasn't suspending when playback reached the end, only when the user stopped explicitlyrecording 2015-09-22, by Chris Cannam
Merge from branch "recording"3.0-integration 2015-09-17, by Chris Cannam
Merge from branch "scalable-icons"3.0-integration 2015-09-17, by Chris Cannam
Update iconsscalable-icons 2015-09-17, by Chris Cannam
Update subreporecording 2015-09-17, by Chris Cannam
Win32 build fixesrecording 2015-09-16, by Chris Cannam
Suspend/resume audio device when not in use to save battery (only implemented for PulseAudioIO so far)recording 2015-09-16, by Chris Cannam
Recording message in status barrecording 2015-09-16, by Chris Cannam
Add audio record mode (option to replace session) and support for browsing to record directoryrecording 2015-09-15, by Chris Cannam
Check for audioIO as well as play target; + deployment bits3.0-integration 2015-08-20, by Chris Cannam
Subrepo update3.0-integration 2015-08-20, by Chris Cannam
Merge from branch recording3.0-integration 2015-08-20, by Chris Cannam
Fix reloading session with recorded audiorecording 2015-08-20, by Chris Cannam
Toward resampling on output in bqaudioiorecording 2015-08-19, by Chris Cannam
New filename for each audio recordingrecording 2015-08-19, by Chris Cannam
Make WritableWaveFileModel a true WaveFileModel (and ReadOnlyWaveFileModel the other sort of it). Enable recording from an empty session using that.recording 2015-08-19, by Chris Cannam
Toward recording without something already loaded (needs more work though)recording 2015-08-19, by Chris Cannam
OK, we can record -- sort ofrecording 2015-08-18, by Chris Cannam
Basic recording stuffrecording 2015-08-18, by Chris Cannam
Start stubbing in audio recordrecording 2015-08-18, by Chris Cannam
Pulse stream and client namesbqaudioio 2015-08-17, by Chris Cannam
Graft some fixes in subrepobqaudioio 2015-08-10, by Chris Cannam
Fix very long delay on seeking during playback (caused by Pulse driver using max length as block size)3.0-integration 2015-08-05, by Chris Cannam
Avoid playing repeated buffer while re-seeking3.0-integration 2015-08-05, by Chris Cannam
Merge from branch bqaudioio3.0-integration 2015-08-04, by Chris Cannam
Merge3.0-integration 2015-08-04, by Chris Cannam
Merge from default branch3.0-integration 2015-07-24, by Chris Cannam
Add Range headerbqaudioio 2015-08-04, by Chris Cannam
Mutex fixes for PulseAudiobqaudioio 2015-08-04, by Chris Cannam
Initial work toward switching to bqaudioio library (so as to get I/O, not just O)bqaudioio 2015-08-04, by Chris Cannam
Necessary include3.0-integration 2015-08-04, by Chris Cannam
dataquay rollbackimaf_enc 2015-07-15, by alo
removed imaf slidersimaf_enc 2015-07-14, by alo
Make the play-speed dial settings much easier to understand and use (fixes #1328)2015-07-13, by Chris Cannam
Merge from default branch3.0-integration 2015-07-07, by Chris Cannam
Major fix to bug in handling of fuzzy column in CSV import (introduced since the last release) which meant that col 6 of a wide CSV would go missing completely!2015-07-07, by Chris Cannam
Fix assignment of values to regions on import, in case where region model contains duplicate points2015-07-03, by Chris Cannam
Merge3.0-integration 2015-07-01, by Chris Cannam
Subrepo3.0-integration 2015-07-01, by Chris Cannam
Merge from branch simple-fft-model3.0-integration 2015-07-01, by Chris Cannam
Merge from default branchsimple-fft-model 2015-01-07, by Chris Cannam
Fix a number of warnings in the 32-bit build2015-07-01, by Chris Cannam
Merge from branch simple-fft-model3.0-integration 2015-07-01, by Chris Cannam
Merge from branch osx-retina3.0-integration 2015-07-01, by Chris Cannam
Add new icons to resource fileosx-retina 2015-07-01, by Chris Cannam
A few new iconsosx-retina 2015-07-01, by Chris Cannam
Switch off debug againsimple-fft-model 2015-07-01, by Chris Cannam
Fill extent is not relevant in simple-fft-model code, as it's always the full extentsimple-fft-model 2015-07-01, by Chris Cannam
Fix dark point at highlight of LED buttonosx-retina 2015-06-30, by Chris Cannam
Render LED button direct to widget, making it look OK on retina screenosx-retina 2015-06-30, by Chris Cannam
Subrepososx-retina 2015-06-30, by Chris Cannam
Mergeosx-retina 2015-06-30, by Chris Cannam
Subrepo updateosx-retina 2015-06-30, by Chris Cannam
Tighten spacing around sides of property box on OS/Xosx-retina 2015-06-30, by Chris Cannam
Mergesimple-fft-model 2015-06-30, by Chris Cannam
Build fixsimple-fft-model 2015-06-30, by Chris Cannam
Merge from branch normalize_hybrid_option3.0-integration 2015-06-26, by Chris Cannam
Merge from branch osx-retina3.0-integration 2015-06-26, by Chris Cannam
Merge from branch simple-fft-model3.0-integration 2015-06-26, by Chris Cannam
Update subrepos for 3.0-integration3.0-integration 2015-06-26, by Chris Cannam
Two-channel testsimple-fft-model 2015-06-16, by Chris Cannam
Fix a cache-related dumbitudesimple-fft-model 2015-06-16, by Chris Cannam
Raise this maximum, so longer files can be shown in the overview panesimple-fft-model 2015-06-15, by Chris Cannam
Use in-memory cache for WAV files as well, if appropriatesimple-fft-model 2015-06-15, by Chris Cannam
Smooth signal flow through from file to fft modelsimple-fft-model 2015-06-15, by Chris Cannam
Store temporary audio files in memory if we have plenty of itsimple-fft-model 2015-06-15, by Chris Cannam
Tidysimple-fft-model 2015-06-15, by Chris Cannam
Rework audio file reader API to prefer using std containerssimple-fft-model 2015-06-15, by Chris Cannam
Fix to fft cachesimple-fft-model 2015-06-13, by Chris Cannam
A small cache for source samplessimple-fft-model 2015-06-12, by Chris Cannam
Make a small cache of recently-used columnssimple-fft-model 2015-06-12, by Chris Cannam
Normalization functionsimple-fft-model 2015-06-12, by Chris Cannam
Simplest naive FFTModel implementation (+ fill in tests)simple-fft-model 2015-06-12, by Chris Cannam
Gut the old code, but don't replace it yet (so nothing will link yet)simple-fft-model 2015-06-12, by Chris Cannam
More testssimple-fft-model 2015-06-12, by Chris Cannam
Start making the FFT model tests into proper tests2015-06-12, by Chris Cannam
Tidy2015-06-11, by Chris Cannam
Tidy dense time-value model API a bit; add first simple unit test for FFT model2015-06-10, by Chris Cannam
Remove some obsolete unused files2015-06-10, by Chris Cannam
Merge from default branchosx-retina 2015-06-10, by Chris Cannam
Update subrepo2015-06-10, by Chris Cannam
Report error if transform fails (during operation, rather than at start as was already reported)2015-06-10, by Chris Cannam
Update deployment script for QtSvgosx-retina 2015-06-04, by Chris Cannam
Add forgotten zoom iconosx-retina 2015-06-04, by Chris Cannam
Couple more iconsosx-retina 2015-06-01, by Chris Cannam
Update subrepososx-retina 2015-06-01, by Chris Cannam
Fix crash when importing wide CSV file2015-05-22, by Chris Cannam
Add half-wave rectification option to Colour 3D Plot layer2015-05-22, by Chris Cannam
minor debug thingosx-retina 2015-05-21, by Chris Cannam
Fixes to font sizing in colour 3d plot layer (for #1221)osx-retina 2015-05-21, by Chris Cannam
Merge in subrepo2015-05-21, by Chris Cannam
Avoid going pop when setting play head to before time 02015-05-21, by Chris Cannam
Prevent selection being dragged beyond start/end of content2015-05-21, by Chris Cannam
Box colour a darker grey by default (but also changeable now)2015-05-21, by Chris Cannam
Fix #1222 CSV export of time-instants layer omits last point2015-05-15, by Chris Cannam
Merge from branch scalable-iconsosx-retina 2015-05-14, by Chris Cannam
Merge from default branchosx-retina 2015-05-14, by Chris Cannam
Fix #1220 Flexi-note layer appears in Layers menu2015-05-14, by Chris Cannam
Handle case where plugin erroneously returns sample rate 0 for fixed-rate output2015-05-14, by Chris Cannam
Icon updatescalable-icons 2015-05-13, by Chris Cannam
Fixes to, and tests for, RealTime-to-text methods2015-05-12, by Chris Cannam
Display note name derived from value, when hovering over time-value feature if the scale unit is Hz2015-05-12, by Chris Cannam
Copyright date2015-05-12, by Chris Cannam
Address #1214, layer import produces wrong layer type. We needed a more principled approach to making sure the format gets updated properly and the dialog elements are consistent (basically separating making the dialog elements consistent from subsequently updating the format). This change should provide that, though there may be gotchas still.2015-05-12, by Chris Cannam
Iconsscalable-icons 2015-05-06, by Chris Cannam
Simplistic play-selectionscalable-icons 2015-05-06, by Chris Cannam
Make play-pause biggerscalable-icons 2015-05-06, by Chris Cannam
Rewind/ffwd shouldn't be available when nothing loadedscalable-icons 2015-05-06, by Chris Cannam
Slightly improved text positioningscalable-icons 2015-05-06, by Chris Cannam
Update splash, and a build fixscalable-icons 2015-05-06, by Chris Cannam
Add splash screen codescalable-icons 2015-05-06, by Chris Cannam
Fixes to scaling of splash screenscalable-icons 2015-05-06, by Chris Cannam
Various fixes to scalable renderingscalable-icons 2015-05-06, by Chris Cannam
Experiment with loading SVGsscalable-icons 2015-05-06, by Chris Cannam
Make Retina layer rendering selectable in settingsosx-retina 2015-04-29, by Chris Cannam
Fix font size for painter when rendering scaledosx-retina 2015-04-29, by Chris Cannam
Fix positioning of local feature illumination rectangleosx-retina 2015-04-29, by Chris Cannam
Fix rendering of selectionsosx-retina 2015-04-29, by Chris Cannam
Always render to a buffer, then from that to the widgetosx-retina 2015-04-27, by Chris Cannam
Painting off-cache means we shouldn't use proxy (we aren't scaling.. yet)osx-retina 2015-04-20, by Chris Cannam
Some scaling & zoom bitsosx-retina 2015-04-20, by Chris Cannam
Update subrepos and config stuffosx-retina 2015-04-20, by Chris Cannam
Allow layers to be loaded without models if their layer class explicitly says it's OK (otherwise default template won't load, as it has an empty waveform layer)2015-04-20, by Chris Cannam
Don't set version from configure, track it in version.h instead. Next will be 2.5.2015-04-20, by Chris Cannam
Merge from branch cxx112015-04-20, by Chris Cannam
Subrepo updates2015-04-20, by Chris Cannam
Fix crash caused by using proxy (of unknown lifecycle) instead of view as cache keyosx-retina 2015-03-18, by Chris Cannam
Pass proxy to layer for paintingosx-retina 2015-03-18, by Chris Cannam
Many fixes for the previous stuffosx-retina 2015-03-17, by Chris Cannam
Another small replacementosx-retina 2015-03-17, by Chris Cannam
Subrepoosx-retina 2015-03-17, by Chris Cannam
Experiment with querying paint rect separately from view rectosx-retina 2015-03-11, by Chris Cannam
Subrepo statecxx11 2015-03-11, by Chris Cannam
Start branch for retina hi-res renderingosx-retina 2015-03-11, by Chris Cannam
Build fixes for OS/Xcxx11 2015-03-11, by Chris Cannam
Subrepocxx11 2015-03-11, by Chris Cannam
Subreposcxx11 2015-03-11, by Chris Cannam
Comments etccxx11 2015-03-11, by Chris Cannam
Mergecxx11 2015-03-10, by Chris Cannam
Dohcxx11 2015-03-10, by Chris Cannam
Subreposcxx11 2015-03-10, by Chris Cannam
Nothing of consequencecxx11 2015-03-10, by Chris Cannam
More type fixes. We now build with -Wconversion, on this platform (64-bit Linux) at least.cxx11 2015-03-10, by Chris Cannam
Further dedicated-types fixescxx11 2015-03-10, by Chris Cannam
More type fixescxx11 2015-03-10, by Chris Cannam
More type fixes, primarily in the spectrogramcxx11 2015-03-10, by Chris Cannam
A few more fixescxx11 2015-03-09, by Chris Cannam
Working through the float/double and int/sv_frame_t fixescxx11 2015-03-09, by Chris Cannam
Move to using double rather than float for floating-point calculations (float only for storage); more build fixescxx11 2015-03-09, by Chris Cannam
More conversion fixescxx11 2015-03-09, by Chris Cannam
Now builds with current svcore; next, try it again with -Wconversion in svgui, svapp, and sonic-visualisercxx11 2015-03-04, by Chris Cannam
Merge from default branchcxx11 2015-03-03, by Chris Cannam
Update subrepo2015-03-02, by Chris Cannam
Specify UTF-8 encoding when writing XML formats -- the XML header always indicated UTF-8 but the QTextStream defaulted to local encoding which is generally not UTF-8 on Windows2015-03-02, by Chris Cannam
Updates for win32 build - repackaging with Qt5.4 to fix failure to start up properly on 32-bit win8.12.4-stable 2015-02-25, by Chris Cannam
Update and merge2015-02-26, by Chris Cannam
Debug reporting from FileSource2015-02-26, by Chris Cannam
Enable ThreadSanitizerdatarace 2015-02-24, by Chris Cannam
Add option to toggle H:M:S time display (when off, just show seconds even when more than 60)2015-02-18, by Chris Cannam
Update subrepos2015-02-13, by Chris Cannam
Updates for next win32 build2015-02-10, by Chris Cannam
Merge from default branchcxx11 2015-02-09, by Chris Cannam
Fix arg in string2015-01-16, by Chris Cannam
Tidy up layout and ranges for unit conversion dialog, highlight in red any out-of-range values2014-12-15, by Chris Cannam
Start connecting up tempo bits2014-12-09, by Chris Cannam
Update units when prefs change2014-12-09, by Chris Cannam
Oops, included some unintended cruft2014-12-09, by Chris Cannam
hz -> freq, and some layout rearrangement2014-12-09, by Chris Cannam
Fixes to limits etc in unit converter2014-12-08, by Chris Cannam
Quick hack at a multiplex option for transform input (see #1108)2014-12-04, by Chris Cannam
Wire up note/octave stuff2014-12-02, by Chris Cannam
Start adding piano note2014-12-02, by Chris Cannam
Adding the unit converter code might have enhanced the previous commit a little2014-12-02, by Chris Cannam
Start work on unit converter2014-12-01, by Chris Cannam
Unit tests for StringBits::splitQuoted2014-12-01, by Chris Cannam
If the first column of a CSV file has zero or one non-empty values in it, during the first 5 rows, then ignore it by default2014-12-01, by Chris Cannam
Fix close-quote immediately before separator in StringBits::splitQuoted2014-11-27, by Chris Cannam
Avoid completely smoothing out a curve if it alternates high/low, when zooming out far enough to use lines instead2014-11-27, by Chris Cannam
Couple more RealTime tests2014-11-20, by Chris Cannam
Subrepo state2014-11-19, by Chris Cannam
CXX11 (-std=c++11) branch, to test build environments before making any code adaptationscxx11 2014-11-17, by Chris Cannam
Discard wildly excessive wheel events2014-11-10, by Chris Cannam
Handle variable columns by importing all of them (not just the minimum number)2014-10-03, by Chris Cannam
Add milliseconds as CSV import timing option2014-10-03, by Chris Cannam
Update version in wxs file2.4-stable 2014-10-02, by Chris Cannam
Merge from branch 2.4-stable2014-10-01, by Chris Cannam
Merge2.4-stable 2014-10-01, by Chris Cannam
Added tag sv_v2.4.1 for changeset 2868d5abf1a32.4-stable 2014-10-01, by Chris Cannam
Update changelog2.4-stable sv_v2.4.1 2014-10-01, by Chris Cannam
Version will be 2.4.12.4-stable 2014-10-01, by Chris Cannam
Subrepo update2.4-stable 2014-10-01, by Chris Cannam
Merge from branch 2.4-stable2014-09-29, by Chris Cannam
Correct some really stupid fixed-length string stuff, including a genuine stack overflow that causes a crash on OS/X for certain colour 3d plot data.2.4-stable 2014-09-29, by Chris Cannam
Obsolete tag2.4beta2 2014-09-24, by Chris Cannam
Merge2014-09-24, by Chris Cannam
Update subrepo2014-09-11, by Chris Cannam
Added tag sv_v2.4beta2 for changeset 4a7c62938a132.4beta2 2014-09-10, by Chris Cannam
Add a forgotten item to the changelog2014-09-24, by Chris Cannam
Added tag sv_v2.4_linux_deploy for changeset 8215909b74d22014-09-24, by Chris Cannam
Deploy fixessv_v2.4_linux_deploy 2014-09-24, by Chris Cannam
Auto dependencies2014-09-24, by Chris Cannam
Output for control file2014-09-24, by Chris Cannam
Add deploy script2014-09-24, by Chris Cannam
Debian skeleton stuff2014-09-24, by Chris Cannam
Fixes to desktop file2014-09-24, by Chris Cannam
Some install and packaging updates2014-09-24, by Chris Cannam
Added tag sv_v2.4 for changeset cfbea29fae642014-09-23, by Chris Cannam
Added tag sv_v2.4beta2 for changeset 7b3aaa237e662.4beta2 2014-09-23, by Chris Cannam
This will be SV v2.4sv_v2.4 2014-09-23, by Chris Cannam
Fix #1058 clicking row in Layer Edit dialog when colour 3d plot layer active jumps to wrong frame (was using sample rate where resolution intended)2014-09-16, by Chris Cannam
Refuse to play if no sample rate available (fixes crash when playing after deleting only pane)2014-09-12, by Chris Cannam
Don't print activity2014-09-12, by Chris Cannam
Ignore cov-int directory2014-09-12, by Chris Cannam
Experimentally add the hybrid normalisation as an option (not working well either in UI or implementation)normalize_hybrid_option 2014-09-12, by Chris Cannam
Do not draw the model time extents if the top layer does not have time as its x axis (fixing #1057)2.4beta2 2014-09-11, by Chris Cannam
Pull across beta bits from prior beta branch2.4beta2 sv_v2.4beta2 2014-09-10, by Chris Cannam
Update README and CHANGELOG2014-09-10, by Chris Cannam
If the old and new-style user resource prefixes return different results, move across resources from old to new to prime the new path first time we look it up2014-09-10, by Chris Cannam
Use QStandardPaths::writableLocation(DataLocation) instead of synthesising path ourselves (hopefully fixing encoding difficulties on Windows)2014-09-09, by Chris Cannam
Respond tidily to user cancellation during download, instead of going on to attempt to load the nonexistent file as a non-audio format2014-09-09, by Chris Cannam
Use openPath instead of open() when opening local file or URL (for progress indicator). I think I didn't realise this distinction between the two functions, which formerly were both named open().2014-09-09, by Chris Cannam
Avoid complaint about unused return value2014-09-03, by Chris Cannam
Fix potential null pointer deref2014-09-03, by Chris Cannam
Fix memory leak (from coverity scan)2014-09-03, by Chris Cannam
Fix some uninitialised values (from coverity scan)2014-09-03, by Chris Cannam
Remove redundant code (sourceChannels must be at least 2 "because we offer pan") (from coverity scan)2014-09-03, by Chris Cannam
Fix dead code; fix previous fix to midi insertion logic2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Fix a couple of not-very-realistic potential null-pointer derefs (from coverity scan)2014-09-03, by Chris Cannam
Simplify some logic where loop was used with an unconditional "break" that meant it could only happen once (from coverity scan)2014-09-03, by Chris Cannam
Fix some potential null-pointer derefs, and simplify some logic where loops were used with an unconditional "break" that meant they could only happen once (from coverity scan)2014-09-03, by Chris Cannam
Fix some potential divide by zeros (from coverity scan)2014-09-03, by Chris Cannam
Fix minor resource leak (from coverity scan)2014-09-03, by Chris Cannam
Clarify some sneaky logic2014-09-03, by Chris Cannam
Fix uninitialised variable (from coverity scan)2014-09-03, by Chris Cannam
Fix a couple of inadvertant integer divisions (from coverity scan)2014-09-03, by Chris Cannam
Remove redundant code (from coverity scan)2014-09-03, by Chris Cannam
Fix potential divide by zero2014-09-03, by Chris Cannam
Clarify some sneaky logic2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Fix some potential null derefs (from coverity scan)2014-09-03, by Chris Cannam
Fix memory leak2014-09-03, by Chris Cannam
Fix various slightly dodgy derefs and the like (from coverity scan)2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Remove redundant code (from coverity scan)2014-09-03, by Chris Cannam
Fix very minor but erroneous non-float-arithmetic2014-09-03, by Chris Cannam
clarify2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Back out last change (see subrepo commit log)2014-09-03, by Chris Cannam
Fix to iterator invalidation (from coverity scan)2014-09-03, by Chris Cannam
As coverity points out, MIDI_END_OF_EXCLUSIVE (0xF7) cannot result from masking with MIDI_MESSAGE_TYPE_MASK(0xF0). Not that it really matters here.2014-09-03, by Chris Cannam
Fix return of empty string as bool value (from coverity scan, interesting the compiler doesn't mind)2014-09-03, by Chris Cannam
Frame this condition more defensively (from coverity scan)2014-09-03, by Chris Cannam
Fix fallthrough in switch (from coverity scan)2014-09-03, by Chris Cannam
Fix something coverity reports as "copy-paste error" (actually it doesn't matter, but the fix reads better)2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Fix accidental declaration of section as bool rather than int (definitely a bug but what did it cause? see #1051, we need units here) (from coverity scan)2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Fix some (probably benign) uninitialised members (from coverity scan)2014-09-03, by Chris Cannam
Fix one actual null pointer deref and a couple of potential ones, plus an uninitialised value (from coverity scan)2014-09-03, by Chris Cannam
Return seems to work better than Enter here2014-09-03, by Chris Cannam
Fix uninitialised values2014-09-03, by Chris Cannam
Fix uninitialised members2014-09-03, by Chris Cannam
Remove redundant code (sourceChannels must be at least 2 "because we offer pan") (from coverity scan)2014-09-03, by Chris Cannam
Fix uninitialised bool2014-09-03, by Chris Cannam
Fix incoherent logic for what happens if MIDI arrives while no suitable layer is current (from coverity scan)2014-09-03, by Chris Cannam
Fix local declaration hiding outer scope, which caused export-multiple to export a single file as well as the multiple one (from coverity scan)2014-09-03, by Chris Cannam
Small text fix2014-09-02, by Chris Cannam
Update CHANGELOG2014-09-02, by Chris Cannam
Add const version of this accessor2014-09-02, by Chris Cannam
Use getInteractionLayer for immediate interactions, rather than getSelectedLayer (which may be invisible)2014-09-02, by Chris Cannam
Return getSelectedLayer to being able to return a dormant layer -- if that isn't allowed, then getInteractionLayer is what you want2014-09-02, by Chris Cannam
Use fixed-order when exporting layers to a session2014-09-02, by Chris Cannam
Restore the old prev/next layer commands (that were never enabled because they didn't work) using the new fixed order layer list (so they now do work)2014-09-02, by Chris Cannam
Use fixed-order layer list for property container enumeration. Fixes habit of the layer property tabs to jump about when adding a new layer.2014-09-02, by Chris Cannam
Populate the fixed order layer list2014-09-02, by Chris Cannam
Introduce (but don't yet populate) the fixed layers vector; rename m_layers to m_layerStack to reflect its ordering by stacking2014-09-02, by Chris Cannam
Add getInteractionLayer() and some docs2014-09-02, by Chris Cannam
Fix #1047 Floating-point exception on exit if no file loaded2014-09-01, by Chris Cannam
Fix #1039 (Menu bar missing, under Ubuntu with Gnome 3)2014-09-01, by Chris Cannam
Branch rearrangement in svapp2.4beta1 2014-09-01, by Chris Cannam
Handle keyboard shortcuts with Shift modifier in the same way as those with no modifier2014-09-01, by Chris Cannam
Add left/right scroll to changelog2014-08-14, by Chris Cannam
Added tag sv_v2.4beta1 for changeset 885e89a6c11d2.4beta1 2014-08-14, by Chris Cannam
Update for Qt 5.3 and WiX 3.8 - transplanted from beta branch2014-08-14, by Chris Cannam
Update for Qt 5.3 and WiX 3.82.4beta1 sv_v2.4beta1 2014-08-14, by Chris Cannam
Fix plugin copying (correct target directories) - transplanted from beta branch2014-08-14, by Chris Cannam
Version 2.3.90 gives us more space for future betas than 2.3.92.4beta1 2014-08-14, by Chris Cannam
Show beta version2.4beta1 2014-08-14, by Chris Cannam
Fix plugin copying (correct target directories)2.4beta1 2014-08-14, by Chris Cannam
Attempt to make Qt plugin loading work. But it isn't.2.4beta1 2014-08-13, by Chris Cannam
Merge from default branch2.4beta1 2014-08-13, by Chris Cannam
This spacing works a bit better on the Mac (though not really well enough)2014-08-13, by Chris Cannam
Don't label time zero, it gets cut off by opaque end layer2014-08-13, by Chris Cannam
Beta release dialog2.4beta1 2014-08-13, by Chris Cannam
Set parents for various dialogs (to avoid them hitting focus-stealing prevention)2014-08-13, by Chris Cannam
Give some dialogs their proper parents2014-08-13, by Chris Cannam
If current pane has the main model in it as a waveform, use that for the pan layer even if it isn't the top layer in the pane2014-08-13, by Chris Cannam
Remove model from pan layer when it's about to be deleted, fixing #10352014-08-13, by Chris Cannam
Tidy2014-08-13, by Chris Cannam
Debug out2014-08-13, by Chris Cannam
More debug2014-08-13, by Chris Cannam
Attempt to get rebuilt-shortcuts working on OS/X (unsuccessfully)2014-08-13, by Chris Cannam
Call finaliseMenus again each time the pane/layer menus are reworked2014-08-13, by Chris Cannam
Avoid compiler warnings when building without lrdf2014-08-13, by Chris Cannam
Some temporary action debug output2014-08-13, by Chris Cannam
Make sparse time-value layers inaudible by default (user must un-mute them) for compatibility with earlier versions2014-08-11, by Chris Cannam
Debug output stuff2014-07-25, by Chris Cannam
Subrepo updates2014-07-25, by Chris Cannam
Rich text for tooltip -- apart from anything else, this ensures it gets word-wrapped2014-07-25, by Chris Cannam
Merge subrepos from tonioni branch2014-07-18, by Chris Cannam

less more | rev 1643: (0) -1000 -896 +896 tip

Mercurial > hg > sonic-visualiser

graph