annotate Doxyfile @ 1951:5665c580081a

Force older version of capnp for this older compiler on the Linux travis image
author Chris Cannam
date Thu, 09 Aug 2018 10:56:52 +0100
parents aad0c5aca114
children
rev   line source
Chris@486 1 # Doxyfile 1.4.4
Chris@486 2
Chris@486 3 # This file describes the settings to be used by the documentation system
Chris@486 4 # doxygen (www.doxygen.org) for a project
Chris@486 5 #
Chris@486 6 # All text after a hash (#) is considered a comment and will be ignored
Chris@486 7 # The format is:
Chris@486 8 # TAG = value [value, ...]
Chris@486 9 # For lists items can also be appended using:
Chris@486 10 # TAG += value [value, ...]
Chris@486 11 # Values that contain spaces should be placed between quotes (" ")
Chris@486 12
Chris@486 13 #---------------------------------------------------------------------------
Chris@486 14 # Project related configuration options
Chris@486 15 #---------------------------------------------------------------------------
Chris@486 16
Chris@486 17 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
Chris@486 18 # by quotes) that should identify the project.
Chris@486 19
Chris@486 20 PROJECT_NAME = Sonic Visualiser
Chris@486 21
Chris@486 22 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
Chris@486 23 # This could be handy for archiving the generated documentation or
Chris@486 24 # if some version control system is used.
Chris@486 25
Chris@486 26 PROJECT_NUMBER = 1.9
Chris@486 27
Chris@486 28 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
Chris@486 29 # base path where the generated documentation will be put.
Chris@486 30 # If a relative path is entered, it will be relative to the location
Chris@486 31 # where doxygen was started. If left blank the current directory will be used.
Chris@486 32
Chris@486 33 OUTPUT_DIRECTORY = doc
Chris@486 34
Chris@486 35 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
Chris@486 36 # 4096 sub-directories (in 2 levels) under the output directory of each output
Chris@486 37 # format and will distribute the generated files over these directories.
Chris@486 38 # Enabling this option can be useful when feeding doxygen a huge amount of
Chris@486 39 # source files, where putting all generated files in the same directory would
Chris@486 40 # otherwise cause performance problems for the file system.
Chris@486 41
Chris@486 42 CREATE_SUBDIRS = NO
Chris@486 43
Chris@486 44 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
Chris@486 45 # documentation generated by doxygen is written. Doxygen will use this
Chris@486 46 # information to generate all constant output in the proper language.
Chris@486 47 # The default language is English, other supported languages are:
Chris@486 48 # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
Chris@486 49 # Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
Chris@486 50 # Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
Chris@486 51 # Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
Chris@486 52 # Swedish, and Ukrainian.
Chris@486 53
Chris@486 54 OUTPUT_LANGUAGE = English
Chris@486 55
Chris@486 56 # This tag can be used to specify the encoding used in the generated output.
Chris@486 57 # The encoding is not always determined by the language that is chosen,
Chris@486 58 # but also whether or not the output is meant for Windows or non-Windows users.
Chris@486 59 # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
Chris@486 60 # forces the Windows encoding (this is the default for the Windows binary),
Chris@486 61 # whereas setting the tag to NO uses a Unix-style encoding (the default for
Chris@486 62 # all platforms other than Windows).
Chris@486 63
Chris@486 64 USE_WINDOWS_ENCODING = NO
Chris@486 65
Chris@486 66 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
Chris@486 67 # include brief member descriptions after the members that are listed in
Chris@486 68 # the file and class documentation (similar to JavaDoc).
Chris@486 69 # Set to NO to disable this.
Chris@486 70
Chris@486 71 BRIEF_MEMBER_DESC = YES
Chris@486 72
Chris@486 73 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
Chris@486 74 # the brief description of a member or function before the detailed description.
Chris@486 75 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
Chris@486 76 # brief descriptions will be completely suppressed.
Chris@486 77
Chris@486 78 REPEAT_BRIEF = YES
Chris@486 79
Chris@486 80 # This tag implements a quasi-intelligent brief description abbreviator
Chris@486 81 # that is used to form the text in various listings. Each string
Chris@486 82 # in this list, if found as the leading text of the brief description, will be
Chris@486 83 # stripped from the text and the result after processing the whole list, is
Chris@486 84 # used as the annotated text. Otherwise, the brief description is used as-is.
Chris@486 85 # If left blank, the following values are used ("$name" is automatically
Chris@486 86 # replaced with the name of the entity): "The $name class" "The $name widget"
Chris@486 87 # "The $name file" "is" "provides" "specifies" "contains"
Chris@486 88 # "represents" "a" "an" "the"
Chris@486 89
Chris@486 90 ABBREVIATE_BRIEF =
Chris@486 91
Chris@486 92 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
Chris@486 93 # Doxygen will generate a detailed section even if there is only a brief
Chris@486 94 # description.
Chris@486 95
Chris@486 96 ALWAYS_DETAILED_SEC = NO
Chris@486 97
Chris@486 98 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
Chris@486 99 # inherited members of a class in the documentation of that class as if those
Chris@486 100 # members were ordinary class members. Constructors, destructors and assignment
Chris@486 101 # operators of the base classes will not be shown.
Chris@486 102
Chris@486 103 INLINE_INHERITED_MEMB = YES
Chris@486 104
Chris@486 105 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
Chris@486 106 # path before files name in the file list and in the header files. If set
Chris@486 107 # to NO the shortest path that makes the file name unique will be used
Chris@486 108
Chris@486 109 FULL_PATH_NAMES = NO
Chris@486 110
Chris@486 111 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
Chris@486 112 # can be used to strip a user-defined part of the path. Stripping is
Chris@486 113 # only done if one of the specified strings matches the left-hand part of
Chris@486 114 # the path. The tag can be used to show relative paths in the file list.
Chris@486 115 # If left blank the directory from which doxygen is run is used as the
Chris@486 116 # path to strip.
Chris@486 117
Chris@486 118 STRIP_FROM_PATH =
Chris@486 119
Chris@486 120 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
Chris@486 121 # the path mentioned in the documentation of a class, which tells
Chris@486 122 # the reader which header file to include in order to use a class.
Chris@486 123 # If left blank only the name of the header file containing the class
Chris@486 124 # definition is used. Otherwise one should specify the include paths that
Chris@486 125 # are normally passed to the compiler using the -I flag.
Chris@486 126
Chris@486 127 STRIP_FROM_INC_PATH =
Chris@486 128
Chris@486 129 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
Chris@486 130 # (but less readable) file names. This can be useful is your file systems
Chris@486 131 # doesn't support long names like on DOS, Mac, or CD-ROM.
Chris@486 132
Chris@486 133 SHORT_NAMES = NO
Chris@486 134
Chris@486 135 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
Chris@486 136 # will interpret the first line (until the first dot) of a JavaDoc-style
Chris@486 137 # comment as the brief description. If set to NO, the JavaDoc
Chris@486 138 # comments will behave just like the Qt-style comments (thus requiring an
Chris@486 139 # explicit @brief command for a brief description.
Chris@486 140
Chris@486 141 JAVADOC_AUTOBRIEF = YES
Chris@486 142
Chris@486 143 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
Chris@486 144 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
Chris@486 145 # comments) as a brief description. This used to be the default behaviour.
Chris@486 146 # The new default is to treat a multi-line C++ comment block as a detailed
Chris@486 147 # description. Set this tag to YES if you prefer the old behaviour instead.
Chris@486 148
Chris@486 149 MULTILINE_CPP_IS_BRIEF = NO
Chris@486 150
Chris@486 151 # If the DETAILS_AT_TOP tag is set to YES then Doxygen
Chris@486 152 # will output the detailed description near the top, like JavaDoc.
Chris@486 153 # If set to NO, the detailed description appears after the member
Chris@486 154 # documentation.
Chris@486 155
Chris@486 156 DETAILS_AT_TOP = YES
Chris@486 157
Chris@486 158 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
Chris@486 159 # member inherits the documentation from any documented member that it
Chris@486 160 # re-implements.
Chris@486 161
Chris@486 162 INHERIT_DOCS = YES
Chris@486 163
Chris@486 164 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
Chris@486 165 # tag is set to YES, then doxygen will reuse the documentation of the first
Chris@486 166 # member in the group (if any) for the other members of the group. By default
Chris@486 167 # all members of a group must be documented explicitly.
Chris@486 168
Chris@486 169 DISTRIBUTE_GROUP_DOC = NO
Chris@486 170
Chris@486 171 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
Chris@486 172 # a new page for each member. If set to NO, the documentation of a member will
Chris@486 173 # be part of the file/class/namespace that contains it.
Chris@486 174
Chris@486 175 SEPARATE_MEMBER_PAGES = NO
Chris@486 176
Chris@486 177 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
Chris@486 178 # Doxygen uses this value to replace tabs by spaces in code fragments.
Chris@486 179
Chris@486 180 TAB_SIZE = 8
Chris@486 181
Chris@486 182 # This tag can be used to specify a number of aliases that acts
Chris@486 183 # as commands in the documentation. An alias has the form "name=value".
Chris@486 184 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
Chris@486 185 # put the command \sideeffect (or @sideeffect) in the documentation, which
Chris@486 186 # will result in a user-defined paragraph with heading "Side Effects:".
Chris@486 187 # You can put \n's in the value part of an alias to insert newlines.
Chris@486 188
Chris@486 189 ALIASES =
Chris@486 190
Chris@486 191 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
Chris@486 192 # sources only. Doxygen will then generate output that is more tailored for C.
Chris@486 193 # For instance, some of the names that are used will be different. The list
Chris@486 194 # of all members will be omitted, etc.
Chris@486 195
Chris@486 196 OPTIMIZE_OUTPUT_FOR_C = NO
Chris@486 197
Chris@486 198 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
Chris@486 199 # only. Doxygen will then generate output that is more tailored for Java.
Chris@486 200 # For instance, namespaces will be presented as packages, qualified scopes
Chris@486 201 # will look different, etc.
Chris@486 202
Chris@486 203 OPTIMIZE_OUTPUT_JAVA = NO
Chris@486 204
Chris@486 205 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
Chris@486 206 # the same type (for instance a group of public functions) to be put as a
Chris@486 207 # subgroup of that type (e.g. under the Public Functions section). Set it to
Chris@486 208 # NO to prevent subgrouping. Alternatively, this can be done per class using
Chris@486 209 # the \nosubgrouping command.
Chris@486 210
Chris@486 211 SUBGROUPING = YES
Chris@486 212
Chris@486 213 #---------------------------------------------------------------------------
Chris@486 214 # Build related configuration options
Chris@486 215 #---------------------------------------------------------------------------
Chris@486 216
Chris@486 217 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
Chris@486 218 # documentation are documented, even if no documentation was available.
Chris@486 219 # Private class members and static file members will be hidden unless
Chris@486 220 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
Chris@486 221
Chris@486 222 EXTRACT_ALL = YES
Chris@486 223
Chris@486 224 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
Chris@486 225 # will be included in the documentation.
Chris@486 226
Chris@486 227 EXTRACT_PRIVATE = YES
Chris@486 228
Chris@486 229 # If the EXTRACT_STATIC tag is set to YES all static members of a file
Chris@486 230 # will be included in the documentation.
Chris@486 231
Chris@486 232 EXTRACT_STATIC = YES
Chris@486 233
Chris@486 234 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
Chris@486 235 # defined locally in source files will be included in the documentation.
Chris@486 236 # If set to NO only classes defined in header files are included.
Chris@486 237
Chris@486 238 EXTRACT_LOCAL_CLASSES = YES
Chris@486 239
Chris@486 240 # This flag is only useful for Objective-C code. When set to YES local
Chris@486 241 # methods, which are defined in the implementation section but not in
Chris@486 242 # the interface are included in the documentation.
Chris@486 243 # If set to NO (the default) only methods in the interface are included.
Chris@486 244
Chris@486 245 EXTRACT_LOCAL_METHODS = NO
Chris@486 246
Chris@486 247 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
Chris@486 248 # undocumented members of documented classes, files or namespaces.
Chris@486 249 # If set to NO (the default) these members will be included in the
Chris@486 250 # various overviews, but no documentation section is generated.
Chris@486 251 # This option has no effect if EXTRACT_ALL is enabled.
Chris@486 252
Chris@486 253 HIDE_UNDOC_MEMBERS = NO
Chris@486 254
Chris@486 255 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
Chris@486 256 # undocumented classes that are normally visible in the class hierarchy.
Chris@486 257 # If set to NO (the default) these classes will be included in the various
Chris@486 258 # overviews. This option has no effect if EXTRACT_ALL is enabled.
Chris@486 259
Chris@486 260 HIDE_UNDOC_CLASSES = NO
Chris@486 261
Chris@486 262 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
Chris@486 263 # friend (class|struct|union) declarations.
Chris@486 264 # If set to NO (the default) these declarations will be included in the
Chris@486 265 # documentation.
Chris@486 266
Chris@486 267 HIDE_FRIEND_COMPOUNDS = NO
Chris@486 268
Chris@486 269 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
Chris@486 270 # documentation blocks found inside the body of a function.
Chris@486 271 # If set to NO (the default) these blocks will be appended to the
Chris@486 272 # function's detailed documentation block.
Chris@486 273
Chris@486 274 HIDE_IN_BODY_DOCS = NO
Chris@486 275
Chris@486 276 # The INTERNAL_DOCS tag determines if documentation
Chris@486 277 # that is typed after a \internal command is included. If the tag is set
Chris@486 278 # to NO (the default) then the documentation will be excluded.
Chris@486 279 # Set it to YES to include the internal documentation.
Chris@486 280
Chris@486 281 INTERNAL_DOCS = NO
Chris@486 282
Chris@486 283 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
Chris@486 284 # file names in lower-case letters. If set to YES upper-case letters are also
Chris@486 285 # allowed. This is useful if you have classes or files whose names only differ
Chris@486 286 # in case and if your file system supports case sensitive file names. Windows
Chris@486 287 # and Mac users are advised to set this option to NO.
Chris@486 288
Chris@486 289 CASE_SENSE_NAMES = YES
Chris@486 290
Chris@486 291 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
Chris@486 292 # will show members with their full class and namespace scopes in the
Chris@486 293 # documentation. If set to YES the scope will be hidden.
Chris@486 294
Chris@486 295 HIDE_SCOPE_NAMES = NO
Chris@486 296
Chris@486 297 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
Chris@486 298 # will put a list of the files that are included by a file in the documentation
Chris@486 299 # of that file.
Chris@486 300
Chris@486 301 SHOW_INCLUDE_FILES = YES
Chris@486 302
Chris@486 303 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
Chris@486 304 # is inserted in the documentation for inline members.
Chris@486 305
Chris@486 306 INLINE_INFO = YES
Chris@486 307
Chris@486 308 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
Chris@486 309 # will sort the (detailed) documentation of file and class members
Chris@486 310 # alphabetically by member name. If set to NO the members will appear in
Chris@486 311 # declaration order.
Chris@486 312
Chris@486 313 SORT_MEMBER_DOCS = NO
Chris@486 314
Chris@486 315 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
Chris@486 316 # brief documentation of file, namespace and class members alphabetically
Chris@486 317 # by member name. If set to NO (the default) the members will appear in
Chris@486 318 # declaration order.
Chris@486 319
Chris@486 320 SORT_BRIEF_DOCS = NO
Chris@486 321
Chris@486 322 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
Chris@486 323 # sorted by fully-qualified names, including namespaces. If set to
Chris@486 324 # NO (the default), the class list will be sorted only by class name,
Chris@486 325 # not including the namespace part.
Chris@486 326 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
Chris@486 327 # Note: This option applies only to the class list, not to the
Chris@486 328 # alphabetical list.
Chris@486 329
Chris@486 330 SORT_BY_SCOPE_NAME = NO
Chris@486 331
Chris@486 332 # The GENERATE_TODOLIST tag can be used to enable (YES) or
Chris@486 333 # disable (NO) the todo list. This list is created by putting \todo
Chris@486 334 # commands in the documentation.
Chris@486 335
Chris@486 336 GENERATE_TODOLIST = YES
Chris@486 337
Chris@486 338 # The GENERATE_TESTLIST tag can be used to enable (YES) or
Chris@486 339 # disable (NO) the test list. This list is created by putting \test
Chris@486 340 # commands in the documentation.
Chris@486 341
Chris@486 342 GENERATE_TESTLIST = YES
Chris@486 343
Chris@486 344 # The GENERATE_BUGLIST tag can be used to enable (YES) or
Chris@486 345 # disable (NO) the bug list. This list is created by putting \bug
Chris@486 346 # commands in the documentation.
Chris@486 347
Chris@486 348 GENERATE_BUGLIST = YES
Chris@486 349
Chris@486 350 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
Chris@486 351 # disable (NO) the deprecated list. This list is created by putting
Chris@486 352 # \deprecated commands in the documentation.
Chris@486 353
Chris@486 354 GENERATE_DEPRECATEDLIST= YES
Chris@486 355
Chris@486 356 # The ENABLED_SECTIONS tag can be used to enable conditional
Chris@486 357 # documentation sections, marked by \if sectionname ... \endif.
Chris@486 358
Chris@486 359 ENABLED_SECTIONS =
Chris@486 360
Chris@486 361 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
Chris@486 362 # the initial value of a variable or define consists of for it to appear in
Chris@486 363 # the documentation. If the initializer consists of more lines than specified
Chris@486 364 # here it will be hidden. Use a value of 0 to hide initializers completely.
Chris@486 365 # The appearance of the initializer of individual variables and defines in the
Chris@486 366 # documentation can be controlled using \showinitializer or \hideinitializer
Chris@486 367 # command in the documentation regardless of this setting.
Chris@486 368
Chris@486 369 MAX_INITIALIZER_LINES = 30
Chris@486 370
Chris@486 371 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
Chris@486 372 # at the bottom of the documentation of classes and structs. If set to YES the
Chris@486 373 # list will mention the files that were used to generate the documentation.
Chris@486 374
Chris@486 375 SHOW_USED_FILES = YES
Chris@486 376
Chris@486 377 # If the sources in your project are distributed over multiple directories
Chris@486 378 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
Chris@486 379 # in the documentation. The default is YES.
Chris@486 380
Chris@486 381 SHOW_DIRECTORIES = YES
Chris@486 382
Chris@486 383 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
Chris@486 384 # doxygen should invoke to get the current version for each file (typically from the
Chris@486 385 # version control system). Doxygen will invoke the program by executing (via
Chris@486 386 # popen()) the command <command> <input-file>, where <command> is the value of
Chris@486 387 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
Chris@486 388 # provided by doxygen. Whatever the progam writes to standard output
Chris@486 389 # is used as the file version. See the manual for examples.
Chris@486 390
Chris@486 391 FILE_VERSION_FILTER =
Chris@486 392
Chris@486 393 #---------------------------------------------------------------------------
Chris@486 394 # configuration options related to warning and progress messages
Chris@486 395 #---------------------------------------------------------------------------
Chris@486 396
Chris@486 397 # The QUIET tag can be used to turn on/off the messages that are generated
Chris@486 398 # by doxygen. Possible values are YES and NO. If left blank NO is used.
Chris@486 399
Chris@486 400 QUIET = NO
Chris@486 401
Chris@486 402 # The WARNINGS tag can be used to turn on/off the warning messages that are
Chris@486 403 # generated by doxygen. Possible values are YES and NO. If left blank
Chris@486 404 # NO is used.
Chris@486 405
Chris@486 406 WARNINGS = YES
Chris@486 407
Chris@486 408 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
Chris@486 409 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
Chris@486 410 # automatically be disabled.
Chris@486 411
Chris@486 412 WARN_IF_UNDOCUMENTED = YES
Chris@486 413
Chris@486 414 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
Chris@486 415 # potential errors in the documentation, such as not documenting some
Chris@486 416 # parameters in a documented function, or documenting parameters that
Chris@486 417 # don't exist or using markup commands wrongly.
Chris@486 418
Chris@486 419 WARN_IF_DOC_ERROR = YES
Chris@486 420
Chris@486 421 # This WARN_NO_PARAMDOC option can be abled to get warnings for
Chris@486 422 # functions that are documented, but have no documentation for their parameters
Chris@486 423 # or return value. If set to NO (the default) doxygen will only warn about
Chris@486 424 # wrong or incomplete parameter documentation, but not about the absence of
Chris@486 425 # documentation.
Chris@486 426
Chris@486 427 WARN_NO_PARAMDOC = YES
Chris@486 428
Chris@486 429 # The WARN_FORMAT tag determines the format of the warning messages that
Chris@486 430 # doxygen can produce. The string should contain the $file, $line, and $text
Chris@486 431 # tags, which will be replaced by the file and line number from which the
Chris@486 432 # warning originated and the warning text. Optionally the format may contain
Chris@486 433 # $version, which will be replaced by the version of the file (if it could
Chris@486 434 # be obtained via FILE_VERSION_FILTER)
Chris@486 435
Chris@486 436 WARN_FORMAT = "$file:$line: $text"
Chris@486 437
Chris@486 438 # The WARN_LOGFILE tag can be used to specify a file to which warning
Chris@486 439 # and error messages should be written. If left blank the output is written
Chris@486 440 # to stderr.
Chris@486 441
Chris@486 442 WARN_LOGFILE = docs/doxygen/warning.log
Chris@486 443
Chris@486 444 #---------------------------------------------------------------------------
Chris@486 445 # configuration options related to the input files
Chris@486 446 #---------------------------------------------------------------------------
Chris@486 447
Chris@486 448 # The INPUT tag can be used to specify the files and/or directories that contain
Chris@486 449 # documented source files. You may enter file names like "myfile.cpp" or
Chris@486 450 # directories like "/usr/src/myproject". Separate the files or directories
Chris@486 451 # with spaces.
Chris@486 452
Chris@486 453 INPUT = main
Chris@486 454
Chris@486 455 # If the value of the INPUT tag contains directories, you can use the
Chris@486 456 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
Chris@486 457 # and *.h) to filter out the source-files in the directories. If left
Chris@486 458 # blank the following patterns are tested:
Chris@486 459 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
Chris@486 460 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
Chris@486 461
Chris@486 462 FILE_PATTERNS = *.h \
Chris@486 463 *.C \
Chris@486 464 *.cpp \
Chris@486 465 *.cc
Chris@486 466
Chris@486 467 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
Chris@486 468 # should be searched for input files as well. Possible values are YES and NO.
Chris@486 469 # If left blank NO is used.
Chris@486 470
Chris@486 471 RECURSIVE = NO
Chris@486 472
Chris@486 473 # The EXCLUDE tag can be used to specify files and/or directories that should
Chris@486 474 # excluded from the INPUT source files. This way you can easily exclude a
Chris@486 475 # subdirectory from a directory tree whose root is specified with the INPUT tag.
Chris@486 476
Chris@486 477 EXCLUDE =
Chris@486 478
Chris@486 479 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
Chris@486 480 # directories that are symbolic links (a Unix filesystem feature) are excluded
Chris@486 481 # from the input.
Chris@486 482
Chris@486 483 EXCLUDE_SYMLINKS = NO
Chris@486 484
Chris@486 485 # If the value of the INPUT tag contains directories, you can use the
Chris@486 486 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
Chris@486 487 # certain files from those directories. Note that the wildcards are matched
Chris@486 488 # against the file with absolute path, so to exclude all test directories
Chris@486 489 # for example use the pattern */test/*
Chris@486 490
Chris@486 491 EXCLUDE_PATTERNS = qrc_*.cpp \
Chris@486 492 moc_*.cpp \
Chris@486 493 *.moc.cpp \
Chris@486 494 *_skel.cpp
Chris@486 495
Chris@486 496 # The EXAMPLE_PATH tag can be used to specify one or more files or
Chris@486 497 # directories that contain example code fragments that are included (see
Chris@486 498 # the \include command).
Chris@486 499
Chris@486 500 EXAMPLE_PATH =
Chris@486 501
Chris@486 502 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
Chris@486 503 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
Chris@486 504 # and *.h) to filter out the source-files in the directories. If left
Chris@486 505 # blank all files are included.
Chris@486 506
Chris@486 507 EXAMPLE_PATTERNS =
Chris@486 508
Chris@486 509 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
Chris@486 510 # searched for input files to be used with the \include or \dontinclude
Chris@486 511 # commands irrespective of the value of the RECURSIVE tag.
Chris@486 512 # Possible values are YES and NO. If left blank NO is used.
Chris@486 513
Chris@486 514 EXAMPLE_RECURSIVE = NO
Chris@486 515
Chris@486 516 # The IMAGE_PATH tag can be used to specify one or more files or
Chris@486 517 # directories that contain image that are included in the documentation (see
Chris@486 518 # the \image command).
Chris@486 519
Chris@486 520 IMAGE_PATH =
Chris@486 521
Chris@486 522 # The INPUT_FILTER tag can be used to specify a program that doxygen should
Chris@486 523 # invoke to filter for each input file. Doxygen will invoke the filter program
Chris@486 524 # by executing (via popen()) the command <filter> <input-file>, where <filter>
Chris@486 525 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
Chris@486 526 # input file. Doxygen will then use the output that the filter program writes
Chris@486 527 # to standard output. If FILTER_PATTERNS is specified, this tag will be
Chris@486 528 # ignored.
Chris@486 529
Chris@486 530 INPUT_FILTER =
Chris@486 531
Chris@486 532 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
Chris@486 533 # basis. Doxygen will compare the file name with each pattern and apply the
Chris@486 534 # filter if there is a match. The filters are a list of the form:
Chris@486 535 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
Chris@486 536 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
Chris@486 537 # is applied to all files.
Chris@486 538
Chris@486 539 FILTER_PATTERNS =
Chris@486 540
Chris@486 541 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
Chris@486 542 # INPUT_FILTER) will be used to filter the input files when producing source
Chris@486 543 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
Chris@486 544
Chris@486 545 FILTER_SOURCE_FILES = NO
Chris@486 546
Chris@486 547 #---------------------------------------------------------------------------
Chris@486 548 # configuration options related to source browsing
Chris@486 549 #---------------------------------------------------------------------------
Chris@486 550
Chris@486 551 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
Chris@486 552 # be generated. Documented entities will be cross-referenced with these sources.
Chris@486 553 # Note: To get rid of all source code in the generated output, make sure also
Chris@486 554 # VERBATIM_HEADERS is set to NO.
Chris@486 555
Chris@486 556 SOURCE_BROWSER = YES
Chris@486 557
Chris@486 558 # Setting the INLINE_SOURCES tag to YES will include the body
Chris@486 559 # of functions and classes directly in the documentation.
Chris@486 560
Chris@486 561 INLINE_SOURCES = NO
Chris@486 562
Chris@486 563 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
Chris@486 564 # doxygen to hide any special comment blocks from generated source code
Chris@486 565 # fragments. Normal C and C++ comments will always remain visible.
Chris@486 566
Chris@486 567 STRIP_CODE_COMMENTS = YES
Chris@486 568
Chris@486 569 # If the REFERENCED_BY_RELATION tag is set to YES (the default)
Chris@486 570 # then for each documented function all documented
Chris@486 571 # functions referencing it will be listed.
Chris@486 572
Chris@486 573 REFERENCED_BY_RELATION = YES
Chris@486 574
Chris@486 575 # If the REFERENCES_RELATION tag is set to YES (the default)
Chris@486 576 # then for each documented function all documented entities
Chris@486 577 # called/used by that function will be listed.
Chris@486 578
Chris@486 579 REFERENCES_RELATION = YES
Chris@486 580
Chris@486 581 # If the USE_HTAGS tag is set to YES then the references to source code
Chris@486 582 # will point to the HTML generated by the htags(1) tool instead of doxygen
Chris@486 583 # built-in source browser. The htags tool is part of GNU's global source
Chris@486 584 # tagging system (see http://www.gnu.org/software/global/global.html). You
Chris@486 585 # will need version 4.8.6 or higher.
Chris@486 586
Chris@486 587 #USE_HTAGS = NO
Chris@486 588
Chris@486 589 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
Chris@486 590 # will generate a verbatim copy of the header file for each class for
Chris@486 591 # which an include is specified. Set to NO to disable this.
Chris@486 592
Chris@486 593 VERBATIM_HEADERS = YES
Chris@486 594
Chris@486 595 #---------------------------------------------------------------------------
Chris@486 596 # configuration options related to the alphabetical class index
Chris@486 597 #---------------------------------------------------------------------------
Chris@486 598
Chris@486 599 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
Chris@486 600 # of all compounds will be generated. Enable this if the project
Chris@486 601 # contains a lot of classes, structs, unions or interfaces.
Chris@486 602
Chris@486 603 ALPHABETICAL_INDEX = YES
Chris@486 604
Chris@486 605 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
Chris@486 606 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
Chris@486 607 # in which this list will be split (can be a number in the range [1..20])
Chris@486 608
Chris@486 609 COLS_IN_ALPHA_INDEX = 3
Chris@486 610
Chris@486 611 # In case all classes in a project start with a common prefix, all
Chris@486 612 # classes will be put under the same header in the alphabetical index.
Chris@486 613 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
Chris@486 614 # should be ignored while generating the index headers.
Chris@486 615
Chris@486 616 IGNORE_PREFIX =
Chris@486 617
Chris@486 618 #---------------------------------------------------------------------------
Chris@486 619 # configuration options related to the HTML output
Chris@486 620 #---------------------------------------------------------------------------
Chris@486 621
Chris@486 622 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
Chris@486 623 # generate HTML output.
Chris@486 624
Chris@486 625 GENERATE_HTML = YES
Chris@486 626
Chris@486 627 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
Chris@486 628 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
Chris@486 629 # put in front of it. If left blank `html' will be used as the default path.
Chris@486 630
Chris@486 631 HTML_OUTPUT = html
Chris@486 632
Chris@486 633 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
Chris@486 634 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
Chris@486 635 # doxygen will generate files with .html extension.
Chris@486 636
Chris@486 637 HTML_FILE_EXTENSION = .html
Chris@486 638
Chris@486 639 # The HTML_HEADER tag can be used to specify a personal HTML header for
Chris@486 640 # each generated HTML page. If it is left blank doxygen will generate a
Chris@486 641 # standard header.
Chris@486 642
Chris@486 643 HTML_HEADER =
Chris@486 644
Chris@486 645 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
Chris@486 646 # each generated HTML page. If it is left blank doxygen will generate a
Chris@486 647 # standard footer.
Chris@486 648
Chris@486 649 HTML_FOOTER =
Chris@486 650
Chris@486 651 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
Chris@486 652 # style sheet that is used by each HTML page. It can be used to
Chris@486 653 # fine-tune the look of the HTML output. If the tag is left blank doxygen
Chris@486 654 # will generate a default style sheet. Note that doxygen will try to copy
Chris@486 655 # the style sheet file to the HTML output directory, so don't put your own
Chris@486 656 # stylesheet in the HTML output directory as well, or it will be erased!
Chris@486 657
Chris@486 658 HTML_STYLESHEET =
Chris@486 659
Chris@486 660 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
Chris@486 661 # files or namespaces will be aligned in HTML using tables. If set to
Chris@486 662 # NO a bullet list will be used.
Chris@486 663
Chris@486 664 HTML_ALIGN_MEMBERS = YES
Chris@486 665
Chris@486 666 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
Chris@486 667 # will be generated that can be used as input for tools like the
Chris@486 668 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
Chris@486 669 # of the generated HTML documentation.
Chris@486 670
Chris@486 671 GENERATE_HTMLHELP = NO
Chris@486 672
Chris@486 673 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
Chris@486 674 # be used to specify the file name of the resulting .chm file. You
Chris@486 675 # can add a path in front of the file if the result should not be
Chris@486 676 # written to the html output directory.
Chris@486 677
Chris@486 678 CHM_FILE =
Chris@486 679
Chris@486 680 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
Chris@486 681 # be used to specify the location (absolute path including file name) of
Chris@486 682 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
Chris@486 683 # the HTML help compiler on the generated index.hhp.
Chris@486 684
Chris@486 685 HHC_LOCATION =
Chris@486 686
Chris@486 687 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
Chris@486 688 # controls if a separate .chi index file is generated (YES) or that
Chris@486 689 # it should be included in the master .chm file (NO).
Chris@486 690
Chris@486 691 GENERATE_CHI = NO
Chris@486 692
Chris@486 693 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
Chris@486 694 # controls whether a binary table of contents is generated (YES) or a
Chris@486 695 # normal table of contents (NO) in the .chm file.
Chris@486 696
Chris@486 697 BINARY_TOC = NO
Chris@486 698
Chris@486 699 # The TOC_EXPAND flag can be set to YES to add extra items for group members
Chris@486 700 # to the contents of the HTML help documentation and to the tree view.
Chris@486 701
Chris@486 702 TOC_EXPAND = NO
Chris@486 703
Chris@486 704 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
Chris@486 705 # top of each HTML page. The value NO (the default) enables the index and
Chris@486 706 # the value YES disables it.
Chris@486 707
Chris@486 708 DISABLE_INDEX = NO
Chris@486 709
Chris@486 710 # This tag can be used to set the number of enum values (range [1..20])
Chris@486 711 # that doxygen will group on one line in the generated HTML documentation.
Chris@486 712
Chris@486 713 ENUM_VALUES_PER_LINE = 4
Chris@486 714
Chris@486 715 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
Chris@486 716 # generated containing a tree-like index structure (just like the one that
Chris@486 717 # is generated for HTML Help). For this to work a browser that supports
Chris@486 718 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
Chris@486 719 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
Chris@486 720 # probably better off using the HTML help feature.
Chris@486 721
Chris@486 722 GENERATE_TREEVIEW = YES
Chris@486 723
Chris@486 724 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
Chris@486 725 # used to set the initial width (in pixels) of the frame in which the tree
Chris@486 726 # is shown.
Chris@486 727
Chris@486 728 TREEVIEW_WIDTH = 250
Chris@486 729
Chris@486 730 #---------------------------------------------------------------------------
Chris@486 731 # configuration options related to the LaTeX output
Chris@486 732 #---------------------------------------------------------------------------
Chris@486 733
Chris@486 734 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
Chris@486 735 # generate Latex output.
Chris@486 736
Chris@486 737 GENERATE_LATEX = NO
Chris@486 738
Chris@486 739 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
Chris@486 740 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
Chris@486 741 # put in front of it. If left blank `latex' will be used as the default path.
Chris@486 742
Chris@486 743 LATEX_OUTPUT = latex
Chris@486 744
Chris@486 745 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
Chris@486 746 # invoked. If left blank `latex' will be used as the default command name.
Chris@486 747
Chris@486 748 LATEX_CMD_NAME = latex
Chris@486 749
Chris@486 750 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
Chris@486 751 # generate index for LaTeX. If left blank `makeindex' will be used as the
Chris@486 752 # default command name.
Chris@486 753
Chris@486 754 MAKEINDEX_CMD_NAME = makeindex
Chris@486 755
Chris@486 756 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
Chris@486 757 # LaTeX documents. This may be useful for small projects and may help to
Chris@486 758 # save some trees in general.
Chris@486 759
Chris@486 760 COMPACT_LATEX = NO
Chris@486 761
Chris@486 762 # The PAPER_TYPE tag can be used to set the paper type that is used
Chris@486 763 # by the printer. Possible values are: a4, a4wide, letter, legal and
Chris@486 764 # executive. If left blank a4wide will be used.
Chris@486 765
Chris@486 766 PAPER_TYPE = a4wide
Chris@486 767
Chris@486 768 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
Chris@486 769 # packages that should be included in the LaTeX output.
Chris@486 770
Chris@486 771 EXTRA_PACKAGES =
Chris@486 772
Chris@486 773 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
Chris@486 774 # the generated latex document. The header should contain everything until
Chris@486 775 # the first chapter. If it is left blank doxygen will generate a
Chris@486 776 # standard header. Notice: only use this tag if you know what you are doing!
Chris@486 777
Chris@486 778 LATEX_HEADER =
Chris@486 779
Chris@486 780 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
Chris@486 781 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
Chris@486 782 # contain links (just like the HTML output) instead of page references
Chris@486 783 # This makes the output suitable for online browsing using a pdf viewer.
Chris@486 784
Chris@486 785 PDF_HYPERLINKS = NO
Chris@486 786
Chris@486 787 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
Chris@486 788 # plain latex in the generated Makefile. Set this option to YES to get a
Chris@486 789 # higher quality PDF documentation.
Chris@486 790
Chris@486 791 USE_PDFLATEX = NO
Chris@486 792
Chris@486 793 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
Chris@486 794 # command to the generated LaTeX files. This will instruct LaTeX to keep
Chris@486 795 # running if errors occur, instead of asking the user for help.
Chris@486 796 # This option is also used when generating formulas in HTML.
Chris@486 797
Chris@486 798 LATEX_BATCHMODE = NO
Chris@486 799
Chris@486 800 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
Chris@486 801 # include the index chapters (such as File Index, Compound Index, etc.)
Chris@486 802 # in the output.
Chris@486 803
Chris@486 804 LATEX_HIDE_INDICES = NO
Chris@486 805
Chris@486 806 #---------------------------------------------------------------------------
Chris@486 807 # configuration options related to the RTF output
Chris@486 808 #---------------------------------------------------------------------------
Chris@486 809
Chris@486 810 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
Chris@486 811 # The RTF output is optimized for Word 97 and may not look very pretty with
Chris@486 812 # other RTF readers or editors.
Chris@486 813
Chris@486 814 GENERATE_RTF = NO
Chris@486 815
Chris@486 816 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
Chris@486 817 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
Chris@486 818 # put in front of it. If left blank `rtf' will be used as the default path.
Chris@486 819
Chris@486 820 RTF_OUTPUT = rtf
Chris@486 821
Chris@486 822 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
Chris@486 823 # RTF documents. This may be useful for small projects and may help to
Chris@486 824 # save some trees in general.
Chris@486 825
Chris@486 826 COMPACT_RTF = NO
Chris@486 827
Chris@486 828 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
Chris@486 829 # will contain hyperlink fields. The RTF file will
Chris@486 830 # contain links (just like the HTML output) instead of page references.
Chris@486 831 # This makes the output suitable for online browsing using WORD or other
Chris@486 832 # programs which support those fields.
Chris@486 833 # Note: wordpad (write) and others do not support links.
Chris@486 834
Chris@486 835 RTF_HYPERLINKS = NO
Chris@486 836
Chris@486 837 # Load stylesheet definitions from file. Syntax is similar to doxygen's
Chris@486 838 # config file, i.e. a series of assignments. You only have to provide
Chris@486 839 # replacements, missing definitions are set to their default value.
Chris@486 840
Chris@486 841 RTF_STYLESHEET_FILE =
Chris@486 842
Chris@486 843 # Set optional variables used in the generation of an rtf document.
Chris@486 844 # Syntax is similar to doxygen's config file.
Chris@486 845
Chris@486 846 RTF_EXTENSIONS_FILE =
Chris@486 847
Chris@486 848 #---------------------------------------------------------------------------
Chris@486 849 # configuration options related to the man page output
Chris@486 850 #---------------------------------------------------------------------------
Chris@486 851
Chris@486 852 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
Chris@486 853 # generate man pages
Chris@486 854
Chris@486 855 GENERATE_MAN = NO
Chris@486 856
Chris@486 857 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
Chris@486 858 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
Chris@486 859 # put in front of it. If left blank `man' will be used as the default path.
Chris@486 860
Chris@486 861 MAN_OUTPUT = man
Chris@486 862
Chris@486 863 # The MAN_EXTENSION tag determines the extension that is added to
Chris@486 864 # the generated man pages (default is the subroutine's section .3)
Chris@486 865
Chris@486 866 MAN_EXTENSION = .3
Chris@486 867
Chris@486 868 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
Chris@486 869 # then it will generate one additional man file for each entity
Chris@486 870 # documented in the real man page(s). These additional files
Chris@486 871 # only source the real man page, but without them the man command
Chris@486 872 # would be unable to find the correct page. The default is NO.
Chris@486 873
Chris@486 874 MAN_LINKS = NO
Chris@486 875
Chris@486 876 #---------------------------------------------------------------------------
Chris@486 877 # configuration options related to the XML output
Chris@486 878 #---------------------------------------------------------------------------
Chris@486 879
Chris@486 880 # If the GENERATE_XML tag is set to YES Doxygen will
Chris@486 881 # generate an XML file that captures the structure of
Chris@486 882 # the code including all documentation.
Chris@486 883
Chris@486 884 GENERATE_XML = NO
Chris@486 885
Chris@486 886 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
Chris@486 887 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
Chris@486 888 # put in front of it. If left blank `xml' will be used as the default path.
Chris@486 889
Chris@486 890 XML_OUTPUT = xml
Chris@486 891
Chris@486 892 # The XML_SCHEMA tag can be used to specify an XML schema,
Chris@486 893 # which can be used by a validating XML parser to check the
Chris@486 894 # syntax of the XML files.
Chris@486 895
Chris@486 896 XML_SCHEMA =
Chris@486 897
Chris@486 898 # The XML_DTD tag can be used to specify an XML DTD,
Chris@486 899 # which can be used by a validating XML parser to check the
Chris@486 900 # syntax of the XML files.
Chris@486 901
Chris@486 902 XML_DTD =
Chris@486 903
Chris@486 904 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
Chris@486 905 # dump the program listings (including syntax highlighting
Chris@486 906 # and cross-referencing information) to the XML output. Note that
Chris@486 907 # enabling this will significantly increase the size of the XML output.
Chris@486 908
Chris@486 909 XML_PROGRAMLISTING = YES
Chris@486 910
Chris@486 911 #---------------------------------------------------------------------------
Chris@486 912 # configuration options for the AutoGen Definitions output
Chris@486 913 #---------------------------------------------------------------------------
Chris@486 914
Chris@486 915 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
Chris@486 916 # generate an AutoGen Definitions (see autogen.sf.net) file
Chris@486 917 # that captures the structure of the code including all
Chris@486 918 # documentation. Note that this feature is still experimental
Chris@486 919 # and incomplete at the moment.
Chris@486 920
Chris@486 921 GENERATE_AUTOGEN_DEF = NO
Chris@486 922
Chris@486 923 #---------------------------------------------------------------------------
Chris@486 924 # configuration options related to the Perl module output
Chris@486 925 #---------------------------------------------------------------------------
Chris@486 926
Chris@486 927 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
Chris@486 928 # generate a Perl module file that captures the structure of
Chris@486 929 # the code including all documentation. Note that this
Chris@486 930 # feature is still experimental and incomplete at the
Chris@486 931 # moment.
Chris@486 932
Chris@486 933 GENERATE_PERLMOD = NO
Chris@486 934
Chris@486 935 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
Chris@486 936 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
Chris@486 937 # to generate PDF and DVI output from the Perl module output.
Chris@486 938
Chris@486 939 PERLMOD_LATEX = NO
Chris@486 940
Chris@486 941 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
Chris@486 942 # nicely formatted so it can be parsed by a human reader. This is useful
Chris@486 943 # if you want to understand what is going on. On the other hand, if this
Chris@486 944 # tag is set to NO the size of the Perl module output will be much smaller
Chris@486 945 # and Perl will parse it just the same.
Chris@486 946
Chris@486 947 PERLMOD_PRETTY = YES
Chris@486 948
Chris@486 949 # The names of the make variables in the generated doxyrules.make file
Chris@486 950 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
Chris@486 951 # This is useful so different doxyrules.make files included by the same
Chris@486 952 # Makefile don't overwrite each other's variables.
Chris@486 953
Chris@486 954 PERLMOD_MAKEVAR_PREFIX =
Chris@486 955
Chris@486 956 #---------------------------------------------------------------------------
Chris@486 957 # Configuration options related to the preprocessor
Chris@486 958 #---------------------------------------------------------------------------
Chris@486 959
Chris@486 960 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
Chris@486 961 # evaluate all C-preprocessor directives found in the sources and include
Chris@486 962 # files.
Chris@486 963
Chris@486 964 ENABLE_PREPROCESSING = YES
Chris@486 965
Chris@486 966 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
Chris@486 967 # names in the source code. If set to NO (the default) only conditional
Chris@486 968 # compilation will be performed. Macro expansion can be done in a controlled
Chris@486 969 # way by setting EXPAND_ONLY_PREDEF to YES.
Chris@486 970
Chris@486 971 MACRO_EXPANSION = NO
Chris@486 972
Chris@486 973 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
Chris@486 974 # then the macro expansion is limited to the macros specified with the
Chris@486 975 # PREDEFINED and EXPAND_AS_PREDEFINED tags.
Chris@486 976
Chris@486 977 EXPAND_ONLY_PREDEF = NO
Chris@486 978
Chris@486 979 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
Chris@486 980 # in the INCLUDE_PATH (see below) will be search if a #include is found.
Chris@486 981
Chris@486 982 SEARCH_INCLUDES = YES
Chris@486 983
Chris@486 984 # The INCLUDE_PATH tag can be used to specify one or more directories that
Chris@486 985 # contain include files that are not input files but should be processed by
Chris@486 986 # the preprocessor.
Chris@486 987
Chris@487 988 INCLUDE_PATH =
Chris@486 989
Chris@486 990 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
Chris@486 991 # patterns (like *.h and *.hpp) to filter out the header-files in the
Chris@486 992 # directories. If left blank, the patterns specified with FILE_PATTERNS will
Chris@486 993 # be used.
Chris@486 994
Chris@486 995 INCLUDE_FILE_PATTERNS = Q* *.h
Chris@486 996
Chris@486 997 # The PREDEFINED tag can be used to specify one or more macro names that
Chris@486 998 # are defined before the preprocessor is started (similar to the -D option of
Chris@486 999 # gcc). The argument of the tag is a list of macros of the form: name
Chris@486 1000 # or name=definition (no spaces). If the definition and the = are
Chris@486 1001 # omitted =1 is assumed. To prevent a macro definition from being
Chris@486 1002 # undefined via #undef or recursively expanded use the := operator
Chris@486 1003 # instead of the = operator.
Chris@486 1004
Chris@486 1005 PREDEFINED = HAVE_FFTW3F HAVE_FISHSOUND HAVE_JACK HAVE_LIBLO HAVE_LRDF HAVE_MAD HAVE_OGGZ HAVE_PORTAUDIO HAVE_SAMPLERATE HAVE_SNDFILE HAVE_VAMP
Chris@486 1006
Chris@486 1007 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
Chris@486 1008 # this tag can be used to specify a list of macro names that should be expanded.
Chris@486 1009 # The macro definition that is found in the sources will be used.
Chris@486 1010 # Use the PREDEFINED tag if you want to use a different macro definition.
Chris@486 1011
Chris@486 1012 EXPAND_AS_DEFINED =
Chris@486 1013
Chris@486 1014 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
Chris@486 1015 # doxygen's preprocessor will remove all function-like macros that are alone
Chris@486 1016 # on a line, have an all uppercase name, and do not end with a semicolon. Such
Chris@486 1017 # function macros are typically used for boiler-plate code, and will confuse
Chris@486 1018 # the parser if not removed.
Chris@486 1019
Chris@486 1020 SKIP_FUNCTION_MACROS = YES
Chris@486 1021
Chris@486 1022 #---------------------------------------------------------------------------
Chris@486 1023 # Configuration::additions related to external references
Chris@486 1024 #---------------------------------------------------------------------------
Chris@486 1025
Chris@486 1026 # The TAGFILES option can be used to specify one or more tagfiles.
Chris@486 1027 # Optionally an initial location of the external documentation
Chris@486 1028 # can be added for each tagfile. The format of a tag file without
Chris@486 1029 # this location is as follows:
Chris@486 1030 # TAGFILES = file1 file2 ...
Chris@486 1031 # Adding location for the tag files is done as follows:
Chris@486 1032 # TAGFILES = file1=loc1 "file2 = loc2" ...
Chris@486 1033 # where "loc1" and "loc2" can be relative or absolute paths or
Chris@486 1034 # URLs. If a location is present for each tag, the installdox tool
Chris@486 1035 # does not have to be run to correct the links.
Chris@486 1036 # Note that each tag file must have a unique name
Chris@486 1037 # (where the name does NOT include the path)
Chris@486 1038 # If a tag file is not located in the directory in which doxygen
Chris@486 1039 # is run, you must also specify the path to the tagfile here.
Chris@486 1040
Chris@486 1041 TAGFILES =
Chris@486 1042
Chris@486 1043 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
Chris@486 1044 # a tag file that is based on the input files it reads.
Chris@486 1045
Chris@486 1046 GENERATE_TAGFILE =
Chris@486 1047
Chris@486 1048 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
Chris@486 1049 # in the class index. If set to NO only the inherited external classes
Chris@486 1050 # will be listed.
Chris@486 1051
Chris@486 1052 ALLEXTERNALS = NO
Chris@486 1053
Chris@486 1054 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
Chris@486 1055 # in the modules index. If set to NO, only the current project's groups will
Chris@486 1056 # be listed.
Chris@486 1057
Chris@486 1058 EXTERNAL_GROUPS = YES
Chris@486 1059
Chris@486 1060 # The PERL_PATH should be the absolute path and name of the perl script
Chris@486 1061 # interpreter (i.e. the result of `which perl').
Chris@486 1062
Chris@486 1063 PERL_PATH = /usr/bin/perl
Chris@486 1064
Chris@486 1065 #---------------------------------------------------------------------------
Chris@486 1066 # Configuration options related to the dot tool
Chris@486 1067 #---------------------------------------------------------------------------
Chris@486 1068
Chris@486 1069 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
Chris@486 1070 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
Chris@486 1071 # or super classes. Setting the tag to NO turns the diagrams off. Note that
Chris@486 1072 # this option is superseded by the HAVE_DOT option below. This is only a
Chris@486 1073 # fallback. It is recommended to install and use dot, since it yields more
Chris@486 1074 # powerful graphs.
Chris@486 1075
Chris@486 1076 CLASS_DIAGRAMS = NO
Chris@486 1077
Chris@486 1078 # If set to YES, the inheritance and collaboration graphs will hide
Chris@486 1079 # inheritance and usage relations if the target is undocumented
Chris@486 1080 # or is not a class.
Chris@486 1081
Chris@486 1082 HIDE_UNDOC_RELATIONS = YES
Chris@486 1083
Chris@486 1084 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
Chris@486 1085 # available from the path. This tool is part of Graphviz, a graph visualization
Chris@486 1086 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
Chris@486 1087 # have no effect if this option is set to NO (the default)
Chris@486 1088
Chris@486 1089 HAVE_DOT = YES
Chris@486 1090
Chris@486 1091 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
Chris@486 1092 # will generate a graph for each documented class showing the direct and
Chris@486 1093 # indirect inheritance relations. Setting this tag to YES will force the
Chris@486 1094 # the CLASS_DIAGRAMS tag to NO.
Chris@486 1095
Chris@486 1096 CLASS_GRAPH = YES
Chris@486 1097
Chris@486 1098 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
Chris@486 1099 # will generate a graph for each documented class showing the direct and
Chris@486 1100 # indirect implementation dependencies (inheritance, containment, and
Chris@486 1101 # class references variables) of the class with other documented classes.
Chris@486 1102
Chris@486 1103 COLLABORATION_GRAPH = YES
Chris@486 1104
Chris@486 1105 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
Chris@486 1106 # will generate a graph for groups, showing the direct groups dependencies
Chris@486 1107
Chris@486 1108 GROUP_GRAPHS = YES
Chris@486 1109
Chris@486 1110 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
Chris@486 1111 # collaboration diagrams in a style similar to the OMG's Unified Modeling
Chris@486 1112 # Language.
Chris@486 1113
Chris@486 1114 UML_LOOK = NO
Chris@486 1115
Chris@486 1116 # If set to YES, the inheritance and collaboration graphs will show the
Chris@486 1117 # relations between templates and their instances.
Chris@486 1118
Chris@486 1119 TEMPLATE_RELATIONS = NO
Chris@486 1120
Chris@486 1121 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
Chris@486 1122 # tags are set to YES then doxygen will generate a graph for each documented
Chris@486 1123 # file showing the direct and indirect include dependencies of the file with
Chris@486 1124 # other documented files.
Chris@486 1125
Chris@486 1126 INCLUDE_GRAPH = YES
Chris@486 1127
Chris@486 1128 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
Chris@486 1129 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
Chris@486 1130 # documented header file showing the documented files that directly or
Chris@486 1131 # indirectly include this file.
Chris@486 1132
Chris@486 1133 INCLUDED_BY_GRAPH = YES
Chris@486 1134
Chris@486 1135 # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
Chris@486 1136 # generate a call dependency graph for every global function or class method.
Chris@486 1137 # Note that enabling this option will significantly increase the time of a run.
Chris@486 1138 # So in most cases it will be better to enable call graphs for selected
Chris@486 1139 # functions only using the \callgraph command.
Chris@486 1140
Chris@486 1141 CALL_GRAPH = NO
Chris@486 1142
Chris@486 1143 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
Chris@486 1144 # will graphical hierarchy of all classes instead of a textual one.
Chris@486 1145
Chris@486 1146 GRAPHICAL_HIERARCHY = YES
Chris@486 1147
Chris@486 1148 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
Chris@486 1149 # then doxygen will show the dependencies a directory has on other directories
Chris@486 1150 # in a graphical way. The dependency relations are determined by the #include
Chris@486 1151 # relations between the files in the directories.
Chris@486 1152
Chris@486 1153 DIRECTORY_GRAPH = YES
Chris@486 1154
Chris@486 1155 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
Chris@486 1156 # generated by dot. Possible values are png, jpg, or gif
Chris@486 1157 # If left blank png will be used.
Chris@486 1158
Chris@486 1159 DOT_IMAGE_FORMAT = png
Chris@486 1160
Chris@486 1161 # The tag DOT_PATH can be used to specify the path where the dot tool can be
Chris@486 1162 # found. If left blank, it is assumed the dot tool can be found in the path.
Chris@486 1163
Chris@486 1164 DOT_PATH =
Chris@486 1165
Chris@486 1166 # The DOTFILE_DIRS tag can be used to specify one or more directories that
Chris@486 1167 # contain dot files that are included in the documentation (see the
Chris@486 1168 # \dotfile command).
Chris@486 1169
Chris@486 1170 DOTFILE_DIRS =
Chris@486 1171
Chris@486 1172 # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
Chris@486 1173 # (in pixels) of the graphs generated by dot. If a graph becomes larger than
Chris@486 1174 # this value, doxygen will try to truncate the graph, so that it fits within
Chris@486 1175 # the specified constraint. Beware that most browsers cannot cope with very
Chris@486 1176 # large images.
Chris@486 1177
Chris@486 1178 MAX_DOT_GRAPH_WIDTH = 1024
Chris@486 1179
Chris@486 1180 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
Chris@486 1181 # (in pixels) of the graphs generated by dot. If a graph becomes larger than
Chris@486 1182 # this value, doxygen will try to truncate the graph, so that it fits within
Chris@486 1183 # the specified constraint. Beware that most browsers cannot cope with very
Chris@486 1184 # large images.
Chris@486 1185
Chris@486 1186 MAX_DOT_GRAPH_HEIGHT = 1024
Chris@486 1187
Chris@486 1188 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
Chris@486 1189 # graphs generated by dot. A depth value of 3 means that only nodes reachable
Chris@486 1190 # from the root by following a path via at most 3 edges will be shown. Nodes
Chris@486 1191 # that lay further from the root node will be omitted. Note that setting this
Chris@486 1192 # option to 1 or 2 may greatly reduce the computation time needed for large
Chris@486 1193 # code bases. Also note that a graph may be further truncated if the graph's
Chris@486 1194 # image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
Chris@486 1195 # and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
Chris@486 1196 # the graph is not depth-constrained.
Chris@486 1197
Chris@486 1198 MAX_DOT_GRAPH_DEPTH = 0
Chris@486 1199
Chris@486 1200 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
Chris@486 1201 # background. This is disabled by default, which results in a white background.
Chris@486 1202 # Warning: Depending on the platform used, enabling this option may lead to
Chris@486 1203 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
Chris@486 1204 # read).
Chris@486 1205
Chris@486 1206 DOT_TRANSPARENT = NO
Chris@486 1207
Chris@486 1208 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
Chris@486 1209 # files in one run (i.e. multiple -o and -T options on the command line). This
Chris@486 1210 # makes dot run faster, but since only newer versions of dot (>1.8.10)
Chris@486 1211 # support this, this feature is disabled by default.
Chris@486 1212
Chris@486 1213 DOT_MULTI_TARGETS = YES
Chris@486 1214
Chris@486 1215 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
Chris@486 1216 # generate a legend page explaining the meaning of the various boxes and
Chris@486 1217 # arrows in the dot generated graphs.
Chris@486 1218
Chris@486 1219 GENERATE_LEGEND = YES
Chris@486 1220
Chris@486 1221 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
Chris@486 1222 # remove the intermediate dot files that are used to generate
Chris@486 1223 # the various graphs.
Chris@486 1224
Chris@486 1225 DOT_CLEANUP = YES
Chris@486 1226
Chris@486 1227 #---------------------------------------------------------------------------
Chris@486 1228 # Configuration::additions related to the search engine
Chris@486 1229 #---------------------------------------------------------------------------
Chris@486 1230
Chris@486 1231 # The SEARCHENGINE tag specifies whether or not a search engine should be
Chris@486 1232 # used. If set to NO the values of all tags below this one will be ignored.
Chris@486 1233
Chris@486 1234 SEARCHENGINE = NO