andrewm@68: The D-Box code can be built on the board using the scripts included with
giuliomoro@301: Bela. To build the code, do the following from the scripts/ directory:
andrewm@68: 
giuliomoro@301: ./setup_board.sh    # Only if Bela is not already copied to the board
andrewm@68: ./build_project.sh -n ../projects/d-box  # -n means don't run yet
andrewm@68: 
andrewm@68: You will now need to copy the .dbx sound files to the box. These need to
andrewm@68: be in a directory: /root/d-box/sounds
andrewm@68: 
andrewm@68: Log into the board via ssh to create the d-box directory, or run:
andrewm@68: 
andrewm@68: ssh root@192.168.7.2 "mkdir /root/d-box"
andrewm@68: 
andrewm@68: Now copy the .dbx files from a source of your choice to the board. Assuming
andrewm@68: they are in a directory called "sounds":
andrewm@68: 
andrewm@68: scp -r sounds root@192.168.7.2:/root/d-box/
andrewm@68: 
andrewm@68: Now you can run the D-Box program to make sure it plays. You will need the
andrewm@68: sensors and matrix connected to the box (i.e. a complete hardware D-Box).
andrewm@68: From the scripts/ directory:
andrewm@68: 
andrewm@68: ./run_project.sh -f -c "-q 24 -r 25 -t 2 -s -p 2 -l 0 -u 0 -i 1 -n f -g 3 -v"
andrewm@68: 
andrewm@68: If this plays properly, the D-Box can then be set to run automatically on boot:
andrewm@68: 
andrewm@68: ./set_startup.sh -l -c "-q 24 -r 25 -t 2 -s -p 2 -l 0 -u 0 -i 1 -n f -g 3 -v"
andrewm@68: 
andrewm@68: If at any time you want to stop the D-Box program running, you can run:
andrewm@68: 
andrewm@68: ./stop_running.sh
andrewm@68: 
andrewm@68: To turn off further autoboot, run:
andrewm@68: 
andrewm@68: ./set_startup.sh -n