Mercurial > hg > beaglert
view resources/am335x-boneblack.dts @ 514:ce5bb14c21fb prerelease
update_board checks for board active at the beginning. ANY key is good for exiting
| author | Giulio Moro <giuliomoro@yahoo.it> |
|---|---|
| date | Wed, 22 Jun 2016 12:40:28 +0100 |
| parents | a37f011549fc |
| children |
line wrap: on
line source
/dts-v1/; / { #address-cells = <0x1>; #size-cells = <0x1>; compatible = "ti,am335x-bone", "ti,am33xx"; interrupt-parent = <0x1>; model = "TI AM335x BeagleBone"; chosen { }; aliases { serial0 = "/ocp/serial@44e09000"; serial1 = "/ocp/serial@48022000"; serial2 = "/ocp/serial@48024000"; serial3 = "/ocp/serial@481a6000"; serial4 = "/ocp/serial@481a8000"; serial5 = "/ocp/serial@481aa000"; }; memory { device_type = "memory"; reg = <0x80000000 0x10000000>; }; cpus { cpu@0 { compatible = "arm,cortex-a8"; operating-points = <0xf4240 0x149970 0xc3500 0x13d620 0x927c0 0x10f7c0 0x493e0 0xec928>; voltage-tolerance = <0x2>; clock-latency = <0x493e0>; cpu0-supply = <0x2>; linux,phandle = <0x12>; phandle = <0x12>; }; }; soc { compatible = "ti,omap-infra"; mpu { compatible = "ti,omap3-mpu"; ti,hwmods = "mpu"; }; }; pinmux@44e10800 { compatible = "pinctrl-single"; reg = <0x44e10800 0x238>; #address-cells = <0x1>; #size-cells = <0x0>; pinctrl-single,register-width = <0x20>; pinctrl-single,function-mask = <0x7f>; pinctrl-names = "default"; pinctrl-0 = <0x3>; linux,phandle = <0x13>; phandle = <0x13>; pinmux_userled_pins { pinctrl-single,pins = <0x54 0x7 0x58 0x17 0x5c 0x7 0x60 0x17 // /*PRU1 GPO 0-7*/ 0xa0 0x05 0xa4 0x05 0xa8 0x05 0xac 0x05 0xb0 0x05 0xb4 0x05 0xb8 0x05 0xbc 0x05 /*GPIOrt pins*/ 0x90 0x27 0x94 0x27 0x9c 0x27 0x98 0x27 0x34 0x27 0x30 0x27 0x78 0x27 0x48 0x27 0x3c 0x27 0x38 0x27 0x4c 0x27 0x8c 0x27 0xe0 0x27 0xe8 0x27 0xe4 0x27 0xec 0x27 // /*GPIOrt pins with PRU0 gpo*/ 0x90 0x27 0x94 0x27 0x9c 0x27 0x98 0x27 0x34 0x06 0x30 0x06 0x78 0x27 0x48 0x27 0x3c 0x27 0x38 0x27 0x4c 0x27 0x8c 0x27 0xe0 0x27 0xe8 0x27 0xe4 0x27 0xec 0x27 >; linux,phandle = <0x3>; phandle = <0x3>; }; pinmux_i2c0_pins { pinctrl-single,pins = <0x188 0x70 0x18c 0x70>; linux,phandle = <0x6>; phandle = <0x6>; }; pinmux_i2c1_pins { pinctrl-single,pins = <0x180 0x73 0x184 0x73>; linux,phandle = <0x7>; phandle = <0x7>; }; pinmux_i2c2_pins { pinctrl-single,pins = <0x178 0x73 0x17c 0x73>; linux,phandle = <0x8>; phandle = <0x8>; }; pinmux_rstctl_pins { pinctrl-single,pins = <0x50 0x17>; linux,phandle = <0x4>; phandle = <0x4>; }; }; ocp { compatible = "simple-bus"; #address-cells = <0x1>; #size-cells = <0x1>; ranges; ti,hwmods = "l3_main"; linux,phandle = <0x14>; phandle = <0x14>; interrupt-controller@48200000 { compatible = "ti,omap2-intc"; interrupt-controller; #interrupt-cells = <0x1>; ti,intc-size = <0x80>; reg = <0x48200000 0x1000>; linux,phandle = <0x1>; phandle = <0x1>; }; edma@49000000 { compatible = "ti,edma3"; ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; reg = <0x49000000 0x10000 0x44e10f90 0x40>; interrupt-parent = <0x1>; interrupts = <0xc 0xd 0xe>; #dma-cells = <0x1>; dma-channels = <0x40>; ti,edma-regions = <0x4>; ti,edma-slots = <0x100>; ti,edma-queue-tc-map = <0x0 0x0 0x1 0x1 0x2 0x2>; ti,edma-queue-priority-map = <0x0 0x0 0x1 0x1 0x2 0x2>; ti,edma-default-queue = <0x1>; ti,edma-xbar-event-map = <0x20 0xc 0x1e 0x14>; linux,phandle = <0x9>; phandle = <0x9>; }; gpio@44e07000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <0x2>; interrupt-controller; #interrupt-cells = <0x1>; reg = <0x44e07000 0x1000>; interrupts = <0x60>; linux,phandle = <0x15>; phandle = <0x15>; }; gpio@4804c000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <0x2>; interrupt-controller; #interrupt-cells = <0x1>; reg = <0x4804c000 0x1000>; interrupts = <0x62>; linux,phandle = <0x5>; phandle = <0x5>; }; gpio@481ac000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <0x2>; interrupt-controller; #interrupt-cells = <0x1>; reg = <0x481ac000 0x1000>; interrupts = <0x20>; linux,phandle = <0x16>; phandle = <0x16>; }; gpio@481ae000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <0x2>; interrupt-controller; #interrupt-cells = <0x1>; reg = <0x481ae000 0x1000>; interrupts = <0x3e>; linux,phandle = <0x17>; phandle = <0x17>; }; rstctl@0 { status = "okay"; compatible = "gpio-rctrl"; pinctrl-names = "default"; pinctrl-0 = <0x4>; #reset-cells = <0x2>; gpios = <0x5 0x14 0x0>; gpio-names = "eMMC_RSTn"; linux,phandle = <0xb>; phandle = <0xb>; }; serial@44e09000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <0x2dc6c00>; reg = <0x44e09000 0x2000>; interrupts = <0x48>; status = "okay"; linux,phandle = <0x18>; phandle = <0x18>; }; serial@48022000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <0x2dc6c00>; reg = <0x48022000 0x2000>; interrupts = <0x49>; status = "okay"; linux,phandle = <0x19>; phandle = <0x19>; }; serial@48024000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <0x2dc6c00>; reg = <0x48024000 0x2000>; interrupts = <0x4a>; status = "disabled"; linux,phandle = <0x1a>; phandle = <0x1a>; }; serial@481a6000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <0x2dc6c00>; reg = <0x481a6000 0x2000>; interrupts = <0x2c>; status = "disabled"; linux,phandle = <0x1b>; phandle = <0x1b>; }; serial@481a8000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <0x2dc6c00>; reg = <0x481a8000 0x2000>; interrupts = <0x2d>; status = "disabled"; linux,phandle = <0x1c>; phandle = <0x1c>; }; serial@481aa000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <0x2dc6c00>; reg = <0x481aa000 0x2000>; interrupts = <0x2e>; status = "disabled"; linux,phandle = <0x1d>; phandle = <0x1d>; }; i2c@44e0b000 { compatible = "ti,omap4-i2c"; #address-cells = <0x1>; #size-cells = <0x0>; ti,hwmods = "i2c1"; reg = <0x44e0b000 0x1000>; interrupts = <0x46>; status = "okay"; clock-frequency = <0x61a80>; pinctrl-names = "default"; pinctrl-0 = <0x6>; linux,phandle = <0x1e>; phandle = <0x1e>; tps@24 { reg = <0x24>; compatible = "ti,tps65217"; ti,pmic-shutdown-controller; linux,phandle = <0x1f>; phandle = <0x1f>; regulators { #address-cells = <0x1>; #size-cells = <0x0>; regulator@0 { reg = <0x0>; regulator-compatible = "dcdc1"; regulator-always-on; linux,phandle = <0x20>; phandle = <0x20>; }; regulator@1 { reg = <0x1>; regulator-compatible = "dcdc2"; regulator-name = "vdd_mpu"; regulator-min-microvolt = <0xe1d48>; regulator-max-microvolt = <0x1437c8>; regulator-boot-on; regulator-always-on; linux,phandle = <0x2>; phandle = <0x2>; }; regulator@2 { reg = <0x2>; regulator-compatible = "dcdc3"; regulator-name = "vdd_core"; regulator-min-microvolt = <0xe1d48>; regulator-max-microvolt = <0x118c30>; regulator-boot-on; regulator-always-on; linux,phandle = <0x21>; phandle = <0x21>; }; regulator@3 { reg = <0x3>; regulator-compatible = "ldo1"; regulator-always-on; linux,phandle = <0x22>; phandle = <0x22>; }; regulator@4 { reg = <0x4>; regulator-compatible = "ldo2"; regulator-always-on; linux,phandle = <0x23>; phandle = <0x23>; }; regulator@5 { reg = <0x5>; regulator-compatible = "ldo3"; regulator-min-microvolt = <0x1b7740>; regulator-max-microvolt = <0x1b7740>; regulator-always-on; linux,phandle = <0x24>; phandle = <0x24>; }; regulator@6 { reg = <0x6>; regulator-compatible = "ldo4"; regulator-always-on; linux,phandle = <0x25>; phandle = <0x25>; }; }; }; baseboard_eeprom@50 { compatible = "at,24c256"; reg = <0x50>; linux,phandle = <0xd>; phandle = <0xd>; }; }; i2c@4802a000 { compatible = "ti,omap4-i2c"; #address-cells = <0x1>; #size-cells = <0x0>; ti,hwmods = "i2c2"; reg = <0x4802a000 0x1000>; interrupts = <0x47>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <0x7>; clock-frequency = <0x61a80>; linux,phandle = <0x26>; phandle = <0x26>; }; i2c@4819c000 { compatible = "ti,omap4-i2c"; #address-cells = <0x1>; #size-cells = <0x0>; ti,hwmods = "i2c3"; reg = <0x4819c000 0x1000>; interrupts = <0x1e>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <0x8>; clock-frequency = <0x186a0>; linux,phandle = <0x27>; phandle = <0x27>; cape_eeprom0@54 { compatible = "at,24c256"; reg = <0x54>; linux,phandle = <0xe>; phandle = <0xe>; }; cape_eeprom1@55 { compatible = "at,24c256"; reg = <0x55>; linux,phandle = <0xf>; phandle = <0xf>; }; cape_eeprom2@56 { compatible = "at,24c256"; reg = <0x56>; linux,phandle = <0x10>; phandle = <0x10>; }; cape_eeprom3@57 { compatible = "at,24c256"; reg = <0x57>; linux,phandle = <0x11>; phandle = <0x11>; }; }; mmc@48060000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; ti,needs-special-hs-handling; dmas = <0x9 0x18 0x9 0x19>; dma-names = "tx", "rx"; status = "okay"; vmmc-supply = <0xa>; ti,vcc-aux-disable-is-sleep; linux,phandle = <0x28>; phandle = <0x28>; }; mmc@481d8000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc2"; ti,needs-special-reset; ti,needs-special-hs-handling; dmas = <0x9 0x2 0x9 0x3>; dma-names = "tx", "rx"; status = "okay"; vmmc-supply = <0xa>; bus-width = <0x8>; ti,non-removable; reset = <0xb 0x0 0x0>; reset-names = "eMMC_RSTn-CONSUMER"; linux,phandle = <0x29>; phandle = <0x29>; }; mmc@47810000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc3"; ti,needs-special-reset; ti,needs-special-hs-handling; status = "disabled"; linux,phandle = <0x2a>; phandle = <0x2a>; }; wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; reg = <0x44e35000 0x1000>; interrupts = <0x5b>; linux,phandle = <0x2b>; phandle = <0x2b>; }; d_can@481cc000 { compatible = "bosch,d_can"; ti,hwmods = "d_can0"; reg = <0x481cc000 0x2000>; interrupts = <0x34>; status = "disabled"; linux,phandle = <0x2c>; phandle = <0x2c>; }; d_can@481d0000 { compatible = "bosch,d_can"; ti,hwmods = "d_can1"; reg = <0x481d0000 0x2000>; interrupts = <0x37>; status = "disabled"; linux,phandle = <0x2d>; phandle = <0x2d>; }; timer@44e31000 { compatible = "ti,omap2-timer"; reg = <0x44e31000 0x400>; interrupts = <0x43>; ti,hwmods = "timer1"; ti,timer-alwon; linux,phandle = <0x2e>; phandle = <0x2e>; }; timer@48040000 { compatible = "ti,omap2-timer"; reg = <0x48040000 0x400>; interrupts = <0x44>; ti,hwmods = "timer2"; linux,phandle = <0x2f>; phandle = <0x2f>; }; timer@48042000 { compatible = "ti,omap2-timer"; reg = <0x48042000 0x400>; interrupts = <0x45>; ti,hwmods = "timer3"; linux,phandle = <0x30>; phandle = <0x30>; }; timer@48044000 { compatible = "ti,omap2-timer"; reg = <0x48044000 0x400>; interrupts = <0x5c>; ti,hwmods = "timer4"; ti,timer-pwm; linux,phandle = <0x31>; phandle = <0x31>; }; timer@48046000 { compatible = "ti,omap2-timer"; reg = <0x48046000 0x400>; interrupts = <0x5d>; ti,hwmods = "timer5"; ti,timer-pwm; linux,phandle = <0x32>; phandle = <0x32>; }; timer@48048000 { compatible = "ti,omap2-timer"; reg = <0x48048000 0x400>; interrupts = <0x5e>; ti,hwmods = "timer6"; ti,timer-pwm; linux,phandle = <0x33>; phandle = <0x33>; }; timer@4804a000 { compatible = "ti,omap2-timer"; reg = <0x4804a000 0x400>; interrupts = <0x5f>; ti,hwmods = "timer7"; ti,timer-pwm; linux,phandle = <0x34>; phandle = <0x34>; }; pruss@4a300000 { compatible = "ti,pruss-v2"; ti,hwmods = "pruss"; ti,deassert-hard-reset = "pruss", "pruss"; reg = <0x4a300000 0x80000>; ti,pintc-offset = <0x20000>; interrupt-parent = <0x1>; status = "disabled"; interrupts = <0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1b>; linux,phandle = <0x35>; phandle = <0x35>; }; rtc@44e3e000 { compatible = "ti,da830-rtc"; reg = <0x44e3e000 0x1000>; interrupts = <0x4b 0x4c>; ti,hwmods = "rtc"; ti,system-power-controller; }; spi@48030000 { compatible = "ti,omap4-mcspi"; #address-cells = <0x1>; #size-cells = <0x0>; reg = <0x48030000 0x400>; interrupt = <0x41>; ti,spi-num-cs = <0x2>; ti,hwmods = "spi0"; dmas = <0x9 0x10 0x9 0x11 0x9 0x12 0x9 0x13>; dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; linux,phandle = <0x36>; phandle = <0x36>; }; spi@481a0000 { compatible = "ti,omap4-mcspi"; #address-cells = <0x1>; #size-cells = <0x0>; reg = <0x481a0000 0x400>; interrupt = <0x7d>; ti,spi-num-cs = <0x2>; ti,hwmods = "spi1"; dmas = <0x9 0x2a 0x9 0x2b 0x9 0x2c 0x9 0x2d>; dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; linux,phandle = <0x37>; phandle = <0x37>; }; gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; reg = <0x50000000 0x1000000>; interrupts = <0x64>; gpmc,num-cs = <0x7>; gpmc,num-waitpins = <0x2>; #address-cells = <0x2>; #size-cells = <0x1>; status = "disabled"; linux,phandle = <0x38>; phandle = <0x38>; }; nop-phy@0 { compatible = "nop-xceiv-usb"; }; nop-phy@1 { compatible = "nop-xceiv-usb"; }; usb@47400000 { compatible = "ti,musb-am33xx"; reg = <0x47400000 0x1000 0x47401000 0x800 0x47401800 0x800>; interrupts = <0x11 0x12 0x13>; multipoint = <0x1>; num-eps = <0x10>; ram-bits = <0xc>; port0-mode = <0x3>; port1-mode = <0x1>; power = <0xfa>; ti,hwmods = "usb_otg_hs"; status = "okay"; interface_type = <0x1>; linux,phandle = <0x39>; phandle = <0x39>; }; ethernet@4a100000 { compatible = "ti,cpsw"; ti,hwmods = "cpgmac0"; cpdma_channels = <0x8>; ale_entries = <0x400>; bd_ram_size = <0x2000>; no_bd_ram = <0x0>; rx_descs = <0x40>; mac_control = <0x20>; slaves = <0x2>; cpts_active_slave = <0x0>; cpts_clock_mult = <0x80000000>; cpts_clock_shift = <0x1d>; reg = <0x4a100000 0x800 0x4a101200 0x100>; #address-cells = <0x1>; #size-cells = <0x1>; interrupt-parent = <0x1>; interrupts = <0x28 0x29 0x2a 0x2b>; ranges; disable-napi; linux,phandle = <0x3a>; phandle = <0x3a>; mdio@4a101000 { compatible = "ti,davinci_mdio"; #address-cells = <0x1>; #size-cells = <0x0>; ti,hwmods = "davinci_mdio"; bus_freq = <0xf4240>; reg = <0x4a101000 0x100>; linux,phandle = <0xc>; phandle = <0xc>; }; slave@4a100200 { mac-address = [00 00 00 00 00 00]; phy_id = <0xc 0x0>; linux,phandle = <0x3b>; phandle = <0x3b>; }; slave@4a100300 { mac-address = [00 00 00 00 00 00]; phy_id = <0xc 0x1>; linux,phandle = <0x3c>; phandle = <0x3c>; }; }; tscadc@44e0d000 { compatible = "ti,ti-tscadc"; reg = <0x44e0d000 0x1000>; interrupt-parent = <0x1>; interrupts = <0x10>; ti,hwmods = "adc_tsc"; status = "disabled"; linux,phandle = <0x3d>; phandle = <0x3d>; }; lcdc@4830e000 { compatible = "ti,am3352-lcdc", "ti,da830-lcdc"; reg = <0x4830e000 0x1000>; interrupts = <0x24>; status = "disabled"; ti,hwmods = "lcdc"; linux,phandle = <0x3e>; phandle = <0x3e>; }; epwmss@48300000 { compatible = "ti,am33xx-pwmss"; reg = <0x48300000 0x10>; ti,hwmods = "epwmss0"; #address-cells = <0x1>; #size-cells = <0x1>; status = "disabled"; ranges = <0x48300100 0x48300100 0x80 0x48300180 0x48300180 0x80 0x48300200 0x48300200 0x80>; linux,phandle = <0x3f>; phandle = <0x3f>; ecap@48300100 { compatible = "ti,am33xx-ecap"; #pwm-cells = <0x3>; reg = <0x48300100 0x80>; ti,hwmods = "ecap0"; status = "disabled"; linux,phandle = <0x40>; phandle = <0x40>; }; ehrpwm@48300200 { compatible = "ti,am33xx-ehrpwm"; #pwm-cells = <0x3>; reg = <0x48300200 0x80>; ti,hwmods = "ehrpwm0"; status = "disabled"; linux,phandle = <0x41>; phandle = <0x41>; }; }; epwmss@48302000 { compatible = "ti,am33xx-pwmss"; reg = <0x48302000 0x10>; ti,hwmods = "epwmss1"; #address-cells = <0x1>; #size-cells = <0x1>; status = "disabled"; ranges = <0x48302100 0x48302100 0x80 0x48302180 0x48302180 0x80 0x48302200 0x48302200 0x80>; linux,phandle = <0x42>; phandle = <0x42>; ecap@48302100 { compatible = "ti,am33xx-ecap"; #pwm-cells = <0x3>; reg = <0x48302100 0x80>; ti,hwmods = "ecap1"; status = "disabled"; linux,phandle = <0x43>; phandle = <0x43>; }; ehrpwm@48302200 { compatible = "ti,am33xx-ehrpwm"; #pwm-cells = <0x3>; reg = <0x48302200 0x80>; ti,hwmods = "ehrpwm1"; status = "disabled"; linux,phandle = <0x44>; phandle = <0x44>; }; }; epwmss@48304000 { compatible = "ti,am33xx-pwmss"; reg = <0x48304000 0x10>; ti,hwmods = "epwmss2"; #address-cells = <0x1>; #size-cells = <0x1>; status = "disabled"; ranges = <0x48304100 0x48304100 0x80 0x48304180 0x48304180 0x80 0x48304200 0x48304200 0x80>; linux,phandle = <0x45>; phandle = <0x45>; ecap@48304100 { compatible = "ti,am33xx-ecap"; #pwm-cells = <0x3>; reg = <0x48304100 0x80>; ti,hwmods = "ecap2"; status = "disabled"; linux,phandle = <0x46>; phandle = <0x46>; }; ehrpwm@48304200 { compatible = "ti,am33xx-ehrpwm"; #pwm-cells = <0x3>; reg = <0x48304200 0x80>; ti,hwmods = "ehrpwm2"; status = "disabled"; linux,phandle = <0x47>; phandle = <0x47>; }; }; sham@53100000 { compatible = "ti,omap4-sham"; ti,hwmods = "sham"; #address-cells = <0x1>; #size-cells = <0x0>; reg = <0x53100000 0x200>; interrupt-parent = <0x1>; interrupts = <0x6d>; dmas = <0x9 0x24>; dma-names = "rx"; status = "okay"; linux,phandle = <0x48>; phandle = <0x48>; }; aes@53500000 { compatible = "ti,omap4-aes"; ti,hwmods = "aes"; #address-cells = <0x1>; #size-cells = <0x0>; reg = <0x53500000 0xa0>; interrupt-parent = <0x1>; interrupts = <0x66>; dmas = <0x9 0x6 0x9 0x5>; dma-names = "tx", "rx"; status = "okay"; linux,phandle = <0x49>; phandle = <0x49>; }; mcasp@48038000 { compatible = "ti,omap2-mcasp-audio"; #address-cells = <0x1>; #size-cells = <0x0>; ti,hwmods = "mcasp0"; reg = <0x48038000 0x2000>; interrupts = <0x50 0x51>; status = "disabled"; asp-chan-q = <0x2>; tx-dma-offset = <0x46000000>; rx-dma-offset = <0x46000000>; dmas = <0x9 0x8 0x9 0x9>; dma-names = "tx", "rx"; linux,phandle = <0x4a>; phandle = <0x4a>; }; mcasp@4803C000 { compatible = "ti,omap2-mcasp-audio"; #address-cells = <0x1>; #size-cells = <0x0>; ti,hwmods = "mcasp1"; reg = <0x4803c000 0x2000>; interrupts = <0x52 0x53>; status = "disabled"; asp-chan-q = <0x2>; tx-dma-offset = <0x46400000>; rx-dma-offset = <0x46400000>; dmas = <0x9 0xa 0x9 0xb>; dma-names = "tx", "rx"; linux,phandle = <0x4b>; phandle = <0x4b>; }; gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <0x3>; led0 { label = "beaglebone:green:usr0"; gpios = <0x5 0x15 0x0>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led1 { label = "beaglebone:green:usr1"; gpios = <0x5 0x16 0x0>; linux,default-trigger = "mmc0"; default-state = "off"; }; led2 { label = "beaglebone:green:usr2"; gpios = <0x5 0x17 0x0>; linux,default-trigger = "cpu0"; default-state = "off"; }; led3 { label = "beaglebone:green:usr3"; gpios = <0x5 0x18 0x0>; default-state = "off"; linux,default-trigger = "mmc1"; }; }; }; bone_capemgr { compatible = "ti,bone-capemgr"; status = "okay"; eeprom = <0xd>; baseboardmaps { board@0 { board-name = "A335BONE"; compatible-name = "ti,beaglebone"; linux,phandle = <0x4c>; phandle = <0x4c>; }; board@1 { board-name = "A335BNLT"; compatible-name = "ti,beaglebone-black"; linux,phandle = <0x4d>; phandle = <0x4d>; }; }; slots { slot@0 { eeprom = <0xe>; }; slot@1 { eeprom = <0xf>; }; slot@2 { eeprom = <0x10>; }; slot@3 { eeprom = <0x11>; }; slot@5 { ti,cape-override; compatible = "kernel-command-line", "runtime"; board-name = "Bone-Geiger"; version = "00A0"; manufacturer = "Geiger Inc."; part-number = "BB-BONE-GEIGER"; }; slot@7 { ti,cape-override; compatible = "kernel-command-line", "runtime"; board-name = "Bone-Nixie"; version = "00A0"; manufacturer = "Ranostay Industries"; part-number = "BB-BONE-NIXIE"; }; slot@8 { ti,cape-override; compatible = "kernel-command-line", "runtime"; board-name = "Bone-TFT"; version = "00A0"; manufacturer = "Adafruit"; part-number = "BB-BONE-TFT-01"; }; slot@9 { ti,cape-override; compatible = "kernel-command-line", "runtime"; board-name = "Bone-RTC"; version = "00A0"; manufacturer = "Adafruit"; part-number = "BB-BONE-RTC-01"; }; slot@10 { ti,cape-override; compatible = "kernel-command-line", "runtime"; board-name = "Bone-Hexy"; version = "00A0"; manufacturer = "Koen Kooi"; part-number = "BB-BONE-HEXY-01"; }; slot@11 { ti,cape-override; compatible = "kernel-command-line", "runtime"; board-name = "Bone-MRF24J40"; version = "00A0"; manufacturer = "Signal 11 Software"; part-number = "BB-BONE-MRF24J40"; }; slot@100 { ti,cape-override; priority = <0x1>; compatible = "ti,beaglebone-black"; board-name = "Bone-LT-eMMC-2G"; version = "00A0"; manufacturer = "Texas Instruments"; part-number = "BB-BONE-EMMC-2G"; }; slot@101 { ti,cape-override; priority = <0x1>; compatible = "ti,beaglebone-black"; board-name = "Bone-Black-HDMI"; version = "00A0"; manufacturer = "Texas Instruments"; part-number = "BB-BONELT-HDMI"; }; }; capemaps { cape@0 { part-number = "BB-BONE-DVID-01"; version@00A0 { version = "00A0"; dtbo = "cape-bone-dvi-00A0.dtbo"; }; version@00A1 { version = "00A1", "01"; dtbo = "cape-bone-dvi-00A1.dtbo"; }; version@00A2 { version = "00A2", "A2"; dtbo = "cape-bone-dvi-00A2.dtbo"; }; version@00A3 { version = "00A3"; dtbo = "cape-bone-dvi-00A2.dtbo"; }; }; cape@1 { part-number = "BB-BONE-EMMC-2G"; version@00A0 { version = "00A0"; dtbo = "cape-bone-2g-emmc1.dtbo"; }; }; cape@2 { part-number = "BB-BONE-GEIGER"; version@00A0 { version = "00A0"; dtbo = "cape-bone-geiger-00A0.dtbo"; }; }; cape@3 { part-number = "BB-BONE-LCD3-01"; version@00A0 { version = "00A0"; dtbo = "cape-bone-lcd3-00A0.dtbo"; }; version@00A2 { version = "00A2"; dtbo = "cape-bone-lcd3-00A2.dtbo"; }; }; cape@4 { part-number = "BB-BONE-WTHR-01"; version@00A0 { version = "00A0"; dtbo = "cape-bone-weather-00A0.dtbo"; }; }; cape@5 { part-number = "BB-BONELT-HDMI"; version@00A0 { version = "00A0"; dtbo = "cape-boneblack-hdmi-00A0.dtbo"; }; }; cape@6 { part-number = "BB-BONE-NIXIE"; version@00A0 { version = "00A0"; dtbo = "cape-bone-nixie-00A0.dtbo"; }; }; cape@7 { part-number = "BB-BONE-TFT-01"; version@00A0 { version = "00A0"; dtbo = "cape-bone-adafruit-lcd-00A0.dtbo"; }; }; cape@8 { part-number = "BB-BONE-RTC-01"; version@00A0 { version = "00A0"; dtbo = "cape-bone-adafruit-rtc-00A0.dtbo"; }; }; cape@9 { part-number = "BB-BONE-HEXY-01"; version@00A0 { version = "00A0"; dtbo = "cape-bone-hexy-00A0.dtbo"; }; }; cape@10 { part-number = "BB-BONE-MRF24J40"; version@00A0 { version = "00A0"; dtbo = "cape-bone-mrf24j40-00A0.dtbo"; }; }; cape@11 { part-number = "BB-BONE-EXPTEST"; version@00A0 { version = "00A0"; dtbo = "cape-bone-exptest-00A0.dtbo"; }; }; }; }; fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <0x325aa0>; regulator-max-microvolt = <0x325aa0>; linux,phandle = <0xa>; phandle = <0xa>; }; __symbols__ { cpu = "/cpus/cpu@0"; am33xx_pinmux = "/pinmux@44e10800"; userled_pins = "/pinmux@44e10800/pinmux_userled_pins"; i2c0_pins = "/pinmux@44e10800/pinmux_i2c0_pins"; i2c1_pins = "/pinmux@44e10800/pinmux_i2c1_pins"; i2c2_pins = "/pinmux@44e10800/pinmux_i2c2_pins"; rstctl_pins = "/pinmux@44e10800/pinmux_rstctl_pins"; ocp = "/ocp"; intc = "/ocp/interrupt-controller@48200000"; edma = "/ocp/edma@49000000"; gpio1 = "/ocp/gpio@44e07000"; gpio2 = "/ocp/gpio@4804c000"; gpio3 = "/ocp/gpio@481ac000"; gpio4 = "/ocp/gpio@481ae000"; rstctl = "/ocp/rstctl@0"; uart1 = "/ocp/serial@44e09000"; uart2 = "/ocp/serial@48022000"; uart3 = "/ocp/serial@48024000"; uart4 = "/ocp/serial@481a6000"; uart5 = "/ocp/serial@481a8000"; uart6 = "/ocp/serial@481aa000"; i2c0 = "/ocp/i2c@44e0b000"; tps = "/ocp/i2c@44e0b000/tps@24"; dcdc1_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@0"; dcdc2_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@1"; dcdc3_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@2"; ldo1_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@3"; ldo2_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@4"; ldo3_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@5"; ldo4_reg = "/ocp/i2c@44e0b000/tps@24/regulators/regulator@6"; baseboard_eeprom = "/ocp/i2c@44e0b000/baseboard_eeprom@50"; i2c1 = "/ocp/i2c@4802a000"; i2c2 = "/ocp/i2c@4819c000"; cape_eeprom0 = "/ocp/i2c@4819c000/cape_eeprom0@54"; cape_eeprom1 = "/ocp/i2c@4819c000/cape_eeprom1@55"; cape_eeprom2 = "/ocp/i2c@4819c000/cape_eeprom2@56"; cape_eeprom3 = "/ocp/i2c@4819c000/cape_eeprom3@57"; mmc1 = "/ocp/mmc@48060000"; mmc2 = "/ocp/mmc@481d8000"; mmc3 = "/ocp/mmc@47810000"; wdt2 = "/ocp/wdt@44e35000"; dcan0 = "/ocp/d_can@481cc000"; dcan1 = "/ocp/d_can@481d0000"; timer1 = "/ocp/timer@44e31000"; timer2 = "/ocp/timer@48040000"; timer3 = "/ocp/timer@48042000"; timer4 = "/ocp/timer@48044000"; timer5 = "/ocp/timer@48046000"; timer6 = "/ocp/timer@48048000"; timer7 = "/ocp/timer@4804a000"; pruss = "/ocp/pruss@4a300000"; spi0 = "/ocp/spi@48030000"; spi1 = "/ocp/spi@481a0000"; gpmc = "/ocp/gpmc@50000000"; usb_otg_hs = "/ocp/usb@47400000"; mac = "/ocp/ethernet@4a100000"; davinci_mdio = "/ocp/ethernet@4a100000/mdio@4a101000"; cpsw_emac0 = "/ocp/ethernet@4a100000/slave@4a100200"; cpsw_emac1 = "/ocp/ethernet@4a100000/slave@4a100300"; tscadc = "/ocp/tscadc@44e0d000"; lcdc = "/ocp/lcdc@4830e000"; epwmss0 = "/ocp/epwmss@48300000"; ecap0 = "/ocp/epwmss@48300000/ecap@48300100"; ehrpwm0 = "/ocp/epwmss@48300000/ehrpwm@48300200"; epwmss1 = "/ocp/epwmss@48302000"; ecap1 = "/ocp/epwmss@48302000/ecap@48302100"; ehrpwm1 = "/ocp/epwmss@48302000/ehrpwm@48302200"; epwmss2 = "/ocp/epwmss@48304000"; ecap2 = "/ocp/epwmss@48304000/ecap@48304100"; ehrpwm2 = "/ocp/epwmss@48304000/ehrpwm@48304200"; sham = "/ocp/sham@53100000"; aes = "/ocp/aes@53500000"; mcasp0 = "/ocp/mcasp@48038000"; mcasp1 = "/ocp/mcasp@4803C000"; baseboard_beaglebone = "/bone_capemgr/baseboardmaps/board@0"; baseboard_beaglebone_black = "/bone_capemgr/baseboardmaps/board@1"; vmmcsd_fixed = "/fixedregulator@0"; }; };