tomwalters@0: SILENT OPTIONS LIST: tomwalters@0: tomwalters@0: Silent options are a subset of the AIM options that are occasionally tomwalters@0: useful but not sufficiently important to be included in the options tomwalters@0: lists put out by the gen??? -help instructions. They are listed below tomwalters@0: with simple one line explanations. This is the full extent of the tomwalters@0: documentation for most of these options currently. Those with *** tomwalters@0: prior to the comment have a man-like entry in the second Section of tomwalters@0: this file. tomwalters@0: tomwalters@0: tomwalters@0: Option Name Default Comment tomwalters@0: ----------- ------- ------------------------------------------- tomwalters@0: tomwalters@0: test1 0 Dummy option for test and development /* MHA */ tomwalters@0: test2 0 Dummy option for test and development /* MHA */ tomwalters@0: test3 0 Dummy option for test and development /* MHA */ tomwalters@0: test4 0 Dummy option for test and development /* MHA */ tomwalters@0: tomwalters@0: ******** input/output options ********************************************** tomwalters@0: useprevious off *** Use previously stored output tomwalters@0: framenumber off Index of current frame (to stderr) tomwalters@0: review off Wait for keyboard between frames tomwalters@0: pstofile off Send PostScript output to .ps file tomwalters@0: bytemax tomwalters@0: type tomwalters@0: tomwalters@0: ******** display options *************************************************** tomwalters@0: overlap tomwalters@0: headroom tomwalters@0: perspective tomwalters@0: mono_ctn on Force monochrome (single plane) cartoons. tomwalters@0: colour_ctn off Force colour (multi-plane) cartoons. tomwalters@0: planemask_ctn 1 Planemask for creating cartoons. tomwalters@0: fg_col black Foreground Colour. tomwalters@0: bg_col white Background Colour. tomwalters@0: rotateaxes off Rotate the axes labels in .ps output tomwalters@0: tomwalters@0: ******** options to assist dtp of postscript (_ps) output ****************** tomwalters@0: xstart_ps x-axis: start point for ps plots /* MAA */ tomwalters@0: xend_ps x-axis: end point for ps plots. /* MAA */ tomwalters@0: ystart_ps y-axis: start point for ps plots. /* MAA */ tomwalters@0: yend_ps y-axis: end point for ps plots. /* MAA */ tomwalters@0: xtitle_ps x-axis: title for ps plots. /* MAA */ tomwalters@0: ytitle_ps y-axis: title for ps plots. /* MAA */ tomwalters@0: portrait_ps Use 'portrait' page format /* MAA */ tomwalters@0: landscape_ps Use 'landscape' page format /* MAA */ tomwalters@0: fontname_ps Helvetica Font for ps plots /* MAA */ tomwalters@0: fontsize_ps 12 Fontsize for ps plots (points) /* MAA */ tomwalters@0: fonttitlesize_ps 0 Fontsize for title (points) /* MAA */ tomwalters@0: axislinewidth_ps 1 Linewidth for axes/tick-marks (points) /* MAA */ tomwalters@0: figurelinewidth_ps 1 Linewidth for figures (points) /* MAA */ tomwalters@0: xticks_ps 6 Size of x-axis (big) ticks (points) /* MAA */ tomwalters@0: yticks_ps 6 Size of y-axis (big) ticks' (points) /* MAA */ tomwalters@0: outsideticks_ps on Print tick-marks 'outside' figure /* MAA */ tomwalters@0: axistop_ps on Print tick-marks on top side /* MAA */ tomwalters@0: axisbottom_ps on Print tick-marks on bottom side /* MAA */ tomwalters@0: axisleft_ps on Print tick-marks on left side /* MAA */ tomwalters@0: axisright_ps on Print tick-marks on right side /* MAA */ tomwalters@0: xmajorticks_ps 1 Relative *spacing* of ticks /* MAA */ tomwalters@0: xminorticks_ps 1 Relative *spacing* of ticks /* MAA */ tomwalters@0: ymajorticks_ps 1 Relative *spacing* of ticks /* MAA */ tomwalters@0: yminorticks_ps 1 Relative *spacing* of ticks /* MAA */ tomwalters@0: tomwalters@0: ******** internal variables for the transmission-line filterbank *********** tomwalters@0: upfactor auto Upsampling factor (off auto int) /* CG */ tomwalters@0: cutoff 1.0 LP cutoff as a fraction of Nyquist freq. /* CG */ tomwalters@0: downfactor auto Downsampling factor (off auto int) /* CG */ tomwalters@0: nconcha_ear 2 Number of segments in concha /* CG */ tomwalters@0: lconcha_ear 0.90 Total length of concha (cm) /* CG */ tomwalters@0: rconcha_ear 1.00 Radius of concha (cm) /* CG */ tomwalters@0: kconcha_ear 0.01 Attn. constant of concha (1/cm) /* CG */ tomwalters@0: ncanal_ear 4 Number of segments in ear canal /* CG */ tomwalters@0: lcanal_ear 2.85 Length of ear canal (cm) /* CG */ tomwalters@0: rcanal_ear 0.35 Radius of ear canal (cm) /* CG */ tomwalters@0: kcanal_ear 0.04 Attn. constant of ear canal (1/cm) /* CG */ tomwalters@0: interp_afb off Levels of interpolation to apply tomwalters@0: audiogram_afb off Audiogram equalisation parameter /* CG */ tomwalters@0: tomwalters@0: ********* options for lowpass filter between gt afb and 2D-AT ************** tomwalters@0: ltup_lpf 0.5ms Upward time constant in ms /* JH */ tomwalters@0: lstages_lpf off Stages of integration /* JH */ tomwalters@0: tomwalters@0: linear_sgm off Linear frequency axis for spectrograms /* JH */ tomwalters@0: power off Power of Compression /* JH */ tomwalters@0: tomwalters@0: exponential_decay off Exponential strobe Decay [ in gensai] /* AJD */ tomwalters@0: tomwalters@0: q or Q [Return] Quit animated display mode. tomwalters@0: tomwalters@0: tomwalters@0: tomwalters@0: tomwalters@0: tomwalters@0: overlap The overlap of transparent windows of the tomwalters@0: individual functions tomwalters@0: Scalar: percentage. Default value: 50% tomwalters@0: tomwalters@0: The fact that the output functions are related means that they fit up tomwalters@0: under each other in the display in a way that concentrates the lines tomwalters@0: on the landscape and improves the display. tomwalters@0: tomwalters@0: headroom Display with headroom for the uppermost channel tomwalters@0: Scalar: percentage. Default value: 0% tomwalters@0: tomwalters@0: Because of the overlap of the transparent windows, part of the upper- tomwalters@0: most transparent window is hidden by the upper edge of the display tomwalters@0: window. This can cause truncation of the waves in the upper channels. tomwalters@0: To avoid truncation, headroom enables the user to specify that the tomwalters@0: highest channel ought to be centred below the upper edge of the win- tomwalters@0: dow. The value specified is taken to be the percentage of the window tomwalters@0: between the zero line of the upper channel and the upper edge of the tomwalters@0: window. tomwalters@0: tomwalters@0: tomwalters@0: tomwalters@0: useprevious tomwalters@0: tomwalters@0: Command line options override the non-auditory options in the header tomwalters@0: of a reused file (ie. useprevious=on). tomwalters@0: tomwalters@0: Note: length=remainder gets the whole of the reused file. Otherwise you get tomwalters@0: the amount you request (or the default length if no option is given). tomwalters@0: tomwalters@0: BUG: AIM will allow you to overwrite of the channels option, but it tomwalters@0: will not act appropriately. It would need it to change the frame size, tomwalters@0: which in turn would require knowledge of the file format which it does tomwalters@0: not currently have.)