view icons/measure1cursor.xbm @ 1472:59c6b75da437 3.0-integration

Fix race condition in first-time recording, where adding the recording wave model would prompt the audio play source to note that its channel count had increased (from 0 to, say, 2) and thus to cause the audio device to be reopened, stopping recording. Fix is to make this only happen if channel count increases beyond that of the device, which shouldn't happen in the recording case
author Chris Cannam
date Wed, 04 Jan 2017 11:48:03 +0000
parents 152619d379e0
children
line wrap: on
line source
#define measure1cursor_width 32
#define measure1cursor_height 32
#define measure1cursor_x_hot 15
#define measure1cursor_y_hot 14
static unsigned char measure1cursor_bits[] = {
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00,
   0x00, 0xc0, 0x00, 0x00, 0x00, 0xe0, 0x00, 0x00, 0x00, 0xf0, 0x00, 0x00,
   0x00, 0x98, 0x00, 0x00, 0x00, 0x8c, 0x00, 0x00, 0x00, 0x86, 0x00, 0x00,
   0x00, 0x83, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0xe0, 0x3f, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };