Mercurial > hg > camir-aes2014
view toolboxes/FullBNT-1.0.7/GraphViz/arrow.m @ 0:e9a9cd732c1e tip
first hg version after svn
| author | wolffd |
|---|---|
| date | Tue, 10 Feb 2015 15:05:51 +0000 |
| parents | |
| children |
line wrap: on
line source
function [h,yy,zz] = arrow(varargin) % ARROW Draw a line with an arrowhead. % % ARROW(Start,Stop) draws a line with an arrow from Start to Stop (points % should be vectors of length 2 or 3, or matrices with 2 or 3 % columns), and returns the graphics handle of the arrow(s). % % ARROW uses the mouse (click-drag) to create an arrow. % % ARROW DEMO & ARROW DEMO2 show 3-D & 2-D demos of the capabilities of ARROW. % % ARROW may be called with a normal argument list or a property-based list. % ARROW(Start,Stop,Length,BaseAngle,TipAngle,Width,Page,CrossDir) is % the full normal argument list, where all but the Start and Stop % points are optional. If you need to specify a later argument (e.g., % Page) but want default values of earlier ones (e.g., TipAngle), % pass an empty matrix for the earlier ones (e.g., TipAngle=[]). % % ARROW('Property1',PropVal1,'Property2',PropVal2,...) creates arrows with the % given properties, using default values for any unspecified or given as % 'default' or NaN. Some properties used for line and patch objects are % used in a modified fashion, others are passed directly to LINE, PATCH, % or SET. For a detailed properties explanation, call ARROW PROPERTIES. % % Start The starting points. B % Stop The end points. /|\ ^ % Length Length of the arrowhead in pixels. /|||\ | % BaseAngle Base angle in degrees (ADE). //|||\\ L| % TipAngle Tip angle in degrees (ABC). ///|||\\\ e| % Width Width of the base in pixels. ////|||\\\\ n| % Page Use hardcopy proportions. /////|D|\\\\\ g| % CrossDir Vector || to arrowhead plane. //// ||| \\\\ t| % NormalDir Vector out of arrowhead plane. /// ||| \\\ h| % Ends Which end has an arrowhead. //<----->|| \\ | % ObjectHandles Vector of handles to update. / base ||| \ V % E angle||<-------->C % ARROW(H,'Prop1',PropVal1,...), where H is a |||tipangle % vector of handles to previously-created arrows ||| % and/or line objects, will update the previously- ||| % created arrows according to the current view -->|A|<-- width % and any specified properties, and will convert % two-point line objects to corresponding arrows. ARROW(H) will update % the arrows if the current view has changed. Root, figure, or axes % handles included in H are replaced by all descendant Arrow objects. % % A property list can follow any specified normal argument list, e.g., % ARROW([1 2 3],[0 0 0],36,'BaseAngle',60) creates an arrow from (1,2,3) to % the origin, with an arrowhead of length 36 pixels and 60-degree base angle. % % The basic arguments or properties can generally be vectorized to create % multiple arrows with the same call. This is done by passing a property % with one row per arrow, or, if all arrows are to have the same property % value, just one row may be specified. % % You may want to execute AXIS(AXIS) before calling ARROW so it doesn't change % the axes on you; ARROW determines the sizes of arrow components BEFORE the % arrow is plotted, so if ARROW changes axis limits, arrows may be malformed. % % This version of ARROW uses features of MATLAB 5 and is incompatible with % earlier MATLAB versions (ARROW for MATLAB 4.2c is available separately); % some problems with perspective plots still exist. % Copyright (c)1995-1997, Erik A. Johnson <johnsone@uiuc.edu>, 8/14/97 % Revision history: % 8/14/97 EAJ Added workaround for MATLAB 5.1 scalar logical transpose bug. % 7/21/97 EAJ Fixed a few misc bugs. % 7/14/97 EAJ Make arrow([],'Prop',...) do nothing (no old handles) % 6/23/97 EAJ MATLAB 5 compatible version, release. % 5/27/97 EAJ Added Line Arrows back in. Corrected a few bugs. % 5/26/97 EAJ Changed missing Start/Stop to mouse-selected arrows. % 5/19/97 EAJ MATLAB 5 compatible version, beta. % 4/13/97 EAJ MATLAB 5 compatible version, alpha. % 1/31/97 EAJ Fixed bug with multiple arrows and unspecified Z coords. % 12/05/96 EAJ Fixed one more bug with log plots and NormalDir specified % 10/24/96 EAJ Fixed bug with log plots and NormalDir specified % 11/13/95 EAJ Corrected handling for 'reverse' axis directions % 10/06/95 EAJ Corrected occasional conflict with SUBPLOT % 4/24/95 EAJ A major rewrite. % Fall 94 EAJ Original code. % Things to be done: % - segment parsing, computing, and plotting into separate subfunctions % - change computing from Xform to Camera paradigms % + this will help especially with 3-D perspective plots % + if the WarpToFill section works right, remove warning code % + when perpsective works properly, remove perspective warning code % - add cell property values and struct property name/values (like get/set) % - get rid of NaN as the "default" data label % + perhaps change userdata to a struct and don't include (or leave % empty) the values specified as default; or use a cell containing % an empty matrix for a default value % - add functionality of GET to retrieve current values of ARROW properties % Many thanks to Keith Rogers <kerog@ai.mit.edu> for his many excellent % suggestions and beta testing. Check out his shareware package MATDRAW. % He has permission to distribute ARROW with MATDRAW. % global variable initialization global ARROW_PERSP_WARN ARROW_STRETCH_WARN ARROW_AXLIMITS if isempty(ARROW_PERSP_WARN ), ARROW_PERSP_WARN =1; end; if isempty(ARROW_STRETCH_WARN), ARROW_STRETCH_WARN=1; end; % Handle callbacks if (nargin>0 & isstr(varargin{1}) & strcmp(lower(varargin{1}),'callback')), arrow_callback(varargin{2:end}); return; end; % Are we doing the demo? c = sprintf('\n'); if (nargin==1 & isstr(varargin{1})), arg1 = lower(varargin{1}); if strncmp(arg1,'prop',4), arrow_props; elseif strncmp(arg1,'demo',4) clf reset demo_info = arrow_demo; if ~strncmp(arg1,'demo2',5), hh=arrow_demo3(demo_info); else, hh=arrow_demo2(demo_info); end; if (nargout>=1), h=hh; end; elseif strncmp(arg1,'fixlimits',3), arrow_fixlimits(ARROW_AXLIMITS); ARROW_AXLIMITS=[]; elseif strncmp(arg1,'help',4), disp(help(mfilename)); else, error([upper(mfilename) ' got an unknown single-argument string ''' deblank(arg1) '''.']); end; return; end; % Check # of arguments if (nargout>3), error([upper(mfilename) ' produces at most 3 output arguments.']); end; % find first property number firstprop = nargin+1; for k=1:length(varargin), if ~isnumeric(varargin{k}), firstprop=k; break; end; end; lastnumeric = firstprop-1; % check property list if (firstprop<=nargin), for k=firstprop:2:nargin, curarg = varargin{k}; if ~isstr(curarg) | sum(size(curarg)>1)>1, error([upper(mfilename) ' requires that a property name be a single string.']); end; end; if (rem(nargin-firstprop,2)~=1), error([upper(mfilename) ' requires that the property ''' ... varargin{nargin} ''' be paired with a property value.']); end; end; % default output if (nargout>0), h=[]; end; if (nargout>1), yy=[]; end; if (nargout>2), zz=[]; end; % set values to empty matrices start = []; stop = []; len = []; baseangle = []; tipangle = []; wid = []; page = []; crossdir = []; ends = []; ax = []; oldh = []; ispatch = []; defstart = [NaN NaN NaN]; defstop = [NaN NaN NaN]; deflen = 16; defbaseangle = 90; deftipangle = 16; defwid = 0; defpage = 0; defcrossdir = [NaN NaN NaN]; defends = 1; defoldh = []; defispatch = 1; % The 'Tag' we'll put on our arrows ArrowTag = 'Arrow'; % check for oldstyle arguments if (firstprop==2), % assume arg1 is a set of handles oldh = varargin{1}(:); if isempty(oldh), return; end; elseif (firstprop>9), error([upper(mfilename) ' takes at most 8 non-property arguments.']); elseif (firstprop>2), s = str2mat('start','stop','len','baseangle','tipangle','wid','page','crossdir'); for k=1:firstprop-1, eval([deblank(s(k,:)) '=varargin{k};']); end; end; % parse property pairs extraprops={}; for k=firstprop:2:nargin, prop = varargin{k}; val = varargin{k+1}; prop = [lower(prop(:)') ' ']; if strncmp(prop,'start' ,5), start = val; elseif strncmp(prop,'stop' ,4), stop = val; elseif strncmp(prop,'len' ,3), len = val(:); elseif strncmp(prop,'base' ,4), baseangle = val(:); elseif strncmp(prop,'tip' ,3), tipangle = val(:); elseif strncmp(prop,'wid' ,3), wid = val(:); elseif strncmp(prop,'page' ,4), page = val; elseif strncmp(prop,'cross' ,5), crossdir = val; elseif strncmp(prop,'norm' ,4), if (isstr(val)), crossdir=val; else, crossdir=val*sqrt(-1); end; elseif strncmp(prop,'end' ,3), ends = val; elseif strncmp(prop,'object',6), oldh = val(:); elseif strncmp(prop,'handle',6), oldh = val(:); elseif strncmp(prop,'type' ,4), ispatch = val; elseif strncmp(prop,'userd' ,5), %ignore it else, % make sure it is a valid patch or line property eval('get(0,[''DefaultPatch'' varargin{k}]);err=0;','err=1;'); errstr=lasterr; if (err), eval('get(0,[''DefaultLine'' varargin{k}]);err=0;','err=1;'); end; if (err), errstr(1:max(find(errstr==setstr(13)|errstr==setstr(10)))) = ''; error([upper(mfilename) ' got ' errstr]); end; extraprops={extraprops{:},varargin{k},val}; end; end; % Check if we got 'default' values start = arrow_defcheck(start ,defstart ,'Start' ); stop = arrow_defcheck(stop ,defstop ,'Stop' ); len = arrow_defcheck(len ,deflen ,'Length' ); baseangle = arrow_defcheck(baseangle,defbaseangle,'BaseAngle' ); tipangle = arrow_defcheck(tipangle ,deftipangle ,'TipAngle' ); wid = arrow_defcheck(wid ,defwid ,'Width' ); crossdir = arrow_defcheck(crossdir ,defcrossdir ,'CrossDir' ); page = arrow_defcheck(page ,defpage ,'Page' ); ends = arrow_defcheck(ends ,defends ,'' ); oldh = arrow_defcheck(oldh ,[] ,'ObjectHandles'); ispatch = arrow_defcheck(ispatch ,defispatch ,'' ); % check transpose on arguments [m,n]=size(start ); if any(m==[2 3])&(n==1|n>3), start = start'; end; [m,n]=size(stop ); if any(m==[2 3])&(n==1|n>3), stop = stop'; end; [m,n]=size(crossdir); if any(m==[2 3])&(n==1|n>3), crossdir = crossdir'; end; % convert strings to numbers if ~isempty(ends) & isstr(ends), endsorig = ends; [m,n] = size(ends); col = lower([ends(:,1:min(3,n)) ones(m,max(0,3-n))*' ']); ends = NaN*ones(m,1); oo = ones(1,m); ii=find(all(col'==['non']'*oo)'); if ~isempty(ii), ends(ii)=ones(length(ii),1)*0; end; ii=find(all(col'==['sto']'*oo)'); if ~isempty(ii), ends(ii)=ones(length(ii),1)*1; end; ii=find(all(col'==['sta']'*oo)'); if ~isempty(ii), ends(ii)=ones(length(ii),1)*2; end; ii=find(all(col'==['bot']'*oo)'); if ~isempty(ii), ends(ii)=ones(length(ii),1)*3; end; if any(isnan(ends)), ii = min(find(isnan(ends))); error([upper(mfilename) ' does not recognize ' deblank(endsorig(ii,:)) ' as a valid Ends value.']); end; else, ends = ends(:); end; if ~isempty(ispatch) & isstr(ispatch), col = lower(ispatch(:,1)); patchchar='p'; linechar='l'; defchar=' '; mask = col~=patchchar & col~=linechar & col~=defchar; if any(mask) error([upper(mfilename) ' does not recognize ' deblank(ispatch(min(find(mask)),:)) ' as a valid Type value.']); end; ispatch = (col==patchchar)*1 + (col==linechar)*0 + (col==defchar)*defispatch; else, ispatch = ispatch(:); end; oldh = oldh(:); % check object handles if ~all(ishandle(oldh)), error([upper(mfilename) ' got invalid object handles.']); end; % expand root, figure, and axes handles if ~isempty(oldh), ohtype = get(oldh,'Type'); mask = strcmp(ohtype,'root') | strcmp(ohtype,'figure') | strcmp(ohtype,'axes'); if any(mask), oldh = num2cell(oldh); for ii=find(mask)', oldh(ii) = {findobj(oldh{ii},'Tag',ArrowTag)}; end; oldh = cat(1,oldh{:}); if isempty(oldh), return; end; % no arrows to modify, so just leave end; end; % largest argument length [mstart,junk]=size(start); [mstop,junk]=size(stop); [mcrossdir,junk]=size(crossdir); argsizes = [length(oldh) mstart mstop ... length(len) length(baseangle) length(tipangle) ... length(wid) length(page) mcrossdir length(ends) ]; args=['length(ObjectHandle) '; ... '#rows(Start) '; ... '#rows(Stop) '; ... 'length(Length) '; ... 'length(BaseAngle) '; ... 'length(TipAngle) '; ... 'length(Width) '; ... 'length(Page) '; ... '#rows(CrossDir) '; ... '#rows(Ends) ']; if (any(imag(crossdir(:))~=0)), args(9,:) = '#rows(NormalDir) '; end; if isempty(oldh), narrows = max(argsizes); else, narrows = length(oldh); end; if (narrows<=0), narrows=1; end; % Check size of arguments ii = find((argsizes~=0)&(argsizes~=1)&(argsizes~=narrows)); if ~isempty(ii), s = args(ii',:); while ((size(s,2)>1)&((abs(s(:,size(s,2)))==0)|(abs(s(:,size(s,2)))==abs(' ')))), s = s(:,1:size(s,2)-1); end; s = [ones(length(ii),1)*[upper(mfilename) ' requires that '] s ... ones(length(ii),1)*[' equal the # of arrows (' num2str(narrows) ').' c]]; s = s'; s = s(:)'; s = s(1:length(s)-1); error(setstr(s)); end; % check element length in Start, Stop, and CrossDir if ~isempty(start), [m,n] = size(start); if (n==2), start = [start NaN*ones(m,1)]; elseif (n~=3), error([upper(mfilename) ' requires 2- or 3-element Start points.']); end; end; if ~isempty(stop), [m,n] = size(stop); if (n==2), stop = [stop NaN*ones(m,1)]; elseif (n~=3), error([upper(mfilename) ' requires 2- or 3-element Stop points.']); end; end; if ~isempty(crossdir), [m,n] = size(crossdir); if (n<3), crossdir = [crossdir NaN*ones(m,3-n)]; elseif (n~=3), if (all(imag(crossdir(:))==0)), error([upper(mfilename) ' requires 2- or 3-element CrossDir vectors.']); else, error([upper(mfilename) ' requires 2- or 3-element NormalDir vectors.']); end; end; end; % fill empty arguments if isempty(start ), start = [Inf Inf Inf]; end; if isempty(stop ), stop = [Inf Inf Inf]; end; if isempty(len ), len = Inf; end; if isempty(baseangle ), baseangle = Inf; end; if isempty(tipangle ), tipangle = Inf; end; if isempty(wid ), wid = Inf; end; if isempty(page ), page = Inf; end; if isempty(crossdir ), crossdir = [Inf Inf Inf]; end; if isempty(ends ), ends = Inf; end; if isempty(ispatch ), ispatch = Inf; end; % expand single-column arguments o = ones(narrows,1); if (size(start ,1)==1), start = o * start ; end; if (size(stop ,1)==1), stop = o * stop ; end; if (length(len )==1), len = o * len ; end; if (length(baseangle )==1), baseangle = o * baseangle ; end; if (length(tipangle )==1), tipangle = o * tipangle ; end; if (length(wid )==1), wid = o * wid ; end; if (length(page )==1), page = o * page ; end; if (size(crossdir ,1)==1), crossdir = o * crossdir ; end; if (length(ends )==1), ends = o * ends ; end; if (length(ispatch )==1), ispatch = o * ispatch ; end; ax = o * gca; % if we've got handles, get the defaults from the handles if ~isempty(oldh), for k=1:narrows, oh = oldh(k); ud = get(oh,'UserData'); ax(k) = get(oh,'Parent'); ohtype = get(oh,'Type'); if strcmp(get(oh,'Tag'),ArrowTag), % if it's an arrow already if isinf(ispatch(k)), ispatch(k)=strcmp(ohtype,'patch'); end; % arrow UserData format: [start' stop' len base tip wid page crossdir' ends] start0 = ud(1:3); stop0 = ud(4:6); if (isinf(len(k))), len(k) = ud( 7); end; if (isinf(baseangle(k))), baseangle(k) = ud( 8); end; if (isinf(tipangle(k))), tipangle(k) = ud( 9); end; if (isinf(wid(k))), wid(k) = ud(10); end; if (isinf(page(k))), page(k) = ud(11); end; if (isinf(crossdir(k,1))), crossdir(k,1) = ud(12); end; if (isinf(crossdir(k,2))), crossdir(k,2) = ud(13); end; if (isinf(crossdir(k,3))), crossdir(k,3) = ud(14); end; if (isinf(ends(k))), ends(k) = ud(15); end; elseif strcmp(ohtype,'line')|strcmp(ohtype,'patch'), % it's a non-arrow line or patch convLineToPatch = 1; %set to make arrow patches when converting from lines. if isinf(ispatch(k)), ispatch(k)=convLineToPatch|strcmp(ohtype,'patch'); end; x=get(oh,'XData'); x=x(~isnan(x(:))); if isempty(x), x=NaN; end; y=get(oh,'YData'); y=y(~isnan(y(:))); if isempty(y), y=NaN; end; z=get(oh,'ZData'); z=z(~isnan(z(:))); if isempty(z), z=NaN; end; start0 = [x(1) y(1) z(1) ]; stop0 = [x(end) y(end) z(end)]; else, error([upper(mfilename) ' cannot convert ' ohtype ' objects.']); end; ii=find(isinf(start(k,:))); if ~isempty(ii), start(k,ii)=start0(ii); end; ii=find(isinf(stop( k,:))); if ~isempty(ii), stop( k,ii)=stop0( ii); end; end; end; % convert Inf's to NaN's start( isinf(start )) = NaN; stop( isinf(stop )) = NaN; len( isinf(len )) = NaN; baseangle( isinf(baseangle)) = NaN; tipangle( isinf(tipangle )) = NaN; wid( isinf(wid )) = NaN; page( isinf(page )) = NaN; crossdir( isinf(crossdir )) = NaN; ends( isinf(ends )) = NaN; ispatch( isinf(ispatch )) = NaN; % set up the UserData data (here so not corrupted by log10's and such) ud = [start stop len baseangle tipangle wid page crossdir ends]; % Set Page defaults %page = (~isnan(page))&(page); if isnan(page) page = 0; end % Get axes limits, range, min; correct for aspect ratio and log scale axm = zeros(3,narrows); axr = zeros(3,narrows); axrev = zeros(3,narrows); ap = zeros(2,narrows); xyzlog = zeros(3,narrows); limmin = zeros(2,narrows); limrange = zeros(2,narrows); oldaxlims = zeros(narrows,7); oneax = all(ax==ax(1)); if (oneax), T = zeros(4,4); invT = zeros(4,4); else, T = zeros(16,narrows); invT = zeros(16,narrows); end; axnotdone = logical(ones(size(ax))); while (any(axnotdone)), ii = min(find(axnotdone)); curax = ax(ii); curpage = page(ii); % get axes limits and aspect ratio axl = [get(curax,'XLim'); get(curax,'YLim'); get(curax,'ZLim')]; oldaxlims(min(find(oldaxlims(:,1)==0)),:) = [curax reshape(axl',1,6)]; % get axes size in pixels (points) u = get(curax,'Units'); axposoldunits = get(curax,'Position'); really_curpage = curpage & strcmp(u,'normalized'); if (really_curpage), curfig = get(curax,'Parent'); pu = get(curfig,'PaperUnits'); set(curfig,'PaperUnits','points'); pp = get(curfig,'PaperPosition'); set(curfig,'PaperUnits',pu); set(curax,'Units','pixels'); curapscreen = get(curax,'Position'); set(curax,'Units','normalized'); curap = pp.*get(curax,'Position'); else, set(curax,'Units','pixels'); curapscreen = get(curax,'Position'); curap = curapscreen; end; set(curax,'Units',u); set(curax,'Position',axposoldunits); % handle non-stretched axes position str_stretch = { 'DataAspectRatioMode' ; ... 'PlotBoxAspectRatioMode' ; ... 'CameraViewAngleMode' }; str_camera = { 'CameraPositionMode' ; ... 'CameraTargetMode' ; ... 'CameraViewAngleMode' ; ... 'CameraUpVectorMode' }; notstretched = strcmp(get(curax,str_stretch),'manual'); manualcamera = strcmp(get(curax,str_camera),'manual'); if ~arrow_WarpToFill(notstretched,manualcamera,curax), % give a warning that this has not been thoroughly tested if 0 & ARROW_STRETCH_WARN, ARROW_STRETCH_WARN = 0; strs = {str_stretch{1:2},str_camera{:}}; strs = [char(ones(length(strs),1)*sprintf('\n ')) char(strs)]'; warning([upper(mfilename) ' may not yet work quite right ' ... 'if any of the following are ''manual'':' strs(:).']); end; % find the true pixel size of the actual axes texttmp = text(axl(1,[1 2 2 1 1 2 2 1]), ... axl(2,[1 1 2 2 1 1 2 2]), ... axl(3,[1 1 1 1 2 2 2 2]),''); set(texttmp,'Units','points'); textpos = get(texttmp,'Position'); delete(texttmp); textpos = cat(1,textpos{:}); textpos = max(textpos(:,1:2)) - min(textpos(:,1:2)); % adjust the axes position if (really_curpage), % adjust to printed size textpos = textpos * min(curap(3:4)./textpos); curap = [curap(1:2)+(curap(3:4)-textpos)/2 textpos]; else, % adjust for pixel roundoff textpos = textpos * min(curapscreen(3:4)./textpos); curap = [curap(1:2)+(curap(3:4)-textpos)/2 textpos]; end; end; if ARROW_PERSP_WARN & ~strcmp(get(curax,'Projection'),'orthographic'), ARROW_PERSP_WARN = 0; warning([upper(mfilename) ' does not yet work right for 3-D perspective projection.']); end; % adjust limits for log scale on axes curxyzlog = [strcmp(get(curax,'XScale'),'log'); ... strcmp(get(curax,'YScale'),'log'); ... strcmp(get(curax,'ZScale'),'log')]; if (any(curxyzlog)), ii = find([curxyzlog;curxyzlog]); if (any(axl(ii)<=0)), error([upper(mfilename) ' does not support non-positive limits on log-scaled axes.']); else, axl(ii) = log10(axl(ii)); end; end; % correct for 'reverse' direction on axes; curreverse = [strcmp(get(curax,'XDir'),'reverse'); ... strcmp(get(curax,'YDir'),'reverse'); ... strcmp(get(curax,'ZDir'),'reverse')]; ii = find(curreverse); if ~isempty(ii), axl(ii,[1 2])=-axl(ii,[2 1]); end; % compute the range of 2-D values curT = get(curax,'Xform'); lim = curT*[0 1 0 1 0 1 0 1;0 0 1 1 0 0 1 1;0 0 0 0 1 1 1 1;1 1 1 1 1 1 1 1]; lim = lim(1:2,:)./([1;1]*lim(4,:)); curlimmin = min(lim')'; curlimrange = max(lim')' - curlimmin; curinvT = inv(curT); if (~oneax), curT = curT.'; curinvT = curinvT.'; curT = curT(:); curinvT = curinvT(:); end; % check which arrows to which cur corresponds ii = find((ax==curax)&(page==curpage)); oo = ones(1,length(ii)); axr(:,ii) = diff(axl')' * oo; axm(:,ii) = axl(:,1) * oo; axrev(:,ii) = curreverse * oo; ap(:,ii) = curap(3:4)' * oo; xyzlog(:,ii) = curxyzlog * oo; limmin(:,ii) = curlimmin * oo; limrange(:,ii) = curlimrange * oo; if (oneax), T = curT; invT = curinvT; else, T(:,ii) = curT * oo; invT(:,ii) = curinvT * oo; end; axnotdone(ii) = zeros(1,length(ii)); end; oldaxlims(oldaxlims(:,1)==0,:)=[]; % correct for log scales curxyzlog = xyzlog.'; ii = find(curxyzlog(:)); if ~isempty(ii), start( ii) = real(log10(start( ii))); stop( ii) = real(log10(stop( ii))); if (all(imag(crossdir)==0)), % pulled (ii) subscript on crossdir, 12/5/96 eaj crossdir(ii) = real(log10(crossdir(ii))); end; end; % correct for reverse directions ii = find(axrev.'); if ~isempty(ii), start( ii) = -start( ii); stop( ii) = -stop( ii); crossdir(ii) = -crossdir(ii); end; % transpose start/stop values start = start.'; stop = stop.'; % take care of defaults, page was done above ii=find(isnan(start(:) )); if ~isempty(ii), start(ii) = axm(ii)+axr(ii)/2; end; ii=find(isnan(stop(:) )); if ~isempty(ii), stop(ii) = axm(ii)+axr(ii)/2; end; ii=find(isnan(crossdir(:) )); if ~isempty(ii), crossdir(ii) = zeros(length(ii),1); end; ii=find(isnan(len )); if ~isempty(ii), len(ii) = ones(length(ii),1)*deflen; end; ii=find(isnan(baseangle )); if ~isempty(ii), baseangle(ii) = ones(length(ii),1)*defbaseangle; end; ii=find(isnan(tipangle )); if ~isempty(ii), tipangle(ii) = ones(length(ii),1)*deftipangle; end; ii=find(isnan(wid )); if ~isempty(ii), wid(ii) = ones(length(ii),1)*defwid; end; ii=find(isnan(ends )); if ~isempty(ii), ends(ii) = ones(length(ii),1)*defends; end; % transpose rest of values len = len.'; baseangle = baseangle.'; tipangle = tipangle.'; wid = wid.'; page = page.'; crossdir = crossdir.'; ends = ends.'; ax = ax.'; % given x, a 3xN matrix of points in 3-space; % want to convert to X, the corresponding 4xN 2-space matrix % % tmp1=[(x-axm)./axr; ones(1,size(x,1))]; % if (oneax), X=T*tmp1; % else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=T.*tmp1; % tmp2=zeros(4,4*N); tmp2(:)=tmp1(:); % X=zeros(4,N); X(:)=sum(tmp2)'; end; % X = X ./ (ones(4,1)*X(4,:)); % for all points with start==stop, start=stop-(verysmallvalue)*(up-direction); ii = find(all(start==stop)); if ~isempty(ii), % find an arrowdir vertical on screen and perpendicular to viewer % transform to 2-D tmp1 = [(stop(:,ii)-axm(:,ii))./axr(:,ii);ones(1,length(ii))]; if (oneax), twoD=T*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=T(:,ii).*tmp1; tmp2=zeros(4,4*length(ii)); tmp2(:)=tmp1(:); twoD=zeros(4,length(ii)); twoD(:)=sum(tmp2)'; end; twoD=twoD./(ones(4,1)*twoD(4,:)); % move the start point down just slightly tmp1 = twoD + [0;-1/1000;0;0]*(limrange(2,ii)./ap(2,ii)); % transform back to 3-D if (oneax), threeD=invT*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=invT(:,ii).*tmp1; tmp2=zeros(4,4*length(ii)); tmp2(:)=tmp1(:); threeD=zeros(4,length(ii)); threeD(:)=sum(tmp2)'; end; start(:,ii) = (threeD(1:3,:)./(ones(3,1)*threeD(4,:))).*axr(:,ii)+axm(:,ii); end; % compute along-arrow points % transform Start points tmp1=[(start-axm)./axr;ones(1,narrows)]; if (oneax), X0=T*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=T.*tmp1; tmp2=zeros(4,4*narrows); tmp2(:)=tmp1(:); X0=zeros(4,narrows); X0(:)=sum(tmp2)'; end; X0=X0./(ones(4,1)*X0(4,:)); % transform Stop points tmp1=[(stop-axm)./axr;ones(1,narrows)]; if (oneax), Xf=T*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=T.*tmp1; tmp2=zeros(4,4*narrows); tmp2(:)=tmp1(:); Xf=zeros(4,narrows); Xf(:)=sum(tmp2)'; end; Xf=Xf./(ones(4,1)*Xf(4,:)); % compute pixel distance between points D = sqrt(sum(((Xf(1:2,:)-X0(1:2,:)).*(ap./limrange)).^2)); % compute and modify along-arrow distances len1 = len; len2 = len - (len.*tan(tipangle/180*pi)-wid/2).*tan((90-baseangle)/180*pi); slen0 = zeros(1,narrows); slen1 = len1 .* ((ends==2)|(ends==3)); slen2 = len2 .* ((ends==2)|(ends==3)); len0 = zeros(1,narrows); len1 = len1 .* ((ends==1)|(ends==3)); len2 = len2 .* ((ends==1)|(ends==3)); % for no start arrowhead ii=find((ends==1)&(D<len2)); if ~isempty(ii), slen0(ii) = D(ii)-len2(ii); end; % for no end arrowhead ii=find((ends==2)&(D<slen2)); if ~isempty(ii), len0(ii) = D(ii)-slen2(ii); end; len1 = len1 + len0; len2 = len2 + len0; slen1 = slen1 + slen0; slen2 = slen2 + slen0; % note: the division by D below will probably not be accurate if both % of the following are true: % 1. the ratio of the line length to the arrowhead % length is large % 2. the view is highly perspective. % compute stoppoints tmp1=X0.*(ones(4,1)*(len0./D))+Xf.*(ones(4,1)*(1-len0./D)); if (oneax), tmp3=invT*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=invT.*tmp1; tmp2=zeros(4,4*narrows); tmp2(:)=tmp1(:); tmp3=zeros(4,narrows); tmp3(:)=sum(tmp2)'; end; stoppoint = tmp3(1:3,:)./(ones(3,1)*tmp3(4,:)).*axr+axm; % compute tippoints tmp1=X0.*(ones(4,1)*(len1./D))+Xf.*(ones(4,1)*(1-len1./D)); if (oneax), tmp3=invT*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=invT.*tmp1; tmp2=zeros(4,4*narrows); tmp2(:)=tmp1(:); tmp3=zeros(4,narrows); tmp3(:)=sum(tmp2)'; end; tippoint = tmp3(1:3,:)./(ones(3,1)*tmp3(4,:)).*axr+axm; % compute basepoints tmp1=X0.*(ones(4,1)*(len2./D))+Xf.*(ones(4,1)*(1-len2./D)); if (oneax), tmp3=invT*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=invT.*tmp1; tmp2=zeros(4,4*narrows); tmp2(:)=tmp1(:); tmp3=zeros(4,narrows); tmp3(:)=sum(tmp2)'; end; basepoint = tmp3(1:3,:)./(ones(3,1)*tmp3(4,:)).*axr+axm; % compute startpoints tmp1=X0.*(ones(4,1)*(1-slen0./D))+Xf.*(ones(4,1)*(slen0./D)); if (oneax), tmp3=invT*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=invT.*tmp1; tmp2=zeros(4,4*narrows); tmp2(:)=tmp1(:); tmp3=zeros(4,narrows); tmp3(:)=sum(tmp2)'; end; startpoint = tmp3(1:3,:)./(ones(3,1)*tmp3(4,:)).*axr+axm; % compute stippoints tmp1=X0.*(ones(4,1)*(1-slen1./D))+Xf.*(ones(4,1)*(slen1./D)); if (oneax), tmp3=invT*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=invT.*tmp1; tmp2=zeros(4,4*narrows); tmp2(:)=tmp1(:); tmp3=zeros(4,narrows); tmp3(:)=sum(tmp2)'; end; stippoint = tmp3(1:3,:)./(ones(3,1)*tmp3(4,:)).*axr+axm; % compute sbasepoints tmp1=X0.*(ones(4,1)*(1-slen2./D))+Xf.*(ones(4,1)*(slen2./D)); if (oneax), tmp3=invT*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=invT.*tmp1; tmp2=zeros(4,4*narrows); tmp2(:)=tmp1(:); tmp3=zeros(4,narrows); tmp3(:)=sum(tmp2)'; end; sbasepoint = tmp3(1:3,:)./(ones(3,1)*tmp3(4,:)).*axr+axm; % compute cross-arrow directions for arrows with NormalDir specified if (any(imag(crossdir(:))~=0)), ii = find(any(imag(crossdir)~=0)); crossdir(:,ii) = cross((stop(:,ii)-start(:,ii))./axr(:,ii), ... imag(crossdir(:,ii))).*axr(:,ii); end; % compute cross-arrow directions basecross = crossdir + basepoint; tipcross = crossdir + tippoint; sbasecross = crossdir + sbasepoint; stipcross = crossdir + stippoint; ii = find(all(crossdir==0)|any(isnan(crossdir))); if ~isempty(ii), numii = length(ii); % transform start points tmp1 = [basepoint(:,ii) tippoint(:,ii) sbasepoint(:,ii) stippoint(:,ii)]; tmp1 = (tmp1-axm(:,[ii ii ii ii])) ./ axr(:,[ii ii ii ii]); tmp1 = [tmp1; ones(1,4*numii)]; if (oneax), X0=T*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=T(:,[ii ii ii ii]).*tmp1; tmp2=zeros(4,16*numii); tmp2(:)=tmp1(:); X0=zeros(4,4*numii); X0(:)=sum(tmp2)'; end; X0=X0./(ones(4,1)*X0(4,:)); % transform stop points tmp1 = [(2*stop(:,ii)-start(:,ii)-axm(:,ii))./axr(:,ii);ones(1,numii)]; tmp1 = [tmp1 tmp1 tmp1 tmp1]; if (oneax), Xf=T*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=T(:,[ii ii ii ii]).*tmp1; tmp2=zeros(4,16*numii); tmp2(:)=tmp1(:); Xf=zeros(4,4*numii); Xf(:)=sum(tmp2)'; end; Xf=Xf./(ones(4,1)*Xf(4,:)); % compute perpendicular directions pixfact = ((limrange(1,ii)./limrange(2,ii)).*(ap(2,ii)./ap(1,ii))).^2; pixfact = [pixfact pixfact pixfact pixfact]; pixfact = [pixfact;1./pixfact]; [dummyval,jj] = max(abs(Xf(1:2,:)-X0(1:2,:))); jj1 = ((1:4)'*ones(1,length(jj))==ones(4,1)*jj); jj2 = ((1:4)'*ones(1,length(jj))==ones(4,1)*(3-jj)); jj3 = jj1(1:2,:); Xp = X0; Xp(jj2) = X0(jj2) + ones(sum(jj2(:)),1); Xp(jj1) = X0(jj1) - (Xf(jj2)-X0(jj2))./(Xf(jj1)-X0(jj1)) .* pixfact(jj3); % inverse transform the cross points if (oneax), Xp=invT*Xp; else, tmp1=[Xp;Xp;Xp;Xp]; tmp1=invT(:,[ii ii ii ii]).*tmp1; tmp2=zeros(4,16*numii); tmp2(:)=tmp1(:); Xp=zeros(4,4*numii); Xp(:)=sum(tmp2)'; end; Xp=(Xp(1:3,:)./(ones(3,1)*Xp(4,:))).*axr(:,[ii ii ii ii])+axm(:,[ii ii ii ii]); basecross(:,ii) = Xp(:,0*numii+(1:numii)); tipcross(:,ii) = Xp(:,1*numii+(1:numii)); sbasecross(:,ii) = Xp(:,2*numii+(1:numii)); stipcross(:,ii) = Xp(:,3*numii+(1:numii)); end; % compute all points % compute start points axm11 = [axm axm axm axm axm axm axm axm axm axm axm]; axr11 = [axr axr axr axr axr axr axr axr axr axr axr]; st = [stoppoint tippoint basepoint sbasepoint stippoint startpoint stippoint sbasepoint basepoint tippoint stoppoint]; tmp1 = (st - axm11) ./ axr11; tmp1 = [tmp1; ones(1,size(tmp1,2))]; if (oneax), X0=T*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=[T T T T T T T T T T T].*tmp1; tmp2=zeros(4,44*narrows); tmp2(:)=tmp1(:); X0=zeros(4,11*narrows); X0(:)=sum(tmp2)'; end; X0=X0./(ones(4,1)*X0(4,:)); % compute stop points tmp1 = ([start tipcross basecross sbasecross stipcross stop stipcross sbasecross basecross tipcross start] ... - axm11) ./ axr11; tmp1 = [tmp1; ones(1,size(tmp1,2))]; if (oneax), Xf=T*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=[T T T T T T T T T T T].*tmp1; tmp2=zeros(4,44*narrows); tmp2(:)=tmp1(:); Xf=zeros(4,11*narrows); Xf(:)=sum(tmp2)'; end; Xf=Xf./(ones(4,1)*Xf(4,:)); % compute lengths len0 = len.*((ends==1)|(ends==3)).*tan(tipangle/180*pi); slen0 = len.*((ends==2)|(ends==3)).*tan(tipangle/180*pi); le = [zeros(1,narrows) len0 wid/2 wid/2 slen0 zeros(1,narrows) -slen0 -wid/2 -wid/2 -len0 zeros(1,narrows)]; aprange = ap./limrange; aprange = [aprange aprange aprange aprange aprange aprange aprange aprange aprange aprange aprange]; D = sqrt(sum(((Xf(1:2,:)-X0(1:2,:)).*aprange).^2)); Dii=find(D==0); if ~isempty(Dii), D=D+(D==0); le(Dii)=zeros(1,length(Dii)); end; %should fix DivideByZero warnings tmp1 = X0.*(ones(4,1)*(1-le./D)) + Xf.*(ones(4,1)*(le./D)); % inverse transform if (oneax), tmp3=invT*tmp1; else, tmp1=[tmp1;tmp1;tmp1;tmp1]; tmp1=[invT invT invT invT invT invT invT invT invT invT invT].*tmp1; tmp2=zeros(4,44*narrows); tmp2(:)=tmp1(:); tmp3=zeros(4,11*narrows); tmp3(:)=sum(tmp2)'; end; pts = tmp3(1:3,:)./(ones(3,1)*tmp3(4,:)) .* axr11 + axm11; % correct for ones where the crossdir was specified ii = find(~(all(crossdir==0)|any(isnan(crossdir)))); if ~isempty(ii), D1 = [pts(:,1*narrows+ii)-pts(:,9*narrows+ii) ... pts(:,2*narrows+ii)-pts(:,8*narrows+ii) ... pts(:,3*narrows+ii)-pts(:,7*narrows+ii) ... pts(:,4*narrows+ii)-pts(:,6*narrows+ii) ... pts(:,6*narrows+ii)-pts(:,4*narrows+ii) ... pts(:,7*narrows+ii)-pts(:,3*narrows+ii) ... pts(:,8*narrows+ii)-pts(:,2*narrows+ii) ... pts(:,9*narrows+ii)-pts(:,1*narrows+ii)]/2; ii = ii'*ones(1,8) + ones(length(ii),1)*[1:4 6:9]*narrows; ii = ii(:)'; pts(:,ii) = st(:,ii) + D1; end; % readjust for reverse directions iicols=(1:narrows)'; iicols=iicols(:,ones(1,11)); iicols=iicols(:).'; tmp1=axrev(:,iicols); ii = find(tmp1(:)); if ~isempty(ii), pts(ii)=-pts(ii); end; % readjust for log scale on axes tmp1=xyzlog(:,iicols); ii = find(tmp1(:)); if ~isempty(ii), pts(ii)=10.^pts(ii); end; % compute the x,y,z coordinates of the patches; ii = narrows*(0:10)'*ones(1,narrows) + ones(11,1)*(1:narrows); ii = ii(:)'; x = zeros(11,narrows); y = zeros(11,narrows); z = zeros(11,narrows); x(:) = pts(1,ii)'; y(:) = pts(2,ii)'; z(:) = pts(3,ii)'; % do the output if (nargout<=1) % % create or modify the patches if isnan(ispatch), ispatch =0; end newpatch = ispatch & (isempty(oldh)|~strcmp(get(oldh,'Type'),'patch')); newline = ~ispatch & (isempty(oldh)|~strcmp(get(oldh,'Type'),'line')); if isempty(oldh), H=zeros(narrows,1); else, H=oldh; end; % % make or modify the arrows for k=1:narrows, if all(isnan(ud(k,[3 6])))&arrow_is2DXY(ax(k)), zz=[]; else, zz=z(:,k); end; xyz = {'XData',x(:,k),'YData',y(:,k),'ZData',zz,'Tag',ArrowTag}; if newpatch(k)|newline(k), if newpatch(k), H(k) = patch(xyz{:}); else, H(k) = line(xyz{:}); end; if ~isempty(oldh), arrow_copyprops(oldh(k),H(k)); end; else, if ispatch(k), xyz={xyz{:},'CData',[]}; end; set(H(k),xyz{:}); end; end; if ~isempty(oldh), delete(oldh(oldh~=H)); end; % % additional properties set(H,'Clipping','off'); set(H,{'UserData'},num2cell(ud,2)); if (length(extraprops)>0), set(H,extraprops{:}); end; % handle choosing arrow Start and/or Stop locations if unspecified [H,oldaxlims,errstr] = arrow_clicks(H,ud,x,y,z,ax,oldaxlims); if ~isempty(errstr), error([upper(mfilename) ' got ' errstr]); end; % set the output if (nargout>0), h=H; end; % make sure the axis limits did not change if isempty(oldaxlims), ARROW_AXLIMITS = []; else, lims = get(oldaxlims(:,1),{'XLim','YLim','ZLim'})'; lims = reshape(cat(2,lims{:}),6,size(lims,2)); %mask = arrow_is2DXY(oldaxlims(:,1)); %oldaxlims(mask,6:7) = lims(5:6,mask)'; ARROW_AXLIMITS = oldaxlims(find(any(oldaxlims(:,2:7)'~=lims)),:); if ~isempty(ARROW_AXLIMITS), warning(arrow_warnlimits(ARROW_AXLIMITS,narrows)); end; end; else, % don't create the patch, just return the data h=x; yy=y; zz=z; end; function out = arrow_defcheck(in,def,prop) % check if we got 'default' values out = in; if ~isstr(in), return; end; if size(in,1)==1 & strncmp(lower(in),'def',3), out = def; elseif ~isempty(prop), error([upper(mfilename) ' does not recognize ''' in(:)' ''' as a valid ''' prop ''' string.']); end; function [H,oldaxlims,errstr] = arrow_clicks(H,ud,x,y,z,ax,oldaxlims) % handle choosing arrow Start and/or Stop locations if necessary errstr = ''; if isempty(H)|isempty(ud)|isempty(x), return; end; % determine which (if any) need Start and/or Stop needStart = all(isnan(ud(:,1:3)'))'; needStop = all(isnan(ud(:,4:6)'))'; mask = any(needStart|needStop); if ~any(mask), return; end; ud(~mask,:)=[]; ax(:,~mask)=[]; x(:,~mask)=[]; y(:,~mask)=[]; z(:,~mask)=[]; % make them invisible for the time being set(H,'Visible','off'); % save the current axes and limits modes; set to manual for the time being oldAx = gca; limModes=get(ax(:),{'XLimMode','YLimMode','ZLimMode'}); set(ax(:),{'XLimMode','YLimMode','ZLimMode'},{'manual','manual','manual'}); % loop over each arrow that requires attention jj = find(mask); for ii=1:length(jj), h = H(jj(ii)); axes(ax(ii)); % figure out correct call if needStart(ii), prop='Start'; else, prop='Stop'; end; [wasInterrupted,errstr] = arrow_click(needStart(ii)&needStop(ii),h,prop,ax(ii)); % handle errors and control-C if wasInterrupted, delete(H(jj(ii:end))); H(jj(ii:end))=[]; oldaxlims(jj(ii:end),:)=[]; break; end; end; % restore the axes and limit modes axes(oldAx); set(ax(:),{'XLimMode','YLimMode','ZLimMode'},limModes); function [wasInterrupted,errstr] = arrow_click(lockStart,H,prop,ax) % handle the clicks for one arrow fig = get(ax,'Parent'); % save some things oldFigProps = {'Pointer','WindowButtonMotionFcn','WindowButtonUpFcn'}; oldFigValue = get(fig,oldFigProps); oldArrowProps = {'EraseMode'}; oldArrowValue = get(H,oldArrowProps); set(H,'EraseMode','background'); %because 'xor' makes shaft invisible unless Width>1 global ARROW_CLICK_H ARROW_CLICK_PROP ARROW_CLICK_AX ARROW_CLICK_USE_Z ARROW_CLICK_H=H; ARROW_CLICK_PROP=prop; ARROW_CLICK_AX=ax; ARROW_CLICK_USE_Z=~arrow_is2DXY(ax)|~arrow_planarkids(ax); set(fig,'Pointer','crosshair'); % set up the WindowButtonMotion so we can see the arrow while moving around set(fig,'WindowButtonUpFcn','set(gcf,''WindowButtonUpFcn'','''')', ... 'WindowButtonMotionFcn',''); if ~lockStart, set(H,'Visible','on'); set(fig,'WindowButtonMotionFcn',[mfilename '(''callback'',''motion'');']); end; % wait for the button to be pressed [wasKeyPress,wasInterrupted,errstr] = arrow_wfbdown(fig); % if we wanted to click-drag, set the Start point if lockStart & ~wasInterrupted, pt = arrow_point(ARROW_CLICK_AX,ARROW_CLICK_USE_Z); feval(mfilename,H,'Start',pt,'Stop',pt); set(H,'Visible','on'); ARROW_CLICK_PROP='Stop'; set(fig,'WindowButtonMotionFcn',[mfilename '(''callback'',''motion'');']); % wait for the mouse button to be released eval('waitfor(fig,''WindowButtonUpFcn'','''');','wasInterrupted=1;'); if wasInterrupted, errstr=lasterr; end; end; if ~wasInterrupted, feval(mfilename,'callback','motion'); end; % restore some things set(gcf,oldFigProps,oldFigValue); set(H,oldArrowProps,oldArrowValue); function arrow_callback(varargin) % handle redrawing callbacks if nargin==0, return; end; str = varargin{1}; if ~isstr(str), error([upper(mfilename) ' got an invalid Callback command.']); end; s = lower(str); if strcmp(s,'motion'), % motion callback global ARROW_CLICK_H ARROW_CLICK_PROP ARROW_CLICK_AX ARROW_CLICK_USE_Z feval(mfilename,ARROW_CLICK_H,ARROW_CLICK_PROP,arrow_point(ARROW_CLICK_AX,ARROW_CLICK_USE_Z)); drawnow; else, error([upper(mfilename) ' does not recognize ''' str(:).' ''' as a valid Callback option.']); end; function out = arrow_point(ax,use_z) % return the point on the given axes if nargin==0, ax=gca; end; if nargin<2, use_z=~arrow_is2DXY(ax)|~arrow_planarkids(ax); end; out = get(ax,'CurrentPoint'); out = out(1,:); if ~use_z, out=out(1:2); end; function [wasKeyPress,wasInterrupted,errstr] = arrow_wfbdown(fig) % wait for button down ignoring object ButtonDownFcn's if nargin==0, fig=gcf; end; errstr = ''; % save ButtonDownFcn values objs = findobj(fig); buttonDownFcns = get(objs,'ButtonDownFcn'); mask=~strcmp(buttonDownFcns,''); objs=objs(mask); buttonDownFcns=buttonDownFcns(mask); set(objs,'ButtonDownFcn',''); % save other figure values figProps = {'KeyPressFcn','WindowButtonDownFcn'}; figValue = get(fig,figProps); % do the real work set(fig,'KeyPressFcn','set(gcf,''KeyPressFcn'','''',''WindowButtonDownFcn'','''');', ... 'WindowButtonDownFcn','set(gcf,''WindowButtonDownFcn'','''')'); lasterr(''); wasInterrupted=0; eval('waitfor(fig,''WindowButtonDownFcn'','''');','wasInterrupted=1;'); wasKeyPress = ~wasInterrupted & strcmp(get(fig,'KeyPressFcn'),''); if wasInterrupted, errstr=lasterr; end; % restore ButtonDownFcn and other figure values set(objs,'ButtonDownFcn',buttonDownFcns); set(fig,figProps,figValue); function [out,is2D] = arrow_is2DXY(ax) % check if axes are 2-D X-Y plots % may not work for modified camera angles, etc. out = zeros(size(ax)); % 2-D X-Y plots is2D = out; % any 2-D plots views = get(ax(:),{'View'}); views = cat(1,views{:}); out(:) = abs(views(:,2))==90; is2D(:) = out(:) | all(rem(views',90)==0)'; function out = arrow_planarkids(ax) % check if axes descendents all have empty ZData (lines,patches,surfaces) out = logical(ones(size(ax))); allkids = get(ax(:),{'Children'}); for k=1:length(allkids), kids = get([findobj(allkids{k},'flat','Type','line') findobj(allkids{k},'flat','Type','patch') findobj(allkids{k},'flat','Type','surface')],{'ZData'}); for j=1:length(kids), if ~isempty(kids{j}), out(k)=logical(0); break; end; end; end; function arrow_fixlimits(axlimits) % reset the axis limits as necessary if isempty(axlimits), disp([upper(mfilename) ' does not remember any axis limits to reset.']); end; for k=1:size(axlimits,1), if any(get(axlimits(k,1),'XLim')~=axlimits(k,2:3)), set(axlimits(k,1),'XLim',axlimits(k,2:3)); end; if any(get(axlimits(k,1),'YLim')~=axlimits(k,4:5)), set(axlimits(k,1),'YLim',axlimits(k,4:5)); end; if any(get(axlimits(k,1),'ZLim')~=axlimits(k,6:7)), set(axlimits(k,1),'ZLim',axlimits(k,6:7)); end; end; function out = arrow_WarpToFill(notstretched,manualcamera,curax) % check if we are in "WarpToFill" mode. out = strcmp(get(curax,'WarpToFill'),'on'); % 'WarpToFill' is undocumented, so may need to replace this by % out = ~( any(notstretched) & any(manualcamera) ); function out = arrow_warnlimits(axlimits,narrows) % create a warning message if we've changed the axis limits msg = ''; switch (size(axlimits,1)==1) case 1, msg=''; case 2, msg='on two axes '; otherwise, msg='on several axes '; end; msg = [upper(mfilename) ' changed the axis limits ' msg ... 'when adding the arrow']; if (narrows>1), msg=[msg 's']; end; out = [msg '.' sprintf('\n') ' Call ' upper(mfilename) ... ' FIXLIMITS to reset them now.']; function arrow_copyprops(fm,to) % copy line properties to patches props = {'EraseMode','LineStyle','LineWidth','Marker','MarkerSize',... 'MarkerEdgeColor','MarkerFaceColor','ButtonDownFcn', ... 'Clipping','DeleteFcn','BusyAction','HandleVisibility', ... 'Selected','SelectionHighlight','Visible'}; lineprops = {'Color', props{:}}; patchprops = {'EdgeColor',props{:}}; patch2props = {'FaceColor',patchprops{:}}; fmpatch = strcmp(get(fm,'Type'),'patch'); topatch = strcmp(get(to,'Type'),'patch'); set(to( fmpatch& topatch),patch2props,get(fm( fmpatch& topatch),patch2props)); %p->p set(to(~fmpatch&~topatch),lineprops, get(fm(~fmpatch&~topatch),lineprops )); %l->l set(to( fmpatch&~topatch),lineprops, get(fm( fmpatch&~topatch),patchprops )); %p->l set(to(~fmpatch& topatch),patchprops, get(fm(~fmpatch& topatch),lineprops) ,'FaceColor','none'); %l->p function arrow_props % display further help info about ARROW properties c = sprintf('\n'); disp([c ... 'ARROW Properties: Default values are given in [square brackets], and other' c ... ' acceptable equivalent property names are in (parenthesis).' c c ... ' Start The starting points. For N arrows, B' c ... ' this should be a Nx2 or Nx3 matrix. /|\ ^' c ... ' Stop The end points. For N arrows, this /|||\ |' c ... ' should be a Nx2 or Nx3 matrix. //|||\\ L|' c ... ' Length Length of the arrowhead (in pixels on ///|||\\\ e|' c ... ' screen, points on a page). [16] (Len) ////|||\\\\ n|' c ... ' BaseAngle Angle (degrees) of the base angle /////|D|\\\\\ g|' c ... ' ADE. For a simple stick arrow, use //// ||| \\\\ t|' c ... ' BaseAngle=TipAngle. [90] (Base) /// ||| \\\ h|' c ... ' TipAngle Angle (degrees) of tip angle ABC. //<----->|| \\ |' c ... ' [16] (Tip) / base ||| \ V' c ... ' Width Width of the base in pixels. Not E angle ||<-------->C' c ... ' the ''LineWidth'' prop. [0] (Wid) |||tipangle' c ... ' Page If provided, non-empty, and not NaN, |||' c ... ' this causes ARROW to use hardcopy |||' c ... ' rather than onscreen proportions. A' c ... ' This is important if screen aspect --> <-- width' c ... ' ratio and hardcopy aspect ratio are ----CrossDir---->' c ... ' vastly different. []' c... ' CrossDir A vector giving the direction towards which the fletches' c ... ' on the arrow should go. [computed such that it is perpen-' c ... ' dicular to both the arrow direction and the view direction' c ... ' (i.e., as if it was pasted on a normal 2-D graph)] (Note' c ... ' that CrossDir is a vector. Also note that if an axis is' c ... ' plotted on a log scale, then the corresponding component' c ... ' of CrossDir must also be set appropriately, i.e., to 1 for' c ... ' no change in that direction, >1 for a positive change, >0' c ... ' and <1 for negative change.)' c ... ' NormalDir A vector normal to the fletch direction (CrossDir is then' c ... ' computed by the vector cross product [Line]x[NormalDir]). []' c ... ' (Note that NormalDir is a vector. Unlike CrossDir,' c ... ' NormalDir is used as is regardless of log-scaled axes.)' c ... ' Ends Set which end has an arrowhead. Valid values are ''none'',' c ... ' ''stop'', ''start'', and ''both''. [''stop''] (End)' c... ' ObjectHandles Vector of handles to previously-created arrows to be' c ... ' updated or line objects to be converted to arrows.' c ... ' [] (Object,Handle)' c ]); function out = arrow_demo % demo % create the data [x,y,z] = peaks; [ddd,out.iii]=max(z(:)); out.axlim = [min(x(:)) max(x(:)) min(y(:)) max(y(:)) min(z(:)) max(z(:))]; % modify it by inserting some NaN's [m,n] = size(z); m = floor(m/2); n = floor(n/2); z(1:m,1:n) = NaN*ones(m,n); % graph it clf('reset'); out.hs=surf(x,y,z); out.x=x; out.y=y; out.z=z; xlabel('x'); ylabel('y'); function h = arrow_demo3(in) % set the view axlim = in.axlim; axis(axlim); zlabel('z'); %set(in.hs,'FaceColor','interp'); view(viewmtx(-37.5,30,20)); title(['Demo of the capabilities of the ARROW function in 3-D']); % Normal blue arrow h1 = feval(mfilename,[axlim(1) axlim(4) 4],[-.8 1.2 4], ... 'EdgeColor','b','FaceColor','b'); % Normal white arrow, clipped by the surface h2 = feval(mfilename,axlim([1 4 6]),[0 2 4]); t=text(-2.4,2.7,7.7,'arrow clipped by surf'); % Baseangle<90 h3 = feval(mfilename,[3 .125 3.5],[1.375 0.125 3.5],30,50); t2=text(3.1,.125,3.5,'local maximum'); % Baseangle<90, fill and edge colors different h4 = feval(mfilename,axlim(1:2:5)*.5,[0 0 0],36,60,25, ... 'EdgeColor','b','FaceColor','c'); t3=text(axlim(1)*.5,axlim(3)*.5,axlim(5)*.5-.75,'origin'); set(t3,'HorizontalAlignment','center'); % Baseangle>90, black fill h5 = feval(mfilename,[-2.9 2.9 3],[-1.3 .4 3.2],30,120,[],6, ... 'EdgeColor','r','FaceColor','k','LineWidth',2); % Baseangle>90, no fill h6 = feval(mfilename,[-2.9 2.9 1.3],[-1.3 .4 1.5],30,120,[],6, ... 'EdgeColor','r','FaceColor','none','LineWidth',2); % Stick arrow h7 = feval(mfilename,[-1.6 -1.65 -6.5],[0 -1.65 -6.5],[],16,16); t4=text(-1.5,-1.65,-7.25,'global mininum'); set(t4,'HorizontalAlignment','center'); % Normal, black fill h8 = feval(mfilename,[-1.4 0 -7.2],[-1.4 0 -3],'FaceColor','k'); t5=text(-1.5,0,-7.75,'local minimum'); set(t5,'HorizontalAlignment','center'); % Gray fill, crossdir specified, 'LineStyle' -- h9 = feval(mfilename,[-3 2.2 -6],[-3 2.2 -.05],36,[],27,6,[],[0 -1 0], ... 'EdgeColor','k','FaceColor',.75*[1 1 1],'LineStyle','--'); % a series of normal arrows, linearly spaced, crossdir specified h10y=(0:4)'/3; h10 = feval(mfilename,[-3*ones(size(h10y)) h10y -6.5*ones(size(h10y))], ... [-3*ones(size(h10y)) h10y -.05*ones(size(h10y))], ... 12,[],[],[],[],[0 -1 0]); % a series of normal arrows, linearly spaced h11x=(1:.33:2.8)'; h11 = feval(mfilename,[h11x -3*ones(size(h11x)) 6.5*ones(size(h11x))], ... [h11x -3*ones(size(h11x)) -.05*ones(size(h11x))]); % series of magenta arrows, radially oriented, crossdir specified h12x=2; h12y=-3; h12z=axlim(5)/2; h12xr=1; h12zr=h12z; ir=.15;or=.81; h12t=(0:11)'/6*pi; h12 = feval(mfilename, ... [h12x+h12xr*cos(h12t)*ir h12y*ones(size(h12t)) ... h12z+h12zr*sin(h12t)*ir],[h12x+h12xr*cos(h12t)*or ... h12y*ones(size(h12t)) h12z+h12zr*sin(h12t)*or], ... 10,[],[],[],[], ... [-h12xr*sin(h12t) zeros(size(h12t)) h12zr*cos(h12t)],... 'FaceColor','none','EdgeColor','m'); % series of normal arrows, tangentially oriented, crossdir specified or13=.91; h13t=(0:.5:12)'/6*pi; locs = [h12x+h12xr*cos(h13t)*or13 h12y*ones(size(h13t)) h12z+h12zr*sin(h13t)*or13]; h13 = feval(mfilename,locs(1:end-1,:),locs(2:end,:),6); % arrow with no line ==> oriented downwards h14 = feval(mfilename,[3 3 .100001],[3 3 .1],30); t6=text(3,3,3.6,'no line'); set(t6,'HorizontalAlignment','center'); % arrow with arrowheads at both ends h15 = feval(mfilename,[-.5 -3 -3],[1 -3 -3],'Ends','both','FaceColor','g', ... 'Length',20,'Width',3,'CrossDir',[0 0 1],'TipAngle',25); h=[h1;h2;h3;h4;h5;h6;h7;h8;h9;h10;h11;h12;h13;h14;h15]; function h = arrow_demo2(in) axlim = in.axlim; dolog = 1; if (dolog), set(in.hs,'YData',10.^get(in.hs,'YData')); end; shading('interp'); view(2); title(['Demo of the capabilities of the ARROW function in 2-D']); hold on; [C,H]=contour(in.x,in.y,in.z,20,'-'); hold off; for k=H', set(k,'ZData',(axlim(6)+1)*ones(size(get(k,'XData'))),'Color','k'); if (dolog), set(k,'YData',10.^get(k,'YData')); end; end; if (dolog), axis([axlim(1:2) 10.^axlim(3:4)]); set(gca,'YScale','log'); else, axis(axlim(1:4)); end; % Normal blue arrow start = [axlim(1) axlim(4) axlim(6)+2]; stop = [in.x(in.iii) in.y(in.iii) axlim(6)+2]; if (dolog), start(:,2)=10.^start(:,2); stop(:,2)=10.^stop(:,2); end; h1 = feval(mfilename,start,stop,'EdgeColor','b','FaceColor','b'); % three arrows with varying fill, width, and baseangle start = [-3 -3 10; -3 -1.5 10; -1.5 -3 10]; stop = [-.03 -.03 10; -.03 -1.5 10; -1.5 -.03 10]; if (dolog), start(:,2)=10.^start(:,2); stop(:,2)=10.^stop(:,2); end; h2 = feval(mfilename,start,stop,24,[90;60;120],[],[0;0;4],'Ends',str2mat('both','stop','stop')); set(h2(2),'EdgeColor',[0 .35 0],'FaceColor',[0 .85 .85]); set(h2(3),'EdgeColor','r','FaceColor',[1 .5 1]); h=[h1;h2];