annotate resources/shutdown_switch.sh @ 537:bfcbeb437869 API-update

Updated RTAudioSettings with in/out, ported some examples and libpd

#!/bin/bash
#
# shutdown_switch.sh: script for gracefully halting the BeagleBone Black
# when an onboard button is pressed. 
#
# (c) 2016 Andrew McPherson, C4DM, QMUL
# Developed for Bela: http://bela.io


# Prepare P9.27 as input (will be configured with pullup)
# via BB-BONE-PRU-BELA overlay

BUTTON_PIN=115

echo $BUTTON_PIN > /sys/class/gpio/export
echo in > /sys/class/gpio/gpio"$BUTTON_PIN"/direction

if [ ! -r /sys/class/gpio/gpio"$BUTTON_PIN"/value ]
then
	echo "$(basename $0): Unable to read GPIO pin $BUTTON_PIN for shutdown button."
	exit
fi

# First, wait for pin to go high. If it starts at 0, that's more
# likely that the GPIO is not set correctly, so do not treat this
# as a button press

while [ $(cat /sys/class/gpio/gpio"$BUTTON_PIN"/value) -ne 1 ]; do
	# Keep checking pin is readable in case it gets unexported
	if [ ! -r /sys/class/gpio/gpio"$BUTTON_PIN"/value ]
	then
		echo "$(basename $0): Unable to read GPIO pin $BUTTON_PIN for shutdown button."
		exit
	fi
	sleep 0.5
done

# Now for button press. Make sure the button is held at least
# 1 second before shutting down

PRESS_COUNT=0

while true; do
  # Keep checking pin is readable in case it gets unexported
  if [ ! -r /sys/class/gpio/gpio"$BUTTON_PIN"/value ]
  then
    echo "$(basename $0): Unable to read GPIO pin $BUTTON_PIN for shutdown button."
	exit
  fi
	
  # Button pressed? (pressed = low)
  if [ $(cat /sys/class/gpio/gpio"$BUTTON_PIN"/value) -eq 0 ]
  then
    PRESS_COUNT=$((PRESS_COUNT+1))
	if [ "$PRESS_COUNT" -ge 4 ]
	then
    	echo "$(basename $0): Shutdown button pressed. Halting system..."
		halt
		exit 1
	fi
  else
    PRESS_COUNT=0
  fi
  sleep 0.5
done