function test_MAP1_14
% test_MAP1_14 is a general purpose test routine that can be adjusted to
% test a number of different applications of MAP1_14
%
% A range of options are supplied in the early part of the program
%
% One use of the function is to create demonstrations; filenames <demoxx>
%  to illustrate particular features
%
% #1
% Identify the file (in 'MAPparamsName') containing the model parameters
%
% #2
% Identify the kind of model required (in 'AN_spikesOrProbability').
%  A full brainstem model (spikes) can be computed or a shorter model
%  (probability) that computes only so far as the auditory nerve
%
% #3
% Choose between a tone signal or file input (in 'signalType')
%
% #4
% Set the signal rms level (in leveldBSPL)
%
% #5
% Identify the channels in terms of their best frequencies in the vector
%  BFlist.
%
% Last minute changes to the parameters fetched earlier can be made using
%  the cell array of strings 'paramChanges'.
%  Each string must have the same format as the corresponding line in the
%  file identified in 'MAPparamsName'
%
% When the demonstration is satisfactory, freeze it by renaming it <demoxx>

dbstop if error
restorePath=path;
addpath (['..' filesep 'MAP'],    ['..' filesep 'wavFileStore'], ...
    ['..' filesep 'utilities'])

%%  #1 parameter file name
MAPparamsName='Normal';


%% #2 probability (fast) or spikes (slow) representation
% AN_spikesOrProbability='spikes';

% or
% NB probabilities are not corrected for refractory effects
AN_spikesOrProbability='probability';


%% #3 pure tone, harmonic sequence or speech file input
signalType= 'tones';
sampleRate= 50000;
duration=0.250;                 % seconds
% toneFrequency= 250:250:8000;    % harmonic sequence (Hz)
toneFrequency= 1000;            % or a pure tone (Hz8
rampDuration=.005;              % seconds

% or

% signalType= 'file';
% fileName='twister_44kHz';


%% #4 rms level
% signal details
leveldBSPL= 90;                  % dB SPL


%% #5 number of channels in the model
%   21-channel model (log spacing)
numChannels=21;
lowestBF=250; 	highestBF= 8000;
BFlist=round(logspace(log10(lowestBF), log10(highestBF), numChannels));

%   or specify your own channel BFs
% numChannels=1;
% BFlist=toneFrequency;


%% #6 change model parameters
paramChanges=[];

% or
% Parameter changes can be used to change one or more model parameters
%  *after* the MAPparams file has been read
% This example declares only one fiber type with a calcium clearance time
% constant of 80e-6 s (HSR fiber) when the probability option is selected.

% paramChanges={'AN_IHCsynapseParams.ANspeedUpFactor=5;', ...
%     'IHCpreSynapseParams.tauCa=86e-6;'};

% paramChanges={'DRNLParams.rateToAttenuationFactorProb = 0;'};

% paramChanges={'IHCpreSynapseParams.tauCa=86e-6;',
%     'AN_IHCsynapseParams.numFibers=	1000;'};

% fixed MOC attenuation(using negative factor)
paramChanges={'DRNLParams.rateToAttenuationFactorProb=-0.005;'};

%% delare 'showMap' options to control graphical output

showMapOptions.printModelParameters=1;   % prints all parameters
showMapOptions.showModelOutput=1;       % plot of all stages
showMapOptions.printFiringRates=1;      % prints stage activity levels
showMapOptions.showACF=0;               % shows SACF (probability only)
showMapOptions.showEfferent=1;          % tracks of AR and MOC
showMapOptions.surfProbability=1;       % 2D plot of HSR response 
showMapOptions.surfSpikes=1;            % 2D plot of spikes histogram

% disable certain silly options
if strcmp(AN_spikesOrProbability, 'spikes')
    % avoid nonsensical options
    showMapOptions.surfProbability=0;
    showMapOptions.showACF=0;
else
    showMapOptions.surfSpikes=0;
end
if strcmp(signalType, 'file')
    % needed for labeling plot
    showMapOptions.fileName=fileName;
else
    showMapOptions.fileName=[];
end

%% Generate stimuli

switch signalType
    case 'tones'
        inputSignal=createMultiTone(sampleRate, toneFrequency, ...
            leveldBSPL, duration, rampDuration);

    case 'file'
        %% file input simple or mixed
        [inputSignal sampleRate]=wavread(fileName);
        dt=1/sampleRate;
        inputSignal=inputSignal(:,1);
        targetRMS=20e-6*10^(leveldBSPL/20);
        rms=(mean(inputSignal.^2))^0.5;
        amp=targetRMS/rms;
        inputSignal=inputSignal*amp;
        silence= zeros(1,round(0.1/dt));
        inputSignal= [silence inputSignal' silence];
end


%% run the model
tic

fprintf('\n')
disp(['Signal duration= ' num2str(length(inputSignal)/sampleRate)])
disp([num2str(numChannels) ' channel model'])
disp('Computing ...')

MAP1_14(inputSignal, sampleRate, BFlist, ...
    MAPparamsName, AN_spikesOrProbability, paramChanges);


% the model run is now complete. Now display the results
UTIL_showMAP(showMapOptions, paramChanges)

toc
path(restorePath)


function inputSignal=createMultiTone(sampleRate, toneFrequency, ...
    leveldBSPL, duration, rampDuration)
% Create pure tone stimulus
dt=1/sampleRate; % seconds
time=dt: dt: duration;
inputSignal=sum(sin(2*pi*toneFrequency'*time), 1);
amp=10^(leveldBSPL/20)*28e-6;   % converts to Pascals (peak)
inputSignal=amp*inputSignal;

% apply ramps
% catch rampTime error
if rampDuration>0.5*duration, rampDuration=duration/2; end
rampTime=dt:dt:rampDuration;
ramp=[0.5*(1+cos(2*pi*rampTime/(2*rampDuration)+pi)) ...
    ones(1,length(time)-length(rampTime))];
inputSignal=inputSignal.*ramp;
ramp=fliplr(ramp);
inputSignal=inputSignal.*ramp;

% add 10 ms silence
silence= zeros(1,round(0.05/dt));
inputSignal= [silence inputSignal silence];

